Home | History | Annotate | Download | only in doc
      1 # Doxyfile 1.4.2
      2 
      3 # This file describes the settings to be used by the documentation system
      4 # doxygen (www.doxygen.org) for a project
      5 #
      6 # All text after a hash (#) is considered a comment and will be ignored
      7 # The format is:
      8 #       TAG = value [value, ...]
      9 # For lists items can also be appended using:
     10 #       TAG += value [value, ...]
     11 # Values that contain spaces should be placed between quotes (" ")
     12 
     13 #---------------------------------------------------------------------------
     14 # Project related configuration options
     15 #---------------------------------------------------------------------------
     16 
     17 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded 
     18 # by quotes) that should identify the project.
     19 
     20 PROJECT_NAME           = "@PACKAGE_NAME@ (@PACKAGE_TARNAME@) Internals"
     21 
     22 # The PROJECT_NUMBER tag can be used to enter a project or revision number. 
     23 # This could be handy for archiving the generated documentation or 
     24 # if some version control system is used.
     25 
     26 PROJECT_NUMBER         = "@PACKAGE_VERSION@"
     27 
     28 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 
     29 # base path where the generated documentation will be put. 
     30 # If a relative path is entered, it will be relative to the location 
     31 # where doxygen was started. If left blank the current directory will be used.
     32 
     33 OUTPUT_DIRECTORY       = @DOXYGEN_OUTPUT_DIR@
     34 
     35 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 
     36 # 4096 sub-directories (in 2 levels) under the output directory of each output 
     37 # format and will distribute the generated files over these directories. 
     38 # Enabling this option can be useful when feeding doxygen a huge amount of 
     39 # source files, where putting all generated files in the same directory would 
     40 # otherwise cause performance problems for the file system.
     41 
     42 CREATE_SUBDIRS         = NO
     43 
     44 # The OUTPUT_LANGUAGE tag is used to specify the language in which all 
     45 # documentation generated by doxygen is written. Doxygen will use this 
     46 # information to generate all constant output in the proper language. 
     47 # The default language is English, other supported languages are: 
     48 # Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, 
     49 # Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese, 
     50 # Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian, 
     51 # Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, 
     52 # Swedish, and Ukrainian.
     53 
     54 OUTPUT_LANGUAGE        = English
     55 
     56 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will 
     57 # include brief member descriptions after the members that are listed in 
     58 # the file and class documentation (similar to JavaDoc). 
     59 # Set to NO to disable this.
     60 
     61 BRIEF_MEMBER_DESC      = YES
     62 
     63 # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend 
     64 # the brief description of a member or function before the detailed description. 
     65 # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the 
     66 # brief descriptions will be completely suppressed.
     67 
     68 REPEAT_BRIEF           = YES
     69 
     70 # This tag implements a quasi-intelligent brief description abbreviator 
     71 # that is used to form the text in various listings. Each string 
     72 # in this list, if found as the leading text of the brief description, will be 
     73 # stripped from the text and the result after processing the whole list, is 
     74 # used as the annotated text. Otherwise, the brief description is used as-is. 
     75 # If left blank, the following values are used ("$name" is automatically 
     76 # replaced with the name of the entity): "The $name class" "The $name widget" 
     77 # "The $name file" "is" "provides" "specifies" "contains" 
     78 # "represents" "a" "an" "the"
     79 
     80 ABBREVIATE_BRIEF       = 
     81 
     82 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then 
     83 # Doxygen will generate a detailed section even if there is only a brief 
     84 # description.
     85 
     86 ALWAYS_DETAILED_SEC    = NO
     87 
     88 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all 
     89 # inherited members of a class in the documentation of that class as if those 
     90 # members were ordinary class members. Constructors, destructors and assignment 
     91 # operators of the base classes will not be shown.
     92 
     93 INLINE_INHERITED_MEMB  = NO
     94 
     95 # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full 
     96 # path before files name in the file list and in the header files. If set 
     97 # to NO the shortest path that makes the file name unique will be used.
     98 
     99 FULL_PATH_NAMES        = YES
    100 
    101 # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag 
    102 # can be used to strip a user-defined part of the path. Stripping is 
    103 # only done if one of the specified strings matches the left-hand part of 
    104 # the path. The tag can be used to show relative paths in the file list. 
    105 # If left blank the directory from which doxygen is run is used as the 
    106 # path to strip.
    107 
    108 STRIP_FROM_PATH        = @top_srcdir@
    109 
    110 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of 
    111 # the path mentioned in the documentation of a class, which tells 
    112 # the reader which header file to include in order to use a class. 
    113 # If left blank only the name of the header file containing the class 
    114 # definition is used. Otherwise one should specify the include paths that 
    115 # are normally passed to the compiler using the -I flag.
    116 
    117 STRIP_FROM_INC_PATH    = 
    118 
    119 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter 
    120 # (but less readable) file names. This can be useful is your file systems 
    121 # doesn't support long names like on DOS, Mac, or CD-ROM.
    122 
    123 SHORT_NAMES            = NO
    124 
    125 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen 
    126 # will interpret the first line (until the first dot) of a JavaDoc-style 
    127 # comment as the brief description. If set to NO, the JavaDoc 
    128 # comments will behave just like the Qt-style comments (thus requiring an 
    129 # explicit @brief command for a brief description.
    130 
    131 JAVADOC_AUTOBRIEF      = NO
    132 
    133 # If the QT_AUTOBRIEF tag is set to YES then Doxygen will 
    134 # interpret the first line (until the first dot) of a Qt-style 
    135 # comment as the brief description. If set to NO, the comments 
    136 # will behave just like regular Qt-style comments (thus requiring 
    137 # an explicit \brief command for a brief description.)
    138 
    139 QT_AUTOBRIEF           = YES
    140 
    141 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen 
    142 # treat a multi-line C++ special comment block (i.e. a block of //! or /// 
    143 # comments) as a brief description. This used to be the default behaviour. 
    144 # The new default is to treat a multi-line C++ comment block as a detailed 
    145 # description. Set this tag to YES if you prefer the old behaviour instead.
