Home | History | Annotate | Download | only in doc
      1 Driver implementing the fuse API for Freescale's IC Identification Module (IIM)
      2 
      3 This IP can be found on the following SoCs:
      4  - MPC512x,
      5  - i.MX25,
      6  - i.MX27,
      7  - i.MX31,
      8  - i.MX35,
      9  - i.MX51,
     10  - i.MX53.
     11 
     12 The section numbers in this file refer to the i.MX25 Reference Manual.
     13 
     14 A fuse word contains 8 fuse bit slots, as explained in 30.4.2.2.1.
     15 
     16 A bank contains 256 fuse word slots, as shown by the memory map in 30.3.1.
     17 
     18 Some fuse bit or word slots may not have the corresponding fuses actually
     19 implemented in the fusebox.
     20 
     21 See the README files of the SoCs using this driver in order to know the
     22 conventions used by U-Boot to store some specific data in the fuses, e.g. MAC
     23 addresses.
     24 
     25 Fuse operations:
     26 
     27    Read
     28       Read operations are implemented as read accesses to the shadow registers,
     29       using "Word y of Bank x" from the register summary in 30.3.2. This is
     30       explained in detail in 30.4.5.1.
     31 
     32    Sense
     33       Sense operations are implemented as explained in 30.4.5.2.
     34 
     35    Program
     36       Program operations are implemented as explained in 30.4.5.3. Following
     37       this operation, the shadow registers are reloaded by the hardware (not
     38       immediately, but this does not make any difference for a user reading
     39       these registers).
     40 
     41    Override
     42       Override operations are implemented as write accesses to the shadow
     43       registers, as explained in 30.4.5.4.
     44 
     45 Configuration:
     46 
     47    CONFIG_FSL_IIM
     48       Define this to enable the fsl_iim driver.
     49