1 #Version check for XTRA 2 #DISABLE = 0 3 #AUTO = 1 4 #XTRA2 = 2 5 #XTRA3 = 3 6 XTRA_VERSION_CHECK=1 7 8 # Error Estimate 9 # _SET = 1 10 # _CLEAR = 0 11 ERR_ESTIMATE=0 12 13 # NTP Server 14 # NTP_SERVER=time.gpsonextra.net 15 # Asia 16 # NTP_SERVER=asia.pool.ntp.org 17 # Europe 18 # NTP_SERVER=europe.pool.ntp.org 19 # North America 20 # NTP_SERVER=north-america.pool.ntp.org 21 22 NTP_SERVER = time.google.com 23 24 # If NTP_SERVER is commented NTP_SERVER=time.izatcloud.net is used 25 26 # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info 27 # 4 - Debug, 5 - Verbose 28 # If DEBUG_LEVEL is commented, Android's logging levels will be used 29 DEBUG_LEVEL = 3 30 31 # Intermediate position report, 1=enable, 0=disable 32 INTERMEDIATE_POS=0 33 34 # GPS Capabilities bit mask 35 # SCHEDULING = 0x01 36 # MSB = 0x02 37 # MSA = 0x04 38 # ON_DEMAND_TIME = 0x10 39 # GEOFENCE = 0x20 40 # default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE 41 CAPABILITIES=0x37 42 43 # Accuracy threshold for intermediate positions 44 # less accurate positions are ignored, 0 for passing all positions 45 # ACCURACY_THRES=5000 46 47 ################################ 48 ##### AGPS server settings ##### 49 ################################ 50 # Bitmask of slots that are available 51 # for write/install to, where 1s indicate writable, 52 # and the default value is 0 where no slots 53 # are writable. For example, AGPS_CERT_WRITABLE_MASK 54 # of b1000001010 makes 3 slots available 55 # and the remaining 7 slots unwritable. 56 # AGPS_CERT_WRITABLE_MASK=0 57 58 ################################ 59 # EXTRA SETTINGS 60 ################################ 61 # NMEA provider (1=Modem Processor, 0=Application Processor) 62 NMEA_PROVIDER=0 63 64 # Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE) 65 SGLTE_TARGET=0 66 67 ################################################## 68 # Select technology for LPPe Control Plane 69 ################################################## 70 # 0x1: DBH for LPPe CP 71 # 0x2: WLAN AP Measurements for LPPe CP 72 LPPE_CP_TECHNOLOGY = 0 73 74 ################################################## 75 # Select technology for LPPe User Plane 76 ################################################## 77 # 0x1: DBH for LPPe UP 78 # 0x2: WLAN AP Measurements for LPPe UP 79 LPPE_UP_TECHNOLOGY = 0 80 81 ################################################## 82 # AGPS_CONFIG_INJECT 83 ################################################## 84 # enable/disable injection of AGPS configurations: 85 # SUPL_VER 86 # SUPL_HOST 87 # SUPL_PORT 88 # SUPL_MODE 89 # SUPL_ES 90 # C2K_HOST 91 # C2K_PORT 92 # LPP_PROFILE 93 # A_GLONASS_POS_PROTOCOL_SELECT 94 # USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL 95 # GPS_LOCK 96 # 0: disable 97 # 1: enable 98 AGPS_CONFIG_INJECT = 1 99 100 # AP Coarse Timestamp Uncertainty 101 ################################################## 102 # default : 10 103 # or as per clock uncertainty of product 104 AP_TIMESTAMP_UNCERTAINTY = 10 105 106 ##################################### 107 #DR_SYNC Pulse Availability 108 ##################################### 109 # 0 : DR_SYNC pulse not available (default) 110 # 1 : DR_SYNC pulse available 111 DR_SYNC_ENABLED = 0 112 113 ##################################### 114 #PPS Device name 115 ##################################### 116 PPS_DEVICENAME = /dev/pps0 117 118 ##################################### 119 #AP Clock Accuracy 120 ##################################### 121 AP_CLOCK_PPM = 100 122 123 ##################################### 124 #MAX ms difference to detect missing pulse 125 ##################################### 126 MISSING_PULSE_TIME_DELTA = 900 127 128 ##################################### 129 #Propagation time uncertainty 130 ##################################### 131 PROPAGATION_TIME_UNCERTAINTY = 1 132
