1 This target is only valid in the 2 .B nat 3 table, in the 4 .B PREROUTING 5 and 6 .B OUTPUT 7 chains, and user-defined chains which are only called from those 8 chains. It specifies that the destination address of the packet 9 should be modified (and all future packets in this connection will 10 also be mangled), and rules should cease being examined. It takes one 11 type of option: 12 .TP 13 .BR "--to-destination " "[\fIipaddr\fP][-\fIipaddr\fP][:\fIport\fP-\fIport\fP]" 14 which can specify a single new destination IP address, an inclusive 15 range of IP addresses, and optionally, a port range (which is only 16 valid if the rule also specifies 17 .B "-p tcp" 18 or 19 .BR "-p udp" ). 20 If no port range is specified, then the destination port will never be 21 modified. If no IP address is specified then only the destination port 22 will be modified. 23 .RS 24 .PP 25 In Kernels up to 2.6.10 you can add several --to-destination options. For 26 those kernels, if you specify more than one destination address, either via an 27 address range or multiple --to-destination options, a simple round-robin (one 28 after another in cycle) load balancing takes place between these addresses. 29 Later Kernels (>= 2.6.11-rc1) don't have the ability to NAT to multiple ranges 30 anymore. 31 32