    146 
    147 MULTILINE_CPP_IS_BRIEF = NO
    148 
    149 # If the DETAILS_AT_TOP tag is set to YES then Doxygen 
    150 # will output the detailed description near the top, like JavaDoc.
    151 # If set to NO, the detailed description appears after the member 
    152 # documentation.
    153 
    154 DETAILS_AT_TOP         = NO
    155 
    156 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented 
    157 # member inherits the documentation from any documented member that it 
    158 # re-implements.
    159 
    160 INHERIT_DOCS           = YES
    161 
    162 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 
    163 # tag is set to YES, then doxygen will reuse the documentation of the first 
    164 # member in the group (if any) for the other members of the group. By default 
    165 # all members of a group must be documented explicitly.
    166 
    167 DISTRIBUTE_GROUP_DOC   = NO
    168 
    169 # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce 
    170 # a new page for each member. If set to NO, the documentation of a member will 
    171 # be part of the file/class/namespace that contains it.
    172 
    173 SEPARATE_MEMBER_PAGES  = NO
    174 
    175 # The TAB_SIZE tag can be used to set the number of spaces in a tab. 
    176 # Doxygen uses this value to replace tabs by spaces in code fragments.
    177 
    178 TAB_SIZE               = 8
    179 
    180 # This tag can be used to specify a number of aliases that acts 
    181 # as commands in the documentation. An alias has the form "name=value". 
    182 # For example adding "sideeffect=\par Side Effects:\n" will allow you to 
    183 # put the command \sideeffect (or @sideeffect) in the documentation, which 
    184 # will result in a user-defined paragraph with heading "Side Effects:". 
    185 # You can put \n's in the value part of an alias to insert newlines.
    186 
    187 ALIASES                = 
    188 
    189 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C 
    190 # sources only. Doxygen will then generate output that is more tailored for C. 
    191 # For instance, some of the names that are used will be different. The list 
    192 # of all members will be omitted, etc.
    193 
    194 OPTIMIZE_OUTPUT_FOR_C  = YES
    195 
    196 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources 
    197 # only. Doxygen will then generate output that is more tailored for Java. 
    198 # For instance, namespaces will be presented as packages, qualified scopes 
    199 # will look different, etc.
    200 
    201 OPTIMIZE_OUTPUT_JAVA   = NO
    202 
    203 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of 
    204 # the same type (for instance a group of public functions) to be put as a 
    205 # subgroup of that type (e.g. under the Public Functions section). Set it to 
    206 # NO to prevent subgrouping. Alternatively, this can be done per class using 
    207 # the \nosubgrouping command.
    208 
    209 SUBGROUPING            = YES
    210 
    211 #---------------------------------------------------------------------------
    212 # Build related configuration options
    213 #---------------------------------------------------------------------------
    214 
    215 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in 
    216 # documentation are documented, even if no documentation was available. 
    217 # Private class members and static file members will be hidden unless 
    218 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
    219 
    220 EXTRACT_ALL            = YES
    221 
    222 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class 
    223 # will be included in the documentation.
    224 
    225 EXTRACT_PRIVATE        = YES
    226 
    227 # If the EXTRACT_STATIC tag is set to YES all static members of a file 
    228 # will be included in the documentation.
    229 
    230 EXTRACT_STATIC         = YES
    231 
    232 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) 
    233 # defined locally in source files will be included in the documentation. 
    234 # If set to NO only classes defined in header files are included.
    235 
    236 EXTRACT_LOCAL_CLASSES  = YES
    237 
    238 # This flag is only useful for Objective-C code. When set to YES local 
    239 # methods, which are defined in the implementation section but not in 
    240 # the interface are included in the documentation. 
    241 # If set to NO (the default) only methods in the interface are included.
    242 
    243 EXTRACT_LOCAL_METHODS  = NO
    244 
    245 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all 
    246 # undocumented members of documented classes, files or namespaces. 
    247 # If set to NO (the default) these members will be included in the 
    248 # various overviews, but no documentation section is generated. 
    249 # This option has no effect if EXTRACT_ALL is enabled.
    250 
    251 HIDE_UNDOC_MEMBERS     = NO
    252 
    253 # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all 
    254 # undocumented classes that are normally visible in the class hierarchy. 
    255 # If set to NO (the default) these classes will be included in the various 
    256 # overviews. This option has no effect if EXTRACT_ALL is enabled.
    257 
    258 HIDE_UNDOC_CLASSES     = NO
    259 
    260 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all 
    261 # friend (class|struct|union) declarations. 
    262 # If set to NO (the default) these declarations will be included in the 
    263 # documentation.
    264 
    265 HIDE_FRIEND_COMPOUNDS  = NO
    266 
    267 # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any 
    268 # documentation blocks found inside the body of a function. 
    269 # If set to NO (the default) these blocks will be appended to the 
    270 # function's detailed documentation block.
    271 
    272 HIDE_IN_BODY_DOCS      = NO
    273 
    274 # The INTERNAL_DOCS tag determines if documentation 
    275 # that is typed after a \internal command is included. If the tag is set 
    276 # to NO (the default) then the documentation will be excluded. 
    277 # Set it to YES to include the internal documentation.
    278 
    279 INTERNAL_DOCS          = YES
    280 
    281 # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate 
    282 # file names in lower-case letters. If set to YES upper-case letters are also 
    283 # allowed. This is useful if you have classes or files whose names only differ 
    284 # in case and if your file system supports case sensitive file names. Windows 
    285 # and Mac users are advised to set this option to NO.
    286 
    287 CASE_SENSE_NAMES       = YES
    288 
    289 # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen 
    290 # will show members with their full class and namespace scopes in the 
    291 # documentation. If set to YES the scope will be hidden.
    292 
    293 HIDE_SCOPE_NAMES       = NO
    294 
    295 # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen 
    296 # will put a list of the files that are included by a file in the documentation 
    297 # of that file.
