1 /******************************************************************************* 2 **+--------------------------------------------------------------------------+** 3 **| |** 4 **| Copyright 1998-2008 Texas Instruments, Inc. - http://www.ti.com/ |** 5 **| |** 6 **| Licensed under the Apache License, Version 2.0 (the "License"); |** 7 **| you may not use this file except in compliance with the License. |** 8 **| You may obtain a copy of the License at |** 9 **| |** 10 **| http://www.apache.org/licenses/LICENSE-2.0 |** 11 **| |** 12 **| Unless required by applicable law or agreed to in writing, software |** 13 **| distributed under the License is distributed on an "AS IS" BASIS, |** 14 **| WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |** 15 **| See the License for the specific language governing permissions and |** 16 **| limitations under the License. |** 17 **| |** 18 **+--------------------------------------------------------------------------+** 19 *******************************************************************************/ 20 21 /*--------------------------------------------------------------------------*/ 22 /* Module: TI_AdapterQOS.h*/ 23 /**/ 24 /* Purpose: */ 25 /**/ 26 /*--------------------------------------------------------------------------*/ 27 28 #ifndef TI_ADAPTER_QOS_H 29 #define TI_ADAPTER_QOS_H 30 31 #ifdef __cplusplus 32 extern "C" { 33 #endif 34 35 #include "tiQosTypes.h" 36 37 /****************************************************************************** 38 39 Name: TI_SetQosParameters 40 Desc: This function commands the driver to set AC (Tx queue) with 41 specific QOS parameters. 42 Params: hAdapter - The Adapter handle returned by TI_AdapterInit(). 43 pQosParams - A pointer to the OS_802_11_QOS_PARAMS structure: 44 acID - The number of AC to configure (0-3). 45 MaxLifeTime - Maximum time to keep the frame in the HW (msec). 46 VoiceDeliveryProtocol - The protocol used for voice exchange 47 0 = No protocol is used. 48 1 = use PS-Poll frames 49 PSDeliveryProtocol - 0 = Legacy 50 1 = U-APSD 51 Return: TI_RESULT_OK on success. Any other value indicates an error. 52 53 ******************************************************************************/ 54 tiINT32 TI_SetQosParameters (TI_HANDLE hAdapter, 55 OS_802_11_QOS_PARAMS* pQosParams ); 56 57 58 /****************************************************************************** 59 60 Name: TI_GetAPQosParameters 61 Desc: This function retrieves the associated APs QOS parameters. 62 Params: hAdapter - The Adapter handle returned by TI_AdapterInit(). 63 pACQosParams - A Pointer to the OS_802_11_AP_QOS_PARAMS structure: 64 uAC - Indicates the AC to which the function is addressed 65 (range 0-3). 66 uAssocAdmissionCtrlFlag - Indicates if the AC requires admission 67 before data transmission (0-1). 68 uAIFS - Indicates the required AIFS by the AP for the specified 69 AC (2-15). 70 uCwMin - Indicates the required CwMin by the AP for the specified 71 AC (0-15). 72 uCwMax - Indicates the required CwMax by the AP for the specified 73 AC (0-15). 74 uTXOPLimit - Indicates the required TXOPLimit by the AP for the 75 specified AC (in units of 32 microseconds). 76 Return: TI_RESULT_OK indicates success. 77 TI_RESULT_NOT_CONNECTED indicates that the STA is not connected to 78 any AP. 79 TI_RESULT_NO_QOS_AP indicates that the associated AP does not 80 support QOS. 81 TI_RESULT_NOK indicates invalid parameters. 82 Note: This function should be called only after the STA was associated with 83 an infrastructure AP. 84 85 ******************************************************************************/ 86 tiINT32 TI_GetAPQosParameters (TI_HANDLE hAdapter, 87 OS_802_11_AC_QOS_PARAMS* pACQosParams); 88 89 90 /****************************************************************************** 91 92 Name: TI_GetAPQosCapabilitesParameters 93 Desc: This function retrieves the associated APs QOS capabilities. 