1 T2080PCIe-RDB is a Freescale Reference Design Board that hosts the T2080 SoC. 2 It can work in two mode: standalone mode and PCIe endpoint mode. 3 4 T2080 SoC Overview 5 ------------------ 6 The T2080 QorIQ multicore processor combines four dual-threaded e6500 Power 7 Architecture processor cores with high-performance datapath acceleration 8 logic and network and peripheral bus interfaces required for networking, 9 telecom/datacom, wireless infrastructure, and mil/aerospace applications. 10 11 T2080 includes the following functions and features: 12 - Four dual-threads 64-bit Power architecture e6500 cores, up to 1.8GHz 13 - 2MB L2 cache and 512KB CoreNet platform cache (CPC) 14 - Hierarchical interconnect fabric 15 - One 32-/64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving 16 - Data Path Acceleration Architecture (DPAA) incorporating acceleration 17 - 16 SerDes lanes up to 10.3125 GHz 18 - 8 Ethernet interfaces, supporting combinations of the following: 19 - Up to four 10 Gbps Ethernet MACs 20 - Up to eight 1 Gbps Ethernet MACs 21 - Up to four 2.5 Gbps Ethernet MACs 22 - High-speed peripheral interfaces 23 - Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV) 24 - Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz 25 - Additional peripheral interfaces 26 - Two serial ATA (SATA 2.0) controllers 27 - Two high-speed USB 2.0 controllers with integrated PHY 28 - Enhanced secure digital host controller (SD/SDHC/SDXC/eMMC) 29 - Enhanced serial peripheral interface (eSPI) 30 - Four I2C controllers 31 - Four 2-pin UARTs or two 4-pin UARTs 32 - Integrated Flash Controller supporting NAND and NOR flash 33 - Three eight-channel DMA engines 34 - Support for hardware virtualization and partitioning enforcement 35 - QorIQ Platform's Trust Architecture 2.0 36 37 Differences between T2080 and T2081 38 ----------------------------------- 39 Feature T2080 T2081 40 1G Ethernet numbers: 8 6 41 10G Ethernet numbers: 4 2 42 SerDes lanes: 16 8 43 Serial RapidIO,RMan: 2 no 44 SATA Controller: 2 no 45 Aurora: yes no 46 SoC Package: 896-pins 780-pins 47 48 49 T2080PCIe-RDB board Overview 50 ---------------------------- 51 - SERDES Configuration 52 - SerDes-1 Lane A-B: to two 10G XFI fiber (MAC9 & MAC10) 53 - SerDes-1 Lane C-D: to two 10G Base-T (MAC1 & MAC2) 54 - SerDes-1 Lane E-H: to PCIe Goldfinger (PCIe4 x4, Gen3) 55 - SerDes-2 Lane A-D: to PCIe Slot (PCIe1 x4, Gen2) 56 - SerDes-2 Lane E-F: to C293 secure co-processor (PCIe2 x2) 57 - SerDes-2 Lane G-H: to SATA1 & SATA2 58 - Ethernet 59 - Two on-board 10M/100M/1G RGMII ethernet ports 60 - Two on-board 10Gbps XFI fiber ports 61 - Two on-board 10Gbps Base-T copper ports 62 - DDR Memory 63 - Supports 72bit 4GB DDR3-LP SODIMM 64 - PCIe 65 - One PCIe x4 gold-finger 66 - One PCIe x4 connector 67 - One PCIe x2 end-point device (C293 Crypto co-processor) 68 - IFC/Local Bus 69 - NOR: 128MB 16-bit NOR Flash 70 - NAND: 1GB 8-bit NAND flash 71 - CPLD: for system controlling with programable header on-board 72 - SATA 73 - Two SATA 2.0 onnectors on-board 74 - USB 75 - Supports two USB 2.0 ports with integrated PHYs 76 - Two type A ports with 5V (a] 1.5A per port. 77 - SDHC 78 - one TF-card connector on-board 79 - SPI 80 - On-board 64MB SPI flash 81 - Other 82 - Two Serial ports 83 - Four I2C ports 84 85 86 System Memory map 87 ----------------- 88 Start Address End Address Description Size 89 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB 90 