1 /* 2 * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board 3 * 4 * Copyright (C) 2012 Atmel, 5 * 2012 Nicolas Ferre <nicolas.ferre (at) atmel.com> 6 * 7 * Licensed under GPLv2 or later. 8 */ 9 /dts-v1/; 10 #include "at91sam9g25.dtsi" 11 #include "at91sam9x5ek.dtsi" 12 13 / { 14 model = "Atmel AT91SAM9G25-EK"; 15 compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; 16 17 ahb { 18 apb { 19 spi0: spi@f0000000 { 20 status = "disabled"; 21 }; 22 23 mmc1: mmc@f000c000 { 24 status = "disabled"; 25 }; 26 27 i2c0: i2c@f8010000 { 28 ov2640: camera@0x30 { 29 compatible = "ovti,ov2640"; 30 reg = <0x30>; 31 pinctrl-names = "default"; 32 pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; 33 resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>; 34 pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>; 35 clocks = <&pck0>; 36 clock-names = "xvclk"; 37 assigned-clocks = <&pck0>; 38 assigned-clock-rates = <25000000>; 39 status = "okay"; 40 41 port { 42 ov2640_0: endpoint { 43 remote-endpoint = <&isi_0>; 44 bus-width = <8>; 45 }; 46 }; 47 }; 48 }; 49 50 macb0: ethernet@f802c000 { 51 phy-mode = "rmii"; 52 status = "okay"; 53 }; 54 55 isi: isi@f8048000 { 56 status = "okay"; 57 port { 58 isi_0: endpoint@0 { 59 reg = <0>; 60 remote-endpoint = <&ov2640_0>; 61 bus-width = <8>; 62 vsync-active = <1>; 63 hsync-active = <1>; 64 }; 65 }; 66 }; 67 }; 68 }; 69 }; 70
