1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Xilinx SPI driver 4 * 5 * Supports 8 bit SPI transfers only, with or w/o FIFO 6 * 7 * Based on bfin_spi.c, by way of altera_spi.c 8 * Copyright (c) 2015 Jagan Teki <jteki (at) openedev.com> 9 * Copyright (c) 2012 Stephan Linz <linz (at) li-pro.net> 10 * Copyright (c) 2010 Graeme Smecher <graeme.smecher (at) mail.mcgill.ca> 11 * Copyright (c) 2010 Thomas Chou <thomas (at) wytron.com.tw> 12 * Copyright (c) 2005-2008 Analog Devices Inc. 13 */ 14 15 #include <config.h> 16 #include <common.h> 17 #include <dm.h> 18 #include <errno.h> 19 #include <malloc.h> 20 #include <spi.h> 21 #include <asm/io.h> 22 23 /* 24 * [0]: http://www.xilinx.com/support/documentation 25 * 26 * Xilinx SPI Register Definitions 27 * [1]: [0]/ip_documentation/xps_spi.pdf 28 * page 8, Register Descriptions 29 * [2]: [0]/ip_documentation/axi_spi_ds742.pdf 30 * page 7, Register Overview Table 31 */ 32 33 /* SPI Control Register (spicr), [1] p9, [2] p8 */ 34 #define SPICR_LSB_FIRST BIT(9) 35 #define SPICR_MASTER_INHIBIT BIT(8) 36 #define SPICR_MANUAL_SS BIT(7) 37 #define SPICR_RXFIFO_RESEST BIT(6) 38 #define SPICR_TXFIFO_RESEST BIT(5) 39 #define SPICR_CPHA BIT(4) 40 #define SPICR_CPOL BIT(3) 41 #define SPICR_MASTER_MODE BIT(2) 42 #define SPICR_SPE BIT(1) 43 #define SPICR_LOOP BIT(0) 44 45 /* SPI Status Register (spisr), [1] p11, [2] p10 */ 46 #define SPISR_SLAVE_MODE_SELECT BIT(5) 47 #define SPISR_MODF BIT(4) 48 #define SPISR_TX_FULL BIT(3) 49 #define SPISR_TX_EMPTY BIT(2) 50 #define SPISR_RX_FULL BIT(1) 51 #define SPISR_RX_EMPTY BIT(0) 52 53 /* SPI Data Transmit Register (spidtr), [1] p12, [2] p12 */ 54 #define SPIDTR_8BIT_MASK GENMASK(7, 0) 55 #define SPIDTR_16BIT_MASK GENMASK(15, 0) 56 #define SPIDTR_32BIT_MASK GENMASK(31, 0) 57 58 /* SPI Data Receive Register (spidrr), [1] p12, [2] p12 */ 59 #define SPIDRR_8BIT_MASK GENMASK(7, 0) 60 #define SPIDRR_16BIT_MASK GENMASK(15, 0) 61 #define SPIDRR_32BIT_MASK GENMASK(31, 0) 62 63 /* SPI Slave Select Register (spissr), [1] p13, [2] p13 */ 64 #define SPISSR_MASK(cs) (1 << (cs)) 65 #define SPISSR_ACT(cs) ~SPISSR_MASK(cs) 66 #define SPISSR_OFF ~0UL 67 68 /* SPI Software Reset Register (ssr) */ 69 #define SPISSR_RESET_VALUE 0x0a 70 71 #define XILSPI_MAX_XFER_BITS 8 72 #define XILSPI_SPICR_DFLT_ON (SPICR_MANUAL_SS | SPICR_MASTER_MODE | \ 73 SPICR_SPE) 74 #define XILSPI_SPICR_DFLT_OFF (SPICR_MASTER_INHIBIT | SPICR_MANUAL_SS) 75 76 #ifndef CONFIG_XILINX_SPI_IDLE_VAL 77 #define CONFIG_XILINX_SPI_IDLE_VAL GENMASK(7, 0) 78 #endif 79 80 #ifndef CONFIG_SYS_XILINX_SPI_LIST 81 #define CONFIG_SYS_XILINX_SPI_LIST { CONFIG_SYS_SPI_BASE } 82 #endif 83 84 /* xilinx spi register set */ 85 struct xilinx_spi_regs { 86 u32 __space0__[7]; 87 u32 dgier; /* Device Global Interrupt Enable Register (DGIER) */ 88 u32 ipisr; /* IP Interrupt Status Register (IPISR) */ 89 u32 __space1__; 90 u32 ipier; /* IP Interrupt Enable Register (IPIER) */ 91 u32 __space2__[5]; 92 u32 srr; /* Softare Reset Register (SRR) */ 93 u32 __space3__[7]; 94 u32 spicr; /* SPI Control Register (SPICR) */ 95 u32 spisr; /* SPI Status Register (SPISR) */ 96 u32 spidtr; /* SPI Data Transmit Register (SPIDTR) */ 97 u32 spidrr; /* SPI Data Receive Register (SPIDRR) */ 98 u32 spissr; /* SPI Slave Select Register (SPISSR) */ 99 u32 spitfor; /* SPI Transmit FIFO Occupancy Register (SPITFOR) */ 100 u32 spirfor; /* SPI Receive FIFO Occupancy Register (SPIRFOR) */ 101 }; 102 103 /* xilinx spi priv */ 104 struct xilinx_spi_priv { 105 struct xilinx_spi_regs *regs; 106 unsigned int freq; 107 unsigned int mode; 108 }; 109 110 static unsigned long xilinx_spi_base_list[] = CONFIG_SYS_XILINX_SPI_LIST; 111 static int xilinx_spi_probe(struct udevice *bus) 112 { 113 struct xilinx_spi_priv *priv = dev_get_priv(bus); 114 struct xilinx_spi_regs *regs = priv->regs; 115 116 priv->regs = (struct xilinx_spi_regs *)xilinx_spi_base_list[bus->seq]; 117 118 writel(SPISSR_RESET_VALUE, ®s->srr); 119 120 return 0; 121 } 122 123 static void spi_cs_activate(struct udevice *dev, uint cs) 124 { 125 struct udevice *bus = dev_get_parent(dev); 126 struct xilinx_spi_priv *priv = dev_get_priv(bus); 127 struct xilinx_spi_regs *regs = priv->regs; 128 129 writel(SPISSR_ACT(cs), ®s->spissr); 130 } 131 132 static void spi_cs_deactivate(struct udevice *dev) 133 { 134 struct udevice *bus = dev_get_parent(dev); 135 struct xilinx_spi_priv *priv = dev_get_priv(bus); 136 struct xilinx_spi_regs *regs = priv->regs; 137 138 writel(SPISSR_OFF, ®s->spissr); 139 } 140 141 static int xilinx_spi_claim_bus(struct udevice *dev) 142 { 143 struct udevice *bus = dev_get_parent(dev); 144 struct xilinx_spi_priv *priv = dev_get_priv(bus); 145 struct xilinx_spi_regs *regs = priv->regs; 146 147 writel(SPISSR_OFF, ®s->spissr); 148 writel(XILSPI_SPICR_DFLT_ON, ®s->spicr); 149 150 return 0; 151 } 152 153 static int xilinx_spi_release_bus(struct udevice *dev) 154 { 155 struct udevice *bus = dev_get_parent(dev); 156 struct xilinx_spi_priv *priv = dev_get_priv(bus); 157 struct xilinx_spi_regs *regs = priv->regs; 158 159 writel(SPISSR_OFF, ®s->spissr); 160 writel(XILSPI_SPICR_DFLT_OFF, ®s->spicr); 161 162 return 0; 163 } 164 165 static int xilinx_spi_xfer(struct udevice *dev, unsigned int bitlen, 166 const void *dout, void *din, unsigned long flags) 167 { 168 struct udevice *bus = dev_get_parent(dev); 169 struct xilinx_spi_priv *priv = dev_get_priv(bus); 170 struct xilinx_spi_regs *regs = priv->regs; 171 struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev); 172 /* assume spi core configured to do 8 bit transfers */ 173 unsigned int bytes = bitlen / XILSPI_MAX_XFER_BITS; 174 const unsigned char *txp = dout; 175 unsigned char *rxp = din; 176 unsigned rxecount = 17; /* max. 16 elements in FIFO, leftover 1 */ 177 unsigned global_timeout; 178 179 debug("spi_xfer: bus:%i cs:%i bitlen:%i bytes:%i flags:%lx\n", 180 bus->seq, slave_plat->cs, bitlen, bytes, flags); 181 182 if (bitlen == 0) 183 goto done; 184 185 if (bitlen % XILSPI_MAX_XFER_BITS) { 186 printf("XILSPI warning: Not a multiple of %d bits\n", 187 XILSPI_MAX_XFER_BITS); 188 flags |= SPI_XFER_END; 189 goto done; 190 } 191 192 /* empty read buffer */ 193 while (rxecount && !