1 /* 2 * Copyright (C) 2010 NXP Semiconductors 3 * 4 * Licensed under the Apache License, Version 2.0 (the "License"); 5 * you may not use this file except in compliance with the License. 6 * You may obtain a copy of the License at 7 * 8 * http://www.apache.org/licenses/LICENSE-2.0 9 * 10 * Unless required by applicable law or agreed to in writing, software 11 * distributed under the License is distributed on an "AS IS" BASIS, 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13 * See the License for the specific language governing permissions and 14 * limitations under the License. 15 */ 16 17 /** 18 * \file phFriNfc_NdefMap.h 19 * \brief NFC Ndef Mapping For Different Smart Cards. 20 * 21 * Project: NFC-FRI 22 * 23 * $Date: Mon Dec 13 14:14:14 2010 $ 24 * $Author: ing02260 $ 25 * $Revision: 1.25 $ 26 * $Aliases: $ 27 * 28 */ 29 30 #ifndef PHFRINFC_NDEFMAP_H 31 #define PHFRINFC_NDEFMAP_H 32 33 34 /*include files*/ 35 #include <phNfcTypes.h> 36 #include <phNfcStatus.h> 37 #include <phFriNfc.h> 38 #ifdef PH_HAL4_ENABLE 39 #include <phHal4Nfc.h> 40 #else 41 #include <phHalNfc.h> 42 #endif 43 44 45 #include <phFriNfc_OvrHal.h> 46 47 #ifndef PH_FRINFC_EXCLUDE_FROM_TESTFW /* */ 48 49 /** 50 * \name NDEF Mapping 51 * 52 * File: \ref phFriNfc_NdefMap.h 53 * 54 */ 55 /*@{*/ 56 #define PH_FRINFC_NDEFMAP_FILEREVISION "$Revision: 1.25 $" /**< \ingroup grp_file_attributes */ 57 #define PH_FRINFC_NDEFMAP_FILEALIASES "$Aliases: $" /**< \ingroup grp_file_attributes */ 58 /*@}*/ 59 60 #endif /* PH_FRINFC_EXCLUDE_FROM_TESTFW */ 61 62 63 /** \defgroup grp_fri_nfc_ndef_map NDEF Mapping Component 64 * 65 * This component implements the read/write/check NDEF functions for remote devices. 66 * NDEF data, as defined by the NFC Forum NDEF specification are written to or read from 67 * a remote device that can be a smart- or memory card. \n\n 68 * Please notice that the NDEF mapping command sequence must 69 * be \b contiguous (after correct initialisation): \n 70 * \b Examples: 71 * - Checking and Reading 72 * - \ref phFriNfc_NdefMap_ChkNdef 73 * - \ref phFriNfc_NdefMap_RdNdef 74 * . 75 * - Checking and Writing 76 * - \ref phFriNfc_NdefMap_ChkNdef 77 * - \ref phFriNfc_NdefMap_WrNdef 78 * . 79 * - Checking, Reading and Writing 80 * - \ref phFriNfc_NdefMap_ChkNdef 81 * - \ref phFriNfc_NdefMap_RdNdef 82 * - \ref phFriNfc_NdefMap_WrNdef 83 * . 84 * . 85 * There must be \b no \b other FRI or HAL call between these mapping commands. Exceptions to this 86 * rule are specific to the NDEF mapping of certain card / remote device types and separately noted, 87 * typically for true multi-activation capable devices. 88 * 89 */ 90 91 /** 92 * \name NDEF Mapping - specifies the different card types 93 * These are the only recognised card types in this version. 94 * 95 */ 96 /*@{*/ 97 98 #define DESFIRE_EV1 99 100 #define PH_FRINFC_NDEFMAP_MIFARE_UL_CARD 1 /**< \internal Mifare UL */ 101 #define PH_FRINFC_NDEFMAP_ISO14443_4A_CARD 2 /**< \internal Iso 14443-4A */ 102 #define PH_FRINFC_NDEFMAP_MIFARE_STD_1K_CARD 3 /**< \internal Mifare Standard */ 103 #define PH_FRINFC_NDEFMAP_MIFARE_STD_4K_CARD 4 /**< \internal Mifare Standard */ 104 #define PH_FRINFC_NDEFMAP_FELICA_SMART_CARD 5 /**< \internal Felica Smart Tag */ 105 #define PH_FRINFC_NDEFMAP_TOPAZ_CARD 7 /**< \internal Felica Smart Tag */ 106 #define PH_FRINFC_NDEFMAP_TOPAZ_DYNAMIC_CARD 8 /**< \internal Felica Smart Tag */ 107 #ifdef DESFIRE_EV1 108 #define PH_FRINFC_NDEFMAP_ISO14443_4A_CARD_EV1 9 /**< \internal Iso 14443-4A EV1 */ 109 #endif /* #ifdef DESFIRE_EV1 */ 110 111 #define PH_FRINFC_NDEFMAP_ISO15693_CARD 10 /**< \internal ISO 15693 */ 112 113 114 #ifdef PH_NDEF_MIFARE_ULC 115 #define PH_FRINFC_NDEFMAP_MIFARE_ULC_CARD 8 /**< \internal Mifare UL */ 116 #endif /* #ifdef PH_NDEF_MIFARE_ULC */ 117 118 #define PH_FRINFC_NDEFMAP_EMPTY_NDEF_MSG {0xD0, 0x00, 0x00} /**< \internal Empty ndef message */ 119 120 121 #ifdef PHFRINFC_OVRHAL_MOCKUP /* */ 122 #define PH_FRINFC_NDEFMAP_MOCKUP_CARD 6 /**< \internal Mocup*/ 123 #endif /* PHFRINFC_OVRHAL_MOCKUP */ 124 125 126 127 /* Enum reperesents the different card state*/ 128 typedef enum 129 { 130 PH_NDEFMAP_CARD_STATE_INITIALIZED, 131 PH_NDEFMAP_CARD_STATE_READ_ONLY, 132 PH_NDEFMAP_CARD_STATE_READ_WRITE, 133 PH_NDEFMAP_CARD_STATE_INVALID 134 }phNDEF_CARD_STATE; 135 136 137 /*@}*/ 138 139 140 #ifndef PH_FRINFC_MAP_MIFARESTD_DISABLED 141 /** 142 * \name NDEF Mapping - specifies the Compliant Blocks in the Mifare 1k and 4k card types 143 * 144 */ 145 /*@{*/ 146 #define PH_FRINFC_NDEFMAP_MIFARESTD_1KNDEF_COMPBLOCK 45 /**< \internal Total Ndef Compliant blocks Mifare 1k */ 147 #define PH_FRINFC_NDEFMAP_MIFARESTD_4KNDEF_COMPBLOCK 210 /**< \internal Total Ndef Compliant blocks Mifare 4k */ 148 #define PH_FRINFC_NDEFMAP_MIFARESTD_RDWR_SIZE 16 /**< \internal Bytes read/write for one read/write operation*/ 149 #define PH_FRINFC_NDEFMAP_MIFARESTD_TOTALNO_BLK 40 /**< \internal Total number of sectors in Mifare 4k */ 150 #define PH_FRINFC_NDEFMAP_MIFARESTD_ST15_BYTES 15 /**< \internal To store 15 bytes after reading a block */ 151 /*@}*/ 152 #endif /* PH_FRINFC_MAP_MIFARESTD_DISABLED */ 153 154 #ifndef PH_FRINFC_MAP_TOPAZ_DISABLED 155 /** 156 * \name NDEF Mapping - specifies the Compliant Blocks in the Mifare 1k and 4k card types 157 * 158 */ 159 /*@{*/ 160 #define PH_FRINFC_NDEFMAP_TOPAZ_MAX_SIZE 256 /**< \internal Total Memory size = 96 bytes (newer version have mode) */ 161 #define PH_FRINFC_NDEFMAP_TOPAZ_UID_SIZE 0x04 /**< \internal UID size returned by READID command = 4 bytes */ 162 /*@}*/ 163 #endif /* PH_FRINFC_MAP_TOPAZ_DISABLED */ 164 165 #ifndef PH_FRINFC_MAP_FELICA_DISABLED 166 /* Felica Mapping - Constants */ 167 #define PH_FRINFC_NDEFMAP_FELICA_BLOCK_SIZE 16 168 #define PH_FRINFC_NDEFMAP_FELICA_ATTR_NDEF_DATA_LEN 3 169 #define PH_FRINFC_NDEFMAP_FELICA_MANUF_ID_DATA_LEN 8 170 #endif /* PH_FRINFC_MAP_FELICA_DISABLED */ 171 172 /* MifareUL/Type2 specific constants*/ 173 #ifndef PH_FRINFC_MAP_MIFAREUL_DISABLED 174 175 #ifdef PH_NDEF_MIFARE_ULC 176 #define PH_FRINFC_NDEFMAP_MFUL_64BYTES_BUF 2048 /**< \internal To store 2048 bytes after reading entire card */ 177 #else 178 #define PH_FRINFC_NDEFMAP_MFUL_64BYTES_BUF 64 /**< \internal To store 64 bytes after reading entire card */ 179 #endif /*#ifdef PH_NDEF_MIFARE_ULC */ 180 181 #define PH_FRINFC_NDEFMAP_MFUL_4BYTES_BUF 4 /**< \internal To store 4 bytes after write */ 182 183 #endif /*#ifndef PH_FRINFC_MAP_MIFAREUL_DISABLED*/ 184 185 #ifdef PHFRINFC_OVRHAL_MOCKUP /* */ 186 187 #define PH_FRINFC_NDEFMAP_MOCKUP_4096BYTES_BUF 4096 /**< \internal To store 4 bytes after write */ 188 189 #endif /*#ifndef PH_FRINFC_MAP_MOCKUP_DISABLED*/ 190 191 /** 192 * \name Completion Routine Indices 193 * 194 * These are the indices of the completion routine pointers within the component context. 