94 Params: hAdapter - The Adapter handle returned by TI_AdapterInit(). 95 pAPQosCapabiltiesParams - A Pointer to the 96 OS_802_11_AP_QOS_CAPABILITIES_PARAMS structure: 97 uQOSFlag - Flag that indicates whether the AP supports 98 QOS (0-1) 99 uAPSDFlag - Flag that indicates whether the AP supports 100 U-APSD (0-1) 101 Return: TI_RESULT_OK indicates success. 102 TI_RESULT_NOT_CONNECTED indicates that the STA is not connected to any AP. 103 TI_RESULT_NOK indicates invalid parameters. 104 Note: This function should be called only after the STA was associated with 105 an infrastructure AP. 106 107 ******************************************************************************/ 108 tiINT32 TI_GetAPQosCapabilitesParameters (TI_HANDLE hAdapter, 109 OS_802_11_AP_QOS_CAPABILITIES_PARAMS* pAPQosCapabiltiesParams); 110 111 112 /****************************************************************************** 113 114 Name: TI_PollApPackets 115 Desc: This function commands the driver to issue a polling frame to 116 retrieve downlink traffic from the AP. It should be activated by 117 the voice application when there is no uplink traffic during a 118 voice call. This is used for a non-QoS association (so AC_BE 119 is used). 120 Params: hAdapter - The Adapter handle returned by TI_AdapterInit(). 121 Return: TI_RESULT_OK on success. Any other value indicates an error. 122 123 ******************************************************************************/ 124 tiINT32 TI_PollApPackets (TI_HANDLE hAdapter); 125 126 /****************************************************************************** 127 128 Name: TI_PollApPacketsFromAC 129 Desc: This function commands the driver to issue a polling frame to 130 retrieve downlink traffic from the AP. It should be activated by 131 the voice application when there is no uplink traffic during a 132 voice call. The polling is either PS-Poll (for legacy PS) or 133 QoS-Null-Data (for UPSD). 134 Null-Data frame is sent after the PS-Poll to activate the 135 triggered-scan, which is only triggered by data frames. These 136 packets are transmitted on the VO_AC, for QoS associations. 137 Params: hAdapter - The Adapter handle returned by TI_AdapterInit(). 138 AC - The AC to be polled (values may be 0 to 3) 139 Return: TI_RESULT_OK on success. Any other value indicates an error. 140 141 ******************************************************************************/ 142 tiINT32 TI_PollApPacketsFromAC (TI_HANDLE hAdapter, 143 tiUINT32 AC ); 144 145 /****************************************************************************** 146 147 Name: TI_SetShortRetry 148 Desc: This function commands the driver to set Best Effort AC with maximum 149 number of transmits retries to perform for short packets. 150 Params: hAdapter - The Adapter handle returned by TI_AdapterInit(). 151 uShortRetry - Maximum number of transmits retries to perform for 152 short packets 153 Return: TI_RESULT_OK on success. Any other value indicates an error. 154 155 ******************************************************************************/ 156 tiINT32 TI_SetShortRetry (TI_HANDLE hAdapter, 157 tiUINT32 uShortRetry ); 158 159 /****************************************************************************** 160 161 Name: TI_GetShortRetry 162 Desc: This function gets the maximum number of transmits retries to perform 163 for short packets of the Best Effort AC. 164 Params: hAdapter - The Adapter handle returned by TI_AdapterInit(). 165 puShortRetry - Maximum number of transmits retries to perform for 166 short packets. 167 Return: TI_RESULT_OK on success. Any other value indicates an error. 