Home | History | Annotate | Download | only in doc
      1 The spl command is used to export a boot parameter image to RAM. Later
      2 it may implement more functions connected to the SPL.
      3 
      4 SUBCOMMAND EXPORT
      5 To execute the command everything has to be in place as if bootm should be
      6 used. (kernel image, initrd-image, fdt-image etc.)
      7 
      8 export has two subcommands:
      9 	atags: exports the ATAGS
     10 	fdt: exports the FDT
     11 
     12 Call is:
     13 spl export <fdt|atags> [kernel_addr] [initrd_addr] [fdt_addr if fdt]
     14 
     15 
     16 TYPICAL CALL
     17 
     18 on OMAP3:
     19 nandecc hw
     20 nand read 0x82000000 0x280000 0x400000 	/* Read kernel image from NAND*/
     21 spl export atags 			/* export ATAGS */
     22 nand erase 0x680000 0x20000		/* erase - one page */
     23 nand write 0x80000100 0x680000 0x20000	/* write the image - one page */
     24 
     25 call with FDT:
     26 nandecc hw
     27 nand read 0x82000000 0x280000 0x400000 	/* Read kernel image from NAND*/
     28 tftpboot 0x80000100 devkit8000.dtb /* Read fdt */
     29 spl export fdt 0x82000000 - 0x80000100	/* export FDT */
     30 nand erase 0x680000 0x20000		/* erase - one page */
     31 nand write <adress shown by spl export> 0x680000 0x20000
     32