1 /* 2 * Copyright (c) 2010 The WebM project authors. All Rights Reserved. 3 * 4 * Use of this source code is governed by a BSD-style license 5 * that can be found in the LICENSE file in the root of the source 6 * tree. An additional intellectual property rights grant can be found 7 * in the file PATENTS. All contributing project authors may 8 * be found in the AUTHORS file in the root of the source tree. 9 */ 10 11 #include "math.h" 12 #include "limits.h" 13 #include "block.h" 14 #include "onyx_int.h" 15 #include "variance.h" 16 #include "encodeintra.h" 17 #include "vp8/common/setupintrarecon.h" 18 #include "mcomp.h" 19 #include "vpx_scale/vpxscale.h" 20 #include "encodemb.h" 21 #include "vp8/common/extend.h" 22 #include "vp8/common/systemdependent.h" 23 #include "vpx_scale/yv12extend.h" 24 #include "vpx_mem/vpx_mem.h" 25 #include "vp8/common/swapyv12buffer.h" 26 #include <stdio.h> 27 #include "rdopt.h" 28 #include "vp8/common/quant_common.h" 29 #include "encodemv.h" 30 31 //#define OUTPUT_FPF 1 32 33 #if CONFIG_RUNTIME_CPU_DETECT 34 #define IF_RTCD(x) (x) 35 #else 36 #define IF_RTCD(x) NULL 37 #endif 38 39 extern void vp8_build_block_offsets(MACROBLOCK *x); 40 extern void vp8_setup_block_ptrs(MACROBLOCK *x); 41 extern void vp8cx_frame_init_quantizer(VP8_COMP *cpi); 42 extern void vp8_set_mbmode_and_mvs(MACROBLOCK *x, MB_PREDICTION_MODE mb, MV *mv); 43 extern void vp8_alloc_compressor_data(VP8_COMP *cpi); 44 45 //#define GFQ_ADJUSTMENT (40 + ((15*Q)/10)) 46 //#define GFQ_ADJUSTMENT (80 + ((15*Q)/10)) 47 #define GFQ_ADJUSTMENT vp8_gf_boost_qadjustment[Q] 48 extern int vp8_kf_boost_qadjustment[QINDEX_RANGE]; 49 50 extern const int vp8_gf_boost_qadjustment[QINDEX_RANGE]; 51 52 #define IIFACTOR 1.4 53 #define IIKFACTOR1 1.40 54 #define IIKFACTOR2 1.5 55 #define RMAX 14.0 56 #define GF_RMAX 48.0 57 58 #define KF_MB_INTRA_MIN 300 59 #define GF_MB_INTRA_MIN 200 60 61 #define DOUBLE_DIVIDE_CHECK(X) ((X)<0?(X)-.000001:(X)+.000001) 62 63 #define POW1 (double)cpi->oxcf.two_pass_vbrbias/100.0 64 #define POW2 (double)cpi->oxcf.two_pass_vbrbias/100.0 65 66 static int vscale_lookup[7] = {0, 1, 1, 2, 2, 3, 3}; 67 static int hscale_lookup[7] = {0, 0, 1, 1, 2, 2, 3}; 68 69 70 static const int cq_level[QINDEX_RANGE] = 71 { 72 0,0,1,1,2,3,3,4,4,5,6,6,7,8,8,9, 73 9,10,11,11,12,13,13,14,15,15,16,17,17,18,19,20, 74 20,21,22,22,23,24,24,25,26,27,27,28,29,30,30,31, 75 32,33,33,34,35,36,36,37,38,39,39,40,41,42,42,43, 76 44,45,46,46,47,48,49,50,50,51,52,53,54,55,55,56, 77 57,58,59,60,60,61,62,63,64,65,66,67,67,68,69,70, 78 71,72,73,74,75,75,76,77,78,79,80,81,82,83,84,85, 79 86,86,87,88,89,90,91,92,93,94,95,96,97,98,99,100 80 }; 81 82 static void find_next_key_frame(VP8_COMP *cpi, FIRSTPASS_STATS *this_frame); 83 84 static int encode_intra(VP8_COMP *cpi, MACROBLOCK *x, int use_dc_pred) 85 { 86 87 int i; 88 int intra_pred_var = 0; 89 (void) cpi; 90 91 if (use_dc_pred) 92 { 93 x->e_mbd.mode_info_context->mbmi.mode = DC_PRED; 94 x->e_mbd.mode_info_context->mbmi.uv_mode = DC_PRED; 95 x->e_mbd.mode_info_context->mbmi.ref_frame = INTRA_FRAME; 96 97 vp8_encode_intra16x16mby(IF_RTCD(&cpi->rtcd), x); 98 } 99 else 100 { 101 for (i = 0; i < 16; i++) 102 { 103 BLOCKD *b = &x->e_mbd.block[i]; 104 BLOCK *be = &x->block[i]; 105 106 vp8_encode_intra4x4block(IF_RTCD(&cpi->rtcd), x, be, b, B_DC_PRED); 107 } 108 } 109 110 intra_pred_var = VARIANCE_INVOKE(&cpi->rtcd.variance, getmbss)(x->src_diff); 111 112 return intra_pred_var; 113 } 114 115 // Resets the first pass file to the given position using a relative seek from the current position 116 static void reset_fpf_position(VP8_COMP *cpi, FIRSTPASS_STATS *Position) 117 { 118 cpi->stats_in = Position; 119 } 120 121 static int lookup_next_frame_stats(VP8_COMP *cpi, FIRSTPASS_STATS *next_frame) 122 { 123 if (cpi->stats_in >= cpi->stats_in_end) 124 return EOF; 125 126 *next_frame = *cpi->stats_in; 127 return 1; 128 } 129 130 // Calculate a modified Error used in distributing bits between easier and harder frames 131 static double calculate_modified_err(VP8_COMP *cpi, FIRSTPASS_STATS *this_frame) 132 { 133 double av_err = cpi->total_stats->ssim_weighted_pred_err; 134 double this_err = this_frame->ssim_weighted_pred_err; 135 double modified_err; 136 137 //double relative_next_iiratio; 138 //double next_iiratio; 139 //double sum_iiratio; 140 //int i; 141 142 //FIRSTPASS_STATS next_frame; 143 //FIRSTPASS_STATS *start_pos; 144 145 /*start_pos = cpi->stats_in; 146 sum_iiratio = 0.0; 147 i = 0; 148 while ( (i < 1) && input_stats(cpi,&next_frame) != EOF ) 149 { 150 151 next_iiratio = next_frame.intra_error / DOUBLE_DIVIDE_CHECK(next_frame.coded_error); 152 next_iiratio = ( next_iiratio < 1.0 ) ? 1.0 : (next_iiratio > 20.0) ? 20.0 : next_iiratio; 153 sum_iiratio += next_iiratio; 154 i++; 155 } 156 if ( i > 0 ) 157 { 158 relative_next_iiratio = sum_iiratio / DOUBLE_DIVIDE_CHECK(cpi->avg_iiratio * (double)i); 159 } 160 else 161 { 162 relative_next_iiratio = 1.0; 163 } 164 reset_fpf_position(cpi, start_pos);*/ 165 166 if (this_err > av_err) 167 modified_err = av_err * pow((this_err / DOUBLE_DIVIDE_CHECK(av_err)), POW1); 168 else 169 modified_err = av_err * pow((this_err / DOUBLE_DIVIDE_CHECK(av_err)), POW2); 170 171 /* 172 relative_next_iiratio = pow(relative_next_iiratio,0.25); 173 modified_err = modified_err * relative_next_iiratio; 174 */ 175 176 return modified_err; 177 } 178 179 static const double weight_table[256] = { 180 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 181 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 182 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 183 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 184 0.020000, 0.031250, 0.062500, 0.093750, 0.125000, 0.156250, 0.187500, 0.218750, 185 0.250000, 0.281250, 0.312500, 0.343750, 0.375000, 0.406250, 0.437500, 0.468750, 186 0.500000, 0.531250, 0.562500, 0.593750, 0.625000, 0.656250, 0.687500, 0.718750, 187 0.750000, 0.781250, 0.812500, 0.843750, 0.875000, 0.906250, 0.937500, 0.968750, 188 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 189 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 190 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 191 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 192 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 193 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 194 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 195 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 196 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 197 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 198 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 199 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 200 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 201 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 202 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 203 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 204 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 205 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 206 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 207 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 208 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 209 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 210 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 211 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000 212 }; 213 214 static double simple_weight(YV12_BUFFER_CONFIG *source) 215 { 216 int i, j; 217 218 unsigned char *src = source->y_buffer; 219 double sum_weights = 0.0; 220 221 // Loop throught the Y plane raw examining levels and creating a weight for the image 222 i = source->y_height; 223 do 224 { 225 j = source->y_width; 226 do 227 { 228 sum_weights += weight_table[ *src]; 229 src++; 230 }while(--j); 231 src -= source->y_width; 232 src += source->y_stride; 233 }while(--i); 234 235 sum_weights /= (source->y_height * source->y_width); 236 237 return sum_weights; 238 } 239 240 241 // This function returns the current per frame maximum bitrate target 242 static int frame_max_bits(VP8_COMP *cpi) 243 { 244 // Max allocation for a single frame based on the max section guidelines passed in and how many bits are left 245 int max_bits; 246 247 // For CBR we need to also consider buffer fullness. 248 // If we are running below the optimal level then we need to gradually tighten up on max_bits. 249 if (cpi->oxcf.end_usage == USAGE_STREAM_FROM_SERVER) 250 { 251 double buffer_fullness_ratio = (double)cpi->buffer_level / DOUBLE_DIVIDE_CHECK((double)cpi->oxcf.optimal_buffer_level); 252 253 // For CBR base this on the target average bits per frame plus the maximum sedction rate passed in by the user 254 max_bits = (int)(cpi->av_per_frame_bandwidth * ((double)cpi->oxcf.two_pass_vbrmax_section / 100.0)); 255 256 // If our buffer is below the optimum level 257 if (buffer_fullness_ratio < 1.0) 258 { 259 // The lower of max_bits / 4 or cpi->av_per_frame_bandwidth / 4. 260 int min_max_bits = ((cpi->av_per_frame_bandwidth >> 2) < (max_bits >> 2)) ? cpi->av_per_frame_bandwidth >> 2 : max_bits >> 2; 261 262 max_bits = (int)(max_bits * buffer_fullness_ratio); 263 264 if (max_bits < min_max_bits) 265 max_bits = min_max_bits; // Lowest value we will set ... which should allow the buffer to refil. 266 } 267 } 268 // VBR 269 else 270 { 271 // For VBR base this on the bits and frames left plus the two_pass_vbrmax_section rate passed in by the user 272 max_bits = (int)(((double)cpi->bits_left / (cpi->total_stats->count - (double)cpi->common.current_video_frame)) * ((double)cpi->oxcf.two_pass_vbrmax_section / 100.0)); 273 } 274 275 // Trap case where we are out of bits 276 if (max_bits < 0) 277 max_bits = 0; 278 279 return max_bits; 280 } 281 282 283 static void output_stats(const VP8_COMP *cpi, 284 struct vpx_codec_pkt_list *pktlist, 285 FIRSTPASS_STATS *stats) 286 { 287 struct vpx_codec_cx_pkt pkt; 288 pkt.kind = VPX_CODEC_STATS_PKT; 289 pkt.data.twopass_stats.buf = stats; 290 pkt.data.twopass_stats.sz = sizeof(FIRSTPASS_STATS); 291 vpx_codec_pkt_list_add(pktlist, &pkt); 292 293 // TEMP debug code 294 #if OUTPUT_FPF 295 296 { 297 FILE *fpfile; 298 fpfile = fopen("firstpass.stt", "a"); 299 300 fprintf(fpfile, "%12.0f %12.0f %12.0f %12.4f %12.4f %12.4f %12.4f" 301 " %12.4f %12.4f %12.4f %12.4f %12.4f %12.4f %12.4f %12.4f" 302 " %12.0f %12.4f\n", 303 stats->frame, 304 stats->intra_error, 305 stats->coded_error, 306 stats->ssim_weighted_pred_err, 307 stats->pcnt_inter, 308 stats->pcnt_motion, 309 stats->pcnt_second_ref, 310 stats->pcnt_neutral, 311 stats->MVr, 312 stats->mvr_abs, 313 stats->MVc, 314 stats->mvc_abs, 315 stats->MVrv, 316 stats->MVcv, 317 stats->mv_in_out_count, 318 stats->count, 319 stats->duration); 320 fclose(fpfile); 321 } 322 #endif 323 } 324 325 static int input_stats(VP8_COMP *cpi, FIRSTPASS_STATS *fps) 326 { 327 if (cpi->stats_in >= cpi->stats_in_end) 328 return EOF; 329 330 *fps = *cpi->stats_in; 331 cpi->stats_in = (void*)((char *)cpi->stats_in + sizeof(FIRSTPASS_STATS)); 332 return 1; 333 } 334 335 static void zero_stats(FIRSTPASS_STATS *section) 336 { 337 section->frame = 0.0; 338 section->intra_error = 0.0; 339 section->coded_error = 0.0; 340 section->ssim_weighted_pred_err = 0.0; 341 section->pcnt_inter = 0.0; 342 section->pcnt_motion = 0.0; 343 section->pcnt_second_ref = 0.0; 344 section->pcnt_neutral = 0.0; 345 section->MVr = 0.0; 346 section->mvr_abs = 0.0; 347 section->MVc = 0.0; 348 section->mvc_abs = 0.0; 349 section->MVrv = 0.0; 350 section->MVcv = 0.0; 351 section->mv_in_out_count = 0.0; 352 section->count = 0.0; 353 section->duration = 1.0; 354 } 355 static void accumulate_stats(FIRSTPASS_STATS *section, FIRSTPASS_STATS *frame) 356 { 357 section->frame += frame->frame; 358 section->intra_error += frame->intra_error; 359 section->coded_error += frame->coded_error; 360 section->ssim_weighted_pred_err += frame->ssim_weighted_pred_err; 361 section->pcnt_inter += frame->pcnt_inter; 362 section->pcnt_motion += frame->pcnt_motion; 363 section->pcnt_second_ref += frame->pcnt_second_ref; 364 section->pcnt_neutral += frame->pcnt_neutral; 365 section->MVr += frame->MVr; 366 section->mvr_abs += frame->mvr_abs; 367 section->MVc += frame->MVc; 368 section->mvc_abs += frame->mvc_abs; 369 section->MVrv += frame->MVrv; 370 section->MVcv += frame->MVcv; 371 section->mv_in_out_count += frame->mv_in_out_count; 372 section->count += frame->count; 373 section->duration += frame->duration; 374 } 375 static void avg_stats(FIRSTPASS_STATS *section) 