168 169 ******************************************************************************/ 170 tiINT32 TI_GetShortRetry (TI_HANDLE hAdapter, 171 tiUINT32* puShortRetry ); 172 173 174 /****************************************************************************** 175 176 Name: TI_SetLongRetry 177 Desc: This function commands the driver to set Best Effort AC with maximum 178 number of transmits retries to perform for long packets. 179 Params: hAdapter - The Adapter handle returned by TI_AdapterInit(). 180 uLongRetry - Maximum number of transmits retries to perform for long 181 packets. 182 Return: TI_RESULT_OK on success. Any other value indicates an error. 183 184 ******************************************************************************/ 185 tiINT32 TI_SetLongRetry (TI_HANDLE hAdapter, 186 tiUINT32 uLongRetry ); 187 188 /****************************************************************************** 189 190 Name: TI_GetLongRetry 191 Desc: This function gets the maximum number of transmits retries to perform 192 for long packets of the Best Effort AC. 193 Params: hAdapter - The Adapter handle returned by TI_AdapterInit(). 194 puLongRetry - Maximum number of transmits retries to perform for long 195 packets. 196 Return: TI_RESULT_OK on success. Any other value indicates an error. 197 198 ******************************************************************************/ 199 tiINT32 TI_GetLongRetry (TI_HANDLE hAdapter, 200 tiUINT32* puLongRetry); 201 202 /****************************************************************************** 203 204 Name: TI_SetQosRxTimeOut 205 Desc: 206 Params: hAdapter - The Adapter handle returned by TI_AdapterInit(). 207 pRxTimeOut - 208 Return: TI_RESULT_OK on success. Any other value indicates an error. 209 210 ******************************************************************************/ 211 tiINT32 TI_SetQosRxTimeOut (TI_HANDLE hAdapter, 212 OS_802_11_QOS_RX_TIMEOUT_PARAMS* pRxTimeOut); 213 214 215 216 /****************************************************************************** 217 218 Name: TI_AddTspec 219 Desc: This function commands the driver to add TSPEC for the specific 220 user Priority. 221 Params: hAdapter - The Adapter handle returned by TI_AdapterInit(). 222 pTspecParams - Pointer to OS_802_11_QOS_TSPEC_PARAMS strcuture: 223 uUserPriority - Indicates the User priority for which TSPEC is 224 requested (range 0-7) 225 uNominalMSDUsize - Indicates the Nominal MSDU size in units of 226 bytes (16 LSB only). 227 uMeanDataRate - Indicates the average data rate in units of bits 228 per sec 229 uMinimumPHYRate - Indicates the desired minimum PHY rate in units 230 of bits per sec 231 uSurplusBandwidth - 232 hAllowance - Indicates the excess allocation of time (and bandwidth) 233 over and above the stated application rates 234 (represented as fix Q13 numberand used 16 LSB only). 235 uUPSDFlag - Indicates if the AC shouls support U-APSD (0-1) 236 uMediumTime - Indicates the amount of time admitted to this UP. 237 Used only for Tspec response notification (16 LSB 238 only). 239 uReasonCode - Indicates the reason code of AP response (applicable 240 only in TSEPC response event, this field is zero 241 in ADD_TSPEC request). 242 Return: TI_RESULT_OK - Success. Any other value indicates an error. 243 TI_RESULT_TRAFIC_ADM_PENDING Driver is still waiting for a response of previous request. 244 TI_RESULT_AC_ALREADY_IN_USE Means that other user priority from the same AC has already been used. 245 TI_RESULT_NOT_CONNECTED -Indicates that the STA is not connected to any AP. 246 TI_RESULT_NO_QOS_AP - indicates that the associated AP does not support QOS. 247 TI_RESULT_ADM_CTRL_DISABLE Indicates that station configured to not support admission control. 248 TI_RESULT_NOK Parameters are not valid. 249 Notes: 1. Only one TSPEC per AC can be used. For example, user cant 250 request TSPEC for UP 6 and 7 since those two UPs are mapped 251 to the same AC. 252 2. User can issue Tspec request only after he gets a response of 253 the previous request. 