1 /* 2 * Copyright (C) 1999, 2000 Ralf Baechle 3 * Copyright (C) 1999, 2000 Silicon Graphics, Inc. 4 */ 5 #ifndef _IOC3_H 6 #define _IOC3_H 7 8 #include <linux/types.h> 9 10 /* SUPERIO uart register map */ 11 typedef volatile struct ioc3_uartregs { 12 union { 13 volatile u8 rbr; /* read only, DLAB == 0 */ 14 volatile u8 thr; /* write only, DLAB == 0 */ 15 volatile u8 dll; /* DLAB == 1 */ 16 } u1; 17 union { 18 volatile u8 ier; /* DLAB == 0 */ 19 volatile u8 dlm; /* DLAB == 1 */ 20 } u2; 21 union { 22 volatile u8 iir; /* read only */ 23 volatile u8 fcr; /* write only */ 24 } u3; 25 volatile u8 iu_lcr; 26 volatile u8 iu_mcr; 27 volatile u8 iu_lsr; 28 volatile u8 iu_msr; 29 volatile u8 iu_scr; 30 } ioc3_uregs_t; 31 32 #define iu_rbr u1.rbr 33 #define iu_thr u1.thr 34 #define iu_dll u1.dll 35 #define iu_ier u2.ier 36 #define iu_dlm u2.dlm 37 #define iu_iir u3.iir 38 #define iu_fcr u3.fcr 39 40 struct ioc3_sioregs { 41 volatile u8 fill[0x141]; /* starts at 0x141 */ 42 43 volatile u8 uartc; 44 volatile u8 kbdcg; 45 46 volatile u8 fill0[0x150 - 0x142 - 1]; 47 48 volatile u8 pp_data; 49 volatile u8 pp_dsr; 50 volatile u8 pp_dcr; 51 52 volatile u8 fill1[0x158 - 0x152 - 1]; 53 54 volatile u8 pp_fifa; 55 volatile u8 pp_cfgb; 56 volatile u8 pp_ecr; 57 58 volatile u8 fill2[0x168 - 0x15a - 1]; 59 60 volatile u8 rtcad; 61 volatile u8 rtcdat; 62 63 volatile u8 fill3[0x170 - 0x169 - 1]; 64 65 struct ioc3_uartregs uartb; /* 0x20170 */ 66 struct ioc3_uartregs uarta; /* 0x20178 */ 67 }; 68 69 /* Register layout of IOC3 in configuration space. */ 70 struct ioc3 { 71 volatile u32 pad0[7]; /* 0x00000 */ 72 volatile u32 sio_ir; /* 0x0001c */ 73 volatile u32 sio_ies; /* 0x00020 */ 74 volatile u32 sio_iec; /* 0x00024 */ 75 volatile u32 sio_cr; /* 0x00028 */ 76 volatile u32 int_out; /* 0x0002c */ 77 volatile u32 mcr; /* 0x00030 */ 78 79 /* General Purpose I/O registers */ 80 volatile u32 gpcr_s; /* 0x00034 */ 81 volatile u32 gpcr_c; /* 0x00038 */ 82 volatile u32 gpdr; /* 0x0003c */ 83 volatile u32 gppr_0; /* 0x00040 */ 84 volatile u32 gppr_1; /* 0x00044 */ 85 volatile u32 gppr_2; /* 0x00048 */ 86 volatile u32 gppr_3; /* 0x0004c */ 87 volatile u32 gppr_4; /* 0x00050 */ 88 volatile u32 gppr_5; /* 0x00054 */ 89 volatile u32 gppr_6; /* 0x00058 */ 90 volatile u32 gppr_7; /* 0x0005c */ 91 volatile u32 gppr_8; /* 0x00060 */ 92 volatile u32 gppr_9; /* 0x00064 */ 93 volatile u32 gppr_10; /* 0x00068 */ 94 volatile u32 gppr_11; /* 0x0006c */ 95 volatile u32 gppr_12; /* 0x00070 */ 96 volatile u32 gppr_13; /* 0x00074 */ 97 volatile u32 gppr_14; /* 0x00078 */ 98 volatile u32 gppr_15; /* 0x0007c */ 99 100 /* Parallel Port Registers */ 101 volatile u32 ppbr_h_a; /* 0x00080 */ 102 volatile u32 ppbr_l_a; /* 0x00084 */ 103 volatile u32 ppcr_a; /* 0x00088 */ 104 volatile u32 