376 { 377 if (section->count < 1.0) 378 return; 379 380 section->intra_error /= section->count; 381 section->coded_error /= section->count; 382 section->ssim_weighted_pred_err /= section->count; 383 section->pcnt_inter /= section->count; 384 section->pcnt_second_ref /= section->count; 385 section->pcnt_neutral /= section->count; 386 section->pcnt_motion /= section->count; 387 section->MVr /= section->count; 388 section->mvr_abs /= section->count; 389 section->MVc /= section->count; 390 section->mvc_abs /= section->count; 391 section->MVrv /= section->count; 392 section->MVcv /= section->count; 393 section->mv_in_out_count /= section->count; 394 section->duration /= section->count; 395 } 396 397 void vp8_init_first_pass(VP8_COMP *cpi) 398 { 399 zero_stats(cpi->total_stats); 400 } 401 402 void vp8_end_first_pass(VP8_COMP *cpi) 403 { 404 output_stats(cpi, cpi->output_pkt_list, cpi->total_stats); 405 } 406 407 static void zz_motion_search( VP8_COMP *cpi, MACROBLOCK * x, YV12_BUFFER_CONFIG * recon_buffer, int * best_motion_err, int recon_yoffset ) 408 { 409 MACROBLOCKD * const xd = & x->e_mbd; 410 BLOCK *b = &x->block[0]; 411 BLOCKD *d = &x->e_mbd.block[0]; 412 413 unsigned char *src_ptr = (*(b->base_src) + b->src); 414 int src_stride = b->src_stride; 415 unsigned char *ref_ptr; 416 int ref_stride=d->pre_stride; 417 418 // Set up pointers for this macro block recon buffer 419 xd->pre.y_buffer = recon_buffer->y_buffer + recon_yoffset; 420 421 ref_ptr = (unsigned char *)(*(d->base_pre) + d->pre ); 422 423 VARIANCE_INVOKE(IF_RTCD(&cpi->rtcd.variance), mse16x16) ( src_ptr, src_stride, ref_ptr, ref_stride, (unsigned int *)(best_motion_err)); 424 } 425 426 static void first_pass_motion_search(VP8_COMP *cpi, MACROBLOCK *x, MV *ref_mv, MV *best_mv, YV12_BUFFER_CONFIG *recon_buffer, int *best_motion_err, int recon_yoffset ) 427 { 428 MACROBLOCKD *const xd = & x->e_mbd; 429 BLOCK *b = &x->block[0]; 430 BLOCKD *d = &x->e_mbd.block[0]; 431 int num00; 432 433 MV tmp_mv = {0, 0}; 434 435 int tmp_err; 436 int step_param = 3; //3; // Dont search over full range for first pass 437 int further_steps = (MAX_MVSEARCH_STEPS - 1) - step_param; //3; 438 int n; 439 vp8_variance_fn_ptr_t v_fn_ptr = cpi->fn_ptr[BLOCK_16X16]; 440 int new_mv_mode_penalty = 256; 441 442 // override the default variance function to use MSE 443 v_fn_ptr.vf = VARIANCE_INVOKE(IF_RTCD(&cpi->rtcd.variance), mse16x16); 444 445 // Set up pointers for this macro block recon buffer 446 xd->pre.y_buffer = recon_buffer->y_buffer + recon_yoffset; 447 448 // Initial step/diamond search centred on best mv 449 tmp_err = cpi->diamond_search_sad(x, b, d, ref_mv, &tmp_mv, step_param, x->errorperbit, &num00, &v_fn_ptr, x->mvsadcost, x->mvcost, ref_mv); 450 if ( tmp_err < INT_MAX-new_mv_mode_penalty ) 451 tmp_err += new_mv_mode_penalty; 452 453 if (tmp_err < *best_motion_err) 454 { 455 *best_motion_err = tmp_err; 456 best_mv->row = tmp_mv.row; 457 best_mv->col = tmp_mv.col; 458 } 459 460 // Further step/diamond searches as necessary 461 n = num00; 462 num00 = 0; 463 464 while (n < further_steps) 465 { 466 n++; 467 468 if (num00) 469 num00--; 470 else 471 { 472 tmp_err = cpi->diamond_search_sad(x, b, d, ref_mv, &tmp_mv, step_param + n, x->errorperbit, &num00, &v_fn_ptr, x->mvsadcost, x->mvcost, ref_mv); 473 if ( tmp_err < INT_MAX-new_mv_mode_penalty ) 474 tmp_err += new_mv_mode_penalty; 475 476 if (tmp_err < *best_motion_err) 477 { 478 *best_motion_err = tmp_err; 479 best_mv->row = tmp_mv.row; 480 best_mv->col = tmp_mv.col; 481 } 482 } 483 } 484 } 485 486 void vp8_first_pass(VP8_COMP *cpi) 487 { 488 int mb_row, mb_col; 489 MACROBLOCK *const x = & cpi->mb; 490 VP8_COMMON *const cm = & cpi->common; 491 MACROBLOCKD *const xd = & x->e_mbd; 492 493 int col_blocks = 4 * cm->mb_cols; 494 int recon_yoffset, recon_uvoffset; 495 YV12_BUFFER_CONFIG *lst_yv12 = &cm->yv12_fb[cm->lst_fb_idx]; 496 YV12_BUFFER_CONFIG *new_yv12 = &cm->yv12_fb[cm->new_fb_idx]; 497 YV12_BUFFER_CONFIG *gld_yv12 = &cm->yv12_fb[cm->gld_fb_idx]; 498 int recon_y_stride = lst_yv12->y_stride; 499 int recon_uv_stride = lst_yv12->uv_stride; 500 long long intra_error = 0; 501 long long coded_error = 0; 502 503 int sum_mvr = 0, sum_mvc = 0; 504 int sum_mvr_abs = 0, sum_mvc_abs = 0; 505 int sum_mvrs = 0, sum_mvcs = 0; 506 int mvcount = 0; 507 int intercount = 0; 508 int second_ref_count = 0; 509 int intrapenalty = 256; 510 int neutral_count = 0; 511 512 int sum_in_vectors = 0; 513 514 MV zero_ref_mv = {0, 0}; 515 516 vp8_clear_system_state(); //__asm emms; 517 518 x->src = * cpi->Source; 519 xd->pre = *lst_yv12; 520 xd->dst = *new_yv12; 521 522 x->partition_info = x->pi; 523 524 xd->mode_info_context = cm->mi; 525 526 vp8_build_block_offsets(x); 527 528 vp8_setup_block_dptrs(&x->e_mbd); 529 530 vp8_setup_block_ptrs(x); 531 532 // set up frame new frame for intra coded blocks 533 vp8_setup_intra_recon(new_yv12); 534 vp8cx_frame_init_quantizer(cpi); 535 536 // Initialise the MV cost table to the defaults 537 //if( cm->current_video_frame == 0) 538 //if ( 0 ) 539 { 540 int flag[2] = {1, 1}; 541 vp8_initialize_rd_consts(cpi, vp8_dc_quant(cm->base_qindex, cm->y1dc_delta_q)); 542 vpx_memcpy(cm->fc.mvc, vp8_default_mv_context, sizeof(vp8_default_mv_context)); 543 vp8_build_component_cost_table(cpi->mb.mvcost, cpi->mb.mvsadcost, (const MV_CONTEXT *) cm->fc.mvc, flag); 544 } 545 546 // for each macroblock row in image 547 for (mb_row = 0; mb_row < cm->mb_rows; mb_row++) 548 { 549 int_mv best_ref_mv; 550 551 best_ref_mv.as_int = 0; 552 553 // reset above block coeffs 554 xd->up_available = (mb_row != 0); 555 recon_yoffset = (mb_row * recon_y_stride * 16); 556 recon_uvoffset = (mb_row * recon_uv_stride * 8); 557 558 // Set up limit values for motion vectors to prevent them extending outside the UMV borders 559 x->mv_row_min = -((mb_row * 16) + (VP8BORDERINPIXELS - 16)); 560 x->mv_row_max = ((cm->mb_rows - 1 - mb_row) * 16) + (VP8BORDERINPIXELS - 16); 561 562 563 // for each macroblock col in image 564 for (mb_col = 0; mb_col < cm->mb_cols; mb_col++) 565 { 566 int this_error; 567 int zz_to_best_ratio; 568 int gf_motion_error = INT_MAX; 569 int use_dc_pred = (mb_col || mb_row) && (!mb_col || !mb_row); 570 571 xd->dst.y_buffer = new_yv12->y_buffer + recon_yoffset; 572 xd->dst.u_buffer = new_yv12->u_buffer + recon_uvoffset; 573 xd->dst.v_buffer = new_yv12->v_buffer + recon_uvoffset; 574 xd->left_available = (mb_col != 0); 575 576 // do intra 16x16 prediction 577 this_error = encode_intra(cpi, x, use_dc_pred); 578 579 // "intrapenalty" below deals with situations where the intra and inter error scores are very low (eg a plain black frame) 580 // We do not have special cases in first pass for 0,0 and nearest etc so all inter modes carry an overhead cost estimate fot the mv. 581 // When the error score is very low this causes us to pick all or lots of INTRA modes and throw lots of key frames. 582 // This penalty adds a cost matching that of a 0,0 mv to the intra case. 583 this_error += intrapenalty; 584 585 // Cumulative intra error total 586 intra_error += (long long)this_error; 587 588 // Set up limit values for motion vectors to prevent them extending outside the UMV borders 589 x->mv_col_min = -((mb_col * 16) + (VP8BORDERINPIXELS - 16)); 590 x->mv_col_max = ((cm->mb_cols - 1 - mb_col) * 16) + (VP8BORDERINPIXELS - 16); 591 592 // Other than for the first frame do a motion search 593 if (cm->current_video_frame > 0) 594 { 595 BLOCK *b = &x->block[0]; 596 BLOCKD *d = &x->e_mbd.block[0]; 597 MV tmp_mv = {0, 0}; 598 int tmp_err; 599 int motion_error = INT_MAX; 600 601 // Simple 0,0 motion with no mv overhead 602 zz_motion_search( cpi, x, lst_yv12, &motion_error, recon_yoffset ); 603 d->bmi.mv.as_mv.row = 0; 604 d->bmi.mv.as_mv.col = 0; 605 606 // Test last reference frame using the previous best mv as the 607 // starting point (best reference) for the search 608 first_pass_motion_search(cpi, x, &best_ref_mv.as_mv, 609 &d->bmi.mv.as_mv, lst_yv12, 610 &motion_error, recon_yoffset); 611 612 // If the current best reference mv is not centred on 0,0 then do a 0,0 based search as well 613 if (best_ref_mv.as_int) 614 { 615 tmp_err = INT_MAX; 616 first_pass_motion_search(cpi, x, &zero_ref_mv, &tmp_mv, 617 lst_yv12, &tmp_err, recon_yoffset); 618 619 if ( tmp_err < motion_error ) 620 { 621 motion_error = tmp_err; 622 d->bmi.mv.as_mv.row = tmp_mv.row; 623 d->bmi.mv.as_mv.col = tmp_mv.col; 624 } 625 } 626 627 // Experimental search in a second reference frame ((0,0) based only) 628 if (cm->current_video_frame > 1) 629 { 630 first_pass_motion_search(cpi, x, &zero_ref_mv, &tmp_mv, gld_yv12, &gf_motion_error, recon_yoffset); 631 632 if ((gf_motion_error < motion_error) && (gf_motion_error < this_error)) 633 { 634 second_ref_count++; 635 //motion_error = gf_motion_error; 636 //d->bmi.mv.as_mv.row = tmp_mv.row; 637 //d->bmi.mv.as_mv.col = tmp_mv.col; 638 } 639 /*else 640 { 641 xd->pre.y_buffer = cm->last_frame.y_buffer + recon_yoffset; 642 xd->pre.u_buffer = cm->last_frame.u_buffer + recon_uvoffset; 643 xd->pre.v_buffer = cm->last_frame.v_buffer + recon_uvoffset; 644 }*/ 645 646 647 // Reset to last frame as reference buffer 648 xd->pre.y_buffer = lst_yv12->y_buffer + recon_yoffset; 649 xd->pre.u_buffer = lst_yv12->u_buffer + recon_uvoffset; 650 xd->pre.v_buffer = lst_yv12->v_buffer + recon_uvoffset; 651 } 652 653 /* Intra assumed best */ 654 best_ref_mv.as_int = 0; 655 656 if (motion_error <= this_error) 657 { 658 // Keep a count of cases where the inter and intra were 659 // very close and very low. This helps with scene cut 660 // detection for example in cropped clips with black bars 661 // at the sides or top and bottom. 662 if( (((this_error-intrapenalty) * 9) <= 663 (motion_error*10)) && 664 (this_error < (2*intrapenalty)) ) 665 { 666 neutral_count++; 667 } 668 669 d->bmi.mv.as_mv.row <<= 3; 670 d->bmi.mv.as_mv.col <<= 3; 671 this_error = motion_error; 672 vp8_set_mbmode_and_mvs(x, NEWMV, &d->bmi.mv.as_mv); 673 vp8_encode_inter16x16y(IF_RTCD(&cpi->rtcd), x); 674 sum_mvr += d->bmi.mv.as_mv.row; 675 sum_mvr_abs += abs(d->bmi.mv.as_mv.row); 676 sum_mvc += d->bmi.mv.as_mv.col; 677 sum_mvc_abs += abs(d->bmi.mv.as_mv.col); 678 sum_mvrs += d->bmi.mv.as_mv.row * d->bmi.mv.as_mv.row; 679 sum_mvcs += d->bmi.mv.as_mv.col * d->bmi.mv.as_mv.col; 680 intercount++; 681 682 best_ref_mv.as_int = d->bmi.mv.as_int; 683 684 // Was the vector non-zero 685 if (d->bmi.mv.as_int) 686 { 687 mvcount++; 688 689 // Does the Row vector point inwards or outwards 690 if (mb_row < cm->mb_rows / 2) 691 { 692 if (d->bmi.mv.as_mv.row > 0) 693 sum_in_vectors--; 694 else if (d->bmi.mv.as_mv.row < 0) 695 sum_in_vectors++; 696 } 697 else if (mb_row > cm->mb_rows / 2) 698 { 699 if (d->bmi.mv.as_mv.row > 0) 700 sum_in_vectors++; 701 else if (d->bmi.mv.as_mv.row < 0) 702 sum_in_vectors--; 703 } 704 705 // Does the Row vector point inwards or outwards 706 if (mb_col < cm->mb_cols / 2) 707 { 708 if (d->bmi.mv.as_mv.col > 0) 709 sum_in_vectors--; 710 else if (d->bmi.mv.as_mv.col < 0) 711 sum_in_vectors++; 712 } 713 else if (mb_col > cm->mb_cols / 2) 714 { 715 if (d->bmi.mv.as_mv.col > 0) 716 sum_in_vectors++; 717 else if (d->bmi.mv.as_mv.col < 0) 718 sum_in_vectors--; 719 } 720 } 721 } 722 } 723 724 coded_error += (long long)this_error; 725 726 // adjust to the next column of macroblocks 727 x->src.y_buffer += 16; 728 x->src.u_buffer += 8; 729 x->src.v_buffer += 8; 730 731 recon_yoffset += 16; 732 recon_uvoffset += 8; 733 } 734 735 // adjust to the next row of mbs 736 x->src.y_buffer += 16 * x->src.y_stride - 16 * cm->mb_cols; 737 x->src.u_buffer += 8 * x->src.uv_stride - 8 * cm->mb_cols; 738 x->src.v_buffer += 8 * x->src.uv_stride - 8 * cm->mb_cols; 739 740 //extend the recon for intra prediction 741 vp8_extend_mb_row(new_yv12, xd->dst.y_buffer + 16, xd->dst.u_buffer + 8, xd->dst.v_buffer + 8); 742 vp8_clear_system_state(); //__asm emms; 743 } 744 745 vp8_clear_system_state(); //__asm emms; 746 { 747 double weight = 0.0; 748 749 FIRSTPASS_STATS fps; 750 751 fps.frame = cm->current_video_frame ; 752 fps.intra_error = intra_error >> 8; 753 fps.coded_error = coded_error >> 8; 754 weight = simple_weight(cpi->Source); 755 756 757 if (weight < 0.1) 758 weight = 0.1; 759 760 fps.ssim_weighted_pred_err = fps.coded_error * weight; 761 762 fps.pcnt_inter = 0.0; 763 fps.pcnt_motion = 0.0; 764 fps.MVr = 0.0; 765 fps.mvr_abs = 0.0; 766 fps.MVc = 0.0; 767 fps.mvc_abs = 0.0; 768 fps.MVrv = 0.0; 769 fps.MVcv = 0.0; 770 fps.mv_in_out_count = 0.0; 771 fps.count = 1.0; 772 773 fps.pcnt_inter = 1.0 * (double)intercount / cm->MBs; 774 fps.pcnt_second_ref = 1.0 * (double)second_ref_count / cm->MBs; 775 fps.pcnt_neutral = 1.0 * (double)neutral_count / cm->MBs; 776 777 if (mvcount > 0) 778 { 779 fps.MVr = (double)sum_mvr / (double)mvcount; 780 fps.mvr_abs = (double)sum_mvr_abs / (double)mvcount; 781 fps.MVc = (double)sum_mvc / (double)mvcount; 782 fps.mvc_abs = (double)sum_mvc_abs / (double)mvcount; 783 fps.MVrv = ((double)sum_mvrs - (fps.MVr * fps.MVr / (double)mvcount)) / (double)mvcount; 784 fps.MVcv = ((double)sum_mvcs - (fps.MVc * fps.MVc / (double)mvcount)) / (double)mvcount; 785 fps.mv_in_out_count = (double)sum_in_vectors / (double)(mvcount * 2); 786 787 fps.pcnt_motion = 1.0 * (double)mvcount / cpi->common.MBs; 788 } 789 790 // TODO: handle the case when duration is set to 0, or something less 791 // than the full time between subsequent cpi->source_time_stamp s . 