195 * Completion routines belong to upper components. 196 * 197 */ 198 /*@{*/ 199 /** \ingroup grp_fri_nfc_ndef_map 200 * Completion Routine Index for \ref phFriNfc_NdefMap_ChkNdef */ 201 #define PH_FRINFC_NDEFMAP_CR_CHK_NDEF 0 /* */ 202 /** \ingroup grp_fri_nfc_ndef_map 203 * Completion Routine Index for \ref phFriNfc_NdefMap_RdNdef */ 204 #define PH_FRINFC_NDEFMAP_CR_RD_NDEF 1 /* */ 205 /** \ingroup grp_fri_nfc_ndef_map 206 * Completion Routine Index for \ref phFriNfc_NdefMap_WrNdef */ 207 #define PH_FRINFC_NDEFMAP_CR_WR_NDEF 2 /* */ 208 /** \ingroup grp_fri_nfc_ndef_map 209 * Completion Routine Index for \ref phFriNfc_NdefMap_EraseNdef */ 210 #define PH_FRINFC_NDEFMAP_CR_ERASE_NDEF 3 /* */ 211 /** \ingroup grp_fri_nfc_ndef_map Completion 212 * Routine Index for Unknown States/Operations */ 213 #define PH_FRINFC_NDEFMAP_CR_INVALID_OPE 4 /* */ 214 /** \ingroup grp_fri_nfc_ndef_map 215 * Number of completion routines that have to be initialised */ 216 #define PH_FRINFC_NDEFMAP_CR 5 /* */ 217 /*@}*/ 218 219 /** 220 * \name File Offset Attributes 221 * 222 * Following values are used to determine the offset value for Read/Write. This specifies whether 223 * the Read/Write operation needs to be restarted/continued from the last offset set. 224 * 225 */ 226 /*@{*/ 227 /** \ingroup grp_fri_nfc_ndef_map 228 * Read/Write operation shall start from the last offset set */ 229 #define PH_FRINFC_NDEFMAP_SEEK_CUR 0 /* */ 230 /** \ingroup grp_fri_nfc_ndef_map 231 * Read/Write operation shall start from the begining of the file/card */ 232 #define PH_FRINFC_NDEFMAP_SEEK_BEGIN 1 /* */ 233 /*@}*/ 234 235 236 /** 237 * \name Buffer Size Definitions 238 * 239 */ 240 /*@{*/ 241 /** \ingroup grp_fri_nfc_ndef_map Minimum size of the TRX buffer required */ 242 #define PH_FRINFC_NDEFMAP_MAX_SEND_RECV_BUF_SIZE 252 /* */ 243 /** \internal The size of s MIFARE block */ 244 #define PH_FRINFC_NDEFMAP_MF_READ_BLOCK_SIZE 16 /* */ 245 246 247 #ifndef PH_FRINFC_EXCLUDE_FROM_TESTFW /* */ 248 249 250 #ifndef PH_FRINFC_MAP_ISO15693_DISABLED 251 252 #define ISO15693_MAX_DATA_TO_STORE 0x04U 253 254 typedef struct phFriNfc_ISO15693Cont 255 { 256 /**< \internal block number that is executed */ 257 uint16_t current_block; 258 /**< \internal The state of the operation */ 259 uint8_t state; 260 /**< \internal Completion routine index */ 261 uint8_t cr_index; 262 /**< \internal Execution sequence */ 263 uint8_t ndef_seq; 264 /**< \internal NDEF TLV size */ 265 uint16_t actual_ndef_size; 266 /**< \internal NDEF TLV size */ 267 uint16_t max_data_size; 268 /**< \internal NDEF TLV TYPE block number */ 269 uint16_t ndef_tlv_type_blk; 270 /**< \internal NDEF TLV TYPE byte number in the 271 "ndef_tlv_type_blk" */ 272 uint8_t ndef_tlv_type_byte; 273 /**< \internal Store the remaining bytes that can be used for 274 READ with continue option */ 275 uint8_t store_read_data[ISO15693_MAX_DATA_TO_STORE]; 276 uint8_t store_length; 277 /**< \internal Remaining size that can be read */ 278 uint16_t remaining_size_to_read; 279 uint8_t read_capabilities; 280 281 282 }phFriNfc_ISO15693Cont_t; 283 284 #endif /* #ifndef PH_FRINFC_MAP_ISO15693_DISABLED */ 285 286 287 288 #ifndef PH_FRINFC_MAP_FELICA_DISABLED 289 /** 290 * \ingroup grp_fri_nfc_ndef_map 291 * \brief Felica Basic structure which details the different vaiables 292 * used for Reading/writing. 293 * 294 */ 295 typedef struct phFriNfc_Felica 296 { 297 /**< Current block being read or written*/ 298 uint8_t CurBlockNo; 299 300 /**< No. Of Written*/ 301 uint8_t NoBlocksWritten; 302 303 /**< Following are different variables used for write operation*/ 304 uint8_t Wr_BytesRemained; /* No of bytes to pad*/ 305 306 /**< Buffer to store odd number of block data */ 307 uint8_t Wr_RemainedBytesBuff[PH_FRINFC_NDEFMAP_FELICA_BLOCK_SIZE]; 308 309 /**< Following are different variables used for read operation*/ 310 uint8_t Rd_NoBytesToCopy; /*specifies the extra number of read bytes */ 311 312 /**< stores extra read data bytes*/ 313 uint8_t Rd_BytesToCopyBuff[PH_FRINFC_NDEFMAP_FELICA_BLOCK_SIZE]; 314 315 /**< Flag determines Intermediate Copy Operation*/ 316 uint8_t IntermediateCpyFlag; 317 318 /**< Stores Intermediate Copy data len*/ 319 uint8_t IntermediateCpyLen; 320 321 /**< Flag specifies Pad Byte Information*/ 322 uint8_t PadByteFlag; 323 324 /**< Flag specifies Intermediate WR Information*/ 325 uint8_t IntermediateWrFlag; 326 327 /**< Flag specifies Intermediate Rd Information*/ 328 uint8_t IntermediateRdFlag; 329 330 /**< Flag specifies Last Block Reached Information*/ 331 uint8_t LastBlkReachedFlag; 332 333 /**< Specifies how many bytes read from the card*/ 334 uint16_t CurrBytesRead; 335 336 /**< Flag specifies EOF card reached Information*/ 337 uint8_t EofCardReachedFlag; 338 339 /**< Flag specifies different Operation Types*/ 340 uint8_t OpFlag; 341 342 /**< Specifies Offset*/ 343 uint8_t Offset; 344 345 /**< Specifies TrxLen Information*/ 346 uint16_t TrxLen; 347 348 }phFriNfc_Felica_t; 349 350 /** 351 * \ingroup grp_fri_nfc_ndef_map 352 * \brief Felica structure which details the different vaiables 353 * used to store the poll related information. 354 * 355 */ 356 typedef struct phFriNfc_Felica_PollDetails 357 { 358 phHal_sDevInputParam_t *DevInputParam; 359 #ifndef PH_HAL4_ENABLE 360 phHal_eOpModes_t *OpMode; 361 #endif 362 /**< Temporary place holder to the Remote Device 363 Information, required to store the Felica 364 session opened information. */ 365 phHal_sRemoteDevInformation_t psTempRemoteDevInfo; 366 }phFriNfc_Felica_PollDetails_t; 367 368 /** 369 * \ingroup grp_fri_nfc_ndef_map 370 * \brief Felica structure which details the attribute related information. 