1 Installation Instructions 2 ************************* 3 4 Copyright (C) 1994-1996, 1999-2002, 2004-2016 Free Software 5 Foundation, Inc. 6 7 Copying and distribution of this file, with or without modification, 8 are permitted in any medium without royalty provided the copyright 9 notice and this notice are preserved. This file is offered as-is, 10 without warranty of any kind. 11 12 Basic Installation 13 ================== 14 15 Briefly, the shell command './configure && make && make install' 16 should configure, build, and install this package. The following 17 more-detailed instructions are generic; see the 'README' file for 18 instructions specific to this package. Some packages provide this 19 'INSTALL' file but do not implement all of the features documented 20 below. The lack of an optional feature in a given package is not 21 necessarily a bug. More recommendations for GNU packages can be found 22 in *note Makefile Conventions: (standards)Makefile Conventions. 23 24 The 'configure' shell script attempts to guess correct values for 25 various system-dependent variables used during compilation. It uses 26 those values to create a 'Makefile' in each directory of the package. 27 It may also create one or more '.h' files containing system-dependent 28 definitions. Finally, it creates a shell script 'config.status' that 29 you can run in the future to recreate the current configuration, and a 30 file 'config.log' containing compiler output (useful mainly for 31 debugging 'configure'). 32 33 It can also use an optional file (typically called 'config.cache' and 34 enabled with '--cache-file=config.cache' or simply '-C') that saves the 35 results of its tests to speed up reconfiguring. Caching is disabled by 36 default to prevent problems with accidental use of stale cache files. 37 38 If you need to do unusual things to compile the package, please try 39 to figure out how 'configure' could check whether to do them, and mail 40 diffs or instructions to the address given in the 'README' so they can 41 be considered for the next release. If you are using the cache, and at 42 some point 'config.cache' contains results you don't want to keep, you 43 may remove or edit it. 44 45 The file 'configure.ac' (or 'configure.in') is used to create 46 'configure' by a program called 'autoconf'. You need 'configure.ac' if 47 you want to change it or regenerate 'configure' using a newer version of 48 'autoconf'. 49 50 The simplest way to compile this package is: 51 52 1. 'cd' to the directory containing the package's source code and type 53 './configure' to configure the package for your system. 54 55 Running 'configure' might take a while. While running, it prints 56 some messages telling which features it is checking for. 57 58 2. Type 'make' to compile the package. 59 60 3. Optionally, type 'make check' to run any self-tests that come with 61 the package, generally using the just-built uninstalled binaries. 62 63 4. Type 'make install' to install the programs and any data files and 64 documentation. When installing into a prefix owned by root, it is 65 recommended that the package be configured and built as a regular 66 user, and only the 'make install' phase executed with root 67 privileges. 68 69 5. Optionally, type 'make installcheck' to repeat any self-tests, but 70 this time using the binaries in their final installed location. 71 This target does not install anything. Running this target as a 72 regular user, particularly if the prior 'make install' required 73 root privileges, verifies that the installation completed 74 correctly. 75 76 6. You can remove the program binaries and object files from the 77 source code directory by typing 'make clean'. To also remove the 78 files that 'configure' created (so you can compile the package for 79 a different kind of computer), type 'make distclean'. There is 80 also a 'make maintainer-clean' target, but that is intended mainly 81 for the package's developers. If you use it, you may have to get 82 all sorts of other programs in order to regenerate files that came 83 with the distribution. 84 85 7. Often, you can also type 'make uninstall' to remove the installed 86 files again. In practice, not all packages have tested that 87 uninstallation works correctly, even though it is required by the 88 GNU Coding Standards. 89 90 8. Some packages, particularly those that use Automake, provide 'make 91 distcheck', which can by used by developers to test that all other 92 targets like 'make install' and 'make uninstall' work correctly. 93 This target is generally not run by end users. 94 95 Compilers and Options 96 ===================== 97 98 Some systems require unusual options for compilation or linking that 99 the 'configure' script does not know about. Run './configure --help' 100 for details on some of the pertinent environment variables. 101 102 You can give 'configure' initial values for configuration parameters 103 by setting variables in the command line or in the environment. Here is 104 an example: 105 106 ./configure CC=c99 CFLAGS=-g LIBS=-lposix 107 108 *Note Defining Variables::, for more details. 109 110 Compiling For Multiple Architectures 111 ==================================== 112 113 You can compile the package for more than one kind of computer at the 114 same time, by placing the object files for each architecture in their 115 own directory. To do this, you can use GNU 'make'. 'cd' to the 116 directory where you want the object files and executables to go and run 117 the 'configure' script. 