Home | History | Annotate | Download | only in ssl
      1 /*
      2  * "Default" SSLSocket methods, used by sockets that do neither SSL nor socks.
      3  *
      4  * ***** BEGIN LICENSE BLOCK *****
      5  * Version: MPL 1.1/GPL 2.0/LGPL 2.1
      6  *
      7  * The contents of this file are subject to the Mozilla Public License Version
      8  * 1.1 (the "License"); you may not use this file except in compliance with
      9  * the License. You may obtain a copy of the License at
     10  * http://www.mozilla.org/MPL/
     11  *
     12  * Software distributed under the License is distributed on an "AS IS" basis,
     13  * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
     14  * for the specific language governing rights and limitations under the
     15  * License.
     16  *
     17  * The Original Code is the Netscape security libraries.
     18  *
     19  * The Initial Developer of the Original Code is
     20  * Netscape Communications Corporation.
     21  * Portions created by the Initial Developer are Copyright (C) 1994-2000
     22  * the Initial Developer. All Rights Reserved.
     23  *
     24  * Contributor(s):
     25  *
     26  * Alternatively, the contents of this file may be used under the terms of
     27  * either the GNU General Public License Version 2 or later (the "GPL"), or
     28  * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
     29  * in which case the provisions of the GPL or the LGPL are applicable instead
     30  * of those above. If you wish to allow use of your version of this file only
     31  * under the terms of either the GPL or the LGPL, and not to allow others to
     32  * use your version of this file under the terms of the MPL, indicate your
     33  * decision by deleting the provisions above and replace them with the notice
     34  * and other provisions required by the GPL or the LGPL. If you do not delete
     35  * the provisions above, a recipient may use your version of this file under
     36  * the terms of any one of the MPL, the GPL or the LGPL.
     37  *
     38  * ***** END LICENSE BLOCK ***** */
     39 /* $Id: ssldef.c,v 1.11 2006/04/20 08:46:34 nelson%bolyard.com Exp $ */
     40 
     41 #include "cert.h"
     42 #include "ssl.h"
     43 #include "sslimpl.h"
     44 
     45 #if defined(WIN32)
     46 #define MAP_ERROR(from,to) if (err == from) { PORT_SetError(to); }
     47 #define DEFINE_ERROR       PRErrorCode err = PR_GetError();
     48 #else
     49 #define MAP_ERROR(from,to)
     50 #define DEFINE_ERROR
     51 #endif
     52 
     53 int ssl_DefConnect(sslSocket *ss, const PRNetAddr *sa)
     54 {
     55     PRFileDesc *lower = ss->fd->lower;
     56     int rv;
     57 
     58     rv = lower->methods->connect(lower, sa, ss->cTimeout);
     59     return rv;
     60 }
     61 
     62 int ssl_DefBind(sslSocket *ss, const PRNetAddr *addr)
     63 {
     64     PRFileDesc *lower = ss->fd->lower;
     65     int rv;
     66 
     67     rv = lower->methods->bind(lower, addr);
     68     return rv;
     69 }
     70 
     71 int ssl_DefListen(sslSocket *ss, int backlog)
     72 {
     73     PRFileDesc *lower = ss->fd->lower;
     74     int rv;
     75 
     76     rv = lower->methods->listen(lower, backlog);
     77     return rv;
     78 }
     79 
     80 int ssl_DefShutdown(sslSocket *ss, int how)
     81 {
     82     PRFileDesc *lower = ss->fd->lower;
     83     int rv;
     84 
     85     rv = lower->methods->shutdown(lower, how);
     86     return rv;
     87 }
     88 
     89 int ssl_DefRecv(sslSocket *ss, unsigned char *buf, int len, int flags)
     90 {
     91     PRFileDesc *lower = ss->fd->lower;
     92     int rv;
     93 
     94     rv = lower->methods->recv(lower, (void *)buf, len, flags, ss->rTimeout);
     95     if (rv < 0) {
     96 	DEFINE_ERROR
     97 	MAP_ERROR(PR_SOCKET_SHUTDOWN_ERROR, PR_CONNECT_RESET_ERROR)
     98     } else if (rv > len) {
     99 	PORT_Assert(rv <= len);
    100 	PORT_SetError(PR_BUFFER_OVERFLOW_ERROR);
    101 	rv = SECFailure;
    102     }
    103     return rv;
    104 }
    105 
    106 /* Default (unencrypted) send.
    107  * For blocking sockets, always returns len or SECFailure, no short writes.
    108  * For non-blocking sockets:
    109  *   Returns positive count if any data was written, else returns SECFailure.
    110  *   Short writes may occur.  Does not return SECWouldBlock.
    111  */
    112 int ssl_DefSend(sslSocket *ss, const unsigned char *buf, int len, int flags)
    113 {
    114     PRFileDesc *lower = ss->fd->lower;
    115     int sent = 0;
    116 
    117 #if NSS_DISABLE_NAGLE_DELAYS
    118     /* Although this is overkill, we disable Nagle delays completely for
    119     ** SSL sockets.
