libncurses.so.5 __gmon_start__ _Jv_RegisterClasses cbreak delwin tgoto tgetflag curscr scrollok tgetent nl stdscr acs_map waddch napms clearok PC tgetnum noecho wattr_on wclrtobot wgetch def_shell_mode wtouchln wborder nodelay waddnstr _fini BC endwin _init resetty wattr_off wrefresh werase savetty def_prog_mode keypad COLS tputs wclear wclrtoeol newwin wmove initscr tgetstr LINES UP beep libz.so.1 inflate inflateReset inflateInit_ inflateEnd libm.so.6 pow ldexp frexp libc.so.6 _IO_stdin_used socket fflush strcpy __rawmemchr vasprintf execl re_set_syntax fnmatch readdir execv _IO_putc setlocale mbrtowc towlower strncmp optind getpwent strrchr wait pipe __strdup tcdrain wcrtomb connect getpwuid mmap64 closedir ftell strncpy signal sigprocmask time __stack_chk_fail __lxstat unlink select iswprint realloc btowc towupper abort stdin _exit socketpair strpbrk getpid kill chmod sbrk __assert_fail iswalnum iswlower strtod __ctype_get_mb_cur_max strtok strtol endpwent isatty feof cfsetispeed fgetc fgets getpwnam calloc strlen ungetc __mbrlen send sigemptyset memset strstr strcspn tcsendbreak __errno_location tcsetattr fseek chdir getpagesize getsockopt tcflow dup2 clearerr __fxstat64 vsnprintf poll re_comp sigaddset iswupper __sigsetjmp stdout fputc fseeko64 recv getrusage fputs regerror memcpy fclose tcsetpgrp strtoul setsockopt malloc siglongjmp strcat umask strcasecmp ftello64 realpath raise remove setpgid getgid __lxstat64 nl_langinfo opendir __xstat64 getenv __ctype_b_loc sscanf regcomp optarg wcwidth stderr sigdelset ioctl system setrlimit64 munmap wait4 _obstack_newchunk gethostbyname getuid execvp strncasecmp __fxstat strncat fileno re_search _obstack_memory_used getcwd fwrite fread gettimeofday iconv_close sigaction rename tcflush waitpid lseek64 strchr obstack_free iswdigit vfork iconv re_compile_fastmap fdopen qsort iconv_open tcgetattr sleep __ctype_toupper_loc __ctype_tolower_loc bsearch setvbuf setsid fcntl getrlimit64 cfsetospeed __xstat memmove _mcleanup fopen64 _obstack_begin access _IO_getc setbuf strcmp strerror tcgetpgrp __libc_start_main setpwent ferror setenv wcslen strcoll vfprintf getopt_long_only re_exec monstartup __environ __cxa_atexit _edata __bss_start _end GLIBC_2.0 GLIBC_2.2.3 GLIBC_2.4 GLIBC_2.3 GLIBC_2.2 GLIBC_2.1 GLIBC_2.1.3
tui /usr/local/bin HOME /usr/local/lib/debug /usr/local/share/gdb console * local init file: ./%s Report bugs to "%s". mi1 Interpreter `%s' unrecognized warning: Startup time: %ld.%06ld Startup size: data size %ld xdb dbx quiet nx batch-silent batch epoch fullname annotate help eval-command nw nowindows statistics return-child-result %s: warning: error finding working directory: %s /usr/local/google/home/android/cupcake_rel_root warning: could not set baud rate to `%s'. warning: could not set timeout limit to `%s'. Use `%s --help' for a complete list of options. %s: `--args' specified but no program specified Excess command line arguments ignored. (%s%s) This is the GNU debugger. Usage: gdb [options] [executable-file [core-file or process-id]] gdb [options] --args executable-file [inferior-arguments ...] Options: --args Arguments after executable-file are passed to inferior -b BAUDRATE Set serial port baud rate used for remote debugging. --batch Exit after processing options. --batch-silent As for --batch, but suppress all gdb stdout output. --return-child-result GDB exit code will be the child's exit code. --cd=DIR Change current directory to DIR. --command=FILE, -x Execute GDB commands from FILE. --eval-command=COMMAND, -ex Execute a single GDB command. May be used multiple times and in conjunction with --command. --core=COREFILE Analyze the core dump COREFILE. --pid=PID Attach to running process PID. --dbx DBX compatibility mode. --directory=DIR Search for source files in DIR. --epoch Output information used by epoch emacs-GDB interface. --exec=EXECFILE Use EXECFILE as the executable. --fullname Output information used by emacs-GDB interface. --help Print this message. --interpreter=INTERP Select a specific interpreter / user interface -l TIMEOUT Set timeout in seconds for remote debugging. --nw Do not use a window interface. --nx Do not read file. --quiet Do not print version number on startup. --readnow Fully read symbol files on first access. --se=FILE Use FILE as symbol file and executable file. --symbols=SYMFILE Read symbols from SYMFILE. --tty=TTY Use TTY for input/output by the program being debugged. --tui Use a terminal user interface. --version Print version information and then exit. -w Use a window interface. --write Set writing into executable and core files. --xdb XDB compatibility mode. At startup, GDB reads the following init files and executes their commands: * system-wide init file: %s * user-specific init file: %s For more information, type "help" from within GDB, or consult the GDB manual (available as on-line info or a printed manual). Interpreter `%s' failed to initialize. Can't attach to process and specify a core file at the same time. C 5 0 l C 6 ' Local exec file Can't create a corefile .text `%s', file type %s. Entry point: %s - %s @ %s is %s Mapping info for file `%s'. file(member) dend dstart tend tstart Section %s not found cannot close "%s": %s No executable file now. r+b File not changed. Use an executable file as a target. Specify the filename of the executable file. Use FILE as program to be debugged. It is read for its symbols, for getting the contents of pure memory, and it is the program executed when you use the `run' command. If FILE cannot be found as specified, your execution directory path ($PATH) is searched for a command of that name. No arg means to have no executable file and no symbols. Use FILE as program for getting contents of pure memory. If FILE cannot be found as specified, your execution directory path is searched for a command of that name. No arg means have no executable file. Change the base address of section SECTION of the exec file to ADDR. This can be used if the exec file does not contain section addresses, (such as in the a.out format), or when the addresses specified in the file itself are wrong. Each section must be changed separately. The ``info files'' command lists all the sections and their addresses. Show writing into executable and core files. Set writing into executable and core files. Writing into executable and core files is %s. Cannot find section for the entry point of %s. %*s %*s %*s %*s %8.8s %s 0x%s 0x%s 0x%s 0x%s %s%s%s%s Must specify section name and its virtual address failed internal consistency check /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/exec.c "%s": could not open as an executable file: %s "%s": not in executable format: %s "%s": can't find the file sections: %s A program is being debugged already. Are you sure you want to change the file? No executable file name was specified data->index < objfile->num_data /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/objfiles.c unlink_objfile: objfile already unlinked put_objfile_before: before objfile not in list objfile->separate_debug_objfile_backlink == NULL objfile->separate_debug_objfile_link == NULL *p_refcount == 1 || *p_refcount == 2 get_objfile_pspace_data (pspace)->objfiles_changed_p != 0 (a->objfile->separate_debug_objfile_backlink == b->objfile) || (b->objfile->separate_debug_objfile_backlink == a->objfile) unexpected overlap between: (A) section `%s' from `%s' [%s, %s) (B) section `%s' from `%s' [%s, %s). Will ignore section B pspace_info->num_sections == 0 Section index is uninitialized sect_index_text not initialized debug_objfile->num_sections == bfd_count_sections (debug_objfile->obfd) Entry point address is not known. Can't find the file sections in `%s': %s %s: Assertion `%s' failed. objfile && parent res != NULL objfile->data != NULL i == map_size - 1 map_size / 2 <= j sect1_addr <= sect2_addr alloc_size == map_size objfile->data == NULL <> gdb_bfd_unref objfile_data set_objfile_data clear_objfile_data find_pc_section update_section_map filter_debuginfo_sections preferred_obj_section filter_overlapping_sections qsort_cmp objfile_relocate free_objfile objfile_free_data add_separate_debug_objfile objfile_separate_debug_iterate objfile_alloc_data observer_notify_test_notification() called observer_notify_memory_changed() called observer_notify_inferior_exit() called observer_notify_inferior_appeared() called observer_notify_thread_ptid_changed() called observer_notify_architecture_changed() called observer_notify_tracepoint_modified() called observer_notify_tracepoint_deleted() called observer_notify_tracepoint_created() called observer_notify_breakpoint_modified() called observer_notify_breakpoint_deleted() called observer_notify_breakpoint_created() called observer_notify_about_to_proceed() called observer_notify_target_resumed() called observer_notify_thread_stop_requested() called observer_notify_thread_exit() called observer_notify_new_thread() called observer_notify_new_objfile() called observer_notify_solib_unloaded() called observer_notify_solib_loaded() called observer_notify_inferior_created() called observer_notify_executable_changed() called observer_notify_target_changed() called observer_notify_normal_stop() called When non-zero, observer debugging is enabled. Failed to detach observer Show observer debugging. Set observer debugging. Observer debugging is %s. /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/minsyms.c sect_index_data not initialized section != NULL gcc_compiled. gcc2_compiled. __gnu_compiled gnu-v3 lookup_minimal_symbol_by_pc_section_1 The current BFD target is "%s". Use FILE as core dump for examining memory and registers. No arg means have no core file. This command has been superseded by the `target core' and `detach' commands. Use `set gnutarget auto' to specify automatic detection. Cannot access memory at address %s Error accessing memory address %s: %s. No executable file specified. Use the "file" or "exec-file" command. core file may not match specified executable file. exec file is newer than core file. GDB can't read core files on this machine. auto Show the current BFD target. Set the current BFD target. gnutarget GNUTARGET Show max number of complaints about incorrect symbols. Set max number of complaints about incorrect symbols. Max number of complaints about incorrect symbols is %s. /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/complaints.c complaints bad switch During symbol reading, During symbol reading... (gdb) operate-and-get-next Show gdb's prompt Set gdb's prompt dont-repeat editing confirm Show annotation_level. Set annotation_level. exec-done-display interactive-mode Show GDB's data directory. Set GDB's data directory. data-directory Annotation_level is %s. Gdb's prompt is "%s". HISTSIZE GDBHISTFILE /.gdb_history verbose Set verbosity. Show verbosity. set history %5d %s Quitting: Quit anyway? (GDB) GNU gdb %s%s This GDB was configured as " --host=%s --target=%s !gdb_readline_wrapper_done pre- post- server Don't repeat this command. Primarily used inside of user-defined commands that should not be repeated when hitting return. Use "on" to enable the editing, and "off" to disable it. Without an argument, command line editing is enabled. To edit, use EMACS-like or VI-like commands like control-P or ESC. Show editing of command lines as they are typed. Set editing of command lines as they are typed. Use "on" to enable the saving, and "off" to disable it. Without an argument, saving is enabled. Show saving of the history record on exit. Set saving of the history record on exit. ie. the number of previous commands to keep a record of. Show the size of the command history, Set the size of the command history, (the list of previous commands of which a record is kept). Show the filename in which to record the command history Set the filename in which to record the command history Show whether to confirm potentially dangerous operations. Set whether to confirm potentially dangerous operations. 0 == normal; 1 == fullname (for use when running under emacs) 2 == output annotated suitably for use by programs that control GDB. Use "on" to enable the notification, and "off" to disable it. Show notification of completion for asynchronous execution commands. Set notification of completion for asynchronous execution commands. If on, run in interactive mode and wait for the user to answer all queries. If off, run in non-interactive mode and automatically assume the default answer to all queries. If auto (the default), determine which mode to use based on the standard input settings Show whether GDB runs in interactive mode Set whether GDB should run in interactive mode or not When set, GDB uses the specified path to search for data files. Notification of completion for asynchronous execution commands is %s. Editing of command lines as they are typed is %s. The filename in which to record the command history is "%s". The size of the command history is %s. Saving of the history record on exit is %s. Whether to confirm potentially dangerous operations is %s. History size must be non-negative Set verbose printing of informational messages. Show verbose printing of informational messages. "set history" must be followed by the name of a history subcommand. Debugger's interactive mode is %s (currently %s). Debugger's interactive mode is %s. A debugging session is active. Do you still want to close the debugger? A debugging session is active. Inferior %d [%s] will be detached. Inferior %d [%s] will be killed. Copyright (C) 2010 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. For bug reporting instructions, please see: input_handler == gdb_readline_wrapper_line /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/top.c after_char_processing_hook == NULL That is not a command, just a help topic. Command execution time: %ld.%06ld Space used: %ld (%s%ld for this command) gdb_readline_wrapper gdb_readline_wrapper_cleanup gdb_readline_wrapper_line \n \b \t \f \r \e \a \%.3o n && (n & (n-1)) == 0 ret < size %lx%08lx %08lx%08lx %04x %s%0*lu %s%0*lu%09lu %s%0*lu%09lu%09lu %*o 0%0*lo 0%0*lo%010lo 0%0*lo%010lo%010lo vasprintf call failed virtual memory exhausted. li EMACS width Show state of pagination. Set state of pagination. Enable pagination Disable pagination sevenbit-strings asm-demangle timestamp maintenance set maintenance show quit %ld:%ld %s%s pre-prompt-for-continue post-prompt-for-continue chars_per_line > 0 \x%02x \\ \v State of pagination is %s. [y] [n] pre-query (%s or %s) query EOF [assumed %c] Please answer %s or %s. post-query Quit process-id to attach Illegal process-id: %s. invalid hex "%s" invalid decimal "%s" internal-error internal-warning ZQ NQ Q ~Q P rQ fQ P P P P P P P P P P P P P 3Q ask yes no align_down align_up 0 w,a Q m jp5 c d 2 y +L | ~ - d jHq A } mQ V l kdz b e O\ l cc= n;^ iL A` rqg jm Zjz ' }D h i]Wb ge q6l knv + Zz J go C ` ~ 8R O g gW ?K6 H + L J 6`z A ` U g n1y iF a f o%6 hR w G "/& U ; ( Z + j \ 1 , [ d & c ju m ?6 g r W J z + {8 |! B hn [& w owG Z pj ; f\ e i b kaE l x T N 9a&g ` MGiI wn>Jj Z f @ ; 7S G 0 0 S $ 6 )W T g #.zf Ja h] +o*7 Z -puts_filtered_tabular xsnprintf /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/utils.c hex_string_custom: insufficient space to store result virtual memory exhausted: can't allocate %ld bytes. Show number of characters gdb thinks are in a line. Set number of characters gdb thinks are in a line. Show number of lines gdb thinks are in a page. Set number of lines gdb thinks are in a page. Show demangling of encoded C++/ObjC names when displaying symbols. Set demangling of encoded C++/ObjC names when displaying symbols. Show printing of 8-bit characters in strings as \nnn. Set printing of 8-bit characters in strings as \nnn. Show demangling of C++/ObjC names in disassembly listings. Set demangling of C++/ObjC names in disassembly listings. When set, debugging messages will be marked with seconds and microseconds. Show timestamping of debugging messages. Set timestamping of debugging messages. Configure what GDB does when %s is detected. Show what GDB does when %s is detected. Set whether GDB should quit when an %s is detected Show whether GDB will quit when an %s is detected Set whether GDB should create a core file of GDB when %s is detected Show whether GDB will create a core file of GDB when %s is detected %s Unable to dump core, use `ulimit -c unlimited' before executing GDB next time. Timestamping debugging messages is %s. Number of characters gdb thinks are in a line is %s. Number of lines gdb thinks are in a page is %s. Printing of 8-bit characters in strings as \nnn is %s. Demangling of C++/ObjC names in disassembly listings is %s. Demangling of encoded C++/ObjC names when displaying symbols is %s. (%s or %s) [answered %c; input not from terminal] %s:%d: %s: %s A problem internal to GDB has been detected, further debugging may prove unreliable. %s Quit this debugging session? %s Create a core file of GDB? free_current_contents: NULL pointer Quit (expect signal SIGINT when the program is resumed) The escape sequence `%c' is equivalent to plain `%c', which has no equivalent in the `%s' character set. ui_file_data: bad magic number /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/ui-file.c tee_file_isatty: bad magic number tee_file_fputs: bad magic number tee_file_write: bad magic number tee_file_flush: bad magic number mem_file_put: bad magic number mem_file_rewind: bad magic number mem_file_delete: bad magic number tee_file_delete: bad magic number stdio_file_isatty: bad magic number stdio_file_read: bad magic number stdio_file_fputs: bad magic number stdio_file_write: bad magic number stdio_file_flush: bad magic number stdio_file_delete: bad magic number mem_file_write: bad magic number set backtrace backtrace show backtrace past-main past-entry Show frame debugging. Set frame debugging. Frame debugging is %s. frame->prologue_cache == NULL !frame->prev_p !frame->this_id.p Invalid frame stop reason frame did not save the PC this_frame frame->unwind == NULL { get_prev_frame (this_frame= ) -> // %s} No unwind_pc method frame->next != NULL %s=%s !%s special ,inlined=%d { frame_id_eq (l= ,r= ) -> %d } { frame_id_inner (l= level=%d type= NORMAL_FRAME DUMMY_FRAME INLINE_FRAME SENTINEL_FRAME SIGTRAMP_FRAME ARCH_FRAME unwind= pc= func= { reinit_frame_cache () } -> No registers. No stack. No memory. No selected thread. Invalid selected thread. Target is executing. selected_frame != NULL -> optimized out register=%d address=%s computed lazy bytes= optimizedp != NULL lvalp != NULL addrp != NULL realnump != NULL Missing unwind SP method { frame_id_p (l= { get_frame_id (fi=%d) this_frame != NULL // cached // this ID is NULL } // this frame ID is inner } // this frame has same ID } // no saved PC } inside main func backtrace limit exceeded inside entry func zero PC Cannot pop the initial frame. Set backtrace specific variables. Configure backtrace variables such as the backtrace limit Show backtrace specific variables Show backtrace variables such as the backtrace limit Normally the caller of "main" is not of interest, so GDB will terminate the backtrace at "main". Set this variable if you need to see the rest of the stack trace. Show whether backtraces should continue past "main". Set whether backtraces should continue past "main". Normally there are no callers beyond the entry point of a program, so GDB will terminate the backtrace there. Set this variable if you need to see the rest of the stack trace. Show whether backtraces should continue past the entry point of a program. Set whether backtraces should continue past the entry point of a program. No more than the specified number of frames can be displayed or examined. Zero is unlimited. Show the upper bound on the number of backtrace levels. Set an upper bound on the number of backtrace levels. When non-zero, frame specific internal debugging is enabled. An upper bound on the number of backtrace levels is %s. Whether backtraces should continue past the entry point of a program is %s. Whether backtraces should continue past "main" is %s. /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/frame.c unwinder did not report frame ID previous frame inner to this frame (corrupt stack?) previous frame identical to this frame (corrupt stack?) { frame_unwind_arch (next_frame=%d) -> %s } { frame_unwind_caller_pc (this_frame=%d) -> %s } l.code_addr_p && r.code_addr_p { create_sentinel_frame (...) -> { create_new_frame (addr=%s, pc=%s) { frame_unwind_register_value (frame=%d,regnum=%d(%s),...) this_frame == NULL || this_frame->level >= 0 frame != NULL && frame->next != NULL Bad debug information detected: Attempt to read %d bytes from registers. Attempt to assign to a value that was optimized out. Attempt to assign to an unmodifiable value. { get_frame_func (this_frame=%d) -> %s } frame_id_p (fi->this_id.value) { get_prev_frame_1 (this_frame= frame_prepare_for_sniffer frame_cleanup_after_sniffer frame_unwind_program_space get_frame_pc get_prev_frame get_prev_frame_1 frame_id_inner frame_register_unwind_location get_selected_frame frame_unwind_register_value frame_register frame_register_unwind get_frame_id frame_unwind_find_by_frame failed /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/frame-unwind.c unordered_remove state != NULL frame_id_p (*this_id) quick_push /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/inline-frame.c depth >= state->skipped_frames !frame_id_eq (*this_id, outer_frame_id) state != NULL && state->skipped_frames > 0 find_inline_frame_state (ptid) == NULL @1& inline_frame_sniffer VEC_inline_state_s_unordered_remove inline_frame_this_id inline_skipped_symbol step_into_inline_frame skip_inline_frames VEC_inline_state_s_quick_push The currently selected C++ ABI is " GDB does not support pointers to methods on this target ABI doesn't define required function baseclass_offset ABI doesn't define required function is_operator_name ABI doesn't define required function is_vtable_name ABI doesn't define required function is_destructor_name ABI doesn't define required function is_constructor_name Could not find "%s" in ABI list Too many C++ ABIs, please increase CP_ABI_MAX in cp-abi.c /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/cp-abi.c Set the ABI used for inspecting C++ objects. "set cp-abi" with no arguments will list the available ABIs. Show the ABI used for inspecting C++ objects. Cannot find C++ ABI "%s" to set it as auto default. Automatically selected; currently "%s" cp-abi " ( longname The available C++ ABIs are: cp-abi-list doc currently "%s" maintenance cplus C++ maintenance commands. cplus first_component last_template == NULL name[current_len] == ':' += ->* -= *= /= %= != == && <<= << >>= &= |= || ^= Print the first class/namespace component of NAME. "maintenance cplus" must be followed by the name of a command. RTTI symbol not found for class '%s' RTTI symbol for class '%s' is not a type RTTI symbol for class '%s' is a namespace RTTI symbol for class '%s' has bad type /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/cp-support.c unexpected demangled name '%s' K D D 0 7 K K 0 0 0 0 0 0 0 K K P ` ` ! ` ` ` P n ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] ] r + 5& s + 5& C$& a6- 5& & 5& G+ 6& Y6- 6& C- 6& 6& e- 6& 6& 6& 6& 9 % 6& + 6& Vf) B- 6& 6& 6& "6& >+- %6& YA- _A- q/ p/ &j) , & & cp_entire_prefix_len unqualified_name_from_comp Printing of inferior events is %s. Requires argument (inferior id to kill) Requires argument (inferior id to detach) /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/inferior.c [Switching to inferior %d [%s] (%s)] [Switching to thread %d (%s)] Can not remove current symbol inferior. is vfork parent of inferior IDs of currently known inferiors. Add a new inferior. Usage: add-inferior [-copies ] [-exec ] N is the optional number of inferior to add, default is 1. FILENAME is the file name of the executable to use as main program. Remove inferior ID. Usage: remove-inferior ID Clone inferior ID. Usage: clone-inferior [-copies ] [ID] Add N copies of inferior ID. The new inferior has the same executable loaded as the copied inferior. If -copies is not specified, adds 1 copy. If ID is not specified, it is the current inferior that is cloned. Use this command to switch between inferiors. The new inferior ID must be currently known. Show printing of inferior events (e.g., inferior start and exit). Set printing of inferior events (e.g., inferior start and exit). Inferior ID %d not known. Inferior has no threads. data->index < inf->num_data pid != 0 inf != NULL (running) inf->data != NULL No inferiors. inferiors current Num Description target-id Executable is vfork child of inferior vfork-parent vfork-child [Inferior %d exited] [Inferior %d detached] inf->data == NULL [New inferior %d] add-inferior remove-inferior clone-inferior Detach from inferior ID. Kill inferior ID. inferior-events No argument to -copies Invalid copies number Invalid argument Added inferior %d. No argument to -exec Added inferior %d inferior_data set_inferior_data clear_inferior_data inferior_free_data find_inferior_pid inferior_alloc_data set_current_inferior data->index < pspace->num_data /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/progspace.c pspace != current_program_space program space ID %d not known. Info about currently known program spaces. pspace->data != NULL pspaces Id Bound inferiors: ID %d (%s) , ID %d (%s) pspace->data == NULL program-spaces print_program_space program_space_data set_program_space_data clear_program_space_data release_program_space program_space_free_data set_current_program_space program_space_alloc_data Print inferior's saved terminal status. Failed to create new terminal session: setsid: %s GDB: Failed to set controlling terminal: %s This GDB does not control a terminal. Inferior's terminal status (currently saved by GDB): [%s failed in terminal_inferior: %s] /dev/tty dup'ing tty into fd 0 dup'ing tty into fd 1 dup'ing tty into fd 2 File descriptor flags = O_RDONLY O_WRONLY O_RDWR | O_NONBLOCK | O_NDELAY | O_APPEND | 0x%x Process group = %d fcntl F_SETFL setting tty state tcsetpgrp [5 K5 >5 .5 $5 5 5 4 4 4 4 4 4 4 B B k o o 8 8 8 8 8 8 o o 8 8 w _ w _ C C C C y p p p p G G G G v v v v \ \ \ \ \ \ \ \ % h N & y l g g g g ` \ S F set_disassembly_style T- rT- S& \- [- [- [- [- [- [- [- [- [- 1 ' 4V& C- 7V& ` * m * :V& z * =V& @V& CV& FV& DQ& T- rT- S& \- [- [- [- [- [- [- [- [- [- [- [- [- ! . * JV& * MV& + % Ph. t . zh. h. PV& S& + + 1 ' 4V& C- 1j- Q& SV& VV& YV& Y) \V& _V& bV& eV& hV& U& kV& nV& rV& vV& zV& ~V& V& V& V& V& V& V& V& V& V& V& V& V& V& V& V& V& V& V& V& V& V& V& V& V& V& V& V& V& V& V& V& W& W& W& W& W& W& & & & & "W& (W& .W& 4W& & & & & [- C- [- 4V& [- 1 ' arm_pseudo_write arm_pseudo_read VEC_arm_mapping_symbol_s_index arm_record_special_symbol VEC_arm_mapping_symbol_s_last VEC_arm_mapping_symbol_s_quick_insert VEC_arm_mapping_symbol_s_quick_push arm_vfp_cprc_sub_candidate Q& :W& =W& @W& CW& FW& IW& LW& OW& RW& UW& YW& ]W& aW& eW& iW& Q& mW& pW& sW& vW& yW& |W& W& W& W& W& W& W& W& W& W& W& W& W& W& W& W& W& W& W& W& W& W& W& W& W& W& arm_register_sim_regno T- rT- S& \- [- [- [- [- [- [- 1j- Q& + 1 ' 4V& cleanup_block_load_pc cleanup_block_load_all thumb_get_next_pc blx set arm show arm reg-names-std %s - %s The default is "std". The valid values are: Show the disassembly style. Set the disassembly style. disassembler Set usage of ARM 32-bit mode. apcs32 Show the floating point type. Set the floating point type. fpu Show the ABI. Set the ABI. fallback-mode force-mode Show ARM debugging. Set ARM debugging. The current ARM ABI is "%s". Bad REGNUM %d Invalid VFP CPRC type: %d. Unexpected register %d could not update architecture Invalid ABI accepted: %s. org.gnu.gdb.arm.core cpsr org.gnu.gdb.arm.fpa org.gnu.gdb.xscale.iwmmxt org.gnu.gdb.arm.vfp s0 org.gnu.gdb.arm.neon q0 unknown ARM EABI version 0x%x regnum >= num_regs regnum < 32 count == 0 unknown type alignment IVO DVZ OFL UFL INX Hardware FPU type %d Software FPU type %d mask: flags: __gdb_builtin_type_neon_q u8 u16 u32 u64 __gdb_builtin_type_neon_d builtin_type_arm_ext displaced: writing pc %.8lx num_to_shuffle < 16 ldrb ldr strb copro load/store vfp/neon mrrc/mcrr vfp/neon vstm/vpush vfp/neon vldm/vpop neon 64bit xfer mcrr/mcrr2 mrrc/mrrc2 vfp dataproc cdp/cdp2 neon 8/16/32 bit xfer mcr/mcr2 mrc/mrc2 preload reg preload cps neon dataproc neon elt/struct load/store unallocated mem hint clrex dsb dmb isb srs rfe stc/stc2 __ARM_call_via_ displaced: copy %s->%s: movw movt msr imm ALU immediate ALU ALU reg ALU shifted reg mrs/msr clz bxj saturating add/sub bkpt smc halfword mul/mla synch extra load/store unpriveleged parallel add/sub signed parallel add/sub unsigned usad8 usada8 sbfx bfc bfi ubfx unpredictable ldm/stm dsc->u.block.load != 0 before inc dec ldm (itstate & 0x0f) != 0 Infinite loop detected Bad bit-field extraction fake struct return in %s = %s arg %d in %s = 0x%s arg %d @ sp + %d name[0] == '$' last quick_insert softfpa softvfp AAPCS lr f0 f3 f5 f6 f7 fps a3 v1 v8 wr d0 d1 d3 d4 d5 d6 d7 d9 d10 d11 d12 d13 d14 d15 d16 d17 d18 d19 d20 d21 d22 d23 d24 d25 d26 d27 d28 d29 d30 d31 wR0 wR1 wR2 wR3 wR4 wR5 wR6 wR7 wR8 wR9 wR10 wR11 wR12 wR13 wR14 wR15 wCID wCon wCSSF wCASF wCGR0 wCGR1 wCGR2 wCGR3 q1 q2 q3 q4 q5 q6 q7 q8 q9 q10 q11 q12 q13 q14 q15 s1 s2 s3 s4 s5 s6 s7 s8 s9 s10 s11 s12 s13 s14 s15 s16 s17 s18 s19 s20 s21 s22 s23 s24 s25 s26 s27 s28 s29 s30 s31 arm_dump_tdep: Lowest pc = 0x%lx displaced: copying unpredictable insn %.8lx displaced: copying undefined insn %.8lx displaced: copying %s immediate insn %.8lx displaced: copying insn %.8lx, opcode/class '%s' unmodified Various ARM-specific commands. When off, a 26-bit PC will be used. Show usage of ARM 32-bit mode. auto - Determine the FP typefrom the OS-ABI. softfpa - Software FP, mixed-endian doubles on little-endian ARMs. fpa - FPA co-processor (GCC compiled). softvfp - Software FP with pure-endian doubles. vfp - VFP co-processor. Show the mode assumed when symbols are unavailable. Set the mode assumed when symbols are unavailable. Show the mode assumed even when symbols are available. Set the mode assumed even when symbols are available. When on, arm-specific debugging is enabled. The current execution mode assumed (even when symbols are available) is "%s". The current execution mode assumed (when symbols are unavailable) is "%s". The current ARM ABI is "auto" (currently "%s"). The current ARM floating point model is "auto" (currently "%s"). The current ARM floating point model is "%s". current < num_disassembly_options /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/arm-tdep.c reg >= 0 && reg < gdbarch_num_regs (gdbarch) Invalid fp model accepted: %s. "set arm" must be followed by an apporpriate subcommand. arm_gdbarch_init: bad byte order for float format (TYPE_LENGTH (t) % unitlen) == 0 displaced: read pc value %.8lx displaced: read r%d value %.8lx displaced: copying %s register insn %.8lx arm_store_return_value: Floating point model not supported arm_extract_return_value: Floating point model not supported Single-stepping BX to non-word-aligned ARM instruction. Instruction wrote to PC in an unexpected way when single-stepping Invalid argument to displaced_write_reg displaced: writing r%d value %.8lx displaced: cleanup for svc, resume at %.8lx displaced: LDM: move loaded register r%d to r%d displaced: LDM: register r%d already in the right place displaced: LDM: restored clobbered register r%d displaced: copying %s%s insn %.8lx displaced: copying coprocessor load/store insn %.8lx displaced: copying svc insn %.8lx displaced: copying preload insn %.8lx displaced: writing insn %.8lx at %.8lx displaced: detected PC offset %.8lx for STM instruction Displaced stepping is only supported in ARM mode displaced: copying immediate %s insn %.8lx displaced: copying reg %s insn %.8lx displaced: copying shifted reg %s insn %.8lx displaced: copying %sextra load/store insn %.8lx copy_extra_ld_st: instruction decode error decode/pack/unpack/saturate/reverse displaced: Unpredictable LDM or STM with base register r15 displaced: copying block transfer insn %.8lx displaced: LDM r%d%s, {..., pc}: original reg list %.4x, modified list %.4x arm_process_displaced_insn: Instruction decode error displaced: stepping insn %.8lx at %.8lx Cannot single-step exception return displaced: emulating block transfer: %s %s %s Invalid update to pc in instruction displaced: detected kernel helper at %.8lx displaced: copying Linux svc insn %.8lx displaced: found sigreturn/rt_sigreturn SVC call. PC in frame = %lx displaced: unwind pc = %lx. Setting momentary breakpoint. inferior_thread ()->step_resume_breakpoint == NULL /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/arm-linux-tdep.c displaced: couldn't find previous frame to set momentary breakpoint for sigreturn/rt_sigreturn displaced: sigreturn/rt_sigreturn SVC call not in signal trampoline frame displaced: PC is apparently %.8lx after SVC step (within scratch space) (outside scratch space) .reg2 arm_linux_copy_svc _dl_runtime_resolve _dl_fixup Load shared object library symbols for files matching REGEXP. Status of loaded shared object libraries. Unload all shared object library symbols. If "on", symbols from all shared object libraries will be loaded automatically when the inferior begins execution, when the dynamic linker informs gdb that a new library has been loaded, or when attaching to the inferior. Otherwise, symbols must be loaded manually, using `sharedlibrary'. Show autoloading of shared library symbols. Set autoloading of shared library symbols. The system root is used to load absolute shared library symbol files. For other (relative) files, you can add directories using `set solib-search-path'. This takes precedence over the environment variables PATH and LD_LIBRARY_PATH. Show the search path for loading non-absolute shared library symbol files. Set the search path for loading non-absolute shared library symbol files. Autoloading of shared library symbols is %s. The search path for loading non-absolute shared library symbol files is %s. Shared library file name is too long. Symbols already loaded for %s Error while reading shared library symbols: Error reading attached process's symbol file. Error while mapping shared library sections: No shared libraries loaded at this time. (*): Shared library is missing debugging information. No loaded shared libraries match the pattern `%s'. /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/solib.c Could not open `%s' as an executable file: %s `%s': not in executable format: %s `%s': Shared library architecture %s is not compatible with target architecture %s. nosharedlibrary auto-solib-add Show the current system root. Set an alternate system root. sysroot solib-absolute-prefix solib-search-path /libpthread Symbol file not found for %s Loaded symbols for %s Invalid regexp: %s SharedLibraryTable From from To Syms Read syms-read Shared Object Library Yes (*) Yes No No shared libraries matched. fd == -1 LD_LIBRARY_PATH solib_bfd_fopen .dynamic _r_debug ops->fetch_link_map_offsets /usr/lib/ld.so.1 /usr/lib/sparcv9/ld.so.1 .interp load_addr < space_size main_$main _r_debug_state _dl_debug_state __dl_rtld_db_dlactivity _rtld_debug_state __start /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/solib-svr4.c .dynamic section for "%s" is not at the expected address difference appears to be caused by prelink, adjusting expectations .dynamic section for "%s" is not at the expected address (wrong library or version mismatch?) Attempt to reload symbols from process? failed to read exec filename from attached file: %s Can't read pathname for load map: %s. Unable to find dynamic linker breakpoint function. GDB will be unable to debug shared library initializers and track explicitly loaded dynamic code. svr4_fetch_link_map_offsets elf_lookup_lib_symbol enable_break Load the symbols out of memory from a dynamically loaded object file. Give an expression for the address of the file's shared object file header. Could not load vsyscall page because no executable was specified try using the "file" command first. add-symbol-file-from-memory not supported for this target Failed to read a valid object file image from memory. shared object read from target memory Got object file from memory but can't read symbols: %s. add-symbol-file-from-memory requires an expression argument Must use symbol-file or exec-file before add-symbol-file-from-memory. add-symbol-file-from-memory system-supplied DSO at %s Local core dump file Thread %ld .auxv .wcookie SPU/%s SPU/%d/regs%n %s/%ld core_vec general-purpose floating-point Too many arguments No core file now. No core file specified. "%s": Can't find sections: %s Core was generated by `%s'. "%s" is not a core dump: %s .reg/ Use a core file as a target. Specify the filename of the core file. Couldn't read NT_AUXV note in core file. Couldn't read StackGhost cookie in core file. Couldn't read SPU section in core file. Couldn't find %s registers in core file. Couldn't read %s registers from `%s' section in core file. Couldn't recognize %s registers in core file. /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/corelow.c Can't fetch registers from this type of core file No core file specified. (Use `detach' to stop debugging a core file.) "%s": ambiguous core format, %d handlers match "%s": no core file handler recognizes format, using default Program terminated with signal %d, %s. |, , |- |, |, |, - . |, |, |, , get_core_register_section unsigned int sigval_t sival_int sival_ptr __pid_t __uid_t __clock_t _pad si_pid si_uid _kill si_tid si_overrun si_sigval _timer _rt si_status si_utime si_stime _sigchld si_addr _sigfault si_band si_fd _sigpoll si_signo si_errno si_code _sifields hardwire remoteflow c_cc: Hardware flow control is %s. get_tty_state failed: %s set_tty_state failed: %s Enable or disable hardware flow control (RTS/CTS) on the serial port when debugging using remote targets. Show use of hardware flow control for remote serial I/O. Set use of hardware flow control for remote serial I/O. c_iflag = 0x%x, c_oflag = 0x%x, c_cflag = 0x%x, c_lflag = 0x%x Invalid baud rate %d. Closest values are %d and %d. Invalid baud rate %d. Minimum value is %d. Invalid baud rate %d. Maximum value is %d. 2 K n , X ` % K /bin/sh tcp set tcp show tcp auto-retry connect-timeout udp: tcp: %s: unknown host TCP protocol specific variables Configure variables specific to remote TCP connections Show auto-retry on socket connect Set auto-retry on socket connect Show timeout limit for socket connection Set timeout limit for socket connection net_open: No colon in host name! 0123456789abcdef Could not find config for %s Packet too long for target. invalid remote ptid: %s remote_interrupt called Remote connection closed Remote communication error enabled The %s is %ld. remote: awatch rwatch replaylog Remote reply is too short: %s process: unknown stop reply packet: %s Stop: Sending packet: %s... putpkt: write failed Ack Nak Notification received: %s putpkt: Junk: r->regnum == regnum Timed out. Packet received: %s c == '%' qTfV qTsV qTfP qTsP qTStatus Remote failure reply: %s vStopped OK qC Packet %s (%s) is supported qSearch:memory:%s;%s; qXfer:%s:read:%s:%s,%s qXfer:%s:write:%s:%s: ,%x z%x, Z%x, vCont Too long remote packet. vFlashDone vFlashErase:%s,%s p-%x. p%x. -%x remote_threads_extra_info qThreadExtraInfo, Name: %s, State: %s, Priority: %s spu vFlashWrite: annex == NULL libraries memory-map remote_desc osdata annex != NULL readbuf != NULL annex[i] == '\0' ;S%02x ;s ;C%02x ;c remote_stop called vCont;t vCont;t: Stopping %s failed: %s Remote target Thread Thread %d.