    298 
    299 SHOW_INCLUDE_FILES     = YES
    300 
    301 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline] 
    302 # is inserted in the documentation for inline members.
    303 
    304 INLINE_INFO            = YES
    305 
    306 # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen 
    307 # will sort the (detailed) documentation of file and class members 
    308 # alphabetically by member name. If set to NO the members will appear in 
    309 # declaration order.
    310 
    311 SORT_MEMBER_DOCS       = YES
    312 
    313 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the 
    314 # brief documentation of file, namespace and class members alphabetically 
    315 # by member name. If set to NO (the default) the members will appear in 
    316 # declaration order.
    317 
    318 SORT_BRIEF_DOCS        = NO
    319 
    320 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be 
    321 # sorted by fully-qualified names, including namespaces. If set to 
    322 # NO (the default), the class list will be sorted only by class name, 
    323 # not including the namespace part. 
    324 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
    325 # Note: This option applies only to the class list, not to the 
    326 # alphabetical list.
    327 
    328 SORT_BY_SCOPE_NAME     = NO
    329 
    330 # The GENERATE_TODOLIST tag can be used to enable (YES) or 
    331 # disable (NO) the todo list. This list is created by putting \todo 
    332 # commands in the documentation.
    333 
    334 GENERATE_TODOLIST      = YES
    335 
    336 # The GENERATE_TESTLIST tag can be used to enable (YES) or 
    337 # disable (NO) the test list. This list is created by putting \test 
    338 # commands in the documentation.
    339 
    340 GENERATE_TESTLIST      = YES
    341 
    342 # The GENERATE_BUGLIST tag can be used to enable (YES) or 
    343 # disable (NO) the bug list. This list is created by putting \bug 
    344 # commands in the documentation.
    345 
    346 GENERATE_BUGLIST       = YES
    347 
    348 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or 
    349 # disable (NO) the deprecated list. This list is created by putting 
    350 # \deprecated commands in the documentation.
    351 
    352 GENERATE_DEPRECATEDLIST= YES
    353 
    354 # The ENABLED_SECTIONS tag can be used to enable conditional 
    355 # documentation sections, marked by \if sectionname ... \endif.
    356 
    357 ENABLED_SECTIONS       = 
    358 
    359 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines 
    360 # the initial value of a variable or define consists of for it to appear in 
    361 # the documentation. If the initializer consists of more lines than specified 
    362 # here it will be hidden. Use a value of 0 to hide initializers completely. 
    363 # The appearance of the initializer of individual variables and defines in the 
    364 # documentation can be controlled using \showinitializer or \hideinitializer 
    365 # command in the documentation regardless of this setting.
    366 
    367 MAX_INITIALIZER_LINES  = 30
    368 
    369 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated 
    370 # at the bottom of the documentation of classes and structs. If set to YES the 
    371 # list will mention the files that were used to generate the documentation.
    372 
    373 SHOW_USED_FILES        = YES
    374 
    375 # If the sources in your project are distributed over multiple directories 
    376 # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy 
    377 # in the documentation.
    378 
    379 SHOW_DIRECTORIES       = YES
    380 
    381 # The FILE_VERSION_FILTER tag can be used to specify a program or script that 
    382 # doxygen should invoke to get the current version for each file (typically from the 
    383 # version control system). Doxygen will invoke the program by executing (via 
    384 # popen()) the command <command> <input-file>, where <command> is the value of 
    385 # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file 
    386 # provided by doxygen. Whatever the progam writes to standard output 
    387 # is used as the file version. See the manual for examples.
    388 
    389 FILE_VERSION_FILTER    = 
    390 
    391 #---------------------------------------------------------------------------
    392 # configuration options related to warning and progress messages
    393 #---------------------------------------------------------------------------
    394 
    395 # The QUIET tag can be used to turn on/off the messages that are generated 
    396 # by doxygen. Possible values are YES and NO. If left blank NO is used.
    397 
    398 QUIET                  = NO
    399 
    400 # The WARNINGS tag can be used to turn on/off the warning messages that are 
    401 # generated by doxygen. Possible values are YES and NO. If left blank 
    402 # NO is used.
    403 
    404 WARNINGS               = YES
    405 
    406 # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings 
    407 # for undocumented members. If EXTRACT_ALL is set to YES then this flag will 
    408 # automatically be disabled.
    409 
    410 WARN_IF_UNDOCUMENTED   = YES
    411 
    412 # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for 
    413 # potential errors in the documentation, such as not documenting some 
    414 # parameters in a documented function, or documenting parameters that 
    415 # don't exist or using markup commands wrongly.
    416 
    417 WARN_IF_DOC_ERROR      = YES
    418 
    419 # This WARN_NO_PARAMDOC option can be abled to get warnings for 
    420 # functions that are documented, but have no documentation for their parameters 
    421 # or return value. If set to NO (the default) doxygen will only warn about 
    422 # wrong or incomplete parameter documentation, but not about the absence of 
    423 # documentation.
    424 
    425 WARN_NO_PARAMDOC       = YES
    426 
    427 # The WARN_FORMAT tag determines the format of the warning messages that 
    428 # doxygen can produce. The string should contain the $file, $line, and $text 
    429 # tags, which will be replaced by the file and line number from which the 
    430 # warning originated and the warning text. Optionally the format may contain 
    431 # $version, which will be replaced by the version of the file (if it could 
    432 # be obtained via FILE_VERSION_FILTER)
    433 
    434 WARN_FORMAT            = "$file:$line: $text"
    435 
    436 # The WARN_LOGFILE tag can be used to specify a file to which warning 
    437 # and error messages should be written. If left blank the output is written 
    438 # to stderr.
    439 
    440 WARN_LOGFILE           = 
    441 
    442 #---------------------------------------------------------------------------
    443 # configuration options related to the input files
    444 #---------------------------------------------------------------------------
    445 
    446 # The INPUT tag can be used to specify the files and/or directories that contain 
    447 # documented source files. You may enter file names like "myfile.cpp" or 
    448 # directories like "/usr/src/myproject". Separate the files or directories 
    449 # with spaces.
