1 Overview 2 -------- 3 The LS2080A Reference Design (RDB) is a high-performance computing, 4 evaluation, and development platform that supports the QorIQ LS2080A, LS2088A 5 Layerscape Architecture processor. 6 7 The LS2081A Reference Design (RDB) is a high-performance computing, 8 evaluation, and development platform that supports the QorIQ LS2081A 9 Layerscape Architecture processor.More details in below sections 10 11 LS2080A, LS2088A, LS2081A SoC Overview 12 -------------------------------------- 13 Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS2080A, 14 LS2081A, LS2088A SoC overview. 15 16 LS2080ARDB board Overview 17 ----------------------- 18 - SERDES Connections, 16 lanes supporting: 19 - PCI Express - 3.0 20 - SATA 3.0 21 - XFI 22 - DDR Controller 23 - Two ports of 72-bits (8-bits ECC) DDR4. Each port supports four 24 chip-selects and two DIMM connectors. Support is up to 2133MT/s. 25 - One port of 40-bits (8-bits ECC) DDR4 which supports four chip-selects 26 and two DIMM connectors. Support is up to 1600MT/s. 27 -IFC/Local Bus 28 - IFC rev. 2.0 implementation supporting Little Endian connection scheme. 29 - 128 MB NOR flash 16-bit data bus 30 - One 2 GB NAND flash with ECC support 31 - CPLD connection 32 - USB 3.0 33 - Two high speed USB 3.0 ports 34 - First USB 3.0 port configured as Host with Type-A connector 35 - Second USB 3.0 port configured as OTG with micro-AB connector 36 - SDHC adapter 37 - SD Card Rev 2.0 and Rev 3.0 38 - DSPI 39 - 128 MB high-speed flash Memory for boot code and storage (up to 108MHz) 40 - 4 I2C controllers 41 - Two SATA onboard connectors 42 - UART 43 - ARM JTAG support 44 45 LS2081ARDB board Overview 46 ------------------------- 47 LS2081ARDB board is similar to LS2080ARDB board 48 with few differences like 49 - Hosts LS2081A SoC 50 - Default boot source is QSPI-boot 51 - Does not have IFC interface 52 - RTC and QSPI flash devices are different 53 - Provides QIXIS access via I2C 54 55 Memory map from core's view 56 ---------------------------- 57 0x00_0000_0000 .. 0x00_000F_FFFF Boot Rom 58 0x00_0100_0000 .. 0x00_0FFF_FFFF CCSR 59 0x00_1800_0000 .. 0x00_181F_FFFF OCRAM 60 0x00_2000_0000 .. 0x00_2FFF_FFFF QSPI region #1 61 0x00_3000_0000 .. 0x00_3FFF_FFFF IFC region #1 62 0x00_8000_0000 .. 0x00_FFFF_FFFF DDR region #1 63 0x05_1000_0000 .. 0x05_FFFF_FFFF IFC region #2 64 0x80_8000_0000 .. 0xFF_FFFF_FFFF DDR region #2 65 66 Other addresses are either reserved, or not used directly by U-Boot. 67 This list should be updated when more addresses are used. 68 69 IFC region map from core's view 70 ------------------------------- 71 During boot i.e. IFC Region #1:- 72 0x30000000 - 0x37ffffff : 128MB : NOR flash 73 0x3C000000 - 0x40000000 : 64MB : CPLD 74 75 After relocate to DDR i.e. IFC Region #2:- 76 0x5_1000_0000..0x5_1fff_ffff Memory Hole 77 0x5_2000_0000..0x5_3fff_ffff IFC CSx (CPLD, NAND and others 512MB) 78 0x5_4000_0000..0x5_7fff_ffff ASIC or others 1GB 79 0x5_8000_0000..0x5_bfff_ffff IFC CS0 1GB (NOR/Promjet) 80 0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet) 81 82 Booting Options 83 --------------- 84 a) NOR boot 85 b) NAND boot 86 c) QSPI boot 87 88 Memory map for NOR boot 89 ------------------------- 90 Image Flash Offset 91 RCW+PBI 0x00000000 92 Boot firmware (U-Boot) 0x00100000 93 Boot firmware Environment 0x00300000 94 PPA firmware 0x00400000 95 Secure Headers 0x00600000 96 Cortina PHY firmware 0x00980000 97 DPAA2 MC 0x00A00000 98 DPAA2 DPL 0x00D00000 99 DPAA2 DPC 0x00E00000 100 Kernel.itb 0x01000000 101 102 cfg_rcw_src switches needs to be changed for booting from different option. 103 Refer to board documentation for correct switch setting. 104 105 QSPI boot details 106 =================== 107 Supported only for 108 LS2088ARDB RevF board with LS2088A SoC. 109 110 Images needs to be copied to QSPI flash 111 as per memory map given below. 112 113 Memory map for QSPI flash 114 ------------------------- 115 Image Flash Offset 116 RCW+PBI 0x00000000 117 Boot firmware (U-Boot) 0x00100000 118 Boot firmware Environment 0x00300000 119 PPA firmware 0x00400000 120 Cortina PHY firmware 0x00980000 121 DPAA2 MC 0x00A00000 122 DPAA2 DPL 0x00D00000 123 DPAA2 DPC 0x00E00000 124 Kernel.itb 0x01000000 125 126 Booting Linux flavors which do not support 48-bit VA (< Linux 3.18) 127 ------------------------------------------------------------------- 128 One needs to use appropriate bootargs to boot Linux flavors which do 129 not support 48-bit VA (for e.g. < Linux 3.18) by appending mem=2048M, as shown 130 below: 131 132 => setenv bootargs 'console=ttyS1,115200 root=/dev/ram 133 earlycon=uart8250,mmio,0x21c0600,115200 default_hugepagesz=2m hugepagesz=2m 134 hugepages=16 mem=2048M' 135 136