%ld qAttached:%x threads.dtd qfThreadInfo qsThreadInfo vKill;%x Can't kill process ,%d Ending remote debugging. No process to detach from. D;%x Can't detach process. Detached from remote %s. P%s= Bad result from packet_ok reg != NULL bc Still connected. Remote debugging using vFile:close: vFile:pread: vFile:open: qOffsets Text= ;Data= ;Bss= TextSeg= ;DataSeg= qSymbol:: qSymbol::%s qSymbol:%s:%s qSymbol: qSupported:multiprocess+; qSupported: qSupported:multiprocess+ qSupported QStartNoAckMode QNonStop:1 QNonStop:0 vAttach;%x Attached to %s Attaching to %s failed wait_status != NULL wait_status == NULL args != NULL R%x %s-packet extended-remote set remote show remote compare-sections remotebreak set remote interrupt-sequence interrupt-on-connect remotewritesize memory-write-packet-size memory-read-packet-size hardware-watchpoint-limit hardware-breakpoint-limit remoteaddresssize binary-download verbose-resume pass-signals QPassSignals symbol-lookup qSymbol set-register fetch-register software-breakpoint Z0 hardware-breakpoint Z1 write-watchpoint Z2 read-watchpoint Z3 access-watchpoint Z4 read-aux-vector qXfer:auxv:read qXfer:features:read library-info qXfer:libraries:read qXfer:memory-map:read read-spu-object qXfer:spu:read write-spu-object qXfer:spu:write qXfer:osdata:read qXfer:threads:read read-siginfo-object qXfer:siginfo:read write-siginfo-object qXfer:siginfo:write qGetTLSAddr reverse-continue reverse-step supported-packets search-memory qSearch:memory hostio-open vFile:open hostio-pread vFile:pread hostio-pwrite vFile:pwrite hostio-close vFile:close hostio-unlink vFile:unlink vAttach vRun noack vKill query-attached qAttached conditional-tracepoints ConditionalTracepoints fast-tracepoints FastTracepoints Z-packet Delete a remote file. hard soft Invalid %s (bad syntax). Packet size not changed. sending: received: qCRC:%lx,%lx Section %s, range %s -- %s: MIS-MATCHED! showlist Unknown remote I/O error %d Remote I/O error: %s vFile:unlink: file to delete wb file to get Error reading %s. vFile:pwrite: Successfully sent file "%s". file to put remote_filename_p (filename) Protocol error with Rcmd trace API error 0x%s. QTDisconnected:%x qTV:%x pc:%s tdp:%x range:%s:%s outside:%s:%s Unknown trace find type %d Bogus reply from target: %s QTStop QTStart QTDV:%x:%s:%x: QTDP:%x:%s:%c:%lx:%x :F%x :X%x, QTDP:-%x:%s:%s%c QTDP:-%x:%s:%s%s%s QTinit tdesc != NULL Invalid remote reply: %s PacketSize multiprocess QNonStop DisconnectedTracing ReverseContinue ReverseStep ^ _ _ ^ _ _ ^ ^ ^ _ ^ ^ ^ _ x_ ^ q_ h_ ^ a_ X_ Q_ H_ A_ 8_ ^ ^ 1_ (_ !_ _ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ _ ^ ^ _ ~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ q~ m 3 q~ q~ q~ q~ q~ q~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ [ " ` % % %& D& % Ctrl-C BREAK BREAK-g T) ?Q& P! -\' & & 0 ` N' & VEC_thread_item_t_last VEC_gdb_xml_value_s_index VEC_thread_item_t_quick_push 0123456789abcdef VEC_cached_reg_t_quick_push getpkt_or_notif_sane_1 remote_xfer_partial remote_store_registers packet_reg_from_regnum remote_fetch_registers remote_vcont_resume extended_remote_attach_1 extended_remote_run remote_bfd_iovec_open register_remote_g_packet_guess VEC_remote_g_packet_guess_s_quick_push demand_private_info hw_bp_to_z: bad watchpoint type %d /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/remote.c Reply contains invalid hex digit %d Received too much data from remote target; ignoring overflow. Unmatched escape character in target response. Remote qSupported response supplied an unexpected value for "%s". Calling remote_async when async is masked Support for the `%s' packet is auto-detected, currently %s. Support for the `%s' packet is currently %s. Packets are fixed at %ld bytes. Packets are limited to %ld bytes. Timeout in mid-packet, retrying Saw new packet start in middle of old one Timeout in checksum, retrying Communication error in checksum Bad checksum, sentsum=0x%x, csum=0x%x, buf=%s Invalid run length encoding: %s Malformed packet(a) (missing colon): %s Packet: '%s' Malformed packet(b) (missing colon): %s Packet: '%s' Remote sent bad register number %s: %s Packet: '%s' Remote register badly formatted: %s here: %s No process or thread specified in stop reply: %s Cannot execute this command while the target is running. Packet instead of Ack, ignoring it Watchdog timeout has expired. Target detached. Ignoring packet error, continuing... Bogus trace status reply from target: %s Bad register packet; fetching a new packet Remote 'g' packet reply is of odd length: %s packet_ok: attempt to use a disabled packet Protocol error: %s (%s) conflicting enabled responses. Enabled packet %s (%s) not recognized by stub Packet %s (%s) is NOT supported Pattern is too large to transmit to remote target. Unknown qSearch:memory reply: %s Unknown remote qXfer reply: %s Remote qXfer reply contained no data. remote_remove_hw_breakpoint: reached end of function remote_remove_watchpoint: reached end of function remote_insert_watchpoint: reached end of function Communication problem with target. Remote target does not support vFlashDone Error finishing flash operation Remote target does not support flash erase Error erasing flash with vFlashErase packet Remote target doesn't support qGetTLSAddr packet Remote target failed to process qGetTLSAddr request TLS not supported or disabled on this target Incomplete response to threadinfo request. ERROR RMT Thread info mismatch. ERROR RMT: threadinfo tag mismatch. ERROR RMT: length of threadid is not 16. ERROR RMT: 'exists' length too long. ERROR RMT: unknown thread info tag. remote_write_bytes_aux: bad packet format minumum packet size too small to write data binary downloading NOT suppported by target binary downloading suppported by target remote_write_bytes: bad internal state Remote target reported "%s" without a size. Remote target reported "%s" with a bad size: "%s". limiting remote suggested packet size (%d bytes) to %d remote query is only available after target open isprint (annex[i]) && annex[i] != '$' && annex[i] != '#' Invalid value for interrupt_sequence_mode: %s. Remote server does not support stopping threads Command can only be used when connected to the remote target. Remote fetch threadlist -infinite loop-. HMM: threadlist did not echo arg thread, dropping it. RMT ERROR : failed to get remote thread list. RMT ERROR: threadlist response longer than requested. remote_insert_hw_breakpoint: reached end of function Debugging a target over a serial line. Argument given to "disconnect" when remotely debugging. Argument given to "detach" when remotely debugging. Remote doesn't know how to detach Detached from remote process. Could not write registers; remote failure reply '%s' Could not write register "%s"; remote failure reply '%s' Remote 'g' packet reply is too long: %s unexpected end of 'g' packet reply Could not fetch register "%s"; remote failure reply '%s' fetch_register_using_p: early buf termination strlen (rs->buf) < get_remote_packet_size () Unexpected vCont reply in non-stop mode: %s - Can't pass signal %d to target in reverse: ignored. Remote reverse-step not supported. Remote reverse-continue not supported. To open a remote debug connection, you need to specify what serial device is attached to the remote system (e.g. /dev/ttyS0, /dev/ttya, COM1, etc.). Already connected to a remote target. Disconnect? The remote protocol may be unreliable over UDP. Some events may be lost, rendering further debugging impossible. Read returned %d, but %d bytes. Target reported unsupported offsets: %s Can not handle qOffsets TextSeg response with this symbol file Malformed response to offset query, %s empty item in "qSupported" response unrecognized item "%s" in "qSupported" response Non-stop mode requested, but remote does not support non-stop Remote refused setting non-stop mode with: %s Remote refused setting all-stop mode with: %s The target is not running (try extended-remote?) remote didn't report the current thread in non-stop mode Trace is already running on the target. This target does not support attaching to a process Attaching to %s failed with: %s Remote file name too long for run packet Argument list too long for run packet Running the default executable on the remote target failed; try "set remote exec-file"? Running "%s" on the remote target failed Remote target does not support "set remote exec-file" Remote target does not support "set args" or run Set use of remote protocol `%s' (%s) packet Show current use of remote protocol `%s' (%s) packet Remote serial target in gdb-specific protocol Use a remote computer via a serial line, using a gdb-specific protocol. Specify the serial device it is connected to (e.g. /dev/ttyS0, /dev/ttya, COM1, etc.). Extended remote serial target in gdb-specific protocol Use a remote computer via a serial line, using a gdb-specific protocol. Specify the serial device it is connected to (e.g. /dev/ttya). Remote protocol specific variables Configure various remote-protocol specific variables such as the packets being used Compare section data on target to the exec file. Argument is a single section name (default: all loaded sections). Send an arbitrary packet to a remote target. maintenance packet TEXT If GDB is talking to an inferior via the GDB serial protocol, then this command sends the string TEXT to the inferior, and displays the response packet. GDB supplies the initial `$' character, and the terminating `#' character and checksum. If set, a break, instead of a cntrl-c, is sent to the remote target. Show whether to send break if interrupted. Set whether to send break if interrupted. show remote interrupt-sequence Valid value is "Ctrl-C", "BREAK" or "BREAK-g". The default is "Ctrl-C". Show interrupt sequence to remote target. Set interrupt sequence to remote target. If set, interrupt sequence is sent to remote target. Show whether interrupt-sequence is sent to remote target when gdb connects to. Set whether interrupt-sequence is sent to remote target when gdb connects to. Set the maximum number of bytes per memory write packet (deprecated). Show the maximum number of bytes per memory write packet (deprecated). Set the maximum number of bytes per memory-write packet. Specify the number of bytes in a packet or 0 (zero) for the default packet size. The actual limit is further reduced dependent on the target. Specify ``fixed'' to disable the further restriction and ``limit'' to enable that restriction. Set the maximum number of bytes per memory-read packet. Specify the number of bytes in a packet or 0 (zero) for the default packet size. The actual limit is further reduced dependent on the target. Specify ``fixed'' to disable the further restriction and ``limit'' to enable that restriction. Show the maximum number of bytes per memory-write packet. Show the maximum number of bytes per memory-read packet. Specify a negative limit for unlimited. Show the maximum number of target hardware watchpoints. Set the maximum number of target hardware watchpoints. Show the maximum number of target hardware breakpoints. Set the maximum number of target hardware breakpoints. Show the maximum size of the address (in bits) in a memory packet. Set the maximum size of the address (in bits) in a memory packet. get-thread-local-storage-address When set, GDB will attempt to use the remote breakpoint and watchpoint packets. Show use of remote protocol `Z' packets Set use of remote protocol `Z' packets Manipulate files on the remote system Transfer files to and from the remote target system. Copy a local file to the remote system. Copy a remote file to the local system. Show the remote pathname for "run" Set the remote pathname for "run" Argument required (integer, `fixed' or `limited'). The target may not be able to correctly handle a %s of %ld bytes. Change the packet size? Send the ASCII ETX character (Ctrl-c) to the remote target to interrupt the execution of the program. send a break signal to the remote target to interrupt the execution of the program. Send a break signal and 'g' a.k.a. Magic SysRq g to the remote target to interrupt the execution of Linux kernel. command can only be used with remote target remote-packet command requires packet text as argument command cannot be used without an exec file target memory fault, section %s, range %s -- %s remote target does not support this operation One or more sections of the remote executable does not match the loaded file No loaded section named '%s'. Successfully deleted file "%s". Invalid parameters to remote delete Successfully fetched file "%s". Invalid parameters to remote get Remote write of %d bytes returned 0! Invalid parameters to remote put remote rcmd is only available after target open "monitor" command ``%s'' is too long. Target does not support this command. remote.c: error in outgoing packet. remote.c: error in outgoing packet at field #%ld. Target returns error code '%s'. Remote file name too long for trace save packet Target failed to find requested trace frame. Trace state variable name too long for tsv definition packet Fast tracepoint not valid during download Target does not support fast tracepoints, downloading %d as regular tracepoint Target does not support conditional tracepoints, ignoring tp %d cond Target does not support tracepoints. Error on target while setting tracepoints. remote_interrupt_twice called Interrupted while waiting for the program. Give up (and stop debugging it)? Duplicate g packet description added for size %d Can't send signals to this remote system. %s not sent. This used to enable the data cache for remote targets. The cache functionality is now controlled by the memory region system and the "stack-cache" flag; "remotecache" now does nothing and exists only for compatibility reasons. Show cache use for remote targets. Set cache use for remote targets. Print information on the dcache performance. With no arguments, this command prints the cache configuration and a summary of each line in the cache. Use "info dcache to dump" the contents of a given line. Usage: info dcache [linenumber] Line %d: address %s [%d hits] Dcache line width %d, maximum size %d Cache state: %d active lines, %d hits Deprecated remotecache flag is %s. remotecache dcache No data cache available. No such cache line exists. %02x Contains data for %s List the variables local to a scope Tracing of program execution without stopping the program. Print everything collected at the current tracepoint. Save the trace data to a file. Use the '-r' option to direct the target to save directly to the file, using its own filesystem. Define a trace state variable. Argument is a $-prefixed name, optionally followed by '=' and an expression that sets the initial value at the start of tracing. Delete one or more trace state variables. Arguments are the names of the variables to delete. If no arguments are supplied, delete all variables. Status of trace state variables and their values. Select a trace frame; No argument means forward by one frame; '-' means backward by one frame. Select a trace frame whose PC is outside the given range (exclusive). Usage: tfind outside addr1, addr2 Select a trace frame whose PC is in the given range (inclusive). Usage: tfind range addr1,addr2 Select a trace frame by source line. Argument can be a line number (with optional source file), a function name, or '*' followed by an address. Default argument is 'the next source line that was traced'. Select a trace frame by tracepoint number. Default is the tracepoint for the current trace frame. Select a trace frame by PC. Default is the current PC, or the PC of the current trace frame. Synonym for 'none'. De-select any trace frame and resume 'live' debugging. Select the first trace frame in the trace buffer. Display the status of the current trace data collection. Ends a list of commands or actions. Several GDB commands allow you to enter a list of commands or actions. Entering "end" on a line by itself is the normal way to terminate such a list. Note: the "end" command cannot be used at the gdb prompt. Specify single-stepping behavior at a tracepoint. Argument is number of instructions to trace in single-step mode following the tracepoint. This command is normally followed by one or more "collect" commands, to specify what to collect while single-stepping. Note: this command can only be used in a tracepoint "actions" list. Specify one or more data items to be collected at a tracepoint. Accepts a comma-separated list of (one or more) expressions. GDB will collect all data (variables, registers) referenced by that expression. Also accepts the following special arguments: $regs -- all registers. $args -- all function arguments. $locals -- all variables local to the block/function scope. Note: this command can only be used in a tracepoint "actions" list. Specify one or more expressions to be evaluated at a tracepoint. Accepts a comma-separated list of (one or more) expressions. The result of each evaluation will be discarded. Note: this command can only be used in a tracepoint "actions" list. Specify the actions to be taken at a tracepoint. Tracepoint actions may include collecting of specified data, single-stepping, or enabling/disabling other tracepoints, depending on target's capabilities. Show the list of expressions to collect by default Set the list of expressions to collect by default Use this to continue a tracing run even if GDB disconnects or detaches from the target. You can reconnect later and look at trace data collected in the meantime. Show whether tracing continues after GDB disconnects. Set whether tracing continues after GDB disconnects. Use a trace file as a target. Specify the filename of the trace file. Premature end of file while reading trace file Unknown block type '%c' (0x%x) in traceframe tfile_xfer_partial: trace file is read-only Premature end of file qwhile reading trace file This command can only be used in a tracepoint actions list. This command cannot be used at the top level. Trace can not be run on this target. Trace is running on the target. Trace will continue if GDB disconnects. Trace will stop if GDB disconnects. No trace has been run on the target. Trace stopped by a tstop command. Trace stopped because the buffer was full. Trace stopped because of disconnection. Trace stopped by tracepoint %d. Trace stopped for an unknown reason. Trace stopped for some other reason (%d). Trace buffer has %llu bytes free. Looking at trace frame %d, tracepoint %d. Not looking at any trace frame. Internal: register number %d too large for tracepoint /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/tracepoint.c Unknown block type '%c' (0x%x) in trace frame May not look at trace frames while trace is running. No current tracepoint -- please supply an argument. TFIND: No line number information available ; -- will attempt to find by PC. Attempting to find line %d instead. Line number %d is out of range for "%s". Usage: tfind outside , Usage: tfind range , already at start of trace buffer invalid input (%d is less than zero) No trace variable named "$%s", not deleting file in which to save trace data Target failed to save trace data to '%s'. Unable to open file '%s' for saving trace data (%s) status %c;%s:%x;tframes:%x;tfree:%llx Failure to get requested trace buffer data Trace data saved to file '%s'. No known tracepoint matches 'current' tracepoint #%d. Data collected at tracepoint %d, trace frame %d: requires an argument (function, line or *addr) to define a scope a constant with value %ld (0x%lx) a local variable in register $%s an argument at stack/frame offset %ld a local variable at frame offset %ld a reference argument at offset %ld the address of an argument, in register $%s Scope for %s contains no locals or arguments. Malformed trace status, at %s Status line: '%s' Assuming tracepoint %d is same as target's tracepoint %d at %s. Created tracepoint %d for target's tracepoint %d at %s. Failed to create tracepoint for target's tracepoint %d at %s, skipping it. Unrecognized char '%c' in tracepoint definition, skipping rest Trace is running. Continue tracing after detach? Delete all trace state variables? Name "%s" not prefixed with '$', ignoring '%s' is not an action that I know, or is ambiguous. constant %s (value %ld) will not be collected. %s is optimized away and cannot be collected. expression too complicated, try simplifying gdb: Internal error: expression has min height < 0 '%s': bad step-count; command ignored. '%s' is not a supported tracepoint action. Enter actions for tracepoint %d, one per line. End with a line saying just "end". Already processing 'while-stepping' %s: don't know symbol class %d constant %s (value %ld) will not be collected. LOC_STATIC %s: collect %ld bytes at %s. Sorry, don't know how to do LOC_REF_ARG yet. LOC_LOCAL %s: Collect %ld bytes at offset LOC_REGPARM_ADDR %s: Collect %ld bytes at offset %s has been optimized out of existence. Collecting registers (mask): 0x Assuming trace state variable $%s is same as target's variable %d. Created trace state variable $%s for target's variable %d. File is not a valid trace file. Ignoring trace file definition "%s" Excessively long lines in trace file No register block size recorded in trace file No traceframes present in this file. Syntax must be $NAME [ = EXPR ] Must supply a non-empty variable name Trace state variable $%s now has initial value %s. Trace state variable $%s created, with initial value %s. No tracepoints downloaded, not starting trace tdump tsave tvariable tvariables tfind tfind outside tstatus Stop trace data collection. tstop Start trace data collection. while-stepping teval actions default-collect disconnected-tracing tfile Local trace dump file Looking at a trace file. Using a trace file. Run/stop status is unknown. Collected %d trace frames. collect register %d unknown tfind type Found traceframe %d. trace_frame trace_func trace_file trace_line could not change traceframe End of trace buffer. for address Line %d of "%s" is at address but contains no code. Cannot find a good line. not debugging trace buffer -r unknown option `%s' TRACE0 R %x tsv %x:%s:%x:%s tp T%x:%s:%c:%x:%x :X%x,%s tp A%x:%s:%s tp S%x:%s:%s No current trace frame. Bad action list item: %s $reg $loc $arg Scope for %s: Symbol %s is a bogus symbol, class %d. constant bytes: %02x in static storage at address an argument in register $%s a typedef. a label at address a function at address Unresolved Static optimized out. , length %d. tframes tfree Invalid tracepoint piece malformed expression %s %s %s %s > (%d, ,%ld) LOC_REG[parm] %s: (will not collect %s) from frame ptr reg %d from reg %d Don't know LOC_UNRESOLVED %s No %s found in scope. %02X Collecting memranges: (%d, %s, %ld) M-1,%s,%lX M%X,%s,%lX X%08X, collect %s Register $%s not available OP_REGISTER: __tsv %s_%d No trace file specified. R status tp tsv trace state variable name No expression? No name given No trace state variables. Name Initial Current tunknown tnotrun tfull tdisconnected tpasscount N N N N N N pR PR Q Q jQ %q Js >s s r r r r rr ^r Hr q q q Gq 9 6 Z 0123456789abcdef VEC_tsv_s_unordered_remove VEC_tsv_s_quick_push GDB bug: ax-general.c (ax_reg): register number out of range GDB bug: ax-general.c (ax_const_d): floating point not supported yet GDB bug: ax-general.c (ax_label): label target out of range GDB bug: ax-general.c (ax_trace_quick): size out of range for trace_quick GDB bug: ax-general.c (generic_ext): bit count out of range GDB bug: ax-general.c (read_const): incomplete constant ax-general.c (ax_tsv): variable number is %d, out of range /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/ax-general.c %3d %3d %3d %s div_signed div_unsigned rem_signed rem_unsigned lsh rsh_signed rsh_unsigned trace_quick log_not bit_and bit_or bit_xor bit_not equal less_signed less_unsigned ref16 ref32 ref64 ref_float ref_double ref_long_double l_to_d d_to_l if_goto const16 const32 const64 zero_ext getv setv tracev trace16 " # $ % Translate an expression into remote agent bytecode for tracing. Translate an expression into remote agent bytecode for evaluation. Invalid type of operand to `!'. Invalid combination of types in %s. /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/ax-gdb.c Attempt to dereference a generic pointer. TYPE_CODE (value2->type) == TYPE_CODE_INT The left operand of `%s' is not a %s. Structure does not live in memory. find_field: derived classes supported find_field: anonymous unions not supported Couldn't find member named `%s' in struct/union `%s' gen_bitfield_ref: bitfield too wide gen_var_ref: LOC_CONST_BYTES symbols are not supported Cannot compute value of typedef `%s'. The variable `%s' has been optimized out. Cannot find value of botched symbol `%s'. $%s is not a trace state variable, may not assign to it May only assign to trace state variables '%s' is a pseudo-register; GDB cannot yet trace pseudoregister contents. $%s is not a trace state variable; GDB agent expressions cannot use convenience variables. Left operand of `@' must be an object in memory. Right operand of `@' must be a constant, in agent expressions. Right operand of `@' must be an integer. Right operand of `@' must be positive. Invalid type cast: intended type must be scalar. Casts to requested type are not yet implemented. gen_expr: OP_MEMVAL operand isn't an rvalue??? Invalid type of operand to `~'. Argument of unary `*' is not a pointer. Operand of `&' is an rvalue, which has no address. Operand of `&' is in a register, and has no address. pointer to a structure or union gen_expr: unhandled struct case Attempt to use a type name as an expression. Unsupported operator in expression. GDB can't do agent expression translation with overlays. First argument of `-' is a pointer, but second argument is neither an integer nor a pointer of the same type. cannot subscript requested type: cannot call user defined functions cannot subscript something of type `%s' cannot subscript requested type Argument to arithmetic operation not a number or boolean. gen_expr: op case sets don't match agent agent-eval gen_deref: expected a pointer pointer_type (value1->type) gen_fetch: strange size gen_fetch: bad type code Couldn't resolve symbol `%s'. negation structure or union no `%s' found expression to translate addition pointer_type (value2->type) subtraction multiplication division remainder bitwise and bitwise or bitwise exclusive-or less than P P x x e P : E g 7 W | U S S S S S U U U S S S S S S S S S " U S U U U U U U U U U U U U U U U U U U U j U U U U U U U U U U < ] U U U U h ? U U U U U U U U U U U U U U U U U U t U U U U h ; ? d l gen_ptrsub gen_ptrdiff gen_ptradd Set if the host system(3) call is allowed for the target. Show if the host system(3) call is allowed for the target. Garbage after "show remote system-call-allowed" command: `%s' Calling host system(3) call from target is %sallowed Illegal argument for "set remote system-call-allowed" command system-call-allowed not +- lseek rename fstat gettimeofday isatty system u i _ U I ? 5 ) 4 & P & n& ( ` & @ & & & & & & & skipping section %s... into memory (%s to %s) Failed to open %s: %s. bfd_openw_with_cleanup: %s. .newsec append binary dump binary dump tekhex dump ihex dump srec append dump Append append ihex tekhex binary Missing filename. filename != NULL No value to %s. Invalid expression. Start must be less than end. Missing start address. Missing stop address. Failed to read bfd file %s: '%s'. Restoring section %s (0x%lx to 0x%lx) restore: memory write failed (%s). bfd_openw does not work with append. bfd_openw_with_cleanup: unknown mode %s. "append binary" must be followed by a subcommand. "dump binary" must be followed by a subcommand. "dump tekhex" must be followed by a subcommand. "dump ihex" must be followed by a subcommand. "dump srec" must be followed by a subcommand. "append" must be followed by a subcommand. "dump" must be followed by a subcommand. Dump target code/data to a local file. Append target code/data to a local file. Write contents of memory to a raw binary file. Arguments are FILE START STOP. Writes the contents of memory within the range [START .. STOP) to the specifed FILE in raw target ordered bytes. Write the value of an expression to a raw binary file. Arguments are FILE EXPRESSION. Writes the value of EXPRESSION to the specified FILE in raw target ordered bytes. Write target code/data to an srec file. Write target code/data to an intel hex file. Write target code/data to a tekhex file. Write target code/data to a raw binary file. Append target code/data to a raw binary file. Write contents of memory to an srec file. Arguments are FILE START STOP. Writes the contents of memory within the range [START .. STOP) to the specifed FILE in srec format. Write the value of an expression to an srec file. Arguments are FILE EXPRESSION. Writes the value of EXPRESSION to the specified FILE in srec format. Write contents of memory to an ihex file. Arguments are FILE START STOP. Writes the contents of memory within the range [START .. STOP) to the specifed FILE in intel hex format. Write the value of an expression to an ihex file. Arguments are FILE EXPRESSION. Writes the value of EXPRESSION to the specified FILE in intel hex format. Write contents of memory to a tekhex file. Arguments are FILE START STOP. Writes the contents of memory within the range [START .. STOP) to the specifed FILE in tekhex format. Write the value of an expression to a tekhex file. Arguments are FILE EXPRESSION. Writes the value of EXPRESSION to the specified FILE in tekhex format. Write contents of memory to a raw binary file. Arguments are FILE START STOP. Writes the contents of memory within the range [START .. STOP) to the specifed FILE in binary format. Write the value of an expression to a raw binary file. Arguments are FILE EXPRESSION. Writes the value of EXPRESSION to the specified FILE in raw target ordered bytes. Append contents of memory to a raw binary file. Arguments are FILE START STOP. Writes the contents of memory within the range [START .. STOP) to the specifed FILE in raw target ordered bytes. Append the value of an expression to a raw binary file. Arguments are FILE EXPRESSION. Writes the value of EXPRESSION to the specified FILE in raw target ordered bytes. Restore the contents of FILE to target memory. Arguments are FILE OFFSET START END where all except FILE are optional. OFFSET will be added to the base address of the file (default zero). If START and END are given, only the file contents within that range (file relative) will be restored to target memory. /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/cli/cli-dump.c value is not an lval: address assumed to be zero Restore file %s offset 0x%lx start 0x%lx end 0x%lx Start address is greater than length of binary file %s. Restoring binary file %s into memory (0x%lx to 0x%lx) '%s' is not a recognized file format. Invalid memory address range (start >= end). scan_filename_with_cleanup Invalid command Warning: '%s', an alias for the command ' ' (%s) is deprecated. ' is deprecated. Use '%s'. No alternative known. Lack of needed %scommand Ambiguous %scommand "%s": %s. %s%s -- that class. List of %scommands: full documentation. Command class: %s Unclassified commands %s %s Undefined %scommand: "%s". Try "help%s%.*s". List of classes of %scommands: Type "help%s" followed by a class name for a list of commands in Type "help all" for the list of all commands. Type "help%s" followed by %scommand name Type "apropos word" to search for commands related to "word". Command name abbreviations are allowed if unambiguous. This command has a hook (or hooks) defined: This command is run after : %s (pre hook) This command is run before : %s (post hook) type == set_cmd || type == show_cmd /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/cli/cli-decode.c !aliases && !prehook && !prehookee && !posthook && ! posthookee add_set_or_show_cmd add_alias_cmd called with NULL file pointer! /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/cli/cli-script.c %s:%d: Error in sourced command file: %s arg_cleanup called with no user args. if/while commands require arguments. Recursed on a simple control type. Allocated body is smaller than this command type needs. Error reading in canned sequence of commands. Really redefine built-in command "%s"? Your new `%s' command does not hook any existing command. Type commands for definition of "%s". Missing argument %d in user function. user_args->count >= 0 && user_args->count <= 10 Invalid control type in canned commands structure. user defined function may only have %d arguments. Max user call depth exceeded -- command aborted. Error executing canned sequence of commands. bad reason name of command to define "%s" is not a prefix command. Junk in argument list: "%s" while python loop_break loop_continue Command "%s" is built-in. Type documentation for "%s". Redefine command "%s"? Command "%s" not redefined. hook- hookpost- Proceed? Not confirmed. User-defined. Control nesting too deep! while %s if %s commands %s User command "%s%s": C AC UC iC wD [E B build_command_line insert_args Maintenance commands. Some gdb commands are provided just for use by gdb maintainers. These commands are subject to frequent change, and may not be as well documented as user commands. User-defined commands. The commands in this class are those defined by the user. Use the "define" command to define a command. Specifying and examining files. Making program stop at certain points. Examining the stack. The stack is made up of stack frames. Gdb assigns numbers to stack frames counting from zero for the innermost (currently executing) frame. At any time gdb identifies one frame as the "selected" frame. Variable lookups are done with respect to the selected frame. When the program being debugged stops, gdb selects the innermost frame. The commands below can be used to select other frames by number or address. Print working directory. This is used for your program as well. Set working directory to DIR for debugger and program being debugged. The change does not take effect for the program being debugged until the next time it is started. Print a constant string. Give string as argument. C escape sequences may be used in the argument. No newline is added at the end of the argument; use "\n" if you want a newline to be printed. Since leading and trailing whitespace are ignored in command arguments, if you want to print some you must use "\" before leading whitespace to be printed or after trailing whitespace. Document a user-defined command. Give command name as argument. Give documentation on following lines. End with a line of just "end". Define a new command name. Command name is argument. Definition appears on following lines, one command per line. End with a line of just "end". Use the "document" command to give documentation for the new command. Commands defined in this way may have up to ten arguments. Read commands from a file named FILE. Optional -v switch (before the filename) causes each command in FILE to be echoed as it is executed. Note that the file "%s" is read automatically in this way when GDB is started. off == no filename extension recognition (all sourced files are GDB scripts) soft == evaluate script according to filename extension, fallback to GDB script strict == evaluate script according to filename extension, error if not supported Show mode for script filename extension recognition. Set mode for script filename extension recognition. Generic command for setting command history parameters. Generic command for showing command history parameters. Without an argument, history expansion is enabled. Show history expansion on command input. Set history expansion on command input. Generic command for showing things about the program being debugged. List the completions for the rest of the line as a command. Generic command for showing things about the debugger. Show the history of commands you typed. You can supply a command number to start with, or a `+' to start after the previous command number shown. Show what version of GDB this is. Execute nested commands WHILE the conditional expression is non zero. The conditional expression must follow the word `while' and must in turn be followed by a new line. The nested commands must be entered one per line, and should be terminated by the word `end'. Execute nested commands once IF the conditional expression is non zero. The conditional expression must follow the word `if' and must in turn be followed by a new line. The nested commands must be entered one per line, and should be terminated by the word 'else' or `end'. If an else clause is used, the same rules apply to its nested commands as to the first ones. This value is used to set the speed of the serial port when debugging using remote targets. Show baud rate for remote serial I/O. Set baud rate for remote serial I/O. When enabled, each packet sent or received with the remote target is displayed. Show debugging of remote protocol. Set debugging of remote protocol. This value is used to set the time limit for gdb to wait for a response from the target. Show timeout limit to wait for target to respond. Set timeout limit to wait for target to respond. Generic command for setting gdb debugging flags Generic command for showing gdb debugging flags Execute the rest of the line as a shell command. With no arguments, run an inferior shell. Edit specified file or function. With no argument, edits file containing most recent line listed. Editing targets can be specified in these ways: FILE:LINENUM, to edit at that line in that file, FUNCTION, to edit at the beginning of that function, FILE:FUNCTION, to distinguish among like-named static functions. *ADDRESS, to edit at the line containing that address. Uses EDITOR environment variable contents as editor (or ex as default). List specified function or line. With no argument, lists ten more lines after or around previous listing. "list -" lists the ten lines before a previous ten-line listing. One argument specifies a line, and ten lines are listed around that line. Two arguments with comma between specify starting and ending lines to list. Lines can be specified in these ways: LINENUM, to list around