1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Device Tree Source for the Lager board 4 * 5 * Copyright (C) 2013-2014 Renesas Solutions Corp. 6 * Copyright (C) 2014 Cogent Embedded, Inc. 7 * Copyright (C) 2015-2016 Renesas Electronics Corporation 8 */ 9 10 /* 11 * SSI-AK4643 12 * 13 * SW1: 1: AK4643 14 * 2: CN22 15 * 3: ADV7511 16 * 17 * This command is required when Playback/Capture 18 * 19 * amixer set "LINEOUT Mixer DACL" on 20 * amixer set "DVC Out" 100% 21 * amixer set "DVC In" 100% 22 * 23 * You can use Mute 24 * 25 * amixer set "DVC Out Mute" on 26 * amixer set "DVC In Mute" on 27 * 28 * You can use Volume Ramp 29 * 30 * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" 31 * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" 32 * amixer set "DVC Out Ramp" on 33 * aplay xxx.wav & 34 * amixer set "DVC Out" 80% // Volume Down 35 * amixer set "DVC Out" 100% // Volume Up 36 */ 37 38 /dts-v1/; 39 #include "r8a7790.dtsi" 40 #include <dt-bindings/gpio/gpio.h> 41 #include <dt-bindings/input/input.h> 42 43 / { 44 model = "Lager"; 45 compatible = "renesas,lager", "renesas,r8a7790"; 46 47 aliases { 48 serial0 = &scif0; 49 serial1 = &scifa1; 50 i2c8 = &gpioi2c1; 51 i2c9 = &gpioi2c2; 52 i2c10 = &i2cexio0; 53 i2c11 = &i2cexio1; 54 i2c12 = &i2chdmi; 55 i2c13 = &i2cpwr; 56 }; 57 58 chosen { 59 bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; 60 stdout-path = "serial0:115200n8"; 61 }; 62 63 memory@40000000 { 64 device_type = "memory"; 65 reg = <0 0x40000000 0 0x40000000>; 66 }; 67 68 memory@140000000 { 69 device_type = "memory"; 70 reg = <1 0x40000000 0 0xc0000000>; 71 }; 72 73 lbsc { 74 #address-cells = <1>; 75 #size-cells = <1>; 76 }; 77 78 keyboard { 79 compatible = "gpio-keys"; 80 81 one { 82 linux,code = <KEY_1>; 83 label = "SW2-1"; 84 wakeup-source; 85 debounce-interval = <20>; 86 gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; 87 }; 88 two { 89 linux,code = <KEY_2>; 90 label = "SW2-2"; 91 wakeup-source; 92 debounce-interval = <20>; 93 gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; 94 }; 95 three { 96 linux,code = <KEY_3>; 97 label = "SW2-3"; 98 wakeup-source; 99 debounce-interval = <20>; 100 gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; 101 }; 102 four { 103 linux,code = <KEY_4>; 104 label = "SW2-4"; 105 wakeup-source; 106 debounce-interval = <20>; 107 gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; 108 }; 109 }; 110 111 leds { 112 compatible = "gpio-leds"; 113 led6 { 114 gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; 115 }; 116 led7 { 117 gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>; 118 }; 119 led8 { 120 gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; 121 }; 122 }; 123 124 fixedregulator3v3: regulator-3v3 { 125 compatible = "regulator-fixed"; 126 regulator-name = "fixed-3.3V"; 127 regulator-min-microvolt = <3300000>; 128 regulator-max-microvolt = <3300000>; 129 regulator-boot-on; 130 regulator-always-on; 131 }; 132 133 vcc_sdhi0: regulator-vcc-sdhi0 { 134 compatible = "regulator-fixed"; 135 136 regulator-name = "SDHI0 Vcc"; 137 regulator-min-microvolt = <3300000>; 138 regulator-max-microvolt = <3300000>; 139 140 gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>; 141 enable-active-high; 142 }; 143 144 vccq_sdhi0: regulator-vccq-sdhi0 { 145 compatible = "regulator-gpio"; 146 147 regulator-name = "SDHI0 VccQ"; 148 regulator-min-microvolt = <1800000>; 149 regulator-max-microvolt = <3300000>; 150 151 gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; 152 gpios-states = <1>; 153 states = <3300000 1 154 1800000 0>; 155 }; 156 157 vcc_sdhi2: regulator-vcc-sdhi2 { 158 compatible = "regulator-fixed"; 159 160 regulator-name = "SDHI2 Vcc"; 161 regulator-min-microvolt = <3300000>; 162 regulator-max-microvolt = <3300000>; 163 164 gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>; 165 enable-active-high; 166 }; 167 168 vccq_sdhi2: regulator-vccq-sdhi2 { 169 compatible = "regulator-gpio"; 170 171 regulator-name = "SDHI2 VccQ"; 172 regulator-min-microvolt = <1800000>; 173 regulator-max-microvolt = <3300000>; 174 175 gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; 176 gpios-states = <1>; 177 states = <3300000 1 178 1800000 0>; 179 }; 180 181 audio_clock: audio_clock { 182 compatible = "fixed-clock"; 183 #clock-cells = <0>; 184 clock-frequency = <11289600>; 185 }; 186 187 rsnd_ak4643: sound { 188 compatible = "simple-audio-card"; 189 190 simple-audio-card,format = "left_j"; 191 simple-audio-card,bitclock-master = <&sndcodec>; 192 simple-audio-card,frame-master = <&sndcodec>; 193 194 sndcpu: simple-audio-card,cpu { 195 sound-dai = <&rcar_sound>; 196 }; 197 198 sndcodec: simple-audio-card,codec { 199 sound-dai = <&ak4643>; 200 clocks = <&audio_clock>; 201 }; 202 }; 203 204 vga-encoder { 205 compatible = "adi,adv7123"; 206 207 ports { 208 #address-cells = <1>; 209 #size-cells = <0>; 210 211 port@0 { 212 reg = <0>; 213 adv7123_in: endpoint { 214 remote-endpoint = <&du_out_rgb>; 215 }; 216 }; 217 port@1 { 218 reg = <1>; 219 adv7123_out: endpoint { 220 remote-endpoint = <&vga_in>; 221 }; 222 }; 223 }; 224 }; 225 226 vga { 227 compatible = "vga-connector"; 228 229 port { 230 vga_in: endpoint { 231 remote-endpoint = <&adv7123_out>; 232 }; 233 }; 234 }; 235 236 hdmi-in { 237 compatible = "hdmi-connector"; 238 type = "a"; 239 240 port { 241 hdmi_con_in: endpoint { 242 remote-endpoint = <&adv7612_in>; 243 }; 244 }; 245 }; 246 247 cec_clock: cec-clock { 248 compatible = "fixed-clock"; 249 #clock-cells = <0>; 250 clock-frequency = <12000000>; 251 }; 252 253 hdmi-out { 254 compatible = "hdmi-connector"; 255 type = "a"; 256 257 port { 258 hdmi_con_out: endpoint { 259 remote-endpoint = <&adv7511_out>; 260 }; 261 }; 262 }; 263 264 x2_clk: x2-clock { 265 compatible = "fixed-clock"; 266 #clock-cells = <0>; 267 clock-frequency = <148500000>; 268 }; 269 270 x13_clk: x13-clock { 271 compatible = "fixed-clock"; 272 #clock-cells = <0>; 273 clock-frequency = <148500000>; 274 }; 275 276 gpioi2c1: i2c-8 { 277 #address-cells = <1>; 278 #size-cells = <0>; 279 compatible = "i2c-gpio"; 280 status = "disabled"; 281 scl-gpios = <&gpio1 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 282 sda-gpios = <&gpio1 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 283 i2c-gpio,delay-us = <5>; 284 }; 285 286 gpioi2c2: i2c-9 { 287 #address-cells = <1>; 288 #size-cells = <0>; 289 compatible = "i2c-gpio"; 290 status = "disabled"; 291 scl-gpios = <&gpio5 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 292 sda-gpios = <&gpio5 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 293 i2c-gpio,delay-us = <5>; 294 }; 295 296 /* 297 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only. 298 * We use the I2C demuxer, so the desired IP core can be selected at runtime 299 * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0). 300 * Note: For testing the I2C slave feature, it is convenient to connect this 301 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and 302 * instantiate the slave device at runtime according to the documentation. 303 * You can then communicate with the slave via IIC3. 304 * 305 * IIC0/I2C0 does not appear to support fallback to GPIO. 306 */ 307 i2cexio0: i2c-10 { 308 compatible = "i2c-demux-pinctrl"; 309 i2c-parent = <&iic0>, <&i2c0>; 310 i2c-bus-name = "i2c-exio0"; 311 #address-cells = <1>; 312 #size-cells = <0>; 313 }; 314 315 /* 316 * IIC1/I2C1 is routed to EXIO connector A, pins 78 (SCL) + 80 (SDA). 317 * This is similar to the arangement described for i2cexio0 (above) 318 * with a fallback to GPIO also provided. 319 */ 320 i2cexio1: i2c-11 { 321 compatible = "i2c-demux-pinctrl"; 322 i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>; 323 i2c-bus-name = "i2c-exio1"; 324 #address-cells = <1>; 325 #size-cells = <0>; 326 }; 327 328 /* 329 * IIC2 and I2C2 may be switched using pinmux. 330 * A fallback to GPIO is also provided. 331 */ 332 i2chdmi: i2c-12 { 333 compatible = "i2c-demux-pinctrl"; 334 i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>; 335 i2c-bus-name = "i2c-hdmi"; 336 #address-cells = <1>; 337 #size-cells = <0>; 338 339 ak4643: codec@12 { 340 compatible = "asahi-kasei,ak4643"; 341 #sound-dai-cells = <0>; 342 reg = <0x12>; 343 }; 344 345 composite-in@20 { 346 compatible = "adi,adv7180"; 347 reg = <0x20>; 348 remote = <&vin1>; 349 350 port { 351 adv7180: endpoint { 352 bus-width = <8>; 353 remote-endpoint = <&vin1ep0>; 354 }; 355 }; 356 }; 357 358 hdmi@39 { 359 compatible = "adi,adv7511w"; 360 reg = <0x39>; 361 interrupt-parent = <&gpio1>; 362 interrupts = <15 IRQ_TYPE_LEVEL_LOW>; 363 clocks = <&cec_clock>; 364 clock-names = "cec"; 365 366 adi,input-depth = <8>; 367 adi,input-colorspace = "rgb"; 368 adi,input-clock = "1x"; 369 adi,input-style = <1>; 370 adi,input-justification = "evenly"; 371 372 ports { 373 #address-cells = <1>; 374 #size-cells = <0>; 375 376 port@0 { 377 reg = <0>; 378 adv7511_in: endpoint { 379 remote-endpoint = <&lvds0_out>; 380 }; 381 }; 382 383 port@1 { 384 reg = <1>; 385 adv7511_out: endpoint { 386 remote-endpoint = <&hdmi_con_out>; 387 }; 388 }; 389 }; 390 }; 391 392 hdmi-in@4c { 393 compatible = "adi,adv7612"; 394 reg = <0x4c>; 395 interrupt-parent = <&gpio1>; 396 interrupts = <20 IRQ_TYPE_LEVEL_LOW>; 397 default-input = <0>; 398 399 ports { 400 #address-cells = <1>; 401 #size-cells = <0>; 402 403 port@0 { 404 reg = <0>; 405 adv7612_in: endpoint { 406 remote-endpoint = <&hdmi_con_in>; 407 }; 408 }; 409 410 port@2 { 411 reg = <2>; 412 adv7612_out: endpoint { 413 remote-endpoint = <&vin0ep2>; 414 }; 415 }; 416 }; 417 }; 418 }; 419 420 /* 421 * IIC3 and I2C3 may be switched using pinmux. 