1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Copyright (C) 2013 Gateworks Corporation 4 * 5 * Author: Tim Harvey <tharvey (at) gateworks.com> 6 */ 7 8 #include <linux/errno.h> 9 #include <common.h> 10 #include <i2c.h> 11 #include <linux/ctype.h> 12 13 #include "ventana_eeprom.h" 14 #include "gsc.h" 15 16 /* 17 * The Gateworks System Controller will fail to ACK a master transaction if 18 * it is busy, which can occur during its 1HZ timer tick while reading ADC's. 19 * When this does occur, it will never be busy long enough to fail more than 20 * 2 back-to-back transfers. Thus we wrap i2c_read and i2c_write with 21 * 3 retries. 22 */ 23 int gsc_i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len) 24 { 25 int retry = 3; 26 int n = 0; 27 int ret; 28 29 while (n++ < retry) { 30 ret = i2c_read(chip, addr, alen, buf, len); 31 if (!ret) 32 break; 33 debug("%s: 0x%02x 0x%02x retry%d: %d\n", __func__, chip, addr, 34 n, ret); 35 if (ret != -ENODEV) 36 break; 37 mdelay(10); 38 } 39 return ret; 40 } 41 42 int gsc_i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len) 43 { 44 int retry = 3; 45 int n = 0; 46 int ret; 47 48 while (n++ < retry) { 49 ret = i2c_write(chip, addr, alen, buf, len); 50 if (!ret) 51 break; 52 debug("%s: 0x%02x 0x%02x retry%d: %d\n", __func__, chip, addr, 53 n, ret); 54 if (ret != -ENODEV) 55 break; 56 mdelay(10); 57 } 58 mdelay(100); 59 return ret; 60 } 61 62 static void read_hwmon(const char *name, uint reg, uint size) 63 { 64 unsigned char buf[3]; 65 uint ui; 66 67 printf("%-8s:", name); 68 memset(buf, 0, sizeof(buf)); 69 if (gsc_i2c_read(GSC_HWMON_ADDR, reg, 1, buf, size)) { 70 puts("fRD\n"); 71 } else { 72 ui = buf[0] | (buf[1]<<8) | (buf[2]<<16); 73 if (reg == GSC_HWMON_TEMP && ui > 0x8000) 74 ui -= 0xffff; 75 if (ui == 0xffffff) 76 puts("invalid\n"); 77 else 78 printf("%d\n", ui); 79 } 80 } 81 82 int gsc_info(int verbose) 83 { 84 unsigned char buf[16]; 85 86 i2c_set_bus_num(0); 87 if (gsc_i2c_read(GSC_SC_ADDR, 0, 1, buf, 16)) 88 return CMD_RET_FAILURE; 89 90 printf("GSC: v%d", buf[GSC_SC_FWVER]); 91 printf(" 0x%04x", buf[GSC_SC_FWCRC] | buf[GSC_SC_FWCRC+1]<<8); 92 printf(" WDT:%sabled", (buf[GSC_SC_CTRL1] & (1<<GSC_SC_CTRL1_WDEN)) 93 ? "en" : "dis"); 94 if (buf[GSC_SC_STATUS] & (1 << GSC_SC_IRQ_WATCHDOG)) { 95 buf[GSC_SC_STATUS] &= ~(1 << GSC_SC_IRQ_WATCHDOG); 96 puts(" WDT_RESET"); 97 gsc_i2c_write(GSC_SC_ADDR, GSC_SC_STATUS, 1, 98 &buf[GSC_SC_STATUS], 1); 99 } 100 if (!gsc_i2c_read(GSC_HWMON_ADDR, GSC_HWMON_TEMP, 1, buf, 2)) { 101 int ui = buf[0] | buf[1]<<8; 102 if (ui > 0x8000) 103 ui -= 0xffff; 104 printf(" board temp at %dC", ui / 10); 105 } 106 puts("\n"); 107 if (!verbose) 108 return CMD_RET_SUCCESS; 109 110 read_hwmon("Temp", GSC_HWMON_TEMP, 2); 111 read_hwmon("VIN", GSC_HWMON_VIN, 3); 112 read_hwmon("VBATT", GSC_HWMON_VBATT, 3); 113 read_hwmon("VDD_3P3", GSC_HWMON_VDD_3P3, 3); 114 read_hwmon("VDD_ARM", GSC_HWMON_VDD_CORE, 3); 115 read_hwmon("VDD_SOC", GSC_HWMON_VDD_SOC, 3); 116 read_hwmon("VDD_HIGH", GSC_HWMON_VDD_HIGH, 3); 117 read_hwmon("VDD_DDR", GSC_HWMON_VDD_DDR, 3); 118 read_hwmon("VDD_5P0", GSC_HWMON_VDD_5P0, 3); 119 if (strncasecmp((const char*) ventana_info.model, "GW553", 5)) 120 read_hwmon("VDD_2P5", GSC_HWMON_VDD_2P5, 3); 121 read_hwmon("VDD_1P8", GSC_HWMON_VDD_1P8, 3); 122 read_hwmon("VDD_IO2", GSC_HWMON_VDD_IO2, 3); 123 switch (ventana_info.model[3]) { 124 case '1': /* GW51xx */ 125 read_hwmon("VDD_IO3", GSC_HWMON_VDD_IO4, 3); /* -C rev */ 126 break; 127 case '2': /* GW52xx */ 128 break; 129 case '3': /* GW53xx */ 130 read_hwmon("VDD_IO4", GSC_HWMON_VDD_IO4, 3); /* -C rev */ 131 read_hwmon("VDD_GPS", GSC_HWMON_VDD_IO3, 3); 132 break; 133 case '4': /* GW54xx */ 134 read_hwmon("VDD_IO3", GSC_HWMON_VDD_IO4, 3); /* -C rev */ 135 read_hwmon("VDD_GPS", GSC_HWMON_VDD_IO3, 3); 136 break; 137 case '5': /* GW55xx */ 138 break; 139 case '6': /* GW560x */ 140 read_hwmon("VDD_IO4", GSC_HWMON_VDD_IO4, 3); 141 