254 255 ******************************************************************************/ 256 tiINT32 TI_AddTspec (TI_HANDLE hAdapter, 257 OS_802_11_QOS_TSPEC_PARAMS* pTspecParams); 258 259 /****************************************************************************** 260 261 Name: TI_GetTspecParameters 262 Desc: This function retrieves Tspec parameters for a specific user 263 Priority. 264 Params: hAdapter - The Adapter handle returned by TI_AdapterInit(). 265 pTspecParams - Includes TSPEC parameters as indicated in 266 TI_AddTspec(). 267 Return: TI_RESULT_OK Driver retrieves the TSPEC parameters. 268 TI_RESULT_NOT_CONNECTED - Indicates that the STA is not connected 269 to any AP. 270 TI_RESULT_NO_QOS_AP - indicates that the associated AP does not 271 support QOS. 272 TI_RESULT_TRAFIC_ADM_PENDING Driver is waiting for a TSPEC response. 273 TI_RESULT_NOK Parameters are not valid. 274 Note: This function should be called only after TSPEC Response event 275 with valid reason code. 276 ******************************************************************************/ 277 tiINT32 TI_GetTspecParameters (TI_HANDLE hAdapter, 278 OS_802_11_QOS_TSPEC_PARAMS* pTspecParams); 279 280 /****************************************************************************** 281 282 Name: TI_DeleteTspec 283 Desc: This function commands the driver to remove TSPEC request for the 284 specific user Priority. 285 Params: hAdapter - The Adapter handle returned by TI_AdapterInit(). 286 pDelTspecParams - A Pointer to the OS_802_11_QOS_DELETE_TSPEC_PARAMS structure: 287 uUserPriority - Indicates the User priority of which TSPEC to delete 288 (range 0-7) 289 uReasonCode - Indicates the reason code for delete TSPEC request 290 (32-39,45). 291 Return: TI_RESULT_OK on success. Any other value indicates an error. 292 293 ******************************************************************************/ 294 tiINT32 TI_DeleteTspec (TI_HANDLE hAdapter, 295 OS_802_11_QOS_DELETE_TSPEC_PARAMS* pDelTspecParams); 296 297 /****************************************************************************** 298 299 Name: TI_GetCurrentACStatus 300 Desc: This function retrieves the status of the AC in terms of U-APSD 301 activation and admission granted. 302 Params: hAdapter - The Adapter handle returned by TI_AdapterInit(). 303 pAcStatusParams - Pointer to OS_802_11_QOS_AC_UPSD_STATUS_PARAMS: 304 uAC - Indicates the AC to which the function is addressed 305 (range 0-3) 306 uCurrentUAPSDStatus - Current UAPSD status. 307 uCurrentAdmissionStatus - TRUE if the selected AC can be used 308 for traffic transmission, i.e. either admission is not 309 required by the AP for this AC, or admission is required 310 and a successful TSPEC took place. In all other cases the 311 contents of this field should be FALSE. 312 Return: TI_RESULT_OK - Success. 313 TI_RESULT_NOT_CONNECTED - Indicates that the STA is not connected to 314 any AP. 315 TI_RESULT_NO_QOS_AP - indicates that the associated AP does not 316 support QOS. 317 TI_RESULT_NOK Parameters are not valid. 318 319 ******************************************************************************/ 320 tiINT32 TI_GetCurrentACStatus (TI_HANDLE hAdapter, 321 OS_802_11_AC_UPSD_STATUS_PARAMS *pAcStatusParams); 322 323 /****************************************************************************** 324 325 Name: TI_SetMediumUsageThreshold 326 Desc: This function set the Medium Usage low and high threshold for a 327 specific AC. 328 Params: hAdapter - The Adapter handle returned by TI_AdapterInit(). 329 pThresholdCrossParams - OS_802_11_THRESHOLD_CROSS_PARAMS: 330 uAC - Indicates the AC to which the configuration is addressed 331 (range 0-3) 332 uHighThreshold - Indicates high threshold in percentage over 333 the allowed medium usage (1-100). 