(readl(®s->spisr) & SPISR_RX_EMPTY)) { 194 readl(®s->spidrr); 195 rxecount--; 196 } 197 198 if (!rxecount) { 199 printf("XILSPI error: Rx buffer not empty\n"); 200 return -1; 201 } 202 203 if (flags & SPI_XFER_BEGIN) 204 spi_cs_activate(dev, slave_plat->cs); 205 206 /* at least 1usec or greater, leftover 1 */ 207 global_timeout = priv->freq > XILSPI_MAX_XFER_BITS * 1000000 ? 2 : 208 (XILSPI_MAX_XFER_BITS * 1000000 / priv->freq) + 1; 209 210 while (bytes--) { 211 unsigned timeout = global_timeout; 212 /* get Tx element from data out buffer and count up */ 213 unsigned char d = txp ? *txp++ : CONFIG_XILINX_SPI_IDLE_VAL; 214 debug("spi_xfer: tx:%x ", d); 215 216 /* write out and wait for processing (receive data) */ 217 writel(d & SPIDTR_8BIT_MASK, ®s->spidtr); 218 while (timeout && readl(®s->spisr) 219 & SPISR_RX_EMPTY) { 220 timeout--; 221 udelay(1); 222 } 223 224 if (!timeout) { 225 printf("XILSPI error: Xfer timeout\n"); 226 return -1; 227 } 228 229 /* read Rx element and push into data in buffer */ 230 d = readl(®s->spidrr) & SPIDRR_8BIT_MASK; 231 if (rxp) 232 *rxp++ = d; 233 debug("spi_xfer: rx:%x\n", d); 234 } 235 236 done: 237 if (flags & SPI_XFER_END) 238 spi_cs_deactivate(dev); 239 240 return 0; 241 } 242 243 static int xilinx_spi_set_speed(struct udevice *bus, uint speed) 244 { 245 struct xilinx_spi_priv *priv = dev_get_priv(bus); 246 247 priv->freq = speed; 248 249 debug("xilinx_spi_set_speed: regs=%p, speed=%d\n", priv->regs, 250 priv->freq); 251 252 return 0; 253 } 254 255 static int xilinx_spi_set_mode(struct udevice *bus, uint mode) 256 { 257 struct xilinx_spi_priv *priv = dev_get_priv(bus); 258 struct xilinx_spi_regs *regs = priv->regs; 259 uint32_t spicr; 260 261 spicr = readl(®s->spicr); 262 if (mode & SPI_LSB_FIRST) 263 spicr |= SPICR_LSB_FIRST; 264 if (mode & SPI_CPHA) 265 spicr |= SPICR_CPHA; 266 if (mode & SPI_CPOL) 267 spicr |= SPICR_CPOL; 268 if (mode & SPI_LOOP) 269 spicr |= SPICR_LOOP; 270 271 writel(spicr, ®s->spicr); 272 priv->mode = mode; 273 274 debug("xilinx_spi_set_mode: regs=%p, mode=%d\n", priv->regs, 275 priv->mode); 276 277 return 0; 278 } 279 280 static const struct dm_spi_ops xilinx_spi_ops = { 281 .claim_bus = xilinx_spi_claim_bus, 282 .release_bus = xilinx_spi_release_bus, 283 .xfer = xilinx_spi_xfer, 284 .set_speed = xilinx_spi_set_speed, 285 .set_mode = xilinx_spi_set_mode, 286 }; 287 288 static const struct udevice_id xilinx_spi_ids[] = { 289 { .compatible = "xlnx,xps-spi-2.00.a" }, 290 { .compatible = "xlnx,xps-spi-2.00.b" }, 291 { } 292 }; 293 294 U_BOOT_DRIVER(xilinx_spi) = { 295 .name = "xilinx_spi", 296 .id = UCLASS_SPI, 297 .of_match = xilinx_spi_ids, 298 .ops = &xilinx_spi_ops, 299 .priv_auto_alloc_size = sizeof(struct xilinx_spi_priv), 300 .probe = xilinx_spi_probe, 301 }; 302
