1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Copyright (C) 2014 Freescale Semiconductor, Inc. 4 * 5 * Author: Ye Li <ye.li (at) nxp.com> 6 */ 7 8 #include <asm/arch/clock.h> 9 #include <asm/arch/crm_regs.h> 10 #include <asm/arch/iomux.h> 11 #include <asm/arch/imx-regs.h> 12 #include <asm/arch/mx6-pins.h> 13 #include <asm/arch/sys_proto.h> 14 #include <asm/gpio.h> 15 #include <asm/mach-imx/iomux-v3.h> 16 #include <asm/mach-imx/boot_mode.h> 17 #include <asm/io.h> 18 #include <linux/sizes.h> 19 #include <common.h> 20 #include <fsl_esdhc.h> 21 #include <miiphy.h> 22 #include <netdev.h> 23 #include <power/pmic.h> 24 #include <power/pfuze100_pmic.h> 25 #include "../common/pfuze.h" 26 #include <usb.h> 27 #include <usb/ehci-ci.h> 28 #include <pca953x.h> 29 30 DECLARE_GLOBAL_DATA_PTR; 31 32 #define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ 33 PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ 34 PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) 35 36 #define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \ 37 PAD_CTL_SPEED_HIGH | \ 38 PAD_CTL_DSE_48ohm | PAD_CTL_SRE_FAST) 39 40 #define ENET_CLK_PAD_CTRL (PAD_CTL_SPEED_MED | \ 41 PAD_CTL_DSE_120ohm | PAD_CTL_SRE_FAST) 42 43 #define ENET_RX_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ 44 PAD_CTL_SPEED_HIGH | PAD_CTL_SRE_FAST) 45 46 #define GPMI_PAD_CTRL0 (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP) 47 #define GPMI_PAD_CTRL1 (PAD_CTL_DSE_40ohm | PAD_CTL_SPEED_MED | \ 48 PAD_CTL_SRE_FAST) 49 #define GPMI_PAD_CTRL2 (GPMI_PAD_CTRL0 | GPMI_PAD_CTRL1) 50 51 int dram_init(void) 52 { 53 gd->ram_size = imx_ddr_size(); 54 55 return 0; 56 } 57 58 static iomux_v3_cfg_t const uart1_pads[] = { 59 MX6_PAD_GPIO1_IO04__UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL), 60 MX6_PAD_GPIO1_IO05__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL), 61 }; 62 63 static iomux_v3_cfg_t const fec2_pads[] = { 64 MX6_PAD_ENET1_MDC__ENET2_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), 65 MX6_PAD_ENET1_MDIO__ENET2_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), 66 MX6_PAD_RGMII2_RX_CTL__ENET2_RX_EN | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), 67 MX6_PAD_RGMII2_RD0__ENET2_RX_DATA_0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), 68 MX6_PAD_RGMII2_RD1__ENET2_RX_DATA_1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), 69 MX6_PAD_RGMII2_RD2__ENET2_RX_DATA_2 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), 70 MX6_PAD_RGMII2_RD3__ENET2_RX_DATA_3 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), 71 MX6_PAD_RGMII2_RXC__ENET2_RX_CLK | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), 72 MX6_PAD_RGMII2_TX_CTL__ENET2_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), 73 MX6_PAD_RGMII2_TD0__ENET2_TX_DATA_0 | MUX_PAD_CTRL(ENET_PAD_CTRL), 74 MX6_PAD_RGMII2_TD1__ENET2_TX_DATA_1 | MUX_PAD_CTRL(ENET_PAD_CTRL), 75 MX6_PAD_RGMII2_TD2__ENET2_TX_DATA_2 | MUX_PAD_CTRL(ENET_PAD_CTRL), 76 MX6_PAD_RGMII2_TD3__ENET2_TX_DATA_3 | MUX_PAD_CTRL(ENET_PAD_CTRL), 77 MX6_PAD_RGMII2_TXC__ENET2_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), 78 }; 79 80 static void setup_iomux_uart(void) 81 { 82 imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); 83 } 84 85 static int setup_fec(void) 86 { 87 struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; 88 89 /* Use 125MHz anatop loopback REF_CLK1 for ENET2 */ 90 clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC2_MASK, 0); 91 92 return enable_fec_anatop_clock(1, ENET_125MHZ); 93 } 94 95 int board_eth_init(bd_t *bis) 96 { 97 int ret; 98 99 imx_iomux_v3_setup_multiple_pads(fec2_pads, ARRAY_SIZE(fec2_pads)); 100 setup_fec(); 101 102 ret = fecmxc_initialize_multi(bis, 1, 103 CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE); 104 if (ret) 105 printf("FEC%d MXC: %s:failed\n", 1, __func__); 