'configure' automatically checks for the source 118 code in the directory that 'configure' is in and in '..'. This is known 119 as a "VPATH" build. 120 121 With a non-GNU 'make', it is safer to compile the package for one 122 architecture at a time in the source code directory. After you have 123 installed the package for one architecture, use 'make distclean' before 124 reconfiguring for another architecture. 125 126 On MacOS X 10.5 and later systems, you can create libraries and 127 executables that work on multiple system types--known as "fat" or 128 "universal" binaries--by specifying multiple '-arch' options to the 129 compiler but only a single '-arch' option to the preprocessor. Like 130 this: 131 132 ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ 133 CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ 134 CPP="gcc -E" CXXCPP="g++ -E" 135 136 This is not guaranteed to produce working output in all cases, you 137 may have to build one architecture at a time and combine the results 138 using the 'lipo' tool if you have problems. 139 140 Installation Names 141 ================== 142 143 By default, 'make install' installs the package's commands under 144 '/usr/local/bin', include files under '/usr/local/include', etc. You 145 can specify an installation prefix other than '/usr/local' by giving 146 'configure' the option '--prefix=PREFIX', where PREFIX must be an 147 absolute file name. 148 149 You can specify separate installation prefixes for 150 architecture-specific files and architecture-independent files. If you 151 pass the option '--exec-prefix=PREFIX' to 'configure', the package uses 152 PREFIX as the prefix for installing programs and libraries. 153 Documentation and other data files still use the regular prefix. 154 155 In addition, if you use an unusual directory layout you can give 156 options like '--bindir=DIR' to specify different values for particular 157 kinds of files. Run 'configure --help' for a list of the directories 158 you can set and what kinds of files go in them. In general, the default 159 for these options is expressed in terms of '${prefix}', so that 160 specifying just '--prefix' will affect all of the other directory 161 specifications that were not explicitly provided. 162 163 The most portable way to affect installation locations is to pass the 164 correct locations to 'configure'; however, many packages provide one or 165 both of the following shortcuts of passing variable assignments to the 166 'make install' command line to change installation locations without 167 having to reconfigure or recompile. 168 169 The first method involves providing an override variable for each 170 affected directory. For example, 'make install 171 prefix=/alternate/directory' will choose an alternate location for all 172 directory configuration variables that were expressed in terms of 173 '${prefix}'. Any directories that were specified during 'configure', 174 but not in terms of '${prefix}', must each be overridden at install time 175 for the entire installation to be relocated. The approach of makefile 176 variable overrides for each directory variable is required by the GNU 177 Coding Standards, and ideally causes no recompilation. However, some 178 platforms have known limitations with the semantics of shared libraries 179 that end up requiring recompilation when using this method, particularly 180 noticeable in packages that use GNU Libtool. 181 182 The second method involves providing the 'DESTDIR' variable. For 183 example, 'make install DESTDIR=/alternate/directory' will prepend 184 '/alternate/directory' before all installation names. The approach of 185 'DESTDIR' overrides is not required by the GNU Coding Standards, and 186 does not work on platforms that have drive letters. On the other hand, 187 it does better at avoiding recompilation issues, and works well even 188 when some directory options were not specified in terms of '${prefix}' 189 at 'configure' time. 190 191 Optional Features 192 ================= 193 194 If the package supports it, you can cause programs to be installed 195 with an extra prefix or suffix on their names by giving 'configure' the 196 option '--program-prefix=PREFIX' or '--program-suffix=SUFFIX'. 197 198 Some packages pay attention to '--enable-FEATURE' options to 199 'configure', where FEATURE indicates an optional part of the package. 200 They may also pay attention to '--with-PACKAGE' options, where PACKAGE 201 is something like 'gnu-as' or 'x' (for the X Window System). The 202 'README' should mention any '--enable-' and '--with-' options that the 203 package recognizes. 204 205 For packages that use the X Window System, 'configure' can usually 206 find the X include and library files automatically, but if it doesn't, 207 you can use the 'configure' options '--x-includes=DIR' and 208 '--x-libraries=DIR' to specify their locations. 209 210 Some packages offer the ability to configure how verbose the 211 execution of 'make' will be. For these packages, running './configure 212 --enable-silent-rules' sets the default to minimal output, which can be 213 overridden with 'make V=1'; while running './configure 214 --disable-silent-rules' sets the default to verbose, which can be 215 overridden with 'make V=0'. 