    450 
    451 INPUT                  = @top_srcdir@/libexif @top_srcdir@/test
    452 
    453 # If the value of the INPUT tag contains directories, you can use the 
    454 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
    455 # and *.h) to filter out the source-files in the directories. If left 
    456 # blank the following patterns are tested: 
    457 # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx 
    458 # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm
    459 
    460 FILE_PATTERNS          = *.h *.c
    461 
    462 # The RECURSIVE tag can be used to turn specify whether or not subdirectories 
    463 # should be searched for input files as well. Possible values are YES and NO. 
    464 # If left blank NO is used.
    465 
    466 RECURSIVE              = YES
    467 
    468 # The EXCLUDE tag can be used to specify files and/or directories that should 
    469 # excluded from the INPUT source files. This way you can easily exclude a 
    470 # subdirectory from a directory tree whose root is specified with the INPUT tag.
    471 
    472 EXCLUDE                = 
    473 
    474 # The EXCLUDE_SYMLINKS tag can be used select whether or not files or 
    475 # directories that are symbolic links (a Unix filesystem feature) are excluded 
    476 # from the input.
    477 
    478 EXCLUDE_SYMLINKS       = NO
    479 
    480 # If the value of the INPUT tag contains directories, you can use the 
    481 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude 
    482 # certain files from those directories.
    483 
    484 EXCLUDE_PATTERNS       = 
    485 
    486 # The EXAMPLE_PATH tag can be used to specify one or more files or 
    487 # directories that contain example code fragments that are included (see 
    488 # the \include command).
    489 
    490 EXAMPLE_PATH           = 
    491 
    492 # If the value of the EXAMPLE_PATH tag contains directories, you can use the 
    493 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
    494 # and *.h) to filter out the source-files in the directories. If left 
    495 # blank all files are included.
    496 
    497 EXAMPLE_PATTERNS       = 
    498 
    499 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be 
    500 # searched for input files to be used with the \include or \dontinclude 
    501 # commands irrespective of the value of the RECURSIVE tag. 
    502 # Possible values are YES and NO. If left blank NO is used.
    503 
    504 EXAMPLE_RECURSIVE      = NO
    505 
    506 # The IMAGE_PATH tag can be used to specify one or more files or 
    507 # directories that contain image that are included in the documentation (see 
    508 # the \image command).
    509 
    510 IMAGE_PATH             = 
    511 
    512 # The INPUT_FILTER tag can be used to specify a program that doxygen should 
    513 # invoke to filter for each input file. Doxygen will invoke the filter program 
    514 # by executing (via popen()) the command <filter> <input-file>, where <filter> 
    515 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an 
    516 # input file. Doxygen will then use the output that the filter program writes 
    517 # to standard output.  If FILTER_PATTERNS is specified, this tag will be 
    518 # ignored.
    519 
    520 INPUT_FILTER           = 
    521 
    522 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern 
    523 # basis.  Doxygen will compare the file name with each pattern and apply the 
    524 # filter if there is a match.  The filters are a list of the form: 
    525 # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further 
    526 # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER 
    527 # is applied to all files.
    528 
    529 FILTER_PATTERNS        = 
    530 
    531 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using 
    532 # INPUT_FILTER) will be used to filter the input files when producing source 
    533 # files to browse (i.e. when SOURCE_BROWSER is set to YES).
    534 
    535 FILTER_SOURCE_FILES    = NO
    536 
    537 #---------------------------------------------------------------------------
    538 # configuration options related to source browsing
    539 #---------------------------------------------------------------------------
    540 
    541 # If the SOURCE_BROWSER tag is set to YES then a list of source files will 
    542 # be generated. Documented entities will be cross-referenced with these sources. 
    543 # Note: To get rid of all source code in the generated output, make sure also 
    544 # VERBATIM_HEADERS is set to NO.
    545 
    546 SOURCE_BROWSER         = YES
    547 
    548 # Setting the INLINE_SOURCES tag to YES will include the body 
    549 # of functions and classes directly in the documentation.
    550 
    551 INLINE_SOURCES         = NO
    552 
    553 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct 
    554 # doxygen to hide any special comment blocks from generated source code 
    555 # fragments. Normal C and C++ comments will always remain visible.
    556 
    557 STRIP_CODE_COMMENTS    = YES
    558 
    559 # If the REFERENCED_BY_RELATION tag is set to YES (the default) 
    560 # then for each documented function all documented 
    561 # functions referencing it will be listed.
    562 
    563 REFERENCED_BY_RELATION = YES
    564 
    565 # If the REFERENCES_RELATION tag is set to YES (the default) 
    566 # then for each documented function all documented entities 
    567 # called/used by that function will be listed.
    568 
    569 REFERENCES_RELATION    = YES
    570 
    571 # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen 
    572 # will generate a verbatim copy of the header file for each class for 
    573 # which an include is specified. Set to NO to disable this.
    574 
    575 VERBATIM_HEADERS       = YES
    576 
    577 #---------------------------------------------------------------------------
    578 # configuration options related to the alphabetical class index
    579 #---------------------------------------------------------------------------
    580 
    581 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index 
    582 # of all compounds will be generated. Enable this if the project 
    583 # contains a lot of classes, structs, unions or interfaces.
    584 
    585 ALPHABETICAL_INDEX     = YES
    586 
    587 # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then 
    588 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns 
    589 # in which this list will be split (can be a number in the range [1..20])
    590 
    591 COLS_IN_ALPHA_INDEX    = 5
    592 
    593 # In case all classes in a project start with a common prefix, all 
    594 # classes will be put under the same header in the alphabetical index. 
    595 # The IGNORE_PREFIX tag can be used to specify one or more prefixes that 
    596 # should be ignored while generating the index headers.
    597 
    598 IGNORE_PREFIX          = _
    599 
    600 #---------------------------------------------------------------------------
    601 # configuration options related to the HTML output
    602 #---------------------------------------------------------------------------
    603 
    604 # If the GENERATE_HTML tag is set to YES (the default) Doxygen will 
    605 # generate HTML output.
