1 ; RUN: llc -mtriple=thumb-eabi < %s -o - | FileCheck %s 2 3 ; Check that stack addresses are generated using a single ADD 4 define void @test1(i8** %p) { 5 %x = alloca i8, align 1 6 %y = alloca i8, align 1 7 %z = alloca i8, align 1 8 ; CHECK: add r1, sp, #8 9 ; CHECK: str r1, [r0] 10 store volatile i8* %x, i8** %p, align 4 11 ; CHECK: add r1, sp, #4 12 ; CHECK: str r1, [r0] 13 store volatile i8* %y, i8** %p, align 4 14 ; CHECK: mov r1, sp 15 ; CHECK: str r1, [r0] 16 store volatile i8* %z, i8** %p, align 4 17 ret void 18 } 19 20 ; Stack offsets larger than 1020 still need two ADDs 21 define void @test2([1024 x i8]** %p) { 22 %arr1 = alloca [1024 x i8], align 1 23 %arr2 = alloca [1024 x i8], align 1 24 ; CHECK: add r1, sp, #1020 25 ; CHECK: adds r1, #4 26 ; CHECK: str r1, [r0] 27 store volatile [1024 x i8]* %arr1, [1024 x i8]** %p, align 4 28 ; CHECK: mov r1, sp 29 ; CHECK: str r1, [r0] 30 store volatile [1024 x i8]* %arr2, [1024 x i8]** %p, align 4 31 ret void 32 } 33 34 ; If possible stack-based lrdb/ldrh are widened to use SP-based addressing 35 define i32 @test3() #0 { 36 %x = alloca i8, align 1 37 %y = alloca i8, align 1 38 ; CHECK: ldr r0, [sp] 39 %1 = load i8, i8* %x, align 1 40 ; CHECK: ldr r1, [sp, #4] 41 %2 = load i8, i8* %y, align 1 42 %3 = add nsw i8 %1, %2 43 %4 = zext i8 %3 to i32 44 ret i32 %4 45 } 46 47 define i32 @test4() #0 { 48 %x = alloca i16, align 2 49 %y = alloca i16, align 2 50 ; CHECK: ldr r0, [sp] 51 %1 = load i16, i16* %x, align 2 52 ; CHECK: ldr r1, [sp, #4] 53 %2 = load i16, i16* %y, align 2 54 %3 = add nsw i16 %1, %2 55 %4 = zext i16 %3 to i32 56 ret i32 %4 57 } 58 59 ; Don't widen if the value needs to be zero-extended 60 define zeroext i8 @test5() { 61 %x = alloca i8, align 1 62 ; CHECK: mov r0, sp 63 ; CHECK: ldrb r0, [r0] 64 %1 = load i8, i8* %x, align 1 65 ret i8 %1 66 } 67 68 define zeroext i16 @test6() { 69 %x = alloca i16, align 2 70 ; CHECK: mov r0, sp 71 ; CHECK: ldrh r0, [r0] 72 %1 = load i16, i16* %x, align 2 73 ret i16 %1 74 } 75 76 ; Accessing the bottom of a large array shouldn't require materializing a base 77 ; 78 ; CHECK: movs [[REG:r[0-9]+]], #1 79 ; CHECK: str [[REG]], [sp, #16] 80 ; CHECK: str [[REG]], [sp, #4] 81 82 define void @test7() { 83 %arr = alloca [200 x i32], align 4 84 85 %arrayidx = getelementptr inbounds [200 x i32], [200 x i32]* %arr, i32 0, i32 1 86 store i32 1, i32* %arrayidx, align 4 87 88 %arrayidx1 = getelementptr inbounds [200 x i32], [200 x i32]* %arr, i32 0, i32 4 89 store i32 1, i32* %arrayidx1, align 4 90 91 ret void 92 } 93 94 ; Check that loads/stores with out-of-range offsets are handled correctly 95 define void @test8() { 96 %arr3 = alloca [224 x i32], align 4 97 %arr2 = alloca [224 x i32], align 4 98 %arr1 = alloca [224 x i32], align 4 99 100 ; CHECK: movs [[REG:r[0-9]+]], #1 101 ; CHECK-DAG: str [[REG]], [sp] 102 %arr1idx1 = getelementptr inbounds [224 x i32], [224 x i32]* %arr1, i32 0, i32 0 103 store i32 1, i32* %arr1idx1, align 4 104 105 ; Offset in range for sp-based store, but not for non-sp-based store 106 ; CHECK-DAG: str [[REG]], [sp, #128] 107 %arr1idx2 = getelementptr inbounds [224 x i32], [224 x i32]* %arr1, i32 0, i32 32 108 store i32 1, i32* %arr1idx2, align 4 109 110 ; CHECK-DAG: str [[REG]], [sp, #896] 111 %arr2idx1 = getelementptr inbounds [224 x i32], [224 x i32]* %arr2, i32 0, i32 0 112 store i32 1, i32* %arr2idx1, align 4 113 114 ; %arr2 is in range, but this element of it is not 115 ; CHECK-DAG: ldr [[RA:r[0-9]+]], .LCPI7_2 116 ; CHECK-DAG: add [[RA]], sp 117 ; CHECK-DAG: str [[REG]], [{{r[0-9]+}}] 118 %arr2idx2 = getelementptr inbounds [224 x i32], [224 x i32]* %arr2, i32 0, i32 32 119 store i32 1, i32* %arr2idx2, align 4 120 121 ; %arr3 is not in range 122 ; CHECK-DAG: ldr [[RB:r[0-9]+]], .LCPI7_3 123 ; CHECK-DAG: add [[RB]], sp 124 ; CHECK-DAG: str [[REG]], [{{r[0-9]+}}] 125 %arr3idx1 = getelementptr inbounds [224 x i32], [224 x i32]* %arr3, i32 0, i32 0 126 store i32 1, i32* %arr3idx1, align 4 127 128 ; CHECK-DAG: ldr [[RC:r[0-9]+]], .LCPI7_4 129 ; CHECK-DAG: add [[RC]], sp 130 ; CHECK-DAG: str [[REG]], [{{r[0-9]+}}] 131 %arr3idx2 = getelementptr inbounds [224 x i32], [224 x i32]* %arr3, i32 0, i32 32 132 store i32 1, i32* %arr3idx2, align 4 133 134 ret void 135 } 136