that line in current file, FILE:LINENUM, to list around that line in that file, FUNCTION, to list around beginning of that function, FILE:FUNCTION, to distinguish among like-named static functions. *ADDRESS, to list around the line containing that address. With two args if one is empty it stands for ten lines away from the other arg. Disassemble a specified section of memory. Default is the function surrounding the pc of the selected frame. With a /m modifier, source lines are included (if available). With a /r modifier, raw instructions in hex are included. With a single argument, the function surrounding that address is dumped. Two arguments (separated by a comma) are taken as a range of memory to dump. Run the ``make'' program using the rest of the line as arguments. Show definitions of user defined commands. Argument is the name of the user defined command. With no argument, show definitions of all user defined commands. Search for commands matching a REGEXP Show the max call depth for user-defined commands. Set the max call depth for user-defined commands. When 'on', each command is displayed as it is executed. Show state of GDB CLI command tracing. Set tracing of GDB CLI commands. The max call depth for user-defined commands is %s. Timeout limit to wait for target to respond is %s. Debugging of remote protocol is %s. Baud rate for remote serial I/O is %s. History expansion on command input is %s. Verbose printing of informational messages is %s. Script filename extension recognition is "%s". No function contains program counter for selected frame. No function contains specified address. No symbol table is loaded. Use the "file" command. Junk at end of line specification. Specified start and end are in different files. Two empty args do not say what lines to list. No source file for address %s. No default source file yet. Do "help list". "set debug" must be followed by the name of a debug subcommand. "info" must be followed by the name of an info command. The "pwd" command does not take an argument: %s Error finding name of working directory: %s Working directory %s (canonically %s). Error in regular expression:%s source command requires file name of file to source. internals Obscure features. obscure Aliases of other commands. aliases user-defined Support facilities. support Status inquiries. Examining data. Running the program. running echo document script-extension Exit gdb. Print list of commands. show history expansion inf Show all GDB settings. remotebaud remotetimeout set debug show debug shell edit make user apropos max-user-call-depth trace-commands Verbosity is %s. Argument required (%s). Not a user command. file: "%s", line number: %d Dump of assembler code for function %s: from %s to %s: End of assembler dump. Missing modifier. Invalid disassembly modifier. No frame selected. %s is in %s (%s:%d). %s is at %s:%d. No line number known for %s. SHELL Cannot execute %s: %s Fork failed No default source file yet. EDITOR /bin/ex %s +%d "%s" Working directory %s. REGEXP string is empty .py new working directory off soft strict filename to set it to. yes "on" or "off" expected. integer to set it to. integer %u out of range Undefined item: "%s". Ambiguous item "%s". unlimited optionlist "on", "off" or "auto" expected. Requires an argument. Valid arguments are %s. gdb internal error: bad var_type in do_setshow_command do_setshow_command: invalid var_auto_boolean /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/cli/cli-setshow.c gdb internal error: bad cmd_type in do_setshow_command v u v v w Cv Cv Cv Hw Hw Cv kz Cz z y y w w 0x x x x set logging Set logging options show logging Show logging options overwrite Show the logging output mode. Set the logging output mode. redirect Show the current logfile. Set the current logfile. Enable logging. Disable logging. gdb.txt Done logging to %s. Already logging to %s. set logging Copying output to %s. Redirecting output to %s. The current logfile is "%s". Currently logging to "%s". If set, logging overrides the log file. Show whether logging overwrites or appends to the log file. Set whether logging overwrites or appends to the log file. If redirect is off, output will go to both the screen and the log file. If redirect is on, output will go only to the log file. The logfile is used when directing GDB's output. Current output protocol does not support redirection The logging output mode is %s. Whether logging overwrites or appends to the log file is %s. "set logging" lets you log output to a file. Usage: set logging on [FILENAME] set logging off set logging file FILENAME set logging overwrite [on|off] set logging redirect [on|off] Future logs will be written to %s. Logs will overwrite the log file. Logs will be appended to the log file. Output will be sent only to the log file. Output will be logged and displayed. p %s=" col_name colhdr body nr_rows nr_cols /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/mi/mi-out.c command `%s' appears to be duplicated /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/mi/mi-cmds.c break-after break-condition cond break-commands break-delete delete breakpoint break-disable disable breakpoint break-enable enable breakpoint break-info info break break-insert break-list break-watch data-disassemble data-evaluate-expression data-list-changed-registers data-list-register-names data-list-register-values data-read-memory data-write-memory data-write-register-values enable-timings enable-pretty-printing environment-cd environment-directory environment-path environment-pwd exec-arguments set args exec-continue exec-finish exec-jump exec-interrupt exec-next exec-next-instruction exec-return exec-run exec-step exec-step-instruction exec-until file-exec-and-symbols file-exec-file file-list-exec-source-file file-list-exec-source-files file-symbol-file gdb-exit gdb-set gdb-show gdb-version show version inferior-tty-set inferior-tty-show list-features list-target-features stack-info-depth stack-info-frame stack-list-arguments stack-list-frames stack-list-locals stack-list-variables stack-select-frame symbol-list-lines target-attach target-detach target-disconnect target-download target-file-delete target-file-get target-file-put target-select thread-info thread-list-ids thread-select var-assign var-create var-delete var-info-path-expression var-info-expression var-info-num-children var-info-type var-list-children var-set-format var-set-frozen var-set-update-range var-set-visualizer var-show-attributes var-show-format var-update mi_cmd_inferior_tty_show inferior_tty_terminal mi_cmd_env_dir source-path mi_cmd_env_path mi_cmd_inferior_tty_show: Usage: No args mi_cmd_env_cd: Usage DIRECTORY mi_cmd_env_pwd: No arguments required mi_cmd_env_pwd: error finding name of working directory: %s PATH mi_cmd_enable_pretty_printing: no arguments allowed Unknown value for PRINT_VALUES Must be: 0 or "%s", 1 or "%s", 2 or "%s" mi_cmd_var_info_type: Usage: NAME. mi_cmd_var_info_num_children: Usage: NAME. mi_cmd_var_update: Usage: [PRINT_VALUES] NAME. mi_cmd_var_assign: Usage: NAME EXPRESSION. mi_cmd_var_assign: Variable object is not editable mi_cmd_var_assign: Could not assign expression to variable object Must specify the format as: "natural", "binary", "decimal", "hexadecimal", or "octal" Cannot specify format more than once mi_cmd_var_show_attributes: Usage: NAME. mi_cmd_var_info_expression: Usage: NAME. mi_cmd_var_show_format: Usage: NAME. -var-set-format: Usage: NAME FROZEN_FLAG. Usage: NAME VISUALIZER_FUNCTION. mi_cmd_var_set_format: Usage: NAME FORMAT. mi_cmd_var_delete: Usage: [-c] EXPRESSION. mi_cmd_var_delete: Missing required argument after '-c': variable object name mi_cmd_var_delete: Illegal variable object name mi_cmd_var_delete: Invalid option. mi_cmd_var_create: Usage: NAME FRAME EXPRESSION. mi_cmd_var_create: name of object must begin with a letter Name="%s", Frame="%s" (%s), Expression="%s" mi_cmd_var_create: unable to create variable object mi_cmd_var_list_children: Usage: [PRINT_VALUES] NAME [FROM TO] mi_cmd_var_set_update_range: Usage: VAROBJ FROM TO numchild displayhint true in_scope false invalid type_changed new_type new_num_children has_more new_children changelist natural hexadecimal octal -var-evaluate-expression Usage: [-f FORMAT] NAME Garbage at end of command noneditable attr lang Usage: NAME. path_expr Invalid flag value Variable object not found ndeleted --no-values --simple-values --all-values USAGE: %s [ [...]] breakpoint number argument "%s" is not a number. junk at the end of breakpoint number argument "%s". mi_cmd_break_watch: Missing mi_cmd_break_watch: Garbage following mi_cmd_break_watch: Unknown watchpoint type. mi_cmd_break_insert: Missing mi_cmd_break_insert: Garbage following mi_cmd_break_insert: Bad switch. /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/mi/mi-cmd-break.c breakpoint %d not found. mi_cmd_break_watch mi_cmd_break_insert , mi_cmd_stack_info_frame: No arguments required mi_cmd_stack_select_frame: Usage: FRAME_SPEC Unknown value for PRINT_VALUES: must be: 0 or "%s", 1 or "%s", 2 or "%s" /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/mi/mi-cmd-stack.c mi_cmd_stack_list_locals: Usage: PRINT_VALUES mi_cmd_stack_list_frames: Usage: [FRAME_LOW FRAME_HIGH] mi_cmd_stack_list_frames: Not enough frames in stack. mi_cmd_stack_info_depth: Usage: [MAX_DEPTH] mi_cmd_stack_list_args: Usage: PRINT_VALUES [FRAME_LOW FRAME_HIGH] mi_cmd_stack_list_args: Not enough frames in stack. unexpected what_to_list: %d Usage: PRINT_VALUES stack-args mi_cmd_file_list_exec_source_files mi_cmd_file_list_exec_source_files: Usage: No args mi_cmd_file_list_exec_source_file mi_cmd_file_list_exec_source_file: Usage: No args mi_cmd_file_list_exec_source_file: No symtab macro-info mi_cmd_disassemble mi_cmd_disassemble: Usage: ( [-f filename -l linenum [-n howmany]] | [-s startaddr -e endaddr]) [--] mixed_mode. mi_cmd_disassemble: Usage: [-f filename -l linenum [-n howmany]] [-s startaddr -e endaddr] [--] mixed_mode. mi_cmd_disassemble: Mixed_mode argument must be 0 or 1. mi_cmd_disassemble: Invalid filename. mi_cmd_disassemble: Invalid line number mi_cmd_disassemble: No function contains specified address \ 2 mi_cmd_symbol_list_lines: Usage: SOURCE_FILENAME mi_cmd_symbol_list_lines: Unknown source file name. mi_cmd_target_file_delete: Usage: REMOTE_FILE mi_cmd_target_file_put: Usage: LOCAL_FILE REMOTE_FILE mi_cmd_target_file_get: Usage: REMOTE_FILE LOCAL_FILE mi_cmd_target_file_delete mi_cmd_target_file_put mi_cmd_target_file_get M' N' N' mi2 mi3 (gdb) thread-group-exited,id="%d" thread-group-created,id="%d" *running,thread-id="%d" %s^running *running,thread-id="all" stopped-threads *stopped library-unloaded,id="%s",target-name="%s",host-name="%s" library-loaded,id="%s",target-name="%s",host-name="%s",symbols-loaded="%d" thread-exited,id="%d",group-id="%d" thread-created,id="%d",group-id="%d" /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/mi/mi-interp.c mi_cmd_interpreter_exec: Usage: -interpreter-exec interp command mi_cmd_interpreter_exec: could not find interpreter "%s" mi_cmd_interpreter_exec: interpreter "%s" does not support command execution mi_on_resume ,time={wallclock="%0.5f",user="%0.5f",system="%0.5f"} mi_cmd_enable_timings: Usage: %s {yes|no} token=`%s' command=`%s' args=`%s' Cannot specify --frame without --thread -list-target-features should be passed no arguments -list-features should be passed no arguments mi_cmd_data_evaluate_expression: Usage: -data-evaluate-expression expression mi_cmd_data_write_register_values: Usage: -data-write-register-values [...] mi_cmd_data_write_register_values: No registers. mi_cmd_data_write_register_values: No regs and values specified. mi_cmd_data_write_register_values: Regs and vals are not in pairs. mi_cmd_thread_list_ids: No arguments required. mi_cmd_thread_select: USAGE: threadnum. Usage: -target-detach [thread-group] Cannot parse thread group id '%s' /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/mi/mi-main.c Usage: -exec-continue [--reverse] [--all|--thread-group id] Target %s does not support this command. mi_cmd_data_read_memory: Usage: ADDR WORD-FORMAT WORD-SIZE NR-ROWS NR-COLS [ASCHAR]. mi_cmd_data_read_memory: invalid number of rows. mi_cmd_data_read_memory: invalid number of columns. mi_cmd_data_write_memory: Usage: [-o COLUMN_OFFSET] ADDR FORMAT WORD-SIZE VALUE. Current thread is not running. Usage: -exec-interrupt [--all|--thread-group id] mi_cmd_data_list_changed_registers: Unable to read register contents. mi_cmd_data_list_register_change: Unable to read register contents. mi_cmd_data_list_register_values: Usage: -data-list-register-values [...] only '0' and '1' are valid values for the '--recurse' option +download section-size total-size section-sent total-sent ^exit ^error,msg=" unknown error thread-selected,id="%d" Invalid thread id: %d Thread id: %d has terminated Invalid frame id: %d cli=%s run=%s Undefined mi command: (missing implementation) ^connected ^done -interpreter-exec frozen-varobjs pending-breakpoints bad register number Optimized out Thread group is empty %s %s& is_running (inferior_ptid) --reverse reverse-finish reverse-stepi reverse-nexti reverse-next --all --thread-group Thread group id not specified Invalid thread group id '%s' Already in reverse mode. mi_cmd_data_read_memory Unable to read memory. nr-bytes total-bytes next-row prev-row next-page prev-page N/A ascii mi_cmd_data_write_memory Inferior not running. Invalid MI command cores -list-thread-groups invalid group id '%s' processes Invalid thread group id '%d' -available -recurse VEC_int_quick_push VEC_osdata_item_s_quick_push mi_execute_async_cli_command .A%s^error,msg="Undefined MI command: %s" Invalid value for the '%s' option %s^error,msg="Problem parsing arguments: %s %s" --thread Duplicate '--thread' option --frame Duplicate '--frame' option --thread --frame mi_getopt_long: optind out of bounds /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/mi/mi-getopt.c %s: Option %s requires an argument %s: Unknown option ``%s'' breakpoint-hit read-watchpoint-trigger access-watchpoint-trigger function-finished location-reached watchpoint-scope end-stepping-range exited-signalled exited exited-normally signal-received \' ]' ]' $]' >]' P]' a]' r]' ]' ]' ]' ]' MAIN tui_file_get_strbuf: bad magic number /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/tui/tui-file.c tui_file_rewind: bad magic number tui_file_put: bad magic number tui_file_adjust_strbuf: bad magic number tui_file_isatty: bad magic number tui_file_flush: bad magic number tui_file_delete: bad magic number tui-switch-mode gdb-command next-keymap \C-x down info locals where $ $ !% $ (% c 9' d _' f 9' n :' r G:' s P:' u + v _' w _' (y or n) Please answer y or n. tui_exec called /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/tui/tui-interp.c 0- , , P, 0, * Cannot create pipe for readline Cannot redirect readline output Display all %d possibilities? (y or n) ^? Change the layout of windows. Usage: layout prev | next | Layout names are: src : Displays source and command windows. asm : Displays disassembly and command windows. split : Displays source, disassembly and command windows. regs : Displays register window. If existing layout is source/command or assembly/command, the register window is displayed. If the source/assembly/command (split) is displayed, the register window is displayed with the window that has current logical focus. Toggle between Source/Command and Disassembly/Command layouts. Toggle between Source/Command or Disassembly/Command and Source/Disassembly/Command layouts. Usage: layout prev | next | layout Ambiguous command input. SRC ASM SPLIT $REGS $GREGS $FREGS $SREGS PREV Invalid layout specified. %s J I I I =I data->suppress_output == 0 /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/tui/tui-out.c tui_table_begin tui reg general Display next register group. fr gr +r Register group: %s TUI commands to control the register window. Display only floating point registers. Display only general registers. Display only system registers. Display only floating point registers Display only general registers Display only special registers Scroll the registers window forward Scroll the register window backward "tui reg" must be followed by the name of a tui reg command. [ Register Values Unavailable ] Update the source window and locator to display the current execution point. No process (SingleKey) In: %s%*.*s* %s%*.*s Line: PC: set width %d set height %d Text User Interface commands. set tui TUI configuration variables show tui refresh tabset winheight wh focus fs border-kind active-border-mode Usage: w <#lines> %s (%d lines) Focus set to %s window. half half-standout bold bold-standout Refresh the terminal display. Set the width (in characters) of tab stops. Usage: tabset Set the height of a specified window. Usage: winheight [+ | -] <#lines> Window names are: src : the source window cmd : the command window asm : the disassembly window regs : the register display List of all displayed windows. Set focus to named window or next/prev window. Usage: focus { | next | prev} Valid Window names are: src : the source window asm : the disassembly window regs : the register display cmd : the command window Scroll window forward. Usage: + [win] [n] Scroll window backward. Usage: - [win] [n] Scroll window forward. Usage: < [win] [n] Scroll window backward. Usage: > [win] [n] XDB compatibility command for setting the height of a command window. Usage: w <#lines> This variable controls the border of TUI windows: space use a white space ascii use ascii characters + - | for the border acs use the Alternate Character Set Show the kind of border for TUI windows. Set the kind of border for TUI windows. This variable controls the attributes to use for the window borders: normal normal display standout use highlight mode of terminal reverse use reverse video mode half use half bright half-standout use half bright and standout mode bold use extra bright or bold bold-standout use extra bright or bold with standout mode Show the attribute mode to use for the TUI window borders. Set the attribute mode to use for the TUI window borders. This variable controls the attributes to use for the active window border: normal normal display standout use highlight mode of terminal reverse use reverse video mode half use half bright half-standout use half bright and standout mode bold use extra bright or bold bold-standout use extra bright or bold with standout mode Show the attribute mode to use for the active TUI window border. Set the attribute mode to use for the active TUI window border. The kind of border for TUI windows is "%s". The attribute mode to use for the TUI window borders is "%s". The attribute mode to use for the active TUI window border is "%s". Invalid window height specified. %s Invalid window specified. The window name specified must be valid and visible. Usage: winheight [+ | -] <#lines> %s (%d lines) Usage: focus { | next | prev} Incorrect Number of Arguments. %s Tab widths greater than 0 must be specified. "tui" must be followed by the name of a tui command. [ No Data Values Displayed ] Unable to Allocate Memory for Source or Disassembly Display. line->line_or_addr.loa == LOA_LINE || line->line_or_addr.loa == LOA_ADDRESS /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/tui/tui-winsource.c l.loa == LOA_ADDRESS || l.loa == LOA_LINE content_loa.loa == LOA_LINE || content_loa.loa == LOA_ADDRESS [ No Source Available ] [ No Assembly Available ] tui_update_breakpoint_info tui_set_is_exec_point_at Evaluate a Python command. Python scripting is not supported in this copy of GDB. This command is only a placeholder. Prefix command for python maintenance settings. Enables or disables printing of Python stack traces. Show whether Python stack will be printed on error. Enable or disable printing of Python stack dump on error. Enables or disables auto-loading of Python code when an object is opened. Show whether Python code will be auto-loaded when an object is opened. Enable or disable auto-loading of Python code when an object is opened. Python scripting is not supported in this copy of GDB. maintenance show python maintenance set python print-stack auto-load Loadable segment "%s" outside of ELF segments /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/elfread.c sect_index_rodata not initialized elf/stab section information %s without a preceding file symbol duplicated elf/stab section information for %s File "%s" has no build-id, file skipped File "%s" has a different build-id, file skipped Can't read symbols from %s: %s "%s": separate debug info file has no debug info elf/stab section information questionable for %s elf/stab section information missing for %s .stab .stab.index .mdebug Bbss.bss Ddata.data Drodata.rodata @plt .stabstr (undocumented errno %d) parse error empty character constant invalid character constant (anonymous namespace) -in- long double unsigned long unsigned long long invalid number unexpected string literal invalid character construction vtable for static_cast covariant return thunk to reference temporary for typeinfo for typeinfo fn for typeinfo name for wchar_t global constructors keyed to global destructors keyed to struct sizeof guard variable for bool enum VTT for non-virtual thunk to unsigned char unsigned short syntax error memory exhausted %s, near `%s R B B B b U T r Y Y Y Y Y Y Y Y Y Y l S S S S S S S 2 m 6 ~ G G G G G A K ] F h * 2 I ` w 1 H _ v . G > V G { G G G G G G @ t G 2 G Z v 0 Y G G % 5 G E f y 4 " , D G X o G F ] q . W > c G # 5 G M ^ v J g G ! ; X w G $ Y - D [ r * A X o G G [ T M o F o o o o o o o ? o o o [ 8 M o F o o o o o o o ? o o o 1 * # o o o o o o o o ? - ! ? ? ? ? ? ? ? ? ? ? ? ? : ? ? ? ? ? t ? 0 7 t w ? t ' ? ? ? t ? 0 B $ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? " ? ? F f ? ? ? Q ? ? ? t b ? 7 b 4 ? ? ? b ! ? ? s ? ? B t t ? ? ? A b ? ? ? 3 b 7 ? ? ? ? 8 S W [ ? ? ? ? ? K ` ? ? ? ? C ? ? d ? B n t j ! t s ? ? ? ? ? ? t ? ? ? E ? ? ? ? ? ? _ _ _ _ ? n ? ? ? ? ? ? t ? t ? t ? ? ? % ? ? ? ? ? Q Q w w 4 4 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? H ?1 I)=;* J 4+5,: D F0 / G !"#$%&'(-.236789@ABE b ' ' ' ' x ' C E ~ D # I * ' ' / . 4 * I * 1 . 5 5 = = D b F ` I U 4 ` F 4 W = | [ = = ` x = D | 1 u ~ D | m | ) = = s s G u s G D ( G | | I = I = z 4 G G 4 G 4 F ) * ) _ 9 : ; f F F ) { ) ) ) ) . ) 5 5 5 ) ) I N * I ) I ) ) U ] " % ` # & , ` | z U % ! [ e % Y $ % 6 u n o < 1 G H I 1 = D = I 1 D G I = > ? = C E D G I ! " $ % ; < = > ? 1 C % E < G H I ! " $ % 1 < G H I $ % 1 ! " < ) G H I ! " # * + - . / 0 1 2 3 4 5 6 7 8 9 ; < = > ? @ A D E G H I ! " 4 6 7 8 9 ) ; < = > ? 1 C E = D I ! " & ' ! " & ' G I , - . / 0 1 2 3 4 6 7 8 9 ; < = > ? G I C E 1 J = D G I ! " & ' ! " # * + G - . / 0 1 2 3 4 5 6 7 8 9 ; < = > ? @ A D E G H I ! " ! " , - . / 0 1 2 3 4 5 6 7 8 9 ; < = > ? C E , - . / 0 1 2 3 4 6 7 8 9 ; < = > ? C E . / 0 1 2 3 4 6 7 8 9 ; < = > ? C E / 0 1 2 3 4 6 7 8 9 ; < = > ? C E 0 1 2 3 4 6 7 8 9 ; < = > ? C E 1 2 3 4 6 7 8 9 ; < = > ? C E 2 3 4 6 7 8 9 ; < = > ? C E 8 9 ; < = > ? C E , . + x - f b V P ` y { W S } | ] Z g h n e g w z ) i Q R , U e g X i g V T ' ( Y k t g Z g b [ * ` t * t ! x " # ] y X g | Y - Z w z [ i ] > ? @ h + , y ] i ] ] V ^ j w z } ] O ) . i j 2 / 0 1 8 < 9 ] y j y * : A ; d B C l q ^ o r w z w z 4 5 p j & 7 , - 3 V ] ^ = j s t ^ j ^ ^ s ^ t X j ^ X Y Z Y ^ X Z u Y Z j / % ^ / / / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ A B C D E F G H I J K L M X Y Z s t X 6 Y Z / 0 1 $ 2 3 4 5 6 7 8 9 : ; < = > ? @ A B C D E F G H I J K L M / m ;a `cd_\[ikZmhbl 52 Cy @ =] egu D 4}A + (' $# &%"! *) - 0j 7 oX x :1B8 ? IKO|3 /,. nY r mX P X EGzv9 M HL 6Xs XWX Q p ~ J qVUTR N S KLMMMNNOOOOOPPQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQRSSSSTTTUUVVVVWWXXYYZZZZ[\\]]]]]^^^^^___``aaabbccccccddeeeeeeeffffgghhhhhhhhhhhhiiijjjjkkkkkllmmnnnnooooopppppqrrrrqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq ? ? 9 ? ? ? ? ? / ? k ? ? @ ? ? a \ v N ! _ " # $ % & a ' ~ c ( 7.1-android-gg2 x86_64-linux-gnu arm-elf-linux array-section-end elt elt-rep-end elt-rep %u frame-end frame-where frame-source-end frame-source-line frame-source-file-end frame-source-file frame-source-begin frame-args frame-function-name frame-address-end frame-address signal-handler-caller function-call arg-end arg-name-end arg-begin display-end display-value display-expression-end display-expression display-format display-number-end display-begin value-end value-history-end value-history-value error quit field-end field-value field-name-end breakpoints-table-end record breakpoints-table field %d breakpoints-headers signal signal-string-end signal-string signal-name-end signal-name signalled exited %d starting watchpoint %d catchpoint %d breakpoint %d array-section-begin %d arg-value value-begin value-history-begin %d field-begin frame-begin %d %s source middle %s:%d:%d:%s:%s error-begin thread-changed new-thread frames-invalid breakpoints-invalid stopped size >= sizeof (*n) /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/addrmap.c addrmap_relocate is not implemented yet for mutable addrmaps addrmap_find is not implemented yet for mutable addrmaps addrmap_create_fixed is not implemented yet for fixed addrmaps addrmap_fixed_set_empty: fixed addrmaps can't be changed fixed->num_transitions == num_transitions p p @ P addrmap_mutable_create_fixed addrmap_mutable_set_empty splay_obstack_alloc Display the inferior's auxiliary vector. This is information provided by the operating system at program startup. Machine-dependent CPU capability hints String identifying base platform Boolean, was exec setuid-like? Special system info/entry points System-supplied DSO's ELF header Dynamic linker's section headers String giving name of dynamic linker Canonicalized file name given to execve Dynamic linker's data segment address COFF executable file descriptor AF_SUN_ flags passed from the kernel The program has no auxiliary information now. No auxiliary vector found, or failed reading it. /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/auxv.c AT_NULL End of vector AT_IGNORE Entry should be ignored AT_EXECFD File descriptor of program AT_PHDR Program headers for program AT_PHENT Size of program header entry AT_PHNUM Number of program headers AT_PAGESZ System page size AT_BASE Base address of interpreter AT_FLAGS Flags AT_ENTRY Entry point of program AT_NOTELF Program is not ELF AT_UID Real user ID AT_EUID Effective user ID AT_GID Real group ID AT_EGID Effective group ID AT_CLKTCK Frequency of times() AT_PLATFORM String identifying platform AT_HWCAP AT_FPUCW Used FPU control word AT_DCACHEBSIZE Data cache block size AT_ICACHEBSIZE Instruction cache block size AT_UCACHEBSIZE Unified cache block size AT_IGNOREPPC AT_BASE_PLATFORM AT_RANDOM Address of 16 random bytes AT_EXECFN File name of executable AT_SECURE AT_SYSINFO AT_SYSINFO_EHDR AT_SUN_UID AT_SUN_RUID AT_SUN_GID AT_SUN_RGID AT_SUN_LDELF Dynamic linker's ELF header AT_SUN_LDSHDR AT_SUN_LDNAME AT_SUN_LPAGESZ Large pagesize AT_SUN_PLATFORM Platform name string AT_SUN_HWCAP AT_SUN_IFLUSH Should flush icache? AT_SUN_CPU CPU name string AT_SUN_EMUL_ENTRY COFF entry point address AT_SUN_EXECNAME AT_SUN_LDDATA %-4s %-20s %-30s AT_SUN_EMUL_EXECFD AT_SUN_AUXFLAGS AT_SUN_MMU String for name of MMU module Auxiliary vector is empty. _dl_auxv block % auxv_pair_size == 0 object == TARGET_OBJECT_AUXV readbuf || writebuf /proc/%d/auxv memory_xfer_auxv ld_so_xfer_auxv bfd BFD backed target You should never see this bl != NULL /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/blockframe.c get_frame_block Set ignore-count of breakpoint number N to COUNT. Usage is `ignore N COUNT'. Set commands to be executed when a breakpoint is hit. Give breakpoint number as argument after "commands". With no argument, the targeted breakpoint is the last one set. The commands themselves follow starting on the next line. Type a line containing "end" to indicate the end of them. Give "silent" as the first line to make the breakpoint silent; then no output is printed when it is hit, except what the commands print. Specify breakpoint number N to break only if COND is true. Usage is `condition N COND', where N is an integer and COND is an expression to be evaluated whenever breakpoint N is reached. Set a temporary breakpoint. Like "break" except the breakpoint is only temporary, so it will be deleted when hit. Equivalent to "break" followed by using "enable delete" on the breakpoint number. tbreak [LOCATION] [thread THREADNUM] [if CONDITION] LOCATION may be a line number, function name, or "*" and an address. If a line number is specified, break at start of code for that line. If a function is specified, break at start of code for that function. If an address is specified, break at that exact address. With no LOCATION, uses current execution address of selected stack frame. This is useful for breaking on return to a stack frame. THREADNUM is the number from "info threads". CONDITION is a boolean expression. Multiple breakpoints at one place are permitted, and useful if conditional. Do "help breakpoints" for info on other commands dealing with breakpoints. Set a hardware assisted breakpoint. Like "break" except the breakpoint requires hardware support, some target hardware may not have this support. hbreak [LOCATION] [thread THREADNUM] [if CONDITION] LOCATION may be a line number, function name, or "*" and an address. If a line number is specified, break at start of code for that line. If a function is specified, break at start of code for that function. If an address is specified, break at that exact address. With no LOCATION, uses current execution address of selected stack frame. This is useful for breaking on return to a stack frame. THREADNUM is the number from "info threads". CONDITION is a boolean expression. Multiple breakpoints at one place are permitted, and useful if conditional. Do "help breakpoints" for info on other commands dealing with breakpoints. Set a temporary hardware assisted breakpoint. Like "hbreak" except the breakpoint is only temporary, so it will be deleted when hit. thbreak [LOCATION] [thread THREADNUM] [if CONDITION] LOCATION may be a line number, function name, or "*" and an address. If a line number is specified, break at start of code for that line. If a function is specified, break at start of code for that function. If an address is specified, break at that exact address. With no LOCATION, uses current execution address of selected stack frame. This is useful for breaking on return to a stack frame. THREADNUM is the number from "info threads". CONDITION is a boolean expression. Multiple breakpoints at one place are permitted, and useful if conditional. Do "help breakpoints" for info on other commands dealing with breakpoints. Enable some breakpoints. Give breakpoint numbers (separated by spaces) as arguments. With no subcommand, breakpoints are enabled until you command otherwise. This is used to cancel the effect of the "disable" command. With a subcommand you can enable temporarily. Enable some breakpoints. Give breakpoint numbers (separated by spaces) as arguments. This is used to cancel the effect of the "disable" command. May be abbreviated to simply "enable". Enable breakpoints for one hit. Give breakpoint numbers. If a breakpoint is hit while enabled in this fashion, it becomes disabled. Enable breakpoints and delete when hit. Give breakpoint numbers. If a breakpoint is hit while enabled in this fashion, it is deleted. Disable some breakpoints. Arguments are breakpoint numbers with spaces in between. To disable all breakpoints, give no argument. A disabled breakpoint is not forgotten, but has no effect until reenabled. Disable some breakpoints. Arguments are breakpoint numbers with spaces in between. To disable all breakpoints, give no argument. A disabled breakpoint is not forgotten, but has no effect until reenabled. This command may be abbreviated "disable". Delete some breakpoints or auto-display expressions. Arguments are breakpoint numbers with spaces in between. To delete all breakpoints, give no argument. Also a prefix command for deletion of other GDB objects. The "unset" command is also an alias for "delete". Delete some breakpoints. Arguments are breakpoint numbers with spaces in between. To delete all breakpoints, give no argument. Delete some breakpoints or auto-display expressions. Arguments are breakpoint numbers with spaces in between. To delete all breakpoints, give no argument. This command may be abbreviated "delete". Clear breakpoint at specified line or function. Argument may be line number, function name, or "*" and an address. If line number is specified, all breakpoints in that line are cleared. If function is specified, breakpoints at beginning of function are cleared. If an address is specified, breakpoints at that address are cleared. With no argument, clears all breakpoints in the line that the selected frame is executing in. See also the "delete" command which clears breakpoints by number. Set breakpoint at specified line or function. break [LOCATION] [thread THREADNUM] [if CONDITION] LOCATION may be a line number, function name, or "*" and an address. If a line number is specified, break at start of code for that line. If a function is specified, break at start of code for that function. If an address is specified, break at that exact address. With no LOCATION, uses current execution address of selected stack frame. This is useful for breaking on return to a stack frame. THREADNUM is the number from "info threads". CONDITION is a boolean expression. Multiple breakpoints at one place are permitted, and useful if conditional. Do "help breakpoints" for info on other commands dealing with breakpoints. Break in function/address or break at a line in the current file. Break at a line in the current file. Status of user-settable breakpoints, or breakpoint number NUMBER. The "Type" column indicates one of: breakpoint - normal breakpoint watchpoint - watchpoint The "Disp" column contains one of "keep", "del", or "dis" to indicate the disposition of the breakpoint after it gets hit. "dis" means that the breakpoint will be disabled. The "Address" and "What" columns indicate the address and file/line number respectively. Convenience variable "$_" and default examine address for "x" are set to the address of the last breakpoint listed unless the command is prefixed with "server ". Convenience variable "$bpnum" contains the number of the last breakpoint set. Status of all breakpoints, or breakpoint number NUMBER. The "Type" column indicates one of: breakpoint - normal breakpoint watchpoint - watchpoint longjmp - internal breakpoint used to step through longjmp() longjmp resume - internal breakpoint at the target of longjmp() until - internal breakpoint used by the "until" command finish - internal breakpoint used by the "finish" command The "Disp" column contains one of "keep", "del", or "dis" to indicate the disposition of the breakpoint after it gets hit. "dis" means that the breakpoint will be disabled. The "Address" and "What" columns indicate the address and file/line number respectively. Convenience variable "$_" and default examine address for "x" are set to the address of the last breakpoint listed unless the command is prefixed with "server ". Convenience variable "$bpnum" contains the number of the last breakpoint set. Set catchpoints to catch events. Set temporary catchpoints to catch events. Catch an exception, when caught. With an argument, catch only exceptions with the given name. Catch an exception, when thrown. With an argument, catch only exceptions with the given name. Catch system calls by their names and/or numbers. Arguments say which system calls to catch. If no arguments are given, every system call will be caught. Arguments, if given, should be one or more system call names (if your system supports that), or system call numbers. Catch Ada exceptions, when raised. With an argument, catch only exceptions with the given name. Catch failed Ada assertions, when raised. With an argument, catch only exceptions with the given name. Set a watchpoint for an expression. A watchpoint stops execution of your program whenever the value of an expression changes. Set a read watchpoint for an expression. A watchpoint stops execution of your program whenever the value of an expression is read. Set a watchpoint for an expression. A watchpoint stops execution of your program whenever the value of an expression is either read or written. Synonym for ``info breakpoints''. If zero, gdb will not use hardware for new watchpoints, even if such is available. (However, any hardware watchpoints that were created before setting this to nonzero, will continue to use watchpoint hardware.) Show debugger's willingness to use watchpoint hardware. Set debugger's willingness to use watchpoint hardware. Set a tracepoint at specified line or function. trace [LOCATION] [thread THREADNUM] [if CONDITION] LOCATION may be a line number, function name, or "*" and an address. If a line number is specified, break at start of code for that line. If a function is specified, break at start of code for that function. If an address is specified, break at that exact address. With no LOCATION, uses current execution address of selected stack frame. This is useful for breaking on return to a stack frame. THREADNUM is the number from "info threads". CONDITION is a boolean expression. Multiple breakpoints at one place are permitted, and useful if conditional. Do "help breakpoints" for info on other commands dealing with breakpoints. Do "help tracepoints" for info on other tracepoint commands. Set a fast tracepoint at specified line or function. ftrace [LOCATION] [thread THREADNUM] [if CONDITION] LOCATION may be a line number, function name, or "*" and an address. If a line number is specified, break at start of code for that line. If a function is specified, break at start of code for that function. If an address is specified, break at that exact address. With no LOCATION, uses current execution address of selected stack frame. This is useful for breaking on return to a stack frame. THREADNUM is the number from "info threads". CONDITION is a boolean expression. Multiple breakpoints at one place are permitted, and useful if conditional. Do "help breakpoints" for info on other commands dealing with breakpoints. Do "help tracepoints" for info on other tracepoint commands. Status of tracepoints, or tracepoint number NUMBER. Convenience variable "$tpnum" contains the number of the last tracepoint set. Delete specified tracepoints. Arguments are tracepoint numbers, separated by spaces. No argument means delete all tracepoints. Disable specified tracepoints. Arguments are tracepoint numbers, separated by spaces. No argument means disable all tracepoints. Enable specified tracepoints. Arguments are tracepoint numbers, separated by