/hardware/broadcom/wlan/bcm4329/src/bcmsdio/sys/ |
bcmsdspi.c | 97 sd_err(("sdioh_attach: out of memory, malloced %d bytes\n", MALLOCED(osh))); 104 sd_err(("%s: spi_osinit() failed\n", __FUNCTION__)); 125 sd_err(("%s: spi_hw_attach() failed\n", __FUNCTION__)); 133 sd_err(("%s:sdspi_driver_init() failed()\n", __FUNCTION__)); 142 sd_err(("%s: spi_register_irq() failed for irq = %d\n", __FUNCTION__, irq)); 395 sd_err(("set clock failed!\n")); 452 sd_err(("Failed changing highspeed mode to %d.\n", sd_hiok)); 475 sd_err(("IOV_HOSTREG unsupported\n")); 554 sd_err(("%s: regread failed: Can't read CIS\n", __FUNCTION__)); 591 sd_err(("%s: rsp5 flags is 0x%x func=%d\n" [all...] |
bcmsdh_sdmmc.c | 113 sd_err(("bcmsdh_sdmmc: Failed to enable F1 Err: 0x%08x", err_ret)); 131 sd_err(("%s: SDIO Device not present\n", __FUNCTION__)); 136 sd_err(("sdioh_attach: out of memory, malloced %d bytes\n", MALLOCED(osh))); 142 sd_err(("%s:sdioh_sdmmc_osinit() failed\n", __FUNCTION__)); 160 sd_err(("bcmsdh_sdmmc: Failed to set F1 blocksize\n")); 173 sd_err(("bcmsdh_sdmmc: Failed to set F2 blocksize to %d\n", 226 sd_err(("%s: error for read SDIO_CCCR_IENx : 0x%x\n", __FUNCTION__, err)); 238 sd_err(("%s: error for write SDIO_CCCR_IENx : 0x%x\n", __FUNCTION__, err)); 256 sd_err(("%s: error for read SDIO_CCCR_IENx : 0x%x\n", __FUNCTION__, err)); 269 sd_err(("%s: error for write SDIO_CCCR_IENx : 0x%x\n", __FUNCTION__, err)) [all...] |
bcmsdspi_linux.c | 75 sd_err(("%s: Hey Bogus intr...not even initted: irq %d\n", __FUNCTION__, irq)); 96 sd_err(("%s: request_irq() failed\n", __FUNCTION__)); 162 sd_err(("%s: Card & Host are not initted - bailing\n", __FUNCTION__)); 167 sd_err(("%s: no handler registered, will not enable\n", __FUNCTION__)); 199 sd_err(("%s: Already locked!\n", __FUNCTION__));
|
bcmsdstd.c | 194 sd_err(("sdioh_attach: out of memory, malloced %d bytes\n", MALLOCED(osh))); 201 sd_err(("%s:sdstd_osinit() failed\n", __FUNCTION__)); 209 sd_err(("%s:ioremap() failed\n", __FUNCTION__)); 235 sd_err(("%s:driver_init() failed()\n", __FUNCTION__)); 252 sd_err(("%s: sdstd_register_irq() failed for irq = %d\n", __FUNCTION__, irq)); 550 sd_err(("set clock failed!\n")); 564 sd_err(("set SD Slot power failed!\n")); 567 sd_err(("SD Slot Powered ON.\n")); 574 sd_err(("SD Slot Powered OFF.\n")); 588 sd_err(("sdstd_start_clock failed\n")) [all...] |
bcmspibrcm.c | 100 sd_err(("%s: out of memory, malloced %d bytes\n", __FUNCTION__, MALLOCED(osh))); 106 sd_err(("%s: spi_osinit() failed\n", __FUNCTION__)); 127 sd_err(("%s: spi_hw_attach() failed\n", __FUNCTION__)); 134 sd_err(("%s: bcmspi_driver_init() failed()\n", __FUNCTION__)); 142 sd_err(("%s: spi_register_irq() failed for irq = %d\n", __FUNCTION__, irq)); 159 sd_err(("%s: detaching from hardware\n", __FUNCTION__)); 234 sd_err(("%s: Failed to set dwordmode in gSPI\n", __FUNCTION__)); 250 sd_err(("%s: Failed to set dwordmode in gSPI\n", __FUNCTION__)); 396 sd_err(("%s: set clock failed\n", __FUNCTION__)); 437 sd_err(("%s: Failed changing highspeed mode to %d.\n" [all...] |
bcmpcispi.c | 78 sd_err(("%s: out of memory, malloced %d bytes\n", __FUNCTION__, MALLOCED(osh))); 90 sd_err(("Host controller %d not supported, please upgrade to rev >= 3\n", si->rev)); 95 sd_err(("Attaching to Generic PCI SPI Host Controller Rev %d\n", si->rev)); 113 sd_err(("Mapped PCI Core regs to BAR0 at %p\n", si->pciregs)); 119 sd_err(("Mapped SPI Controller regs to BAR1 at %p\n", si->regs)); 124 sd_err(("Mapped SPI Controller regs to BAR0 at %p\n", si->regs)); 152 sd_err(("%s: no card detected in SD slot\n", __FUNCTION__)); 225 sd_err(("%s: timeout waiting for PLL to lock\n", __FUNCTION__)); 248 sd_err(("%s: divisor %d too large; using max of 2048\n", __FUNCTION__, div)); 265 sd_err(("%s: error switching to external clock\n", __FUNCTION__)) [all...] |
bcmsdstd_linux.c | 65 sd_err(("%s: Hey Bogus intr...not even initted: irq %d\n", __FUNCTION__, irq)); 86 sd_err(("%s: request_irq() failed\n", __FUNCTION__)); 152 sd_err(("%s: Card & Host are not initted - bailing\n", __FUNCTION__)); 157 sd_err(("%s: no handler registered, will not enable\n", __FUNCTION__)); 189 sd_err(("%s: Already locked!\n", __FUNCTION__));
|
bcmsdh_sdmmc_linux.c | 185 sd_err(("%s: no handler registered, will not enable\n", __FUNCTION__));
|
/hardware/broadcom/wlan/bcm4329/src/include/ |
bcmsdh_sdmmc.h | 30 #define sd_err(x) macro
|
bcmsdspi.h | 29 #define sd_err(x) macro
|
bcmspibrcm.h | 17 #define sd_err(x) macro
|
bcmsdstd.h | 29 #define sd_err(x) do { if (sd_msglevel & SDH_ERROR_VAL) printf x; } while (0) macro
|