Home | History | Annotate | only in /external/u-boot/board/congatec/conga-qeval20-qa3-e3845
Up to higher level directory
NameDateSize
acpi/22-Oct-2020
conga-qeval20-qa3.c22-Oct-20201.4K
dsdt.asl22-Oct-2020296
Kconfig22-Oct-2020672
MAINTAINERS22-Oct-2020471
Makefile22-Oct-2020154
README22-Oct-20201K
start.S22-Oct-2020151

README

      1 ------------------------------
      2 U-Boot console UART selection:
      3 ------------------------------
      4 
      5 The U-Boot port for this congatec board currently supports two different
      6 configurations (defconfig files). The only difference is the UART that
      7 is used as the U-Boot console UART. The default defconfig file:
      8 
      9 conga-qeval20-qa3-e3845_defconfig
     10 
     11 provides this console on the UART0 which is provided via a Winbond
     12 Super-IO chip connected on the congatec Qseven 2.0 evaluation carrier
     13 board (conga-QEVAL). This UART is the one provided with a SubD9
     14 connector on the mainboard (the low one). The 2nd defconfig file:
     15 
     16 conga-qeval20-qa3-e3845-internal-uart_defconfig
     17 
     18 provides the U-Boot console on the BayTrail internal legacy UART,
     19 which is routed from the QSeven SoM to the X300 connector on the
     20 baseboard. Here is called COM2. The baseboard already provides the
     21 RS232 level shifters. So a TTL-USB UART adapter does not work in
     22 this case. The signals need to get connected directly to the
     23 RS232 level signals of the PC UART via some adapter cable.
     24