spaces. No argument means enable all tracepoints. Set the passcount for a tracepoint. The trace will end when the tracepoint has been passed 'count' times. Usage: passcount COUNT TPNUM, where TPNUM may also be "all"; if TPNUM is omitted, passcount refers to the last tracepoint defined. Save current tracepoint definitions as a script. Use the 'source' command in another debug session to restore them. Breakpoint specific settings Configure various breakpoint-specific variables such as pending breakpoint behavior If on, an unrecognized breakpoint location will cause gdb to create a pending breakpoint. If off, an unrecognized breakpoint location results in an error. If auto, an unrecognized breakpoint location results in a user-query to see if a pending breakpoint should be created. Show debugger's behavior regarding pending breakpoints. Set debugger's behavior regarding pending breakpoints. If set, the debugger will automatically use hardware breakpoints for breakpoints set with "break" but falling in read-only memory. If not set, a warning will be emitted for such breakpoints. Show automatic usage of hardware breakpoints. Set automatic usage of hardware breakpoints. When this mode is off, breakpoints are inserted in inferior when it is resumed, and removed when execution stops. When this mode is on, breakpoints are inserted immediately and removed only when the user deletes the breakpoint. When this mode is auto (which is the default), the behaviour depends on the non-stop setting (see help set non-stop). In this case, if gdb is controlling the inferior in non-stop mode, gdb behaves as if always-inserted mode is on; if gdb is controlling the inferior in all-stop mode, gdb behaves as if always-inserted mode is off. Show mode for inserting breakpoints. Set mode for inserting breakpoints. Always inserted breakpoint mode is %s (currently %s). Always inserted breakpoint mode is %s. Automatic usage of hardware breakpoints is %s. Debugger's behavior regarding pending breakpoints is %s. Debugger's willingness to use watchpoint hardware is %s. Argument required (file name in which to save tracepoints) Unable to open file '%s' for saving tracepoints (%s) Tracepoints saved to file '%s'. save-tracepoints: no tracepoints to save. Specify the type of breakpoint to set. Usage: stop in stop at Breakpoint %d address previously adjusted from %s to %s. Breakpoint address adjusted from %s to %s. single_step_breakpoints[0] != NULL /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/breakpoint.c Watchpoint %d deleted because the program has left the block in which its expression is valid. bpstat_what: tracepoint encountered b->ops != NULL && b->ops->insert != NULL (apparently deleted?) Eventpoint %d: Hardware access (read/write) watchpoint Hardware assisted breakpoint %d Could not remove hardware watchpoint %d. b->owner->ops != NULL && b->owner->ops->remove != NULL Note: automatically using hardware breakpoints for read-only addresses. cannot set software breakpoint at readonly address %s hardware breakpoint %d not supported in overlay! Overlay breakpoint %d failed: in ROM? Temporarily disabling shared library breakpoints: Cannot insert hardware breakpoint %d. Error accessing memory address warning: inserting catchpoint %d: Could not insert hardware watchpoint %d. Could not insert hardware breakpoints: You may have requested too many hardware breakpoints/watchpoints. warning: Error removing breakpoint %d allegedly permanent breakpoint is not actually inserted another breakpoint was inserted on top of a permanent breakpoint Catchpoint %d (call to syscall %s), Catchpoint %d (returned from syscall %s), Catchpoint %d (vforked process %d), Catchpoint %d (forked process %d), Junk at end of line specification: %s No default breakpoint address now. bptypes table does not describe type #%d. b->loc == NULL || b->loc->next == NULL print_one_breakpoint: bp_none encountered No breakpoints or watchpoints. No breakpoint or watchpoint number %d. No hardware breakpoint support in the target. Hardware breakpoints used exceeds limit. Will stop next time breakpoint %d is reached. Will ignore next crossing of breakpoint %d. Will ignore next %d crossings of breakpoint %d. Temporarily disabling breakpoints for unloaded shared library "%s" Invalid thread ID specification %s. Expression cannot be implemented with read/access watchpoint. Target does not support this type of hardware watchpoint. Target can only support one kind of HW watchpoint at a time. The feature 'catch syscall' is not supported on this architeture yet. unsupported or unknown fork kind; cannot catch it single_step_breakpoints[1] == NULL Could not insert single-step breakpoint at %s No step_resume breakpoint found. Error in re-setting breakpoint %d: failed to reevaluate condition for breakpoint %d: %s bpt->related_breakpoint->related_breakpoint == bpt attempted to reset apparently deleted breakpoint #%d? Deleting unknown breakpoint type %d Make breakpoint pending on future shared library load? May not have a fast tracepoint at 0x%s%s Multiple breakpoints were set. Use the "delete" command to delete unwanted breakpoints. Unsupported or unknown exception event; cannot catch it Usage: stop in !frame_id_inlined_p (frame_id) Couldn't get information on specified line. deleted because the program has left the block in which its expression is valid. Stopped due to shared library event Thread Event Breakpoint: gdb should not stop! Overlay Event Breakpoint: gdb should not stop! Longjmp Master Breakpoint: gdb should not stop! print_bp_stop_message: unrecognized enum value reading through apparently deleted breakpoint #%d? Cannot detach breakpoints of inferior_ptid Convenience variable must have integer value. Second argument (specified ignore-count) is missing. Can't use the "commands" command among a breakpoint's commands. Unexpected extra arguments following breakpoint number. Invalid "commands" block structure. Type commands for when breakpoint %d is hit, one per line. Breakpoint %d now unconditional. bad tracepoint number at or near '%s' Tracepoint argument missing and no previous tracepoint passcount command requires an argument (count + optional TP num) Setting tracepoint %d's passcount to %d Bad breakpoint location number '%s' one or more breakpoint numbers bad breakpoint number at or near '%s' attempted to enable apparently deleted breakpoint #%d? attempted to disable apparently deleted breakpoint #%d? b->ops != NULL && b->ops->breakpoint_hit != NULL Error evaluating expression for watchpoint %d Error in testing breakpoint condition: tbreak thbreak enable enable breakpoints disable dis disa delete del clear br bre brea ba stop Break in function or address. lb tcatch tcatch Catch calls to fork. Catch calls to vfork. vfork Catch calls to exec. assert can-use-hw-watchpoints tra trac ftrace save-tracepoints set breakpoint show breakpoint pending auto-hw always-inserted Catch requires an event name. trace %s trace *0x%s passcount %d actions Catchpoint %d (exec) Catchpoint %d (vfork) Catchpoint %d (fork) unknown breakpoint type b->type == bp_catchpoint Hardware watchpoint Hardware read watchpoint hw-rwpt hw-awpt Temporary breakpoint Breakpoint Tracepoint Fast tracepoint (%s) pending. : file %s, line %d. (%d locations) Note: breakpoint Note: breakpoints (all threads) (thread %d) (permanent) (disabled) %s%s also set at pc b->owner->type != bp_none Cannot insert breakpoint %d. breakpoint #%d : %s. Warning: bl->address >= start bl->address < end , program " what " Catchpoint %d (exec'd %s), , process Temporary catchpoint Catchpoint bkptno (throw) (catch) exception throw exception catch (exception thrown), (exception caught), disp Junk after thread keyword. Unknown thread %d. Junk after task keyword. Unknown task %d. Junk at end of arguments. loc->pspace != NULL loc != NULL Empty line specification. !loc || loc_number != 0 %d.%d inf task stop only in stack frame at trace only if stop only if stop only in thread catchpoint breakpoint already hit times time times ignore next hits script pass count step count A original-location BreakpointTable Disp Enb Address What No tracepoints. sal.pspace != NULL *%s Cannot enable watchpoint %d: No breakpoint number %d. tpnum bpnum Junk at end of command. Unknown syscall name '%s'. bsp != NULL _ovly_debug_event _longjmp _siglongjmp bpt != NULL !bploc->inserted No line %d in file "%s". sals.nelts == 1 sals.nelts > 0 Garbage %s follows condition __cxa_begin_catch __cxa_throw Usage: stop at Watchpoint wpnum Temporary breakpoint Breakpoint Old value = New value = Value = a breakpoint number bad breakpoint number: '%s' Bad breakpoint argument: '%s' Junk at end of expression inverted range negative value tracepoint number No tracepoint number %d. tp != NULL %d %d Want to restore a condition Want to restore action list Bad breakpoint number '%s' No breakpoint number %d. Delete all tracepoints? Delete all breakpoints? Catchpoint %d (syscalls Catchpoint %d (syscall '%s' [%d] Catchpoint %d (any syscall) syscalls " syscall " %s%s, %s%d, Watchpoint %d deleted. safe_grow No source file specified. No breakpoint at %s. No breakpoint at this line. Deleted breakpoint Deleted breakpoints dstp keep ?deleted? hw breakpoint hw watchpoint read watchpoint acc watchpoint longjmp resume step resume watchpoint scope call dummy shlib events thread events overlay events longjmp master fast tracepoint jit events 5 {5 h5 {5 {5 U5 B5 B5 B5 {5 {5 {5 {5 {5 {5 {5 {5 {5 U5 U5 U5 {5 l9 9 9 9 9 : : : : : : 9 9 9 9 9 9 9 9 9 9 9 ; ; < : : /= D< < < : : : : : : : : : : = 0; i 9 9 Z Z Z Z 9 9 9 9 9 9 9 . . 9 9 q q % auto on bp_location_target_extensions_update remove_breakpoint remove_breakpoint_1 VEC_bp_location_p_quick_push insert_catchpoint VEC_int_index VEC_int_safe_grow VEC_int_quick_push ' ' ' ' expand_line_sal_maybe create_breakpoint add_location_to_breakpoint bp_loc_is_permanent print_one_breakpoint_location nynny ' ' ' p:' 9' ' ' ' ' ' ' ' ' # ' . ' ; ' I ' X ' ' ^ ' g ' w ' VEC_breakpoint_p_quick_push create_tracepoint_from_upload remove_single_step_breakpoints insert_single_step_breakpoint breakpoint_re_set_one delete_breakpoint VEC_bp_location_p_unordered_remove set_momentary_breakpoint set_raw_breakpoint bpstat_check_location bpstat_find_step_resume_breakpoint update_breakpoints_after_exec off /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/findvar.c That operation is not available on integers of more than %d bytes. regnum < (gdbarch_num_regs (gdbarch) + gdbarch_num_pseudo_regs (gdbarch)) frame_id_p (get_frame_id (frame)) store_typed_address: type is not a pointer or reference Cannot look up value of a typedef Value of register variable not available. Cannot look up value of a botched symbol. extract_typed_address: type is not a pointer or reference o K ; K } F address_from_register read_var_value value_of_register_lazy Force gdb to flush its register cache (maintainer command) Print the internal register configuration. Takes an optional file parameter. Print the internal register configuration including raw values. Takes an optional file parameter. Print the internal register configuration including cooked values. Takes an optional file parameter. Print the internal register configuration including each register's group. Takes an optional file parameter. /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/regcache.c regnum < regcache->descr->nr_raw_registers regnum < regcache->descr->nr_cooked_registers MAX_REGISTER_SIZE >= descr->sizeof_register[i] regcache != NULL && buf != NULL regnum >= 0 && regnum < regcache->descr->nr_raw_registers offset >= 0 && offset <= descr->sizeof_register[regnum] len >= 0 && offset + len <= descr->sizeof_register[regnum] regnum >= 0 && regnum < descr->nr_cooked_registers regnum >= 0 && regnum < descr->nr_raw_registers src->descr->gdbarch == dst->descr->gdbarch regnum >=0 && regnum < regcache->descr->nr_cooked_registers regcache_write_pc: Unable to update PC regnum >=0 && regnum < regcache->descr->nr_raw_registers regnum >= 0 && regnum < regcache->descr->nr_cooked_registers regcache_read_pc: Unable to find PC regnum >= 0 && regnum < (gdbarch_num_regs (gdbarch) + gdbarch_num_pseudo_regs (gdbarch)) src->readonly_p || dst->readonly_p regcache->descr->nr_cooked_registers == (gdbarch_num_regs (gdbarch) + gdbarch_num_pseudo_regs (gdbarch)) *%d: Inconsistent register offsets. *%d: Register type's name NULL. maintenance print architecture flushregs raw-registers cooked-registers register-groups regcache != NULL regnum >= 0 !regcache->readonly_p Bad switch read != NULL write != NULL src != NULL && dst != NULL !dst->readonly_p Register cache flushed. new_regcache->aspace != NULL src != dst %-10s Nr %4s Rel Offset %6s %5s %4d %5ld %-15s Raw value Cooked value Groups %6ld builtin_type regcache_dump init_regcache_descr regcache_raw_collect regcache_raw_supply regcache_cooked_write_part regcache_xfer_part regcache_cooked_read_part regcache_raw_write_part regcache_raw_read_part regcache_cooked_write regcache_raw_write regcache_cooked_write_unsigned regcache_cooked_write_signed regcache_cooked_read_unsigned regcache_cooked_read_signed regcache_cooked_read regcache_raw_write_unsigned regcache_raw_write_signed regcache_raw_read_unsigned regcache_raw_read_signed regcache_raw_read get_thread_arch_regcache regcache_invalidate regcache_valid_p regcache_cpy_no_passthrough regcache_cpy regcache_restore regcache_save regcache_xmalloc register_size register_type Converting character sets c >= 'A' && c <= 'F' LANGUAGE LC_ALL iconv -l The following Show the host character set. Set the host character set. host-charset Set the target character set. target-charset target-wide-charset 500V1 8859_1 8859_2 8859_3 8859_4 8859_5 8859_6 8859_7 8859_8 8859_9 10646-1:1993 ANSI_X3.4-1968 ANSI_X3.4-1986 ANSI_X3.4 ANSI_X3.110-1983 ANSI_X3.110 ARABIC7 ARMSCII-8 ASMO-708 ASMO_449 BIG-5 BIG-FIVE BIG5-HKSCS BIG5HKSCS BIGFIVE BRF BS_4730 CN-BIG5 CN-GB CP-AR CP-HU CP037 CP038 CP273 CP274 CP275 CP278 CP280 CP281 CP282 CP284 CP285 CP290 CP297 CP367 CP420 CP423 CP424 CP437 CP500 CP737 CP775 CP803 CP813 CP819 CP850 CP851 CP855 CP856 CP857 CP860 CP861 CP862 CP863 CP864 CP865 CP866 CP866NAV CP868 CP869 CP870 CP871 CP874 CP875 CP880 CP891 CP901 CP902 CP903 CP904 CP905 CP912 CP915 CP916 CP918 CP920 CP921 CP922 CP930 CP932 CP933 CP935 CP936 CP937 CP939 CP950 CP1004 CP1008 CP1025 CP1026 CP1046 CP1047 CP1070 CP1079 CP1081 CP1084 CP1089 CP1097 CP1112 CP1122 CP1123 CP1124 CP1125 CP1129 CP1130 CP1132 CP1133 CP1137 CP1140 CP1141 CP1142 CP1143 CP1144 CP1145 CP1146 CP1147 CP1148 CP1149 CP1153 CP1154 CP1155 CP1156 CP1157 CP1158 CP1160 CP1161 CP1162 CP1163 CP1164 CP1166 CP1167 CP1250 CP1251 CP1252 CP1253 CP1254 CP1255 CP1256 CP1257 CP1258 CP1282 CP1364 CP1371 CP1388 CP1390 CP1399 CP4517 CP4899 CP4909 CP4971 CP5347 CP9030 CP9066 CP9448 CP10007 CP12712 CP16804 CPIBM861 CSA7-1 CSA7-2 CSASCII CSA_T500-1983 CSA_T500 CSA_Z243.4-1985-1 CSA_Z243.4-1985-2 CSA_Z243.419851 CSA_Z243.419852 CSDECMCS CSEBCDICATDE CSEBCDICATDEA CSEBCDICCAFR CSEBCDICDKNO CSEBCDICDKNOA CSEBCDICES CSEBCDICESA CSEBCDICESS CSEBCDICFISE CSEBCDICFISEA CSEBCDICFR CSEBCDICIT CSEBCDICPT CSEBCDICUK CSEBCDICUS CSEUCKR CSEUCPKDFMTJAPANESE CSGB2312 CSHPROMAN8 CSIBM037 CSIBM038 CSIBM273 CSIBM274 CSIBM275 CSIBM277 CSIBM278 CSIBM280 CSIBM281 CSIBM284 CSIBM285 CSIBM290 CSIBM297 CSIBM420 CSIBM423 CSIBM424 CSIBM500 CSIBM803 CSIBM851 CSIBM855 CSIBM856 CSIBM857 CSIBM860 CSIBM863 CSIBM864 CSIBM865 CSIBM866 CSIBM868 CSIBM869 CSIBM870 CSIBM871 CSIBM880 CSIBM891 CSIBM901 CSIBM902 CSIBM903 CSIBM904 CSIBM905 CSIBM918 CSIBM921 CSIBM922 CSIBM930 CSIBM932 CSIBM933 CSIBM935 CSIBM937 CSIBM939 CSIBM943 CSIBM1008 CSIBM1025 CSIBM1026 CSIBM1097 CSIBM1112 CSIBM1122 CSIBM1123 CSIBM1124 CSIBM1129 CSIBM1130 CSIBM1132 CSIBM1133 CSIBM1137 CSIBM1140 CSIBM1141 CSIBM1142 CSIBM1143 CSIBM1144 CSIBM1145 CSIBM1146 CSIBM1147 CSIBM1148 CSIBM1149 CSIBM1153 CSIBM1154 CSIBM1155 CSIBM1156 CSIBM1157 CSIBM1158 CSIBM1160 CSIBM1161 CSIBM1163 CSIBM1164 CSIBM1166 CSIBM1167 CSIBM1364 CSIBM1371 CSIBM1388 CSIBM1390 CSIBM1399 CSIBM4517 CSIBM4899 CSIBM4909 CSIBM4971 CSIBM5347 CSIBM9030 CSIBM9066 CSIBM9448 CSIBM12712 CSIBM16804 CSIBM11621162 CSISO4UNITEDKINGDOM CSISO10SWEDISH CSISO11SWEDISHFORNAMES CSISO14JISC6220RO CSISO15ITALIAN CSISO16PORTUGESE CSISO17SPANISH CSISO18GREEK7OLD CSISO19LATINGREEK CSISO21GERMAN CSISO25FRENCH CSISO27LATINGREEK1 CSISO49INIS CSISO50INIS8 CSISO51INISCYRILLIC CSISO58GB1988 CSISO60DANISHNORWEGIAN CSISO60NORWEGIAN1 CSISO61NORWEGIAN2 CSISO69FRENCH CSISO84PORTUGUESE2 CSISO85SPANISH2 CSISO86HUNGARIAN CSISO88GREEK7 CSISO89ASMO449 CSISO90 CSISO92JISC62991984B CSISO99NAPLPS CSISO103T618BIT CSISO111ECMACYRILLIC CSISO121CANADIAN1 CSISO122CANADIAN2 CSISO139CSN369103 CSISO141JUSIB1002 CSISO143IECP271 CSISO150 CSISO150GREEKCCITT CSISO151CUBA CSISO153GOST1976874 CSISO646DANISH CSISO2022CN CSISO2022JP CSISO2022JP2 CSISO2022KR CSISO2033 CSISO5427CYRILLIC CSISO5427CYRILLIC1981 CSISO5428GREEK CSISO10367BOX CSISOLATIN1 CSISOLATIN2 CSISOLATIN3 CSISOLATIN4 CSISOLATIN5 CSISOLATIN6 CSISOLATINARABIC CSISOLATINCYRILLIC CSISOLATINGREEK CSISOLATINHEBREW CSKOI8R CSKSC5636 CSMACINTOSH CSNATSDANO CSNATSSEFI CSN_369103 CSPC8CODEPAGE437 CSPC775BALTIC CSPC850MULTILINGUAL CSPC862LATINHEBREW CSPCP852 CSSHIFTJIS CSUCS4 CSUNICODE CSWINDOWS31J CWI-2 CWI DEC-MCS DEC DIN_66003 DS2089 DS_2089 E13B EBCDIC-AT-DE-A EBCDIC-AT-DE EBCDIC-BE EBCDIC-BR EBCDIC-CA-FR EBCDIC-CP-AR1 EBCDIC-CP-AR2 EBCDIC-CP-BE EBCDIC-CP-CA EBCDIC-CP-CH EBCDIC-CP-DK EBCDIC-CP-ES EBCDIC-CP-FI EBCDIC-CP-FR EBCDIC-CP-GB EBCDIC-CP-GR EBCDIC-CP-HE EBCDIC-CP-IS EBCDIC-CP-IT EBCDIC-CP-NL EBCDIC-CP-NO EBCDIC-CP-ROECE EBCDIC-CP-SE EBCDIC-CP-TR EBCDIC-CP-US EBCDIC-CP-WT EBCDIC-CP-YU EBCDIC-CYRILLIC EBCDIC-DK-NO-A EBCDIC-DK-NO EBCDIC-ES-A EBCDIC-ES-S EBCDIC-ES EBCDIC-FI-SE-A EBCDIC-FI-SE EBCDIC-FR EBCDIC-GREEK EBCDIC-INT EBCDIC-INT1 EBCDIC-IS-FRISS EBCDIC-IT EBCDIC-JP-E EBCDIC-JP-KANA EBCDIC-PT EBCDIC-UK EBCDIC-US EBCDICISFRISS ECMA-114 ECMA-118 ECMA-128 ECMA-CYRILLIC ELOT_928 EUC-CN EUC-JISX0213 EUC-JP-MS EUC-JP EUC-KR EUC-TW EUCCN EUCJP-MS EUCJP-OPEN EUCJP-WIN EUCJP EUCTW GB13000 GB18030 GBK GB_1988-80 GB_198880 GEORGIAN-ACADEMY GEORGIAN-PS GOST_19768-74 GOST_19768 GOST_1976874 GREEK-CCITT GREEK7-OLD HP-GREEK8 HP-ROMAN8 HP-ROMAN9 HP-THAI8 HP-TURKISH8 HPGREEK8 HPROMAN9 HPTHAI8 HPTURKISH8 IBM-803 IBM-856 IBM-901 IBM-902 IBM-921 IBM-922 IBM-930 IBM-932 IBM-933 IBM-935 IBM-937 IBM-939 IBM-943 IBM-1008 IBM-1025 IBM-1046 IBM-1047 IBM-1097 IBM-1112 IBM-1122 IBM-1123 IBM-1124 IBM-1129 IBM-1130 IBM-1132 IBM-1133 IBM-1137 IBM-1140 IBM-1141 IBM-1142 IBM-1143 IBM-1144 IBM-1145 IBM-1146 IBM-1147 IBM-1148 IBM-1149 IBM-1153 IBM-1154 IBM-1155 IBM-1156 IBM-1157 IBM-1158 IBM-1160 IBM-1161 IBM-1162 IBM-1163 IBM-1164 IBM-1166 IBM-1167 IBM-1364 IBM-1371 IBM-1388 IBM-1390 IBM-1399 IBM-4517 IBM-4899 IBM-4909 IBM-4971 IBM-5347 IBM-9030 IBM-9066 IBM-9448 IBM-12712 IBM-16804 IBM256 IBM367 IBM437 IBM775 IBM813 IBM819 IBM848 IBM850 IBM852 IBM862 IBM866NAV IBM874 IBM875 IBM912 IBM915 IBM916 IBM920 IBM1004 IBM1046 IBM1047 IBM1089 IBM1162 IEC_P27-1 IEC_P271 INIS-8 INIS-CYRILLIC ISIRI-3342 ISIRI3342 ISO-2022-CN-EXT ISO-2022-CN ISO-2022-JP-2 ISO-2022-JP-3 ISO-2022-JP ISO-2022-KR ISO-8859-1 ISO-8859-2 ISO-8859-3 ISO-8859-4 ISO-8859-5 ISO-8859-6 ISO-8859-7 ISO-8859-8 ISO-8859-9 ISO-8859-9E ISO-8859-10 ISO-8859-11 ISO-8859-13 ISO-8859-14 ISO-8859-15 ISO-8859-16 ISO-10646 ISO-CELTIC ISO-IR-4 ISO-IR-6 ISO-IR-8-1 ISO-IR-9-1 ISO-IR-10 ISO-IR-11 ISO-IR-14 ISO-IR-15 ISO-IR-16 ISO-IR-17 ISO-IR-18 ISO-IR-19 ISO-IR-21 ISO-IR-25 ISO-IR-27 ISO-IR-37 ISO-IR-49 ISO-IR-50 ISO-IR-51 ISO-IR-54 ISO-IR-55 ISO-IR-57 ISO-IR-60 ISO-IR-61 ISO-IR-69 ISO-IR-84 ISO-IR-85 ISO-IR-86 ISO-IR-88 ISO-IR-89 ISO-IR-90 ISO-IR-92 ISO-IR-98 ISO-IR-99 ISO-IR-100 ISO-IR-101 ISO-IR-103 ISO-IR-109 ISO-IR-110 ISO-IR-111 ISO-IR-121 ISO-IR-122 ISO-IR-126 ISO-IR-127 ISO-IR-138 ISO-IR-139 ISO-IR-141 ISO-IR-143 ISO-IR-144 ISO-IR-148 ISO-IR-150 ISO-IR-151 ISO-IR-153 ISO-IR-155 ISO-IR-156 ISO-IR-157 ISO-IR-166 ISO-IR-179 ISO-IR-193 ISO-IR-197 ISO-IR-199 ISO-IR-203 ISO-IR-209 ISO-IR-226 ISO646-CA ISO646-CA2 ISO646-CN ISO646-CU ISO646-DE ISO646-DK ISO646-ES ISO646-ES2 ISO646-FI ISO646-FR ISO646-FR1 ISO646-GB ISO646-HU ISO646-IT ISO646-JP-OCR-B ISO646-JP ISO646-KR ISO646-NO ISO646-NO2 ISO646-PT ISO646-PT2 ISO646-SE ISO646-SE2 ISO646-US ISO646-YU ISO2022CNEXT ISO6937 ISO8859-1 ISO8859-2 ISO8859-3 ISO8859-4 ISO8859-5 ISO8859-6 ISO8859-7 ISO8859-8 ISO8859-9 ISO8859-9E ISO8859-10 ISO8859-11 ISO8859-13 ISO8859-14 ISO8859-15 ISO8859-16 ISO11548-1 ISO88591 ISO88592 ISO88593 ISO88594 ISO88595 ISO88596 ISO88597 ISO88598 ISO88599 ISO88599E ISO885910 ISO885911 ISO885913 ISO885914 ISO885915 ISO885916 ISO_646.IRV:1991 ISO_2033-1983 ISO_2033 ISO_5427-EXT ISO_5427 ISO_5427:1981 ISO_5427EXT ISO_5428 ISO_5428:1980 ISO_6937-2 ISO_6937-2:1983 ISO_6937 ISO_6937:1992 ISO_8859-1 ISO_8859-1:1987 ISO_8859-2 ISO_8859-2:1987 ISO_8859-3 ISO_8859-3:1988 ISO_8859-4 ISO_8859-4:1988 ISO_8859-5 ISO_8859-5:1988 ISO_8859-6 ISO_8859-6:1987 ISO_8859-7 ISO_8859-7:1987 ISO_8859-7:2003 ISO_8859-8 ISO_8859-8:1988 ISO_8859-9 ISO_8859-9:1989 ISO_8859-9E ISO_8859-10 ISO_8859-10:1992 ISO_8859-14 ISO_8859-14:1998 ISO_8859-15 ISO_8859-15:1998 ISO_8859-16 ISO_8859-16:2001 ISO_9036 ISO_10367-BOX ISO_10367BOX ISO_11548-1 ISO_69372 JIS_C6220-1969-RO JIS_C6229-1984-B JIS_C62201969RO JIS_C62291984B JOHAB JS JUS_I.B1.002 KOI-7 KOI-8 KOI8-R KOI8-RU KOI8-T KOI8-U KOI8 KOI8U L1 L2 L3 L5 L6 L10 LATIN-9 LATIN-GREEK-1 LATIN-GREEK LATIN7 LATIN8 LATIN10 MAC-CENTRALEUROPE MAC-IS MAC-SAMI MAC-UK MAC MACIS MACUK MACUKRAINIAN MIK MS-ANSI MS-ARAB MS-CYRL MS-EE MS-GREEK MS-HEBR MS-MAC-CYRILLIC MS-TURK MS932 MS936 MSCP949 MSCP1361 MSMACCYRILLIC MSZ_7795.3 MS_KANJI NATS-DANO NATS-SEFI NC_NC0010 NC_NC00-10 NC_NC00-10:81 NF_Z_62-010 NF_Z_62-010_(1973) NF_Z_62-010_1973 NF_Z_62010 NF_Z_62010_1973 NS_4551-1 NS_4551-2 NS_45511 NS_45512 OS2LATIN1 OSF00010001 OSF00010002 OSF00010003 OSF00010004 OSF00010005 OSF00010006 OSF00010007 OSF00010008 OSF00010009 OSF0001000A OSF00010020 OSF00010100 OSF00010101 OSF00010102 OSF00010104 OSF00010105 OSF00010106 OSF00030010 OSF0004000A OSF0005000A OSF05010001 OSF100201A4 OSF100201A8 OSF100201B5 OSF100201F4 OSF100203B5 OSF1002011C OSF1002011D OSF1002035D OSF1002035E OSF1002035F OSF1002036B OSF1002037B OSF10010001 OSF10010004 OSF10010006 OSF10020025 OSF10020111 OSF10020115 OSF10020116 OSF10020118 OSF10020122 OSF10020129 OSF10020352 OSF10020354 OSF10020357 OSF10020359 OSF10020360 OSF10020364 OSF10020365 OSF10020366 OSF10020367 OSF10020370 OSF10020387 OSF10020388 OSF10020396 OSF10020402 OSF10020417 PT154 RK1048 RUSCII SEN_850200_B SEN_850200_C SHIFT-JIS SHIFT_JIS SHIFT_JISX0213 SJIS-OPEN SJIS-WIN SJIS SS636127 STRK1048-2002 ST_SEV_358-88 T.61-8BIT T.61 T.618BIT TCVN-5712 TCVN TCVN5712-1 TCVN5712-1:1993 TIS-620 TIS620-0 TIS620.2529-1 TIS620.2533-0 TIS620 TS-5881 TSCII UCS-2 UCS-2BE UCS-2LE UCS-4 UCS-4BE UCS-4LE UCS2 UHC UJIS UNICODEBIG UNICODELITTLE US-ASCII UTF-7 UTF-8 UTF-16 UTF-16BE UTF-16LE UTF-32 UTF-32BE UTF-32LE UTF7 UTF16 UTF16BE UTF16LE UTF32 UTF32BE UTF32LE VISCII WCHAR_T WIN-SAMI-2 WINBALTRIM WINDOWS-31J WINDOWS-874 WINDOWS-936 WINDOWS-1250 WINDOWS-1251 WINDOWS-1252 WINDOWS-1253 WINDOWS-1254 WINDOWS-1255 WINDOWS-1256 WINDOWS-1257 WINDOWS-1258 WINSAMI2 WS2 not necessarily the FROM and TO listed with several The target wide character set is "%s". The target character set is "%s". The host character set is "auto; currently %s". The host character set is "%s". Cannot convert between character sets `%s' and `%s' Internal error while converting character sets Could not convert character to `%s' character set /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/charset.c The `host character set' is the one used by the system GDB is running on. The `target character set' is the one used by the program being debugged. You may only use supersets of ASCII for your host character set; GDB does not support any others. To see a list of the character sets GDB supports, type `set charset '. Show the host and target character sets. Set the host and target character sets. The `host character set' is the one used by the system GDB is running on. You may only use supersets of ASCII for your host character set; GDB does not support any others. To see a list of the character sets GDB supports, type `set host-charset '. The `target character set' is the one used by the program being debugged. GDB translates characters and strings between the host and target character sets as needed. To see a list of the character sets GDB supports, type `set target-charset' Show the target character set. The `target wide character set' is the one used by the program being debugged. In particular it is the encoding used by `wchar_t'. GDB translates characters and strings between the host and target character sets as needed. To see a list of the character sets GDB supports, type `set target-wide-charset' Show the target wide character set. Set the target wide character set. VEC_char_ptr_quick_push ( 8( 8( 8( host_hex_value func-name >: inst asm_insns src_and_asm_line line_asm_insn dummy-frames id= /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/dummy-frame.c Print the contents of the internal dummy-frame stack. maintenance print dummy-frames A( dummy_frame_prev_register dummy_frame_this_id dummy_frame_pop pL L K Too many arguments in command `%s' -> `%s'. prev != NULL Canceled No current source file. Current source file is %s Compilation directory is %s Located in %s Contains %d line%s. Source language is %s. Includes Does not include %s preprocessor macro info. Source directories searched: $cdir%c$cwd forward-search reverse-search listsize substitute-path (mode & O_CREAT) == 0 string != NULL $cdir %d %s in %d ^%c starts at address and ends at Warning: %s is not a directory. .h <> Expression not found Expression not found List of all source path substitution rules: Source path substitution rule matching `%s': /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/source.c Incorrect usage, too many arguments in command Delete all source path substitution rules? No substitution rule defined for `%s' Number of source lines gdb will list by default is %s. Compiled with %s debugging format. Incorrect usage, too few arguments in command First argument must be at least one character long Add directory DIR to beginning of search path for source files. Forget cached info on source file locations and line positions. DIR can also be $cwd for the current working directory, or $cdir for the directory in which the source file was compiled into object code. With no argument, reset the search path to $cdir:$cwd, the default. Current search path for finding source files. $cwd in the path means the current working directory. $cdir in the path means the compilation directory of the source file. Information about the current source file. Core addresses of the code for a source line. Line can be specified as LINENUM, to list around that line in current file, FILE:LINENUM, to list around that line in that file, FUNCTION, to list around beginning of that function, FILE:FUNCTION, to distinguish among like-named static functions. Default is to describe the last source line that was listed. This sets the default address for "x" to the line's first instruction so that "x/i" suffices to start examining the machine code. The address is also stored as the value of "$_". Search for regular expression (see regex(3)) from last line listed. The matching line number is also stored as the value of "$_". Search backward for regular expression (see regex(3)) from last line listed. The matching line number is also stored as the value of "$_". Show number of source lines gdb will list by default. Set number of source lines gdb will list by default. Usage: set substitute-path FROM TO Add a substitution rule replacing FROM into TO in source file names. If a substitution rule was previously set for FROM, the old rule is replaced by the new one. Usage: unset substitute-path [FROM] Delete the rule for substituting FROM in source file names. If FROM is not specified, all substituting rules are deleted. If the debugger cannot find a rule for FROM, it will display a warning. Usage: show substitute-path [FROM] Print the rule for substituting FROM in source file names. If FROM is not specified, print all substitution rules. Source file is more recent than executable. Line number %d out of range; %s has %d lines. No line number information available Line number %d is out of range for "%s". Reinitialize source path to empty? select_source_symtab: readin pst found and no symtabs. Can't find a default source file delete_substitute_path_rule find_source_lines openp Debugger convenience ("$foo") variables. These variables are created when you assign them values; thus, "print $foo=1" gives "$foo" the value 1. Values may be any type. A few convenience variables are given values automatically: "$_"holds the last address examined with "x" or "info lines", "$__" holds the contents of the last address examined with "x". Elements of value history around item number IDX (or last ten). Initialize a convenience variable if necessary. init-if-undefined VARIABLE = EXPRESSION Set an internal VARIABLE to the result of the EXPRESSION if it does not exist or does not contain a value. The EXPRESSION is not evaluated if the VARIABLE is already initialized. Placeholder command for showing help on convenience functions. Init-if-undefined requires an assignment expression. The first parameter to init-if-undefined should be a GDB variable. Unexpected type (%d) encountered for integer constant. Value does not fit in %d bits. VALUE_LVAL (func) == lval_internalvar /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/value.c VALUE_LVAL (val) == lval_internalvar value->lval != lval_internalvar && value->lval != lval_internalvar_component VALUE_LVAL (v) == lval_computed static field's value depends on the current frame - bad debug info? Value can't be converted to integer. Invalid floating value found in program. Unexpected type encountered for floating constant. Cannot overwrite convenience function %s No debugger convenience variables now defined. Convenience variables have names starting with "$"; use "set" as in "set $foo = 5" to define them. History does not go back to $$%d. History has not yet reached $%d. convenience init-if-undefined function Function return type unknown. val->reference_count > 0 set_internalvar_component bad kind $%s = The history is empty. . . : > call_internal_function value_internal_function_name set_internalvar value_free set_value_address value_computed_closure value_computed_funcs _Can't get dimensions for a non-array type tuple range index out of range Attempt to take address of register or constant. Attempt to take address of value not located in memory. Value of register %s not available. don't know which variant you want to set (power)set type with unknown size POWERSET tuple elements of different mode incompatible POWERSET tuple elements POWERSET tuple element out of range no 'respondsTo:' or 'respondsToSelector:' method no 'methodFor:' or 'methodForSelector:' method Target does not respond to this message selector. method address has symbol information with non-function type; skipping Expression of type other than "method returning ..." used as a method Non-pointer-to-member value used in pointer-to-member construct No symbol "%s" in namespace "%s". TYPE_CODE (type) == TYPE_CODE_STRUCT || TYPE_CODE (type) == TYPE_CODE_UNION /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/eval.c Call to overloaded function %s requires `this' pointer Cannot evaluate function -- may be inlined Expression of type other than "Function returning ..." used as function Cannot perform substring on this type TYPE_CODE (value_type (arg2)) == TYPE_CODE_PTR non-pointer-to-member value used in pointer-to-member construct ':' operator used in invalid context Too many subscripts for F77 (%d Max) Non-integral right operand for "@" operator. Attempt to dereference pointer to member without an object Attempt to take contents of a non-pointer value. Attempt to use a type name as an expression GDB does not (yet) know how to evaluate that kind of expression Internal error in eval_type. tuple index out of range There is no field named %s Register $%s not available. there is no field named %s too many initializers Too many array elements empty POWERSET tuple range objc_msg_lookup respondsToSelector: respondsTo: methodForSelector: methodFor: structure structure pointer Wrong number of subscripts nargs > 0 self Z / / / / / / n / / / ~ | W / K K / + @ B + T j L B # F & # B X evaluate_subexp_standard Show overload resolution in evaluating C++ functions. Set overload resolution in evaluating C++ functions. Overload resolution in evaluating C++ functions is %s. cannot take slice of non-array slice from bad array or bitstring internal error accessing bitstring current stack frame does not contain a variable named `%s' name of destructor must equal name of class Overloaded method instance %s, # of parms %d Overloaded function instance %s # of parms %d Overload resolution champion is %d, ambiguous? %d qualified_name[next_namespace_len] == ':' /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/valops.c field %s is nonexistent or has been optimised out array elements must all be the same size No frame is currently executing in block %s. No frame is currently executing in specified block Address of symbol "%s" is unknown. Address requested for identifier "%s" which is in register $%s Can't take address of "%s" which isn't an lvalue. Only values in memory can be extended with '@'. Invalid number %d of repetitions. Couldn't retrieve complete object of RTTI type %s; object may be in register(s). Attempt to extract a component of a value that is not a struct or union (TYPE_CODE (t1) == TYPE_CODE_STRUCT || TYPE_CODE (t1) == TYPE_CODE_UNION) && !!"Precondition is that type is of STRUCT or UNION kind." (TYPE_CODE (t2) == TYPE_CODE_STRUCT || TYPE_CODE (t2) == TYPE_CODE_UNION) && !!"Precondition is that value is of STRUCT or UNION kind" !gdbarch_convert_register_p (get_frame_arch (frame), regnum, type) { value_fetch_lazy (frame=%d,regnum=%d(%s),...) "%s" exists in this program but is not a function. evaluation of this expression requires the target program to be active evaluation of this expression requires the program to have a function "%s". No memory available to program now: you need to start the target first No memory available to program: call to malloc failed Internal error: non-aggregate type to value_struct_elt_for_reference static field %s has been optimized out pointers to bitfield members not allowed Cannot reference non-static field "%s" no member function matches that type instantiation non-unique member `%s' requires type instantiation Cannot reference virtual member function "%s" non-aggregate type in value_aggregate_elt TYPE_DOMAIN_TYPE (fns_ptr[0].type) != NULL Cannot resolve method %s%s%s to any overloaded instance Cannot resolve function %s to any overloaded instance Using non-standard conversion to match method %s%s%s to supplied arguments Using non-standard conversion to match function %s to supplied arguments TYPE_CODE (check_typedef (value_type (v2))) == TYPE_CODE_STRUCT && !!"Why did coercion fail?" cannot resolve overloaded method `%s': no arguments supplied Attempt to extract a component of a value that is not a %s. Cannot take address of method %s. There is no member or method named %s. One of the arguments you tried to pass to %s could not be converted to what the function wants. Structure has no component named %s. array element type size does not divide object size in cast cannot cast non-number to complex Argument to dynamic_cast must be a pointer or reference type Argument to dynamic_cast must be pointer to class or `void *' Argument to dynamic_cast does not have pointer type Argument to dynamic_cast does not have pointer to class type Argument to dynamic_cast does not have class type Couldn't determine value's most derived type for dynamic_cast Left operand of assignment is not a modifiable lvalue. Can't handle bitfields which don't fit in a %d bit word. Value being assigned to is no longer active. Left operand of assignment is not an lvalue. overload-resolution slice out of range no frame selected no `%s' in nameless context no args, no `%s' `%s' argument unreadable ...Badness @ %d : %d new_oload_champ != -1 virtual baseclass botch bad array bounds (%d, %d) regname && *regname type != NULL && v2 != NULL value_lazy (val) value_offset (val) == 0 Unexpected lazy value type. Not a numeric type. malloc Couldn't find method %s%s%s typecmp: no argument list There is no member named %s. code1 != TYPE_CODE_REF value truncated Invalid cast. Ambiguous dynamic_cast dynamic_cast failed Invalid reinterpret_cast 5e g g f he f find_overload_match find_oload_champ_namespace_loop address_of_variable value_fetch_lazy value_cast value_cast_structs value_cast_pointers Second argument of 'IN' has wrong type First argument of 'IN' has wrong type First argument of 'IN' not in range Argument to complement operation not an integer or boolean. Argument to negate operation not a number. Argument to positive operation not a number. TYPE_CODE (type1) == TYPE_CODE_DECFLOAT || TYPE_CODE (type2) == TYPE_CODE_DECFLOAT /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/valarith.c Mixing decimal floating types with other floating types is not allowed. Don't know how to convert from %s to %s. Operation not valid for decimal floating point number. Cannot perform exponentiation: %s Integer-only operation on floating point number. Invalid operation on booleans. Attempt to raise 0 to negative power. Invalid binary operation on numbers. Invalid type combination in ordering comparison. Invalid type combination in equality test. unimplemented support for bitstring/boolean repeats can't repeat values of that type Strings can only be concatenated with other strings. Bitstrings or booleans can only be concatenated with other bitstrings or booleans. unimplemented support for bitstring/boolean concatenation. illegal operands for concatenation. Can't do that unary op on that type Invalid unary operation specified. Can't do that binary op on that type Invalid binary operation specified. TYPE_CODE (bitstring_type) == TYPE_CODE_BITSTRING TYPE_CODE (type1) == TYPE_CODE_PTR TYPE_CODE (type2) == TYPE_CODE_PTR First argument of `-' is a pointer and second argument is neither an integer nor a pointer of the same type. Type size unknown, assuming 1. Try casting to a known type, or void *. TYPE_CODE (ptr_type) == TYPE_CODE_PTR Cannot perform pointer math on incomplete types, try casting to a known type, or void *. Cannot perform pointer math on incomplete type "%s", try casting to a known type, or void *. array or string index out of range Division by zero member function %s not found bitstring index out of range no such vector element not an array or string w x x x y w w w w w w w w w w w w w w w w w w w x x /x 3v ~ ~ ~ q~ .