422 * IIC3/I2C3 does not appear to support fallback to GPIO. 423 */ 424 i2cpwr: i2c-13 { 425 compatible = "i2c-demux-pinctrl"; 426 i2c-parent = <&iic3>, <&i2c3>; 427 i2c-bus-name = "i2c-pwr"; 428 #address-cells = <1>; 429 #size-cells = <0>; 430 431 pmic@58 { 432 compatible = "dlg,da9063"; 433 reg = <0x58>; 434 interrupt-parent = <&irqc0>; 435 interrupts = <2 IRQ_TYPE_LEVEL_LOW>; 436 interrupt-controller; 437 438 rtc { 439 compatible = "dlg,da9063-rtc"; 440 }; 441 442 wdt { 443 compatible = "dlg,da9063-watchdog"; 444 }; 445 }; 446 447 vdd_dvfs: regulator@68 { 448 compatible = "dlg,da9210"; 449 reg = <0x68>; 450 interrupt-parent = <&irqc0>; 451 interrupts = <2 IRQ_TYPE_LEVEL_LOW>; 452 453 regulator-min-microvolt = <1000000>; 454 regulator-max-microvolt = <1000000>; 455 regulator-boot-on; 456 regulator-always-on; 457 }; 458 }; 459 }; 460 461 &du { 462 pinctrl-0 = <&du_pins>; 463 pinctrl-names = "default"; 464 status = "okay"; 465 466 clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, 467 <&x13_clk>, <&x2_clk>; 468 clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1"; 469 470 ports { 471 port@0 { 472 endpoint { 473 remote-endpoint = <&adv7123_in>; 474 }; 475 }; 476 }; 477 }; 478 479 &lvds0 { 480 status = "okay"; 481 482 ports { 483 port@1 { 484 endpoint { 485 remote-endpoint = <&adv7511_in>; 486 }; 487 }; 488 }; 489 }; 490 491 &lvds1 { 492 status = "okay"; 493 494 ports { 495 port@1 { 496 lvds_connector: endpoint { 497 }; 498 }; 499 }; 500 }; 501 502 &extal_clk { 503 clock-frequency = <20000000>; 504 }; 505 506 &pfc { 507 pinctrl-0 = <&scif_clk_pins>; 508 pinctrl-names = "default"; 509 510 du_pins: du { 511 groups = "du_rgb666", "du_sync_1", "du_clk_out_0"; 512 function = "du"; 513 }; 514 515 scif0_pins: scif0 { 516 groups = "scif0_data"; 517 function = "scif0"; 518 }; 519 520 scif_clk_pins: scif_clk { 521 groups = "scif_clk"; 522 function = "scif_clk"; 523 }; 524 525 ether_pins: ether { 526 groups = "eth_link", "eth_mdio", "eth_rmii"; 527 function = "eth"; 528 }; 529 530 phy1_pins: phy1 { 531 groups = "intc_irq0"; 532 function = "intc"; 533 }; 534 535 scifa1_pins: scifa1 { 536 groups = "scifa1_data"; 537 function = "scifa1"; 538 }; 539 540 sdhi0_pins: sd0 { 541 groups = "sdhi0_data4", "sdhi0_ctrl"; 542 function = "sdhi0"; 543 power-source = <3300>; 544 }; 545 546 sdhi0_pins_uhs: sd0_uhs { 547 groups = "sdhi0_data4", "sdhi0_ctrl"; 548 function = "sdhi0"; 549 power-source = <1800>; 550 }; 551 552 sdhi2_pins: sd2 { 553 groups = "sdhi2_data4", "sdhi2_ctrl"; 554 function = "sdhi2"; 555 power-source = <3300>; 556 }; 557 558 sdhi2_pins_uhs: sd2_uhs { 559 groups = "sdhi2_data4", "sdhi2_ctrl"; 560 function = "sdhi2"; 561 power-source = <1800>; 562 }; 563 564 mmc1_pins: mmc1 { 565 groups = "mmc1_data8", "mmc1_ctrl"; 566 function = "mmc1"; 567 }; 568 569 qspi_pins: qspi { 570 groups = "qspi_ctrl", "qspi_data4"; 571 function = "qspi"; 572 }; 573 574 msiof1_pins: msiof1 { 575 groups = "msiof1_clk", "msiof1_sync", "msiof1_rx", 576 "msiof1_tx"; 577 function = "msiof1"; 578 }; 579 580 i2c0_pins: