Home | History | Annotate | only in /external/u-boot/board/grinn/chiliboard
Up to higher level directory
NameDateSize
board.c22-Oct-20204.9K
Kconfig22-Oct-2020184
MAINTAINERS22-Oct-2020253
Makefile22-Oct-202082
README22-Oct-2020726

README

      1 How to use U-Boot on Grinn's chiliBoard
      2 --------------------------------------
      3 
      4 - Build U-Boot for chiliBoard:
      5 
      6 $ make mrproper
      7 $ make chiliboard_defconfig
      8 $ make
      9 
     10 This will generate the SPL image called MLO and the u-boot.img.
     11 
     12 - Flash the SPL image into the micro SD card:
     13 
     14 sudo dd if=MLO of=/dev/mmcblk0 bs=128k; sync
     15 
     16 - Flash the u-boot.img image into the micro SD card:
     17 
     18 sudo dd if=u-boot.img of=/dev/mmcblk0 bs=128k seek=3; sync
     19 
     20 - Jumper settings:
     21 
     22 S2: 1 1 1 0 1 0
     23 
     24 where 0 means bottom position and 1 means top position (from the
     25 switch label numbers reference).
     26 
     27 - Insert the micro SD card in the board.
     28 
     29 - Connect USB cable between chiliBoard and the PC for the power and console.
     30 
     31 - U-Boot messages should come up.
     32