~ } } } S} &} } | | | i| 2| | { { 3v 3v 3v 3v z z 3z 3v 3v 3v q~ y y y .y z 3v } T A # ~ c < R % 3v 3v 3v 3v 3v 3v 3v _ o ] G _ w d o z * 9 H S b q value_args_as_decimal value_bitstring_subscript value_ptrdiff find_size_for_pointer_math set print show print null-stop repeats pretty Set prettyprinting of arrays. Show printing of addresses. Set printing of addresses. input-radix output-radix array-indexes %1d Printing of addresses is %s. Value out of range. %.9g %.17g %.35Lg [ #%d Generic command for setting how things print. Generic command for showing print settings. "set print elements 0" causes there to be no limit. Show limit on string chars or array elements to print. Set limit on string chars or array elements to print. Show printing of char arrays to stop at first null char. Set printing of char arrays to stop at first null char. "set print repeats 0" causes all elements to be individually printed. Show threshold for repeated print elements. Set threshold for repeated print elements. Show prettyprinting of structures. Set prettyprinting of structures. Show printing of unions interior to structures. Set printing of unions interior to structures. Show prettyprinting of arrays. Show default input radix for entering numbers. Set default input radix for entering numbers. Show default output radix for printing of values. Set default output radix for printing of values. Set default input and output number radices. Use 'set input-radix' or 'set output-radix' to independently set each. Without an argument, sets both radices back to the default value of 10. Show the default input and output number radices. Use 'show input-radix' or 'show output-radix' to independently show each. Show printing of array indexes Set printing of array indexes. Printing of unions interior to structures is %s. Prettyprinting of arrays is %s. Prettyprinting of structures is %s. Printing of char arrays to stop at first null char is %s. Threshold for repeated print elements is %s. Printing of array indexes is %s. Default output radix for printing of values is %s. Default input radix for entering numbers is %s. Limit on string chars or array elements to print is %s. Input and output radices set to decimal %u, hex %x, octal %o. Input radix set to decimal %u, hex %x, octal %o. Output radix set to decimal %u, hex %x, octal %o. Unsupported output radix ``decimal %u''; output radix unchanged. Output radix now set to decimal %u, hex %x, octal %o. Nonsense input radix ``decimal %u''; input radix unchanged. Input radix now set to decimal %u, hex %x, octal %o. Input and output radices now set to decimal %u, hex %x, octal %o. "set print" must be followed by the name of a print subcommand. Internal error in octal conversion; /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/valprint.c unable to get bounds of array, assuming null array unable to get low bound of array, using zero as default 3 3 3 3 3 3 3 3 3 3 3 3 3 3 * 3 [ W Describe where symbol SYM is stored. Describe what symbol is at location ADDR. Only for symbols with fixed locations (global or static scope). Examine memory: x/FMT ADDRESS. ADDRESS is an expression for the memory address to examine. FMT is a repeat count followed by a format letter and a size letter. Format letters are o(octal), x(hex), d(decimal), u(unsigned decimal), t(binary), f(float), a(address), i(instruction), c(char) and s(string). Size letters are b(byte), h(halfword), w(word), g(giant, 8 bytes). The specified number of objects of the specified size are printed according to the format. Defaults for format and size letters are those previously used. Default count is 1. Default address is following last thing printed with this command or "print". Expressions to display when program stops, with code numbers. Cancel some expressions to be displayed when program stops. Arguments are the code numbers of the expressions to stop displaying. No argument means cancel all automatic-display expressions. "delete display" has the same effect as this command. Do "info display" to see current list of code numbers. Print value of expression EXP each time the program stops. /FMT may be used before EXP as in the "print" command. /FMT "i" or "s" or including a size-letter is allowed, as in the "x" command, and then EXP is used to get the address to examine and examining is done as in the "x" command. With no argument, display all currently requested auto-display expressions. Use "undisplay" to cancel display requests previously made. Enable some expressions to be displayed when program stops. Arguments are the code numbers of the expressions to resume displaying. No argument means enable all automatic-display expressions. Do "info display" to see current list of code numbers. Disable some expressions to be displayed when program stops. Arguments are the code numbers of the expressions to stop displaying. No argument means disable all automatic-display expressions. Do "info display" to see current list of code numbers. Cancel some expressions to be displayed when program stops. Arguments are the code numbers of the expressions to stop displaying. No argument means cancel all automatic-display expressions. Do "info display" to see current list of code numbers. printf "printf format string", arg1, arg2, arg3, ..., argn This is useful for formatted output in user-defined commands. Like "print" but don't put in value history and don't print newline. This is useful in user-defined commands. Evaluate expression EXP and assign result to variable VAR, using assignment syntax appropriate for the current language (VAR = EXP or VAR := EXP for example). VAR may be a debugger "convenience" variable (names starting with $), a register (a few standard names starting with $), or an actual variable in the program being debugged. EXP is any valid expression. Use "set variable" for variables with names identical to set subcommands. With a subcommand, this command modifies parts of the gdb environment. You can see these environment settings with the "show" command. Call a function in the program. The argument is the function name and arguments, in the notation of the current working language. The result is printed and saved in the value history, if it is not void. Evaluate expression EXP and assign result to variable VAR, using assignment syntax appropriate for the current language (VAR = EXP or VAR := EXP for example). VAR may be a debugger "convenience" variable (names starting with $), a register (a few standard names starting with $), or an actual variable in the program being debugged. EXP is any valid expression. This may usually be abbreviated to simply "set". Print value of expression EXP. Variables accessible are those of the lexical environment of the selected stack frame, plus all those whose scope is global or an entire file. $NUM gets previous value number NUM. $ and $$ are the last two values. $$NUM refers to NUM'th value back from the last one. Names starting with $ refer to registers (with the values they would have if the program were to return to the stack frame now selected, restoring all registers saved by frames farther in) or else to debugger "convenience" variables (any such name not a known register). Use assignment expressions to give values to convenience variables. {TYPE}ADREXP refers to a datum of data type TYPE, located at address ADREXP. @ is a binary operator for treating consecutive data objects anywhere in memory as an array. FOO@NUM gives an array whose first element is FOO, whose second element is stored in the space following where FOO is stored, etc. FOO must be an expression whose value resides in memory. EXP may be preceded with /FMT, where FMT is a format letter but no count or size letter (see "x" command). Same as "print" command, except that if you are running in the epoch environment, the value is printed in its own window. Show the largest offset that will be printed in form. Set the largest offset that will be printed in form. Show printing of source filename and line number with . Set printing of source filename and line number with . Printing of source filename and line number with is %s. The largest offset that will be printed in form is %s. Arguments must be display numbers. Size letters are meaningless in "%s" command. Item count other than 1 is meaningless in "%s" command. Format letter "%c" is meaningless in "%s" command. format-control string and values to print Bad format string, missing '"'. Bad format string, non-terminated '"'. Unrecognized escape character \%c in format string. `*' not supported for precision or width in printf Format specifier `n' not supported in printf Incomplete format specifier at end of format string Unrecognized format specifier '%c' in printf Inappropriate modifiers to format specifier '%c' in printf Wrong number of arguments for specified format-string expected wchar_t argument for %%lc /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/printcmd.c There are no auto-display expressions now. Auto-display expressions now in effect: Num Enb Expression (cannot be evaluated in the current context) osect->objfile && osect->objfile->name %s in load address range of %s overlay section %s of %s %s in load address range of section %s of %s %s in %s overlay section %s of %s %s in load address range of %s overlay section %s %s in load address range of section %s " is a field of the local class variable in a file compiled without debugging No symbol "%s" in current context. address of an argument in register %s a thread-local variable at offset %s in the thread-local storage for `%s' Disabling display %d to avoid infinite recursion. Delete all auto-display expressions? undisplay printf inspect max-symbolic-offset symbol-filename No display number %d. Invalid argument syntax 0-+ # 0123456789 *p == 'p' && *(p + 1) == '\0' (nil) %d: %c /%d%c%c /%c ny unmapped %s + %u %s in %s overlay section %s No symbol matches %s. Argument required. Symbol " `self' `this' " is at , -- loaded at in overlay section %s " is an argument in register %s a variable in register %s an argument at offset %ld a typedef unresolved of unknown (botched) type oplen > 0 %s%s = <* +%u at %s:%d *> Undefined output size "%c". Undefined output format "%c". (gdb-makebuffer "%s" %d '(" ") ) Unable to display "%s": %s x/ starting display address No display number %d. U N N B & U \ X < Q e 0 A ` ` ` ` ` ` ` ` ` ` ` ` ` ` d ` ` ? printf_command sym_info display_uses_solib_p All global and static variable names, or those matching REGEXP. All function names, or those matching REGEXP. All type names, or those matching REGEXP. Set a breakpoint for all functions matching REGEXP. Valid values are "ask", "all", "cancel", and the default is "all". Show how the debugger handles ambiguities in expressions. Set the debugger behavior when more than one symbol are possible matches in an expression. Source files for which symbols have been read in: Source files for which symbols will be read in on demand: mismatched quoting on brackets, try 'operator\[\]' nothing is allowed between '[' and ']' `operator ()' must be specified without whitespace in `()' `operator ?:' must be specified without whitespace in `?:' `operator []' must be specified without whitespace in `[]' /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/symtab.c objfile || SYMBOL_SYMTAB (sym) (Internal error: pc %s in read in psymtab, but not in symtab.) Internal: global symbol `%s' found in %s psymtab but not in symtab. %s may be an inlined function, or may be a template function (if a template, try specifying an instantiation: %s). Internal: static symbol `%s' found in %s psymtab but not in symtab. %s may be an inlined function, or may be a template function (if a template, try specifying an instantiation: %s). Internal: %s symbol `%s' found in %s psymtab but not in symtab. %s may be an inlined function, or may be a template function (if a template, try specifying an instantiation: %s). Internal error: `%s' is not an aggregate must search on specific domain %s; All %ss matching regular expression "%s": Internal: readin %s pst for `%s' found when no symtab found. whereis Source files in the program. sources rbreak Source files in the program lg multiple-symbols _globals_ `operator %s' not supported obj != NULL objfile File static global operator%.*s%s Invalid regexp (%s): %s All defined %ss: Non-debugging symbols: __dt __%s%s __%s%s%d ask all cancel v * - ( ( $& q ( fixup_psymbol_section fixup_symbol_section matching_obj_sections Load symbol table from executable file FILE. The `file' command can also load symbol tables, as well as setting the file to execute. Load symbols from FILE, assuming FILE has been dynamically loaded. Usage: add-symbol-file FILE ADDR [-s -s ...] ADDR is the starting address of the file's text. The optional arguments are section-name section-address pairs and should be specified if the data and bss segments are not contiguous with the text. SECT is a section name to be loaded at SECT_ADDR. Dynamically load FILE into the running program, and record its symbols for access from GDB. A load OFFSET may also be given. Show dynamic symbol table reloading multiple times in one run. Set dynamic symbol table reloading multiple times in one run. Commands for debugging overlays. Assert that an overlay section is mapped. Assert that an overlay section is unmapped. List mappings of overlay sections. Enable automatic overlay debugging. Read the overlay mapping state from the target. Usage: set extension-language .foo bar Show mapping between filename extension and source language. Set mapping between filename extension and source language. All filename extensions associated with a source language. Separate debug symbols are first searched for in the same directory as the binary, then in the `.debug' subdirectory, and lastly at the path of the directory of the binary with each global debug-file-directory component prepended. Show the directories where separate debug symbols are searched for. Set the directories where separate debug symbols are searched for. Mapping between filename extension and source language is "%s". The directory where separate debug symbols are searched for is "%s". Dynamic symbol table reloading multiple times in one run is %s. Filename extensions and the languages they represent: I'm sorry, Dave, I can't do that. Symbol format `%s' unknown. Overlay debugging not enabled. Use either the 'overlay auto' or the 'overlay manual' command. Argument required: name of an overlay section '%s': Filename extension must begin with '.' '%s': two arguments required -- filename extension and language This target does not know how to read its overlay state. Automatic overlay debugging enabled. Note: section %s unmapped by overlap "overlay" must be followed by the name of an overlay command. /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/symfile.c 0 <= which && which <= data->num_segments Error reading inferior's overlay table: couldn't find `_novlys' variable in inferior. Use `overlay manual' mode. Error reading inferior's overlay table: couldn't find `_ovly_table' array in inferior. Use `overlay manual' mode. "%s" is not an object file: %s Loading section %s, size %s lma %s `%s' has disappeared; keeping its symbols. `%s' has changed; re-reading symbols. Can't open %s to read symbols. Can't read symbols from %s: %s. `%s': can't open to read symbols: %s. the debug information found in "%s" does not match "%s" (CRC mismatch). i >= 0 && IS_DIR_SEPARATOR (dir[i]) no loadable sections found in added symbol-file %s Discard symbol table from `%s'? Load new symbol table from "%s"? (no debugging symbols found)... add-symbol-file takes a file name and an address USAGE: add-symbol-file [-mapped] [-readnow] [-s ]* The address where %s has been loaded is missing add symbol table from file "%s" at no symbol file name was specified add-symbol-file symbol-reloading overlay ovly ov unmap-overlay list-overlays Enable overlay debugging. manual Disable overlay debugging. load-target .C .cc .cp .cpp .cxx .c++ .java .class .m .f .F .s .sx .S .pas .pp .adb .ads .a .ada extension-language extensions debug-file-directory %s - %s Section %s is not mapped No overlay section called %s Overlay debugging disabled. Overlay debugging enabled. num_segment_bases > 0 data->num_segments > 0 objfile->sf->sym_relocate _ovly_table _novlys Section %s, loaded at - , mapped at No sections are mapped. Transfer rate: transfer-rate bits/sec bytes/sec KB/sec transferred-bits bits in <1 sec write-rate bytes/write file to load Invalid download offset:%s. Too many parameters. Load failed Start address , load size load-size Canceled the download Can't close BFD for %s: %s (no debugging symbols found) `%s': can't read symbols: %s. bfd_usrdata (sym_bfd) == NULL .gnu_debuglink section %s not found in %s Discard symbol table? symfile_objfile == NULL No symbol file now. ! (addrs && offsets) Reading symbols from %s... expanding to full symbols... done. -readnow -s %s_addr = %s \"' symfile_map_offsets_to_segments symfile_relocate_debug_section VEC_memory_write_request_s_quick_push symfile_bfd_open find_separate_debug_file_by_debuglink symbol_file_clear syms_from_objfile Static symbol ` ' only found in psymtab Global symbol ` Psymtab covers bad range covers but symtab covers only { objfile %s ((struct objfile *) %s) { psymtab %s readin %s (null) fullname %s text addresses globals (none) statics dependencies { } { symtab %s ((struct symtab *) %s) dirname %s fullname %s (primary) debugformat %s } Object file %s: Objfile at , bfd at , %d minsyms Psymtabs: NOT ON CHAIN! Symtabs: %s partial symbols: `%s' undefined domain, struct domain, label domain, , constant int pass by value pass by reference register address parameter stack parameter constant bytes computed at runtime (object ) Read from object file %s ( Full symtab was read (at by function at Relocate symbols by %d Global Symtab for file %s Language: %s Line table: line %d at Blockvector: block #%03d, object at under , %d syms/buckets in , function %s Error printing symbol: label %s at %s %s = typedef const %ld (0x%lx) const %u hex bytes: static at parameter register %ld arg at offset 0x%lx reference arg at 0x%lx local at offset 0x%lx label at block object botched symbol class %x Statistics for '%s': partial symbol cache preprocessor macro cache file name cache Object file %s: No minimal symbols found. [%2d] %c ((struct partial_symtab *) %s) (* (struct partial_symbol **) %s @ %d) psymtab %s ((struct partial_symtab *) %s) blockvector ((struct blockvector *) %s)%s linetable ((struct linetable *) %s) print-psymbols takes an output file name and optional symbol file name Partial symtab for source file %s Symbols cover text addresses Depends on %d other partial symtabs. Blockvector same as previous symtab Arguments missing: an output file name and an optional symbol file name address parameter register %ld Number of "stab" symbols read: %d Number of "minimal" symbols read: %d Number of "partial" symbols read: %d Number of "full" symbols read: %d Number of "types" defined: %d Number of psym tables (not yet expanded): %d Number of symbol tables: %d Number of symbol tables with line tables: %d Number of symbol tables with blockvectors: %d Space used by a.out string tables: %d Total memory used for objfile obstack: %d Total memory used for psymbol cache: %d Total memory used for macro cache: %d Total memory used for file name cache: %d Byte cache statistics for '%s': print-msymbols takes an output file name and optional symbol file name internal error: minimal symbol count %d != %d ! y d O : % P p } e ; W [0] cancel [1] all [%d] %s at %s:%d ?HERE PS2 overload-choice one or more choice numbers canceled No choice number %d. "%s" is not a function No source file named %s. if if if if( if( Unmatched single quote. Function "%s" not defined. canceled because the command is ambiguous See set/show multiple-symbol. [%d] %s at ?FILE:%d [No symtab? Probably broken debug info...] Arguments must be choice numbers. duplicate request for %d ignored. debugging symbol "%s" does not match selector; ignoring Line number not known for symbol "%s" Hint: try '%s or '%s (Note leading single quote.) the class `%s' does not have destructor defined the class %s does not have any method named %s malformed template specification in command Can't find member of namespace, class, struct, or union named "%s" History values used in line specs must have integer values. Convenience variables used in line specs must have integer values. dict_add_symbol: non-expandable dictionary /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/dictionary.c 0 0 ` 0 ` 0 Variables of type float should generally be converted to doubles before calling an unprototyped function, and left alone when calling a prototyped function. However, some older debug info formats do not provide enough information to determine that a function is prototyped. If this flag is set, GDB will perform the conversion for a function it considers unprototyped. The default is to perform the conversion. Show coercion of floats to doubles when calling functions Set coercion of floats to doubles when calling functions. The unwindonsignal lets the user determine what gdb should do if a signal is received while in a function called from gdb (call dummy). If set, gdb unwinds the stack and restore the context to what as it was before the call. The default is to stop in the frame where the signal was received. Show unwinding of stack if a signal is received while in a call dummy. Set unwinding of stack if a signal is received while in a call dummy. The unwind on terminating exception flag lets the user determine what gdb should do if a std::terminate() call is made from the default exception handler. If set, gdb unwinds the stack and restores the context to what it was before the call. If unset, gdb allows the std::terminate call to proceed. The default is to unwind the frame. Show unwinding of stack if std::terminate() is called while in a call dummy. Set unwinding of stack if std::terminate is called while in call dummy. unwind-on-terminating-exception Unwind stack if a C++ exception is unhandled while in a call dummy is %s. Unwinding of stack if a signal is received while in a call dummy is %s. Coercion of floats to doubles when calling functions is %s. /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/infcall.c Invalid data type for function to be called. This target does not support function calls. sp == gdbarch_frame_align (gdbarch, sp) (gdbarch_inner_than (gdbarch, 1, 2) && sp <= old_sp) || (gdbarch_inner_than (gdbarch, 2, 1) && sp >= old_sp) gdbarch_push_dummy_code_p (gdbarch) Too few arguments in function call. %s An error occurred while in a function called from GDB. Evaluation of the expression containing the function (%s) will be abandoned. When the function is done executing, GDB will silently stop. The program being debugged exited while in a function called from GDB. Evaluation of the expression containing the function (%s) will be abandoned. The program received a signal in another thread while making a function call from GDB. Evaluation of the expression containing the function (%s) will be abandoned. When the function is done executing, GDB will silently stop. The program stopped in another thread while making a function call from GDB. Evaluation of the expression containing the function (%s) will be abandoned. When the function is done executing, GDB will silently stop. The program being debugged was signaled while in a function called from GDB. GDB has restored the context to what it was before the call. To change this behavior use "set unwindonsignal off". Evaluation of the expression containing the function (%s) will be abandoned. The program being debugged was signaled while in a function called from GDB. GDB remains in the frame where the signal was received. To change this behavior use "set unwindonsignal on". Evaluation of the expression containing the function (%s) will be abandoned. When the function is done executing, GDB will silently stop. The program being debugged entered a std::terminate call, most likely caused by an unhandled C++ exception. GDB blocked this call in order to prevent the program from being terminated, and has restored the context to its original state before the call. To change this behaviour use "set unwind-on-terminating-exception off". Evaluation of the expression containing the function (%s) will be abandoned. The program being debugged stopped while in a function called from GDB. Evaluation of the expression containing the function (%s) will be abandoned. When the function is done executing, GDB will silently stop. coerce-float-to-double unwindonsignal at 0x%s strlen (tmp) + 1 <= buf_size __CALL_DUMMY_ADDRESS std::terminate() ... should not be here retval y O C O O O call_function_by_hand push_dummy_code get_function_name Usage: set inferior-tty /dev/pts/1 Show terminal for future runs of program being debugged. Set terminal for future runs of program being debugged. Follow this command with any number of args, to be passed to the program. Show argument list to give program being debugged when it is started. Set argument list to give program being debugged when it is started. The environment to give the program, or one variable's value. With an argument VAR, prints the value of environment variable VAR to give the program being debugged. With no arguments, prints the entire environment to be given to the program. Complement to certain "set" commands. Cancel environment variable VAR for the program. This does not affect the program until the next "run" command. Set environment variable value to give the program. Arguments are VAR VALUE where VAR is variable name and VALUE is value. VALUES of environment variables are uninterpreted strings. This does not affect the program until the next "run" command. Add directory DIR(s) to beginning of search path for object files. $cwd in the path means the current working directory. This path is equivalent to the $PATH shell variable. It is a list of directories, separated by colons. These directories are searched to find fully linked executable files and separately compiled object files as needed. Current search path for finding object files. $cwd in the path means the current working directory. This path is equivalent to the $PATH shell variable. It is a list of directories, separated by colons. These directories are searched to find fully linked executable files and separately compiled object files as needed. Kill execution of program being debugged. Attach to a process or file outside of GDB. This command attaches to another target, of the same type as your last "target" command ("info files" will show your target stack). The command may take as argument a process id or a device file. For a process id, you must have permission to send the process a signal, and it must have the same effective uid as the debugger. When using "attach" with a process id, the debugger finds the program running in the process, looking first in the current working directory, or (if not found there) using the source file search path (see the "directory" command). You can also use the "file" command to specify the program, and to load its symbol table. Detach a process or file previously attached. If a process, it is no longer traced, and it continues its execution. If you were debugging a file, the file is closed and gdb no longer accesses it. Disconnect from a target. The target will wait for another debugger to connect. Not available for all targets. Continue program giving it signal specified by the argument. An argument of "0" means continue program without giving it a signal. Step one instruction exactly. Argument N means do this N times (or till program stops for another reason). Step one instruction, but proceed through subroutine calls. Argument N means do this N times (or till program stops for another reason). Execute until selected stack frame returns. Upon return, the value returned is printed and put in the value history. Step program, proceeding through subroutine calls. Like the "step" command as long as subroutine calls do not happen; when they do, the call is treated as one instruction. Argument N means do this N times (or till program stops for another reason). Step program until it reaches a different source line. Argument N means do this N times (or till program stops for another reason). Execute until the program reaches a source line greater than the current or a specified location (same args as break command) within the current frame. Continue the program up to the given location (same form as args for break command). Execution will also stop upon exit from the current stack frame. Continue program being debugged at specified line or address. Give as argument either LINENUM or *ADDR, where ADDR is an expression for an address to start at. Usage: go Continue program being debugged, stopping at specified line or address. Give as argument either LINENUM or *ADDR, where ADDR is an expression for an address to start at. This command is a combination of tbreak and jump. Continue program being debugged, after signal or breakpoint. If proceeding from breakpoint, a number N may be used as an argument, which means to set the ignore count of that breakpoint to N - 1 (so that the breakpoint won't break until the Nth time it is reached). If non-stop mode is enabled, continue only the current thread, otherwise all the threads in the program are continued. To continue all stopped threads in non-stop mode, use the -a option. Specifying -a and an ignore count simultaneously is an error. Start debugged program. You may specify arguments to give it. Args may include "*", or "[...]"; they are expanded using "sh". Input and output redirection with ">", "<", or ">>" are also allowed. With no arguments, uses arguments last specified (with "run" or "set args"). To cancel previous arguments and run with no arguments, use "set args" without arguments. Start debugged program with no arguments. Run the debugged program until the beginning of the main procedure. You may specify arguments to give to your program, just as with the "run" command. Interrupt the execution of the debugged program. If non-stop mode is enabled, interrupt only the current thread, otherwise all the threads in the program are stopped. To interrupt all running threads in non-stop mode, use the -a option. List of integer registers and their contents, for selected stack frame. Register name as argument means describe only that register. List of all registers and their contents, for selected stack frame. Register name as argument means describe only that register. Execution status of the program. Print the status of the floating point unit Print the status of the vector unit The program has no registers now. No floating-point info available for this processor. Cannot execute this command without a live selected thread. The program being debugged is not being run. It stopped after being stepped. It stopped at a breakpoint that has since been deleted. It stopped with signal %s, %s. Type "info stack" or "info registers" for more information. Terminal for future runs of program being debugged is "%s". Asynchronous execution not supported on this target. No source file has been specified. Line %d is not in `%s'. Jump anyway? WARNING!!! Destination is in unmapped overlay! Jump anyway? Execution is not within a known function. Cannot find bounds of current function Single stepping until exit from function %s, which has no line number information. Asynchronous 'finish' not supported in reverse. The "finish" command does not take any arguments. "finish" not meaningful in the outermost frame. Finish: couldn't find function. /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/infcmd.c finish_command: function has no target type TYPE_CODE (value_type) != TYPE_CODE_VOID Kill the program being debugged? Executable and object file path: environment variable and value Setting environment variable "%s" to null value. Delete all environment variables? "unset" must be followed by the name of an unset subcommand. -a is meaningless in all-stop mode. `-a' is meaningless in all-stop mode. Can't resume all threads and specify proceed count simultaneously. Not stopped at any breakpoint; argument ignored. A program is being debugged already. Kill it? Cannot attach to this target in non-stop mode The program being debugged has been started already. Start it from the beginning? The target does not support running in non-stop mode. No symbol table loaded. Use the "file" command. set inferior-tty environment unset unset paths kill detach fin advance go cont fg all-registers No vector information Selected thread is running. Program stopped at %s. It stopped at breakpoint %d. The program is not being run. starting address Unreasonable jump request Continuing at Usage: go The program is not running. a location No selected frame. Run till exit from Run back to call of Value returned is $%d gdb-result-var return-value Value returned has type: return-type Cannot determine contents signal number Continuing with no signal. Continuing with signal %s. In %s, Environment variable " " not defined. environment variable to set -a Missing register name Invalid register `%.*s' *value not available* (raw 0x Continuing. Not killed. "!#$&*()\|[]{}<>?'"`~^; Program not restarted. Starting program execfile infargs print_return_value PATH What debugger does when program gets various signals. Specify a signal as argument to print info on that signal only. Specify how to handle a signal. Args are signals and actions to apply to those signals. Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals from 1-15 are allowed for compatibility with old versions of GDB. Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5). The special arg "all" is recognized to mean all signals except those used by the debugger, typically SIGTRAP and SIGINT. Recognized actions include "stop", "nostop", "print", "noprint", "pass", "nopass", "ignore", or "noignore". Stop means reenter debugger if this signal happens (implies print). Print means print a message if this signal happens. Pass means let program see this signal; otherwise program doesn't know. Ignore is a synonym for nopass and noignore is a synonym for pass. Pass and Stop may be combined. Specify how to handle a signal. Args are signals and actions to apply to those signals. Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals from 1-15 are allowed for compatibility with old versions of GDB. Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5). The special arg "all" is recognized to mean all signals except those used by the debugger, typically SIGTRAP and SIGINT. Recognized actions include "s" (toggles between stop and nostop), "r" (toggles between print and noprint), "i" (toggles between pass and nopass), "Q" (noprint) Stop means reenter debugger if this signal happens (implies print). Print means print a message if this signal happens. Pass means let program see this signal; otherwise program doesn't know. Ignore is a synonym for nopass and noignore is a synonym for pass. Pass and Stop may be combined. There is no `stop' command, but you can set a hook on `stop'. This allows you to set a list of commands to be run each time execution of the program stops. When non-zero, inferior specific debugging is enabled. When non-zero, displaced stepping specific debugging is enabled. Show displaced stepping debugging. Set displaced stepping debugging. When debugging a multi-threaded program and this setting is off (the default, also called all-stop mode), when one thread stops (for a breakpoint, watchpoint, exception, or similar events), GDB stops all other threads in the program while you interact with the thread of interest. When you continue or step a thread, you can allow the other threads to run, or have them remain stopped, but while you inspect any thread's state, all threads stop. In non-stop mode, when one thread stops, other threads can continue to run freely. You'll be able to step each thread independently, leave it stopped or free to run as needed. Show whether gdb controls the inferior in non-stop mode. Set whether gdb controls the inferior in non-stop mode. If nonzero, gdb will give control to the user when the dynamic linker notifies gdb of shared library events. The most common event of interest to the user would be loading/unloading of a new library. Show stopping for shared library events. Set stopping for shared library events. A fork or vfork creates a new process. follow-fork-mode can be: parent - the original process is debugged after a fork child - the new process is debugged after a fork The unfollowed process will continue to run. By default, the debugger will follow the parent process. Show debugger response to a program call of fork or vfork. Set debugger response to a program call of fork or vfork. An exec call replaces the program image of a process. follow-exec-mode can be: new - the debugger creates a new inferior and rebinds the process to this new inferior. The program the process was running before the exec call can be restarted afterwards by restarting the original inferior. same - the debugger keeps the process bound to the same inferior. The new executable image replaces the previous executable loaded in the inferior. Restarting the inferior after the exec call restarts the executable the process was running after the exec call. By default, the debugger will use the same inferior. Show debugger response to a program call of exec. Set debugger response to a program call of exec. off == no locking (threads may preempt at any time) on == full locking (no thread except the current thread may run) step == scheduler locked during every single-step operation. In this mode, no other thread may run during a step command. Other threads may run while stepping over a function call ('next'). Show mode for locking scheduler during execution. Set mode for locking scheduler during execution. When on, execution commands (such as 'continue' or 'next') resume all threads of all processes. When off (which is the default), execution commands only resume the threads of the current process. The set of threads that are resumed is further refined by the scheduler-locking mode (see help set scheduler-locking). Show mode for resuming threads of all processes. Set mode for resuming threads of all processes. When set, doing a step over a function without debug line information will stop at the first instruction of that function. Otherwise, the function is skipped and the step command stops at a different source line. Show mode of the step operation. Set mode of the step operation. If on, gdb will use displaced stepping to step over breakpoints if it is supported by the target architecture. If off, gdb will not use displaced stepping to step over breakpoints, even if such is supported by the target architecture. If auto (which is the default), gdb will use displaced stepping if the target architecture supports it and non-stop mode is active, but will not use it in all-stop mode (see help set non-stop). Show debugger's willingness to use displaced stepping. Set debugger's willingness to use displaced stepping. Tells gdb whether to execute forward or backward. Show direction of execution (forward/reverse). Set direction of execution. Options are 'forward' or 'reverse'. Tells gdb whether to detach the child of a fork. Show whether gdb will detach the child of a fork. Set whether gdb will detach the child of a fork. Cannot execute this command while the selected thread is running. Target '%s' cannot support this command. infrun: Switching context from %s infrun: clear_proceed_status_thread (%s) Resuming the execution of threads of all processes is %s. Controlling the inferior in non-stop mode is %s. Forward (target `%s' does not support exec-direction). Mode for locking scheduler during execution is "%s". Debugger's willingness to use displaced stepping to step over breakpoints is %s (currently %s). Debugger's willingness to use displaced stepping to step over breakpoints is %s. Debugger response to a program call of fork or vfork is "%s". Stopping for shared library events is %s. Displace stepping debugging is %s. Mode of the step operation is %s. %s is executing new program: %s current_program_space == inf->pspace /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/infrun.c Detaching vfork parent process %d after child exec. Detaching vfork parent process %d after child exit. infrun: resuming vfork parent process %d infrun: inserting step-resume breakpoint at %s frame_id_p (frame_unwind_caller_id (next_frame)) Program terminated with signal The program no longer exists. No more reverse-execution history. print_stop_reason: unrecognized enum value Cannot change this setting while the inferior is running. Signal Stop Print Pass to program Description Use the "handle" command to change these tables. Unable to restore previously selected frame: Unable to restore previously selected frame. Cannot remove breakpoints because program is no longer writable. Further execution is probably impossible. Error while running hook_stop: get_frame_type (frame) == DUMMY_FRAME gdbarch_displaced_step_copy_insn_p (gdbarch) displaced: defering step of %s displaced: displaced pc to %s infrun: resume (step=%d, signal=%d), trap_expected=%d The program is stopped at a permanent breakpoint, but GDB does not know how to step past a permanent breakpoint on this architecture. Try using a command like `return' or `jump' to continue execution. !