1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * This header file describes this specific Xtensa processor's TIE extensions 4 * that extend basic Xtensa core functionality. It is customized to this 5 * Xtensa processor configuration. 6 * This file is autogenerated, please do not edit. 7 * 8 * Copyright (C) 1999-2010 Tensilica Inc. 9 */ 10 11 #ifndef _XTENSA_CORE_TIE_H 12 #define _XTENSA_CORE_TIE_H 13 14 #define XCHAL_CP_NUM 1 /* number of coprocessors */ 15 #define XCHAL_CP_MAX 8 /* max CP ID + 1 (0 if none) */ 16 #define XCHAL_CP_MASK 0x80 /* bitmask of all CPs by ID */ 17 #define XCHAL_CP_PORT_MASK 0x80 /* bitmask of only port CPs */ 18 19 /* Basic parameters of each coprocessor: */ 20 #define XCHAL_CP7_NAME "XTIOP" 21 #define XCHAL_CP7_IDENT XTIOP 22 #define XCHAL_CP7_SA_SIZE 0 /* size of state save area */ 23 #define XCHAL_CP7_SA_ALIGN 1 /* min alignment of save area */ 24 #define XCHAL_CP_ID_XTIOP 7 /* coprocessor ID (0..7) */ 25 26 /* Filler info for unassigned coprocessors, to simplify arrays etc: */ 27 #define XCHAL_CP0_SA_SIZE 0 28 #define XCHAL_CP0_SA_ALIGN 1 29 #define XCHAL_CP1_SA_SIZE 0 30 #define XCHAL_CP1_SA_ALIGN 1 31 #define XCHAL_CP2_SA_SIZE 0 32 #define XCHAL_CP2_SA_ALIGN 1 33 #define XCHAL_CP3_SA_SIZE 0 34 #define XCHAL_CP3_SA_ALIGN 1 35 #define XCHAL_CP4_SA_SIZE 0 36 #define XCHAL_CP4_SA_ALIGN 1 37 #define XCHAL_CP5_SA_SIZE 0 38 #define XCHAL_CP5_SA_ALIGN 1 39 #define XCHAL_CP6_SA_SIZE 0 40 #define XCHAL_CP6_SA_ALIGN 1 41 42 /* Save area for non-coprocessor optional and custom (TIE) state: */ 43 #define XCHAL_NCP_SA_SIZE 32 44 #define XCHAL_NCP_SA_ALIGN 4 45 46 /* Total save area for optional and custom state (NCP + CPn): */ 47 #define XCHAL_TOTAL_SA_SIZE 32 /* with 16-byte align padding */ 48 #define XCHAL_TOTAL_SA_ALIGN 4 /* actual minimum alignment */ 49 50 /* 51 * Detailed contents of save areas. 52 * NOTE: caller must define the XCHAL_SA_REG macro (not defined here) 53 * before expanding the XCHAL_xxx_SA_LIST() macros. 54 * 55 * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize, 56 * dbnum,base,regnum,bitsz,gapsz,reset,x...) 57 * 58 * s = passed from XCHAL_*_LIST(s), eg. to select how to expand 59 * ccused = set if used by compiler without special options or code 60 * abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global) 61 * kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg) 62 * opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg) 63 * name = lowercase reg name (no quotes) 64 * galign = group byte alignment (power of 2) (galign >= align) 65 * align = register byte alignment (power of 2) 66 * asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz) 67 * (not including any pad bytes required to galign this or next reg) 68 * dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>) 69 * base = reg shortname w/o index (or sr=special, ur=TIE user reg) 70 * regnum = reg index in regfile, or special/TIE-user reg number 71 * bitsz = number of significant bits (regfile width, or ur/sr mask bits) 72 * gapsz = intervening bits, if bitsz bits not stored contiguously 73 * (padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize) 74 * reset = register reset value (or 0 if undefined at reset) 75 * x = reserved for future use (0 until then) 76 * 77 * To filter out certain registers, e.g. to expand only the non-global 78 * registers used by the compiler, you can do something like this: 79 * 80 * #define XCHAL_SA_REG(s,ccused,p...) SELCC##ccused(p) 81 * #define SELCC0(p...) 82 * #define SELCC1(abikind,p...) SELAK##abikind(p) 83 * #define SELAK0(p...) REG(p) 84 * #define SELAK1(p...) REG(p) 85 * #define SELAK2(p...) 86 * #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \ 87 * ...what you want to expand... 88 */ 89 90 #define XCHAL_NCP_SA_NUM 8 91 #define XCHAL_NCP_SA_LIST(s) \ 92 XCHAL_SA_REG(s,1,2,1,1, threadptr, 4, 4, 4,0x03E7, ur,231, 32,0,0,0) \ 93 XCHAL_SA_REG(s,1,0,0,1, acclo, 4, 4, 4,0x0210, sr,16 , 32,0,0,0) \ 94 XCHAL_SA_REG(s,1,0,0,1, acchi, 4, 4, 4,0x0211, sr,17 , 8,0,0,0) \ 95 XCHAL_SA_REG(s,0,0,0,1, m0, 4, 4, 4,0x0220, sr,32 , 32,0,0,0) \ 96 XCHAL_SA_REG(s,0,0,0,1, m1, 4, 4, 4,0x0221, sr,33 , 32,0,0,0) \ 97 XCHAL_SA_REG(s,0,0,0,1, m2, 4, 4, 4,0x0222, sr,34 , 32,0,0,0) \ 98 XCHAL_SA_REG(s,0,0,0,1, m3, 4, 4, 4,0x0223, sr,35 , 32,0,0,0) \ 99 XCHAL_SA_REG(s,0,0,0,1, scompare1, 4, 4, 4,0x020C, sr,12 , 32,0,0,0) 100 101 #define XCHAL_CP0_SA_NUM 0 102 #define XCHAL_CP0_SA_LIST(s) /* empty */ 103 104 #define XCHAL_CP1_SA_NUM 0 105 #define XCHAL_CP1_SA_LIST(s) /* empty */ 106 107 #define XCHAL_CP2_SA_NUM 0 108 #define XCHAL_CP2_SA_LIST(s) /* empty */ 109 110 #define XCHAL_CP3_SA_NUM 0 111 #define XCHAL_CP3_SA_LIST(s) /* empty */ 112 113 #define XCHAL_CP4_SA_NUM 0 114 #define XCHAL_CP4_SA_LIST(s) /* empty */ 115 116 #define XCHAL_CP5_SA_NUM 0 117 #define XCHAL_CP5_SA_LIST(s) /* empty */ 118 119 #define XCHAL_CP6_SA_NUM 0 120 #define XCHAL_CP6_SA_LIST(s) /* empty */ 121 122 #define XCHAL_CP7_SA_NUM 0 123 #define XCHAL_CP7_SA_LIST(s) /* empty */ 124 125 /* Byte length of instruction from its first nibble (op0 field), per FLIX. */ 126 #define XCHAL_OP0_FORMAT_LENGTHS 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3 127 128 #endif /*_XTENSA_CORE_TIE_H*/ 129 130