216 217 Particular systems 218 ================== 219 220 On HP-UX, the default C compiler is not ANSI C compatible. If GNU CC 221 is not installed, it is recommended to use the following options in 222 order to use an ANSI C compiler: 223 224 ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" 225 226 and if that doesn't work, install pre-built binaries of GCC for HP-UX. 227 228 HP-UX 'make' updates targets which have the same time stamps as their 229 prerequisites, which makes it generally unusable when shipped generated 230 files such as 'configure' are involved. Use GNU 'make' instead. 231 232 On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot 233 parse its '<wchar.h>' header file. The option '-nodtk' can be used as a 234 workaround. If GNU CC is not installed, it is therefore recommended to 235 try 236 237 ./configure CC="cc" 238 239 and if that doesn't work, try 240 241 ./configure CC="cc -nodtk" 242 243 On Solaris, don't put '/usr/ucb' early in your 'PATH'. This 244 directory contains several dysfunctional programs; working variants of 245 these programs are available in '/usr/bin'. So, if you need '/usr/ucb' 246 in your 'PATH', put it _after_ '/usr/bin'. 247 248 On Haiku, software installed for all users goes in '/boot/common', 249 not '/usr/local'. It is recommended to use the following options: 250 251 ./configure --prefix=/boot/common 252 253 Specifying the System Type 254 ========================== 255 256 There may be some features 'configure' cannot figure out 257 automatically, but needs to determine by the type of machine the package 258 will run on. Usually, assuming the package is built to be run on the 259 _same_ architectures, 'configure' can figure that out, but if it prints 260 a message saying it cannot guess the machine type, give it the 261 '--build=TYPE' option. TYPE can either be a short name for the system 262 type, such as 'sun4', or a canonical name which has the form: 263 264 CPU-COMPANY-SYSTEM 265 266 where SYSTEM can have one of these forms: 267 268 OS 269 KERNEL-OS 270 271 See the file 'config.sub' for the possible values of each field. If 272 'config.sub' isn't included in this package, then this package doesn't 273 need to know the machine type. 274 275 If you are _building_ compiler tools for cross-compiling, you should 276 use the option '--target=TYPE' to select the type of system they will 277 produce code for. 278 279 If you want to _use_ a cross compiler, that generates code for a 280 platform different from the build platform, you should specify the 281 "host" platform (i.e., that on which the generated programs will 282 eventually be run) with '--host=TYPE'. 283 284 Sharing Defaults 285 ================ 286 287 If you want to set default values for 'configure' scripts to share, 288 you can create a site shell script called 'config.site' that gives 289 default values for variables like 'CC', 'cache_file', and 'prefix'. 290 'configure' looks for 'PREFIX/share/config.site' if it exists, then 291 'PREFIX/etc/config.site' if it exists. Or, you can set the 292 'CONFIG_SITE' environment variable to the location of the site script. 293 A warning: not all 'configure' scripts look for a site script. 294 295 Defining Variables 296 ================== 297 298 Variables not defined in a site shell script can be set in the 299 environment passed to 'configure'. However, some packages may run 300 configure again during the build, and the customized values of these 301 variables may be lost. In order to avoid this problem, you should set 302 them in the 'configure' command line, using 'VAR=value'. For example: 303 304 ./configure CC=/usr/local2/bin/gcc 305 306 causes the specified 'gcc' to be used as the C compiler (unless it is 307 overridden in the site shell script). 308 309 Unfortunately, this technique does not work for 'CONFIG_SHELL' due to an 310 Autoconf limitation. Until the limitation is lifted, you can use this 311 workaround: 312 313 CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash 314 315 'configure' Invocation 316 ====================== 317 318 'configure' recognizes the following options to control how it 319 operates. 320 321 '--help' 322 '-h' 323 Print a summary of all of the options to 'configure', and exit. 324 325 '--help=short' 326 '--help=recursive' 327 Print a summary of the options unique to this package's 328 'configure', and exit. The 'short' variant lists options used only 329 in the top level, while the 'recursive' variant lists options also 330 present in any nested packages. 331 332 '--version' 333 '-V' 334 Print the version of Autoconf used to generate the 'configure' 335 script, and exit. 336 337 '--cache-file=FILE' 338 Enable the cache: use and save the results of the tests in FILE, 339 traditionally 'config.cache'. FILE defaults to '/dev/null' to 340 disable caching. 341 342 '--config-cache' 343 '-C' 344 Alias for '--cache-file=config.cache'. 345 346 '--quiet' 347 '--silent' 348 '-q' 349 Do not print messages saying which checks are being made. To 350 suppress all normal output, redirect it to '/dev/null' (any error 351 messages will still be shown). 352 353 '--srcdir=DIR' 354 Look for the package's source code in directory DIR. Usually 355 'configure' can determine that directory automatically. 356 357 '--prefix=DIR' 358 Use DIR as the installation prefix. *note Installation Names:: for 359 more details, including other options available for fine-tuning the 360 installation locations. 361 362 '--no-create' 363 '-n' 364 Run the configure checks, but stop before creating any output 365 files. 366 367 'configure' also accepts some other, not widely useful, options. Run 368 'configure --help' for more details. 369