(singlestep_breakpoints_inserted_p && step) infrun: syscall number = '%d' Not resuming: switched threads before following fork child. Unexpected pending_follow.kind %d infrun: TARGET_WAITKIND_IGNORE infrun: Treating signal as SIGTRAP infrun: infwait_thread_hop_state infrun: infwait_step_watch_state infrun: infwait_nonstep_watch_state infrun: TARGET_WAITKIND_LOADED infrun: TARGET_WAITKIND_SPURIOUS infrun: TARGET_WAITKIND_EXITED infrun: TARGET_WAITKIND_SIGNALLED infrun: TARGET_WAITKIND_FORKED infrun: TARGET_WAITKIND_VFORK_DONE infrun: TARGET_WAITKIND_EXECD infrun: TARGET_WAITKIND_SYSCALL_ENTRY infrun: TARGET_WAITKIND_SYSCALL_RETURN infrun: TARGET_WAITKIND_STOPPED targets should add new threads to the thread list themselves in non-stop mode. displaced: stepping queued %s now breakpoint is gone %s: step(%d) infrun: stopped by watchpoint infrun: stopped data address = %s infrun: (no data address available) singlestep_breakpoints_inserted_p ptid_equal (singlestep_ptid, ecs->ptid) !ptid_equal (singlestep_ptid, saved_singlestep_ptid) infrun: stepping_past_singlestep_breakpoint infrun: handling deferred step ptid_equal (inferior_ptid, singlestep_ptid) infrun: software single step trap for %s infrun: unexpected thread, but expected thread advanced also Cannot step over breakpoint hit in wrong thread infrun: no user watchpoint explains watchpoint SIGTRAP, ignoring infrun: signal arrived while stepping over breakpoint infrun: signal may take us out of single-step range infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME (!gdbarch_get_longjmp_target) infrun: inserting longjmp-resume breakpoint at %s infrun: BPSTAT_WHAT_CLEAR_LONGJMP_RESUME ecs->event_thread->step_resume_breakpoint != NULL infrun: BPSTAT_WHAT_STOP_NOISY infrun: BPSTAT_WHAT_STOP_SILENT infrun: BPSTAT_WHAT_STEP_RESUME infrun: BPSTAT_WHAT_CHECK_SHLIBS infrun: BPSTAT_WHAT_CHECK_JIT infrun: not switching back to stepped thread, it has vanished infrun: switching back to stepped thread infrun: step past dynamic linker infrun: step-resume breakpoint is inserted infrun: no stepping, continue infrun: stepping inside range [%s-%s] infrun: stepped into dynsym resolve code infrun: stepped into signal trampoline infrun: stepped into subroutine infrun: stepped into solib return tramp infrun: stepped into undebuggable function infrun: stepped into inlined function infrun: stepping through inlined function infrun: stepped to a different line infrun: wait_for_inferior (treat_exec_as_sigtrap=%d) infrun: proceed (addr=%s, signal=%d, step=%d) infrun: resuming vfork parent thread %s Unrecognized or ambiguous flag word: "%s". %s is used by the debugger. Are you sure you want to change it? Invalid signal handling flag. Show inferior debugging. Set inferior debugging. infrun displaced non-stop stop-on-solib-events follow-fork-mode follow-exec-mode scheduler-locking schedule-multiple step-mode displaced-stepping exec-direction detach-on-fork _siginfo Unable to write siginfo Unable to read siginfo infrun: prepare_to_wait infrun: stop_stepping Forward. Reverse. Follow exec mode is "%s". Inferior debugging is %s. return_frame != NULL signal-name signal-meaning Program exited with code 0%o exit-code Program exited normally. [ thread-name ] #%d stopped Program received signal %s [Switching to %s] Unknown value. infrun: target_wait (%d [%s] , status) = infrun: %d [%s], infrun: %s displaced: stepping %s now displaced: saved %s: displaced: run %s: infrun: infwait_normal_state _exitcode displaced: restored %s infrun: stop_pc = %s !non_stop infrun: unexpected thread infrun: thread_hop_needed infrun: context switch infrun: step through delay infrun: stopped infrun: quietly stopped infrun: random signal %d infrun: BPSTAT_WHAT_SINGLE infrun: stepi/nexti infrun: no line number info infrun: keep going signal to handle nostop noignore noprint nopass Not confirmed, unchanged. xdb command } ~ ~ ^ } _ \ x R q 6 y _ child new off on step auto on forward reverse handle_inferior_event handle_vfork_child_exec_or_exit follow_exec displaced_step_prepare insert_step_resume_breakpoint_at_frame insert_longjmp_resume_breakpoint insert_step_resume_breakpoint_at_sal insert_step_resume_breakpoint_at_caller normal_stop resume parent same off Make selected stack frame return to its caller. Control remains in the debugger, but when you continue execution will resume in the frame above the one now selected. If an argument is given, it is an expression for the value to return. Select and print stack frame that called this one. An argument says how many frames up to go. Same as the `up' command, but does not print anything. This is useful in command scripts. Select and print stack frame called by this one. An argument says how many frames down to go. Same as the `down' command, but does not print anything. This is useful in command scripts. Select and print a stack frame. With no argument, print the selected stack frame. (See also "info frame"). An argument specifies the frame to select. It can be a stack frame number or the address of the frame. With argument, nothing is printed if input is coming from a command file or a user-defined command. Print the current stack frame. Select a stack frame without printing anything. An argument specifies the frame to select. It can be a stack frame number or the address of the frame. Print backtrace of all stack frames, or innermost COUNT frames. With a negative argument, print outermost -COUNT frames. Use of the 'full' qualifier also prints the values of the local variables. Print backtrace of all stack frames, or innermost COUNT frames and the values of the local variables. With a negative argument, print outermost -COUNT frames. Usage: T Backtrace of the stack, or innermost COUNT frames. All about selected stack frame, or frame at ADDR. Local variables of current stack frame. Argument variables of current stack frame. Argument and local variables of current stack frame. Select the stack frame that contains . Usage: func Exceptions that can be caught in the current stack frame. Show printing of non-scalar frame arguments Set printing of non-scalar frame arguments If ON, GDB will display disassembly of the next source line, in addition to displaying the source line itself. If the next source line cannot be displayed (e.g., source is unavailable or there's no line info), GDB will display disassembly of next instruction instead of showing the source line. If AUTO, display disassembly of next instruction only if the source line cannot be displayed. If OFF (which is the default), never display the disassembly of the next source line. Show whether to disassemble next source line or insn when execution stops. Set whether to disassemble next source line or insn when execution stops. Debugger's willingness to use disassemble-next-line is %s. print_frame_label_vars disabled. Too many args in frame specification /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/stack.c Bottom (innermost) frame selected; you cannot go down. Initial frame selected; you cannot go up. No symbol table info available. Can not force return from an inlined function. Return value type not available for selected stack frame. Please use an explicit cast of the value to return. The location at which to store the function's return value is unknown. If you continue, the return value that you specified will be ignored. %sMake selected stack frame return now? gdbarch_return_value (gdbarch, func_type, return_type, NULL, NULL, NULL) == RETURN_VALUE_REGISTER_CONVENTION '%s' not within current stack frame. inline_skipped_frames (inferior_ptid) > 0 get_frame_type (get_next_frame (frame)) == INLINE_FRAME (More stack frames follow...) up-silently dow down-silently bt frame-arguments disassemble-next-line scalars nsym != NULL Stack level %d, frame at Stack frame at (%s:%d) saved %s Outermost frame: %s inlined into frame %d called by frame at caller of frame at source language %s. Arglist at unknown address. Arglist at numargs >= 0 no args. 1 arg: %d args: Locals at unknown address, Locals at Previous frame's sp is Previous frame's sp at Previous frame's sp in %s Saved registers: No arguments. No locals. %sMake %s return now? Not confirmed Backtrace stopped: %s frame_info print_frame_args return_command print_args_stub frame_show_address IDs of currently known threads. Use this command to switch between threads. The new thread ID must be currently known. Apply a command to a list of threads. Apply a command to all threads. Show printing of thread events (such as thread start and exit). Set printing of thread events (such as thread start and exit). Printing of thread events is %s. /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/thread.c [Current thread is %d (%s) (exited)] Please specify a thread ID list Please specify a command following the thread ID list Couldn't restore frame #%d in current thread, at reparsed frame #0 Requested thread not found in requested process current_thread != -1 || !thread_list || ptid_equal (inferior_ptid, null_ptid) The current thread has terminated. See `help thread'. No selected thread. See `help thread'. thread apply apply thread-events No thread selected [Current thread is %d (%s)] Error parsing %s Thread %d has terminated. Thread %d (%s): frame_level >= 0 tp->state_ != THREAD_EXITED details current-thread-id thread-ids number-of-threads Thread ID %d not known. Thread ID %d has terminated. [Switching to thread new-thread-id )] [New %s] restore_selected_frame switch_to_thread print_thread_info finish_thread_state_cleanup finish_thread_state set_stop_requested set_executing is_executing is_thread_state set_running inferior_thread Bad switch. bad state val >= 0 exception.reason <= 0 /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/exceptions.c catch_exceptions_with_msg Execute a command in an interpreter. It takes two arguments: The first argument is the name of the interpreter to use. The second argument is the command to execute. /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/interps.c interp_lookup (interp->name) == NULL !top_level || !current_interpreter !top_level || !top_level_interpreter_ptr Could not suspend interpreter "%s". and could not restore old interp! Failed to initialize new interp "%s" %s Switching to interpreter "%.24s". usage: interpreter-exec [ ... ] Could not find interpreter "%s". Could not switch to interpreter "%s". top_level_interpreter_ptr interpreter-exec command error in command: "%s". top_level_interpreter_data interp_set interp_add ! t->obstack file1 && file2 ! included1 || ! included2 ! t->main_source /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/macrotab.c macro '%s' is #undefined twice, at %s:%d and %s:%d macro `%s' redefined at %s:%d; original definition at %s:%d both `%s' and `%s' allegedly #included at %s:%d compare_locations macro_allow_redefinitions macro_main macro_set_main macro expand-once exp1 undef macro define %s included at %s:%d usage: macro undef NAME Invalid macro name. Macro is missing an argument. Defined at #define %s -D%s expands to: Prefix for commands dealing with C preprocessor macros. Fully expand any C/C++ preprocessor macro invocations in EXPRESSION. Show the expanded expression. Expand C/C++ preprocessor macro invocations appearing directly in EXPRESSION. Show the expanded expression. This command differs from `macro expand' in that it only expands macro invocations that appear directly in EXPRESSION; if expanding a macro introduces further macro invocations, those are left unexpanded. `macro expand-once' helps you see how a particular macro expands, whereas `macro expand' shows you how all the macros involved in an expression work together to yield a pre-processed expression. Show the definition of MACRO, and its source location. Define a new C/C++ preprocessor macro. The GDB command `macro define DEFINITION' is equivalent to placing a preprocessor directive of the form `#define DEFINITION' such that the definition is visible in all the inferior's source files. For example: (gdb) macro define PI (3.1415926) (gdb) macro define MIN(x,y) ((x) < (y) ? (x) : (y)) Remove the definition of the C/C++ preprocessor macro with the given name. List all the macros defined using the `macro define' command. usage: macro define NAME[(ARGUMENT-LIST)] [REPLACEMENT-LIST] Two macro arguments with identical names. ',' or ')' expected at end of macro arguments. You must follow the `info macro' command with the name of the macro whose definition you want to see. GDB has no preprocessor macro information for that code. The symbol `%s' has no definition as a C/C++ preprocessor macro at You must follow the `macro expand-once' command with the expression you want to expand. GDB has no preprocessor macro information for that code. You must follow the `macro expand' command with the expression you want to expand. "macro" must be followed by the name of a macro command. Expand-once not implemented yet. /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/macroexp.c Unterminated comment in macro expansion. A character constant must contain at least one character. Unterminated string in expression. Newline characters may not appear in string constants. unable to avoid splicing tokens during macro expansion Malformed argument list for macro `%s'. Wrong number of arguments to macro `%s' (expected %d, got %d). Stringification operator requires an argument. Argument to stringification operator must name a macro parameter. Splicing operator at end of macro src->shared eEpP ! b->shared src->last_token != -1 dest->last_token != -1 src_first->shared src_rest->shared ! dest->shared __VA_ARGS__ dest->len == 0 Stray splicing operator %> %:%: ## :> <: <% get_token get_character_constant get_string_literal :) Qs' <5& + - ( + q/ & &j) B- + e ( C$& a6- 5& & r + 5& s + 5& G+ 6& e- 6& 6& 6& 6& Y6- Uf) Xf) Zf) 6& C- %6& YA- ]f) ( `f) ,. "6& 6& >+- 6& 6& 6& cf) ff) + 6& 9 % 6& Vf) 6& _A- maybe_expand substitute_args resize_buffer append_tokens_without_splicing scan free_buffer symtab found for `%s', but that file is not covered in the compilation unit's macro information Hangup detected on fd %d Error detected on fd %d Invalid or non-`poll'able fd %d Exception condition detected on fd %d error detected on stdin Space used: %ld (%c%ld for this command) Erroneous arithmetic operation. Could not kill the program being debugged Command has same effect as set annotate error detected from target. completed. Event type not recognized. U c 7 list == NULL *|"';:?>< *|"';:?><, /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/completer.c !@#$%^&*()+=|~`}{[]"';:?/>.<, : / gdb_completion_word_break_characters j) j) Show architecture debugging. Set architecture debugging. data->init_p data->pre_init == NULL new_gdbarch != NULL new_gdbarch->initialized_p gdbarch_qsupported called gdbarch->max_insn_length != 0 gdbarch_vbit_in_delta called gdbarch->print_insn != NULL gdbarch_print_insn called gdbarch->frame_align != NULL gdbarch_frame_align called gdbarch->unwind_sp != NULL gdbarch_unwind_sp called gdbarch->unwind_pc != NULL gdbarch_unwind_pc called gdbarch->inner_than != NULL gdbarch_inner_than called gdbarch_skip_prologue called gdbarch->return_value != NULL gdbarch_return_value called gdbarch->dummy_id != NULL gdbarch_dummy_id called gdbarch_register_type called gdbarch_register_name called gdbarch_fp0_regnum called gdbarch_ps_regnum called gdbarch_pc_regnum called gdbarch_sp_regnum called gdbarch->num_regs != -1 gdbarch_num_regs called gdbarch->write_pc != NULL gdbarch_write_pc called gdbarch->read_pc != NULL gdbarch_read_pc called gdbarch->char_signed != -1 gdbarch_char_signed called gdbarch->addr_bit != 0 gdbarch_addr_bit called gdbarch_ptr_bit called gdbarch_double_format called gdbarch_double_bit called gdbarch_float_format called gdbarch_float_bit called gdbarch_long_long_bit called gdbarch_long_bit called gdbarch_int_bit called gdbarch_short_bit called gdbarch_target_desc called gdbarch_osabi called gdbarch_byte_order called gdbarch_bfd_arch_info called gdbarch_tdep called gdbarch_dump: addr_bit = %s gdbarch_dump: float_bit = %s gdbarch_dump: int_bit = %s gdbarch_dump: long_bit = %s gdbarch_dump: num_regs = %s gdbarch_dump: osabi = %s gdbarch_dump: pc_regnum = %s gdbarch_dump: ps_regnum = %s gdbarch_dump: ptr_bit = %s gdbarch_dump: read_pc = <%s> gdbarch_dump: short_bit = %s gdbarch_dump: sp_regnum = %s info.bfd_arch_info != NULL byte-order bfd_arch_info num_regs register_name skip_prologue inner_than breakpoint_from_pc print_insn displaced_step_free_closure displaced_step_location !arch->initialized_p gdbarch->data == NULL When non-zero, architecture debugging is enabled. Architecture debugging is %s. data->index < gdbarch->nr_data /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/gdbarch.c gdbarch->data[data->index] != NULL gdbarch->data[data->index] == NULL gdbarch->fast_tracepoint_valid_at != NULL gdbarch_fast_tracepoint_valid_at called gdbarch->has_shared_address_space != NULL gdbarch_has_shared_address_space called gdbarch_has_global_breakpoints called gdbarch_has_global_solist called gdbarch->get_syscall_number != NULL gdbarch_get_syscall_number called gdbarch->record_special_symbol != NULL gdbarch_record_special_symbol called gdbarch->get_siginfo_type != NULL gdbarch_get_siginfo_type called gdbarch->target_signal_to_host != NULL gdbarch_target_signal_to_host called gdbarch->target_signal_from_host != NULL gdbarch_target_signal_from_host called gdbarch->process_record_signal != NULL gdbarch_process_record_signal called gdbarch->process_record != NULL gdbarch_process_record called gdbarch_sofun_address_maybe_missing called gdbarch->static_transform_name != NULL gdbarch_static_transform_name called gdbarch->core_read_description != NULL gdbarch_core_read_description called gdbarch->overlay_update != NULL gdbarch_overlay_update called gdbarch->displaced_step_location != NULL gdbarch_displaced_step_location called gdbarch->displaced_step_free_closure != NULL gdbarch_displaced_step_free_closure called gdbarch->displaced_step_fixup != NULL gdbarch_displaced_step_fixup called gdbarch->displaced_step_hw_singlestep != NULL gdbarch_displaced_step_hw_singlestep called gdbarch->displaced_step_copy_insn != NULL gdbarch_displaced_step_copy_insn called gdbarch_max_insn_length called gdbarch->skip_permanent_breakpoint != NULL gdbarch_skip_permanent_breakpoint called gdbarch_vtable_function_descriptors called gdbarch->gcore_bfd_target != 0 gdbarch_gcore_bfd_target called gdbarch->core_pid_to_str != NULL gdbarch_core_pid_to_str called gdbarch->core_xfer_shared_libraries != NULL gdbarch_core_xfer_shared_libraries called gdbarch_core_regset_sections called gdbarch_core_reg_section_encodes_pid called gdbarch->regset_from_core_section != NULL gdbarch_regset_from_core_section called gdbarch->fetch_pointer_argument != NULL gdbarch_fetch_pointer_argument called gdbarch->register_reggroup_p != NULL gdbarch_register_reggroup_p called gdbarch->address_class_name_to_type_flags != NULL gdbarch_address_class_name_to_type_flags called gdbarch->address_class_type_flags_to_name != NULL gdbarch_address_class_type_flags_to_name called gdbarch->address_class_type_flags != NULL gdbarch_address_class_type_flags called gdbarch_have_nonsteppable_watchpoint called gdbarch_cannot_step_breakpoint called gdbarch->coff_make_msymbol_special != NULL gdbarch_coff_make_msymbol_special called gdbarch->elf_make_msymbol_special != NULL gdbarch_elf_make_msymbol_special called gdbarch->in_function_epilogue_p != NULL gdbarch_in_function_epilogue_p called gdbarch->in_solib_return_trampoline != NULL gdbarch_in_solib_return_trampoline called gdbarch->skip_solib_resolver != NULL gdbarch_skip_solib_resolver called gdbarch->skip_trampoline_code != NULL gdbarch_skip_trampoline_code called gdbarch->single_step_through_delay != NULL gdbarch_single_step_through_delay called gdbarch->software_single_step != NULL gdbarch_software_single_step called gdbarch->smash_text_address != NULL gdbarch_smash_text_address called gdbarch->addr_bits_remove != NULL gdbarch_addr_bits_remove called gdbarch->convert_from_func_ptr_addr != NULL gdbarch_convert_from_func_ptr_addr called gdbarch_frame_red_zone_size called gdbarch->stabs_argument_has_addr != NULL gdbarch_stabs_argument_has_addr called gdbarch->frame_num_args != NULL gdbarch_frame_num_args called gdbarch_frame_args_skip called gdbarch->fetch_tls_load_module_address != NULL gdbarch_fetch_tls_load_module_address called gdbarch->remote_register_number != NULL gdbarch_remote_register_number called gdbarch_deprecated_function_start_offset called gdbarch_decr_pc_after_break called gdbarch->memory_remove_breakpoint != NULL gdbarch_memory_remove_breakpoint called gdbarch->memory_insert_breakpoint != NULL gdbarch_memory_insert_breakpoint called gdbarch->adjust_breakpoint_address != NULL gdbarch_adjust_breakpoint_address called gdbarch->remote_breakpoint_from_pc != NULL gdbarch_remote_breakpoint_from_pc called gdbarch->breakpoint_from_pc != NULL gdbarch_breakpoint_from_pc called gdbarch->skip_main_prologue != NULL gdbarch_skip_main_prologue called gdbarch->skip_prologue != NULL gdbarch->integer_to_address != NULL gdbarch_integer_to_address called gdbarch->address_to_pointer != NULL gdbarch_address_to_pointer called gdbarch->pointer_to_address != NULL gdbarch_pointer_to_address called gdbarch->value_from_register != NULL gdbarch_value_from_register called gdbarch->value_to_register != NULL gdbarch_value_to_register called gdbarch->register_to_value != NULL gdbarch_register_to_value called gdbarch->convert_register_p != NULL gdbarch_convert_register_p called gdbarch_believe_pcc_promotion called gdbarch->get_longjmp_target != NULL gdbarch_get_longjmp_target called gdbarch->cannot_store_register != NULL gdbarch_cannot_store_register called gdbarch->cannot_fetch_register != NULL gdbarch_cannot_fetch_register called gdbarch->register_sim_regno != NULL gdbarch_register_sim_regno called gdbarch->print_vector_info != NULL gdbarch_print_vector_info called gdbarch->print_float_info != NULL gdbarch_print_float_info called gdbarch->print_registers_info != NULL gdbarch_print_registers_info called gdbarch->push_dummy_code != NULL gdbarch_push_dummy_code called gdbarch_call_dummy_location called gdbarch->push_dummy_call != NULL gdbarch_push_dummy_call called gdbarch_deprecated_fp_regnum called gdbarch->register_type != NULL gdbarch->register_name != NULL gdbarch->dwarf2_reg_to_regnum != NULL gdbarch_dwarf2_reg_to_regnum called gdbarch->sdb_reg_to_regnum != NULL gdbarch_sdb_reg_to_regnum called gdbarch->ecoff_reg_to_regnum != NULL gdbarch_ecoff_reg_to_regnum called gdbarch->stab_reg_to_regnum != NULL gdbarch_stab_reg_to_regnum called gdbarch_num_pseudo_regs called gdbarch->pseudo_register_write != NULL gdbarch_pseudo_register_write called gdbarch->pseudo_register_read != NULL gdbarch_pseudo_register_read called gdbarch->virtual_frame_pointer != NULL gdbarch_virtual_frame_pointer called gdbarch_long_double_format called gdbarch_long_double_bit called gdbarch_bits_big_endian called gdbarch_byte_order_for_code called gdbarch: Attempt to register unknown architecture (%d) gdbarch: Duplicate registraration of architecture (%s) register_gdbarch_init (%s, %s) gdbarch_architecture_names: multi-arch unknown gdbarch_dump: GDB_NM_FILE = %s gdbarch_dump: addr_bits_remove = <%s> gdbarch_dump: gdbarch_address_class_name_to_type_flags_p() = %d gdbarch_dump: address_class_name_to_type_flags = <%s> gdbarch_dump: gdbarch_address_class_type_flags_p() = %d gdbarch_dump: address_class_type_flags = <%s> gdbarch_dump: gdbarch_address_class_type_flags_to_name_p() = %d gdbarch_dump: address_class_type_flags_to_name = <%s> gdbarch_dump: address_to_pointer = <%s> gdbarch_dump: gdbarch_adjust_breakpoint_address_p() = %d gdbarch_dump: adjust_breakpoint_address = <%s> gdbarch_dump: believe_pcc_promotion = %s gdbarch_dump: bfd_arch_info = %s gdbarch_dump: bits_big_endian = %s gdbarch_dump: breakpoint_from_pc = <%s> gdbarch_dump: byte_order = %s gdbarch_dump: byte_order_for_code = %s gdbarch_dump: call_dummy_location = %s gdbarch_dump: cannot_fetch_register = <%s> gdbarch_dump: cannot_step_breakpoint = %s gdbarch_dump: cannot_store_register = <%s> gdbarch_dump: char_signed = %s gdbarch_dump: coff_make_msymbol_special = <%s> gdbarch_dump: convert_from_func_ptr_addr = <%s> gdbarch_dump: convert_register_p = <%s> gdbarch_dump: gdbarch_core_pid_to_str_p() = %d gdbarch_dump: core_pid_to_str = <%s> gdbarch_dump: gdbarch_core_read_description_p() = %d gdbarch_dump: core_read_description = <%s> gdbarch_dump: core_reg_section_encodes_pid = %s gdbarch_dump: core_regset_sections = %s gdbarch_dump: gdbarch_core_xfer_shared_libraries_p() = %d gdbarch_dump: core_xfer_shared_libraries = <%s> gdbarch_dump: decr_pc_after_break = %s gdbarch_dump: deprecated_fp_regnum = %s gdbarch_dump: deprecated_function_start_offset = %s gdbarch_dump: gdbarch_displaced_step_copy_insn_p() = %d gdbarch_dump: displaced_step_copy_insn = <%s> gdbarch_dump: gdbarch_displaced_step_fixup_p() = %d gdbarch_dump: displaced_step_fixup = <%s> gdbarch_dump: displaced_step_free_closure = <%s> gdbarch_dump: displaced_step_hw_singlestep = <%s> gdbarch_dump: displaced_step_location = <%s> gdbarch_dump: double_bit = %s gdbarch_dump: double_format = %s gdbarch_dump: gdbarch_dummy_id_p() = %d gdbarch_dump: dummy_id = <%s> gdbarch_dump: dwarf2_reg_to_regnum = <%s> gdbarch_dump: ecoff_reg_to_regnum = <%s> gdbarch_dump: elf_make_msymbol_special = <%s> gdbarch_dump: fast_tracepoint_valid_at = <%s> gdbarch_dump: gdbarch_fetch_pointer_argument_p() = %d gdbarch_dump: fetch_pointer_argument = <%s> gdbarch_dump: gdbarch_fetch_tls_load_module_address_p() = %d gdbarch_dump: fetch_tls_load_module_address = <%s> gdbarch_dump: float_format = %s gdbarch_dump: fp0_regnum = %s gdbarch_dump: gdbarch_frame_align_p() = %d gdbarch_dump: frame_align = <%s> gdbarch_dump: frame_args_skip = %s gdbarch_dump: gdbarch_frame_num_args_p() = %d gdbarch_dump: frame_num_args = <%s> gdbarch_dump: frame_red_zone_size = %s gdbarch_dump: gdbarch_gcore_bfd_target_p() = %d gdbarch_dump: gcore_bfd_target = %s gdbarch_dump: gdbarch_get_longjmp_target_p() = %d gdbarch_dump: get_longjmp_target = <%s> gdbarch_dump: gdbarch_get_siginfo_type_p() = %d gdbarch_dump: get_siginfo_type = <%s> gdbarch_dump: gdbarch_get_syscall_number_p() = %d gdbarch_dump: get_syscall_number = <%s> gdbarch_dump: has_global_breakpoints = %s gdbarch_dump: has_global_solist = %s gdbarch_dump: has_shared_address_space = <%s> gdbarch_dump: have_nonsteppable_watchpoint = %s gdbarch_dump: in_function_epilogue_p = <%s> gdbarch_dump: in_solib_return_trampoline = <%s> gdbarch_dump: inner_than = <%s> gdbarch_dump: gdbarch_integer_to_address_p() = %d gdbarch_dump: integer_to_address = <%s> gdbarch_dump: long_double_bit = %s gdbarch_dump: long_double_format = %s gdbarch_dump: long_long_bit = %s gdbarch_dump: gdbarch_max_insn_length_p() = %d gdbarch_dump: max_insn_length = %s gdbarch_dump: memory_insert_breakpoint = <%s> gdbarch_dump: memory_remove_breakpoint = <%s> gdbarch_dump: num_pseudo_regs = %s gdbarch_dump: gdbarch_overlay_update_p() = %d gdbarch_dump: overlay_update = <%s> gdbarch_dump: pointer_to_address = <%s> gdbarch_dump: gdbarch_print_float_info_p() = %d gdbarch_dump: print_float_info = <%s> gdbarch_dump: print_insn = <%s> gdbarch_dump: print_registers_info = <%s> gdbarch_dump: gdbarch_print_vector_info_p() = %d gdbarch_dump: print_vector_info = <%s> gdbarch_dump: gdbarch_process_record_p() = %d gdbarch_dump: process_record = <%s> gdbarch_dump: gdbarch_process_record_signal_p() = %d gdbarch_dump: process_record_signal = <%s> gdbarch_dump: gdbarch_pseudo_register_read_p() = %d gdbarch_dump: pseudo_register_read = <%s> gdbarch_dump: gdbarch_pseudo_register_write_p() = %d gdbarch_dump: pseudo_register_write = <%s> gdbarch_dump: gdbarch_push_dummy_call_p() = %d gdbarch_dump: push_dummy_call = <%s> gdbarch_dump: gdbarch_push_dummy_code_p() = %d gdbarch_dump: push_dummy_code = <%s> gdbarch_dump: qsupported = %s gdbarch_dump: gdbarch_read_pc_p() = %d gdbarch_dump: gdbarch_record_special_symbol_p() = %d gdbarch_dump: record_special_symbol = <%s> gdbarch_dump: register_name = <%s> gdbarch_dump: register_reggroup_p = <%s> gdbarch_dump: register_sim_regno = <%s> gdbarch_dump: register_to_value = <%s> gdbarch_dump: gdbarch_register_type_p() = %d gdbarch_dump: register_type = <%s> gdbarch_dump: gdbarch_regset_from_core_section_p() = %d gdbarch_dump: regset_from_core_section = <%s> gdbarch_dump: remote_breakpoint_from_pc = <%s> gdbarch_dump: remote_register_number = <%s> gdbarch_dump: gdbarch_return_value_p() = %d gdbarch_dump: return_value = <%s> gdbarch_dump: sdb_reg_to_regnum = <%s> gdbarch_dump: gdbarch_single_step_through_delay_p() = %d gdbarch_dump: single_step_through_delay = <%s> gdbarch_dump: gdbarch_skip_main_prologue_p() = %d gdbarch_dump: skip_main_prologue = <%s> gdbarch_dump: gdbarch_skip_permanent_breakpoint_p() = %d gdbarch_dump: skip_permanent_breakpoint = <%s> gdbarch_dump: skip_prologue = <%s> gdbarch_dump: skip_solib_resolver = <%s> gdbarch_dump: skip_trampoline_code = <%s> gdbarch_dump: smash_text_address = <%s> gdbarch_dump: gdbarch_software_single_step_p() = %d gdbarch_dump: software_single_step = <%s> gdbarch_dump: sofun_address_maybe_missing = %s gdbarch_dump: stab_reg_to_regnum = <%s> gdbarch_dump: stabs_argument_has_addr = <%s> gdbarch_dump: gdbarch_static_transform_name_p() = %d gdbarch_dump: static_transform_name = <%s> gdbarch_dump: target_desc = %s gdbarch_dump: target_signal_from_host = <%s> gdbarch_dump: target_signal_to_host = <%s> gdbarch_dump: gdbarch_unwind_pc_p() = %d gdbarch_dump: unwind_pc = <%s> gdbarch_dump: gdbarch_unwind_sp_p() = %d gdbarch_dump: unwind_sp = <%s> gdbarch_dump: value_from_register = <%s> gdbarch_dump: value_to_register = <%s> gdbarch_dump: vbit_in_delta = %s gdbarch_dump: virtual_frame_pointer = <%s> gdbarch_dump: vtable_function_descriptors = %s gdbarch_dump: gdbarch_write_pc_p() = %d gdbarch_dump: write_pc = <%s> gdbarch_find_by_info: info.bfd_arch_info %s gdbarch_find_by_info: info.byte_order %d (%s) gdbarch_find_by_info: info.osabi %d (%s) gdbarch_find_by_info: info.abfd %s gdbarch_find_by_info: info.tdep_info %s gdbarch_find_by_info: No matching architecture gdbarch_find_by_info: Target rejected architecture gdbarch_find_by_info: Previous architecture %s (%s) selected (*list) != NULL && (*list)->gdbarch == new_gdbarch gdbarch_find_by_info: New architecture %s (%s) selected verify_gdbarch: the following are invalid ...%s deprecated_target_gdbarch_select_hack gdbarch_find_by_info gdbarch_data deprecated_set_gdbarch_data gdbarch_qsupported gdbarch_fast_tracepoint_valid_at gdbarch_has_shared_address_space gdbarch_has_global_breakpoints gdbarch_has_global_solist gdbarch_get_syscall_number gdbarch_get_syscall_number_p gdbarch_record_special_symbol gdbarch_record_special_symbol_p gdbarch_get_siginfo_type gdbarch_get_siginfo_type_p gdbarch_target_signal_to_host gdbarch_target_signal_from_host gdbarch_process_record_signal gdbarch_process_record_signal_p gdbarch_process_record gdbarch_process_record_p gdbarch_sofun_address_maybe_missing gdbarch_static_transform_name gdbarch_static_transform_name_p gdbarch_core_read_description gdbarch_core_read_description_p gdbarch_overlay_update gdbarch_overlay_update_p gdbarch_displaced_step_location gdbarch_displaced_step_free_closure gdbarch_displaced_step_fixup gdbarch_displaced_step_fixup_p gdbarch_displaced_step_hw_singlestep gdbarch_displaced_step_copy_insn gdbarch_displaced_step_copy_insn_p gdbarch_max_insn_length gdbarch_max_insn_length_p gdbarch_skip_permanent_breakpoint gdbarch_skip_permanent_breakpoint_p gdbarch_vbit_in_delta gdbarch_vtable_function_descriptors gdbarch_gcore_bfd_target gdbarch_gcore_bfd_target_p gdbarch_core_pid_to_str gdbarch_core_pid_to_str_p gdbarch_core_xfer_shared_libraries gdbarch_core_xfer_shared_libraries_p gdbarch_core_regset_sections gdbarch_core_reg_section_encodes_pid gdbarch_regset_from_core_section gdbarch_regset_from_core_section_p gdbarch_fetch_pointer_argument gdbarch_fetch_pointer_argument_p gdbarch_register_reggroup_p gdbarch_address_class_name_to_type_flags gdbarch_address_class_name_to_type_flags_p gdbarch_address_class_type_flags_to_name gdbarch_address_class_type_flags_to_name_p gdbarch_address_class_type_flags gdbarch_address_class_type_flags_p gdbarch_have_nonsteppable_watchpoint gdbarch_cannot_step_breakpoint gdbarch_coff_make_msymbol_special gdbarch_elf_make_msymbol_special gdbarch_in_function_epilogue_p gdbarch_in_solib_return_trampoline gdbarch_skip_solib_resolver gdbarch_skip_trampoline_code gdbarch_print_insn gdbarch_single_step_through_delay gdbarch_single_step_through_delay_p gdbarch_software_single_step gdbarch_software_single_step_p gdbarch_smash_text_address gdbarch_addr_bits_remove gdbarch_convert_from_func_ptr_addr gdbarch_frame_red_zone_size gdbarch_stabs_argument_has_addr gdbarch_frame_align gdbarch_frame_align_p gdbarch_frame_num_args gdbarch_frame_num_args_p gdbarch_unwind_sp gdbarch_unwind_sp_p gdbarch_unwind_pc gdbarch_unwind_pc_p gdbarch_frame_args_skip gdbarch_fetch_tls_load_module_address gdbarch_fetch_tls_load_module_address_p gdbarch_remote_register_number gdbarch_deprecated_function_start_offset gdbarch_decr_pc_after_break gdbarch_memory_remove_breakpoint gdbarch_memory_insert_breakpoint gdbarch_adjust_breakpoint_address gdbarch_adjust_breakpoint_address_p gdbarch_remote_breakpoint_from_pc gdbarch_breakpoint_from_pc gdbarch_inner_than gdbarch_skip_main_prologue gdbarch_skip_main_prologue_p gdbarch_skip_prologue gdbarch_return_value gdbarch_return_value_p gdbarch_integer_to_address gdbarch_integer_to_address_p gdbarch_address_to_pointer gdbarch_pointer_to_address gdbarch_value_from_register gdbarch_value_to_register gdbarch_register_to_value gdbarch_convert_register_p gdbarch_believe_pcc_promotion gdbarch_get_longjmp_target gdbarch_get_longjmp_target_p gdbarch_cannot_store_register gdbarch_cannot_fetch_register gdbarch_register_sim_regno gdbarch_print_vector_info gdbarch_print_vector_info_p gdbarch_print_float_info gdbarch_print_float_info_p gdbarch_print_registers_info gdbarch_push_dummy_code gdbarch_push_dummy_code_p gdbarch_call_dummy_location gdbarch_push_dummy_call gdbarch_push_dummy_call_p gdbarch_deprecated_fp_regnum gdbarch_dummy_id gdbarch_dummy_id_p gdbarch_register_type gdbarch_register_type_p gdbarch_register_name gdbarch_dwarf2_reg_to_regnum gdbarch_sdb_reg_to_regnum gdbarch_ecoff_reg_to_regnum gdbarch_stab_reg_to_regnum gdbarch_fp0_regnum gdbarch_ps_regnum gdbarch_pc_regnum gdbarch_sp_regnum gdbarch_num_pseudo_regs gdbarch_num_regs gdbarch_pseudo_register_write gdbarch_pseudo_register_write_p gdbarch_pseudo_register_read gdbarch_pseudo_register_read_p gdbarch_virtual_frame_pointer gdbarch_write_pc gdbarch_write_pc_p gdbarch_read_pc gdbarch_read_pc_p gdbarch_char_signed gdbarch_addr_bit gdbarch_ptr_bit gdbarch_long_double_format gdbarch_long_double_bit gdbarch_double_format gdbarch_double_bit gdbarch_float_format gdbarch_float_bit gdbarch_long_long_bit gdbarch_long_bit gdbarch_int_bit gdbarch_short_bit gdbarch_bits_big_endian gdbarch_target_desc gdbarch_osabi gdbarch_byte_order_for_code gdbarch_byte_order gdbarch_bfd_arch_info gdbarch_free alloc_gdbarch_data Show endianness of target. Set endianness of target. endian info->bfd_arch_info != NULL Show architecture of target. Set architecture of target. processor set_endian: bad value The target endianness is set automatically (currently big endian) The target endianness is set automatically (currently little endian) The target is assumed to be big endian The target is assumed to be little endian Selected architecture %s is not compatible with reported target architecture %s Selected architecture %s is ambiguous with reported target architecture %s /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/arch-utils.c The target architecture is set automatically (currently %s) The target architecture is assumed to be %s Architecture of file not recognized. gdbarch_update_p: Architecture not found gdbarch_update_p: Architecture %s (%s) unchanged gdbarch_update_p: New architecture %s (%s) selected initialize_current_architecture: No arch initialize_current_architecture: Arch not found initialize_current_architecture: Selection of initial architecture failed could not select an architecture automatically set_architecture: bfd_scan_arch failed Architecture `%s' not recognized. set_endian: architecture update failed Little endian target not supported by GDB Big endian target not supported by GDB No virtual frame pointer available regnum >= 0 && regnum < gdbarch_num_regs (gdbarch) big little auto gdbarch_info_fill legacy_register_sim_regno When enabled, ranking of the functions is displayed. Show debugging of C++ overloading. Set debugging of C++ overloading. Show resolution of opaque struct/class/union types (if set before loading symbols). Set resolution of opaque struct/class/union types (if set before loading symbols). Debugging of C++ overloading is %s. Resolution of opaque struct/class/union types (if set before loading symbols) is %s. TYPE_ADDRESS_CLASS_ALL (chain) == 0 /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/gdbtypes.c TYPE_INSTANCE_FLAGS (ntype) == TYPE_INSTANCE_FLAGS (type) TYPE_CODE (type) == TYPE_CODE_FLAGS TYPE_OBJFILE (type) == TYPE_OBJFILE (storage) TYPE_OBJFILE (*typeptr) == TYPE_OBJFILE (type) code == TYPE_CODE_STRUCT || code == TYPE_CODE_UNION floatformats[0] != NULL && floatformats[1] != NULL TYPE_OBJFILE (type) == objfile Unexpected type field location kind: %d [%d] bitpos %d bitsize %d type virtual_field_bits (%d bits at * private_field_bits (%d bits at * protected_field_bits (%d bits at * !