1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Configuation settings for the Motorola MC5275EVB board. 4 * 5 * By Arthur Shipkowski <art (at) videon-central.com> 6 * Copyright (C) 2005 Videon Central, Inc. 7 * 8 * Based off of M5272C3 board code by Josef Baumgartner 9 * <josef.baumgartner (at) telex.de> 10 */ 11 12 /* 13 * board/config.h - configuration options, board specific 14 */ 15 16 #ifndef _M5275EVB_H 17 #define _M5275EVB_H 18 19 /* 20 * High Level Configuration Options 21 * (easy to change) 22 */ 23 24 #define CONFIG_MCFTMR 25 26 #define CONFIG_MCFUART 27 #define CONFIG_SYS_UART_PORT (0) 28 29 /* Configuration for environment 30 * Environment is embedded in u-boot in the second sector of the flash 31 */ 32 #ifndef CONFIG_MONITOR_IS_IN_RAM 33 #define CONFIG_ENV_OFFSET 0x4000 34 #define CONFIG_ENV_SECT_SIZE 0x2000 35 #else 36 #define CONFIG_ENV_ADDR 0xffe04000 37 #define CONFIG_ENV_SECT_SIZE 0x2000 38 #endif 39 40 #define LDS_BOARD_TEXT \ 41 . = DEFINED(env_offset) ? env_offset : .; \ 42 env/embedded.o(.text); 43 44 /* 45 * BOOTP options 46 */ 47 #define CONFIG_BOOTP_BOOTFILESIZE 48 49 /* Available command configuration */ 50 51 #define CONFIG_MCFFEC 52 #ifdef CONFIG_MCFFEC 53 #define CONFIG_MII 1 54 #define CONFIG_MII_INIT 1 55 #define CONFIG_SYS_DISCOVER_PHY 56 #define CONFIG_SYS_RX_ETH_BUFFER 8 57 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 58 #define CONFIG_SYS_FEC0_PINMUX 0 59 #define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE 60 #define CONFIG_SYS_FEC1_PINMUX 0 61 #define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC1_IOBASE 62 #define MCFFEC_TOUT_LOOP 50000 63 #define CONFIG_HAS_ETH1 64 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ 65 #ifndef CONFIG_SYS_DISCOVER_PHY 66 #define FECDUPLEX FULL 67 #define FECSPEED _100BASET 68 #else 69 #ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN 70 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 71 #endif 72 #endif 73 #endif 74 75 /* I2C */ 76 #define CONFIG_SYS_I2C 77 #define CONFIG_SYS_I2C_FSL 78 #define CONFIG_SYS_FSL_I2C_SPEED 80000 79 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 80 #define CONFIG_SYS_FSL_I2C_OFFSET 0x00000300 81 #define CONFIG_SYS_IMMR CONFIG_SYS_MBAR 82 #define CONFIG_SYS_I2C_PINMUX_REG (gpio_reg->par_feci2c) 83 #define CONFIG_SYS_I2C_PINMUX_CLR (0xFFF0) 84 #define CONFIG_SYS_I2C_PINMUX_SET (0x000F) 85 86 #define CONFIG_SYS_LOAD_ADDR 0x800000 87 88 #define CONFIG_BOOTCOMMAND "bootm ffe40000" 89 #define CONFIG_SYS_MEMTEST_START 0x400 90 #define CONFIG_SYS_MEMTEST_END 0x380000 91 92 #ifdef CONFIG_MCFFEC 93 # define CONFIG_NET_RETRY_COUNT 5 94 # define CONFIG_OVERWRITE_ETHADDR_ONCE 95 #endif /* FEC_ENET */ 96 97 #define CONFIG_EXTRA_ENV_SETTINGS \ 98 "netdev=eth0\0" \ 99 "loadaddr=10000\0" \ 100 "uboot=u-boot.bin\0" \ 101 "load=tftp ${loadaddr} ${uboot}\0" \ 102 "upd=run load; run prog\0" \ 103 "prog=prot off ffe00000 ffe3ffff;" \ 104 "era ffe00000 ffe3ffff;" \ 105 "cp.b ${loadaddr} ffe00000 ${filesize};"\ 106 "save\0" \ 107 "" 108 109 #define CONFIG_SYS_CLK 150000000 110 111 /* 112 * Low Level Configuration Settings 113 * (address mappings, register initial values, etc.) 114 * You should know what you are doing if you make changes here. 115 */ 116 117 #define CONFIG_SYS_MBAR 0x40000000 118 119 /*----------------------------------------------------------------------- 120 * Definitions for initial stack pointer and data area (in DPRAM) 121 */ 122 #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 123 #define CONFIG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ 124 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 125 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 126 127 /*----------------------------------------------------------------------- 128 * Start addresses for the final memory configuration 129 * (Set up by the startup code) 130 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 131 */ 132 #define CONFIG_SYS_SDRAM_BASE 0x00000000 133 #define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ 134 #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE 135 136 #ifdef CONFIG_MONITOR_IS_IN_RAM 137 #define CONFIG_SYS_MONITOR_BASE 0x20000 138 #else 139 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) 140 #endif 141 142 #define CONFIG_SYS_MONITOR_LEN 0x20000 143 #define CONFIG_SYS_MALLOC_LEN (256 << 10) 144 #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 145 146 /* 147 * For booting Linux, the board info and command line data 148 * have to be in the first 8 MB of memory, since this is 149 * the maximum mapped by the Linux kernel during initialization ?? 150 */ 151 #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) 152 #define CONFIG_SYS_BOOTM_LEN (CONFIG_SYS_SDRAM_SIZE << 20) 153 154 /*----------------------------------------------------------------------- 155 * FLASH organization 156 */ 157 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 158 #define CONFIG_SYS_MAX_FLASH_SECT 11 /* max number of sectors on one chip */ 159 #define CONFIG_SYS_FLASH_ERASE_TOUT 1000 160 161 #define CONFIG_SYS_FLASH_CFI 1 162 #define CONFIG_FLASH_CFI_DRIVER 1 163 #define CONFIG_SYS_FLASH_SIZE 0x200000 164 165 /*----------------------------------------------------------------------- 166 * Cache Configuration 167 */ 168 #define CONFIG_SYS_CACHELINE_SIZE 16 169 170 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ 171 CONFIG_SYS_INIT_RAM_SIZE - 8) 172 #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ 173 CONFIG_SYS_INIT_RAM_SIZE - 4) 174 #define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) 175 #define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ 176 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ 177 CF_ACR_EN | CF_ACR_SM_ALL) 178 #define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ 179 CF_CACR_DISD | CF_CACR_INVI | \ 180 CF_CACR_CEIB | CF_CACR_DCM | \ 181 CF_CACR_EUSP) 182 183 /*----------------------------------------------------------------------- 184 * Memory bank definitions 185 */ 186 #define CONFIG_SYS_CS0_BASE 0xffe00000 187 #define CONFIG_SYS_CS0_CTRL 0x00001980 188 #define CONFIG_SYS_CS0_MASK 0x001F0001 189 190 #define CONFIG_SYS_CS1_BASE 0x30000000 191 #define CONFIG_SYS_CS1_CTRL 0x00001900 192 #define CONFIG_SYS_CS1_MASK 0x00070001 193 194 /*----------------------------------------------------------------------- 195 * Port configuration 196 */ 197 #define CONFIG_SYS_FECI2C 0x0FA0 198 199 #endif /* _M5275EVB_H */ 200
