1 Overview 2 -------- 3 The LS1088A Reference Design (RDB) is a high-performance computing, 4 evaluation, and development platform that supports ARM SoC LS1088A and its 5 derivatives. 6 7 8 LS1088A SoC Overview 9 -------------------------------------- 10 Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc 11 12 RDB Default Switch Settings (1: ON; 0: OFF) 13 ------------------------------------------- 14 15 For QSPI Boot 16 SW1 0011 0001 17 SW2 x100 0000 18 SW3 1111 0010 19 SW4 1001 0011 20 SW5 1111 0000 21 22 For SD Boot 23 SW1 0010 0000 24 SW2 0100 0000 25 SW3 1111 0010 26 SW4 1001 0011 27 SW5 1111 0000 28 29 For eMMC Boot 30 SW1 0010 0000 31 SW2 1100 0000 32 SW3 1111 0010 33 SW4 1001 0011 34 SW5 1111 0000 35 36 Alternately you can use this command to switch from QSPI to SD 37 38 => i2c mw 66 0x60 0x20; i2c mw 66 10 10;i2c mw 66 10 21 39 40 LS1088ARDB board Overview 41 ------------------------- 42 - SERDES Connections, 16 lanes supporting: 43 - PCI Express - 3.0 44 - SATA 3.0 45 - XFI 46 - QSGMII 47 - DDR Controller 48 - One ports of 72-bits (8-bits ECC, 64-bits DATA) DDR4. Each port supports four 49 chip-selects on one DIMM connector. Support is up to 2133MT/s, Although MAX default 50 with FSL refernce software is 2100MT/s 51 - 2 QSPI-NOR Spansion(S25FS512SDSMFI011) flash of size 64MB 52 - IFC/Local Bus 53 - One 2 GB NAND flash with ECC support, not as boot source 54 - CPLD of size 2K 55 - USB 3.0 56 - Two high speed USB 3.0 ports 57 - First USB 3.0 port configured as Host with Type-A connector 58 - Second USB 3.0 port configured as OTG with micro-AB connector 59 - SDHC/eMMC 60 - SDHC slot and onboard eMMC are muxed together 61 - 4 I2C controllers 62 - Two SATA onboard connectors 63 - 2 UART 64 - JTAG support 65 - QSPI emulator support 66 - TDM riser support 67 68 QDS Default Switch Settings (1: ON; 0: OFF) 69 ------------------------------------------- 70 71 For 16b IFC-NOR 72 SW1 0001 0010 73 SW2 x110 1111 74 75 For QSPI Boot 76 SW1 0011 0001 77 SW2 0110 1111 78 79 For SD Boot 80 SW1 0010 0000 81 SW2 0110 1111 82 83 For eMMC Boot 84 SW1 0010 0000 85 SW2 1110 1111 86 87 For I2C (ext. addr.) 88 SW1 0010 0100 89 SW2 1110 1111 90 91 SW3 to SW12 are identical for all boot source 92 93 SW3 0010 0100 94 SW4 0010 0000 95 SW5 1110 0111 96 SW6 1110 1000 97 SW7 0001 1101 98 SW8 0000 1101 99 SW9 1100 1010 100 SW10 1110 1000 101 SW11 1111 0100 102 SW12 1111 1111 103 104 LS1088AQDS board Overview 105 ------------------------- 106 - SERDES Connections, 16 lanes supporting: 107 - PCI Express - 3.0 108 - SATA 3.0 109 - 2 XFI 110 - QSGMII, SGMII with help for Riser card 111 - 2 RGMII 112 - 5 slot for Riser card or PCIe NIC 113 - DDR Controller 114 - One ports of 72-bits (8-bits ECC, 64-bits DATA) DDR4. Each port supports four 115 chip-selects on one DIMM connector. Support is up to 2133MT/s, Although MAX default 116 with FSL refernce software is 2100MT/s 117 - 2 QSPI-NOR Spansion(S25FS512SDSMFI011) flash of size 64MB 118 - IFC/Local Bus 119 - One 2 GB NAND flash with ECC support, not as boot source 120 - CPLD of size 2K 121 - USB 3.0 122 - Two high speed USB 3.0 ports 123 - First USB 3.0 port configured as Host with Type-A connector 124 - Second USB 3.0 port configured as OTG with micro-AB connector 125 - SDHC/eMMC 126 - SDHC/eMMC slot via adaptor 127 - 4 I2C controllers 128 - Two SATA onboard connectors 129 - 2 UART 130 - JTAG support 131 - DSPI 132 - PROMJET support 133 - QSPI emulator support 134 - TDM riser support 135 136 QSPI flash memory map valid for both QDS and RDB 137 Image Flash Offset 138 RCW+PBI 0x00000000 139 Boot firmware (U-Boot) 0x00100000 140 Boot firmware Environment 0x00300000 141 PPA firmware 0x00400000 142 DPAA2 MC 0x00A00000 143 DPAA2 DPL 0x00D00000 144 DPAA2 DPC 0x00E00000 145 Kernel.itb 0x01000000 146