371 * 372 */ 373 typedef struct phFriNfc_Felica_AttrInfo 374 { 375 /** Version of the Ndefmap document*/ 376 uint8_t Version; 377 /** Nbr for check cmd*/ 378 uint8_t Nbr; 379 /** Nbw for update cmd*/ 380 uint8_t Nbw; 381 /** Maximum number of blocks to store Ndef data*/ 382 uint16_t Nmaxb; 383 /** Flag to indicate the status of the write operation*/ 384 uint8_t WriteFlag; 385 /** Flag to indicate the status of the read/write operation*/ 386 uint8_t RdWrFlag; 387 /** Represents the length of Ndef data : 3 bytes*/ 388 uint8_t LenBytes[PH_FRINFC_NDEFMAP_FELICA_ATTR_NDEF_DATA_LEN]; 389 /** Specifies the ERASE NDEF Message Operation */ 390 uint8_t EraseMsgFlag; 391 392 }phFriNfc_Felica_AttrInfo_t; 393 394 /** 395 * \ingroup grp_fri_nfc_ndef_map 396 * \brief Felica structure which details the different vaiables 397 * used to store the Card Manufacturer details. 398 */ 399 typedef struct phFriNfc_Felica_ManufDetails 400 { 401 /** Manufacture identifier*/ 402 uint8_t ManufID[PH_FRINFC_NDEFMAP_FELICA_MANUF_ID_DATA_LEN]; 403 /** Manufacture Parameters*/ 404 uint8_t ManufParameter[PH_FRINFC_NDEFMAP_FELICA_MANUF_ID_DATA_LEN]; 405 }phFriNfc_Felica_ManufDetails_t; 406 #endif /* PH_FRINFC_MAP_FELICA_DISABLED */ 407 408 #ifndef PH_FRINFC_MAP_MIFARESTD_DISABLED 409 typedef struct phFriNfc_MifareStdCont 410 { 411 /** Device input parameter for poll and connect after failed authentication */ 412 phHal_sDevInputParam_t *DevInputParam; 413 /** to store bytes that will be used in the 414 next write/read operation, if any */ 415 uint8_t internalBuf[PH_FRINFC_NDEFMAP_MIFARESTD_ST15_BYTES]; 416 /** to Store the length of the internalBuf */ 417 uint16_t internalLength; 418 /** holds the block number which is presently been used */ 419 uint8_t currentBlock; 420 /** the number of Ndef Compliant blocks written/read */ 421 uint8_t NdefBlocks; 422 /** Total Number of Ndef Complaint Blocks */ 423 uint16_t NoOfNdefCompBlocks; 424 /** used in write ndef, to know that internal bytes 425 are accessed */ 426 uint8_t internalBufFlag; 427 /** used in write ndef, to know that last 16 bytes 428 are used to write*/ 429 uint8_t RemainingBufFlag; 430 /** indicates that Read has reached the end of the 431 card */ 432 uint8_t ReadWriteCompleteFlag; 433 /** indicates that Read has reached the end of the 434 card */ 435 uint8_t ReadCompleteFlag; 436 /** indicates that Write is possible or not */ 437 uint8_t WriteFlag; 438 /** indicates that Write is possible or not */ 439 uint8_t ReadFlag; 440 /** indicates that Write is possible or not */ 441 uint8_t RdBeforeWrFlag; 442 /** Authentication Flag indicating that a particular 443 sector is authenticated or not */ 444 uint8_t AuthDone; 445 /** to store the last Sector ID in Check Ndef */ 446 uint8_t SectorIndex; 447 /** to read the access bits of each sector */ 448 uint8_t ReadAcsBitFlag; 449 /** Buffer to store 16 bytes */ 450 uint8_t Buffer[PH_FRINFC_NDEFMAP_MIFARESTD_RDWR_SIZE]; 451 /** to store the AIDs of Mifare 1k or 4k */ 452 uint8_t aid[PH_FRINFC_NDEFMAP_MIFARESTD_TOTALNO_BLK]; 453 /** flag to write with offset begin */ 454 uint8_t WrNdefFlag; 455 /** flag to read with offset begin */ 456 uint8_t ReadNdefFlag; 457 /** flag to check with offset begin */ 458 uint8_t ChkNdefFlag; 459 /** To store the remaining size of the Mifare 1k or 4k card */ 460 uint16_t remainingSize; 461 /** To update the remaining size when writing to the Mifare 1k or 4k card */ 462 uint8_t remSizeUpdFlag; 463 /** The flag is to know that there is a different AID apart from 464 NFC forum sector AID */ 465 uint16_t aidCompleteFlag; 466 /** The flag is to know that there is a a NFC forum sector exists 467 in the card */ 468 uint16_t NFCforumSectFlag; 469 /** The flag is to know that the particular sector is a proprietary 470 NFC forum sector */ 471 uint16_t ProprforumSectFlag; 472 /** The flag is set after reading the MAD sectors */ 473 uint16_t ChkNdefCompleteFlag; 474 /** Flag to store the current block */ 475 uint8_t TempBlockNo; 476 /** Completion routine index */ 477 uint8_t CRIndex; 478 /** Bytes remaining to write for one write procedure */ 479 uint16_t WrLength; 480 /** Flag to read after write */ 481 uint8_t RdAfterWrFlag; 482 /** Flag to say that poll is required before write ndef (authentication) */ 483 uint8_t PollFlag; 484 /** Flag is to know that this is first time the read has been called. This 485 is required when read is called after write (especially for the card formatted 486 with the 2nd configuration) */ 487 uint8_t FirstReadFlag; 488 /** Flag is to know that this is first time the write has been called. This 489 is required when the card formatted with the 3rd configuration */ 490 uint8_t FirstWriteFlag; 491 }phFriNfc_MifareStdCont_t; 492 /*@}*/ 493 #endif /* PH_FRINFC_MAP_MIFARESTD_DISABLED */ 494 495 #ifndef PH_FRINFC_MAP_DESFIRE_DISABLED 496 /** 497 * \ingroup grp_fri_nfc_ndef_map 498 * \brief Capability Container. 499 * 500 * The Capability Container structure required for smart card operations. 501 * 502 */ 503 typedef struct phFriNfc_DesfireCapCont 504 { 505 uint16_t DesfVersion; /**< \internal Desfire Version . */ 506 uint16_t NdefMsgFid; /**< \internal Ndef Message file pointer*/ 507 uint16_t NdefFileSize; /**< \internal Holds Desfire File Size */ 508 uint8_t ReadAccess; /**< \internal Read Access Information. */ 509 uint8_t WriteAccess; /**< \internal Write Access Information. */ 510 uint16_t MaxRespSize; /**< \internal Maximum expected response size. */ 511 uint16_t MaxCmdSize; /**< \internal Maximum command size. */ 512 uint16_t NdefDataLen; /**< \internal Holds actual NDEF Data Len.*/ 513 uint8_t IsNlenPresentFlag; /**< \internal specifies NLEN presence .*/ 514 uint8_t SkipNlenBytesFlag; /**< \internal sets on presence of NLEN.*/ 515 } phFriNfc_DesfireCapCont_t; 516 #endif /* PH_FRINFC_MAP_DESFIRE_DISABLED */ 517 518 #ifndef PH_FRINFC_MAP_MIFAREUL_DISABLED 519 /** 520 * \ingroup grp_fri_nfc_ndef_map 521 * \brief Mifare UL Basic structure which details the different vaiables 522 * used for Reading/writing. 