    606 
    607 GENERATE_HTML          = YES
    608 
    609 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. 
    610 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
    611 # put in front of it. If left blank `html' will be used as the default path.
    612 
    613 HTML_OUTPUT            = @HTML_APIDOC_INTERNALS_DIR@
    614 
    615 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for 
    616 # each generated HTML page (for example: .htm,.php,.asp). If it is left blank 
    617 # doxygen will generate files with .html extension.
    618 
    619 HTML_FILE_EXTENSION    = .html
    620 
    621 # The HTML_HEADER tag can be used to specify a personal HTML header for 
    622 # each generated HTML page. If it is left blank doxygen will generate a 
    623 # standard header.
    624 
    625 HTML_HEADER            = 
    626 
    627 # The HTML_FOOTER tag can be used to specify a personal HTML footer for 
    628 # each generated HTML page. If it is left blank doxygen will generate a 
    629 # standard footer.
    630 
    631 @MAINTAINER_MODE_TRUE@HTML_FOOTER            = @srcdir@/footer.html
    632 
    633 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading 
    634 # style sheet that is used by each HTML page. It can be used to 
    635 # fine-tune the look of the HTML output. If the tag is left blank doxygen 
    636 # will generate a default style sheet. Note that doxygen will try to copy 
    637 # the style sheet file to the HTML output directory, so don't put your own 
    638 # stylesheet in the HTML output directory as well, or it will be erased!
    639 
    640 HTML_STYLESHEET        = 
    641 
    642 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, 
    643 # files or namespaces will be aligned in HTML using tables. If set to 
    644 # NO a bullet list will be used.
    645 
    646 HTML_ALIGN_MEMBERS     = YES
    647 
    648 # If the GENERATE_HTMLHELP tag is set to YES, additional index files 
    649 # will be generated that can be used as input for tools like the 
    650 # Microsoft HTML help workshop to generate a compressed HTML help file (.chm) 
    651 # of the generated HTML documentation.
    652 
    653 GENERATE_HTMLHELP      = NO
    654 
    655 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can 
    656 # be used to specify the file name of the resulting .chm file. You 
    657 # can add a path in front of the file if the result should not be 
    658 # written to the html output directory.
    659 
    660 CHM_FILE               = 
    661 
    662 # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can 
    663 # be used to specify the location (absolute path including file name) of 
    664 # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run 
    665 # the HTML help compiler on the generated index.hhp.
    666 
    667 HHC_LOCATION           = 
    668 
    669 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag 
    670 # controls if a separate .chi index file is generated (YES) or that 
    671 # it should be included in the master .chm file (NO).
    672 
    673 GENERATE_CHI           = NO
    674 
    675 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag 
    676 # controls whether a binary table of contents is generated (YES) or a 
    677 # normal table of contents (NO) in the .chm file.
    678 
    679 BINARY_TOC             = NO
    680 
    681 # The TOC_EXPAND flag can be set to YES to add extra items for group members 
    682 # to the contents of the HTML help documentation and to the tree view.
    683 
    684 TOC_EXPAND             = NO
    685 
    686 # The DISABLE_INDEX tag can be used to turn on/off the condensed index at 
    687 # top of each HTML page. The value NO (the default) enables the index and 
    688 # the value YES disables it.
    689 
    690 DISABLE_INDEX          = NO
    691 
    692 # This tag can be used to set the number of enum values (range [1..20]) 
    693 # that doxygen will group on one line in the generated HTML documentation.
    694 
    695 ENUM_VALUES_PER_LINE   = 4
    696 
    697 # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
    698 # generated containing a tree-like index structure (just like the one that 
    699 # is generated for HTML Help). For this to work a browser that supports 
    700 # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, 
    701 # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are 
    702 # probably better off using the HTML help feature.
    703 
    704 GENERATE_TREEVIEW      = YES
    705 
    706 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be 
    707 # used to set the initial width (in pixels) of the frame in which the tree 
    708 # is shown.
    709 
    710 TREEVIEW_WIDTH         = 250
    711 
    712 #---------------------------------------------------------------------------
    713 # configuration options related to the LaTeX output
    714 #---------------------------------------------------------------------------
    715 
    716 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will 
    717 # generate Latex output.
    718 
    719 GENERATE_LATEX         = NO
    720 
    721 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. 
    722 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
    723 # put in front of it. If left blank `latex' will be used as the default path.
    724 
    725 LATEX_OUTPUT           = latex
    726 
    727 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be 
    728 # invoked. If left blank `latex' will be used as the default command name.
    729 
    730 LATEX_CMD_NAME         = latex
    731 
    732 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to 
    733 # generate index for LaTeX. If left blank `makeindex' will be used as the 
    734 # default command name.
    735 
    736 MAKEINDEX_CMD_NAME     = makeindex
    737 
    738 # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact 
    739 # LaTeX documents. This may be useful for small projects and may help to 
    740 # save some trees in general.
    741 
    742 COMPACT_LATEX          = NO
    743 
    744 # The PAPER_TYPE tag can be used to set the paper type that is used 
    745 # by the printer. Possible values are: a4, a4wide, letter, legal and 
    746 # executive. If left blank a4wide will be used.
    747 
    748 PAPER_TYPE             = a4wide
    749 
    750 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX 
    751 # packages that should be included in the LaTeX output.
    752 
    753 EXTRA_PACKAGES         = 
    754 
    755 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for 
    756 # the generated latex document. The header should contain everything until 
    757 # the first chapter. If it is left blank doxygen will generate a 
    758 # standard header. Notice: only use this tag if you know what you are doing!
    759 
    760 LATEX_HEADER           = 
    761 
    762 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated 
    763 # is prepared for conversion to pdf (using ps2pdf). The pdf file will 
    764 # contain links (just like the HTML output) instead of page references 
    765 # This makes the output suitable for online browsing using a pdf viewer.
