Home | History | Annotate | only in /external/u-boot/board/freescale/mx6ul_14x14_evk
Up to higher level directory
NameDateSize
Kconfig22-Oct-2020193
MAINTAINERS22-Oct-2020205
Makefile22-Oct-2020116
mx6ul_14x14_evk.c22-Oct-202022.5K
README22-Oct-2020832

README

      1 How to use U-Boot on Freescale MX6UL 14x14 EVK
      2 -----------------------------------------------
      3 
      4 - Build U-Boot for MX6UL 14x14 EVK:
      5 
      6 $ make mrproper
      7 $ make mx6ul_14x14_evk_defconfig
      8 $ make
      9 
     10 This will generate the SPL image called SPL and the u-boot.img.
     11 
     12 - Flash the SPL image into the micro SD card:
     13 
     14 sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
     15 
     16 - Flash the u-boot.img image into the micro SD card:
     17 
     18 sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync
     19 
     20 - Jumper settings:
     21 
     22 SW601: 0 0 1 0
     23 Sw602: 1 0
     24 
     25 where 0 means bottom position and 1 means top position (from the
     26 switch label numbers reference).
     27 
     28 - Connect the USB cable between the EVK and the PC for the console.
     29 (The USB console connector is the one close the push buttons)
     30 
     31 - Insert the micro SD card in the board, power it up and U-Boot messages should
     32 come up.
     33