106 107 return ret; 108 } 109 110 int board_phy_config(struct phy_device *phydev) 111 { 112 /* 113 * Enable 1.8V(SEL_1P5_1P8_POS_REG) on 114 * Phy control debug reg 0 115 */ 116 phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f); 117 phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8); 118 119 /* rgmii tx clock delay enable */ 120 phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05); 121 phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100); 122 123 if (phydev->drv->config) 124 phydev->drv->config(phydev); 125 126 return 0; 127 } 128 129 int power_init_board(void) 130 { 131 struct udevice *dev; 132 int ret; 133 u32 dev_id, rev_id, i; 134 u32 switch_num = 6; 135 u32 offset = PFUZE100_SW1CMODE; 136 137 ret = pmic_get("pfuze100", &dev); 138 if (ret == -ENODEV) 139 return 0; 140 141 if (ret != 0) 142 return ret; 143 144 dev_id = pmic_reg_read(dev, PFUZE100_DEVICEID); 145 rev_id = pmic_reg_read(dev, PFUZE100_REVID); 146 printf("PMIC: PFUZE100! DEV_ID=0x%x REV_ID=0x%x\n", dev_id, rev_id); 147 148 149 /* Init mode to APS_PFM */ 150 pmic_reg_write(dev, PFUZE100_SW1ABMODE, APS_PFM); 151 152 for (i = 0; i < switch_num - 1; i++) 153 pmic_reg_write(dev, offset + i * SWITCH_SIZE, APS_PFM); 154 155 /* set SW1AB staby volatage 0.975V */ 156 pmic_clrsetbits(dev, PFUZE100_SW1ABSTBY, 0x3f, 0x1b); 157 158 /* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */ 159 pmic_clrsetbits(dev, PFUZE100_SW1ABCONF, 0xc0, 0x40); 160 161 /* set SW1C staby volatage 1.10V */ 162 pmic_clrsetbits(dev, PFUZE100_SW1CSTBY, 0x3f, 0x20); 163 164 /* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */ 165 pmic_clrsetbits(dev, PFUZE100_SW1CCONF, 0xc0, 0x40); 166 167 return 0; 168 } 169 170 #ifdef CONFIG_USB_EHCI_MX6 171 #define USB_OTHERREGS_OFFSET 0x800 172 #define UCTRL_PWR_POL (1 << 9) 173 174 static iomux_v3_cfg_t const usb_otg_pads[] = { 175 /* OGT1 */ 176 MX6_PAD_GPIO1_IO09__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), 177 MX6_PAD_GPIO1_IO10__ANATOP_OTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL), 178 /* OTG2 */ 179 MX6_PAD_GPIO1_IO12__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL) 180 }; 181 182 static void setup_usb(void) 183 { 184 imx_iomux_v3_setup_multiple_pads(usb_otg_pads, 185 ARRAY_SIZE(usb_otg_pads)); 186 } 187 188 int board_usb_phy_mode(int port) 189 { 190 if (port == 1) 191 return USB_INIT_HOST; 192 else 193 return usb_phy_mode(port); 194 } 195 196 int board_ehci_hcd_init(int port) 197 { 198 u32 *usbnc_usb_ctrl; 199 200 if (port > 1) 201 return -EINVAL; 202 203 usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET + 204 port * 4); 205 206 /* Set Power polarity */ 207 setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL); 208 209 return 0; 210 } 211 #endif 212 213 int board_early_init_f(void) 214 { 215 setup_iomux_uart(); 216 217 return 0; 218 } 219 220 #ifdef CONFIG_FSL_QSPI 221 222 #define QSPI_PAD_CTRL1 \ 223 (PAD_CTL_SRE_FAST | PAD_CTL_SPEED_HIGH | \ 224 PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_40ohm) 225 226 static iomux_v3_cfg_t const quadspi_pads[] = { 227 MX6_PAD_QSPI1A_SS0_B__QSPI1_A_SS0_B | MUX_PAD_CTRL(QSPI_PAD_CTRL1), 228 MX6_PAD_QSPI1A_SCLK__QSPI1_A_SCLK | MUX_PAD_CTRL(QSPI_PAD_CTRL1), 229 MX6_PAD_QSPI1A_DATA0__QSPI1_A_DATA_0 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), 230 MX6_PAD_QSPI1A_DATA1__QSPI1_A_DATA_1 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), 231 MX6_PAD_QSPI1A_DATA2__QSPI1_A_DATA_2 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), 232 MX6_PAD_QSPI1A_DATA3__QSPI1_A_DATA_3 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), 233 MX6_PAD_QSPI1B_SS0_B__QSPI1_B_SS0_B | MUX_PAD_CTRL(QSPI_PAD_CTRL1), 234 MX6_PAD_QSPI1B_SCLK__QSPI1_B_SCLK | MUX_PAD_CTRL(QSPI_PAD_CTRL1), 235 MX6_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), 236 MX6_PAD_QSPI1B_DATA1__QSPI1_B_DATA_1 