0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB 91 0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB 92 0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB 93 0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB 94 0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB 95 0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB 96 0xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB 97 0xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB 98 0xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB 99 0xF_0000_0000 0xF_003F_FFFF DCSR 4MB 100 0xC_4000_0000 0xC_4FFF_FFFF PCI Express 4 Mem Space 256MB 101 0xC_3000_0000 0xC_3FFF_FFFF PCI Express 3 Mem Space 256MB 102 0xC_2000_0000 0xC_2FFF_FFFF PCI Express 2 Mem Space 256MB 103 0xC_0000_0000 0xC_1FFF_FFFF PCI Express 1 Mem Space 512MB 104 0x0_0000_0000 0x0_ffff_ffff DDR 4GB 105 106 107 128M NOR Flash memory Map 108 ------------------------- 109 Start Address End Address Definition Max size 110 0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB 111 0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB 112 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB 113 0xEFE00000 0xEFE3FFFF PHY CS4315 firmware 256KB 114 0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB 115 0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB 116 0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB 117 0xEC000000 0xEC01FFFF RCW (alt bank) 128KB 118 0xEBF40000 0xEBFFFFFF U-Boot (alt bank) 768KB 119 0xEBF20000 0xEBF3FFFF U-Boot env (alt bank) 128KB 120 0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB 121 0xEBE00000 0xEBE3FFFF PHY CS4315 firmware (alt bank) 256KB 122 0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB 123 0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 1MB 124 0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB 125 0xE8000000 0xE801FFFF RCW (current bank) 128KB 126 127 128 T2080PCIe-RDB Ethernet Port Map 129 ------------------------------- 130 Label In Uboot In Linux FMan Address Comments PHY 131 ETH0 FM1@GTEC1 fm1-mac9 0xfe4f0000 10G SFP+ (CS4315) 132 ETH1 FM1@GTEC2 fm1-mac10 0xfe4f2000 10G SFP+ (CS4315) 133 ETH2 FM1@GTEC3 fm1-mac1 0xfe4e0000 10G Base-T (AQ1202) 134 ETH3 FM1@GTEC4 fm1-mac2 0xfe4e2000 10G Base-T (AQ1202) 135 ETH4 FM1@DTSEC3 fm1-mac3 0xfe4e4000 1G RGMII (RTL8211E) 136 ETH5 FM1@DTSEC4 fm1-mac4 0xfe4e6000 1G RGMII (RTL8211E) 137 138 139 T2080PCIe-RDB Default DIP-Switch setting 140 ---------------------------------------- 141 SW1[1:8] = '00010011' 142 SW2[1:8] = '10111111' 143 SW3[1:8] = '11100001' 144 145 Software configurations and board settings 146 ------------------------------------------ 147 1. NOR boot: 148 a. build NOR boot image 149 $ make T2080RDB_config 150 $ make 151 b. program u-boot.bin image to NOR flash 152 => tftp 1000000 u-boot.bin 153 => pro off all;era eff40000 efffffff;cp.b 1000000 eff40000 $filesize 154 set SW1[1:8] = '00010011', SW2[1] = '1', SW3[4] = '0' for NOR boot 155 156 Switching between default bank and alternate bank on NOR flash 157 To change boot source to vbank4: 158 via software: run command 'cpld reset altbank' in U-Boot. 159 via DIP-switch: set SW3[5:7] = '100' 160 161 To change boot source to vbank0: 162 via software: run command 'cpld reset' in U-Boot. 163 via DIP-Switch: set SW3[5:7] = '000' 164 165 2. NAND Boot: 166 a. build PBL image for NAND boot 167 $ make T2080RDB_NAND_config 168 $ make 169 b. program u-boot-with-spl-pbl.bin to NAND flash 170 => tftp 