Home | History | Annotate | only in /external/u-boot/board/engicam/imx6q
Up to higher level directory
NameDateSize
imx6q.c22-Oct-20206.3K
Kconfig22-Oct-2020151
MAINTAINERS22-Oct-20201K
Makefile22-Oct-202099
README22-Oct-2020955

README

      1 Hsow to use U-Boot on Engicam i.CoreM6 (RQS) Solo/DualLite/Quad/Dual Starter Kit:
      2 --------------------------------------------------------------------------------
      3 
      4 $ make mrproper
      5 
      6 - Configure U-Boot for Engicam i.CoreM6 Quad/Duali/Solo/DualLite:
      7 $ make imx6qdl_icore_mmc_defconfig
      8 
      9 - Configure U-Boot for Engicam i.CoreM6 RQS Quad/Duali/Solo/DualLite:
     10 $ make imx6qdl_icore_rqs_defconfig
     11 
     12 - Build U-Boot
     13 $ make
     14 
     15 This will generate the SPL image called SPL and the u-boot-dtb.img.
     16 
     17 - Flash the SPL image into the micro SD card:
     18 
     19 sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
     20 
     21 - Flash the u-boot-dtb.img image into the micro SD card:
     22 
     23 sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync
     24 
     25 - Jumper settings:
     26 
     27 MMC Boot: JM3 Closed
     28 
     29 - Connect the Serial cable between the Starter Kit and the PC for the console.
     30 (J28 is the Linux Serial console connector)
     31 
     32 - Insert the micro SD card in the board, power it up and U-Boot messages should
     33 come up.
     34