792 fps.duration = cpi->source_end_time_stamp - cpi->source_time_stamp; 793 794 // don't want to do output stats with a stack variable! 795 memcpy(cpi->this_frame_stats, 796 &fps, 797 sizeof(FIRSTPASS_STATS)); 798 output_stats(cpi, cpi->output_pkt_list, cpi->this_frame_stats); 799 accumulate_stats(cpi->total_stats, &fps); 800 } 801 802 // Copy the previous Last Frame into the GF buffer if specific conditions for doing so are met 803 if ((cm->current_video_frame > 0) && 804 (cpi->this_frame_stats->pcnt_inter > 0.20) && 805 ((cpi->this_frame_stats->intra_error / cpi->this_frame_stats->coded_error) > 2.0)) 806 { 807 vp8_yv12_copy_frame_ptr(lst_yv12, gld_yv12); 808 } 809 810 // swap frame pointers so last frame refers to the frame we just compressed 811 vp8_swap_yv12_buffer(lst_yv12, new_yv12); 812 vp8_yv12_extend_frame_borders(lst_yv12); 813 814 // Special case for the first frame. Copy into the GF buffer as a second reference. 815 if (cm->current_video_frame == 0) 816 { 817 vp8_yv12_copy_frame_ptr(lst_yv12, gld_yv12); 818 } 819 820 821 // use this to see what the first pass reconstruction looks like 822 if (0) 823 { 824 char filename[512]; 825 FILE *recon_file; 826 sprintf(filename, "enc%04d.yuv", (int) cm->current_video_frame); 827 828 if (cm->current_video_frame == 0) 829 recon_file = fopen(filename, "wb"); 830 else 831 recon_file = fopen(filename, "ab"); 832 833 if(fwrite(lst_yv12->buffer_alloc, lst_yv12->frame_size, 1, recon_file)); 834 fclose(recon_file); 835 } 836 837 cm->current_video_frame++; 838 839 } 840 extern const int vp8_bits_per_mb[2][QINDEX_RANGE]; 841 842 #define BASE_ERRPERMB 150 843 static int estimate_max_q(VP8_COMP *cpi, double section_err, int section_target_bandwitdh) 844 { 845 int Q; 846 int num_mbs = cpi->common.MBs; 847 int target_norm_bits_per_mb; 848 849 double err_per_mb = section_err / num_mbs; 850 double correction_factor; 851 double corr_high; 852 double speed_correction = 1.0; 853 double rolling_ratio; 854 855 double pow_highq = 0.90; 856 double pow_lowq = 0.40; 857 858 if (section_target_bandwitdh <= 0) 859 return cpi->maxq_max_limit; // Highest value allowed 860 861 target_norm_bits_per_mb = (section_target_bandwitdh < (1 << 20)) ? (512 * section_target_bandwitdh) / num_mbs : 512 * (section_target_bandwitdh / num_mbs); 862 863 // Calculate a corrective factor based on a rolling ratio of bits spent vs target bits 864 if ((cpi->rolling_target_bits > 0.0) && (cpi->active_worst_quality < cpi->worst_quality)) 865 { 866 //double adjustment_rate = 0.985 + (0.00005 * cpi->active_worst_quality); 867 double adjustment_rate = 0.99; 868 869 rolling_ratio = (double)cpi->rolling_actual_bits / (double)cpi->rolling_target_bits; 870 871 //if ( cpi->est_max_qcorrection_factor > rolling_ratio ) 872 if (rolling_ratio < 0.95) 873 //cpi->est_max_qcorrection_factor *= adjustment_rate; 874 cpi->est_max_qcorrection_factor -= 0.005; 875 //else if ( cpi->est_max_qcorrection_factor < rolling_ratio ) 876 else if (rolling_ratio > 1.05) 877 cpi->est_max_qcorrection_factor += 0.005; 878 879 //cpi->est_max_qcorrection_factor /= adjustment_rate; 880 881 cpi->est_max_qcorrection_factor = (cpi->est_max_qcorrection_factor < 0.1) ? 0.1 : (cpi->est_max_qcorrection_factor > 10.0) ? 10.0 : cpi->est_max_qcorrection_factor; 882 } 883 884 // Corrections for higher compression speed settings (reduced compression expected) 885 if ((cpi->compressor_speed == 3) || (cpi->compressor_speed == 1)) 886 { 887 if (cpi->oxcf.cpu_used <= 5) 888 speed_correction = 1.04 + (cpi->oxcf.cpu_used * 0.04); 889 else 890 speed_correction = 1.25; 891 } 892 893 // Correction factor used for Q values >= 20 894 corr_high = pow(err_per_mb / BASE_ERRPERMB, pow_highq); 895 corr_high = (corr_high < 0.05) 896 ? 0.05 : (corr_high > 5.0) ? 5.0 : corr_high; 897 898 // Try and pick a max Q that will be high enough to encode the 899 // content at the given rate. 900 for (Q = cpi->maxq_min_limit; Q < cpi->maxq_max_limit; Q++) 901 { 902 int bits_per_mb_at_this_q; 903 904 if (Q < 50) 905 { 906 correction_factor = pow(err_per_mb / BASE_ERRPERMB, (pow_lowq + Q * 0.01)); 907 correction_factor = (correction_factor < 0.05) ? 0.05 : (correction_factor > 5.0) ? 5.0 : correction_factor; 908 } 909 else 910 correction_factor = corr_high; 911 912 bits_per_mb_at_this_q = (int)(.5 + correction_factor * speed_correction * cpi->est_max_qcorrection_factor * cpi->section_max_qfactor * (double)vp8_bits_per_mb[INTER_FRAME][Q] / 1.0); 913 //bits_per_mb_at_this_q = (int)(.5 + correction_factor * speed_correction * cpi->est_max_qcorrection_factor * (double)vp8_bits_per_mb[INTER_FRAME][Q] / 1.0); 914 915 if (bits_per_mb_at_this_q <= target_norm_bits_per_mb) 916 break; 917 } 918 919 // Restriction on active max q for constrained quality mode. 920 if ( (cpi->oxcf.end_usage == USAGE_CONSTRAINED_QUALITY) && 921 (Q < cpi->cq_target_quality) ) 922 //(Q < cpi->oxcf.cq_level;) ) 923 { 924 Q = cpi->cq_target_quality; 925 //Q = cpi->oxcf.cq_level; 926 } 927 928 // Adjust maxq_min_limit and maxq_max_limit limits based on 929 // averaga q observed in clip for non kf/gf.arf frames 930 // Give average a chance to settle though. 931 if ( (cpi->ni_frames > 932 ((unsigned int)cpi->total_stats->count >> 8)) && 933 (cpi->ni_frames > 150) ) 934 { 935 cpi->maxq_max_limit = ((cpi->ni_av_qi + 32) < cpi->worst_quality) 936 ? (cpi->ni_av_qi + 32) : cpi->worst_quality; 937 cpi->maxq_min_limit = ((cpi->ni_av_qi - 32) > cpi->best_quality) 938 ? (cpi->ni_av_qi - 32) : cpi->best_quality; 939 } 940 941 return Q; 942 } 943 static int estimate_q(VP8_COMP *cpi, double section_err, int section_target_bandwitdh) 944 { 945 int Q; 946 int num_mbs = cpi->common.MBs; 947 int target_norm_bits_per_mb; 948 949 double err_per_mb = section_err / num_mbs; 950 double correction_factor; 951 double corr_high; 952 double speed_correction = 1.0; 953 double pow_highq = 0.90; 954 double pow_lowq = 0.40; 955 956 target_norm_bits_per_mb = (section_target_bandwitdh < (1 << 20)) ? (512 * section_target_bandwitdh) / num_mbs : 512 * (section_target_bandwitdh / num_mbs); 957 958 // Corrections for higher compression speed settings (reduced compression expected) 959 if ((cpi->compressor_speed == 3) || (cpi->compressor_speed == 1)) 960 { 961 if (cpi->oxcf.cpu_used <= 5) 962 speed_correction = 1.04 + (cpi->oxcf.cpu_used * 0.04); 963 else 964 speed_correction = 1.25; 965 } 966 967 // Correction factor used for Q values >= 20 968 corr_high = pow(err_per_mb / BASE_ERRPERMB, pow_highq); 969 corr_high = (corr_high < 0.05) ? 0.05 : (corr_high > 5.0) ? 5.0 : corr_high; 970 971 // Try and pick a Q that can encode the content at the given rate. 972 for (Q = 0; Q < MAXQ; Q++) 973 { 974 int bits_per_mb_at_this_q; 975 976 if (Q < 50) 977 { 978 correction_factor = pow(err_per_mb / BASE_ERRPERMB, (pow_lowq + Q * 0.01)); 979 correction_factor = (correction_factor < 0.05) ? 0.05 : (correction_factor > 5.0) ? 5.0 : correction_factor; 980 } 981 else 982 correction_factor = corr_high; 983 984 bits_per_mb_at_this_q = (int)(.5 + correction_factor * speed_correction * cpi->est_max_qcorrection_factor * (double)vp8_bits_per_mb[INTER_FRAME][Q] / 1.0); 985 986 if (bits_per_mb_at_this_q <= target_norm_bits_per_mb) 987 break; 988 } 989 990 return Q; 991 } 992 993 // Estimate a worst case Q for a KF group 994 static int estimate_kf_group_q(VP8_COMP *cpi, double section_err, int section_target_bandwitdh, double group_iiratio) 995 { 996 int Q; 997 int num_mbs = cpi->common.MBs; 998 int target_norm_bits_per_mb = (512 * section_target_bandwitdh) / num_mbs; 999 int bits_per_mb_at_this_q; 1000 1001 double err_per_mb = section_err / num_mbs; 1002 double err_correction_factor; 1003 double corr_high; 1004 double speed_correction = 1.0; 1005 double current_spend_ratio = 1.0; 1006 1007 double pow_highq = (POW1 < 0.6) ? POW1 + 0.3 : 0.90; 1008 double pow_lowq = (POW1 < 0.7) ? POW1 + 0.1 : 0.80; 1009 1010 double iiratio_correction_factor = 1.0; 1011 1012 double combined_correction_factor; 1013 1014 // Trap special case where the target is <= 0 1015 if (target_norm_bits_per_mb <= 0) 1016 return MAXQ * 2; 1017 1018 // Calculate a corrective factor based on a rolling ratio of bits spent vs target bits 1019 // This is clamped to the range 0.1 to 10.0 1020 if (cpi->long_rolling_target_bits <= 0) 1021 current_spend_ratio = 10.0; 1022 else 1023 { 1024 current_spend_ratio = (double)cpi->long_rolling_actual_bits / (double)cpi->long_rolling_target_bits; 1025 current_spend_ratio = (current_spend_ratio > 10.0) ? 10.0 : (current_spend_ratio < 0.1) ? 0.1 : current_spend_ratio; 1026 } 1027 1028 // Calculate a correction factor based on the quality of prediction in the sequence as indicated by intra_inter error score ratio (IIRatio) 1029 // The idea here is to favour subsampling in the hardest sections vs the easyest. 1030 iiratio_correction_factor = 1.0 - ((group_iiratio - 6.0) * 0.1); 1031 1032 if (iiratio_correction_factor < 0.5) 1033 iiratio_correction_factor = 0.5; 1034 1035 // Corrections for higher compression speed settings (reduced compression expected) 1036 if ((cpi->compressor_speed == 3) || (cpi->compressor_speed == 1)) 1037 { 1038 if (cpi->oxcf.cpu_used <= 5) 1039 speed_correction = 1.04 + (cpi->oxcf.cpu_used * 0.04); 1040 else 1041 speed_correction = 1.25; 1042 } 1043 1044 // Combine the various factors calculated above 1045 combined_correction_factor = speed_correction * iiratio_correction_factor * current_spend_ratio; 1046 1047 // Correction factor used for Q values >= 20 1048 corr_high = pow(err_per_mb / BASE_ERRPERMB, pow_highq); 1049 corr_high = (corr_high < 0.05) ? 0.05 : (corr_high > 5.0) ? 5.0 : corr_high; 1050 1051 // Try and pick a Q that should be high enough to encode the content at the given rate. 1052 for (Q = 0; Q < MAXQ; Q++) 1053 { 1054 // Q values < 20 treated as a special case 1055 if (Q < 20) 1056 { 1057 err_correction_factor = pow(err_per_mb / BASE_ERRPERMB, (pow_lowq + Q * 0.01)); 1058 err_correction_factor = (err_correction_factor < 0.05) ? 0.05 : (err_correction_factor > 5.0) ? 5.0 : err_correction_factor; 1059 } 1060 else 1061 err_correction_factor = corr_high; 1062 1063 bits_per_mb_at_this_q = (int)(.5 + err_correction_factor * combined_correction_factor * (double)vp8_bits_per_mb[INTER_FRAME][Q]); 1064 1065 if (bits_per_mb_at_this_q <= target_norm_bits_per_mb) 1066 break; 1067 } 1068 1069 // If we could not hit the target even at Max Q then estimate what Q would have bee required 1070 while ((bits_per_mb_at_this_q > target_norm_bits_per_mb) && (Q < (MAXQ * 2))) 1071 { 1072 1073 bits_per_mb_at_this_q = (int)(0.96 * bits_per_mb_at_this_q); 1074 Q++; 1075 } 1076 1077 if (0) 1078 { 1079 FILE *f = fopen("estkf_q.stt", "a"); 1080 fprintf(f, "%8d %8d %8d %8.2f %8.3f %8.2f %8.3f %8.3f %8.3f %8d\n", cpi->common.current_video_frame, bits_per_mb_at_this_q, 1081 target_norm_bits_per_mb, err_per_mb, err_correction_factor, 1082 current_spend_ratio, group_iiratio, iiratio_correction_factor, 1083 (double)cpi->buffer_level / (double)cpi->oxcf.optimal_buffer_level, Q); 1084 fclose(f); 1085 } 1086 1087 return Q; 1088 } 1089 1090 // For cq mode estimate a cq level that matches the observed 1091 // complexity and data rate. 1092 static int estimate_cq(VP8_COMP *cpi, double section_err, int section_target_bandwitdh) 1093 { 1094 int Q; 1095 int num_mbs = cpi->common.MBs; 1096 int target_norm_bits_per_mb; 1097 1098 double err_per_mb = section_err / num_mbs; 1099 double correction_factor; 1100 double corr_high; 1101 double speed_correction = 1.0; 1102 double pow_highq = 0.90; 1103 double pow_lowq = 0.40; 1104 double clip_iiratio; 1105 double clip_iifactor; 1106 1107 target_norm_bits_per_mb = (section_target_bandwitdh < (1 << 20)) 1108 ? (512 * section_target_bandwitdh) / num_mbs 1109 : 512 * (section_target_bandwitdh / num_mbs); 1110 1111 // Corrections for higher compression speed settings 1112 // (reduced compression expected) 1113 if ((cpi->compressor_speed == 3) || (cpi->compressor_speed == 1)) 1114 { 1115 if (cpi->oxcf.cpu_used <= 5) 1116 speed_correction = 1.04 + (cpi->oxcf.cpu_used * 0.04); 1117 else 1118 speed_correction = 1.25; 1119 } 1120 // II ratio correction factor for clip as a whole 1121 clip_iiratio = cpi->total_stats->intra_error / 1122 DOUBLE_DIVIDE_CHECK(cpi->total_stats->coded_error); 1123 clip_iifactor = 1.0 - ((clip_iiratio - 10.0) * 0.025); 1124 if (clip_iifactor < 0.80) 1125 clip_iifactor = 0.80; 1126 1127 // Correction factor used for Q values >= 20 1128 corr_high = pow(err_per_mb / BASE_ERRPERMB, pow_highq); 1129 corr_high = (corr_high < 0.05) ? 