1 #Version check for XTRA 2 #DISABLE = 0 3 #AUTO = 1 4 #XTRA2 = 2 5 #XTRA3 = 3 6 XTRA_VERSION_CHECK=1 7 8 # Error Estimate 9 # _SET = 1 10 # _CLEAR = 0 11 ERR_ESTIMATE=0 12 13 #Test 14 #NTP_SERVER=time.gpsonextra.net 15 #Asia 16 # NTP_SERVER=asia.pool.ntp.org 17 #Europe 18 # NTP_SERVER=europe.pool.ntp.org 19 #North America 20 # NTP_SERVER=north-america.pool.ntp.org 21 22 # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info 23 # 4 - Debug, 5 - Verbose 24 # If DEBUG_LEVEL is commented, Android's logging levels will be used 25 DEBUG_LEVEL = 2 26 27 # Intermediate position report, 1=enable, 0=disable 28 INTERMEDIATE_POS=0 29 30 # Below bit mask configures how GPS functionalities 31 # should be locked when user turns off GPS on Settings 32 # Set bit 0x1 if MO GPS functionalities are to be locked 33 # Set bit 0x2 if NI GPS functionalities are to be locked 34 # default - non is locked for backward compatibility 35 #GPS_LOCK = 0 36 37 # supl version 1.0 38 #SUPL_VER=0x10000 39 40 # Emergency SUPL, 1=enable, 0=disable 41 #SUPL_ES=1 42 43 #Choose PDN for Emergency SUPL 44 #1 - Use emergency PDN 45 #0 - Use regular SUPL PDN for Emergency SUPL 46 USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1 47 48 #SUPL_MODE is a bit mask set in config.xml per carrier by default. 49 #If it is uncommented here, this value will over write the value from 50 #config.xml. 51 #MSA=0X2 52 #MSB=0X1 53 #SUPL_MODE= 54 55 # GPS Capabilities bit mask 56 # SCHEDULING = 0x01 57 # MSB = 0x02 58 # MSA = 0x04 59 # ON_DEMAND_TIME = 0x10 60 # GEOFENCE = 0x20 61 # default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE 62 CAPABILITIES=0x37 63 64 # Accuracy threshold for intermediate positions 65 # less accurate positions are ignored, 0 for passing all positions 66 # ACCURACY_THRES=5000 67 68 ################################ 69 ##### AGPS server settings ##### 70 ################################ 71 72 # FOR SUPL SUPPORT, set the following 73 # SUPL_HOST=supl.host.com or IP 74 # SUPL_PORT=1234 75 76 # FOR C2K PDE SUPPORT, set the following 77 # C2K_HOST=c2k.pde.com or IP 78 # C2K_PORT=1234 79 80 # Bitmask of slots that are available 81 # for write/install to, where 1s indicate writable, 82 # and the default value is 0 where no slots 83 # are writable. For example, AGPS_CERT_WRITABLE_MASK 84 # of b1000001010 makes 3 slots available 85 # and the remaining 7 slots unwritable. 86 #AGPS_CERT_WRITABLE_MASK=0 87 88 #################################### 89 # LTE Positioning Profile Settings 90 #################################### 91 # 0: Enable RRLP on LTE(Default) 92 # 1: Enable LPP_User_Plane on LTE 93 # 2: Enable LPP_Control_Plane 94 # 3: Enable both LPP_User_Plane and LPP_Control_Plane 95 #LPP_PROFILE = 0 96 97 ################################ 98 # EXTRA SETTINGS 99 ################################ 100 # NMEA provider (1=Modem Processor, 0=Application Processor) 101 NMEA_PROVIDER=0 102 # Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE) 103 SGLTE_TARGET=0 104 105 ################################################## 106 # Select Positioning Protocol on A-GLONASS system 107 ################################################## 108 # 0x1: RRC CPlane 109 # 0x2: RRLP UPlane 110 # 0x4: LLP Uplane 111 #A_GLONASS_POS_PROTOCOL_SELECT = 0 112