334 uLowThreshold - Indicates low threshold in percentage below the 335 allowed medium usage (1-100). 336 Return: TI_RESULT_OK Driver set the thresholds. 337 TI_RESULT_NOK Parameters are not valid. 338 339 ******************************************************************************/ 340 tiINT32 TI_SetMediumUsageThreshold (TI_HANDLE hAdapter, 341 OS_802_11_THRESHOLD_CROSS_PARAMS* pThresholdCrossParams); 342 343 /****************************************************************************** 344 345 Name: TI_GetMediumUsageThreshold 346 Desc: This function retrieves the Medium Usage low and high threshold for 347 a specific AC. 348 Params: hAdapter - The Adapter handle returned by TI_AdapterInit(). 349 pThresholdCrossParams - Pointer that holds the MediumUsage current 350 thresholds (see TI_SetMediumUsageThreshold). 351 Return: TI_RESULT_OK Driver retrieved the thresholds. 352 TI_RESULT_NOK Parameters are not valid. 353 354 ******************************************************************************/ 355 tiINT32 TI_GetMediumUsageThreshold (TI_HANDLE hAdapter, 356 OS_802_11_THRESHOLD_CROSS_PARAMS* pThresholdCrossParams); 357 358 359 /****************************************************************************** 360 361 Name: TI_SetPhyRateThreshold 362 Desc: This function set the Phy Rate low and high thresholds for a 363 specific AC. 364 Params: hAdapter - The Adapter handle returned by TI_AdapterInit(). 365 pThresholdCrossParams - OS_802_11_THRESHOLD_CROSS_PARAMS: 366 uAC - Indicates the AC to which the configuration is addressed 367 (range 0-3) 368 uHighThreshold - Indicates high Phy Rate threshold in Mbs 369 (1,2,5,6,9,11,12,18,24,36,48,54). 370 uLowThreshold - Indicates low Phy Rate threshold in Mbs 371 (1,2,5,6,9,11,12,18,24,36,48,54) 372 Return: TI_RESULT_OK Driver set the thresholds. 373 TI_RESULT_NOK Parameters are not valid. 374 375 ******************************************************************************/ 376 tiINT32 TI_SetPhyRateThreshold (TI_HANDLE hAdapter, 377 OS_802_11_THRESHOLD_CROSS_PARAMS* pThresholdCrossParams); 378 379 380 /****************************************************************************** 381 382 Name: TI_GetPhyRateThreshold 383 Desc: This function retrieves the Phy Rate thresholds for a specific AC. 384 Params: hAdapter - The Adapter handle returned by TI_AdapterInit(). 385 pThresholdCrossParams - Pointer that holds the PhyRate current 386 thresholds. 387 Return: TI_RESULT_OK Driver retrieved the thresholds. 388 TI_RESULT_NOK Parameters are not valid. 389 390 ******************************************************************************/ 391 tiINT32 TI_GetPhyRateThreshold (TI_HANDLE hAdapter, 392 OS_802_11_THRESHOLD_CROSS_PARAMS* pThresholdCrossParams); 393 394 /****************************************************************************** 395 396 Name: TI_GetDesiredPsMode 397 Desc: This function retrieves the desired Power Save mode per AC. The PS 398 mode can be either PS-Poll Legacy or UPSD. 399 Params: hAdapter - The Adapter handle returned by TI_AdapterInit(). 400 desiredPsMode - Pointer that holds the desired PS mode. 401 Return: TI_RESULT_OK Driver retrieved the thresholds. 402 TI_RESULT_NOK Parameters are not valid. 403 404 ******************************************************************************/ 405 tiINT32 TI_GetDesiredPsMode (TI_HANDLE hAdapter, 406 OS_802_11_QOS_DESIRED_PS_MODE *desiredPsMode ); 407 408 /****************************************************************************** 409 410 Name: TI_ConfigTxClassifier 411 Desc: This function sends the configuration buffer to the OsSend package. 412 Params: hAdapter - The Adapter handle returned by TI_AdapterInit(). 413 inParamsBuffLen - Configuration buffer length. 414 inParamsBuff - Configuration buffer pointer. 