    766 
    767 PDF_HYPERLINKS         = NO
    768 
    769 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of 
    770 # plain latex in the generated Makefile. Set this option to YES to get a 
    771 # higher quality PDF documentation.
    772 
    773 USE_PDFLATEX           = NO
    774 
    775 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. 
    776 # command to the generated LaTeX files. This will instruct LaTeX to keep 
    777 # running if errors occur, instead of asking the user for help. 
    778 # This option is also used when generating formulas in HTML.
    779 
    780 LATEX_BATCHMODE        = NO
    781 
    782 # If LATEX_HIDE_INDICES is set to YES then doxygen will not 
    783 # include the index chapters (such as File Index, Compound Index, etc.) 
    784 # in the output.
    785 
    786 LATEX_HIDE_INDICES     = NO
    787 
    788 #---------------------------------------------------------------------------
    789 # configuration options related to the RTF output
    790 #---------------------------------------------------------------------------
    791 
    792 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output 
    793 # The RTF output is optimized for Word 97 and may not look very pretty with 
    794 # other RTF readers or editors.
    795 
    796 GENERATE_RTF           = NO
    797 
    798 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put. 
    799 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
    800 # put in front of it. If left blank `rtf' will be used as the default path.
    801 
    802 RTF_OUTPUT             = rtf
    803 
    804 # If the COMPACT_RTF tag is set to YES Doxygen generates more compact 
    805 # RTF documents. This may be useful for small projects and may help to 
    806 # save some trees in general.
    807 
    808 COMPACT_RTF            = NO
    809 
    810 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated 
    811 # will contain hyperlink fields. The RTF file will 
    812 # contain links (just like the HTML output) instead of page references. 
    813 # This makes the output suitable for online browsing using WORD or other 
    814 # programs which support those fields. 
    815 # Note: wordpad (write) and others do not support links.
    816 
    817 RTF_HYPERLINKS         = NO
    818 
    819 # Load stylesheet definitions from file. Syntax is similar to doxygen's 
    820 # config file, i.e. a series of assignments. You only have to provide 
    821 # replacements, missing definitions are set to their default value.
    822 
    823 RTF_STYLESHEET_FILE    = 
    824 
    825 # Set optional variables used in the generation of an rtf document. 
    826 # Syntax is similar to doxygen's config file.
    827 
    828 RTF_EXTENSIONS_FILE    = 
    829 
    830 #---------------------------------------------------------------------------
    831 # configuration options related to the man page output
    832 #---------------------------------------------------------------------------
    833 
    834 # If the GENERATE_MAN tag is set to YES (the default) Doxygen will 
    835 # generate man pages
    836 
    837 GENERATE_MAN           = NO
    838 
    839 # The MAN_OUTPUT tag is used to specify where the man pages will be put. 
    840 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
    841 # put in front of it. If left blank `man' will be used as the default path.
    842 
    843 MAN_OUTPUT             = man
    844 
    845 # The MAN_EXTENSION tag determines the extension that is added to 
    846 # the generated man pages (default is the subroutine's section .3)
    847 
    848 MAN_EXTENSION          = .3
    849 
    850 # If the MAN_LINKS tag is set to YES and Doxygen generates man output, 
    851 # then it will generate one additional man file for each entity 
    852 # documented in the real man page(s). These additional files 
    853 # only source the real man page, but without them the man command 
    854 # would be unable to find the correct page. The default is NO.
    855 
    856 MAN_LINKS              = NO
    857 
    858 #---------------------------------------------------------------------------
    859 # configuration options related to the XML output
    860 #---------------------------------------------------------------------------
    861 
    862 # If the GENERATE_XML tag is set to YES Doxygen will 
    863 # generate an XML file that captures the structure of 
    864 # the code including all documentation.
    865 
    866 GENERATE_XML           = NO
    867 
    868 # The XML_OUTPUT tag is used to specify where the XML pages will be put. 
    869 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
    870 # put in front of it. If left blank `xml' will be used as the default path.
    871 
    872 XML_OUTPUT             = xml
    873 
    874 # The XML_SCHEMA tag can be used to specify an XML schema, 
    875 # which can be used by a validating XML parser to check the 
    876 # syntax of the XML files.
    877 
    878 XML_SCHEMA             = 
    879 
    880 # The XML_DTD tag can be used to specify an XML DTD, 
    881 # which can be used by a validating XML parser to check the 
    882 # syntax of the XML files.
    883 
    884 XML_DTD                = 
    885 
    886 # If the XML_PROGRAMLISTING tag is set to YES Doxygen will 
    887 # dump the program listings (including syntax highlighting 
    888 # and cross-referencing information) to the XML output. Note that 
    889 # enabling this will significantly increase the size of the XML output.
    890 
    891 XML_PROGRAMLISTING     = YES
    892 
    893 #---------------------------------------------------------------------------
    894 # configuration options for the AutoGen Definitions output
    895 #---------------------------------------------------------------------------
    896 
    897 # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will 
    898 # generate an AutoGen Definitions (see autogen.sf.net) file 
    899 # that captures the structure of the code including all 
    900 # documentation. Note that this feature is still experimental 
    901 # and incomplete at the moment.
    902 
    903 GENERATE_AUTOGEN_DEF   = NO
    904 
    905 #---------------------------------------------------------------------------
    906 # configuration options related to the Perl module output
    907 #---------------------------------------------------------------------------
    908 
    909 # If the GENERATE_PERLMOD tag is set to YES Doxygen will 
    910 # generate a Perl module file that captures the structure of 
    911 # the code including all documentation. Note that this 
    912 # feature is still experimental and incomplete at the 
    913 # moment.
    914 
    915 GENERATE_PERLMOD       = NO
    916 
    917 # If the PERLMOD_LATEX tag is set to YES Doxygen will generate 
    918 # the necessary Makefile rules, Perl scripts and LaTeX code to be able 
    919 # to generate PDF and DVI output from the Perl module output.
    920 
    921 PERLMOD_LATEX          = NO
    922 
    923 # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be 
    924 # nicely formatted so it can be parsed by a human reader.  This is useful 
    925 # if you want to understand what is going on.  On the other hand, if this 
    926 # tag is set to NO the size of the Perl module output will be much smaller 
    927 # and Perl will parse it just the same.