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), 237 MX6_PAD_QSPI1B_DATA2__QSPI1_B_DATA_2 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), 238 MX6_PAD_QSPI1B_DATA3__QSPI1_B_DATA_3 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), 239 }; 240 241 int board_qspi_init(void) 242 { 243 /* Set the iomux */ 244 imx_iomux_v3_setup_multiple_pads(quadspi_pads, 245 ARRAY_SIZE(quadspi_pads)); 246 247 /* Set the clock */ 248 enable_qspi_clk(0); 249 250 return 0; 251 } 252 #endif 253 254 #ifdef CONFIG_NAND_MXS 255 iomux_v3_cfg_t gpmi_pads[] = { 256 MX6_PAD_NAND_CLE__RAWNAND_CLE | MUX_PAD_CTRL(GPMI_PAD_CTRL2), 257 MX6_PAD_NAND_ALE__RAWNAND_ALE | MUX_PAD_CTRL(GPMI_PAD_CTRL2), 258 MX6_PAD_NAND_WP_B__RAWNAND_WP_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2), 259 MX6_PAD_NAND_READY_B__RAWNAND_READY_B | MUX_PAD_CTRL(GPMI_PAD_CTRL0), 260 MX6_PAD_NAND_CE0_B__RAWNAND_CE0_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2), 261 MX6_PAD_NAND_RE_B__RAWNAND_RE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2), 262 MX6_PAD_NAND_WE_B__RAWNAND_WE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2), 263 MX6_PAD_NAND_DATA00__RAWNAND_DATA00 | MUX_PAD_CTRL(GPMI_PAD_CTRL2), 264 MX6_PAD_NAND_DATA01__RAWNAND_DATA01 | MUX_PAD_CTRL(GPMI_PAD_CTRL2), 265 MX6_PAD_NAND_DATA02__RAWNAND_DATA02 | MUX_PAD_CTRL(GPMI_PAD_CTRL2), 266 MX6_PAD_NAND_DATA03__RAWNAND_DATA03 | MUX_PAD_CTRL(GPMI_PAD_CTRL2), 267 MX6_PAD_NAND_DATA04__RAWNAND_DATA04 | MUX_PAD_CTRL(GPMI_PAD_CTRL2), 268 MX6_PAD_NAND_DATA05__RAWNAND_DATA05 | MUX_PAD_CTRL(GPMI_PAD_CTRL2), 269 MX6_PAD_NAND_DATA06__RAWNAND_DATA06 | MUX_PAD_CTRL(GPMI_PAD_CTRL2), 270 MX6_PAD_NAND_DATA07__RAWNAND_DATA07 | MUX_PAD_CTRL(GPMI_PAD_CTRL2), 271 }; 272 273 static void setup_gpmi_nand(void) 274 { 275 struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; 276 277 /* config gpmi nand iomux */ 278 imx_iomux_v3_setup_multiple_pads(gpmi_pads, ARRAY_SIZE(gpmi_pads)); 279 280 setup_gpmi_io_clk((MXC_CCM_CS2CDR_QSPI2_CLK_PODF(0) | 281 MXC_CCM_CS2CDR_QSPI2_CLK_PRED(3) | 282 MXC_CCM_CS2CDR_QSPI2_CLK_SEL(3))); 283 284 /* enable apbh clock gating */ 285 setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK); 286 } 287 #endif 288 289 int board_init(void) 290 { 291 struct gpio_desc desc; 292 int ret; 293 294 /* Address of boot parameters */ 295 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; 296 297 ret = dm_gpio_lookup_name("gpio@30_4", &desc); 298 if (ret) 299 return ret; 300 301 ret = dm_gpio_request(&desc, "cpu_per_rst_b"); 302 if (ret) 303 return ret; 304 /* Reset CPU_PER_RST_B signal for enet phy and PCIE */ 305 dm_gpio_set_dir_flags(&desc, GPIOD_IS_OUT); 306 udelay(500); 307 dm_gpio_set_value(&desc, 1); 308 309 ret = dm_gpio_lookup_name("gpio@32_2", &desc); 310 if (ret) 311 return ret; 312 313 ret = dm_gpio_request(&desc, "steer_enet"); 314 if (ret) 315 return ret; 316 317 dm_gpio_set_dir_flags(&desc, GPIOD_IS_OUT); 318 udelay(500); 319 /* Set steering signal to L for selecting B0 */ 320 dm_gpio_set_value(&desc, 0); 321 322 #ifdef CONFIG_USB_EHCI_MX6 323 setup_usb(); 324 #endif 325 326 #ifdef CONFIG_FSL_QSPI 327 board_qspi_init(); 328 #endif 329 330 #ifdef CONFIG_NAND_MXS 331 setup_gpmi_nand(); 332 #endif 333 334 return 0; 335 } 336 337 #ifdef CONFIG_CMD_BMODE 338 static const struct boot_mode board_boot_modes[] = { 339 {"sda", MAKE_CFGVAL(0x42, 0x30, 0x00, 0x00)}, 340 {"sdb", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)}, 341 {"qspi1", MAKE_CFGVAL(0x10, 0x00, 0x00, 0x00)}, 342 {"nand", MAKE_CFGVAL(0x82, 0x00, 0x00, 0x00)}, 343 {NULL, 0}, 344 }; 345 #endif 346 347 int board_late_init(void) 348 { 349 #ifdef CONFIG_CMD_BMODE 350 add_board_boot_modes(board_boot_modes); 351 #endif 352 353 return 0; 354 } 355 356 int checkboard(void) 357 { 358 puts("Board: MX6SX SABRE AUTO\n"); 359 360 return 0; 361 } 362