i2c0 { 581 groups = "i2c0"; 582 function = "i2c0"; 583 }; 584 585 iic0_pins: iic0 { 586 groups = "iic0"; 587 function = "iic0"; 588 }; 589 590 i2c1_pins: i2c1 { 591 groups = "i2c1"; 592 function = "i2c1"; 593 }; 594 595 iic1_pins: iic1 { 596 groups = "iic1"; 597 function = "iic1"; 598 }; 599 600 i2c2_pins: i2c2 { 601 groups = "i2c2"; 602 function = "i2c2"; 603 }; 604 605 iic2_pins: iic2 { 606 groups = "iic2"; 607 function = "iic2"; 608 }; 609 610 i2c3_pins: i2c3 { 611 groups = "i2c3"; 612 function = "i2c3"; 613 }; 614 615 iic3_pins: iic3 { 616 groups = "iic3"; 617 function = "iic3"; 618 }; 619 620 hsusb_pins: hsusb { 621 groups = "usb0_ovc_vbus"; 622 function = "usb0"; 623 }; 624 625 usb0_pins: usb0 { 626 groups = "usb0"; 627 function = "usb0"; 628 }; 629 630 usb1_pins: usb1 { 631 groups = "usb1"; 632 function = "usb1"; 633 }; 634 635 usb2_pins: usb2 { 636 groups = "usb2"; 637 function = "usb2"; 638 }; 639 640 vin0_pins: vin0 { 641 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk"; 642 function = "vin0"; 643 }; 644 645 vin1_pins: vin1 { 646 groups = "vin1_data8", "vin1_clk"; 647 function = "vin1"; 648 }; 649 650 sound_pins: sound { 651 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; 652 function = "ssi"; 653 }; 654 655 sound_clk_pins: sound_clk { 656 groups = "audio_clk_a"; 657 function = "audio_clk"; 658 }; 659 }; 660 661 ðer { 662 pinctrl-0 = <ðer_pins &phy1_pins>; 663 pinctrl-names = "default"; 664 665 phy-handle = <&phy1>; 666 renesas,ether-link-active-low; 667 status = "okay"; 668 669 phy1: ethernet-phy@1 { 670 reg = <1>; 671 interrupt-parent = <&irqc0>; 672 interrupts = <0 IRQ_TYPE_LEVEL_LOW>; 673 micrel,led-mode = <1>; 674 }; 675 }; 676 677 &cmt0 { 678 status = "okay"; 679 }; 680 681 &mmcif1 { 682 pinctrl-0 = <&mmc1_pins>; 683 pinctrl-names = "default"; 684 685 vmmc-supply = <&fixedregulator3v3>; 686 bus-width = <8>; 687 non-removable; 688 status = "okay"; 689 }; 690 691 &sata1 { 692 status = "okay"; 693 }; 694 695 &qspi { 696 pinctrl-0 = <&qspi_pins>; 697 pinctrl-names = "default"; 698 699 status = "okay"; 700 701 flash: flash@0 { 702 compatible = "spansion,s25fl512s", "jedec,spi-nor"; 703 reg = <0>; 704 spi-max-frequency = <30000000>; 705 spi-tx-bus-width = <4>; 706 spi-rx-bus-width = <4>; 707 spi-cpha; 708 spi-cpol; 709 m25p,fast-read; 710 711 partitions { 712 compatible = "fixed-partitions"; 713 #address-cells = <1>; 714 #size-cells = <1>; 715 716 partition@0 { 717 label = "loader"; 718 reg = <0x00000000 0x00040000>; 719 read-only; 720 }; 721 partition@40000 { 722 label = "user"; 723 reg = <0x00040000 0x00400000>; 724 read-only; 725 }; 726 partition@440000 { 727 label = "flash"; 728 reg = <0x00440000 0x03bc0000>; 729 }; 730 }; 731 }; 732 }; 733 734 &scif0 { 735 pinctrl-0 = <&scif0_pins>; 736 pinctrl-names = "default"; 737 738 status = "okay"; 739 }; 740 741 &scifa1 { 742 pinctrl-0 = <&scifa1_pins>; 743 pinctrl-names = "default"; 744 745 status = "okay"; 746 }; 747 748 &scif_clk { 749 clock-frequency = <14745600>; 750 }; 751 752 &msiof1 { 753 pinctrl-0 = <&msiof1_pins>; 754 pinctrl-names = "default"; 755 756 status = "okay"; 757 758 pmic: pmic@0 { 759 compatible = "renesas,r2a11302ft"; 