    928 
    929 PERLMOD_PRETTY         = YES
    930 
    931 # The names of the make variables in the generated doxyrules.make file 
    932 # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. 
    933 # This is useful so different doxyrules.make files included by the same 
    934 # Makefile don't overwrite each other's variables.
    935 
    936 PERLMOD_MAKEVAR_PREFIX = 
    937 
    938 #---------------------------------------------------------------------------
    939 # Configuration options related to the preprocessor   
    940 #---------------------------------------------------------------------------
    941 
    942 # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will 
    943 # evaluate all C-preprocessor directives found in the sources and include 
    944 # files.
    945 
    946 ENABLE_PREPROCESSING   = YES
    947 
    948 # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro 
    949 # names in the source code. If set to NO (the default) only conditional 
    950 # compilation will be performed. Macro expansion can be done in a controlled 
    951 # way by setting EXPAND_ONLY_PREDEF to YES.
    952 
    953 MACRO_EXPANSION        = NO
    954 
    955 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES 
    956 # then the macro expansion is limited to the macros specified with the 
    957 # PREDEFINED and EXPAND_AS_PREDEFINED tags.
    958 
    959 EXPAND_ONLY_PREDEF     = NO
    960 
    961 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files 
    962 # in the INCLUDE_PATH (see below) will be search if a #include is found.
    963 
    964 SEARCH_INCLUDES        = YES
    965 
    966 # The INCLUDE_PATH tag can be used to specify one or more directories that 
    967 # contain include files that are not input files but should be processed by 
    968 # the preprocessor.
    969 
    970 INCLUDE_PATH           = 
    971 
    972 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard 
    973 # patterns (like *.h and *.hpp) to filter out the header-files in the 
    974 # directories. If left blank, the patterns specified with FILE_PATTERNS will 
    975 # be used.
    976 
    977 INCLUDE_FILE_PATTERNS  = 
    978 
    979 # The PREDEFINED tag can be used to specify one or more macro names that 
    980 # are defined before the preprocessor is started (similar to the -D option of 
    981 # gcc). The argument of the tag is a list of macros of the form: name 
    982 # or name=definition (no spaces). If the definition and the = are 
    983 # omitted =1 is assumed. To prevent a macro definition from being 
    984 # undefined via #undef or recursively expanded use the := operator 
    985 # instead of the = operator.
    986 
    987 PREDEFINED             = 
    988 
    989 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then 
    990 # this tag can be used to specify a list of macro names that should be expanded. 
    991 # The macro definition that is found in the sources will be used. 
    992 # Use the PREDEFINED tag if you want to use a different macro definition.
    993 
    994 EXPAND_AS_DEFINED      = 
    995 
    996 # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then 
    997 # doxygen's preprocessor will remove all function-like macros that are alone 
    998 # on a line, have an all uppercase name, and do not end with a semicolon. Such 
    999 # function macros are typically used for boiler-plate code, and will confuse 
   1000 # the parser if not removed.
   1001 
   1002 SKIP_FUNCTION_MACROS   = YES
   1003 
   1004 #---------------------------------------------------------------------------
   1005 # Configuration::additions related to external references   
   1006 #---------------------------------------------------------------------------
   1007 
   1008 # The TAGFILES option can be used to specify one or more tagfiles. 
   1009 # Optionally an initial location of the external documentation 
   1010 # can be added for each tagfile. The format of a tag file without 
   1011 # this location is as follows: 
   1012 #   TAGFILES = file1 file2 ... 
   1013 # Adding location for the tag files is done as follows: 
   1014 #   TAGFILES = file1=loc1 "file2 = loc2" ... 
   1015 # where "loc1" and "loc2" can be relative or absolute paths or 
   1016 # URLs. If a location is present for each tag, the installdox tool 
   1017 # does not have to be run to correct the links.
   1018 # Note that each tag file must have a unique name
   1019 # (where the name does NOT include the path)
   1020 # If a tag file is not located in the directory in which doxygen 
   1021 # is run, you must also specify the path to the tagfile here.
   1022 
   1023 TAGFILES               = 
   1024 
   1025 # When a file name is specified after GENERATE_TAGFILE, doxygen will create 
   1026 # a tag file that is based on the input files it reads.
   1027 
   1028 GENERATE_TAGFILE       = 
   1029 
   1030 # If the ALLEXTERNALS tag is set to YES all external classes will be listed 
   1031 # in the class index. If set to NO only the inherited external classes 
   1032 # will be listed.
   1033 
   1034 ALLEXTERNALS           = NO
   1035 
   1036 # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed 
   1037 # in the modules index. If set to NO, only the current project's groups will 
   1038 # be listed.
   1039 
   1040 EXTERNAL_GROUPS        = YES
   1041 
   1042 # The PERL_PATH should be the absolute path and name of the perl script 
   1043 # interpreter (i.e. the result of `which perl').
   1044 
   1045 PERL_PATH              = /usr/bin/perl
   1046 
   1047 #---------------------------------------------------------------------------
   1048 # Configuration options related to the dot tool   
   1049 #---------------------------------------------------------------------------
   1050 
   1051 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will 
   1052 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base 
   1053 # or super classes. Setting the tag to NO turns the diagrams off. Note that 
   1054 # this option is superseded by the HAVE_DOT option below. This is only a 
   1055 # fallback. It is recommended to install and use dot, since it yields more 
   1056 # powerful graphs.
   1057 
   1058 CLASS_DIAGRAMS         = YES
   1059 
   1060 # If set to YES, the inheritance and collaboration graphs will hide 
   1061 # inheritance and usage relations if the target is undocumented 
   1062 # or is not a class.