(flags & (TYPE_FLAG_MIN - 1)) This context has class, struct or union %s, not an enum. This context has class, struct or enum %s, not a union. This context has class, union or enum %s, not a struct. ------ Arg is %s [%d], parm is %s [%d] is not a structure or union type. Internal: Cannot demangle mangled name `%s'. Unknown address space specifier: "%s" overload opaque-type-resolution objfile != NULL bitpos < TYPE_NFIELDS (type) bitpos >= 0 floatformats != NULL bit >= 0 TYPE_OBJFILE_OWNED (type) type node tagname '%s' ( code 0x%x (TYPE_CODE_UNDEF) (TYPE_CODE_PTR) (TYPE_CODE_ARRAY) (TYPE_CODE_STRUCT) (TYPE_CODE_UNION) (TYPE_CODE_ENUM) (TYPE_CODE_FLAGS) (TYPE_CODE_FUNC) (TYPE_CODE_INT) (TYPE_CODE_FLT) (TYPE_CODE_VOID) (TYPE_CODE_SET) (TYPE_CODE_RANGE) (TYPE_CODE_STRING) (TYPE_CODE_BITSTRING) (TYPE_CODE_ERROR) (TYPE_CODE_MEMBERPTR) (TYPE_CODE_METHODPTR) (TYPE_CODE_METHOD) (TYPE_CODE_REF) (TYPE_CODE_CHAR) (TYPE_CODE_BOOL) (TYPE_CODE_COMPLEX) (TYPE_CODE_TYPEDEF) (TYPE_CODE_TEMPLATE) (TYPE_CODE_TEMPLATE_ARG) (TYPE_CODE_NAMESPACE) (UNKNOWN TYPE CODE) objfile gdbarch target_type pointer_type reference_type type_chain instance_flags 0x%x TYPE_FLAG_CONST TYPE_FLAG_VOLATILE TYPE_FLAG_CODE_SPACE TYPE_FLAG_DATA_SPACE TYPE_FLAG_ADDRESS_CLASS_1 TYPE_FLAG_ADDRESS_CLASS_2 TYPE_FLAG_UNSIGNED TYPE_FLAG_NOSIGN TYPE_FLAG_STUB TYPE_FLAG_TARGET_STUB TYPE_FLAG_STATIC TYPE_FLAG_PROTOTYPED TYPE_FLAG_INCOMPLETE TYPE_FLAG_VARARGS TYPE_FLAG_VECTOR TYPE_FIXED_INSTANCE TYPE_STUB_SUPPORTED TYPE_NOTTEXT nfields %d (undefined) low %s%s high %s%s vptr_basetype vptr_fieldno %d cplus_stuff n_baseclasses %d nfn_fields %d nfn_fields_total %d fn_fieldlists [%d] name '%s' ( ) length %d [%d] physname '%s' ( args fcontext is_const %d is_volatile %d is_private %d is_protected %d is_stub %d voffset %u gnat_stuff floatformat { calling_convention %d __CORE_ADDR No enum type named %s. No union type named %s. No struct type named %s. stub type has NULL name has no component named No template type named %s. No type named %s. double complex _Decimal32 _Decimal64 _Decimal128 true character int0_t uint8_t uint16_t uint32_t uint64_t uint128_t (void) _Z % 6 G X i z x 1 E V g @ @ @ = ( > = m ^ ^ ^ ^ ^ ^ ( ( ^ ( ( ( ^ E ^ ^ X ^ $ G arch_composite_type append_flags_type_flag arch_float_type copy_type copy_type_recursive init_type check_typedef make_qualified_type replace_type make_cv_type alloc_type_arch alloc_type The current OS ABI is "%s". The default OS ABI is "%s". Updating OS ABI failed. FreeBSD notesz <= MAX_NOTESZ .note.ABI-tag GNU .note.netbsd.ident NetBSD .note.openbsd.ident OpenBSD .note.netbsdcore.procinfo non- Show OS ABI of target. Set OS ABI of target. osabi SVR4 GNU/Hurd Solaris OSF/1 GNU/Linux FreeBSD a.out FreeBSD ELF NetBSD a.out NetBSD ELF OpenBSD ELF Windows CE DJGPP Irix Interix HP/UX ELF HP/UX SOM QNX Neutrino Cygwin AIX DICOS Darwin The current OS ABI is "auto" (currently "%s"). Invalid OS ABI "%s" passed to command handler. /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/osabi.c generic_elf_osabi_sniff_abi_tag_sections: unknown OS number %d A handler for the OS ABI "%s" is not built into this configuration of GDB. Attempting to continue with the default %s settings. gdbarch_lookup_osabi: invalid OS ABI (%d) from sniffer for architecture %s flavour %d gdbarch_lookup_osabi: multiple %sspecific OS ABI match for architecture %s flavour %d: first match "%s", second match "%s" _initialize_gdb_osabi: gdb_osabi_names[] is inconsistent gdbarch_register_osabi: An attempt to register a handler for OS ABI "%s" for architecture %s was made. The handler will not be registered gdbarch_register_osabi: A handler for OS ABI "%s" has already been registered for architecture %s # , 5 % J ! ' W ) \ ) e ) m ) s ) } ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ( check_note gdbarch_register_osabi Conditions for redistributing copies of GDB. Various kinds of warranty you do not have. 15. Disclaimer of Warranty. THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. Limitation of Liability. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF 17. Interpretation of Sections 15 and 16. If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright (C) 2007 Free Software Foundation, Inc. Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The GNU General Public License is a free, copyleft license for software and other kinds of works. The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do these things. To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others. For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they Developers that use the GNU GPL protect your rights with two steps: (1) assert copyright on the software, and (2) offer you this License giving you legal permission to copy, distribute and/or modify it. For the developers' and authors' protection, the GPL clearly explains that there is no warranty for this free software. For both users' and authors' sake, the GPL requires that modified versions be marked as changed, so that their problems will not be attributed erroneously to authors of previous versions. Some devices are designed to deny users access to install or run modified versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users' freedom to change the software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as needed to protect the freedom of users. Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program non-free. The precise terms and conditions for copying, distribution and TERMS AND CONDITIONS "This License" refers to version 3 of the GNU General Public License. "Copyright" also means copyright-like laws that apply to other kinds of works, such as semiconductor masks. "The Program" refers to any copyrightable work licensed under this License. Each licensee is addressed as "you". "Licensees" and "recipients" may be individuals or organizations. To "modify" a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than the making of an exact copy. The resulting work is called a "modified version" of the earlier work or a work "based on" the earlier work. A "covered work" means either the unmodified Program or a work based To "propagate" a work means to do anything with it that, without permission, would make you directly or secondarily liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation includes copying, distribution (with or without modification), making available to the public, and in some countries other activities as well. To "convey" a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with a user through a computer network, with no transfer of a copy, is not conveying. An interactive user interface displays "Appropriate Legal Notices" to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion. The "source code" for a work means the preferred form of the work for making modifications to it. "Object code" means any non-source A "Standard Interface" means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language. The "System Libraries" of an executable work include anything, other than the work as a whole, that (a) is included in the normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to the public in source code form. A "Major Component", in this context, means a major essential component (kernel, window system, and so on) of the specific operating system (if any) on which the executable work runs, or a compiler used to produce the work, or an object code interpreter used to run it. The "Corresponding Source" for a work in object code form means all the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including scripts to control those activities. However, it does not include the work's System Libraries, or general-purpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work. For example, Corresponding Source includes interface definition files associated with source files for the work, and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as by intimate data communication or control flow between those subprograms and other parts of the work. The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding The Corresponding Source for a work in source code form is that All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law. You may make, run and propagate covered works that you do not convey, without conditions so long as your license otherwise remains in force. You may convey covered works to others for the sole purpose of having them make modifications exclusively for you, or provide you with facilities for running those works, provided that you comply with the terms of this License in conveying all material for which you do not control copyright. Those thus making or running the covered works for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you. Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed; section 10 3. Protecting Users' Legal Rights From Anti-Circumvention Law. No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim any intention to limit operation or modification of the work as a means of enforcing, against the work's users, your or third parties' legal rights to forbid circumvention of 4. Conveying Verbatim Copies. You may convey verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence of any warranty; and give all recipients a copy of this License along with the Program. You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a fee. 5. Conveying Modified Source Versions. You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source code under the terms of section 4, provided that you also meet all of these conditions: a) The work must carry prominent notices stating that you modified it, and giving a relevant date. b) The work must carry prominent notices stating that it is released under this License and any conditions added under section 7. This requirement modifies the requirement in section 4 to "keep intact all notices". c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy. This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, regardless of how they are packaged. This License gives no permission to license the work in any other way, but it does not invalidate such permission if you have separately received it. d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so. A compilation of a covered work with other separate and independent works, which are not by their nature extensions of the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or distribution medium, is called an "aggregate" if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation's users beyond what the individual works permit. Inclusion of a covered work in an aggregate does not cause this License to apply to the other 6. Conveying Non-Source Forms. You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machine-readable Corresponding Source under the terms of this License, a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange. b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by a written offer, valid for at least three years and valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at no charge. c) Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source. This alternative is allowed only occasionally and noncommercially, and only if you received the object code with such an offer, in accord d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge. You need not require recipients to copy the Corresponding Source along with the object code. If the place to copy the object code is a network server, the Corresponding Source may be on a different server (operated by you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object code saying where to find the Corresponding Source. Regardless of what server hosts the Corresponding Source, you remain obligated to ensure that it is available for as long as needed to satisfy these requirements. e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d. A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work. A "User Product" is either (1) a "consumer product", which means any tangible personal property which is normally used for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage. For a particular product received by a particular user, "normally used" refers to a typical or common use of that class of product, regardless of the status of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the product. A product is a consumer product regardless of whether the product has substantial commercial, industrial or non-consumer uses, unless such uses represent the only significant mode of use of the product. "Installation Information" for a User Product means any methods, procedures, authorization keys, or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source. The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because If you convey an object code work under this section in, or with, or specifically for use in, a User Product, and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term (regardless of how the transaction is characterized), the Corresponding Source conveyed under this section must be accompanied by the Installation Information. But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product (for example, the work has The requirement to provide Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network. Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, reading or copying. "Additional permissions" are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under applicable law. If additional permissions apply only to part of the Program, that part may be used separately under those permissions, but the entire Program remains governed by this License without regard to the additional permissions. When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify the work.) You may place additional permissions on material, added by you to a covered work, for which you have or can give appropriate copyright permission. Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement the terms of this License with terms: a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; or c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material be marked in reasonable ways as different from the original version; or d) Limiting the use for publicity purposes of names of licensors or authors of the material; or e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or f) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modified versions of it) with contractual assumptions of liability to the recipient, for any liability that these contractual assumptions directly impose on those licensors and authors. All other non-permissive additional terms are considered "further restrictions" within the meaning of section 10. If the Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term. If a license document contains a further restriction but permits relicensing or conveying under this License, you may add to a covered work material governed by the terms of that license document, provided that the further restriction does not survive such relicensing or conveying. If you add terms to a covered work in accord with this section, you must place, in the relevant source files, a statement of the additional terms that apply to those files, or a notice indicating where to find the applicable terms. Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as exceptions; the above requirements apply either way. You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation. Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to receive new licenses for the same 9. Acceptance Not Required for Having Copies. You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These actions infringe copyright if you do not accept this License. Therefore, by modifying or propagating a covered work, you indicate your acceptance of this License to do so. 10. Automatic Licensing of Downstream Recipients. Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License. An "entity transaction" is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party's predecessor in interest had or could give under the previous paragraph, plus a right to possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts. You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License. For example, you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it. A "contributor" is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor's "contributor version". A contributor's "essential patent claims" are all patent claims owned or controlled by the contributor, whether already acquired or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or selling its contributor version, but do not include claims that would be infringed only as a consequence of further modification of the contributor version. For purposes of this definition, "control" includes the right to grant patent sublicenses in a manner consistent with the requirements of Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor's essential patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version. In the following three paragraphs, a "patent license" is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). To "grant" such a patent license to a party means to make such an agreement or commitment not to enforce a If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not available for anyone to copy, free of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange to deprive yourself of the benefit of the patent license for this particular work, or (3) arrange, in a manner consistent with the requirements of this License, to extend the patent license to downstream recipients. "Knowingly relying" means you have actual knowledge that, but for the patent license, your conveying the covered work in a country, or your recipient's use of the covered work in a country, would infringe one or more identifiable patents in that country that you have reason to believe are valid. If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use, propagate, modify or convey a specific copy of the covered work, then the patent license you grant is automatically extended to all recipients of the covered A patent license is "discriminatory" if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the non-exercise of one or more of the rights that are specifically granted under this License. You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software, under which you make payment to the third party based on the extent of your activity of conveying the work, and under which the third party grants, to any of the parties who would receive the covered work from you, a discriminatory patent license (a) in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in connection with specific products or compilations that contain the covered work, unless you entered into that arrangement, or that patent license was granted, prior to 28 March 2007. Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law. 12. No Surrender of Others' Freedom. If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program, the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program. 13. Use with the GNU Affero General Public License. Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the 14. Revised Versions of this License. The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies that a certain numbered version of the GNU General Public License "or any later version" applies to it, you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of the GNU General Public License, you may choose any version ever published by the Free Software Foundation. If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used, that proxy's public statement of acceptance of a version permanently authorizes you to choose that version for the Program. Later license versions may give you additional or different permissions. However, no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a copying warranty SUCH DAMAGES. your programs, too. know their rights. modification follow. 0. Definitions. on the Program. 1. Source Code. form of a work. Source. same work. 2. Basic Permissions. makes it unnecessary. technological measures. parts of the aggregate. in one of these ways: with subsection 6b. modification has been made. been installed in ROM). 7. Additional Terms. 8. Termination. paragraph of section 11). your receipt of the notice. material under section 10. 11. Patents. this License. patent against the party. work and works based on it. combination as such. later version. Define attributes for memory region or reset memory region handling to target-based. Usage: mem auto mem [], where may be rw (read/write), ro (read-only) or wo (write-only), may be 8, 16, 32, or 64, and may be cache or nocache Enable memory region. Arguments are the code numbers of the memory regions to enable. Usage: enable mem Do "info mem" to see current list of code numbers. Disable memory region. Arguments are the code numbers of the memory regions to disable. Usage: disable mem Do "info mem" to see current list of code numbers. Delete memory region. Arguments are the code numbers of the memory regions to delete. Usage: delete mem Do "info mem" to see current list of code numbers. If on, and some memory map is defined, debugger will emit errors on accesses to memory not defined in the memory map. If off, accesses to all memory addresses will be allowed. Show handling of unknown memory regions. Set handling of unknown memory regions. Unknown memory addresses will be treated as inaccessible. Unknown memory addresses will be treated as RAM. Using memory regions provided by the target. Using user-defined memory regions. There are no memory regions defined. Switching to manual control of memory regions; use "mem auto" to fetch regions from the target again. /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/memattr.c Arguments must be memory region numbers. region bounds not 16 bit aligned region bounds not 32 bit aligned region bounds not 64 bit aligned invalid memory region: low >= high Memory region attributes set mem Memory regions settings show mem inaccessible-by-default Num Enb Low Addr High Addr Attrs %-3d %-3c 0x100000000 0x10000000000000000 rw wo flash blocksize 0x%x 8 16 32 64 nocache No memory region number %d. Delete all memory regions? No mem no lo address no hi address rw wo nocache unknown attribute: %s overlapping memory region VEC_mem_region_s_quick_push VEC_mem_region_s_ordered_remove VEC_mem_region_s_index VEC_mem_region_s_quick_insert Software breakpoints not implemented for this target. "monitor" command not supported by this target. Command not implemented for this target. Don't know how to %s. Try "help target". You can't do that without a process to debug. You can't do that when your target is `%s' Controlling the inferior in asynchronous mode is %s. target_watchpoint_addr_within_range (0x%lx, 0x%lx, %d) = %d Mode for reading from readonly sections is %s. Cache use for stack accesses is %s. target_pid_to_exec_file (%d) = %s target_has_exited (%d, %d, %d) = %d target_remove_exec_catchpoint (%d) = %d target_insert_exec_catchpoint (%d) target_remove_vfork_catchpoint (%d) = %d target_insert_vfork_catchpoint (%d) target_remove_fork_catchpoint (%d) = %d target_insert_fork_catchpoint (%d) target_acknowledge_created_inferior (%d) target_lookup_symbol (%s, xxx) target_terminal_info (%s, %d) target_terminal_ours_for_output () target_remove_watchpoint (0x%lx, %d, %d) = %ld target_insert_watchpoint (0x%lx, %d, %d) = %ld target_remove_hw_breakpoint (0x%lx, xxx) = %ld target_insert_hw_breakpoint (0x%lx, xxx) = %ld target_stopped_data_address ([0x%lx]) = %ld target_stopped_by_watchpoint () = %ld target_region_ok_for_hw_watchpoint (%ld, %ld) = 0x%lx target_can_use_hw_breakpoint (%ld, %ld, %ld) = %ld target_remove_breakpoint (0x%lx, xxx) = %ld target_insert_breakpoint (0x%lx, xxx) = %ld While running this, GDB does not access memory from... No saved terminal information. target_post_startup_inferior (%d) target_core_of_thread (%d) = %d target_thread_alive (%d) = %d target_wait (%d, status) = %d, %s could not find a target to attach /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/target.c The "%s" target does not support "run". Try "help target" or "continue". could not find a target to follow fork target_create_inferior (%s, %s, xxx, %d) could not find a target to create inferior target_thread_address_space (%s) = %d Can't determine the current address space of thread %s could not find a target to follow mourn inferiour could not find a target to detach Writing to flash memory forbidden in this context %s:target_xfer_partial (%d, %s, %s, %s, %s, %s) = %s object != TARGET_OBJECT_MEMORY target object %d, annex %s, contained unexpected null characters Unable to allocate memory to perform the search. Unable to access target memory at %s, halting search. target_search_memory (%s, ...) Overlapping regions in memory map: ignoring Cannot find thread-local variables in this thread library. Cannot find shared library `%s' in dynamic linker's load module list Cannot find executable file `%s' in dynamic linker's load module list The inferior has not yet allocated storage for thread-local variables in the shared library `%s' for %s The inferior has not yet allocated storage for thread-local variables in the executable `%s' for %s Cannot find thread-local storage for %s, shared library %s: %s Cannot find thread-local storage for %s, executable file %s: %s Cannot find thread-local variables on this target Attempt to unpush the dummy target pop_all_targets couldn't find target %s pop_target couldn't find target %s Magic number of %s target struct wrong When non-zero, target debugging is enabled. Higher numbers are more verbose. Changes do not take effect until the next "run" or "target" command. When this mode is on, memory reads from readonly sections (such as .text) will be read from the object file instead of from the target. This will result in significant performance improvement for remote targets. Show mode for reading from readonly sections. Set mode for reading from readonly sections. Send a command to the remote monitor (remote targets only). Print the name of each layer of the internal target stack. Tells gdb whether to control the inferior in asynchronous mode. Show whether gdb controls the inferior in asynchronous mode. Set whether gdb controls the inferior in asynchronous mode. When on, use the data cache for all stack access, regardless of any configured memory regions. This improves remote performance significantly. By default, caching for stack access is on. Show cache use for stack access. Set cache use for stack access. target_thread_architecture (%s) = %s [%s] target_xfer_memory (%s, xxx, %d, %s, xxx) = %d Connect to a target machine or process. The first argument is the type or protocol of the target machine. Remaining arguments are interpreted by the target protocol. For more information on the arguments for a particular protocol, type `help target ' followed by the protocol name. Argument required (target name). Try `help target' Target debugging is %s. The current target stack is: - %s (%s) target_rcmd (%s, ...) target_can_run () = %d target_load (%s, %d) target_terminal_save_ours () target_terminal_ours () target_terminal_inferior () target_terminal_init () target_files_info (xxx) target_prepare_to_store () target_post_attach (%d) target_find_new_threads () target_close (%d) target_open (%s, %d) target_flash_done target_get_section_table () target_kill () Symbols from "%s". target_notice_signals (%d) target_store_registers target_fetch_registers status->kind = %sexited, status = %d %sstopped, signal = %s %ssignalled, signal = %s %sloaded %sforked %svforked %sexecd %sentered syscall %sexited syscall %sspurious %signore %sno-history %sunknown??? target_attach (%s, %d) No targets found target_follow_fork (%d) = %d process %d target_stop (%s) aspace target_mourn_inferior () target_disconnect (%s, %d) target_detach (%s, %d) ops->to_xfer_partial != NULL , bytes = (none) get OS data keep_len == pattern_len - 1 = %d len <= sizeof (buf) target_flash_erase (%s, %s) target_memory_map () TLS load module not found Program not killed. None Show target debugging. Set target debugging. trust-readonly-sections monitor target-stack target-async stack-cache target target_resume (%d, %s, %s) 3. P. u. . . . . - . / / 4/ . target_thread_address_space simple_search_memory get_target_memory_unsigned target_read_alloc_1 target_xfer_partial target_read_string When non-zero, the internal representation of expressions will be printed. When non-zero, expression parser tracing will be enabled. before conversion to prefix form ?error in operator_length_standard Show expression debugging. Set expression debugging. Show parser debugging. Set parser debugging. parser Parser debugging is %s. Expression debugging is %s. Unknown FILE used. expression to compute Junk after end of expression. my x x x x x x {x V % % % 4 4 4 # q # # @ @ J J # J @ # # 4 R ` P PG Unknown ] = warn Range checking is "%s". Type checking is "%s". set check %-16s Use the %c%s language check show check case-sensitive Current language: %s Type checking: %s Range checking: %s Case sensitivity: %s local !@#$%^&*()+=|~`}{[]"';:?/>.<,- internal error - unimplemented function unk_lang_value_print called. internal error - unimplemented function unk_lang_val_print called. internal error - unimplemented function unk_lang_print_type called. internal error - unimplemented function unk_lang_printstr called. internal error - unimplemented function unk_lang_printchar called. internal error - unimplemented function unk_lang_emit_char called. Attempted to parse an expression with unknown language Getting a string is unsupported in this language. Unrecognized case-sensitive setting. /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/language.c Case sensitivity in name search is "auto; currently %s". Case sensitivity in name search is "%s". the current case sensitivity setting does not match the language. Unrecognized range check setting. Range checking is "auto; currently %s". the current range check setting does not match the language. Unrecognized type check setting. Type checking is "auto; currently %s". the current type check setting does not match the language. Unrecognized case-sensitive setting: "%s" Unrecognized range check setting: "%s" Unrecognized type check setting: "%s" "set check" must be followed by the name of a check subcommand. Magic number of %s language struct wrong Set the current source language. The currently understood settings are: local or auto Automatic setting based on source file Show the current source language. Set the status of the type/range checker. Show the status of the type/range checker. Show type checking. (on/warn/off/auto) Set type checking. (on/warn/off/auto) Show range checking. (on/warn/off/auto) Set range checking. (on/warn/off/auto) For Fortran the default is off; for other languages the default is on. Show case sensitivity in name search. (on/off/auto) Set case sensitivity in name search. (on/off/auto) The current source language is "auto; currently %s". The current source language is "%s". Couldn't find language `%s' in known languages list. ) + 0 * @ v } ' PG A p d * p 5 ` ` G % 0 * @ v } ' PG A p d * p 5 ` ` , * 0 * @ v } ' PG A p d * p 5 ` ` ! pending_addrmap context_stack_depth > 0 block at %s out of order /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/buildsym.c block end address less than block start address in %s (patched it) block end address %s less than block start address %s (patched it) inner block not inside outer block in %s inner block (%s-%s) not inside outer block (%s-%s) Context stack not empty in end_symtab mainsub_alias != NULL && mainsub_alias != mainsub buildsym_init pop_context watch_main_source_file_lossage start_symtab Search memory for a sequence of bytes. Usage: find [/size-char] [/max-count] start-address, end-address, expr1 [, expr2 ...] find [/size-char] [/max-count] start-address, +length, expr1 [, expr2 ...] size-char is one of b,h,w,g for 8,16,32,64 bit values respectively, and if not specified the size is taken from the type of the expression in the current language. Note that this means for example that in the case of C-like languages a search for an untyped 0x42 will search for "(int) 0x42" which is typically four bytes. The address of the last match is stored as the value of "$_". Convenience variable "$numfound" is set to the number of matches. /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/findcmd.c Invalid search space, end preceeds start. Overflow in address range computation, choose smaller range. Search space too small to contain pattern. bits % 8 == 0 Missing search parameters. Invalid size granularity. Empty search range. Invalid length. Search space too large. Missing search pattern. numfound %d pattern%s found. Pattern not found. put_bits Standard register ``$ps'' is not available for this target Standard register ``$sp'' is not available for this target TARGET_SIGNAL_MAGIC Signal 0 SIGHUP Hangup SIGINT Interrupt SIGQUIT SIGILL Illegal instruction SIGTRAP Trace/breakpoint trap SIGABRT Aborted SIGEMT Emulation trap SIGFPE Arithmetic exception SIGKILL Killed SIGBUS Bus error SIGSEGV Segmentation fault SIGSYS Bad system call SIGPIPE Broken pipe SIGALRM Alarm clock SIGTERM Terminated SIGURG Urgent I/O condition SIGSTOP Stopped (signal) SIGTSTP Stopped (user) SIGCONT Continued SIGCHLD Child status changed SIGTTIN Stopped (tty input) SIGTTOU Stopped (tty output) SIGIO I/O possible SIGXCPU CPU time limit exceeded SIGXFSZ File size limit exceeded SIGVTALRM Virtual timer expired SIGPROF Profiling timer expired SIGWINCH Window size changed SIGLOST Resource lost SIGUSR1 User defined signal 1 SIGUSR2 User defined signal 2 SIGPWR Power fail/restart SIGPOLL Pollable event occurred SIGWIND SIGPHONE SIGWAITING Process's LWPs are blocked SIGLWP Signal LWP SIGDANGER Swap space dangerously low SIGGRANT Monitor mode granted SIGRETRACT SIGMSG Monitor mode data available SIGSOUND Sound completed SIGSAK Secure attention SIGPRIO SIG33 Real-time event 33 SIG34 Real-time event 34 SIG35 Real-time event 35 SIG36 Real-time event 36 SIG37 Real-time event 37 SIG38 Real-time event 38 SIG39 Real-time event 39 SIG40 Real-time event 40 SIG41 Real-time event 41 SIG42 Real-time event 42 SIG43 Real-time event 43 SIG44 Real-time event 44 SIG45 Real-time event 45 SIG46 Real-time event 46 SIG47 Real-time event 47 SIG48 Real-time event 48 SIG49 Real-time event 49 SIG50 Real-time event 50 SIG51 Real-time event 51 SIG52 Real-time event 52 SIG53 Real-time event 53 SIG54 Real-time event 54 SIG55 Real-time event 55 SIG56 Real-time event 56 SIG57 Real-time event 57 SIG58 Real-time event 58 SIG59 Real-time event 59 SIG60 Real-time event 60 SIG61 Real-time event 61 SIG62 Real-time event 62 SIG63 Real-time event 63 SIGCANCEL LWP internal signal SIG32 Real-time event 32 SIG64 Real-time event 64 SIG65 Real-time event 65 SIG66 Real-time event 66 SIG67 Real-time event 67 SIG68 Real-time event 68 SIG69 Real-time event 69 SIG70 Real-time event 70 SIG71 Real-time event 71 SIG72 Real-time event 72 SIG73 Real-time event 73 SIG74 Real-time event 74 SIG75 Real-time event 75 SIG76 Real-time event 76 SIG77 Real-time event 77 SIG78 Real-time event 78 SIG79 Real-time event 79 SIG80 Real-time event 80 SIG81 Real-time event 81 SIG82 Real-time event 82 SIG83 Real-time event 83 SIG84 Real-time event 84 SIG85 Real-time event 85 SIG86 Real-time event 86 SIG87 Real-time event 87 SIG88 Real-time event 88 SIG89 Real-time event 89 SIG90 Real-time event 90 SIG91 Real-time event 91 SIG92 Real-time event 92 SIG93 Real-time event 93 SIG94 Real-time event 94 SIG95 Real-time event 95 SIG96 Real-time event 96 SIG97 Real-time event 97 SIG98 Real-time event 98 SIG99 Real-time event 99 SIG100 Real-time event 100 SIG101 Real-time event 101 SIG102 Real-time event 102 SIG103 Real-time event 103 SIG104 Real-time event 104 SIG105 Real-time event 105 SIG106 Real-time event 106 SIG107 Real-time event 107 SIG108 Real-time event 108 SIG109 Real-time event 109 SIG110 Real-time event 110 SIG111 Real-time event 111 SIG112 Real-time event 112 SIG113 Real-time event 113 SIG114 Real-time event 114 SIG115 Real-time event 115 SIG116 Real-time event 116 SIG117 Real-time event 117 SIG118 Real-time event 118 SIG119 Real-time event 119 SIG120 Real-time event 120 SIG121 Real-time event 121 SIG122 Real-time event 122 SIG123 Real-time event 123 SIG124 Real-time event 124 SIG125 Real-time event 125 SIG126 Real-time event 126 SIG127 Real-time event 127 SIGINFO Information request Unknown signal EXC_BAD_ACCESS Could not access memory EXC_BAD_INSTRUCTION Illegal instruction/operand EXC_ARITHMETIC EXC_EMULATION Emulation instruction EXC_SOFTWARE Software generated exception EXC_BREAKPOINT o O E y o % A e Y z A 9 / z + s * | * * * * * l & * * * * * * * * * * * & * - * 4 * > * F * Y * ` * p * x * * * * * * * * * * * * * * * & * . * B * J * _ * e * r * z * * * * * * * * * * * & * . * D * L * b * i * | * * * * * * * * * * * * * * ( * * 3 * : * V * _ * o * v * * * * * * * * * * * * * * * % * + * > * D * W * ] * p * v * * * * * * * * * * * * * * % * 8 * > * Q * W * j * p * * * * * * * * * * * * * * * 2 * 8 * K * Q * d * j * } * * * * * * * * * * * * * * 1 * 7 * J * P * c * i * | * * * * * * * * * * * * * * + * 1 * D * J * ] * c * v * | * * * * * * * * * * * * * % * + * > * D * W * ] * p * v * * * * * * * * * * * * * * % * 8 * > * Q * X * l * s * * * * * * * * * * * * * ) * 0 * D * K * _ * f * z * * * * * * * * * * * * * # * 