523 * 524 */ 525 typedef struct phFriNfc_MifareULCont 526 { 527 /** to store bytes that will be used in the 528 next write/read operation, if any */ 529 uint8_t InternalBuf[PH_FRINFC_NDEFMAP_MFUL_4BYTES_BUF]; 530 /** to Store the length of the internalBuf */ 531 uint16_t InternalLength; 532 /** holds the sector number which is presently been used */ 533 uint8_t CurrentSector; 534 /** holds the block number which is presently been used */ 535 uint8_t CurrentBlock; 536 /** to know the completion routine */ 537 uint8_t CRindex; 538 /** This stores the free memory size left in the card */ 539 uint16_t RemainingSize; 540 /** Copy all the data(including non NDEF TLVs) from the card */ 541 uint8_t ReadBuf[PH_FRINFC_NDEFMAP_MFUL_64BYTES_BUF]; 542 /** index of the above buffer */ 543 uint16_t ReadBufIndex; 544 /** This variable stores the index of the "ReadBuf" from which actual 545 data has to be copied into the user buffer */ 546 uint16_t ByteNumber; 547 /** indicates that read/write has reached the end of the 548 card */ 549 uint8_t ReadWriteCompleteFlag; 550 /** Buffer to store 4 bytes of data which is written to a block */ 551 uint8_t Buffer[PH_FRINFC_NDEFMAP_MFUL_4BYTES_BUF]; 552 }phFriNfc_MifareULCont_t; 553 #endif /* PH_FRINFC_MAP_MIFAREUL_DISABLED */ 554 555 #ifdef PHFRINFC_OVRHAL_MOCKUP /* */ 556 /** 557 * \ingroup grp_fri_nfc_ndef_map 558 * \brief Mifare UL Basic structure which details the different vaiables 559 * used for Reading/writing. 560 * 561 */ 562 typedef struct phFriNfc_MockupCont 563 { 564 /** to store bytes that will be used in the 565 next write/read operation, if any */ 566 uint8_t *NdefData; 567 /** to Store the length of the internalBuf */ 568 uint32_t NdefActualSize; 569 /** to Store the length of the internalBuf */ 570 uint32_t NdefMaxSize; 571 /** to Store the length of the internalBuf */ 572 uint32_t CardSize; 573 /** holds the block number which is presently been used */ 574 uint32_t CurrentBlock; 575 } phFriNfc_MockupCont_t; 576 #endif /* PHFRINFC_OVRHAL_MOCKUP */ 577 578 #endif /* PH_FRINFC_EXCLUDE_FROM_TESTFW */ 579 580 /** 581 * \ingroup grp_fri_nfc_ndef_map 582 * \brief NDEF TLV structure which details the different vaiables 583 * used for TLV. 584 * 585 */ 586 typedef struct phFriNfc_NDEFTLVCont 587 { 588 /** Flag is to know that the TLV Type Found */ 589 uint8_t NdefTLVFoundFlag; 590 /** Sector number of the next/present available TLV */ 591 uint8_t NdefTLVSector; 592 /** Following two variables are used to store the 593 T byte and the Block number in which the T is 594 found in Tag */ 595 /** Byte number of the next/present available TLV */ 596 uint16_t NdefTLVByte; 597 /** Block number of the next/present available TLV */ 598 uint8_t NdefTLVBlock; 599 /** Authentication flag for NDEF TLV Block */ 600 uint8_t NdefTLVAuthFlag; 601 /** if the 16th byte of the last read is type (T) of TLV 602 and next read contains length (L) bytes of TLV. This flag 603 is set when the type (T) of TLV is found in the last read */ 604 uint8_t TcheckedinTLVFlag; 605 /** if the 16th byte of the last read is Length (L) of TLV 606 and next read contains length (L) bytes of TLV. This flag 607 is set when the Length (L) of TLV is found in the last read */ 608 uint8_t LcheckedinTLVFlag; 609 /** This flag is set, if Terminator TLV is already written 610 and next read contains value (V) bytes of TLV. This flag 611 is set when the value (V) of TLV is found in the last read */ 612 uint8_t SetTermTLVFlag; 613 /** To know the number of Length (L) field is present in the 614 next block */ 615 uint8_t NoLbytesinTLV; 616 /** The value of 3 bytes length(L) field in TLV. In 3 bytes 617 length field, 2 bytes are in one block and other 1 byte 618 is in the next block. To store the former block length 619 field value, this variable is used */ 620 uint16_t prevLenByteValue; 621 /** The value of length(L) field in TLV. */ 622 uint16_t BytesRemainLinTLV; 623 /** Actual size to read and write. This will be always equal to the 624 length (L) of TLV as there is only one NDEF TLV . */ 625 uint16_t ActualSize; 626 /** Flag is to write the length (L) field of the TLV */ 627 uint8_t WrLenFlag; 628 /** Flag is to write the length (L) field of the TLV */ 629 uint16_t NULLTLVCount; 630 /** Buffer to store 4 bytes of data which is written to a block */ 631 uint8_t NdefTLVBuffer[PH_FRINFC_NDEFMAP_MFUL_4BYTES_BUF]; 632 /** Buffer to store 4 bytes of data which is written to a next block */ 633 uint8_t NdefTLVBuffer1[PH_FRINFC_NDEFMAP_MFUL_4BYTES_BUF]; 634 }phFriNfc_NDEFTLVCont_t; 635 636 /** 637 * \ingroup grp_fri_nfc_ndef_map 638 * \brief Lock Control TLV structure which stores the Position, 639 * Size and PageCntrl details. 640 */ 641 642 typedef struct phFriNfc_LockCntrlTLVCont 643 { 644 /** Specifies the Byte Position of the lock cntrl tlv 645 in the card memory*/ 646 uint16_t ByteAddr; 647 648 /** Specifies the Size of the lock area in terms of 649 bits/bytes*/ 650 uint16_t Size; 651 652 /** Specifies the Bytes per Page*/ 653 uint8_t BytesPerPage; 654 655 /** Specifies the BytesLockedPerLockBit */ 656 uint8_t BytesLockedPerLockBit; 657 658 /** Specifies the index of Lock cntrl TLV*/ 659 uint8_t LockTlvBuffIdx; 660 661 /** Store the content of Lock cntrl TLV*/ 662 uint8_t LockTlvBuff[8]; 663 664 /** Specifies the Block number Lock cntrl TLV*/ 665 uint16_t BlkNum; 666 667 /** Specifies the Byte Number position of Lock cntrl TLV*/ 668 uint16_t ByteNum; 669 670 671 }phFriNfc_LockCntrlTLVCont_t; 672 673 674 /** 675 * \ingroup grp_fri_nfc_ndef_map 676 * \brief Memeory Control TLV structure which stores the Position, 677 * Size and PageCntrl details of the reserved byte area. 678 */ 679 680 typedef struct phFriNfc_ResMemCntrlTLVCont 681 { 682 /** Specifies the Byte Position of the lock cntrl tlv 683 in the card memory*/ 684 uint16_t ByteAddr; 685 686 /** Specifies the Size of the lock area in terms of 687 bits/bytes*/ 688 uint16_t Size; 689 690 /** Store the content of Memory cntrl TLV*/ 691 uint8_t MemCntrlTlvBuff[8]; 692 693 /** Specifies the Bytes per Page*/ 694 uint8_t BytesPerPage; 695 696 /** Specifies the index of Mem cntrl TLV*/ 697 uint8_t MemTlvBuffIdx; 698 699 /** Specifies the Block number Lock cntrl TLV*/ 700 uint16_t BlkNum; 701 702 /** Specifies the Byte Number position of Lock cntrl TLV*/ 703 uint16_t ByteNum; 704 705 706 707 }phFriNfc_ResMemCntrlTLVCont_t; 708 709 #if !(defined(PH_FRINFC_MAP_TOPAZ_DISABLED ) || defined (PH_FRINFC_MAP_TOPAZ_DYNAMIC_DISABLED )) 710 711 /** 712 * \ingroup grp_fri_nfc_ndef_map 713 * \brief Topaz container structure which details the different vaiables 714 * used for Topaz card mapping. 