1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * (C) 2015 Hans de Goede <hdegoede (at) redhat.com> 4 */ 5 6 /* 7 * Support for the ANX9804 bridge chip, which can take pixel data coming 8 * from a parallel LCD interface and translate it on the flight into a DP 9 * interface for driving eDP TFT displays. 10 */ 11 12 #include <common.h> 13 #include <i2c.h> 14 #include "anx98xx-edp.h" 15 #include "anx9804.h" 16 17 /** 18 * anx9804_init() - Init anx9804 parallel lcd to edp bridge chip 19 * 20 * This function will init an anx9804 parallel lcd to dp bridge chip 21 * using the passed in parameters. 22 * 23 * @i2c_bus: Number of the i2c bus to which the anx9804 is connected. 24 * @lanes: Number of displayport lanes to use 25 * @data_rate: Register value for the bandwidth reg 0x06: 1.62G, 0x0a: 2.7G 26 * @bpp: Bits per pixel, must be 18 or 24 27 */ 28 void anx9804_init(unsigned int i2c_bus, u8 lanes, u8 data_rate, int bpp) 29 { 30 unsigned int orig_i2c_bus = i2c_get_bus_num(); 31 u8 c, colordepth; 32 int i; 33 34 i2c_set_bus_num(i2c_bus); 35 36 if (bpp == 18) 37 colordepth = 0x00; /* 6 bit */ 38 else 39 colordepth = 0x10; /* 8 bit */ 40 41 /* Reset */ 42 i2c_reg_write(0x39, ANX9804_RST_CTRL_REG, 1); 43 mdelay(100); 44 i2c_reg_write(0x39, ANX9804_RST_CTRL_REG, 0); 45 46 /* Write 0 to the powerdown reg (powerup everything) */ 47 i2c_reg_write(0x39, ANX9804_POWERD_CTRL_REG, 0); 48 49 c = i2c_reg_read(0x39, ANX9804_DEV_IDH_REG); 50 if (c != 0x98) { 51 printf("Error anx9804 chipid mismatch\n"); 52 i2c_set_bus_num(orig_i2c_bus); 53 return; 54 } 55 56 for (i = 0; i < 100; i++) { 57 c = i2c_reg_read(0x38, ANX9804_SYS_CTRL2_REG); 58 i2c_reg_write(0x38, ANX9804_SYS_CTRL2_REG, c); 59 c = i2c_reg_read(0x38, ANX9804_SYS_CTRL2_REG); 60 if ((c & ANX9804_SYS_CTRL2_CHA_STA) == 0) 61 break; 62 63 mdelay(5); 64 } 65 if (i == 100) 66 printf("Error anx9804 clock is not stable\n"); 67 68 i2c_reg_write(0x39, ANX9804_VID_CTRL2_REG, colordepth); 69 70 /* Set a bunch of analog related register values */ 71 i2c_reg_write(0x38, ANX9804_PLL_CTRL_REG, 0x07); 72 i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL3, 0x19); 73 i2c_reg_write(0x39, ANX9804_PLL_CTRL3, 0xd9); 74 i2c_reg_write(0x39, ANX9804_RST_CTRL2_REG, ANX9804_RST_CTRL2_AC_MODE); 75 i2c_reg_write(0x39, ANX9804_ANALOG_DEBUG_REG1, 0xf0); 76 i2c_reg_write(0x39, ANX9804_ANALOG_DEBUG_REG3, 0x99); 77 i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL1, 0x7b); 78 i2c_reg_write(0x38, ANX9804_LINK_DEBUG_REG, 0x30); 79 i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL, 0x06); 80 81 /* Force HPD */ 82 i2c_reg_write(0x38, ANX9804_SYS_CTRL3_REG, 83 ANX9804_SYS_CTRL3_F_HPD | ANX9804_SYS_CTRL3_HPD_CTRL); 84 85 /* Power up and configure lanes */ 86 i2c_reg_write(0x38, ANX9804_ANALOG_POWER_DOWN_REG, 0x00); 87 i2c_reg_write(0x38, ANX9804_TRAINING_LANE0_SET_REG, 0x00); 88 i2c_reg_write(0x38, ANX9804_TRAINING_LANE1_SET_REG, 0x00); 89 i2c_reg_write(0x38, ANX9804_TRAINING_LANE2_SET_REG, 0x00); 90 i2c_reg_write(0x38, ANX9804_TRAINING_LANE3_SET_REG, 0x00); 91 92 /* Reset AUX CH */ 93 i2c_reg_write(0x39, ANX9804_RST_CTRL2_REG, 94 ANX9804_RST_CTRL2_AC_MODE | ANX9804_RST_CTRL2_AUX); 95 i2c_reg_write(0x39, ANX9804_RST_CTRL2_REG, 96 ANX9804_RST_CTRL2_AC_MODE); 97 98 /* Powerdown audio and some other unused bits */ 99 i2c_reg_write(0x39, ANX9804_POWERD_CTRL_REG, ANX9804_POWERD_AUDIO); 100 i2c_reg_write(0x38, ANX9804_HDCP_CONTROL_0_REG, 0x00); 101 i2c_reg_write(0x38, 0xa7, 0x00); 102 103 /* Set data-rate / lanes */ 104 i2c_reg_write(0x38, ANX9804_LINK_BW_SET_REG, data_rate); 105 i2c_reg_write(0x38, ANX9804_LANE_COUNT_SET_REG, lanes); 106 107 /* Link training */ 108 i2c_reg_write(0x38, ANX9804_LINK_TRAINING_CTRL_REG, 109 ANX9804_LINK_TRAINING_CTRL_EN); 110 mdelay(5); 111 for (i = 0; i < 100; i++) { 112 c = i2c_reg_read(0x38, ANX9804_LINK_TRAINING_CTRL_REG); 113 if ((c & 0x01) == 0) 114 break; 115 116 mdelay(5); 117 } 118 if(i == 100) { 119 printf("Error anx9804 link training timeout\n"); 120 i2c_set_bus_num(orig_i2c_bus); 121 return; 122 } 123 124 /* Enable */ 125 i2c_reg_write(0x39, ANX9804_VID_CTRL1_REG, 126 ANX9804_VID_CTRL1_VID_EN | ANX9804_VID_CTRL1_EDGE); 127 /* Force stream valid */ 128 i2c_reg_write(0x38, ANX9804_SYS_CTRL3_REG, 129 ANX9804_SYS_CTRL3_F_HPD | ANX9804_SYS_CTRL3_HPD_CTRL | 130 ANX9804_SYS_CTRL3_F_VALID | ANX9804_SYS_CTRL3_VALID_CTRL); 131 132 i2c_set_bus_num(orig_i2c_bus); 133 } 134