1000000 u-boot-with-spl-pbl.bin 171 => nand erase 0 d0000 172 => nand write 1000000 0 $filesize 173 set SW1[1:8] = '10000010', SW2[1] = '1', SW3[4] = '1' for NAND boot 174 175 3. SPI Boot: 176 a. build PBL image for SPI boot 177 $ make T2080RDB_SPIFLASH_config 178 $ make 179 b. program u-boot-with-spl-pbl.bin to SPI flash 180 => tftp 1000000 u-boot-with-spl-pbl.bin 181 => sf probe 0 182 => sf erase 0 d0000 183 => sf write 1000000 0 $filesize 184 set SW1[1:8] = '00100010', SW2[1] ='1' for SPI boot 185 186 4. SD Boot: 187 a. build PBL image for SD boot 188 $ make T2080RDB_SDCARD_config 189 $ make 190 b. program u-boot-with-spl-pbl.bin to micro-SD/TF card 191 => tftp 1000000 u-boot-with-spl-pbl.bin 192 => mmc write 1000000 8 0x800 193 set SW1[1:8] = '00100000', SW2[1] = '0' for SD boot 194 195 196 2-stage NAND/SPI/SD boot loader 197 ------------------------------- 198 PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM. 199 SPL further initializes DDR using SPD and environment variables 200 and copy U-Boot(768 KB) from NAND/SPI/SD device to DDR. 201 Finally SPL transers control to U-Boot for futher booting. 202 203 SPL has following features: 204 - Executes within 256K 205 - No relocation required 206 207 Run time view of SPL framework 208 ------------------------------------------------- 209 |Area | Address | 210 ------------------------------------------------- 211 |SecureBoot header | 0xFFFC0000 (32KB) | 212 ------------------------------------------------- 213 |GD, BD | 0xFFFC8000 (4KB) | 214 ------------------------------------------------- 215 |ENV | 0xFFFC9000 (8KB) | 216 ------------------------------------------------- 217 |HEAP | 0xFFFCB000 (50KB) | 218 ------------------------------------------------- 219 |STACK | 0xFFFD8000 (22KB) | 220 ------------------------------------------------- 221 |U-Boot SPL | 0xFFFD8000 (160KB) | 222 ------------------------------------------------- 223 224 NAND Flash memory Map on T2080RDB 225 -------------------------------------------------------------- 226 Start End Definition Size 227 0x000000 0x0FFFFF U-Boot img 1MB (2 blocks) 228 0x100000 0x17FFFF U-Boot env 512KB (1 block) 229 0x180000 0x1FFFFF FMAN ucode 512KB (1 block) 230 0x200000 0x27FFFF CS4315 ucode 512KB (1 block) 231 232 233 Micro SD Card memory Map on T2080RDB 234 ---------------------------------------------------- 235 Block #blocks Definition Size 236 0x008 2048 U-Boot img 1MB 237 0x800 0016 U-Boot env 8KB 238 0x820 0128 FMAN ucode 64KB 239 0x8a0 0512 CS4315 ucode 256KB 240 241 242 SPI Flash memory Map on T2080RDB 243 ---------------------------------------------------- 244 Start End Definition Size 245 0x000000 0x0FFFFF U-Boot img 1MB 246 0x100000 0x101FFF U-Boot env 8KB 247 0x110000 0x11FFFF FMAN ucode 64KB 248 0x120000 0x15FFFF CS4315 ucode 256KB 249 250 251 How to update the ucode of Cortina CS4315/CS4340 10G PHY 252 -------------------------------------------------------- 253 => tftp 1000000 CS4315-CS4340-PHY-ucode.txt 254 => pro off all;era 0xefe00000 0xefefffff;cp.b 1000000 0xefe00000 $filesize 255 256 257 How to update the ucode of Freescale FMAN 258 ----------------------------------------- 259 => tftp 1000000 fsl_fman_ucode_t2080_r1.0.bin 260 => pro off all;erase 0xeff00000 0xeff1ffff;cp 1000000 0xeff00000 $filesize 261 262 263 For more details, please refer to T2080PCIe-RDB User Guide and access 264 website www.freescale.com and Freescale QorIQ SDK Infocenter document. 265