    120     */
    121     if (ss->opt.useSecurity && !ss->delayDisabled) {
    122 	ssl_EnableNagleDelay(ss, PR_FALSE);   /* ignore error */
    123     	ss->delayDisabled = 1;
    124     }
    125 #endif
    126     do {
    127 	int rv = lower->methods->send(lower, (const void *)(buf + sent),
    128 	                              len - sent, flags, ss->wTimeout);
    129 	if (rv < 0) {
    130 	    PRErrorCode err = PR_GetError();
    131 	    if (err == PR_WOULD_BLOCK_ERROR) {
    132 		ss->lastWriteBlocked = 1;
    133 		return sent ? sent : SECFailure;
    134 	    }
    135 	    ss->lastWriteBlocked = 0;
    136 	    MAP_ERROR(PR_CONNECT_ABORTED_ERROR, PR_CONNECT_RESET_ERROR)
    137 	    /* Loser */
    138 	    return rv;
    139 	}
    140 	sent += rv;
    141     } while (len > sent);
    142     ss->lastWriteBlocked = 0;
    143     return sent;
    144 }
    145 
    146 int ssl_DefRead(sslSocket *ss, unsigned char *buf, int len)
    147 {
    148     PRFileDesc *lower = ss->fd->lower;
    149     int rv;
    150 
    151     rv = lower->methods->read(lower, (void *)buf, len);
    152     if (rv < 0) {
    153 	DEFINE_ERROR
    154 	MAP_ERROR(PR_SOCKET_SHUTDOWN_ERROR, PR_CONNECT_RESET_ERROR)
    155     }
    156     return rv;
    157 }
    158 
    159 int ssl_DefWrite(sslSocket *ss, const unsigned char *buf, int len)
    160 {
    161     PRFileDesc *lower = ss->fd->lower;
    162     int sent = 0;
    163 
    164     do {
    165 	int rv = lower->methods->write(lower, (const void *)(buf + sent),
    166 	                               len - sent);
    167 	if (rv < 0) {
    168 	    PRErrorCode err = PR_GetError();
    169 	    if (err == PR_WOULD_BLOCK_ERROR) {
    170 		ss->lastWriteBlocked = 1;
    171 		return sent ? sent : SECFailure;
    172 	    }
    173 	    ss->lastWriteBlocked = 0;
    174 	    MAP_ERROR(PR_CONNECT_ABORTED_ERROR, PR_CONNECT_RESET_ERROR)
    175 	    /* Loser */
    176 	    return rv;
    177 	}
    178 	sent += rv;
    179     } while (len > sent);
    180     ss->lastWriteBlocked = 0;
    181     return sent;
    182 }
    183 
    184 int ssl_DefGetpeername(sslSocket *ss, PRNetAddr *name)
    185 {
    186     PRFileDesc *lower = ss->fd->lower;
    187     int rv;
    188 
    189     rv = lower->methods->getpeername(lower, name);
    190     return rv;
    191 }
    192 
    193 int ssl_DefGetsockname(sslSocket *ss, PRNetAddr *name)
    194 {
    195     PRFileDesc *lower = ss->fd->lower;
    196     int rv;
    197 
    198     rv = lower->methods->getsockname(lower, name);
    199     return rv;
    200 }
    201 
    202 int ssl_DefClose(sslSocket *ss)
    203 {
    204     PRFileDesc *fd;
    205     PRFileDesc *popped;
    206     int         rv;
    207 
    208     fd    = ss->fd;
    209 
    210     /* First, remove the SSL layer PRFileDesc from the socket's stack,
    211     ** then invoke the SSL layer's PRFileDesc destructor.
    212     ** This must happen before the next layer down is closed.
    213     */
    214     PORT_Assert(fd->higher == NULL);
    215     if (fd->higher) {
    216 	PORT_SetError(PR_BAD_DESCRIPTOR_ERROR);
    217 	return SECFailure;
    218     }
    219     ss->fd = NULL;
    220 
    221     /* PR_PopIOLayer will swap the contents of the top two PRFileDescs on
    222     ** the stack, and then remove the second one.  This way, the address
    223     ** of the PRFileDesc on the top of the stack doesn't change.
    224     */
    225     popped = PR_PopIOLayer(fd, PR_TOP_IO_LAYER);
    226     popped->dtor(popped);
    227 
    228     /* fd is now the PRFileDesc for the next layer down.
    229     ** Now close the underlying socket.
    230     */
    231     rv = fd->methods->close(fd);
    232 
    233     ssl_FreeSocket(ss);
    234 
    235     SSL_TRC(5, ("%d: SSL[%d]: closing, rv=%d errno=%d",
    236 		SSL_GETPID(), fd, rv, PORT_GetError()));
    237     return rv;
    238 }
    239