1 /* 2 SDL - Simple DirectMedia Layer 3 Copyright (C) 1997-2006 Sam Lantinga 4 5 This library is free software; you can redistribute it and/or 6 modify it under the terms of the GNU Lesser General Public 7 License as published by the Free Software Foundation; either 8 version 2.1 of the License, or (at your option) any later version. 9 10 This library is distributed in the hope that it will be useful, 11 but WITHOUT ANY WARRANTY; without even the implied warranty of 12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 13 Lesser General Public License for more details. 14 15 You should have received a copy of the GNU Lesser General Public 16 License along with this library; if not, write to the Free Software 17 Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 18 19 Sam Lantinga 20 slouken (at) libsdl.org 21 */ 22 23 /* Access to the raw audio mixing buffer for the SDL library */ 24 25 #ifndef _SDL_audio_h 26 #define _SDL_audio_h 27 28 #include "SDL_stdinc.h" 29 #include "SDL_error.h" 30 #include "SDL_endian.h" 31 #include "SDL_mutex.h" 32 #include "SDL_thread.h" 33 #include "SDL_rwops.h" 34 35 #include "begin_code.h" 36 /* Set up for C function definitions, even when using C++ */ 37 #ifdef __cplusplus 38 extern "C" { 39 #endif 40 41 /* The calculated values in this structure are calculated by SDL_OpenAudio() */ 42 typedef struct SDL_AudioSpec { 43 int freq; /* DSP frequency -- samples per second */ 44 Uint16 format; /* Audio data format */ 45 Uint8 channels; /* Number of channels: 1 mono, 2 stereo */ 46 Uint8 silence; /* Audio buffer silence value (calculated) */ 47 Uint16 samples; /* Audio buffer size in samples (power of 2) */ 48 Uint16 padding; /* Necessary for some compile environments */ 49 Uint32 size; /* Audio buffer size in bytes (calculated) */ 50 /* This function is called when the audio device needs more data. 51 'stream' is a pointer to the audio data buffer 52 'len' is the length of that buffer in bytes. 53 Once the callback returns, the buffer will no longer be valid. 54 Stereo samples are stored in a LRLRLR ordering. 55 */ 56 void (SDLCALL *callback)(void *userdata, Uint8 *stream, int len); 57 void *userdata; 58 } SDL_AudioSpec; 59 60 /* Audio format flags (defaults to LSB byte order) */ 61 #define AUDIO_U8 0x0008 /* Unsigned 8-bit samples */ 62 #define AUDIO_S8 0x8008 /* Signed 8-bit samples */ 63 #define AUDIO_U16LSB 0x0010 /* Unsigned 16-bit samples */ 64 #define AUDIO_S16LSB 0x8010 /* Signed 16-bit samples */ 65 #define AUDIO_U16MSB 0x1010 /* As above, but big-endian byte order */ 66 #define AUDIO_S16MSB 0x9010 /* As above, but big-endian byte order */ 67 #define AUDIO_U16 AUDIO_U16LSB 68 #define AUDIO_S16 AUDIO_S16LSB 69 70 /* Native audio byte ordering */ 71 #if SDL_BYTEORDER == SDL_LIL_ENDIAN 72 #define AUDIO_U16SYS AUDIO_U16LSB 73 #define AUDIO_S16SYS AUDIO_S16LSB 74 #else 75 #define AUDIO_U16SYS AUDIO_U16MSB 76 #define AUDIO_S16SYS AUDIO_S16MSB 77 #endif 78 79 80 /* A structure to hold a set of audio conversion filters and buffers */ 81 typedef struct SDL_AudioCVT { 82 int needed; /* Set to 1 if conversion possible */ 83 Uint16 src_format; /* Source audio format */ 84 Uint16 dst_format; /* Target audio format */ 85 double rate_incr; /* Rate conversion increment */ 86 Uint8 *buf; /* Buffer to hold entire audio data */ 87 int len; /* Length of original audio buffer */ 88 int len_cvt; /* Length of converted audio buffer */ 89 int len_mult; /* buffer must be len*len_mult big */ 90 double len_ratio; /* Given len, final size is len*len_ratio */ 91 void (SDLCALL *filters[10])(struct SDL_AudioCVT *cvt, Uint16 format); 92 int filter_index; /* Current audio conversion function */ 93 } SDL_AudioCVT; 94 95 96 /* Function prototypes */ 97 98 /* These functions are used internally, and should not be used unless you 99 * have a specific need to specify the audio driver you want to use. 100 * You should normally use SDL_Init() or SDL_InitSubSystem(). 