0.05 : (corr_high > 5.0) ? 5.0 : corr_high; 1130 1131 // Try and pick a Q that can encode the content at the given rate. 1132 for (Q = 0; Q < MAXQ; Q++) 1133 { 1134 int bits_per_mb_at_this_q; 1135 1136 if (Q < 50) 1137 { 1138 correction_factor = 1139 pow( err_per_mb / BASE_ERRPERMB, (pow_lowq + Q * 0.01)); 1140 1141 correction_factor = (correction_factor < 0.05) ? 0.05 1142 : (correction_factor > 5.0) ? 5.0 1143 : correction_factor; 1144 } 1145 else 1146 correction_factor = corr_high; 1147 1148 bits_per_mb_at_this_q = 1149 (int)( .5 + correction_factor * 1150 speed_correction * 1151 clip_iifactor * 1152 (double)vp8_bits_per_mb[INTER_FRAME][Q] / 1.0); 1153 1154 if (bits_per_mb_at_this_q <= target_norm_bits_per_mb) 1155 break; 1156 } 1157 1158 return cq_level[Q]; 1159 } 1160 1161 extern void vp8_new_frame_rate(VP8_COMP *cpi, double framerate); 1162 1163 void vp8_init_second_pass(VP8_COMP *cpi) 1164 { 1165 FIRSTPASS_STATS this_frame; 1166 FIRSTPASS_STATS *start_pos; 1167 1168 double two_pass_min_rate = (double)(cpi->oxcf.target_bandwidth * cpi->oxcf.two_pass_vbrmin_section / 100); 1169 1170 zero_stats(cpi->total_stats); 1171 1172 if (!cpi->stats_in_end) 1173 return; 1174 1175 *cpi->total_stats = *cpi->stats_in_end; 1176 1177 cpi->total_error_left = cpi->total_stats->ssim_weighted_pred_err; 1178 cpi->total_intra_error_left = cpi->total_stats->intra_error; 1179 cpi->total_coded_error_left = cpi->total_stats->coded_error; 1180 cpi->start_tot_err_left = cpi->total_error_left; 1181 1182 //cpi->bits_left = (long long)(cpi->total_stats->count * cpi->oxcf.target_bandwidth / DOUBLE_DIVIDE_CHECK((double)cpi->oxcf.frame_rate)); 1183 //cpi->bits_left -= (long long)(cpi->total_stats->count * two_pass_min_rate / DOUBLE_DIVIDE_CHECK((double)cpi->oxcf.frame_rate)); 1184 1185 // each frame can have a different duration, as the frame rate in the source 1186 // isn't guaranteed to be constant. The frame rate prior to the first frame 1187 // encoded in the second pass is a guess. However the sum duration is not. 1188 // Its calculated based on the actual durations of all frames from the first 1189 // pass. 1190 vp8_new_frame_rate(cpi, 10000000.0 * cpi->total_stats->count / cpi->total_stats->duration); 1191 1192 cpi->output_frame_rate = cpi->oxcf.frame_rate; 1193 cpi->bits_left = (long long)(cpi->total_stats->duration * cpi->oxcf.target_bandwidth / 10000000.0) ; 1194 cpi->bits_left -= (long long)(cpi->total_stats->duration * two_pass_min_rate / 10000000.0); 1195 cpi->clip_bits_total = cpi->bits_left; 1196 1197 // Calculate a minimum intra value to be used in determining the IIratio 1198 // scores used in the second pass. We have this minimum to make sure 1199 // that clips that are static but "low complexity" in the intra domain 1200 // are still boosted appropriately for KF/GF/ARF 1201 cpi->kf_intra_err_min = KF_MB_INTRA_MIN * cpi->common.MBs; 1202 cpi->gf_intra_err_min = GF_MB_INTRA_MIN * cpi->common.MBs; 1203 1204 avg_stats(cpi->total_stats); 1205 1206 // Scan the first pass file and calculate an average Intra / Inter error score ratio for the sequence 1207 { 1208 double sum_iiratio = 0.0; 1209 double IIRatio; 1210 1211 start_pos = cpi->stats_in; // Note starting "file" position 1212 1213 while (input_stats(cpi, &this_frame) != EOF) 1214 { 1215 IIRatio = this_frame.intra_error / DOUBLE_DIVIDE_CHECK(this_frame.coded_error); 1216 IIRatio = (IIRatio < 1.0) ? 1.0 : (IIRatio > 20.0) ? 20.0 : IIRatio; 1217 sum_iiratio += IIRatio; 1218 } 1219 1220 cpi->avg_iiratio = sum_iiratio / DOUBLE_DIVIDE_CHECK((double)cpi->total_stats->count); 1221 1222 // Reset file position 1223 reset_fpf_position(cpi, start_pos); 1224 } 1225 1226 // Scan the first pass file and calculate a modified total error based upon the bias/power function 1227 // used to allocate bits 1228 { 1229 start_pos = cpi->stats_in; // Note starting "file" position 1230 1231 cpi->modified_error_total = 0.0; 1232 cpi->modified_error_used = 0.0; 1233 1234 while (input_stats(cpi, &this_frame) != EOF) 1235 { 1236 cpi->modified_error_total += calculate_modified_err(cpi, &this_frame); 1237 } 1238 cpi->modified_error_left = cpi->modified_error_total; 1239 1240 reset_fpf_position(cpi, start_pos); // Reset file position 1241 1242 } 1243 1244 // Calculate the clip target modified bits per error 1245 // The observed bpe starts as the same number. 1246 cpi->clip_bpe = cpi->bits_left / 1247 DOUBLE_DIVIDE_CHECK(cpi->modified_error_total); 1248 cpi->observed_bpe = cpi->clip_bpe; 1249 } 1250 1251 void vp8_end_second_pass(VP8_COMP *cpi) 1252 { 1253 } 1254 1255 // This function gives and estimate of how badly we believe 1256 // the prediction quality is decaying from frame to frame. 1257 static double get_prediction_decay_rate(VP8_COMP *cpi, FIRSTPASS_STATS *next_frame) 1258 { 1259 double prediction_decay_rate; 1260 double motion_decay; 1261 double motion_pct = next_frame->pcnt_motion; 1262 1263 1264 // Initial basis is the % mbs inter coded 1265 prediction_decay_rate = next_frame->pcnt_inter; 1266 1267 // High % motion -> somewhat higher decay rate 1268 motion_decay = (1.0 - (motion_pct / 20.0)); 1269 if (motion_decay < prediction_decay_rate) 1270 prediction_decay_rate = motion_decay; 1271 1272 // Adjustment to decay rate based on speed of motion 1273 { 1274 double this_mv_rabs; 1275 double this_mv_cabs; 1276 double distance_factor; 1277 1278 this_mv_rabs = fabs(next_frame->mvr_abs * motion_pct); 1279 this_mv_cabs = fabs(next_frame->mvc_abs * motion_pct); 1280 1281 distance_factor = sqrt((this_mv_rabs * this_mv_rabs) + 1282 (this_mv_cabs * this_mv_cabs)) / 250.0; 1283 distance_factor = ((distance_factor > 1.0) 1284 ? 0.0 : (1.0 - distance_factor)); 1285 if (distance_factor < prediction_decay_rate) 1286 prediction_decay_rate = distance_factor; 1287 } 1288 1289 return prediction_decay_rate; 1290 } 1291 1292 // Function to test for a condition where a complex transition is followed 1293 // by a static section. For example in slide shows where there is a fade 1294 // between slides. This is to help with more optimal kf and gf positioning. 1295 static int detect_transition_to_still( 1296 VP8_COMP *cpi, 1297 int frame_interval, 1298 int still_interval, 1299 double loop_decay_rate, 1300 double decay_accumulator ) 1301 { 1302 BOOL trans_to_still = FALSE; 1303 1304 // Break clause to detect very still sections after motion 1305 // For example a static image after a fade or other transition 1306 // instead of a clean scene cut. 1307 if ( (frame_interval > MIN_GF_INTERVAL) && 1308 (loop_decay_rate >= 0.999) && 1309 (decay_accumulator < 0.9) ) 1310 { 1311 int j; 1312 FIRSTPASS_STATS * position = cpi->stats_in; 1313 FIRSTPASS_STATS tmp_next_frame; 1314 double decay_rate; 1315 1316 // Look ahead a few frames to see if static condition 1317 // persists... 1318 for ( j = 0; j < still_interval; j++ ) 1319 { 1320 if (EOF == input_stats(cpi, &tmp_next_frame)) 1321 break; 1322 1323 decay_rate = get_prediction_decay_rate(cpi, &tmp_next_frame); 1324 if ( decay_rate < 0.999 ) 1325 break; 1326 } 1327 // Reset file position 1328 reset_fpf_position(cpi, position); 1329 1330 // Only if it does do we signal a transition to still 1331 if ( j == still_interval ) 1332 trans_to_still = TRUE; 1333 } 1334 1335 return trans_to_still; 1336 } 1337 1338 // Analyse and define a gf/arf group . 1339 static void define_gf_group(VP8_COMP *cpi, FIRSTPASS_STATS *this_frame) 1340 { 1341 FIRSTPASS_STATS next_frame; 1342 FIRSTPASS_STATS *start_pos; 1343 int i; 1344 int y_width = cpi->common.yv12_fb[cpi->common.lst_fb_idx].y_width; 1345 int y_height = cpi->common.yv12_fb[cpi->common.lst_fb_idx].y_height; 1346 int image_size = y_width * y_height; 1347 double boost_score = 0.0; 1348 double old_boost_score = 0.0; 1349 double gf_group_err = 0.0; 1350 double gf_first_frame_err = 0.0; 1351 double mod_frame_err = 0.0; 1352 1353 double mv_accumulator_rabs = 0.0; 1354 double mv_accumulator_cabs = 0.0; 1355 double mv_ratio_accumulator = 0.0; 1356 double decay_accumulator = 1.0; 1357 1358 double boost_factor = IIFACTOR; 1359 double loop_decay_rate = 1.00; // Starting decay rate 1360 1361 double this_frame_mv_in_out = 0.0; 1362 double mv_in_out_accumulator = 0.0; 1363 double abs_mv_in_out_accumulator = 0.0; 1364 double mod_err_per_mb_accumulator = 0.0; 1365 1366 int max_bits = frame_max_bits(cpi); // Max for a single frame 1367 1368 unsigned int allow_alt_ref = 1369 cpi->oxcf.play_alternate && cpi->oxcf.lag_in_frames; 1370 1371 cpi->gf_group_bits = 0; 1372 cpi->gf_decay_rate = 0; 1373 1374 vp8_clear_system_state(); //__asm emms; 1375 1376 start_pos = cpi->stats_in; 1377 1378 vpx_memset(&next_frame, 0, sizeof(next_frame)); // assure clean 1379 1380 // Preload the stats for the next frame. 1381 mod_frame_err = calculate_modified_err(cpi, this_frame); 1382 1383 // Note the error of the frame at the start of the group (this will be 1384 // the GF frame error if we code a normal gf 1385 gf_first_frame_err = mod_frame_err; 1386 1387 // Special treatment if the current frame is a key frame (which is also 1388 // a gf). If it is then its error score (and hence bit allocation) need 1389 // to be subtracted out from the calculation for the GF group 1390 if (cpi->common.frame_type == KEY_FRAME) 1391 gf_group_err -= gf_first_frame_err; 1392 1393 // Scan forward to try and work out how many frames the next gf group 1394 // should contain and what level of boost is appropriate for the GF 1395 // or ARF that will be coded with the group 1396 i = 0; 1397 1398 while (((i < cpi->static_scene_max_gf_interval) || 1399 ((cpi->frames_to_key - i) < MIN_GF_INTERVAL)) && 1400 (i < cpi->frames_to_key)) 1401 { 1402 double r; 1403 double this_frame_mvr_ratio; 1404 double this_frame_mvc_ratio; 1405 double motion_decay; 1406 //double motion_pct = next_frame.pcnt_motion; 1407 double motion_pct; 1408 1409 i++; // Increment the loop counter 1410 1411 // Accumulate error score of frames in this gf group 1412 mod_frame_err = calculate_modified_err(cpi, this_frame); 1413 1414 gf_group_err += mod_frame_err; 1415 1416 mod_err_per_mb_accumulator += 1417 mod_frame_err / DOUBLE_DIVIDE_CHECK((double)cpi->common.MBs); 1418 1419 if (EOF == input_stats(cpi, &next_frame)) 1420 break; 1421 1422 // Accumulate motion stats. 1423 motion_pct = next_frame.pcnt_motion; 1424 mv_accumulator_rabs += fabs(next_frame.mvr_abs * motion_pct); 1425 mv_accumulator_cabs += fabs(next_frame.mvc_abs * motion_pct); 1426 1427 //Accumulate Motion In/Out of frame stats 1428 this_frame_mv_in_out = 1429 next_frame.mv_in_out_count * motion_pct; 1430 mv_in_out_accumulator += 1431 next_frame.mv_in_out_count * motion_pct; 1432 abs_mv_in_out_accumulator += 1433 fabs(next_frame.mv_in_out_count * motion_pct); 1434 1435 // If there is a significant amount of motion 1436 if (motion_pct > 0.05) 1437 { 1438 this_frame_mvr_ratio = fabs(next_frame.mvr_abs) / 1439 DOUBLE_DIVIDE_CHECK(fabs(next_frame.MVr)); 1440 1441 this_frame_mvc_ratio = fabs(next_frame.mvc_abs) / 1442 DOUBLE_DIVIDE_CHECK(fabs(next_frame.MVc)); 1443 1444 mv_ratio_accumulator += 1445 (this_frame_mvr_ratio < next_frame.mvr_abs) 1446 ? (this_frame_mvr_ratio * motion_pct) 1447 : next_frame.mvr_abs * motion_pct; 1448 1449 mv_ratio_accumulator += 1450 (this_frame_mvc_ratio < next_frame.mvc_abs) 1451 ? (this_frame_mvc_ratio * motion_pct) 1452 : next_frame.mvc_abs * motion_pct; 1453 } 1454 else 1455 { 1456 mv_ratio_accumulator += 0.0; 1457 this_frame_mvr_ratio = 1.0; 1458 this_frame_mvc_ratio = 1.0; 1459 } 1460 1461 // Underlying boost factor is based on inter intra error ratio 1462 r = ( boost_factor * 1463 ( next_frame.intra_error / 1464 DOUBLE_DIVIDE_CHECK(next_frame.coded_error))); 1465 1466 if (next_frame.intra_error > cpi->gf_intra_err_min) 1467 r = (IIKFACTOR2 * next_frame.intra_error / 1468 DOUBLE_DIVIDE_CHECK(next_frame.coded_error)); 1469 else 1470 r = (IIKFACTOR2 * cpi->gf_intra_err_min / 1471 DOUBLE_DIVIDE_CHECK(next_frame.coded_error)); 1472 1473 // Increase boost for frames where new data coming into frame 1474 // (eg zoom out). Slightly reduce boost if there is a net balance 1475 // of motion out of the frame (zoom in). 