715 * 716 */ 717 typedef struct phFriNfc_TopazCont 718 { 719 /** This stores the free memory size left in the card. In case of topaz, 720 this is updated only during check ndef */ 721 uint16_t RemainingSize; 722 /** Stores the current block number */ 723 uint8_t CurrentBlock; 724 /** Stores the current block number */ 725 uint8_t ByteNumber; 726 /** To know the completion routine call */ 727 uint8_t CRIndex; 728 729 uint8_t ReadWriteCompleteFlag; 730 /** This state is used for write */ 731 uint8_t InternalState; 732 /** This state is used for write */ 733 uint8_t SkipLockBlkFlag; 734 /** To store the UID */ 735 uint8_t UID[PH_FRINFC_NDEFMAP_TOPAZ_UID_SIZE]; 736 /** To CC bytes length */ 737 uint8_t CCByteBuf[4]; 738 /** Store the Buffer Index */ 739 uint16_t Cur_RW_Index; 740 741 /* No of bytes read or write*/ 742 uint16_t ByteRWFrmCard; 743 744 /* Cuurent Segment */ 745 uint8_t CurrentSeg; 746 747 /** Store the read bytes */ 748 uint8_t ReadBuffer[PH_FRINFC_NDEFMAP_TOPAZ_MAX_SIZE]; 749 750 /** Size to know the exact data filled in the ReadBuffer. Useful, when the 751 offset = PH_FRINFC_NDEFMAP_SEEK_CUR */ 752 uint8_t ReadBufferSize; 753 754 /** NDEF TLV byte address, This stores the byte address of 755 TYPE field of the TLV */ 756 uint16_t NdefTLVByteAddress; 757 758 /** Expected sequence */ 759 uint8_t ExpectedSeq; 760 761 /** Write sequence */ 762 uint8_t WriteSeq; 763 764 /** Actual NDEF message size */ 765 uint16_t ActualNDEFMsgSize; 766 767 /** NDEF Read Write size in the card, this excludes lock and reserved bytes, 768 mentioned in the LOCK and MEMORY control TLVs */ 769 uint16_t NDEFRWSize; 770 771 /** Remaining read size in the card, after reading the card. 772 User has asked for the data less than " ActualNDEFMsgSize ", 773 then remaining read bytes are stored in this variable. 774 If the next read is with offset = PH_FRINFC_NDEFMAP_SEEK_CUR, 775 then this variable is used. 776 */ 777 uint16_t RemainingReadSize; 778 #ifdef FRINFC_READONLY_NDEF 779 uint8_t read_only_seq; 780 uint8_t lock_bytes_written; 781 #endif /* #ifdef FRINFC_READONLY_NDEF */ 782 783 }phFriNfc_TopazCont_t; 784 785 #endif /* PH_FRINFC_MAP_TOPAZ_DISABLED */ 786 /** 787 * \ingroup grp_fri_nfc_ndef_map 788 * \brief NFC NDEF Mapping Component Context Structure 789 * 790 * This structure is used to store the current context information of the instance. 791 * 792 */ 793 typedef struct phFriNfc_NdefMap 794 { 795 /**< \internal The state of the operation. */ 796 uint8_t State; 797 798 /**< \internal Completion Routine Context. */ 799 phFriNfc_CplRt_t CompletionRoutine[PH_FRINFC_NDEFMAP_CR]; 800 801 /**< \internal Pointer to the lower (HAL) instance. */ 802 void *LowerDevice; 803 804 /**<\internal Holds the device additional informations*/ 805 phHal_sDepAdditionalInfo_t psDepAdditionalInfo; 806 807 /**<\internal Holds the completion routine informations of the Map Layer*/ 808 phFriNfc_CplRt_t MapCompletionInfo; 809 810 /**< \internal Pointer to the Remote Device Information */ 811 phHal_sRemoteDevInformation_t *psRemoteDevInfo; 812 813 /**<\internal Holds the Command Type(read/write)*/ 814 phHal_uCmdList_t Cmd; 815 816 /**< \internal Pointer to a temporary buffer. Could be 817 used for read/write purposes */ 818 uint8_t *ApduBuffer; 819 820 /**< \internal Size allocated to the ApduBuffer. */ 821 uint32_t ApduBufferSize; 822 823 /**< \internal Index to the APDU Buffer. Used for internal calculations */ 824 uint16_t ApduBuffIndex; 825 826 /**< \internal Pointer to the user-provided Data Size to be written trough WrNdef function. */ 827 uint32_t *WrNdefPacketLength; 828 829 830 /**< \internal Holds the length of the received data. */ 831 uint16_t *SendRecvLength; 832 833 /**<\internal Holds the ack of some intial commands*/ 834 uint8_t *SendRecvBuf; 835 836 /**< \internal Holds the length of the data to be sent. */ 837 uint16_t SendLength; 838 839 /**< \internal Data Byte Count, which gives the offset to the integration.*/ 840 uint16_t *DataCount; 841 842 /**< \ internal Holds the previous operation on the card*/ 843 uint8_t PrevOperation; 844 845 /**< \ internal Holds the previous state on the card*/ 846 uint8_t PrevState; 847 848 /**< \internal Stores the type of the smart card. */ 849 uint8_t CardType; 850 851 /**< \internal Stores the card state. */ 852 uint8_t CardState; 853 854 /**< \internal Stores the memory size of the card */ 855 uint16_t CardMemSize; 856 857 /**<\internal to Store the page offset on the mifare ul card*/ 858 uint8_t Offset; 859 860 /** \internal specifies the desfire operation to be performed*/ 861 uint8_t DespOpFlag; 862 863 /** \internal Used to remeber how many bytes were written, to update 864 the dataCount and the BufferIndex */ 865 uint16_t NumOfBytesWritten; 866 867 /**\internal used to remember number of L byte Remaining to be written */ 868 uint16_t NumOfLReminWrite; 869 870 /** \internal Pointer Used to remeber and return how many bytes were read, 871 to update the PacketDataLength in case of Read operation */ 872 /* Fix for 0000238: [gk] MAP: Number of bytes actually read out is 873 not returned. */ 874 uint32_t *NumOfBytesRead; 875 876 /** \internal Flag used to tell the process function that WRITE has 877 requested for an internal READ.*/ 878 uint8_t ReadingForWriteOperation; 879 880 /** \internal Buffer of 5 bytes used for the write operation for the 881 Mifare UL card.*/ 882 uint8_t BufferForWriteOp[5]; 883 884 /** \internal Temporary Receive Length to update the Receive Length 885 when every time the Overlapped HAL is called. */ 886 uint16_t TempReceiveLength; 887 888 uint8_t NoOfDevices ; 889 890 /** \internal stores operating mode type of the felica smart tag */ 891 /* phHal_eOpModes_t OpModeType[2]; */ 892 893 /** \internal stores the type of the TLV found */ 894 uint8_t TLVFoundFlag; 895 896 /** \internal stores the TLV structure related informations */ 897 phFriNfc_NDEFTLVCont_t TLVStruct; 898 899 900 /** \internal stores the Lock Contrl Tlv related informations */ 901 phFriNfc_LockCntrlTLVCont_t LockTlv; 902 903 /** \internal stores the Mem Contrl Tlv related informations */ 904 phFriNfc_ResMemCntrlTLVCont_t MemTlv; 905 906 907 908 /** Capabilitity Containers: */ 909 #ifndef PH_FRINFC_EXCLUDE_FROM_TESTFW /* */ 910 /** \internal Desfire capability Container Structure. */ 911 #ifndef PH_FRINFC_MAP_DESFIRE_DISABLED 912 phFriNfc_DesfireCapCont_t DesfireCapContainer; 913 #endif /* PH_FRINFC_MAP_DESFIRE_DISABLED */ 914 915 #ifndef PH_FRINFC_MAP_MIFARESTD_DISABLED 916 /** \internal Pointer to the Mifare Standard capability Container Structure. */ 917 phFriNfc_MifareStdCont_t StdMifareContainer; 918 #endif /* PH_FRINFC_MAP_MIFARESTD_DISABLED */ 919 920 #ifndef PH_FRINFC_MAP_FELICA_DISABLED 921 /** \internal Following are the Felica Smart tag related strucutre & variables */ 922 phFriNfc_Felica_t Felica; 923 924 /** \internal Struture Stores the dev i/p , opmode informations of smart tag */ 925 phFriNfc_Felica_PollDetails_t FelicaPollDetails; 926 927 /** \internal Struture Stores the different attribute informations of smart tag */ 928 phFriNfc_Felica_AttrInfo_t FelicaAttrInfo; 929 930 /** \internal Struture Stores the PMm,IDm informations of smart tag */ 931 phFriNfc_Felica_ManufDetails_t FelicaManufDetails; 932 #endif /* PH_FRINFC_MAP_FELICA_DISABLED */ 933 #ifndef PH_FRINFC_MAP_MIFAREUL_DISABLED 934 /** \internal Mifare UL capability container structure. */ 935 phFriNfc_MifareULCont_t MifareULContainer; 936 #endif /* PH_FRINFC_MAP_MIFAREUL_DISABLED */ 937 #ifndef PH_FRINFC_MAP_TOPAZ_DISABLED 938 /** \internal Mifare UL capability container structure. */ 939 phFriNfc_TopazCont_t TopazContainer; 940 #endif /* PH_FRINFC_MAP_TOPAZ_DISABLED */ 941 942 #ifndef PH_FRINFC_MAP_ISO15693_DISABLED 943 phFriNfc_ISO15693Cont_t ISO15693Container; 944 #endif /* #ifndef PH_FRINFC_MAP_ISO15693_DISABLED */ 945 946 #ifdef PHFRINFC_OVRHAL_MOCKUP 947 phFriNfc_MockupCont_t MochupContainer; 948 #endif /* PHFRINFC_OVRHAL_MOCKUP */ 949 950 #endif /* PH_FRINFC_EXCLUDE_FROM_TESTFW */ 951 952 } phFriNfc_NdefMap_t; 953 954 955 #ifndef PH_FRINFC_EXCLUDE_FROM_TESTFW /* */ 956 957 /** 958 * \ingroup grp_fri_nfc_ndef_map 959 * 960 * \brief Ndef Mapping \b Reset function 961 * 962 * \copydoc page_reg Resets the component instance to the initial state and initialises the 963 * internal variables. 964 * 965 * \param[in] NdefMap is a Pointer to a valid and initialised or uninitialised instance 966 * of \ref phFriNfc_NdefMap_t . 967 * \param[in] LowerDevice Overlapped HAL reference, pointing at a valid instance of this 968 * underlying component. 969 * \param[in] psRemoteDevInfo Points to the Remote Device Information structure encapsulating 970 * the information about the device (Smart card, NFC device) to access. 971 * \param[in] psDevInputParam The Device input parameter, as used for the HAL POLL function. 972 * This parameter is needed by the component in special cases, when an internal call 973 * to POLL is required again, such as for FeliCa. The storage of the structure behind 974 * the pointer must be retained by the calling software. The component itself only 975 * keeps the reference. No change is applied to the structure's content. 976 * \param[in] TrxBuffer Pointer to an internally used buffer. The buffer has to be allocated by 977 * the integrating software (not done by the component). The purpose of 978 * this storage is to serve as an intermediate buffer for data frame 979 * composition and analysis. 980 * The size shall be at least \ref PH_FRINFC_NDEFMAP_MAX_SEND_RECV_BUF_SIZE . 981 * \param[in] TrxBufferSize The size of TrxBuffer: 982 * The size shall be at least \ref PH_FRINFC_NDEFMAP_MAX_SEND_RECV_BUF_SIZE . 983 * \param[in] ReceiveBuffer Pointer to a buffer that the component uses internally use to 984 * store the data received from the lower component. 985 * The size shall be at least \ref PH_FRINFC_NDEFMAP_MAX_SEND_RECV_BUF_SIZE . 986 * \param[in] ReceiveLength The size of ReceiveBuffer. This specifies the actual length 987 * of the data received from the lower component. 988 * The size shall be at least \ref PH_FRINFC_NDEFMAP_MAX_SEND_RECV_BUF_SIZE . 989 * \param[in] DataCount Specifies the offset count during read/write operations. This can be 990 * used by the integrating software to know about the total number of bytes read/written 991 * from/to the card. The caller shall set the value behind the pointer to zero 992 * before calling this function. 993 * 994 * \retval NFCSTATUS_SUCCESS Operation successful. 995 * \retval NFCSTATUS_INVALID_PARAMETER At least one parameter of the function is invalid. 996 * 997 * \note The DataCount variable is internally updated by the module and must not be changed by the 998 * embedding software. 999 * \note This function has to be called at the beginning, after creating an instance of 1000 * \ref phFriNfc_NdefMap_t . Use this function to reset the instance and/or to switch 1001 * to a different underlying device (different NFC device or device mode). 1002 */ 1003 NFCSTATUS phFriNfc_NdefMap_Reset(phFriNfc_NdefMap_t *NdefMap, 1004 void *LowerDevice, 1005 phHal_sRemoteDevInformation_t *psRemoteDevInfo, 1006 phHal_sDevInputParam_t *psDevInputParam, 1007 uint8_t *TrxBuffer, 1008 uint16_t TrxBufferSize, 1009 uint8_t *ReceiveBuffer, 1010 uint16_t *ReceiveLength, 1011 uint16_t *DataCount); 1012 1013 1014 /** 1015 * \ingroup grp_fri_nfc_ndef_map 1016 * 1017 * \brief Ndef Mapping \b Set \b Completion \b Routine function 1018 * 1019 * \copydoc page_reg Setting of the Completion Routine. 1020 * 1021 * This function sets the Completion Routine for the specified function ID:\n 1022 * The completion routine is a function of an upper layer in the stack that needs to be notified 1023 * when the current instance has completed an I/O operation and data and/or an I/O status value 1024 * is available. The list of valid function IDs can be found under the section 1025 * "Completion Routine Indices", like e.g. \ref PH_FRINFC_NDEFMAP_CR_CHK_NDEF. 1026 * 1027 * \param[in] NdefMap Pointer to a valid instance of the \ref phFriNfc_NdefMap_t structure 1028 * serving as the component context. 1029 * \param[in] FunctionID ID of the component API function to set a with a completion routine for. 1030 * A valid routine has to be assigned for each function ID. 1031 * Use the "Completion Routine Indices", such as \ref PH_FRINFC_NDEFMAP_CR_CHK_NDEF . 1032 * \param[in] CompletionRoutine Pointer to a completion routine (part of a component of the upper layer) 1033 * to be called when the non-blocking opertaion has finished. 1034 * \param[in] CompletionRoutineContext Pointer to the context of the (upper) component where the 1035 * particular completion routine is located. 1036 * 1037 * \retval NFCSTATUS_SUCCESS Operation successful. 1038 * \retval NFCSTATUS_INVALID_PARAMETER At least one parameter of the function is invalid. 1039 * 1040 * \note This function has to be called after \ref phFriNfc_NdefMap_Reset . 1041 */ 1042 NFCSTATUS phFriNfc_NdefMap_SetCompletionRoutine(phFriNfc_NdefMap_t *NdefMap, 1043 uint8_t FunctionID, 1044 pphFriNfc_Cr_t CompletionRoutine, 1045 void *CompletionRoutineContext); 1046 1047 1048 /** 1049 * \ingroup grp_fri_nfc_ndef_map 1050 * 1051 * \brief Ndef Mapping \b Read \b Ndef function 1052 * 1053 * \copydoc page_ovr Initiates Reading of NDEF information from the Remote Device. 