read_hwmon("VDD_GPS", GSC_HWMON_VDD_IO3, 3); 142 break; 143 } 144 return 0; 145 } 146 147 /* 148 * The Gateworks System Controller implements a boot 149 * watchdog (always enabled) as a workaround for IMX6 boot related 150 * errata such as: 151 * ERR005768 - no fix scheduled 152 * ERR006282 - fixed in silicon r1.2 153 * ERR007117 - fixed in silicon r1.3 154 * ERR007220 - fixed in silicon r1.3 155 * ERR007926 - no fix scheduled 156 * see http://cache.freescale.com/files/32bit/doc/errata/IMX6DQCE.pdf 157 * 158 * Disable the boot watchdog 159 */ 160 int gsc_boot_wd_disable(void) 161 { 162 u8 reg; 163 164 i2c_set_bus_num(CONFIG_I2C_GSC); 165 if (!gsc_i2c_read(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) { 166 reg |= (1 << GSC_SC_CTRL1_WDDIS); 167 if (!gsc_i2c_write(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) 168 return 0; 169 } 170 puts("Error: could not disable GSC Watchdog\n"); 171 return 1; 172 } 173 174 #if defined(CONFIG_CMD_GSC) && !defined(CONFIG_SPL_BUILD) 175 static int do_gsc_sleep(cmd_tbl_t *cmdtp, int flag, int argc, 176 char * const argv[]) 177 { 178 unsigned char reg; 179 unsigned long secs = 0; 180 181 if (argc < 2) 182 return CMD_RET_USAGE; 183 184 secs = simple_strtoul(argv[1], NULL, 10); 185 printf("GSC Sleeping for %ld seconds\n", secs); 186 187 i2c_set_bus_num(0); 188 reg = (secs >> 24) & 0xff; 189 if (gsc_i2c_write(GSC_SC_ADDR, 9, 1, ®, 1)) 190 goto error; 191 reg = (secs >> 16) & 0xff; 192 if (gsc_i2c_write(GSC_SC_ADDR, 8, 1, ®, 1)) 193 goto error; 194 reg = (secs >> 8) & 0xff; 195 if (gsc_i2c_write(GSC_SC_ADDR, 7, 1, ®, 1)) 196 goto error; 197 reg = secs & 0xff; 198 if (gsc_i2c_write(GSC_SC_ADDR, 6, 1, ®, 1)) 199 goto error; 200 if (gsc_i2c_read(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) 201 goto error; 202 reg |= (1 << 2); 203 if (gsc_i2c_write(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) 204 goto error; 205 reg &= ~(1 << 2); 206 reg |= 0x3; 207 if (gsc_i2c_write(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) 208 goto error; 209 210 return CMD_RET_SUCCESS; 211 212 error: 213 printf("i2c error\n"); 214 return CMD_RET_FAILURE; 215 } 216 217 static int do_gsc_wd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 218 { 219 unsigned char reg; 220 221 if (argc < 2) 222 return CMD_RET_USAGE; 223 224 if (strcasecmp(argv[1], "enable") == 0) { 225 int timeout = 0; 226 227 if (argc > 2) 228 timeout = simple_strtoul(argv[2], NULL, 10); 229 i2c_set_bus_num(0); 230 if (gsc_i2c_read(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) 231 return CMD_RET_FAILURE; 232 reg &= ~((1 << GSC_SC_CTRL1_WDEN) | (1 << GSC_SC_CTRL1_WDTIME)); 233 if (timeout == 60) 234 reg |= (1 << GSC_SC_CTRL1_WDTIME); 235 else 236 timeout = 30; 237 reg |= (1 << GSC_SC_CTRL1_WDEN); 238 if (gsc_i2c_write(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) 239 return CMD_RET_FAILURE; 240 printf("GSC Watchdog enabled with timeout=%d seconds\n", 241 timeout); 242 } else if (strcasecmp(argv[1], "disable") == 0) { 243 i2c_set_bus_num(0); 244 if (gsc_i2c_read(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) 245 return CMD_RET_FAILURE; 246 reg &= ~((1 << GSC_SC_CTRL1_WDEN) | (1 << GSC_SC_CTRL1_WDTIME)); 247 if (gsc_i2c_write(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) 248 return CMD_RET_FAILURE; 249 printf("GSC Watchdog disabled\n"); 250 } else { 251 return CMD_RET_USAGE; 252 } 253 return CMD_RET_SUCCESS; 254 } 255 256 static int do_gsc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 257 { 258 if (argc < 2) 259 return gsc_info(1); 260 261 if (strcasecmp(argv[1], "wd") == 0) 262 return do_gsc_wd(cmdtp, flag, --argc, ++argv); 263 else if (strcasecmp(argv[1], "sleep") == 0) 264 return do_gsc_sleep(cmdtp, flag, --argc, ++argv); 265 266 return CMD_RET_USAGE; 267 } 268 269 U_BOOT_CMD( 270 gsc, 4, 1, do_gsc, "GSC configuration", 271 "[wd enable [30|60]]|[wd disable]|[sleep <secs>]\n" 272 ); 273 274 #endif /* CONFIG_CMD_GSC */ 275