1476 // The range for this_frame_mv_in_out is -1.0 to +1.0 1477 if (this_frame_mv_in_out > 0.0) 1478 r += r * (this_frame_mv_in_out * 2.0); 1479 // In extreme case boost is halved 1480 else 1481 r += r * (this_frame_mv_in_out / 2.0); 1482 1483 if (r > GF_RMAX) 1484 r = GF_RMAX; 1485 1486 loop_decay_rate = get_prediction_decay_rate(cpi, &next_frame); 1487 1488 // Cumulative effect of decay 1489 decay_accumulator = decay_accumulator * loop_decay_rate; 1490 decay_accumulator = decay_accumulator < 0.1 ? 0.1 : decay_accumulator; 1491 1492 boost_score += (decay_accumulator * r); 1493 1494 // Break clause to detect very still sections after motion 1495 // For example a staic image after a fade or other transition. 1496 if ( detect_transition_to_still( cpi, i, 5, 1497 loop_decay_rate, decay_accumulator ) ) 1498 { 1499 allow_alt_ref = FALSE; 1500 boost_score = old_boost_score; 1501 break; 1502 } 1503 1504 // Break out conditions. 1505 if ( /* i>4 || */ 1506 // Break at cpi->max_gf_interval unless almost totally static 1507 (i >= cpi->max_gf_interval && (decay_accumulator < 0.995)) || 1508 ( 1509 // Dont break out with a very short interval 1510 (i > MIN_GF_INTERVAL) && 1511 // Dont break out very close to a key frame 1512 ((cpi->frames_to_key - i) >= MIN_GF_INTERVAL) && 1513 ((boost_score > 20.0) || (next_frame.pcnt_inter < 0.75)) && 1514 ((mv_ratio_accumulator > 100.0) || 1515 (abs_mv_in_out_accumulator > 3.0) || 1516 (mv_in_out_accumulator < -2.0) || 1517 ((boost_score - old_boost_score) < 2.0)) 1518 ) ) 1519 { 1520 boost_score = old_boost_score; 1521 break; 1522 } 1523 1524 vpx_memcpy(this_frame, &next_frame, sizeof(*this_frame)); 1525 1526 old_boost_score = boost_score; 1527 } 1528 1529 cpi->gf_decay_rate = 1530 (i > 0) ? (int)(100.0 * (1.0 - decay_accumulator)) / i : 0; 1531 1532 // When using CBR apply additional buffer related upper limits 1533 if (cpi->oxcf.end_usage == USAGE_STREAM_FROM_SERVER) 1534 { 1535 double max_boost; 1536 1537 // For cbr apply buffer related limits 1538 if (cpi->drop_frames_allowed) 1539 { 1540 int df_buffer_level = cpi->oxcf.drop_frames_water_mark * 1541 (cpi->oxcf.optimal_buffer_level / 100); 1542 1543 if (cpi->buffer_level > df_buffer_level) 1544 max_boost = ((double)((cpi->buffer_level - df_buffer_level) * 2 / 3) * 16.0) / DOUBLE_DIVIDE_CHECK((double)cpi->av_per_frame_bandwidth); 1545 else 1546 max_boost = 0.0; 1547 } 1548 else if (cpi->buffer_level > 0) 1549 { 1550 max_boost = ((double)(cpi->buffer_level * 2 / 3) * 16.0) / DOUBLE_DIVIDE_CHECK((double)cpi->av_per_frame_bandwidth); 1551 } 1552 else 1553 { 1554 max_boost = 0.0; 1555 } 1556 1557 if (boost_score > max_boost) 1558 boost_score = max_boost; 1559 } 1560 1561 cpi->gfu_boost = (int)(boost_score * 100.0) >> 4; 1562 1563 // Should we use the alternate refernce frame 1564 if (allow_alt_ref && 1565 (i >= MIN_GF_INTERVAL) && 1566 // dont use ARF very near next kf 1567 (i <= (cpi->frames_to_key - MIN_GF_INTERVAL)) && 1568 (((next_frame.pcnt_inter > 0.75) && 1569 ((mv_in_out_accumulator / (double)i > -0.2) || (mv_in_out_accumulator > -2.0)) && 1570 //(cpi->gfu_boost>150) && 1571 (cpi->gfu_boost > 100) && 1572 //(cpi->gfu_boost>AF_THRESH2) && 1573 //((cpi->gfu_boost/i)>AF_THRESH) && 1574 //(decay_accumulator > 0.5) && 1575 (cpi->gf_decay_rate <= (ARF_DECAY_THRESH + (cpi->gfu_boost / 200))) 1576 ) 1577 ) 1578 ) 1579 { 1580 int Boost; 1581 int allocation_chunks; 1582 int Q = (cpi->oxcf.fixed_q < 0) ? cpi->last_q[INTER_FRAME] : cpi->oxcf.fixed_q; 1583 int tmp_q; 1584 int arf_frame_bits = 0; 1585 int group_bits; 1586 1587 // Estimate the bits to be allocated to the group as a whole 1588 if ((cpi->kf_group_bits > 0) && (cpi->kf_group_error_left > 0)) 1589 group_bits = (int)((double)cpi->kf_group_bits * (gf_group_err / (double)cpi->kf_group_error_left)); 1590 else 1591 group_bits = 0; 1592 1593 // Boost for arf frame 1594 Boost = (cpi->gfu_boost * 3 * GFQ_ADJUSTMENT) / (2 * 100); 1595 Boost += (i * 50); 1596 allocation_chunks = (i * 100) + Boost; 1597 1598 // Normalize Altboost and allocations chunck down to prevent overflow 1599 while (Boost > 1000) 1600 { 1601 Boost /= 2; 1602 allocation_chunks /= 2; 1603 } 1604 1605 // Calculate the number of bits to be spent on the arf based on the boost number 1606 arf_frame_bits = (int)((double)Boost * (group_bits / (double)allocation_chunks)); 1607 1608 // Estimate if there are enough bits available to make worthwhile use of an arf. 1609 tmp_q = estimate_q(cpi, mod_frame_err, (int)arf_frame_bits); 1610 1611 // Only use an arf if it is likely we will be able to code it at a lower Q than the surrounding frames. 1612 if (tmp_q < cpi->worst_quality) 1613 { 1614 int half_gf_int; 1615 int frames_after_arf; 1616 int frames_bwd = cpi->oxcf.arnr_max_frames - 1; 1617 int frames_fwd = cpi->oxcf.arnr_max_frames - 1; 1618 1619 cpi->source_alt_ref_pending = TRUE; 1620 1621 // For alt ref frames the error score for the end frame of the group (the alt ref frame) should not contribute to the group total and hence 1622 // the number of bit allocated to the group. Rather it forms part of the next group (it is the GF at the start of the next group) 1623 gf_group_err -= mod_frame_err; 1624 1625 // Set the interval till the next gf or arf. For ARFs this is the number of frames to be coded before the future frame that is coded as an ARF. 1626 // The future frame itself is part of the next group 1627 cpi->baseline_gf_interval = i - 1; 1628 1629 // Define the arnr filter width for this group of frames: 1630 // We only filter frames that lie within a distance of half 1631 // the GF interval from the ARF frame. We also have to trap 1632 // cases where the filter extends beyond the end of clip. 1633 // Note: this_frame->frame has been updated in the loop 1634 // so it now points at the ARF frame. 1635 half_gf_int = cpi->baseline_gf_interval >> 1; 1636 frames_after_arf = cpi->total_stats->count - this_frame->frame - 1; 1637 1638 switch (cpi->oxcf.arnr_type) 1639 { 1640 case 1: // Backward filter 1641 frames_fwd = 0; 1642 if (frames_bwd > half_gf_int) 1643 frames_bwd = half_gf_int; 1644 break; 1645 1646 case 2: // Forward filter 1647 if (frames_fwd > half_gf_int) 1648 frames_fwd = half_gf_int; 1649 if (frames_fwd > frames_after_arf) 1650 frames_fwd = frames_after_arf; 1651 frames_bwd = 0; 1652 break; 1653 1654 case 3: // Centered filter 1655 default: 1656 frames_fwd >>= 1; 1657 if (frames_fwd > frames_after_arf) 1658 frames_fwd = frames_after_arf; 1659 if (frames_fwd > half_gf_int) 1660 frames_fwd = half_gf_int; 1661 1662 frames_bwd = frames_fwd; 1663 1664 // For even length filter there is one more frame backward 1665 // than forward: e.g. len=6 ==> bbbAff, len=7 ==> bbbAfff. 1666 if (frames_bwd < half_gf_int) 1667 frames_bwd += (cpi->oxcf.arnr_max_frames+1) & 0x1; 1668 break; 1669 } 1670 1671 cpi->active_arnr_frames = frames_bwd + 1 + frames_fwd; 1672 } 1673 else 1674 { 1675 cpi->source_alt_ref_pending = FALSE; 1676 cpi->baseline_gf_interval = i; 1677 } 1678 } 1679 else 1680 { 1681 cpi->source_alt_ref_pending = FALSE; 1682 cpi->baseline_gf_interval = i; 1683 } 1684 1685 // Conventional GF 1686 if (!cpi->source_alt_ref_pending) 1687 { 1688 // Dont allow conventional gf too near the next kf 1689 if ((cpi->frames_to_key - cpi->baseline_gf_interval) < MIN_GF_INTERVAL) 1690 { 1691 while (cpi->baseline_gf_interval < cpi->frames_to_key) 1692 { 1693 if (EOF == input_stats(cpi, this_frame)) 1694 break; 1695 1696 cpi->baseline_gf_interval++; 1697 1698 if (cpi->baseline_gf_interval < cpi->frames_to_key) 1699 gf_group_err += calculate_modified_err(cpi, this_frame); 1700 } 1701 } 1702 } 1703 1704 // Now decide how many bits should be allocated to the GF group as a proportion of those remaining in the kf group. 1705 // The final key frame group in the clip is treated as a special case where cpi->kf_group_bits is tied to cpi->bits_left. 1706 // This is also important for short clips where there may only be one key frame. 1707 if (cpi->frames_to_key >= (int)(cpi->total_stats->count - cpi->common.current_video_frame)) 1708 { 1709 cpi->kf_group_bits = (cpi->bits_left > 0) ? cpi->bits_left : 0; 1710 } 1711 1712 // Calculate the bits to be allocated to the group as a whole 1713 if ((cpi->kf_group_bits > 0) && (cpi->kf_group_error_left > 0)) 1714 cpi->gf_group_bits = (int)((double)cpi->kf_group_bits * (gf_group_err / (double)cpi->kf_group_error_left)); 1715 else 1716 cpi->gf_group_bits = 0; 1717 1718 cpi->gf_group_bits = (cpi->gf_group_bits < 0) ? 0 : (cpi->gf_group_bits > cpi->kf_group_bits) ? cpi->kf_group_bits : cpi->gf_group_bits; 1719 1720 // Clip cpi->gf_group_bits based on user supplied data rate variability limit (cpi->oxcf.two_pass_vbrmax_section) 1721 if (cpi->gf_group_bits > max_bits * cpi->baseline_gf_interval) 1722 cpi->gf_group_bits = max_bits * cpi->baseline_gf_interval; 1723 1724 // Reset the file position 1725 reset_fpf_position(cpi, start_pos); 1726 1727 // Update the record of error used so far (only done once per gf group) 1728 cpi->modified_error_used += gf_group_err; 1729 1730 // Assign bits to the arf or gf. 1731 { 1732 int Boost; 1733 int frames_in_section; 1734 int allocation_chunks; 1735 int Q = (cpi->oxcf.fixed_q < 0) ? cpi->last_q[INTER_FRAME] : cpi->oxcf.fixed_q; 1736 1737 // For ARF frames 1738 if (cpi->source_alt_ref_pending) 1739 { 1740 Boost = (cpi->gfu_boost * 3 * GFQ_ADJUSTMENT) / (2 * 100); 1741 //Boost += (cpi->baseline_gf_interval * 25); 1742 Boost += (cpi->baseline_gf_interval * 50); 1743 1744 // Set max and minimum boost and hence minimum allocation 1745 if (Boost > ((cpi->baseline_gf_interval + 1) * 200)) 1746 Boost = ((cpi->baseline_gf_interval + 1) * 200); 1747 else if (Boost < 125) 1748 Boost = 125; 1749 1750 frames_in_section = cpi->baseline_gf_interval + 1; 1751 allocation_chunks = (frames_in_section * 100) + Boost; 1752 } 1753 // Else for standard golden frames 1754 else 1755 { 1756 // boost based on inter / intra ratio of subsequent frames 1757 Boost = (cpi->gfu_boost * GFQ_ADJUSTMENT) / 100; 1758 1759 // Set max and minimum boost and hence minimum allocation 1760 if (Boost > (cpi->baseline_gf_interval * 150)) 1761 Boost = (cpi->baseline_gf_interval * 150); 1762 else if (Boost < 125) 1763 Boost = 125; 1764 1765 frames_in_section = cpi->baseline_gf_interval; 1766 allocation_chunks = (frames_in_section * 100) + (Boost - 100); 1767 } 1768 1769 // Normalize Altboost and allocations chunck down to prevent overflow 1770 while (Boost > 1000) 1771 { 1772 Boost /= 2; 1773 allocation_chunks /= 2; 1774 } 1775 1776 // Calculate the number of bits to be spent on the gf or arf based on the boost number 1777 cpi->gf_bits = (int)((double)Boost * (cpi->gf_group_bits / (double)allocation_chunks)); 1778 1779 // If the frame that is to be boosted is simpler than the average for 1780 // the gf/arf group then use an alternative calculation 1781 // based on the error score of the frame itself 1782 if (mod_frame_err < gf_group_err / (double)cpi->baseline_gf_interval) 1783 { 1784 double alt_gf_grp_bits; 1785 int alt_gf_bits; 1786 1787 alt_gf_grp_bits = 1788 (double)cpi->kf_group_bits * 1789 (mod_frame_err * (double)cpi->baseline_gf_interval) / 1790 DOUBLE_DIVIDE_CHECK((double)cpi->kf_group_error_left); 1791 1792 alt_gf_bits = (int)((double)Boost * (alt_gf_grp_bits / 1793 (double)allocation_chunks)); 1794 1795 if (cpi->gf_bits > alt_gf_bits) 1796 { 1797 cpi->gf_bits = alt_gf_bits; 1798 } 1799 } 1800 // Else if it is harder than other frames in the group make sure it at 1801 // least receives an allocation in keeping with its relative error 1802 // score, otherwise it may be worse off than an "un-boosted" frame 1803 else 1804 { 1805 int alt_gf_bits = 1806 (int)((double)cpi->kf_group_bits * 1807 mod_frame_err / 1808 DOUBLE_DIVIDE_CHECK((double)cpi->kf_group_error_left)); 1809 1810 if (alt_gf_bits > cpi->gf_bits) 1811 { 1812 cpi->gf_bits = alt_gf_bits; 1813 } 1814 } 1815 1816 // Apply an additional limit for CBR 1817 if (cpi->oxcf.end_usage == USAGE_STREAM_FROM_SERVER) 1818 { 1819 if (cpi->gf_bits > (cpi->buffer_level >> 1)) 1820 cpi->gf_bits = cpi->buffer_level >> 1; 1821 } 1822 1823 // Dont allow a negative value for gf_bits 1824 if (cpi->gf_bits < 0) 1825 cpi->gf_bits = 0; 1826 1827 // Adjust KF group bits and error remainin 1828 cpi->kf_group_error_left -= gf_group_err; 1829 cpi->kf_group_bits -= cpi->gf_group_bits; 1830 1831 if (cpi->kf_group_bits < 0) 1832 cpi->kf_group_bits = 0; 1833 1834 // Note the error score left in the remaining frames of the group. 