415 Return: TI_RESULT_OK on success. Any other value indicates an error. 416 417 ******************************************************************************/ 418 tiINT32 TI_ConfigTxClassifier (TI_HANDLE hAdapter, 419 tiUINT32 inParamsBuffLen, 420 tiUINT8 *inParamsBuff); 421 422 /****************************************************************************** 423 424 Name: TI_RemoveClassifierEntry 425 Desc: This function removes a classifier entry. 426 Params: hAdapter - The Adapter handle returned by TI_AdapterInit(). 427 pClsfrEntry - 428 Return: TI_RESULT_OK on success. Any other value indicates an error. 429 430 ******************************************************************************/ 431 tiINT32 TI_RemoveClassifierEntry (TI_HANDLE hAdapter, 432 clsfr_tableEntry_t *pClsfrEntry); 433 434 /****************************************************************************** 435 436 Name: TI_GetClsfrType 437 Desc: This function retrieves the classifier type. 438 Params: hAdapter - The Adapter handle returned by TI_AdapterInit(). 439 currClsfrType - pointer to clsfrTypeAndSupport struct: 440 ClsfrType: one of 441 D_TAG_CLSFR = 0, 442 DSCP_CLSFR =1, 443 PORT_CLSFR =2, 444 IPPORT_CLSFR =3, 445 oldVersionSupport: 446 Return: TI_RESULT_OK on success. Any other value indicates an error. 447 448 ******************************************************************************/ 449 tiINT32 TI_GetClsfrType (TI_HANDLE hAdapter, 450 clsfrTypeAndSupport *currClsfrType ); 451 452 /****************************************************************************** 453 454 Name: TI_SetTrafficIntensityThresholds 455 Desc: This function sets the traffic intensity high and low thresholds. 456 Params: hAdapter - The Adapter handle returned by TI_AdapterInit(). 457 pTrafficThresholds - A pointer to the 458 OS_802_11_TRAFFIC_INTENSITY_THRESHOLD_PARAMS structure values: 459 uHighThreshold, uLowThreshold, TestInterval; 460 Return: TI_RESULT_OK on success. Any other value indicates an error. 461 462 ******************************************************************************/ 463 tiINT32 TI_SetTrafficIntensityThresholds (TI_HANDLE hAdapter, 464 OS_802_11_TRAFFIC_INTENSITY_THRESHOLD_PARAMS* pTrafficThresholds); 465 466 /****************************************************************************** 467 468 Name: TI_GetTrafficIntensityThresholds 469 Desc: This function retrieves the traffic intensity high and low thresholds. 470 Params: hAdapter - The Adapter handle returned by TI_AdapterInit(). 471 pTrafficThresholds - A pointer to the 472 OS_802_11_TRAFFIC_INTENSITY_THRESHOLD_PARAMS structure values. 473 Return: TI_RESULT_OK on success. Any other value indicates an error. 474 475 ******************************************************************************/ 476 tiINT32 TI_GetTrafficIntensityThresholds (TI_HANDLE hAdapter, 477 OS_802_11_TRAFFIC_INTENSITY_THRESHOLD_PARAMS* pTrafficThresholds); 478 479 /****************************************************************************** 480 481 Name: TI_ToggleTrafficIntensityEvents 482 Desc: This function toggles between the traffic intensity operation. 483 Params: hAdapter - The Adapter handle returned by TI_AdapterInit(). 484 NewStatus - Enable or disable value (TRUE or FALSE) 485 Return: TI_RESULT_OK on success. Any other value indicates an error. 486 487 ******************************************************************************/ 488 tiINT32 TI_ToggleTrafficIntensityEvents (TI_HANDLE hAdapter, 489 tiUINT32 NewStatus ); 490 491 tiINT32 TI_SetDTagToAcMappingTable(TI_HANDLE hAdapter, acTrfcType_e* pDtagToAcTable ); 492 tiINT32 TI_SetVAD(TI_HANDLE hAdapter, txDataVadTimerParams_t* pVadTimer ); 493 tiINT32 TI_GetVAD(TI_HANDLE hAdapter, txDataVadTimerParams_t* pVadTimer ); 494 495 #ifdef __cplusplus 496 } 497 #endif 498 499 #endif /* TI_ADAPTER_QOS_H*/ 500