1054 * 1055 * The function initiates the reading of NDEF information from a Remote Device. 1056 * It performs a reset of the state and restarts the state machine. 1057 * 1058 * \param[in] NdefMap Pointer to a valid instance of the \ref phFriNfc_NdefMap_t 1059 * component context structure. 1060 * \param[in,out] PacketData Pointer to a location that shall receive the NDEF Packet. 1061 * \param[in,out] PacketDataLength Pointer to a variable that shall receive the length of the NDEF packet. 1062 * The caller has to provide the maximum length, the function fills 1063 * in the actual number of bytes received. 1064 * \param[in] Offset Indicates whether the read operation shall start from the begining of the 1065 * file/card storage \b or continue from the last offset. The last Offset set is stored 1066 * within a context (Data Count) variable (must not be modified by the integration). 1067 * If the caller sets the value to \ref PH_FRINFC_NDEFMAP_SEEK_CUR, the component shall 1068 * start reading from the last offset set (continue where it has stopped before). 1069 * If set to \ref PH_FRINFC_NDEFMAP_SEEK_BEGIN, the component shall start reading 1070 * from the begining of the card (restarted) 1071 * 1072 * \retval NFCSTATUS_PENDING The action has been successfully triggered. 1073 * \retval NFCSTATUS_SUCCESS Operation Successful. 1074 * 1075 * \retval NFCSTATUS_INVALID_PARAMETER At least one parameter of the function is invalid. 1076 * \retval NFCSTATUS_INVALID_REMOTE_DEVICE Card Type is unsupported. 1077 * \retval NFCSTATUS_EOF_CARD_REACHED No Space in the File to read. 1078 * \retval NFCSTATUS_INVALID_DEVICE The device has not been opened or has been disconnected 1079 * meanwhile. 1080 * \retval NFCSTATUS_CMD_ABORTED The caller/driver has aborted the request. 1081 * \retval NFCSTATUS_BUFFER_TOO_SMALL The buffer provided by the caller is too small. 1082 * \retval NFCSTATUS_RF_TIMEOUT No data has been received within the TIMEOUT period. 1083 * 1084 */ 1085 NFCSTATUS phFriNfc_NdefMap_RdNdef(phFriNfc_NdefMap_t *NdefMap, 1086 uint8_t *PacketData, 1087 uint32_t *PacketDataLength, 1088 uint8_t Offset); 1089 1090 1091 /** 1092 * \ingroup grp_fri_nfc_ndef_map 1093 * 1094 * \brief Ndef Mapping \b Check \b Ndef function 1095 * 1096 * \copydoc page_ovr Initiates Writing of NDEF information to the Remote Device. 1097 * 1098 * The function initiates the writing of NDEF information to a Remote Device. 1099 * It performs a reset of the state and starts the action (state machine). 1100 * A periodic call of the \ref phFriNfc_NdefMap_Process has to be done once the action 1101 * has been triggered. 1102 * 1103 * \param[in] NdefMap Pointer to a valid instance of the \ref phFriNfc_NdefMap_t 1104 * component context structure. 1105 * \param[in] PacketData Pointer to a location that holds the prepared NDEF Packet. 1106 * \param[in,out] PacketDataLength Pointer to a variable that shall specify the length of the prepared NDEF packet. 1107 * The caller has to provide the length, the function fills 1108 * in the actual number of bytes received. 1109 * \param[in] Offset Indicates whether the write operation shall start from the begining of the 1110 * file/card storage \b or continue from the last offset. The last Offset set is stored 1111 * within a context (Data Count) variable (must not be modified by the integration). 1112 * If the caller sets the value to \ref PH_FRINFC_NDEFMAP_SEEK_CUR, the component shall 1113 * start writing from the last offset set (continue where it has stopped before). 1114 * If set to \ref PH_FRINFC_NDEFMAP_SEEK_BEGIN, the component shall start writing 1115 * from the begining of the card (restarted) 1116 * 1117 * \retval NFCSTATUS_PENDING The action has been successfully triggered. 1118 * \retval NFCSTATUS_SUCCESS Operation Successful. 1119 * 1120 * \retval NFCSTATUS_INVALID_PARAMETER At least one parameter of the function is invalid. 1121 * \retval NFCSTATUS_INVALID_REMOTE_DEVICE Card Type is unsupported. 1122 * \retval NFCSTATUS_EOF_CARD_REACHED No Space in the File to write. 1123 * \retval NFCSTATUS_INVALID_DEVICE The device has not been opened or has been disconnected 1124 * meanwhile. 1125 * \retval NFCSTATUS_CMD_ABORTED The caller/driver has aborted the request. 1126 * \retval NFCSTATUS_BUFFER_TOO_SMALL The buffer provided by the caller is too small. 1127 * \retval NFCSTATUS_RF_TIMEOUT No data has been received within the TIMEOUT period. 1128 * 1129 */ 1130 1131 extern NFCSTATUS phFriNfc_NdefMap_WrNdef(phFriNfc_NdefMap_t *NdefMap, 1132 uint8_t *PacketData, 1133 uint32_t *PacketDataLength, 1134 uint8_t Offset); 1135 1136 1137 /** 1138 * \ingroup grp_fri_nfc_ndef_map 1139 * 1140 * \brief Ndef Mapping \b Check \b NDEF function 1141 * 1142 * \copydoc page_ovr Check whether a particular Remote Device is NDEF compliant. 1143 * 1144 * \param[in] NdefMap Pointer to a valid instance of the \ref phFriNfc_NdefMap_t 1145 * component context structure. 1146 * 1147 * \retval NFCSTATUS_PENDING The action has been successfully triggered. 1148 * \retval NFCSTATUS_INVALID_PARAMETER At least one parameter of the function is invalid. 1149 * \retval NFCSTATUS_INVALID_REMOTE_DEVICE Card Type is unsupported. 1150 * \retval NFCSTATUS_INVALID_PARAMETER Completion Routine is NULL. 1151 * \retval NFCSTATUS_INVALID_REMOTE_DEVICE OpModes invalid. 1152 * \retval NFCSTATUS_INVALID_DEVICE The device has not been opened or has been disconnected 1153 * meanwhile. 1154 * \retval NFCSTATUS_CMD_ABORTED The caller/driver has aborted the request. 1155 * \retval NFCSTATUS_BUFFER_TOO_SMALL The buffer provided by the caller is too small. 1156 * \retval NFCSTATUS_RF_TIMEOUT No data has been received within the TIMEOUT period. 1157 * 1158 */ 1159 NFCSTATUS phFriNfc_NdefMap_ChkNdef(phFriNfc_NdefMap_t *NdefMap); 1160 1161 #ifdef FRINFC_READONLY_NDEF 1162 /*! 1163 * \ingroup grp_fri_smart_card_formatting 1164 * 1165 * \brief Initiates the conversion of the already NDEF formatted tag to READ ONLY. 1166 * 1167 * \copydoc page_ovr The function initiates the conversion of the already NDEF formatted 1168 * tag to READ ONLY.After this formation, remote card would be properly Ndef Compliant and READ ONLY. 1169 * Depending upon the different card type, this function handles formatting procedure. 