1835 // For normal GFs we want to remove the error score for the first frame of the group (except in Key frame case where this has already happened) 1836 if (!cpi->source_alt_ref_pending && cpi->common.frame_type != KEY_FRAME) 1837 cpi->gf_group_error_left = gf_group_err - gf_first_frame_err; 1838 else 1839 cpi->gf_group_error_left = gf_group_err; 1840 1841 cpi->gf_group_bits -= cpi->gf_bits; 1842 1843 if (cpi->gf_group_bits < 0) 1844 cpi->gf_group_bits = 0; 1845 1846 // Set aside some bits for a mid gf sequence boost 1847 if ((cpi->gfu_boost > 150) && (cpi->baseline_gf_interval > 5)) 1848 { 1849 int pct_extra = (cpi->gfu_boost - 100) / 50; 1850 pct_extra = (pct_extra > 10) ? 10 : pct_extra; 1851 1852 cpi->mid_gf_extra_bits = (cpi->gf_group_bits * pct_extra) / 100; 1853 cpi->gf_group_bits -= cpi->mid_gf_extra_bits; 1854 } 1855 else 1856 cpi->mid_gf_extra_bits = 0; 1857 1858 cpi->gf_bits += cpi->min_frame_bandwidth; // Add in minimum for a frame 1859 } 1860 1861 if (!cpi->source_alt_ref_pending && (cpi->common.frame_type != KEY_FRAME)) // Normal GF and not a KF 1862 { 1863 cpi->per_frame_bandwidth = cpi->gf_bits; // Per frame bit target for this frame 1864 } 1865 1866 // Adjustment to estimate_max_q based on a measure of complexity of the section 1867 if (cpi->common.frame_type != KEY_FRAME) 1868 { 1869 FIRSTPASS_STATS sectionstats; 1870 double Ratio; 1871 1872 zero_stats(§ionstats); 1873 reset_fpf_position(cpi, start_pos); 1874 1875 for (i = 0 ; i < cpi->baseline_gf_interval ; i++) 1876 { 1877 input_stats(cpi, &next_frame); 1878 accumulate_stats(§ionstats, &next_frame); 1879 } 1880 1881 avg_stats(§ionstats); 1882 1883 cpi->section_intra_rating = 1884 sectionstats.intra_error / 1885 DOUBLE_DIVIDE_CHECK(sectionstats.coded_error); 1886 1887 Ratio = sectionstats.intra_error / DOUBLE_DIVIDE_CHECK(sectionstats.coded_error); 1888 //if( (Ratio > 11) ) //&& (sectionstats.pcnt_second_ref < .20) ) 1889 //{ 1890 cpi->section_max_qfactor = 1.0 - ((Ratio - 10.0) * 0.025); 1891 1892 if (cpi->section_max_qfactor < 0.80) 1893 cpi->section_max_qfactor = 0.80; 1894 1895 //} 1896 //else 1897 // cpi->section_max_qfactor = 1.0; 1898 1899 reset_fpf_position(cpi, start_pos); 1900 } 1901 } 1902 1903 // Allocate bits to a normal frame that is neither a gf an arf or a key frame. 1904 static void assign_std_frame_bits(VP8_COMP *cpi, FIRSTPASS_STATS *this_frame) 1905 { 1906 int target_frame_size; // gf_group_error_left 1907 1908 double modified_err; 1909 double err_fraction; // What portion of the remaining GF group error is used by this frame 1910 1911 int max_bits = frame_max_bits(cpi); // Max for a single frame 1912 1913 // The final few frames have special treatment 1914 if (cpi->frames_till_gf_update_due >= (int)(cpi->total_stats->count - cpi->common.current_video_frame)) 1915 { 1916 cpi->gf_group_bits = (cpi->bits_left > 0) ? cpi->bits_left : 0;; 1917 } 1918 1919 // Calculate modified prediction error used in bit allocation 1920 modified_err = calculate_modified_err(cpi, this_frame); 1921 1922 if (cpi->gf_group_error_left > 0) 1923 err_fraction = modified_err / cpi->gf_group_error_left; // What portion of the remaining GF group error is used by this frame 1924 else 1925 err_fraction = 0.0; 1926 1927 target_frame_size = (int)((double)cpi->gf_group_bits * err_fraction); // How many of those bits available for allocation should we give it? 1928 1929 // Clip to target size to 0 - max_bits (or cpi->gf_group_bits) at the top end. 1930 if (target_frame_size < 0) 1931 target_frame_size = 0; 1932 else 1933 { 1934 if (target_frame_size > max_bits) 1935 target_frame_size = max_bits; 1936 1937 if (target_frame_size > cpi->gf_group_bits) 1938 target_frame_size = cpi->gf_group_bits; 1939 } 1940 1941 cpi->gf_group_error_left -= modified_err; // Adjust error remaining 1942 cpi->gf_group_bits -= target_frame_size; // Adjust bits remaining 1943 1944 if (cpi->gf_group_bits < 0) 1945 cpi->gf_group_bits = 0; 1946 1947 target_frame_size += cpi->min_frame_bandwidth; // Add in the minimum number of bits that is set aside for every frame. 1948 1949 // Special case for the frame that lies half way between two gfs 1950 if (cpi->common.frames_since_golden == cpi->baseline_gf_interval / 2) 1951 target_frame_size += cpi->mid_gf_extra_bits; 1952 1953 cpi->per_frame_bandwidth = target_frame_size; // Per frame bit target for this frame 1954 } 1955 1956 void vp8_second_pass(VP8_COMP *cpi) 1957 { 1958 int tmp_q; 1959 int frames_left = (int)(cpi->total_stats->count - cpi->common.current_video_frame); 1960 1961 FIRSTPASS_STATS this_frame; 1962 FIRSTPASS_STATS this_frame_copy; 1963 1964 VP8_COMMON *cm = &cpi->common; 1965 1966 double this_frame_error; 1967 double this_frame_intra_error; 1968 double this_frame_coded_error; 1969 1970 FIRSTPASS_STATS *start_pos; 1971 1972 if (!cpi->stats_in) 1973 { 1974 return ; 1975 } 1976 1977 vp8_clear_system_state(); 1978 1979 if (EOF == input_stats(cpi, &this_frame)) 1980 return; 1981 1982 this_frame_error = this_frame.ssim_weighted_pred_err; 1983 this_frame_intra_error = this_frame.intra_error; 1984 this_frame_coded_error = this_frame.coded_error; 1985 1986 // Store information regarding level of motion etc for use mode decisions. 1987 cpi->motion_speed = (int)(fabs(this_frame.MVr) + fabs(this_frame.MVc)); 1988 cpi->motion_var = (int)(fabs(this_frame.MVrv) + fabs(this_frame.MVcv)); 1989 cpi->inter_lvl = (int)(this_frame.pcnt_inter * 100); 1990 cpi->intra_lvl = (int)((1.0 - this_frame.pcnt_inter) * 100); 1991 cpi->motion_lvl = (int)(this_frame.pcnt_motion * 100); 1992 1993 start_pos = cpi->stats_in; 1994 1995 // keyframe and section processing ! 1996 if (cpi->frames_to_key == 0) 1997 { 1998 // Define next KF group and assign bits to it 1999 vpx_memcpy(&this_frame_copy, &this_frame, sizeof(this_frame)); 2000 find_next_key_frame(cpi, &this_frame_copy); 2001 2002 // Special case: Error error_resilient_mode mode does not make much sense for two pass but with its current meaning but this code is designed to stop 2003 // outlandish behaviour if someone does set it when using two pass. It effectively disables GF groups. 2004 // This is temporary code till we decide what should really happen in this case. 2005 if (cpi->oxcf.error_resilient_mode) 2006 { 2007 cpi->gf_group_bits = cpi->kf_group_bits; 2008 cpi->gf_group_error_left = cpi->kf_group_error_left; 2009 cpi->baseline_gf_interval = cpi->frames_to_key; 2010 cpi->frames_till_gf_update_due = cpi->baseline_gf_interval; 2011 cpi->source_alt_ref_pending = FALSE; 2012 } 2013 2014 } 2015 2016 // Is this a GF / ARF (Note that a KF is always also a GF) 2017 if (cpi->frames_till_gf_update_due == 0) 2018 { 2019 // Update monitor of the bits per error observed so far. 2020 // Done once per gf group based on what has gone before 2021 // so do nothing if this is the first frame. 2022 if (cpi->common.current_video_frame > 0) 2023 { 2024 cpi->observed_bpe = 2025 (double)(cpi->clip_bits_total - cpi->bits_left) / 2026 cpi->modified_error_used; 2027 } 2028 2029 // Define next gf group and assign bits to it 2030 vpx_memcpy(&this_frame_copy, &this_frame, sizeof(this_frame)); 2031 define_gf_group(cpi, &this_frame_copy); 2032 2033 // If we are going to code an altref frame at the end of the group and the current frame is not a key frame.... 2034 // If the previous group used an arf this frame has already benefited from that arf boost and it should not be given extra bits 2035 // If the previous group was NOT coded using arf we may want to apply some boost to this GF as well 2036 if (cpi->source_alt_ref_pending && (cpi->common.frame_type != KEY_FRAME)) 2037 { 2038 // Assign a standard frames worth of bits from those allocated to the GF group 2039 vpx_memcpy(&this_frame_copy, &this_frame, sizeof(this_frame)); 2040 assign_std_frame_bits(cpi, &this_frame_copy); 2041 2042 // If appropriate (we are switching into ARF active but it was not previously active) apply a boost for the gf at the start of the group. 2043 //if ( !cpi->source_alt_ref_active && (cpi->gfu_boost > 150) ) 2044 if (FALSE) 2045 { 2046 int extra_bits; 2047 int pct_extra = (cpi->gfu_boost - 100) / 50; 2048 2049 pct_extra = (pct_extra > 20) ? 20 : pct_extra; 2050 2051 extra_bits = (cpi->gf_group_bits * pct_extra) / 100; 2052 cpi->gf_group_bits -= extra_bits; 2053 cpi->per_frame_bandwidth += extra_bits; 2054 } 2055 } 2056 } 2057 2058 // Otherwise this is an ordinary frame 2059 else 2060 { 2061 // Special case: Error error_resilient_mode mode does not make much sense for two pass but with its current meaning but this code is designed to stop 2062 // outlandish behaviour if someone does set it when using two pass. It effectively disables GF groups. 2063 // This is temporary code till we decide what should really happen in this case. 2064 if (cpi->oxcf.error_resilient_mode) 2065 { 2066 cpi->frames_till_gf_update_due = cpi->frames_to_key; 2067 2068 if (cpi->common.frame_type != KEY_FRAME) 2069 { 2070 // Assign bits from those allocated to the GF group 2071 vpx_memcpy(&this_frame_copy, &this_frame, sizeof(this_frame)); 2072 assign_std_frame_bits(cpi, &this_frame_copy); 2073 } 2074 } 2075 else 2076 { 2077 // Assign bits from those allocated to the GF group 2078 vpx_memcpy(&this_frame_copy, &this_frame, sizeof(this_frame)); 2079 assign_std_frame_bits(cpi, &this_frame_copy); 2080 } 2081 } 2082 2083 // Keep a globally available copy of this and the next frame's iiratio. 2084 cpi->this_iiratio = this_frame_intra_error / 2085 DOUBLE_DIVIDE_CHECK(this_frame_coded_error); 2086 { 2087 FIRSTPASS_STATS next_frame; 2088 if ( lookup_next_frame_stats(cpi, &next_frame) != EOF ) 2089 { 2090 cpi->next_iiratio = next_frame.intra_error / 2091 DOUBLE_DIVIDE_CHECK(next_frame.coded_error); 2092 } 2093 } 2094 2095 // Set nominal per second bandwidth for this frame 2096 cpi->target_bandwidth = cpi->per_frame_bandwidth * cpi->output_frame_rate; 2097 if (cpi->target_bandwidth < 0) 2098 cpi->target_bandwidth = 0; 2099 2100 if (cpi->common.current_video_frame == 0) 2101 { 2102 cpi->est_max_qcorrection_factor = 1.0; 2103 2104 // Experimental code to try and set a cq_level in constrained 2105 // quality mode. 2106 if ( cpi->oxcf.end_usage == USAGE_CONSTRAINED_QUALITY ) 2107 { 2108 int est_cq; 2109 2110 est_cq = 2111 estimate_cq( cpi, 2112 (cpi->total_coded_error_left / frames_left), 2113 (int)(cpi->bits_left / frames_left)); 2114 2115 cpi->cq_target_quality = cpi->oxcf.cq_level; 2116 if ( est_cq > cpi->cq_target_quality ) 2117 cpi->cq_target_quality = est_cq; 2118 } 2119 2120 // guess at maxq needed in 2nd pass 2121 cpi->maxq_max_limit = cpi->worst_quality; 2122 cpi->maxq_min_limit = cpi->best_quality; 2123 tmp_q = estimate_max_q( cpi, 2124 (cpi->total_coded_error_left / frames_left), 2125 (int)(cpi->bits_left / frames_left)); 2126 2127 // Limit the maxq value returned subsequently. 