-t <transport> Specify the communication transport. Valid options are:
HCI Local device with Host Controller Interface (default).
USB Direct USB connection.
BCSP Blue Core Serial Protocol.
H4 H4 serial protocol.
3WIRE 3WIRE protocol (not implemented).
-d <dev> Specify a particular device to operate on. If not specified, default is the first available HCI device or /dev/ttyS0 for serial transports.
builddef Get build definitions
keylen <handle> Get current crypt key length
clock Get local Bluetooth clock
rand Get random number
chiprev Get chip revision
buildname Get the full build name
panicarg Get panic code argument
faultarg Get fault code argument
coldreset Perform cold reset
warmreset Perform warm reset
disabletx Disable TX on the device
enabletx Enable TX on the device
singlechan <channel> Lock radio on specific channel
hoppingon Revert to channel hopping
rttxdata1 <decimal freq MHz> <level> TXData1 radio test
radiotest <decimal freq MHz> <level> <id> Run radio tests, tests 4, 6 and 7 are transmit tests
memtypes Get memory types
psget [-r] [-s <stores>] <key> Get value for PS key. -r sends a warm reset afterwards
psset [-r] [-s <stores>] <key> <value> Set value for PS key. -r sends a warm reset afterwards
psclr [-r] [-s <stores>] <key> Clear value for PS key. -r sends a warm reset afterwards
pslist [-r] [-s <stores>] List all PS keys. -r sends a warm reset afterwards
psread [-r] [-s <stores>] Read all PS keys. -r sends a warm reset afterwards
psload [-r] [-s <stores>] <file> Load all PS keys from PSR file. -r sends a warm reset afterwards
pscheck [-r] [-s <stores>] <file> Check syntax of PSR file. -r sends a warm reset afterwards