101 */ 102 extern DECLSPEC int SDLCALL SDL_AudioInit(const char *driver_name); 103 extern DECLSPEC void SDLCALL SDL_AudioQuit(void); 104 105 /* This function fills the given character buffer with the name of the 106 * current audio driver, and returns a pointer to it if the audio driver has 107 * been initialized. It returns NULL if no driver has been initialized. 108 */ 109 extern DECLSPEC char * SDLCALL SDL_AudioDriverName(char *namebuf, int maxlen); 110 111 /* 112 * This function opens the audio device with the desired parameters, and 113 * returns 0 if successful, placing the actual hardware parameters in the 114 * structure pointed to by 'obtained'. If 'obtained' is NULL, the audio 115 * data passed to the callback function will be guaranteed to be in the 116 * requested format, and will be automatically converted to the hardware 117 * audio format if necessary. This function returns -1 if it failed 118 * to open the audio device, or couldn't set up the audio thread. 119 * 120 * When filling in the desired audio spec structure, 121 * 'desired->freq' should be the desired audio frequency in samples-per-second. 122 * 'desired->format' should be the desired audio format. 123 * 'desired->samples' is the desired size of the audio buffer, in samples. 124 * This number should be a power of two, and may be adjusted by the audio 125 * driver to a value more suitable for the hardware. Good values seem to 126 * range between 512 and 8096 inclusive, depending on the application and 127 * CPU speed. Smaller values yield faster response time, but can lead 128 * to underflow if the application is doing heavy processing and cannot 129 * fill the audio buffer in time. A stereo sample consists of both right 130 * and left channels in LR ordering. 131 * Note that the number of samples is directly related to time by the 132 * following formula: ms = (samples*1000)/freq 133 * 'desired->size' is the size in bytes of the audio buffer, and is 134 * calculated by SDL_OpenAudio(). 135 * 'desired->silence' is the value used to set the buffer to silence, 136 * and is calculated by SDL_OpenAudio(). 137 * 'desired->callback' should be set to a function that will be called 138 * when the audio device is ready for more data. It is passed a pointer 139 * to the audio buffer, and the length in bytes of the audio buffer. 140 * This function usually runs in a separate thread, and so you should 141 * protect data structures that it accesses by calling SDL_LockAudio() 142 * and SDL_UnlockAudio() in your code. 143 * 'desired->userdata' is passed as the first parameter to your callback 144 * function. 145 * 146 * The audio device starts out playing silence when it's opened, and should 147 * be enabled for playing by calling SDL_PauseAudio(0) when you are ready 148 * for your audio callback function to be called. Since the audio driver 149 * may modify the requested size of the audio buffer, you should allocate 150 * any local mixing buffers after you open the audio device. 151 */ 152 extern DECLSPEC int SDLCALL SDL_OpenAudio(SDL_AudioSpec *desired, SDL_AudioSpec *obtained); 153 154 /* 155 * Get the current audio state: 156 */ 157 typedef enum { 158 SDL_AUDIO_STOPPED = 0, 159 SDL_AUDIO_PLAYING, 160 SDL_AUDIO_PAUSED 161 } SDL_audiostatus; 162 extern DECLSPEC SDL_audiostatus SDLCALL SDL_GetAudioStatus(void); 163 164 /* 165 * This function pauses and unpauses the audio callback processing. 166 * It should be called with a parameter of 0 after opening the audio 167 * device to start playing sound. This is so you can safely initialize 168 * data for your callback function after opening the audio device. 