2128 // This increases the risk of overspend or underspend if the initial 2129 // estimate for the clip is bad, but helps prevent excessive 2130 // variation in Q, especially near the end of a clip 2131 // where for example a small overspend may cause Q to crash 2132 cpi->maxq_max_limit = ((tmp_q + 32) < cpi->worst_quality) 2133 ? (tmp_q + 32) : cpi->worst_quality; 2134 cpi->maxq_min_limit = ((tmp_q - 32) > cpi->best_quality) 2135 ? (tmp_q - 32) : cpi->best_quality; 2136 2137 cpi->active_worst_quality = tmp_q; 2138 cpi->ni_av_qi = tmp_q; 2139 } 2140 2141 // The last few frames of a clip almost always have to few or too many 2142 // bits and for the sake of over exact rate control we dont want to make 2143 // radical adjustments to the allowed quantizer range just to use up a 2144 // few surplus bits or get beneath the target rate. 2145 else if ( (cpi->common.current_video_frame < 2146 (((unsigned int)cpi->total_stats->count * 255)>>8)) && 2147 ((cpi->common.current_video_frame + cpi->baseline_gf_interval) < 2148 (unsigned int)cpi->total_stats->count) ) 2149 { 2150 if (frames_left < 1) 2151 frames_left = 1; 2152 2153 tmp_q = estimate_max_q(cpi, (cpi->total_coded_error_left / frames_left), (int)(cpi->bits_left / frames_left)); 2154 2155 // Move active_worst_quality but in a damped way 2156 if (tmp_q > cpi->active_worst_quality) 2157 cpi->active_worst_quality ++; 2158 else if (tmp_q < cpi->active_worst_quality) 2159 cpi->active_worst_quality --; 2160 2161 cpi->active_worst_quality = ((cpi->active_worst_quality * 3) + tmp_q + 2) / 4; 2162 } 2163 2164 cpi->frames_to_key --; 2165 cpi->total_error_left -= this_frame_error; 2166 cpi->total_intra_error_left -= this_frame_intra_error; 2167 cpi->total_coded_error_left -= this_frame_coded_error; 2168 } 2169 2170 2171 static BOOL test_candidate_kf(VP8_COMP *cpi, FIRSTPASS_STATS *last_frame, FIRSTPASS_STATS *this_frame, FIRSTPASS_STATS *next_frame) 2172 { 2173 BOOL is_viable_kf = FALSE; 2174 2175 // Does the frame satisfy the primary criteria of a key frame 2176 // If so, then examine how well it predicts subsequent frames 2177 if ((this_frame->pcnt_second_ref < 0.10) && 2178 (next_frame->pcnt_second_ref < 0.10) && 2179 ((this_frame->pcnt_inter < 0.05) || 2180 ( 2181 ((this_frame->pcnt_inter - this_frame->pcnt_neutral) < .25) && 2182 ((this_frame->intra_error / DOUBLE_DIVIDE_CHECK(this_frame->coded_error)) < 2.5) && 2183 ((fabs(last_frame->coded_error - this_frame->coded_error) / DOUBLE_DIVIDE_CHECK(this_frame->coded_error) > .40) || 2184 (fabs(last_frame->intra_error - this_frame->intra_error) / DOUBLE_DIVIDE_CHECK(this_frame->intra_error) > .40) || 2185 ((next_frame->intra_error / DOUBLE_DIVIDE_CHECK(next_frame->coded_error)) > 3.5) 2186 ) 2187 ) 2188 ) 2189 ) 2190 { 2191 int i; 2192 FIRSTPASS_STATS *start_pos; 2193 2194 FIRSTPASS_STATS local_next_frame; 2195 2196 double boost_score = 0.0; 2197 double old_boost_score = 0.0; 2198 double decay_accumulator = 1.0; 2199 double next_iiratio; 2200 2201 vpx_memcpy(&local_next_frame, next_frame, sizeof(*next_frame)); 2202 2203 // Note the starting file position so we can reset to it 2204 start_pos = cpi->stats_in; 2205 2206 // Examine how well the key frame predicts subsequent frames 2207 for (i = 0 ; i < 16; i++) 2208 { 2209 next_iiratio = (IIKFACTOR1 * local_next_frame.intra_error / DOUBLE_DIVIDE_CHECK(local_next_frame.coded_error)) ; 2210 2211 if (next_iiratio > RMAX) 2212 next_iiratio = RMAX; 2213 2214 // Cumulative effect of decay in prediction quality 2215 if (local_next_frame.pcnt_inter > 0.85) 2216 decay_accumulator = decay_accumulator * local_next_frame.pcnt_inter; 2217 else 2218 decay_accumulator = decay_accumulator * ((0.85 + local_next_frame.pcnt_inter) / 2.0); 2219 2220 //decay_accumulator = decay_accumulator * local_next_frame.pcnt_inter; 2221 2222 // Keep a running total 2223 boost_score += (decay_accumulator * next_iiratio); 2224 2225 // Test various breakout clauses 2226 if ((local_next_frame.pcnt_inter < 0.05) || 2227 (next_iiratio < 1.5) || 2228 (((local_next_frame.pcnt_inter - 2229 local_next_frame.pcnt_neutral) < 0.20) && 2230 (next_iiratio < 3.0)) || 2231 ((boost_score - old_boost_score) < 0.5) || 2232 (local_next_frame.intra_error < 200) 2233 ) 2234 { 2235 break; 2236 } 2237 2238 old_boost_score = boost_score; 2239 2240 // Get the next frame details 2241 if (EOF == input_stats(cpi, &local_next_frame)) 2242 break; 2243 } 2244 2245 // If there is tolerable prediction for at least the next 3 frames then break out else discard this pottential key frame and move on 2246 if (boost_score > 5.0 && (i > 3)) 2247 is_viable_kf = TRUE; 2248 else 2249 { 2250 // Reset the file position 2251 reset_fpf_position(cpi, start_pos); 2252 2253 is_viable_kf = FALSE; 2254 } 2255 } 2256 2257 return is_viable_kf; 2258 } 2259 static void find_next_key_frame(VP8_COMP *cpi, FIRSTPASS_STATS *this_frame) 2260 { 2261 int i,j; 2262 FIRSTPASS_STATS last_frame; 2263 FIRSTPASS_STATS first_frame; 2264 FIRSTPASS_STATS next_frame; 2265 FIRSTPASS_STATS *start_position; 2266 2267 double decay_accumulator = 1.0; 2268 double boost_score = 0; 2269 double old_boost_score = 0.0; 2270 double loop_decay_rate; 2271 2272 double kf_mod_err = 0.0; 2273 double kf_group_err = 0.0; 2274 double kf_group_intra_err = 0.0; 2275 double kf_group_coded_err = 0.0; 2276 double two_pass_min_rate = (double)(cpi->oxcf.target_bandwidth * cpi->oxcf.two_pass_vbrmin_section / 100); 2277 double recent_loop_decay[8] = {1.0,1.0,1.0,1.0,1.0,1.0,1.0,1.0}; 2278 2279 vpx_memset(&next_frame, 0, sizeof(next_frame)); // assure clean 2280 2281 vp8_clear_system_state(); //__asm emms; 2282 start_position = cpi->stats_in; 2283 2284 cpi->common.frame_type = KEY_FRAME; 2285 2286 // is this a forced key frame by interval 2287 cpi->this_key_frame_forced = cpi->next_key_frame_forced; 2288 2289 // Clear the alt ref active flag as this can never be active on a key frame 2290 cpi->source_alt_ref_active = FALSE; 2291 2292 // Kf is always a gf so clear frames till next gf counter 2293 cpi->frames_till_gf_update_due = 0; 2294 2295 cpi->frames_to_key = 1; 2296 2297 // Take a copy of the initial frame details 2298 vpx_memcpy(&first_frame, this_frame, sizeof(*this_frame)); 2299 2300 cpi->kf_group_bits = 0; // Total bits avaialable to kf group 2301 cpi->kf_group_error_left = 0; // Group modified error score. 2302 2303 kf_mod_err = calculate_modified_err(cpi, this_frame); 2304 2305 // find the next keyframe 2306 i = 0; 2307 while (cpi->stats_in < cpi->stats_in_end) 2308 { 2309 // Accumulate kf group error 2310 kf_group_err += calculate_modified_err(cpi, this_frame); 2311 2312 // These figures keep intra and coded error counts for all frames including key frames in the group. 2313 // The effect of the key frame itself can be subtracted out using the first_frame data collected above 2314 kf_group_intra_err += this_frame->intra_error; 2315 kf_group_coded_err += this_frame->coded_error; 2316 2317 // load a the next frame's stats 2318 vpx_memcpy(&last_frame, this_frame, sizeof(*this_frame)); 2319 input_stats(cpi, this_frame); 2320 2321 // Provided that we are not at the end of the file... 2322 if (cpi->oxcf.auto_key 2323 && lookup_next_frame_stats(cpi, &next_frame) != EOF) 2324 { 2325 // Normal scene cut check 2326 if (test_candidate_kf(cpi, &last_frame, this_frame, &next_frame)) 2327 break; 2328 2329 // How fast is prediction quality decaying 2330 loop_decay_rate = get_prediction_decay_rate(cpi, &next_frame); 2331 2332 // We want to know something about the recent past... rather than 2333 // as used elsewhere where we are concened with decay in prediction 2334 // quality since the last GF or KF. 2335 recent_loop_decay[i%8] = loop_decay_rate; 2336 decay_accumulator = 1.0; 2337 for (j = 0; j < 8; j++) 2338 { 2339 decay_accumulator = decay_accumulator * recent_loop_decay[j]; 2340 } 2341 2342 // Special check for transition or high motion followed by a 2343 // to a static scene. 2344 if ( detect_transition_to_still( cpi, i, 2345 (cpi->key_frame_frequency-i), 2346 loop_decay_rate, 2347 decay_accumulator ) ) 2348 { 2349 break; 2350 } 2351 2352 2353 // Step on to the next frame 2354 cpi->frames_to_key ++; 2355 2356 // If we don't have a real key frame within the next two 2357 // forcekeyframeevery intervals then break out of the loop. 2358 if (cpi->frames_to_key >= 2 *(int)cpi->key_frame_frequency) 2359 break; 2360 } else 2361 cpi->frames_to_key ++; 2362 2363 i++; 2364 } 2365 2366 // If there is a max kf interval set by the user we must obey it. 2367 // We already breakout of the loop above at 2x max. 2368 // This code centers the extra kf if the actual natural 2369 // interval is between 1x and 2x 2370 if (cpi->oxcf.auto_key 2371 && cpi->frames_to_key > (int)cpi->key_frame_frequency ) 2372 { 2373 FIRSTPASS_STATS *current_pos = cpi->stats_in; 2374 FIRSTPASS_STATS tmp_frame; 2375 2376 cpi->frames_to_key /= 2; 2377 2378 // Copy first frame details 2379 vpx_memcpy(&tmp_frame, &first_frame, sizeof(first_frame)); 2380 2381 // Reset to the start of the group 2382 reset_fpf_position(cpi, start_position); 2383 2384 kf_group_err = 0; 2385 kf_group_intra_err = 0; 2386 kf_group_coded_err = 0; 2387 2388 // Rescan to get the correct error data for the forced kf group 2389 for( i = 0; i < cpi->frames_to_key; i++ ) 2390 { 2391 // Accumulate kf group errors 2392 kf_group_err += calculate_modified_err(cpi, &tmp_frame); 2393 kf_group_intra_err += tmp_frame.intra_error; 2394 kf_group_coded_err += tmp_frame.coded_error; 2395 2396 // Load a the next frame's stats 2397 input_stats(cpi, &tmp_frame); 2398 } 2399 2400 // Reset to the start of the group 2401 reset_fpf_position(cpi, current_pos); 2402 2403 cpi->next_key_frame_forced = TRUE; 2404 } 2405 else 2406 cpi->next_key_frame_forced = FALSE; 2407 2408 // Special case for the last frame of the file 2409 if (cpi->stats_in >= cpi->stats_in_end) 2410 { 2411 // Accumulate kf group error 2412 kf_group_err += calculate_modified_err(cpi, this_frame); 2413 2414 // These figures keep intra and coded error counts for all frames including key frames in the group. 2415 // The effect of the key frame itself can be subtracted out using the first_frame data collected above 2416 kf_group_intra_err += this_frame->intra_error; 2417 kf_group_coded_err += this_frame->coded_error; 2418 } 2419 2420 // Calculate the number of bits that should be assigned to the kf group. 2421 if ((cpi->bits_left > 0) && (cpi->modified_error_left > 0.0)) 2422 { 2423 // Max for a single normal frame (not key frame) 2424 int max_bits = frame_max_bits(cpi); 2425 2426 // Maximum bits for the kf group 2427 long long max_grp_bits; 2428 2429 // Default allocation based on bits left and relative 2430 // complexity of the section 2431 cpi->kf_group_bits = (long long)( cpi->bits_left * 2432 ( kf_group_err / 2433 cpi->modified_error_left )); 2434 2435 // Clip based on maximum per frame rate defined by the user. 2436 max_grp_bits = (long long)max_bits * (long long)cpi->frames_to_key; 2437 if (cpi->kf_group_bits > max_grp_bits) 2438 cpi->kf_group_bits = max_grp_bits; 2439 2440 // Additional special case for CBR if buffer is getting full. 2441 if (cpi->oxcf.end_usage == USAGE_STREAM_FROM_SERVER) 2442 { 2443 int opt_buffer_lvl = cpi->oxcf.optimal_buffer_level; 2444 int buffer_lvl = cpi->buffer_level; 2445 2446 // If the buffer is near or above the optimal and this kf group is 2447 // not being allocated much then increase the allocation a bit. 2448 if (buffer_lvl >= opt_buffer_lvl) 2449 { 2450 int high_water_mark = (opt_buffer_lvl + 2451 cpi->oxcf.maximum_buffer_size) >> 1; 2452 2453 long long av_group_bits; 2454 2455 // Av bits per frame * number of frames 2456 av_group_bits = (long long)cpi->av_per_frame_bandwidth * 2457 (long long)cpi->frames_to_key; 2458 2459 // We are at or above the maximum. 2460 if (cpi->buffer_level >= high_water_mark) 2461 { 2462 long long min_group_bits; 2463 2464 min_group_bits = av_group_bits + 2465 (long long)(buffer_lvl - 2466 high_water_mark); 2467 2468 if (cpi->kf_group_bits < min_group_bits) 2469 cpi->kf_group_bits = min_group_bits; 2470 } 2471 // We are above optimal but below the maximum 2472 else if (cpi->kf_group_bits < av_group_bits) 2473 { 2474 long long bits_below_av = av_group_bits - 2475 cpi->kf_group_bits; 2476 2477 cpi->kf_group_bits += 2478 (long long)((double)bits_below_av * 2479 (double)(buffer_lvl - opt_buffer_lvl) / 2480 (double)(high_water_mark - opt_buffer_lvl)); 2481 } 2482 } 2483 } 2484 } 2485 else 2486 cpi->kf_group_bits = 0; 2487 2488 // Reset the first pass file position 2489 reset_fpf_position(cpi, start_position); 2490 2491 // determine how big to make this keyframe based on how well the subsequent frames use inter blocks 2492 decay_accumulator = 1.0; 2493 boost_score = 0.0; 2494 loop_decay_rate = 1.00; // Starting decay rate 2495 2496 for (i = 0 ; i < cpi->frames_to_key ; i++) 2497 { 2498 double r; 2499 double motion_decay; 2500 double motion_pct; 2501 2502 if (EOF == input_stats(cpi, &next_frame)) 2503 break; 2504 2505 if (next_frame.intra_error > cpi->kf_intra_err_min) 2506 r = (IIKFACTOR2 * next_frame.intra_error / 2507 DOUBLE_DIVIDE_CHECK(next_frame.coded_error)); 2508 else 2509 r = (IIKFACTOR2 * cpi->kf_intra_err_min / 2510 DOUBLE_DIVIDE_CHECK(next_frame.coded_error)); 2511 2512 if (r > RMAX) 2513 r = RMAX; 2514 2515 // How fast is prediction quality decaying 2516 loop_decay_rate = get_prediction_decay_rate(cpi, &next_frame); 2517 2518 decay_accumulator = decay_accumulator * loop_decay_rate; 2519 decay_accumulator = decay_accumulator < 0.1 ? 