1 /* 2 * Broadcom SDIO/PCMCIA 3 * Software-specific definitions shared between device and host side 4 * 5 * Copyright (C) 1999-2009, Broadcom Corporation 6 * 7 * Unless you and Broadcom execute a separate written software license 8 * agreement governing use of this software, this software is licensed to you 9 * under the terms of the GNU General Public License version 2 (the "GPL"), 10 * available at http://www.broadcom.com/licenses/GPLv2.php, with the 11 * following added to such license: 12 * 13 * As a special exception, the copyright holders of this software give you 14 * permission to link this software with independent modules, and to copy and 15 * distribute the resulting executable under terms of your choice, provided that 16 * you also meet, for each linked independent module, the terms and conditions of 17 * the license of that module. An independent module is a module which is not 18 * derived from this software. The special exception does not apply to any 19 * modifications of the software. 20 * 21 * Notwithstanding the above, under no circumstances may you combine this 22 * software in any way with any other Broadcom software provided under a license 23 * other than the GPL, without Broadcom's express prior written consent. 24 * 25 * $Id: bcmsdpcm.h,v 1.1.2.3 2009/04/09 18:52:06 Exp $ 26 */ 27 28 #ifndef _bcmsdpcm_h_ 29 #define _bcmsdpcm_h_ 30 31 /* 32 * Software allocation of To SB Mailbox resources 33 */ 34 35 /* intstatus bits */ 36 #define I_SMB_NAK I_SMB_SW0 /* To SB Mailbox Frame NAK */ 37 #define I_SMB_INT_ACK I_SMB_SW1 /* To SB Mailbox Host Interrupt ACK */ 38 #define I_SMB_USE_OOB I_SMB_SW2 /* To SB Mailbox Use OOB Wakeup */ 39 #define I_SMB_DEV_INT I_SMB_SW3 /* To SB Mailbox Miscellaneous Interrupt */ 40 41 /* tosbmailbox bits corresponding to intstatus bits */ 42 #define SMB_NAK (1 << 0) /* To SB Mailbox Frame NAK */ 43 #define SMB_INT_ACK (1 << 1) /* To SB Mailbox Host Interrupt ACK */ 44 #define SMB_USE_OOB (1 << 2) /* To SB Mailbox Use OOB Wakeup */ 45 #define SMB_DEV_INT (1 << 3) /* To SB Mailbox Miscellaneous Interrupt */ 46 #define SMB_MASK 0x0000000f /* To SB Mailbox Mask */ 47 48 /* tosbmailboxdata */ 49 #define SMB_DATA_VERSION_MASK 0x00ff0000 /* host protocol version (sent with F2 enable) */ 50 #define SMB_DATA_VERSION_SHIFT 16 /* host protocol version (sent with F2 enable) */ 51 52 /* 53 * Software allocation of To Host Mailbox resources 54 */ 55 56 /* intstatus bits */ 57 #define I_HMB_FC_STATE I_HMB_SW0 /* To Host Mailbox Flow Control State */ 58 #define I_HMB_FC_CHANGE I_HMB_SW1 /* To Host Mailbox Flow Control State Changed */ 59 #define I_HMB_FRAME_IND I_HMB_SW2 /* To Host Mailbox Frame Indication */ 60 #define I_HMB_HOST_INT I_HMB_SW3 /* To Host Mailbox Miscellaneous Interrupt */ 61 62 /* tohostmailbox bits corresponding to intstatus bits */ 63 #define HMB_FC_ON (1 << 0) /* To Host Mailbox Flow Control State */ 64 #define HMB_FC_CHANGE (1 << 1) /* To Host Mailbox Flow