169 * Silence will be written to the audio device during the pause. 170 */ 171 extern DECLSPEC void SDLCALL SDL_PauseAudio(int pause_on); 172 173 /* 174 * This function loads a WAVE from the data source, automatically freeing 175 * that source if 'freesrc' is non-zero. For example, to load a WAVE file, 176 * you could do: 177 * SDL_LoadWAV_RW(SDL_RWFromFile("sample.wav", "rb"), 1, ...); 178 * 179 * If this function succeeds, it returns the given SDL_AudioSpec, 180 * filled with the audio data format of the wave data, and sets 181 * 'audio_buf' to a malloc()'d buffer containing the audio data, 182 * and sets 'audio_len' to the length of that audio buffer, in bytes. 183 * You need to free the audio buffer with SDL_FreeWAV() when you are 184 * done with it. 185 * 186 * This function returns NULL and sets the SDL error message if the 187 * wave file cannot be opened, uses an unknown data format, or is 188 * corrupt. Currently raw and MS-ADPCM WAVE files are supported. 189 */ 190 extern DECLSPEC SDL_AudioSpec * SDLCALL SDL_LoadWAV_RW(SDL_RWops *src, int freesrc, SDL_AudioSpec *spec, Uint8 **audio_buf, Uint32 *audio_len); 191 192 /* Compatibility convenience function -- loads a WAV from a file */ 193 #define SDL_LoadWAV(file, spec, audio_buf, audio_len) \ 194 SDL_LoadWAV_RW(SDL_RWFromFile(file, "rb"),1, spec,audio_buf,audio_len) 195 196 /* 197 * This function frees data previously allocated with SDL_LoadWAV_RW() 198 */ 199 extern DECLSPEC void SDLCALL SDL_FreeWAV(Uint8 *audio_buf); 200 201 /* 202 * This function takes a source format and rate and a destination format 203 * and rate, and initializes the 'cvt' structure with information needed 204 * by SDL_ConvertAudio() to convert a buffer of audio data from one format 205 * to the other. 206 * This function returns 0, or -1 if there was an error. 207 */ 208 extern DECLSPEC int SDLCALL SDL_BuildAudioCVT(SDL_AudioCVT *cvt, 209 Uint16 src_format, Uint8 src_channels, int src_rate, 210 Uint16 dst_format, Uint8 dst_channels, int dst_rate); 211 212 /* Once you have initialized the 'cvt' structure using SDL_BuildAudioCVT(), 213 * created an audio buffer cvt->buf, and filled it with cvt->len bytes of 214 * audio data in the source format, this function will convert it in-place 215 * to the desired format. 216 * The data conversion may expand the size of the audio data, so the buffer 217 * cvt->buf should be allocated after the cvt structure is initialized by 218 * SDL_BuildAudioCVT(), and should be cvt->len*cvt->len_mult bytes long. 219 */ 220 extern DECLSPEC int SDLCALL SDL_ConvertAudio(SDL_AudioCVT *cvt); 221 222 /* 223 * This takes two audio buffers of the playing audio format and mixes 224 * them, performing addition, volume adjustment, and overflow clipping. 225 * The volume ranges from 0 - 128, and should be set to SDL_MIX_MAXVOLUME 226 * for full audio volume. Note this does not change hardware volume. 227 * This is provided for convenience -- you can mix your own audio data. 228 */ 229 #define SDL_MIX_MAXVOLUME 128 230 extern DECLSPEC void SDLCALL SDL_MixAudio(Uint8 *dst, const Uint8 *src, Uint32 len, int volume); 231 232 /* 233 * The lock manipulated by these functions protects the callback function. 234 * During a LockAudio/UnlockAudio pair, you can be guaranteed that the 235 * callback function is not running. Do not call these from the callback 236 * function or you will cause deadlock. 237 */ 238 extern DECLSPEC void SDLCALL SDL_LockAudio(void); 239 extern DECLSPEC void SDLCALL SDL_UnlockAudio(void); 240 241 /* 242 * This function shuts down audio processing and closes the audio device. 243 */ 244 extern DECLSPEC void SDLCALL SDL_CloseAudio(void); 245 246 247 /* Ends C function definitions when using C++ */ 248 #ifdef __cplusplus 249 } 250 #endif 251 #include "close_code.h" 252 253 #endif /* _SDL_audio_h */ 254