   1063 
   1064 HIDE_UNDOC_RELATIONS   = YES
   1065 
   1066 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is 
   1067 # available from the path. This tool is part of Graphviz, a graph visualization 
   1068 # toolkit from AT&T and Lucent Bell Labs. The other options in this section 
   1069 # have no effect if this option is set to NO (the default)
   1070 
   1071 HAVE_DOT               = @HAVE_DOT@
   1072 
   1073 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen 
   1074 # will generate a graph for each documented class showing the direct and 
   1075 # indirect inheritance relations. Setting this tag to YES will force the 
   1076 # the CLASS_DIAGRAMS tag to NO.
   1077 
   1078 CLASS_GRAPH            = YES
   1079 
   1080 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen 
   1081 # will generate a graph for each documented class showing the direct and 
   1082 # indirect implementation dependencies (inheritance, containment, and 
   1083 # class references variables) of the class with other documented classes.
   1084 
   1085 COLLABORATION_GRAPH    = YES
   1086 
   1087 # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen 
   1088 # will generate a graph for groups, showing the direct groups dependencies
   1089 
   1090 GROUP_GRAPHS           = YES
   1091 
   1092 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and 
   1093 # collaboration diagrams in a style similar to the OMG's Unified Modeling 
   1094 # Language.
   1095 
   1096 UML_LOOK               = NO
   1097 
   1098 # If set to YES, the inheritance and collaboration graphs will show the 
   1099 # relations between templates and their instances.
   1100 
   1101 TEMPLATE_RELATIONS     = NO
   1102 
   1103 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT 
   1104 # tags are set to YES then doxygen will generate a graph for each documented 
   1105 # file showing the direct and indirect include dependencies of the file with 
   1106 # other documented files.
   1107 
   1108 INCLUDE_GRAPH          = YES
   1109 
   1110 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and 
   1111 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each 
   1112 # documented header file showing the documented files that directly or 
   1113 # indirectly include this file.
   1114 
   1115 INCLUDED_BY_GRAPH      = YES
   1116 
   1117 # If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will 
   1118 # generate a call dependency graph for every global function or class method. 
   1119 # Note that enabling this option will significantly increase the time of a run. 
   1120 # So in most cases it will be better to enable call graphs for selected 
   1121 # functions only using the \callgraph command.
   1122 
   1123 CALL_GRAPH             = YES
   1124 
   1125 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen 
   1126 # will graphical hierarchy of all classes instead of a textual one.
   1127 
   1128 GRAPHICAL_HIERARCHY    = YES
   1129 
   1130 # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES 
   1131 # then doxygen will show the dependencies a directory has on other directories 
   1132 # in a graphical way. The dependency relations are determined by the #include
   1133 # relations between the files in the directories.
   1134 
   1135 DIRECTORY_GRAPH        = YES
   1136 
   1137 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images 
   1138 # generated by dot. Possible values are png, jpg, or gif
   1139 # If left blank png will be used.
   1140 
   1141 DOT_IMAGE_FORMAT       = png
   1142 
   1143 # The tag DOT_PATH can be used to specify the path where the dot tool can be 
   1144 # found. If left blank, it is assumed the dot tool can be found in the path.
   1145 
   1146 DOT_PATH               = 
   1147 
   1148 # The DOTFILE_DIRS tag can be used to specify one or more directories that 
   1149 # contain dot files that are included in the documentation (see the 
   1150 # \dotfile command).
   1151 
   1152 DOTFILE_DIRS           = 
   1153 
   1154 # The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width 
   1155 # (in pixels) of the graphs generated by dot. If a graph becomes larger than 
   1156 # this value, doxygen will try to truncate the graph, so that it fits within 
   1157 # the specified constraint. Beware that most browsers cannot cope with very 
   1158 # large images.
   1159 
   1160 MAX_DOT_GRAPH_WIDTH    = 1024
   1161 
   1162 # The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height 
   1163 # (in pixels) of the graphs generated by dot. If a graph becomes larger than 
   1164 # this value, doxygen will try to truncate the graph, so that it fits within 
   1165 # the specified constraint. Beware that most browsers cannot cope with very 
   1166 # large images.
   1167 
   1168 MAX_DOT_GRAPH_HEIGHT   = 1024
   1169 
   1170 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the 
   1171 # graphs generated by dot. A depth value of 3 means that only nodes reachable 
   1172 # from the root by following a path via at most 3 edges will be shown. Nodes 
   1173 # that lay further from the root node will be omitted. Note that setting this 
   1174 # option to 1 or 2 may greatly reduce the computation time needed for large 
   1175 # code bases. Also note that a graph may be further truncated if the graph's 
   1176 # image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH 
   1177 # and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default), 
   1178 # the graph is not depth-constrained.
   1179 
   1180 MAX_DOT_GRAPH_DEPTH    = 0
   1181 
   1182 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent 
   1183 # background. This is disabled by default, which results in a white background. 
   1184 # Warning: Depending on the platform used, enabling this option may lead to 
   1185 # badly anti-aliased labels on the edges of a graph (i.e. they become hard to 
   1186 # read).
   1187 
   1188 DOT_TRANSPARENT        = NO
   1189 
   1190 # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output 
   1191 # files in one run (i.e. multiple -o and -T options on the command line). This 
   1192 # makes dot run faster, but since only newer versions of dot (>1.8.10) 
   1193 # support this, this feature is disabled by default.
   1194 
   1195 DOT_MULTI_TARGETS      = NO
   1196 
   1197 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will 
   1198 # generate a legend page explaining the meaning of the various boxes and 
   1199 # arrows in the dot generated graphs.
   1200 
   1201 GENERATE_LEGEND        = YES
   1202 
   1203 # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will 
   1204 # remove the intermediate dot files that are used to generate 
   1205 # the various graphs.
   1206 
   1207 DOT_CLEANUP            = YES
   1208 
   1209 #---------------------------------------------------------------------------
   1210 # Configuration::additions related to the search engine   
   1211 #---------------------------------------------------------------------------
   1212 
   1213 # The SEARCHENGINE tag specifies whether or not a search engine should be 
   1214 # used. If set to NO the values of all tags below this one will be ignored.
   1215 
   1216 SEARCHENGINE           = NO
   1217