0.1 : decay_accumulator; 2520 2521 boost_score += (decay_accumulator * r); 2522 2523 if ((i > MIN_GF_INTERVAL) && 2524 ((boost_score - old_boost_score) < 1.0)) 2525 { 2526 break; 2527 } 2528 2529 old_boost_score = boost_score; 2530 } 2531 2532 if (1) 2533 { 2534 FIRSTPASS_STATS sectionstats; 2535 double Ratio; 2536 2537 zero_stats(§ionstats); 2538 reset_fpf_position(cpi, start_position); 2539 2540 for (i = 0 ; i < cpi->frames_to_key ; i++) 2541 { 2542 input_stats(cpi, &next_frame); 2543 accumulate_stats(§ionstats, &next_frame); 2544 } 2545 2546 avg_stats(§ionstats); 2547 2548 cpi->section_intra_rating = sectionstats.intra_error / DOUBLE_DIVIDE_CHECK(sectionstats.coded_error); 2549 2550 Ratio = sectionstats.intra_error / DOUBLE_DIVIDE_CHECK(sectionstats.coded_error); 2551 // if( (Ratio > 11) ) //&& (sectionstats.pcnt_second_ref < .20) ) 2552 //{ 2553 cpi->section_max_qfactor = 1.0 - ((Ratio - 10.0) * 0.025); 2554 2555 if (cpi->section_max_qfactor < 0.80) 2556 cpi->section_max_qfactor = 0.80; 2557 2558 //} 2559 //else 2560 // cpi->section_max_qfactor = 1.0; 2561 } 2562 2563 // When using CBR apply additional buffer fullness related upper limits 2564 if (cpi->oxcf.end_usage == USAGE_STREAM_FROM_SERVER) 2565 { 2566 double max_boost; 2567 2568 if (cpi->drop_frames_allowed) 2569 { 2570 int df_buffer_level = cpi->oxcf.drop_frames_water_mark * (cpi->oxcf.optimal_buffer_level / 100); 2571 2572 if (cpi->buffer_level > df_buffer_level) 2573 max_boost = ((double)((cpi->buffer_level - df_buffer_level) * 2 / 3) * 16.0) / DOUBLE_DIVIDE_CHECK((double)cpi->av_per_frame_bandwidth); 2574 else 2575 max_boost = 0.0; 2576 } 2577 else if (cpi->buffer_level > 0) 2578 { 2579 max_boost = ((double)(cpi->buffer_level * 2 / 3) * 16.0) / DOUBLE_DIVIDE_CHECK((double)cpi->av_per_frame_bandwidth); 2580 } 2581 else 2582 { 2583 max_boost = 0.0; 2584 } 2585 2586 if (boost_score > max_boost) 2587 boost_score = max_boost; 2588 } 2589 2590 // Reset the first pass file position 2591 reset_fpf_position(cpi, start_position); 2592 2593 // Work out how many bits to allocate for the key frame itself 2594 if (1) 2595 { 2596 int kf_boost = boost_score; 2597 int allocation_chunks; 2598 int Counter = cpi->frames_to_key; 2599 int alt_kf_bits; 2600 YV12_BUFFER_CONFIG *lst_yv12 = &cpi->common.yv12_fb[cpi->common.lst_fb_idx]; 2601 // Min boost based on kf interval 2602 #if 0 2603 2604 while ((kf_boost < 48) && (Counter > 0)) 2605 { 2606 Counter -= 2; 2607 kf_boost ++; 2608 } 2609 2610 #endif 2611 2612 if (kf_boost < 48) 2613 { 2614 kf_boost += ((Counter + 1) >> 1); 2615 2616 if (kf_boost > 48) kf_boost = 48; 2617 } 2618 2619 // bigger frame sizes need larger kf boosts, smaller frames smaller boosts... 2620 if ((lst_yv12->y_width * lst_yv12->y_height) > (320 * 240)) 2621 kf_boost += 2 * (lst_yv12->y_width * lst_yv12->y_height) / (320 * 240); 2622 else if ((lst_yv12->y_width * lst_yv12->y_height) < (320 * 240)) 2623 kf_boost -= 4 * (320 * 240) / (lst_yv12->y_width * lst_yv12->y_height); 2624 2625 kf_boost = (int)((double)kf_boost * 100.0) >> 4; // Scale 16 to 100 2626 2627 // Adjustment to boost based on recent average q 2628 //kf_boost = kf_boost * vp8_kf_boost_qadjustment[cpi->ni_av_qi] / 100; 2629 2630 if (kf_boost < 250) // Min KF boost 2631 kf_boost = 250; 2632 2633 // We do three calculations for kf size. 2634 // The first is based on the error score for the whole kf group. 2635 // The second (optionaly) on the key frames own error if this is smaller than the average for the group. 2636 // The final one insures that the frame receives at least the allocation it would have received based on its own error score vs the error score remaining 2637 2638 allocation_chunks = ((cpi->frames_to_key - 1) * 100) + kf_boost; // cpi->frames_to_key-1 because key frame itself is taken care of by kf_boost 2639 2640 // Normalize Altboost and allocations chunck down to prevent overflow 2641 while (kf_boost > 1000) 2642 { 2643 kf_boost /= 2; 2644 allocation_chunks /= 2; 2645 } 2646 2647 cpi->kf_group_bits = (cpi->kf_group_bits < 0) ? 0 : cpi->kf_group_bits; 2648 2649 // Calculate the number of bits to be spent on the key frame 2650 cpi->kf_bits = (int)((double)kf_boost * ((double)cpi->kf_group_bits / (double)allocation_chunks)); 2651 2652 // Apply an additional limit for CBR 2653 if (cpi->oxcf.end_usage == USAGE_STREAM_FROM_SERVER) 2654 { 2655 if (cpi->kf_bits > ((3 * cpi->buffer_level) >> 2)) 2656 cpi->kf_bits = (3 * cpi->buffer_level) >> 2; 2657 } 2658 2659 // If the key frame is actually easier than the average for the 2660 // kf group (which does sometimes happen... eg a blank intro frame) 2661 // Then use an alternate calculation based on the kf error score 2662 // which should give a smaller key frame. 2663 if (kf_mod_err < kf_group_err / cpi->frames_to_key) 2664 { 2665 double alt_kf_grp_bits = 2666 ((double)cpi->bits_left * 2667 (kf_mod_err * (double)cpi->frames_to_key) / 2668 DOUBLE_DIVIDE_CHECK(cpi->modified_error_left)); 2669 2670 alt_kf_bits = (int)((double)kf_boost * 2671 (alt_kf_grp_bits / (double)allocation_chunks)); 2672 2673 if (cpi->kf_bits > alt_kf_bits) 2674 { 2675 cpi->kf_bits = alt_kf_bits; 2676 } 2677 } 2678 // Else if it is much harder than other frames in the group make sure 2679 // it at least receives an allocation in keeping with its relative 2680 // error score 2681 else 2682 { 2683 alt_kf_bits = 2684 (int)((double)cpi->bits_left * 2685 (kf_mod_err / 2686 DOUBLE_DIVIDE_CHECK(cpi->modified_error_left))); 2687 2688 if (alt_kf_bits > cpi->kf_bits) 2689 { 2690 cpi->kf_bits = alt_kf_bits; 2691 } 2692 } 2693 2694 cpi->kf_group_bits -= cpi->kf_bits; 2695 cpi->kf_bits += cpi->min_frame_bandwidth; // Add in the minimum frame allowance 2696 2697 cpi->per_frame_bandwidth = cpi->kf_bits; // Peer frame bit target for this frame 2698 cpi->target_bandwidth = cpi->kf_bits * cpi->output_frame_rate; // Convert to a per second bitrate 2699 } 2700 2701 // Note the total error score of the kf group minus the key frame itself 2702 cpi->kf_group_error_left = (int)(kf_group_err - kf_mod_err); 2703 2704 // Adjust the count of total modified error left. 2705 // The count of bits left is adjusted elsewhere based on real coded frame sizes 2706 cpi->modified_error_left -= kf_group_err; 2707 2708 if (cpi->oxcf.allow_spatial_resampling) 2709 { 2710 int resample_trigger = FALSE; 2711 int last_kf_resampled = FALSE; 2712 int kf_q; 2713 int scale_val = 0; 2714 int hr, hs, vr, vs; 2715 int new_width = cpi->oxcf.Width; 2716 int new_height = cpi->oxcf.Height; 2717 2718 int projected_buffer_level = cpi->buffer_level; 2719 int tmp_q; 2720 2721 double projected_bits_perframe; 2722 double group_iiratio = (kf_group_intra_err - first_frame.intra_error) / (kf_group_coded_err - first_frame.coded_error); 2723 double err_per_frame = kf_group_err / cpi->frames_to_key; 2724 double bits_per_frame; 2725 double av_bits_per_frame; 2726 double effective_size_ratio; 2727 2728 if ((cpi->common.Width != cpi->oxcf.Width) || (cpi->common.Height != cpi->oxcf.Height)) 2729 last_kf_resampled = TRUE; 2730 2731 // Set back to unscaled by defaults 2732 cpi->common.horiz_scale = NORMAL; 2733 cpi->common.vert_scale = NORMAL; 2734 2735 // Calculate Average bits per frame. 2736 //av_bits_per_frame = cpi->bits_left/(double)(cpi->total_stats->count - cpi->common.current_video_frame); 2737 av_bits_per_frame = cpi->oxcf.target_bandwidth / DOUBLE_DIVIDE_CHECK((double)cpi->oxcf.frame_rate); 2738 //if ( av_bits_per_frame < 0.0 ) 2739 // av_bits_per_frame = 0.0 2740 2741 // CBR... Use the clip average as the target for deciding resample 2742 if (cpi->oxcf.end_usage == USAGE_STREAM_FROM_SERVER) 2743 { 2744 bits_per_frame = av_bits_per_frame; 2745 } 2746 2747 // In VBR we want to avoid downsampling in easy section unless we are under extreme pressure 2748 // So use the larger of target bitrate for this sectoion or average bitrate for sequence 2749 else 2750 { 2751 bits_per_frame = cpi->kf_group_bits / cpi->frames_to_key; // This accounts for how hard the section is... 2752 2753 if (bits_per_frame < av_bits_per_frame) // Dont turn to resampling in easy sections just because they have been assigned a small number of bits 2754 bits_per_frame = av_bits_per_frame; 2755 } 2756 2757 // bits_per_frame should comply with our minimum 2758 if (bits_per_frame < (cpi->oxcf.target_bandwidth * cpi->oxcf.two_pass_vbrmin_section / 100)) 2759 bits_per_frame = (cpi->oxcf.target_bandwidth * cpi->oxcf.two_pass_vbrmin_section / 100); 2760 2761 // Work out if spatial resampling is necessary 2762 kf_q = estimate_kf_group_q(cpi, err_per_frame, bits_per_frame, group_iiratio); 2763 2764 // If we project a required Q higher than the maximum allowed Q then make a guess at the actual size of frames in this section 2765 projected_bits_perframe = bits_per_frame; 2766 tmp_q = kf_q; 2767 2768 while (tmp_q > cpi->worst_quality) 2769 { 2770 projected_bits_perframe *= 1.04; 2771 tmp_q--; 2772 } 2773 2774 // Guess at buffer level at the end of the section 2775 projected_buffer_level = cpi->buffer_level - (int)((projected_bits_perframe - av_bits_per_frame) * cpi->frames_to_key); 2776 2777 if (0) 2778 { 2779 FILE *f = fopen("Subsamle.stt", "a"); 2780 fprintf(f, " %8d %8d %8d %8d %12.0f %8d %8d %8d\n", cpi->common.current_video_frame, kf_q, cpi->common.horiz_scale, cpi->common.vert_scale, kf_group_err / cpi->frames_to_key, (int)(cpi->kf_group_bits / cpi->frames_to_key), new_height, new_width); 2781 fclose(f); 2782 } 2783 2784 // The trigger for spatial resampling depends on the various parameters such as whether we are streaming (CBR) or VBR. 2785 if (cpi->oxcf.end_usage == USAGE_STREAM_FROM_SERVER) 2786 { 2787 // Trigger resample if we are projected to fall below down sample level or 2788 // resampled last time and are projected to remain below the up sample level 2789 if ((projected_buffer_level < (cpi->oxcf.resample_down_water_mark * cpi->oxcf.optimal_buffer_level / 100)) || 2790 (last_kf_resampled && (projected_buffer_level < (cpi->oxcf.resample_up_water_mark * cpi->oxcf.optimal_buffer_level / 100)))) 2791 //( ((cpi->buffer_level < (cpi->oxcf.resample_down_water_mark * cpi->oxcf.optimal_buffer_level / 100))) && 2792 // ((projected_buffer_level < (cpi->oxcf.resample_up_water_mark * cpi->oxcf.optimal_buffer_level / 100))) )) 2793 resample_trigger = TRUE; 2794 else 2795 resample_trigger = FALSE; 2796 } 2797 else 2798 { 2799 long long clip_bits = (long long)(cpi->total_stats->count * cpi->oxcf.target_bandwidth / DOUBLE_DIVIDE_CHECK((double)cpi->oxcf.frame_rate)); 2800 long long over_spend = cpi->oxcf.starting_buffer_level - cpi->buffer_level; 2801 long long over_spend2 = cpi->oxcf.starting_buffer_level - projected_buffer_level; 2802 2803 if ((last_kf_resampled && (kf_q > cpi->worst_quality)) || // If triggered last time the threshold for triggering again is reduced 2804 ((kf_q > cpi->worst_quality) && // Projected Q higher than allowed and ... 2805 (over_spend > clip_bits / 20))) // ... Overspend > 5% of total bits 2806 resample_trigger = TRUE; 2807 else 2808 resample_trigger = FALSE; 2809 2810 } 2811 2812 if (resample_trigger) 2813 { 2814 while ((kf_q >= cpi->worst_quality) && (scale_val < 6)) 2815 { 2816 scale_val ++; 2817 2818 cpi->common.vert_scale = vscale_lookup[scale_val]; 2819 cpi->common.horiz_scale = hscale_lookup[scale_val]; 2820 2821 Scale2Ratio(cpi->common.horiz_scale, &hr, &hs); 2822 Scale2Ratio(cpi->common.vert_scale, &vr, &vs); 2823 2824 new_width = ((hs - 1) + (cpi->oxcf.Width * hr)) / hs; 2825 new_height = ((vs - 1) + (cpi->oxcf.Height * vr)) / vs; 2826 2827 // Reducing the area to 1/4 does not reduce the complexity (err_per_frame) to 1/4... 2828 // effective_sizeratio attempts to provide a crude correction for this 2829 effective_size_ratio = (double)(new_width * new_height) / (double)(cpi->oxcf.Width * cpi->oxcf.Height); 2830 effective_size_ratio = (1.0 + (3.0 * effective_size_ratio)) / 4.0; 2831 2832 // Now try again and see what Q we get with the smaller image size 2833 kf_q = estimate_kf_group_q(cpi, err_per_frame * effective_size_ratio, bits_per_frame, group_iiratio); 2834 2835 if (0) 2836 { 2837 FILE *f = fopen("Subsamle.stt", "a"); 2838 fprintf(f, "******** %8d %8d %8d %12.0f %8d %8d %8d\n", kf_q, cpi->common.horiz_scale, cpi->common.vert_scale, kf_group_err / cpi->frames_to_key, (int)(cpi->kf_group_bits / cpi->frames_to_key), new_height, new_width); 2839 fclose(f); 2840 } 2841 } 2842 } 2843 2844 if ((cpi->common.Width != new_width) || (cpi->common.Height != new_height)) 2845 { 2846 cpi->common.Width = new_width; 2847 cpi->common.Height = new_height; 2848 vp8_alloc_compressor_data(cpi); 2849 } 2850 } 2851 } 2852