760 reg = <0>; 761 spi-max-frequency = <6000000>; 762 spi-cpol; 763 spi-cpha; 764 }; 765 }; 766 767 &sdhi0 { 768 pinctrl-0 = <&sdhi0_pins>; 769 pinctrl-1 = <&sdhi0_pins_uhs>; 770 pinctrl-names = "default", "state_uhs"; 771 772 vmmc-supply = <&vcc_sdhi0>; 773 vqmmc-supply = <&vccq_sdhi0>; 774 cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; 775 sd-uhs-sdr50; 776 sd-uhs-sdr104; 777 status = "okay"; 778 }; 779 780 &sdhi2 { 781 pinctrl-0 = <&sdhi2_pins>; 782 pinctrl-1 = <&sdhi2_pins_uhs>; 783 pinctrl-names = "default", "state_uhs"; 784 785 vmmc-supply = <&vcc_sdhi2>; 786 vqmmc-supply = <&vccq_sdhi2>; 787 cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; 788 sd-uhs-sdr50; 789 status = "okay"; 790 }; 791 792 &cpu0 { 793 cpu0-supply = <&vdd_dvfs>; 794 }; 795 796 &i2c0 { 797 pinctrl-0 = <&i2c0_pins>; 798 pinctrl-names = "i2c-exio0"; 799 }; 800 801 &iic0 { 802 pinctrl-0 = <&iic0_pins>; 803 pinctrl-names = "i2c-exio0"; 804 }; 805 806 &i2c1 { 807 pinctrl-0 = <&i2c1_pins>; 808 pinctrl-names = "i2c-exio1"; 809 }; 810 811 &iic1 { 812 pinctrl-0 = <&iic1_pins>; 813 pinctrl-names = "i2c-exio1"; 814 }; 815 816 &i2c2 { 817 pinctrl-0 = <&i2c2_pins>; 818 pinctrl-names = "i2c-hdmi"; 819 820 clock-frequency = <100000>; 821 }; 822 823 &iic2 { 824 pinctrl-0 = <&iic2_pins>; 825 pinctrl-names = "i2c-hdmi"; 826 827 clock-frequency = <100000>; 828 }; 829 830 &i2c3 { 831 pinctrl-0 = <&i2c3_pins>; 832 pinctrl-names = "i2c-pwr"; 833 }; 834 835 &iic3 { 836 pinctrl-0 = <&iic3_pins>; 837 pinctrl-names = "i2c-pwr"; 838 }; 839 840 &pci0 { 841 status = "okay"; 842 pinctrl-0 = <&usb0_pins>; 843 pinctrl-names = "default"; 844 }; 845 846 &pci1 { 847 status = "okay"; 848 pinctrl-0 = <&usb1_pins>; 849 pinctrl-names = "default"; 850 }; 851 852 &xhci { 853 status = "okay"; 854 pinctrl-0 = <&usb2_pins>; 855 pinctrl-names = "default"; 856 }; 857 858 &pci2 { 859 status = "okay"; 860 pinctrl-0 = <&usb2_pins>; 861 pinctrl-names = "default"; 862 }; 863 864 &hsusb { 865 status = "okay"; 866 pinctrl-0 = <&hsusb_pins>; 867 pinctrl-names = "default"; 868 renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>; 869 }; 870 871 &usbphy { 872 status = "okay"; 873 }; 874 875 /* HDMI video input */ 876 &vin0 { 877 pinctrl-0 = <&vin0_pins>; 878 pinctrl-names = "default"; 879 880 status = "okay"; 881 882 port { 883 vin0ep2: endpoint { 884 remote-endpoint = <&adv7612_out>; 885 bus-width = <24>; 886 hsync-active = <0>; 887 vsync-active = <0>; 888 pclk-sample = <1>; 889 data-active = <1>; 890 }; 891 }; 892 }; 893 894 /* composite video input */ 895 &vin1 { 896 pinctrl-0 = <&vin1_pins>; 897 pinctrl-names = "default"; 898 899 status = "okay"; 900 901 port { 902 #address-cells = <1>; 903 #size-cells = <0>; 904 905 vin1ep0: endpoint { 906 remote-endpoint = <&adv7180>; 907 bus-width = <8>; 908 }; 909 }; 910 }; 911 912 &rcar_sound { 913 pinctrl-0 = <&sound_pins &sound_clk_pins>; 914 pinctrl-names = "default"; 915 916 /* Single DAI */ 917 #sound-dai-cells = <0>; 918 919 status = "okay"; 920 921 rcar_sound,dai { 922 dai0 { 923 playback = <&ssi0 &src2 &dvc0>; 924 capture = <&ssi1 &src3 &dvc1>; 925 }; 926 }; 927 }; 928 929 &ssi1 { 930 shared-pin; 931 }; 932