Control State Changed */ 65 #define HMB_FRAME_IND (1 << 2) /* To Host Mailbox Frame Indication */ 66 #define HMB_HOST_INT (1 << 3) /* To Host Mailbox Miscellaneous Interrupt */ 67 #define HMB_MASK 0x0000000f /* To Host Mailbox Mask */ 68 69 /* tohostmailboxdata */ 70 #define HMB_DATA_NAKHANDLED 1 /* we're ready to retransmit NAK'd frame to host */ 71 #define HMB_DATA_DEVREADY 2 /* we're ready to to talk to host after enable */ 72 #define HMB_DATA_FC 4 /* per prio flowcontrol update flag to host */ 73 #define HMB_DATA_FWREADY 8 /* firmware is ready for protocol activity */ 74 75 #define HMB_DATA_FCDATA_MASK 0xff000000 /* per prio flowcontrol data */ 76 #define HMB_DATA_FCDATA_SHIFT 24 /* per prio flowcontrol data */ 77 78 #define HMB_DATA_VERSION_MASK 0x00ff0000 /* device protocol version (with devready) */ 79 #define HMB_DATA_VERSION_SHIFT 16 /* device protocol version (with devready) */ 80 81 /* 82 * Software-defined protocol header 83 */ 84 85 /* Current protocol version */ 86 #define SDPCM_PROT_VERSION 4 87 88 /* SW frame header */ 89 #define SDPCM_SEQUENCE_MASK 0x000000ff /* Sequence Number Mask */ 90 #define SDPCM_PACKET_SEQUENCE(p) (((uint8 *)p)[0] & 0xff) /* p starts w/SW Header */ 91 92 #define SDPCM_CHANNEL_MASK 0x00000f00 /* Channel Number Mask */ 93 #define SDPCM_CHANNEL_SHIFT 8 /* Channel Number Shift */ 94 #define SDPCM_PACKET_CHANNEL(p) (((uint8 *)p)[1] & 0x0f) /* p starts w/SW Header */ 95 96 #define SDPCM_FLAGS_MASK 0x0000f000 /* Mask of flag bits */ 97 #define SDPCM_FLAGS_SHIFT 12 /* Flag bits shift */ 98 #define SDPCM_PACKET_FLAGS(p) ((((uint8 *)p)[1] & 0xf0) >> 4) /* p starts w/SW Header */ 99 100 /* Next Read Len: lookahead length of next frame, in 16-byte units (rounded up) */ 101 #define SDPCM_NEXTLEN_MASK 0x00ff0000 /* Next Read Len Mask */ 102 #define SDPCM_NEXTLEN_SHIFT 16 /* Next Read Len Shift */ 103 #define SDPCM_NEXTLEN_VALUE(p) ((((uint8 *)p)[2] & 0xff) << 4) /* p starts w/SW Header */ 104 #define SDPCM_NEXTLEN_OFFSET 2 105 106 /* Data Offset from SOF (HW Tag, SW Tag, Pad) */ 107 #define SDPCM_DOFFSET_OFFSET 3 /* Data Offset */ 108 #define SDPCM_DOFFSET_VALUE(p) (((uint8 *)p)[SDPCM_DOFFSET_OFFSET] & 0xff) 109 #define SDPCM_DOFFSET_MASK 0xff000000 110 #define SDPCM_DOFFSET_SHIFT 24 111 112 #define SDPCM_FCMASK_OFFSET 4 /* Flow control */ 113 #define SDPCM_FCMASK_VALUE(p) (((uint8 *)p)[SDPCM_FCMASK_OFFSET ] & 0xff) 114 #define SDPCM_WINDOW_OFFSET 5 /* Credit based fc */ 115 #define SDPCM_WINDOW_VALUE(p) (((uint8 *)p)[SDPCM_WINDOW_OFFSET] & 0xff) 116 #define SDPCM_VERSION_OFFSET 6 /* Version # */ 117 #define SDPCM_VERSION_VALUE(p) (((uint8 *)p)[SDPCM_VERSION_OFFSET] & 0xff) 118 #define SDPCM_UNUSED_OFFSET 7 /* Spare */ 119 #define SDPCM_UNUSED_VALUE(p) (((uint8 *)p)[SDPCM_UNUSED_OFFSET] & 0xff) 120 121 #define SDPCM_SWHEADER_LEN 8 /* SW header is 64 bits */ 122 123 /* logical channel numbers */ 124 #define SDPCM_CONTROL_CHANNEL 0 /* Control Request/Response Channel Id */ 125 #define