Home | History | Annotate | Download | only in dts 
      1 // SPDX-License-Identifier: GPL-2.0
      2 /dts-v1/;
      3 
      4 #include "kirkwood.dtsi"
      5 #include "kirkwood-6281.dtsi"
      6 
      7 / {
      8 	model = "Seagate FreeAgent Dockstar";
      9 	compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
     10 
     11 	memory {
     12 		device_type = "memory";
     13 		reg = <0x00000000 0x8000000>;
     14 	};
     15 
     16 	chosen {
     17 		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
     18 		stdout-path = &uart0;
     19 	};
     20 
     21 	ocp@f1000000 {
     22 		pinctrl: pin-controller@10000 {
     23 			pmx_usb_power_enable: pmx-usb-power-enable {
     24 				marvell,pins = "mpp29";
     25 				marvell,function = "gpio";
     26 			};
     27 			pmx_led_green: pmx-led-green {
     28 				marvell,pins = "mpp46";
     29 				marvell,function = "gpio";
     30 			};
     31 			pmx_led_orange: pmx-led-orange {
     32 				marvell,pins = "mpp47";
     33 				marvell,function = "gpio";
     34 			};
     35 		};
     36 		serial@12000 {
     37 			status = "ok";
     38 		};
     39 	};
     40 	gpio-leds {
     41 		compatible = "gpio-leds";
     42 		pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
     43 		pinctrl-names = "default";
     44 
     45 		health {
     46 			label = "status:green:health";
     47 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
     48 			default-state = "keep";
     49 		};
     50 		fault {
     51 			label = "status:orange:fault";
     52 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
     53 		};
     54 	};
     55 	regulators {
     56 		compatible = "simple-bus";
     57 		#address-cells = <1>;
     58 		#size-cells = <0>;
     59 		pinctrl-0 = <&pmx_usb_power_enable>;
     60 		pinctrl-names = "default";
     61 
     62 		usb_power: regulator@1 {
     63 			compatible = "regulator-fixed";
     64 			reg = <1>;
     65 			regulator-name = "USB Power";
     66 			regulator-min-microvolt = <5000000>;
     67 			regulator-max-microvolt = <5000000>;
     68 			enable-active-high;
     69 			regulator-always-on;
     70 			regulator-boot-on;
     71 			gpio = <&gpio0 29 0>;
     72 		};
     73 	};
     74 };
     75 
     76 &nand {
     77 	status = "okay";
     78 
     79 	partition@0 {
     80 		label = "u-boot";
     81 		reg = <0x0000000 0x100000>;
     82 		read-only;
     83 	};
     84 
     85 	partition@100000 {
     86 		label = "uImage";
     87 		reg = <0x0100000 0x400000>;
     88 	};
     89 
     90 	partition@500000 {
     91 		label = "data";
     92 		reg = <0x0500000 0xfb00000>;
     93 	};
     94 };
     95 
     96 &mdio {
     97 	status = "okay";
     98 
     99 	ethphy0: ethernet-phy@0 {
    100 		compatible = "marvell,88e1116";
    101 		reg = <0>;
    102 	};
    103 };
    104 
    105 &eth0 {
    106 	status = "okay";
    107 	ethernet0-port@0 {
    108 		phy-handle = <&ethphy0>;
    109 	};
    110 };
    111