1170 * This function supports only for the TOPAZ tags. 1171 * 1172 * \param[in] NdefMap Pointer to a valid instance of the \ref phFriNfc_NdefMap_t structure describing 1173 * the component context. 1174 * \retval NFCSTATUS_PENDING The action has been successfully triggered. 1175 * \retval Other values An error has occurred. 1176 * 1177 */ 1178 NFCSTATUS 1179 phFriNfc_NdefMap_ConvertToReadOnly ( 1180 phFriNfc_NdefMap_t *NdefMap); 1181 1182 #endif /* #ifdef FRINFC_READONLY_NDEF */ 1183 1184 /** 1185 * \ingroup grp_fri_nfc_ndef_map 1186 * 1187 * \brief Ndef Mapping \b Erase \b NDEF function 1188 * 1189 * \copydoc page_ovr find the position of the existing NDEF TLV and overwrite with \b empty NDEF 1190 * message \b at that position. 1191 * 1192 * \param[in] NdefMap Pointer to a valid instance of the \ref phFriNfc_NdefMap_t 1193 * component context structure. 1194 * 1195 * \retval NFCSTATUS_PENDING The action has been successfully triggered. 1196 * \retval NFCSTATUS_INVALID_PARAMETER At least one parameter of the function is invalid. 1197 * \retval NFCSTATUS_INVALID_REMOTE_DEVICE Card Type is unsupported. 1198 * \retval NFCSTATUS_INVALID_PARAMETER Completion Routine is NULL. 1199 * \retval NFCSTATUS_INVALID_REMOTE_DEVICE OpModes invalid. 1200 * \retval NFCSTATUS_INVALID_DEVICE The device has not been opened or has been disconnected 1201 * meanwhile. 1202 * \retval NFCSTATUS_CMD_ABORTED The caller/driver has aborted the request. 1203 * \retval NFCSTATUS_BUFFER_TOO_SMALL The buffer provided by the caller is too small. 1204 * \retval NFCSTATUS_RF_TIMEOUT No data has been received within the TIMEOUT period. 1205 * 1206 */ 1207 NFCSTATUS phFriNfc_NdefMap_EraseNdef(phFriNfc_NdefMap_t *NdefMap); 1208 1209 /** 1210 * \ingroup grp_fri_nfc_ndef_map 1211 * 1212 * \brief Ndef Mapping \b Get Container size function 1213 * 1214 * \copydoc page_ovr Returns the size of the NDEF data that the card can hold to the caller. 1215 * 1216 * \param[in] NdefMap Pointer to a valid instance of the \ref phFriNfc_NdefMap_t 1217 * component context structure. 1218 * 1219 * \param[out] size Pointer to a uint32_t variable, which receives the size of the NDEF data 1220 * 1221 * \retval NFCSTATUS_SUCCESS The size has been successfully calculated. 1222 * \retval NFCSTATUS_INVALID_PARAMETER At least one parameter of the function is invalid. 1223 * \retval NFCSTATUS_INVALID_REMOTE_DEVICE Card Type is unsupported. 1224 * 1225 */ 1226 1227 NFCSTATUS phFriNfc_NdefMap_GetContainerSize(const phFriNfc_NdefMap_t *NdefMap,uint32_t *maxSize, uint32_t *actualSize); 1228 1229 /** 1230 * \ingroup grp_fri_nfc_ndef_map 1231 * 1232 * \brief Ndef Mapping \b Completion \b Routine or \b Process function 1233 * 1234 * \copydoc page_cb Completion Routine: This function is called by the lower layer (OVR HAL) 1235 * when an I/O operation has finished. The internal state machine decides 1236 * whether to call into the lower device again or to complete the process 1237 * by calling into the upper layer's completion routine, stored within this 1238 * component's context (\ref phFriNfc_NdefMap_t). 1239 * 1240 * The function call scheme is according to \ref grp_interact. No State reset is performed during 1241 * operation. 1242 * 1243 * \param[in] Context The context of the current (not the lower/upper) instance, as set by the lower, 1244 * calling layer, upon its completion. 1245 * \param[in] Status The completion status of the lower layer (to be handled by the implementation of 1246 * the state machine of this function like a regular return value of an internally 1247 * called function). 1248 * 1249 * \note For general information about the completion routine interface please see \ref pphFriNfc_Cr_t . * The Different Status Values are as follows 1250 * 1251 */ 1252 void phFriNfc_NdefMap_Process(void *Context, 1253 NFCSTATUS Status); 1254 1255 1256 1257 /** 1258 * \ingroup grp_fri_nfc_ndef_map 1259 * 1260 * \brief Ndef Mapping \b Check And Parse TLV Structure \b NDEF function 1261 * 1262 * \copydoc page_ovr Checks the presence of a valid TLV's(NDEF/Propritery). 1263 * 1264 * \param[in] NdefMap Pointer to a valid instance of the \ref phFriNfc_NdefMap_t 1265 * component context structure. 1266 * 1267 * \retval NFCSTATUS_INVALID_FORMAT No valid TLV Found. 1268 * \retval NFCSTATUS_SUCCESS Operation Successful. 1269 * 1270 */ 1271 NFCSTATUS phFriNfc_ChkAndParseTLV(phFriNfc_NdefMap_t *NdefMap); 1272 1273 1274 #ifdef PHFRINFC_OVRHAL_MOCKUP /* */ 1275 1276 /** 1277 * \ingroup grp_fri_nfc_ndef_map 1278 * 1279 * \brief Set data NDEF in mockup mode 1280 * 1281 * \param[in] NdefMap Pointer to a valid instance of the \ref phFriNfc_NdefMap_t component context structure. 1282 * \param[in] NdefData Pointer to card mockup data 1283 * \param[in] NdefActualSize The actual data length 1284 * \param[in] NdefMaxSize The max data length 1285 * \param[in] NdefCardSize The total card size 1286 * 1287 * \retval NFCSTATUS_SUCCESS The operation is ok. 1288 * 1289 */ 1290 NFCSTATUS phFriNfc_NdefMap_MockupCardSetter(phFriNfc_NdefMap_t *NdefMap, uint8_t *NdefData, uint32_t NdefActualSize, uint32_t NdefMaxSize, uint32_t CardSize); 1291 NFCSTATUS phFriNfc_NdefMap_MockupNDefModeEn(uint8_t *pNdefCompliancy, uint8_t *pCardType, uint8_t Enable); 1292 #endif /*#ifndef PH_FRINFC_MAP_MOCKUP_DISABLED*/ 1293 1294 1295 /** 1296 * \internal 1297 * \name States of the FSM. 1298 * 1299 */ 1300 /*@{*/ 1301 #define PH_FRINFC_NDEFMAP_STATE_RESET_INIT 0 /**< \internal Initial state */ 1302 #define PH_FRINFC_NDEFMAP_STATE_CR_REGISTERED 1 /**< \internal CR has been registered */ 1303 #define PH_FRINFC_NDEFMAP_STATE_EOF_CARD 2 /**< \internal EOF card reached */ 1304 /*@}*/ 1305 1306 /* Following values specify the previous operation on the card. This value is assigned to 1307 the context structure variable: PrevOperation. */ 1308 1309 /**< Previous operation is check*/ 1310 #define PH_FRINFC_NDEFMAP_CHECK_OPE 1 1311 /**< Previous operation is read*/ 1312 #define PH_FRINFC_NDEFMAP_READ_OPE 2 1313 /**< Previous operation is write */ 1314 #define PH_FRINFC_NDEFMAP_WRITE_OPE 3 1315 /**< Previous operation is Actual size */ 1316 #define PH_FRINFC_NDEFMAP_GET_ACTSIZE_OPE 4 1317 1318 /* This flag is set when there is a need of write operation on the odd positions 1319 ex: 35,5 etc. This is used with MfUlOp Flag */ 1320 #define PH_FRINFC_MFUL_INTERNAL_READ 3 /**< \internal Read/Write control*/ 1321 1322 1323 #endif /* PH_FRINFC_EXCLUDE_FROM_TESTFW */ 1324 1325 #endif /* PHFRINFC_NDEFMAP_H */ 1326