SDPCM_EVENT_CHANNEL 1 /* Asyc Event Indication Channel Id */ 126 #define SDPCM_DATA_CHANNEL 2 /* Data Xmit/Recv Channel Id */ 127 #define SDPCM_GLOM_CHANNEL 3 /* For coalesced packets (superframes) */ 128 #define SDPCM_TEST_CHANNEL 15 /* Reserved for test/debug packets */ 129 #define SDPCM_MAX_CHANNEL 15 130 131 #define SDPCM_SEQUENCE_WRAP 256 /* wrap-around val for eight-bit frame seq number */ 132 133 #define SDPCM_FLAG_RESVD0 0x01 134 #define SDPCM_FLAG_RESVD1 0x02 135 #define SDPCM_FLAG_GSPI_TXENAB 0x04 136 #define SDPCM_FLAG_GLOMDESC 0x08 /* Superframe descriptor mask */ 137 138 /* For GLOM_CHANNEL frames, use a flag to indicate descriptor frame */ 139 #define SDPCM_GLOMDESC_FLAG (SDPCM_FLAG_GLOMDESC << SDPCM_FLAGS_SHIFT) 140 141 #define SDPCM_GLOMDESC(p) (((uint8 *)p)[1] & 0x80) 142 143 /* For TEST_CHANNEL packets, define another 4-byte header */ 144 #define SDPCM_TEST_HDRLEN 4 /* Generally: Cmd(1), Ext(1), Len(2); 145 * Semantics of Ext byte depend on command. 146 * Len is current or requested frame length, not 147 * including test header; sent little-endian. 148 */ 149 #define SDPCM_TEST_DISCARD 0x01 /* Receiver discards. Ext is a pattern id. */ 150 #define SDPCM_TEST_ECHOREQ 0x02 /* Echo request. Ext is a pattern id. */ 151 #define SDPCM_TEST_ECHORSP 0x03 /* Echo response. Ext is a pattern id. */ 152 #define SDPCM_TEST_BURST 0x04 /* Receiver to send a burst. Ext is a frame count */ 153 #define SDPCM_TEST_SEND 0x05 /* Receiver sets send mode. Ext is boolean on/off */ 154 155 /* Handy macro for filling in datagen packets with a pattern */ 156 #define SDPCM_TEST_FILL(byteno, id) ((uint8)(id + byteno)) 157 158 /* 159 * Software counters (first part matches hardware counters) 160 */ 161 162 typedef volatile struct { 163 uint32 cmd52rd; /* Cmd52RdCount, SDIO: cmd52 reads */ 164 uint32 cmd52wr; /* Cmd52WrCount, SDIO: cmd52 writes */ 165 uint32 cmd53rd; /* Cmd53RdCount, SDIO: cmd53 reads */ 166 uint32 cmd53wr; /* Cmd53WrCount, SDIO: cmd53 writes */ 167 uint32 abort; /* AbortCount, SDIO: aborts */ 168 uint32 datacrcerror; /* DataCrcErrorCount, SDIO: frames w/CRC error */ 169 uint32 rdoutofsync; /* RdOutOfSyncCount, SDIO/PCMCIA: Rd Frm out of sync */ 170 uint32 wroutofsync; /* RdOutOfSyncCount, SDIO/PCMCIA: Wr Frm out of sync */ 171 uint32 writebusy; /* WriteBusyCount, SDIO: device asserted "busy" */ 172 uint32 readwait; /* ReadWaitCount, SDIO: no data ready for a read cmd */ 173 uint32 readterm; /* ReadTermCount, SDIO: read frame termination cmds */ 174 uint32 writeterm; /* WriteTermCount, SDIO: write frames termination cmds */ 175 uint32 rxdescuflo; /* receive descriptor underflows */ 176 uint32 rxfifooflo; /* receive fifo overflows */ 177 uint32 txfifouflo; /* transmit fifo underflows */ 178 uint32 runt; /* runt (too short) frames recv'd from bus */ 179 uint32 badlen; /* frame's rxh len does not match its hw tag len */ 180 uint32 badcksum; /* frame's hw tag chksum doesn't agree with len value */ 181 