7 * > * R * Y * m * t * * * * * * * * * * * * * * * 1 * E * M * a * * p * * * * * * * * * * $ * C ' _ * /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/common/signals.c Only signals 1-15 are valid as numeric signals. Use "info signals" for a list of symbolic signals. GDB bug: target.c (target_signal_from_host): unrecognized real-time signal Signal %s does not exist on this system. Need to relinquish monitor mode Internal error: printing TARGET_SIGNAL_DEFAULT Step program backward until it reaches the beginning of another source line. Argument N means do this N times (or till program stops for another reason). Step program backward, proceeding through subroutine calls. Like the "reverse-step" command as long as subroutine calls do not happen; when they do, the call is treated as one instruction. Argument N means do this N times (or till program stops for another reason). Step backward exactly one instruction. Argument N means do this N times (or till program stops for another reason). Step backward one instruction, but proceed through called subroutines. Argument N means do this N times (or till program stops for another reason). Continue program being debugged but run it in reverse. If proceeding from breakpoint, a number N may be used as an argument, which means to set the ignore count of that breakpoint to N - 1 (so that the breakpoint won't break until the Nth time it is reached). Execute backward until just before selected stack frame is called. Set a bookmark in the program's execution history. A bookmark represents a point in the execution history that can be returned to at a later point in the debug session. Status of user-settable bookmarks. Bookmarks are user-settable markers representing a point in the execution history that can be returned to later in the same debug session. Delete a bookmark from the bookmark list. Argument is a bookmark number, or no argument to delete all bookmarks. Go to an earlier-bookmarked point in the program's execution history. Argument is the bookmark number of a bookmark saved earlier by using the 'bookmark' command, or the special arguments: start (beginning of recording) end (end of recording) goto-bookmark: no bookmark found for '%s'. delete bookmark: no bookmark found for '%s'. Bookmark Address Opaque ID Data Already in reverse mode. Use '%s' or 'set exec-dir forward'. rsi rni bookmarks goto-bookmark Command requires an argument. Unbalanced quotes: %s No bookmarks. Delete all bookmarks? No bookmarks. %d %s '%s' target_get_bookmark failed. Saved bookmark %d at %s (not applicable) %3d%% b < c->num_buckets stringi < c->unique_count Cached '%s' statistics: Total object count: %ld Unique object count: %lu Total object size: %ld Unique object size: %ld Max entry size: %d Average entry size: Median entry size: %d %3lu /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/bcache.c Percentage of duplicates, by count: Percentage of duplicates, by size: Total memory used by bcache, including overhead: %ld Percentage memory overhead: Net memory savings: Hash table size: %3d Hash table expands: %lu Hash table hashes: %lu Half hash misses: %lu Hash table population: Median hash chain length: %3d Average hash chain length: Maximum hash chain length: %3d print_bcache_statistics ? ? # @ Bmaintenance maintenance maintenance info maintenance print dump-me msymbols psymbols objfiles psymtabs check-symtabs translate-address undeprecate Show watchdog timer. Set watchdog timer. watchdog When enabled GDB is profiled. Show internal profiling. Set internal profiling. profile Internal profiling is %s. Watchdog timer is %s. Unknown section %s. %s + %s in section %s of %s %s + %s in section %s %s + %s no symbol at %s Can't demangle "%s" Should GDB dump core? %s ->%s ALLOC LOAD RELOC READONLY CODE DATA ROM CONSTRUCTOR HAS_CONTENTS NEVER_LOAD COFF_SHARED_LIBRARY IS_COMMON Exec file: `%s', ALLOBJ Object file: %s Core file: Commands for use by GDB maintainers. Includes commands to dump specific internal GDB structures in a human readable form, to cause GDB to deliberately dump core, to test internal functions such as the C++/ObjC demangler, etc. Commands for showing internal info about the program being debugged. List the BFD sections of the exec and core files. Arguments may be any combination of: [one or more section names] ALLOC LOAD RELOC READONLY CODE DATA ROM CONSTRUCTOR HAS_CONTENTS NEVER_LOAD COFF_SHARED_LIBRARY IS_COMMON Sections matching any argument will be listed (no argument implies all sections). In addition, the special argument ALLOBJ lists all sections from all object files, including shared libraries. Maintenance command for printing GDB internal state. Set GDB internal variables used by the GDB maintainer. Configure variables internal to GDB that aid in GDB's maintenance Show GDB internal variables used by the GDB maintainer. Configure variables internal to GDB that aid in GDB's maintenance Get fatal error; make debugger dump its core. GDB sets its handling of SIGQUIT back to SIG_DFL and then sends itself a SIGQUIT signal. Give GDB an internal error. Cause GDB to behave as if an internal error was detected. Give GDB an internal warning. Cause GDB to behave as if an internal warning was reported. Demangle a C++/ObjC mangled name. Call internal GDB demangler routine to demangle a C++ link name and prints the result. Set the display of time usage. If nonzero, will cause the execution time for each command to be displayed, following the command's output. Set the display of space usage. If nonzero, will cause the execution space for each command to be displayed, following the command's output. Print a type chain for a given symbol. For each node in a type chain, print the raw data for each member of the type structure, and the interpretation of the data. Print dump of current symbol definitions. Entries in the full symbol table are dumped to file OUTFILE. If a SOURCE file is specified, dump only that file's symbols. Print dump of current minimal symbol definitions. Entries in the minimal symbol table are dumped to file OUTFILE. If a SOURCE file is specified, dump only that file's minimal symbols. Print dump of current partial symbol definitions. Entries in the partial symbol table are dumped to file OUTFILE. If a SOURCE file is specified, dump only that file's partial symbols. Print dump of current object file definitions. List the full symbol tables for all object files. This does not include information about individual symbols, blocks, or linetables --- just the symbol table structures themselves. With an argument REGEXP, list the symbol tables whose names that match that. List the partial symbol tables for all object files. This does not include information about individual partial symbols, just the symbol table structures themselves. Print statistics about internal gdb state. Print the internal architecture configuration. Takes an optional file parameter. Check consistency of psymtabs and symtabs. Translate a section name and address to a symbol. Deprecate a command. Note that this is just in here so the testsuite can check the command deprecator. You probably shouldn't use this, rather you should use the C function deprecate_cmd(). If you decide you want to use it: maintenance deprecate 'commandname' "replacement". The replacement is optional. Undeprecate a command. Note that this is just in here so the testsuite can check the command deprecator. You probably shouldn't use this, If you decide you want to use it: maintenance undeprecate 'commandname' When non-zero, this timeout is used instead of waiting forever for a target to finish a low-level step or continue operation. If the specified amount of time passes without a response from the target, an error occurs. Can't find command '%s' to deprecate. "maintenance undeprecate" takes an argument, the command you want to undeprecate. "maintenance deprecate" takes an argument, the command you want to deprecate, and optionally the replacement command enclosed in quotes. /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/maint.c requires argument (address or section + address) Need to specify and sect->the_bfd_section && sect->the_bfd_section->name sect->objfile && sect->objfile->name "maintenance space" takes a numeric argument. "maintenance time" takes a numeric argument. "maintenance demangle" takes an argument to demangle. "maintenance set" must be followed by the name of a set command. "maintenance print" must be followed by the name of a print command. "maintenance info" must be followed by the name of an info command. "maintenance" must be followed by the name of a maintenance command. maintenance_translate_address The current C++ demangling style is "%s". Unknown demangling style `%s'. The currently understood settings are: `%s' style demangling chosen as the default. Use `set demangle-style' without arguments for a list of demangling styles. Show the current C++ demangling style. Set the current C++ demangling style. %-10s %s demangle-style function `%s' appears to be defined outside of all compilation units bad string table offset in symbol %d "repeated" header file %s not previously seen, at symtab pos %d N_LBRAC/N_RBRAC symbol mismatch at symtab pos %d Premature end of file reading symbol table /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/dbxread.c Can't find .text section in symbol file ridiculous string table size (%d bytes). misplaced N_LBRAC entry; discarding local symbols which have no enclosing block block start larger than block end unmatched N_LBRAC before symtab pos %d Psymtab for %s already read in. Shouldn't happen. First symbol in segment of executable not a source symbol string table offset backs up at %d N_BINCL %s not in entries for any file, at symtab pos %d unknown symbol descriptor `%c' stabsect_build_psymtabs: Found stabs (%s), but not string section (%s) Can't find %s section in symbol file ridiculous string table size: %d bytes Can't find any code sections in symbol file unknown symbol type %s __DYNAMIC stabs and Reading in symbols for %s... som coff epoc-pe nlm a a a a a a a a a a a a a a a a a a a ^ a ^ a a a 6 a a a a a a a a a a a a a Q a a a a a a 2 a $ a A a a a a a a a a a a a a a a a a a a a a a a a a D a a a a a a a a a a a a a a a a a a a a a a a a a a a a Q a a a a a a a a a a a a a a a a a a a a a a a a a a a a a & a a a a a a a a a a a a a a a a a a a a a a a a a a a ~ a a a a a a a a a a a a a a a a a a a a a a a a a a a a a n a a a a a a a a a a a a a a a a a a a a a a a a a a a E P P P ( ( ( ( ( ( ( " 1 ( l ( P ( ( % & z) ' ' K( $ /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/coffread.c Symbol table entry for %s has bad tagndx value `.bf' symbol %d has no aux entry Bad coff function information. `.ef' symbol without matching `.bf' symbol ignored starting at symnum %d Unmatched .ef symbol(s) ignored starting at symnum %d `.ef' symbol %d has no aux entry Line number pointer %ld lower than start of line numbers `.eb' symbol without matching `.bb' symbol ignored starting at symnum %d Mismatched .eb symbol ignored starting at symnum %d The debugging information in `%s' is corrupted. The file has a `.stabs' section, but no `.stabstr' section. "%s": error reading line numbers. %s: error reading symbols Unexpected type for symbol %s Bad n_sclass for symbol %s LI% LF% LC% LP% LPB% LBB% LBE% LPBX% .bf .ef .bb .eb "%s": can't get string table /A D E iD D B B C C C C A MD E D D B ? pe-x86-64 pei-x86-64 pe-i386 pei-i386 pe-arm-wince-little pei-arm-wince-little /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/coff-pe-read.c t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t t | O} | H} A} :} 3} ,} %} } } } } } | | | | | | | | | | | | | | | | | | | D # # # # D p p p ^ 7 z 1 1 1 $ . 8 B L V ` j t ~ ( 2 < F P Z d n x " , 6 @ J T ^ h r | & 0 : D N X b l v * 4 > H R \ f p z $ . 8 B L V ` 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 j t ~ 1 1 1 1 1 1 1 1 1 p 9 a _ G + 9 | _ n n p V 0 R , p V n n n n n n n n n V 3 3 D 3 D 3 3 3 3 3 3 3 3 3 3 3 3 3 3 D 3 3 ' D 3 3 3 3 3 3 3 3 3 ' 3 3 ' 3 3 3 Q 3 3 3 3 3 3 3 3 3 3 3 3 3 D e ! ! , N , 0 { N v ( q B y h + { q g ] S I ? 5 + ! d3 3 d3 4 4 p5 5 z5 5 4 4 3 d3 3 5 3 7 7 ; 7 ; : 7 7 7 7 \: 7 7 7 7 7 7 7 7 ; 7 7 : ; 7 7 7 7 7 e9 7 7 ; /9 7 7 /9 7 7 7 8 7 7 7 7 7 8 7 7 7 7 7 9 7 7 7 ; 9 = = C = D = = = GE = = = = = = = = = = C = = > C = = > = = > :B = = > = = > = = = = = = = = = > = = = = = = = = = C vB GE = = = = = = B munmap_section_buffer dump_die_1 create_debug_types_hash_table dwarf2_find_containing_comp_unit follow_die_ref load_full_comp_unit read_comp_unit load_partial_comp_unit read_checked_initial_length_and_offset read_signatured_type_at_offset lookup_signatured_type_at_offset read_signatured_type dwarf2_symbol_mark_computed follow_die_sig set_die_type vtable _vptr read_tag_pointer_type new_symbol dwarf2_get_section_info DW_TAG_PGI_interface_block DW_TAG_ DW_TAG_padding DW_TAG_array_type DW_TAG_class_type DW_TAG_entry_point DW_TAG_enumeration_type DW_TAG_formal_parameter DW_TAG_imported_declaration DW_TAG_label DW_TAG_lexical_block DW_TAG_member DW_TAG_pointer_type DW_TAG_reference_type DW_TAG_compile_unit DW_TAG_string_type DW_TAG_structure_type DW_TAG_subroutine_type DW_TAG_typedef DW_TAG_union_type DW_TAG_unspecified_parameters DW_TAG_variant DW_TAG_common_block DW_TAG_common_inclusion DW_TAG_inheritance DW_TAG_inlined_subroutine DW_TAG_module DW_TAG_ptr_to_member_type DW_TAG_set_type DW_TAG_subrange_type DW_TAG_with_stmt DW_TAG_access_declaration DW_TAG_base_type DW_TAG_catch_block DW_TAG_const_type DW_TAG_constant DW_TAG_enumerator DW_TAG_file_type DW_TAG_friend DW_TAG_namelist DW_TAG_namelist_item DW_TAG_packed_type DW_TAG_subprogram DW_TAG_template_type_param DW_TAG_template_value_param DW_TAG_thrown_type DW_TAG_try_block DW_TAG_variant_part DW_TAG_variable DW_TAG_volatile_type DW_TAG_dwarf_procedure DW_TAG_restrict_type DW_TAG_interface_type DW_TAG_namespace DW_TAG_imported_module DW_TAG_unspecified_type DW_TAG_partial_unit DW_TAG_imported_unit DW_TAG_condition DW_TAG_shared_type DW_TAG_type_unit DW_TAG_MIPS_loop DW_TAG_HP_array_descriptor DW_TAG_format_label DW_TAG_function_template DW_TAG_class_template DW_TAG_GNU_BINCL DW_TAG_GNU_EINCL DW_TAG_upc_shared_type DW_TAG_upc_strict_type DW_TAG_upc_relaxed_type DW_TAG_PGI_kanji_type DW_FORM_sig8 DW_FORM_ DW_FORM_addr DW_FORM_block2 DW_FORM_block4 DW_FORM_data2 DW_FORM_data4 DW_FORM_data8 DW_FORM_string DW_FORM_block DW_FORM_block1 DW_FORM_data1 DW_FORM_flag DW_FORM_sdata DW_FORM_strp DW_FORM_udata DW_FORM_ref_addr DW_FORM_ref1 DW_FORM_ref2 DW_FORM_ref4 DW_FORM_ref8 DW_FORM_ref_udata DW_FORM_indirect DW_FORM_sec_offset DW_FORM_exprloc DW_FORM_flag_present maintenance set dwarf2 dwarf2 maintenance show dwarf2 max-cache-age dwarf2-die parent at offset: 0x%x has children: %s attributes: DW_AT_PGI_lstride DW_AT_ DW_AT_sibling DW_AT_location DW_AT_name DW_AT_ordering DW_AT_subscr_data DW_AT_byte_size DW_AT_bit_offset DW_AT_bit_size DW_AT_element_list DW_AT_stmt_list DW_AT_low_pc DW_AT_high_pc DW_AT_language DW_AT_member DW_AT_discr DW_AT_discr_value DW_AT_visibility DW_AT_string_length DW_AT_common_reference DW_AT_comp_dir DW_AT_const_value DW_AT_containing_type DW_AT_default_value DW_AT_inline DW_AT_is_optional DW_AT_lower_bound DW_AT_producer DW_AT_prototyped DW_AT_return_addr DW_AT_start_scope DW_AT_bit_stride DW_AT_upper_bound DW_AT_abstract_origin DW_AT_accessibility DW_AT_address_class DW_AT_artificial DW_AT_base_types DW_AT_calling_convention DW_AT_count DW_AT_data_member_location DW_AT_decl_column DW_AT_decl_file DW_AT_decl_line DW_AT_declaration DW_AT_discr_list DW_AT_encoding DW_AT_external DW_AT_frame_base DW_AT_friend DW_AT_identifier_case DW_AT_macro_info DW_AT_namelist_items DW_AT_priority DW_AT_segment DW_AT_specification DW_AT_static_link DW_AT_type DW_AT_use_location DW_AT_variable_parameter DW_AT_virtuality DW_AT_vtable_elem_location DW_AT_allocated DW_AT_associated DW_AT_data_location DW_AT_byte_stride DW_AT_entry_pc DW_AT_use_UTF8 DW_AT_extension DW_AT_ranges DW_AT_trampoline DW_AT_call_column DW_AT_call_file DW_AT_call_line DW_AT_description DW_AT_binary_scale DW_AT_decimal_scale DW_AT_small DW_AT_decimal_sign DW_AT_digit_count DW_AT_picture_string DW_AT_mutable DW_AT_threads_scaled DW_AT_explicit DW_AT_object_pointer DW_AT_endianity DW_AT_elemental DW_AT_pure DW_AT_recursive DW_AT_signature DW_AT_MIPS_loop_begin DW_AT_MIPS_tail_loop_begin DW_AT_MIPS_epilog_begin DW_AT_MIPS_loop_unroll_factor DW_AT_MIPS_linkage_name DW_AT_MIPS_stride DW_AT_MIPS_abstract_name DW_AT_MIPS_clone_origin DW_AT_MIPS_has_inlines DW_AT_HP_block_index DW_AT_HP_unmodifiable DW_AT_HP_actuals_stmt_list DW_AT_HP_proc_per_section DW_AT_HP_raw_data_ptr DW_AT_HP_pass_by_reference DW_AT_HP_opt_level DW_AT_HP_prof_version_id DW_AT_HP_opt_flags DW_AT_HP_cold_region_low_pc DW_AT_HP_cold_region_high_pc DW_AT_HP_linkage_name DW_AT_HP_prof_flags DW_AT_sf_names DW_AT_src_info DW_AT_mac_info DW_AT_src_coords DW_AT_body_begin DW_AT_body_end DW_AT_GNU_vector DW_AT_VMS_rtnbeg_pd_address DW_AT_upc_threads_scaled DW_AT_PGI_lbase DW_AT_PGI_soffset %s (%s) address: block: size %d constant: %s signatured type, offset: 0x%x flag: TRUE flag: FALSE die != NULL Children: low == high invalid dwarf2 offset %u ZLIB 1.2.3.3 DW_OP_HP_tls OP_ DW_OP_addr DW_OP_deref DW_OP_const1u DW_OP_const1s DW_OP_const2u DW_OP_const2s DW_OP_const4u DW_OP_const4s DW_OP_const8u DW_OP_const8s DW_OP_constu DW_OP_consts DW_OP_dup DW_OP_drop DW_OP_over DW_OP_pick DW_OP_swap DW_OP_rot DW_OP_xderef DW_OP_abs DW_OP_and DW_OP_div DW_OP_minus DW_OP_mod DW_OP_mul DW_OP_neg DW_OP_not DW_OP_or DW_OP_plus DW_OP_plus_uconst DW_OP_shl DW_OP_shr DW_OP_shra DW_OP_xor DW_OP_bra DW_OP_eq DW_OP_ge DW_OP_gt DW_OP_le DW_OP_lt DW_OP_ne DW_OP_skip DW_OP_lit0 DW_OP_lit1 DW_OP_lit2 DW_OP_lit3 DW_OP_lit4 DW_OP_lit5 DW_OP_lit6 DW_OP_lit7 DW_OP_lit8 DW_OP_lit9 DW_OP_lit10 DW_OP_lit11 DW_OP_lit12 DW_OP_lit13 DW_OP_lit14 DW_OP_lit15 DW_OP_lit16 DW_OP_lit17 DW_OP_lit18 DW_OP_lit19 DW_OP_lit20 DW_OP_lit21 DW_OP_lit22 DW_OP_lit23 DW_OP_lit24 DW_OP_lit25 DW_OP_lit26 DW_OP_lit27 DW_OP_lit28 DW_OP_lit29 DW_OP_lit30 DW_OP_lit31 DW_OP_reg0 DW_OP_reg1 DW_OP_reg2 DW_OP_reg3 DW_OP_reg4 DW_OP_reg5 DW_OP_reg6 DW_OP_reg7 DW_OP_reg8 DW_OP_reg9 DW_OP_reg10 DW_OP_reg11 DW_OP_reg12 DW_OP_reg13 DW_OP_reg14 DW_OP_reg15 DW_OP_reg16 DW_OP_reg17 DW_OP_reg18 DW_OP_reg19 DW_OP_reg20 DW_OP_reg21 DW_OP_reg22 DW_OP_reg23 DW_OP_reg24 DW_OP_reg25 DW_OP_reg26 DW_OP_reg27 DW_OP_reg28 DW_OP_reg29 DW_OP_reg30 DW_OP_reg31 DW_OP_breg0 DW_OP_breg1 DW_OP_breg2 DW_OP_breg3 DW_OP_breg4 DW_OP_breg5 DW_OP_breg6 DW_OP_breg7 DW_OP_breg8 DW_OP_breg9 DW_OP_breg10 DW_OP_breg11 DW_OP_breg12 DW_OP_breg13 DW_OP_breg14 DW_OP_breg15 DW_OP_breg16 DW_OP_breg17 DW_OP_breg18 DW_OP_breg19 DW_OP_breg20 DW_OP_breg21 DW_OP_breg22 DW_OP_breg23 DW_OP_breg24 DW_OP_breg25 DW_OP_breg26 DW_OP_breg27 DW_OP_breg28 DW_OP_breg29 DW_OP_breg30 DW_OP_breg31 DW_OP_regx DW_OP_fbreg DW_OP_bregx DW_OP_piece DW_OP_deref_size DW_OP_xderef_size DW_OP_nop DW_OP_push_object_address DW_OP_call2 DW_OP_call4 DW_OP_call_ref DW_OP_form_tls_address DW_OP_call_frame_cfa DW_OP_bit_piece DW_OP_GNU_push_tls_address DW_OP_GNU_uninit DW_OP_HP_is_value DW_OP_HP_fltconst4 DW_OP_HP_fltconst8 DW_OP_HP_mod_range DW_OP_HP_unmod_range unsupported stack op: '%s' missing .debug_line section cu->per_cu != NULL .debug_info .debug_types unknown section Read die from %s of %s: ! per_cu->from_debug_types cu->die_hash == NULL type_sig->per_cu.cu == NULL sig_type->per_cu.cu != NULL debug_pubnames debug_loc debug_macinfo partial symbol information ! this_cu->from_debug_types (anonymous class) mangled .debug_line section Signatured types: slot != NULL baton->per_cu location description GNU F77 invalid pointer size %d DW_ATE_HP_imaginary_float128 DW_ATE_ DW_ATE_void DW_ATE_address DW_ATE_boolean DW_ATE_complex_float DW_ATE_float DW_ATE_signed DW_ATE_signed_char DW_ATE_unsigned DW_ATE_unsigned_char DW_ATE_imaginary_float DW_ATE_packed_decimal DW_ATE_numeric_string DW_ATE_edited DW_ATE_signed_fixed DW_ATE_unsigned_fixed DW_ATE_decimal_float DW_ATE_HP_float80 DW_ATE_HP_complex_float80 DW_ATE_HP_float128 DW_ATE_HP_complex_float128 DW_ATE_HP_floathpintel DW_ATE_HP_imaginary_float80 unsupported accessibility %d __vfp __pfn __delta Tag '%s' has no DW_AT_import file index out of range unsupported tag: '%s' DWARF 2 common block member undefinition something-or-other non-zero command-line in-file type_sig != NULL offset == type_sig->offset type_sig->per_cu.cu != NULL Set DWARF 2 specific variables. Configure DWARF 2 variables such as the cache size Show DWARF 2 specific variables Show DWARF 2 variables such as the cache size A higher limit means that cached compilation units will be stored in memory longer, and more total memory will be used. Zero disables caching, which can slow down startup. Show the upper bound on the age of cached dwarf2 compilation units. Set the upper bound on the age of cached dwarf2 compilation units. When enabled (non-zero), DIEs are dumped after they are read in. The value is the maximum depth to print. Show debugging of the dwarf2 DIE reader. Set debugging of the dwarf2 DIE reader. The upper bound on the age of cached dwarf2 compilation units is %s. munmap ((void *) map_begin, map_length) == 0 /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/dwarf2read.c read_offset_1: bad switch [in module %s] read_address: bad switch, signed [in module %s] read_address: bad switch, unsigned [in module %s] read_comp_unit_head: dwarf from non elf file Die: %s (abbrev %d, offset 0x%x) DW_AT_MIPS_software_pipeline_depth DW_AT_HP_all_variables_modifiable constant ref: 0x%lx (adjusted) signatured type, offset: unknown string: "%s" (%s canonicalized) unexpected attribute form: DW_FORM_indirect unsupported attribute form: %d. [not printed, max nesting level reached] Dwarf Error: could not find partial DIE containing offset 0x%lx [in module %s] dwarf2_per_objfile->all_comp_units[low-1]->offset <= offset offset < this_cu->offset + this_cu->length Dwarf Error: Could not find abbrev number %d [in module %s] Dwarf Error: wrong version in compilation unit header (is %d, should be %d) [in module %s] Dwarf Error: bad offset (0x%lx) in compilation unit header (offset 0x%lx + 6) [in module %s] Dwarf Error: bad length (0x%lx) in compilation unit header (offset 0x%lx + 0) [in module %s] Dwarf Error: Can't read DWARF data from '%s' Dwarf Error: Corrupt DWARF ZLIB header from '%s' Dwarf Error: setting up DWARF uncompression in '%s': %d Dwarf Error: zlib error uncompressing from '%s': %d Dwarf Error: concluding DWARF uncompression in '%s': %d macro definition contains spaces in formal argument list: `%s' Attribute value is not a constant (%s) unsupported die ref attribute form: '%s' misplaced first line number at 0x%lx for '%s' invalid attribute class or form for '%s' in '%s' macro debug info contains a malformed macro definition: `%s' macro info runs off end of `.debug_macinfo' section const value length mismatch for '%s', got %d, expected %d location expression too complex .debug_line section has line data without a file statement list doesn't fit in .debug_line section DW_FORM_strp used without .debug_str section [in module %s] DW_FORM_strp pointing outside of .debug_str section [in module %s] missing `.debug_types' section for DW_FORM_sig8 die Dwarf Error: Cannot handle %s in DWARF reader [in module %s] Suspicious DW_AT_byte_size value treated as zero instead of %s Dwarf Error: could not find abbrev number %d [in module %s] ignoring absolute DW_AT_sibling cu_header->initial_length_size == 4 || cu_header->initial_length_size == 8 || cu_header->initial_length_size == 12 intermixed 32-bit and 64-bit DWARF sections line number info header doesn't fit in `.debug_line' section Dwarf Error: Cannot find DIE at 0x%x referenced from DIE at 0x%x [in module %s] signature == type_sig->signature Dwarf Error: Cannot find signatured DIE referenced from DIE at 0x%x [in module %s] Dwarf Error: Cannot find signatured DIE at 0x%x referenced from DIE at 0x%x [in module %s] Dwarf Error: Expected reference attribute [in module %s] Offset %d out of bounds for DW_AT_ranges attribute Invalid .debug_ranges data (no base address) malformed enumerator DIE ignored could not find partial DIE 0x%x in cache [from module %s] unhandled containing DIE tag %d for DIE at %d .debug_line section has line program sequence without an end debug type entry runs off end of `.debug_types' section, ignored offset 0x%x, signature 0x%s no compilation unit with offset %u. bad file number in macro information (%d) Location list used without specifying the CU base address. Offset %lu out of bounds for DW_AT_ranges attribute (type_flags & ~TYPE_INSTANCE_FLAG_ADDRESS_CLASS_ALL) == 0 DW_AT_type missing from DW_TAG_subrange_type DW_AT_name missing from DW_TAG_base_type unsupported DW_AT_encoding: '%s' unexpected tag in read_type_die: '%s' Dwarf Error: Cannot find type of die [in module %s] Dwarf Error: Problem turning containing type into gdb type [in module %s] Dwarf Error: Problem turning type die at offset into gdb type [in module %s] unexpected member function in Ada type member function type missing for '%s' Member function "%s" (offset %d) is virtual but the vtable offset is not specified unexpected virtuality in component of Ada type unexpected member functions in Ada type virtual function table pointer not found when defining class '%s' IBM(R) XL C/C++ Advanced Edition unsupported const value attribute form: '%s' SYMBOL_CLASS (sym) == LOC_OPTIMIZED_OUT Dwarf Error: Missing children for type unit [in module %s] DIE 0x%x and its abstract origin 0x%x have different tags Child DIE 0x%x and its abstract origin 0x%x have different tags Child DIE 0x%x and its abstract origin 0x%x have different parents Multiple children of DIE 0x%x refer to DIE 0x%x as their abstract origin Tag '%s' has unexpected children missing .debug_macinfo section debug info with no main source gives macro %s on line %d: %s debug info gives %s macro %s with %s line %d: %s debug info gives source %d included from %s at %s line %d macro debug info has an unmatched `close_file' directive no terminating 0-type entry for macros in `.debug_macinfo' section bug: psymtab for %s is already read in. Error reading symbol table: %s /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/mipsread.c .dynsym .dynstr invalid C++ abbreviation `%s' Unknown builtin type %d short real stringptr logical*1 logical*2 logical*4 logical integer*1 integer*2 integer*4 wchar logical*8 integer*8 need a type name __base_ctor __base_dtor __deleting_dtor Method has bad physname %s enum struct union FOO INVALID_CPLUSPLUS_ABBREV bad structure-type format invalid symbol name "%s" eh_throw Unknown C++ symbol name `%s' Invalid symbol data: common block within common block couldn't parse type; debugger out of date? Invalid symbol data: type number (%d,%d) out of range at symtab pos %d. GDB internal error: bad real_filenum forward-referenced types left unresolved, type code %d. Unrecognized cross-reference type `%c' Prototyped function type didn't end arguments with `#': %s invalid (minimal) member type data format at symtab pos %d. base type %d of range type is not defined GDB internal error, type is NULL in stabsread.c. Invalid (empty) method arguments const/volatile indicator missing, got '%c' member function type missing, got '%c' struct/union type gets multiply defined: %s%s Unknown virtual character `%c' for baseclass Unknown visibility `%c' for baseclass C++ abbreviated type name unknown at symtab pos %d Unknown visibility `%c' for field virtual function table pointer not found when defining class `%s' /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/stabsread.c ECOMM symbol unmatched by BCOMM %s: common block `%s' from global_sym_chain unresolved register number %d too large (max %d) in symbol %s m >n n nn entries[n - 1]->cie_pointer < cie->cie_pointer Corrupt data in %s:%s; align 4 workaround apparently succeeded Corrupt data in %s:%s; align 8 workaround apparently succeeded can't compute CFA for this frame incomplete CFI data; DW_CFA_restore unspecified register %s (#%d) at %s bad CFI data; mismatched DW_CFA_restore_state at %s Not implemented: computing unwound register using explicit value operator incomplete CFI data; unspecified registers (e.g., %s) at %s ARM/Thumb C/C++ Compiler, RVCT cie_table->num_entries == 0 Unsupported address size armcc fde->cie != NULL Corrupt data in %s:%s .eh_frame .debug_frame objfile->section_offsets fde_table->num_entries > 0 fs->initial.reg Unknown CFI encountered. fde != NULL Unknown CFA rule. Unknown register rule. ARM C Compiler, ADS Thumb C Compiler, ADS ARM C++ Compiler, ADS Thumb C++ Compiler, ADS > > > > > z ^ B m / D m ' q z } ` : P z 3 = decode_frame_entry_1 add_cie find_cie p p dwarf2_frame_find_fde dwarf2_frame_cache <+ <+ <+ <+ ;+ dwarf2_restore_rule `>+ P P P p p system__address wide_wide_character PARENT REP _parent ada__tags__dispatch_table ___XV ___ ___XVN ___XD ___XF_ ___XVL _%Lg_%Lg_%Lg_%Lg Type @ (%d) Text: `%.*s' OP_CHOICES OP_NAME OP_VAR_VALUE BINOP_IN_BOUNDS TERNOP_IN_RANGE OP_ATR_FIRST OP_ATR_LAST OP_ATR_LENGTH OP_ATR_IMAGE OP_ATR_MAX OP_ATR_MIN OP_ATR_MODULUS OP_ATR_POS OP_ATR_SIZE OP_ATR_TAG OP_ATR_VAL UNOP_QUAL UNOP_IN_RANGE OP_OTHERS OP_POSITIONAL OP_DISCRETE_RANGE OP_AGGREGATE 'range (%ld) .. '( others => short_integer long_long_integer long_long_float positive __XDLU_0__ LJM unexpected catchpoint type set ada show ada trust-PAD-over-XVS id.full_name e.full_name ___XP P_BOUNDS ___XUT ___XUT___XVE ___XVS ___XVU has no component named %s _tag Bad GNAT array descriptor `%s' Ada exception all Ada exceptions unhandled Ada exceptions failed Ada assertions ^[agis]-.*\.ad[bs]$ ___clean[.$a-zA-Z0-9_]*$ Catchpoint %d, %s at Catchpoint %d, exception at ___XE _ada_ __%s___XR cancelled Request to select 0 symbols! [0] cancel [%d] '(%s) (enumeral) [%d] %s in %s (enumeral) [%d] %s at %s:? [%d] %s (enumeral) [%d] %s at ? Multiple matches for %s adainit unhandled '%c' ["%02x"] ["%04x"] TKB TB TK__ standard__ _ada_%s Unknown lower bound, using 1. which == 0 || which == 1 ___XA invalid Ada operator name: %s %s___XVZ can't unpack array don't know bounds of array tsd ada__tags__type_specific_data expanded_name element type of array unknown cannot slice a packed array Invalid operand to '%s unimplemented type attribute argument to 'VAL out of range aggregate apparently mangled Unknown component name: %s. Misplaced 'others' clause No definition found for %s Could not find a match for %s Oadd "+" Osubtract "-" Omultiply "*" Odivide "/" Omod "mod" Orem "rem" Oexpon "**" Olt "<" Ole "<=" Ogt ">" Oge ">=" Oeq "=" One "/=" Oand "and" Oor "or" Oxor "xor" Oconcat "&" Oabs "abs" Onot "not" LB0 UB0 LB1 UB1 LB2 UB2 LB3 UB3 LB4 UB4 LB5 UB5 LB6 UB6 LB7 UB7 !@#$%^&*()+=|~`}{[]";:?/,- __gnat_debug_raise_exception __gnat_unhandled_exception __gnat_raise_nodefer_with_msg constraint_error program_error storage_error tasking_error /lib.*/libpthread\.so[.0-9]*$ /lib.*/libpthread\.a$ /lib.*/libc\.so[.0-9]*$ /lib.*/libc\.a$ first min modulus := or else and then ** abs .all 'access 'size Could not find operator name for opcode Unexpected type in ada_discrete_type_low_bound. Unexpected type in ada_discrete_type_high_bound. object size is larger than varsize-limit 'POS only defined on discrete types enumeration value is invalid: can't find 'POS Unable to find field %s in struct %s. Aborting Internal error: miscounted aggregate components. Bad GNAT array descriptor bounds Catchpoint %d: `%s' Ada exception Catchpoint %d: all Ada exceptions Catchpoint %d: unhandled Ada exceptions Catchpoint %d: failed Ada assertions /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/ada-lang.c Prefix command for changing Ada-specfic settings Generic command for showing Ada-specific settings. This is related to the encoding used by the GNAT compiler. The debugger should normally trust the contents of PAD types, but certain older versions of GNAT have a bug that sometimes causes the information in the PAD type to be incorrect. Turning this setting "off" allows the debugger to work around this bug. It is always safe to turn this option "off", but this incurs a slight performance penalty, so it is recommended to NOT change this option to "off" unless necessary. Show whether an optimization trusting PAD types over XVS types is activated Enable or disable an optimization trusting PAD types over XVS types "set ada" must be followed by the name of a setting. could not understand bit size information on packed array unexpected null name on descriptive type Type (null) is not a structure or union type is not a structure or union type has no component named invalid dimension number to '%s attempt to take bound of something that is not an array could not find bounds information on packed array could not understand bounds information on packed array failed to get exception name: %s Catchpoint %d, unhandled %s at Catchpoint %d, unhandled exception at Catchpoint %d, failed assertion at Argument must be choice number Select no more than %d of the above [%d] %s at :%d Cannot assign this kind of variant record Unable to insert catchpoint. Is this an Ada main program? Unable to insert catchpoint. Try to start the program first. Cannot insert catchpoints in this configuration. unexpected catchpoint kind (%d) Unable to break on '%s' in this configuration. Symbol "%s" is not a function (class = %d) long_integer (e) = long_integer (&standard.%s) long_integer (e) = long_integer (&%s) Invalid address for Ada main program name. Unknown upper bound, using %ld. array type with dynamic size is larger than varsize-limit Attempt to extract a component of a value that is not a record. Bounds unavailable for null array pointer. attempt to do packed indexing of something other than a packed array packed array index %ld out of bounds too many subscripts (%d expected) Invalid type size for `%s' detected: %d. Invalid type size for detected: %d. record type with dynamic size is larger than varsize-limit Fixed-point values must be assigned to fixed-point variables Incompatible types in assignment Operands of fixed-point addition must have the same type Operands of fixed-point subtraction must have the same type second operand of %s must not be zero. Attempt to compare array with non-array Unexpected unresolved symbol, %s, during evaluation cannot subscript or call something of type `%s' cannot subscript or call a record wrong number of subscripts; expecting %d Attempt to index or call something other than an array or function Membership test incompletely implemented; always returns true unexpected attribute encountered the 'length attribute applies only to array types 'modulus must be applied to modular type 'VAL only defined on discrete types 'VAL requires integral argument Attempt to dereference null array pointer. Undefined name, ambiguous name, or renaming used in component association: %s. Aggregates only allowed on the right of an assignment Left-hand side must be array or record. Invalid record component association. Index in component association out of bounds. Extra components in aggregate ignored. Internal error: bad aggregate clause Unexpected operator during name resolution __gnat_debug_raise_assert_failure system__assertions__raise_assert_failure j N D N 2 a a M ( ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ( ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' #( #( ' ' ' ' ' ) ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ) ( ( ( ) |) u) n) g) `) Y) R) K) D) =) 6) /) () !) ) ) ) ) ( i* ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) * 2* ) ) ) ) 2* 2* * ) * * ) * * H* * w* * ) u+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + ', , , , , , , , , , , , n- - 5. . . / '+ W X X PX W wX W W wX W W W wX g L L L L . # K , l ] K K K K K - < < < D D L L L - L L D H D [ [ [ [ [ [ [ [ [ [ [ [ [ x [ [ [ [ [ [ 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 > 1 7 1 w 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 7 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 } 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 E+ E+ E+ E+ E+ E+ E+ E+ E+ E+ E+ E+ E+ E+ E+ E+ F+ F+ F+ F+ F+ F+ F+ F+ "F+ &F+ +F+ 0F+ 6F+ :F+ ?F+ DF+ JF+ RF+ # VF+ [F+ K aF+ fF+ > E+ E+ G E+ E+ = ( ti+ p; d @ `: } A 0 i+ 0 0' ` P% lF+ pF+ tF+ xF+ |F+ F+ F+ F+ F+ F+ F+ F+ F+ F+ F+ F+ ada_array_bound_from_type VEC_char_ptr_quick_push F+ F+ F+ X+ > G+ F+ Y+ p= G+ 1G+ ?G+ MG+ 8B+ [G+ yG+ G+ G+ LB+ >+ G+ V& * $ + f , G+ G+ Q-' - & / & __gnat_ada_main_program_name * ) ( p' G+ G+ G+ & @F+ & _A- 6& 6& 6& Vf) + 9 % 6& s + & 6& # G+ Y6- E+ E+ G+ + & = s + G & > & ? G+ K G+ @ G+ A G+ p ? unhandled c_string_type char16_t char32_t Malformed escape sequence \x%lx "" sizeof asm minimal /home/jingyu/projects/gcc/android-toolchainsrc/build/../gdb/gdb-7.1.x/gdb/c-lang.c \x used with no following hex digits. \u used with no following hex digits Could not convert character constant to target character set Error reading string from inferior: %s Trying to read string with inappropriate type `%s'. Trying to read string with inappropriate type. \ \ a \ b \ f \ n \ r \ t \ v \ " , ' \ " \ " , < i n c o m p l e t e s e q u e n c e > . . . k + k + &j) _A- "6& 6& >+- YA- 6& 6& 6& 6& 6& Vf) + 9 % 6& s + & G+ Y6- C- + & = e- > B- ? G+ @ 6& A k+ F r + B a6- D 7- s+ 6 v @4 ( 0" ` 0 PG A n+ p 5 ` P% ( s+ 6 v @4 ( 0" ` 0 ' P " n+ p 5 P% k+ s+ 6 v @4 ( 0" ` 0 PG A n+ p 5 ` P% l+ s+ 6 v @4 ( 0" ` 0 PG A n+ p 5 ` P% R ` P PG \', \' VOID real*8 real*16 complex*8 complex*16 complex*32 fortran .OR. .AND. .NOT. .EQ. .NE. .LE. .GE. .GT. .LT. 6 6 J6 >6 5 26 &6 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Ts+ 0 * v 5 `6 `5 } @ PG A t+ p 5 ; ` ` s + s + G & & = G+ Y6- - / / _A- \s+ as+ gs+ > ms+ rs+ ws+ |s+ s+ s+ G+ @ + \", \" selectors classes print-object po _NSPrintForDebugger internal: compare_classes(1) Classes matching "%s": No classes matching "%s" Selectors matching "%s": No selectors matching "%s" type != NULL class != NULL category != NULL selector != NULL ndebug != NULL *objc_csym == objfile_csym sel_getUid sel_get_any_uid Can't find selector "%s" objc_lookUpClass objc_lookup_class _NSNewStringFromCString istr NSString stringWithCString: NXString objective-c _objc_msgSend _objc_msgSend_stret _objc_msgSendSuper _objc_msgSendSuper_stret _objc_getClass _objc_getMetaClass = = > = K= = = K= K= K= K= K= K= K= K= K= K= K= K= K= = w+ 0 * I 7 v > > = ` 0 U ^( PG A c y+ p 5 ` ` read_objc_methlist_method find_imps find_methods parse_method parse_selector &j) _A- "6& 6& >+- YA- 6& 6& 6& 6& 6& Vf) + 9 % 6& s + & G+ Y6- C- + & = e- > B- ? G+ @ 6& A k+ F r + B a6- D All Objective-C selectors, or those matching REGEXP. All Objective-C classes, or those matching REGEXP. Ask an Objective-C object to print itself. The 'print-object' command requires an argument (an Objective-C object) Unable to locate _NSPrintForDebugger in child process object returns null description