uint32 seqbreak; /* break in sequence # space from one rx frame to the next */ 182 uint32 rxfcrc; /* frame rx header indicates crc error */ 183 uint32 rxfwoos; /* frame rx header indicates write out of sync */ 184 uint32 rxfwft; /* frame rx header indicates write frame termination */ 185 uint32 rxfabort; /* frame rx header indicates frame aborted */ 186 uint32 woosint; /* write out of sync interrupt */ 187 uint32 roosint; /* read out of sync interrupt */ 188 uint32 rftermint; /* read frame terminate interrupt */ 189 uint32 wftermint; /* write frame terminate interrupt */ 190 } sdpcmd_cnt_t; 191 192 /* 193 * Register Access Macros 194 */ 195 196 #define SDIODREV_IS(var, val) ((var) == (val)) 197 #define SDIODREV_GE(var, val) ((var) >= (val)) 198 #define SDIODREV_GT(var, val) ((var) > (val)) 199 #define SDIODREV_LT(var, val) ((var) < (val)) 200 #define SDIODREV_LE(var, val) ((var) <= (val)) 201 202 #define SDIODDMAREG32(h, dir, chnl) \ 203 ((dir) == DMA_TX ? \ 204 (void *)(uintptr)&((h)->regs->dma.sdiod32.dma32regs[chnl].xmt) : \ 205 (void *)(uintptr)&((h)->regs->dma.sdiod32.dma32regs[chnl].rcv)) 206 207 #define SDIODDMAREG64(h, dir, chnl) \ 208 ((dir) == DMA_TX ? \ 209 (void *)(uintptr)&((h)->regs->dma.sdiod64.dma64regs[chnl].xmt) : \ 210 (void *)(uintptr)&((h)->regs->dma.sdiod64.dma64regs[chnl].rcv)) 211 212 #define SDIODDMAREG(h, dir, chnl) \ 213 (SDIODREV_LT((h)->corerev, 1) ? \ 214 SDIODDMAREG32((h), (dir), (chnl)) : \ 215 SDIODDMAREG64((h), (dir), (chnl))) 216 217 #define PCMDDMAREG(h, dir, chnl) \ 218 ((dir) == DMA_TX ? \ 219 (void *)(uintptr)&((h)->regs->dma.pcm32.dmaregs.xmt) : \ 220 (void *)(uintptr)&((h)->regs->dma.pcm32.dmaregs.rcv)) 221 222 #define SDPCMDMAREG(h, dir, chnl, coreid) \ 223 ((coreid) == SDIOD_CORE_ID ? \ 224 SDIODDMAREG(h, dir, chnl) : \ 225 PCMDDMAREG(h, dir, chnl)) 226 227 #define SDIODFIFOREG(h, corerev) \ 228 (SDIODREV_LT((corerev), 1) ? \ 229 ((dma32diag_t *)(uintptr)&((h)->regs->dma.sdiod32.dmafifo)) : \ 230 ((dma32diag_t *)(uintptr)&((h)->regs->dma.sdiod64.dmafifo))) 231 232 #define PCMDFIFOREG(h) \ 233 ((dma32diag_t *)(uintptr)&((h)->regs->dma.pcm32.dmafifo)) 234 235 #define SDPCMFIFOREG(h, coreid, corerev) \ 236 ((coreid) == SDIOD_CORE_ID ? \ 237 SDIODFIFOREG(h, corerev) : \ 238 PCMDFIFOREG(h)) 239 240 /* 241 * Shared structure between dongle and the host 242 * The structure contains pointers to trap or assert information shared with the host 243 */ 244 #define SDPCM_SHARED_VERSION 0x0001 245 #define SDPCM_SHARED_VERSION_MASK 0x00FF 246 #define SDPCM_SHARED_ASSERT_BUILT 0x0100 247 #define SDPCM_SHARED_ASSERT 0x0200 248 #define SDPCM_SHARED_TRAP 0x0400 249 250 typedef struct { 251 uint32 flags; 252 uint32 trap_addr; 253 uint32 assert_exp_addr; 254 uint32 assert_file_addr; 255 uint32 assert_line; 256 uint32 console_addr; /* Address of hndrte_cons_t */ 257 uint32 msgtrace_addr; 258 } sdpcm_shared_t; 259 260 extern sdpcm_shared_t sdpcm_shared; 261 262 #endif /* _bcmsdpcm_h_ */ 263