ppcr; /* 0x0008c */ 105 volatile u32 ppbr_h_b; /* 0x00090 */ 106 volatile u32 ppbr_l_b; /* 0x00094 */ 107 volatile u32 ppcr_b; /* 0x00098 */ 108 109 /* Keyboard and Mouse Registers */ 110 volatile u32 km_csr; /* 0x0009c */ 111 volatile u32 k_rd; /* 0x000a0 */ 112 volatile u32 m_rd; /* 0x000a4 */ 113 volatile u32 k_wd; /* 0x000a8 */ 114 volatile u32 m_wd; /* 0x000ac */ 115 116 /* Serial Port Registers */ 117 volatile u32 sbbr_h; /* 0x000b0 */ 118 volatile u32 sbbr_l; /* 0x000b4 */ 119 volatile u32 sscr_a; /* 0x000b8 */ 120 volatile u32 stpir_a; /* 0x000bc */ 121 volatile u32 stcir_a; /* 0x000c0 */ 122 volatile u32 srpir_a; /* 0x000c4 */ 123 volatile u32 srcir_a; /* 0x000c8 */ 124 volatile u32 srtr_a; /* 0x000cc */ 125 volatile u32 shadow_a; /* 0x000d0 */ 126 volatile u32 sscr_b; /* 0x000d4 */ 127 volatile u32 stpir_b; /* 0x000d8 */ 128 volatile u32 stcir_b; /* 0x000dc */ 129 volatile u32 srpir_b; /* 0x000e0 */ 130 volatile u32 srcir_b; /* 0x000e4 */ 131 volatile u32 srtr_b; /* 0x000e8 */ 132 volatile u32 shadow_b; /* 0x000ec */ 133 134 /* Ethernet Registers */ 135 volatile u32 emcr; /* 0x000f0 */ 136 volatile u32 eisr; /* 0x000f4 */ 137 volatile u32 eier; /* 0x000f8 */ 138 volatile u32 ercsr; /* 0x000fc */ 139 volatile u32 erbr_h; /* 0x00100 */ 140 volatile u32 erbr_l; /* 0x00104 */ 141 volatile u32 erbar; /* 0x00108 */ 142 volatile u32 ercir; /* 0x0010c */ 143 volatile u32 erpir; /* 0x00110 */ 144 volatile u32 ertr; /* 0x00114 */ 145 volatile u32 etcsr; /* 0x00118 */ 146 volatile u32 ersr; /* 0x0011c */ 147 volatile u32 etcdc; /* 0x00120 */ 148 volatile u32 ebir; /* 0x00124 */ 149 volatile u32 etbr_h; /* 0x00128 */ 150 volatile u32 etbr_l; /* 0x0012c */ 151 volatile u32 etcir; /* 0x00130 */ 152 volatile u32 etpir; /* 0x00134 */ 153 volatile u32 emar_h; /* 0x00138 */ 154 volatile u32 emar_l; /* 0x0013c */ 155 volatile u32 ehar_h; /* 0x00140 */ 156 volatile u32 ehar_l; /* 0x00144 */ 157 volatile u32 micr; /* 0x00148 */ 158 volatile u32 midr_r; /* 0x0014c */ 159 volatile u32 midr_w; /* 0x00150 */ 160 volatile u32 pad1[(0x20000 - 0x00154) / 4]; 161 162 /* SuperIO Registers XXX */ 163 struct ioc3_sioregs sregs; /* 0x20000 */ 164 volatile u32 pad2[(0x40000 - 0x20180) / 4]; 165 166 /* SSRAM Diagnostic Access */ 167 volatile u32 ssram[(0x80000 - 0x40000) / 4]; 168 169 /* Bytebus device offsets 170 0x80000 - Access to the generic devices selected with DEV0 171 0x9FFFF bytebus DEV_SEL_0 172 0xA0000 - Access to the generic devices selected with DEV1 173 0xBFFFF bytebus DEV_SEL_1 174 0xC0000 - Access to the generic devices selected with DEV2 175 0xDFFFF bytebus DEV_SEL_2 176 0xE0000 - Access to the generic devices selected with DEV3 177 0xFFFFF bytebus DEV_SEL_3 */ 178 }; 179 180 /* 181 * Ethernet RX Buffer 182 */ 183 struct ioc3_erxbuf { 184 u32 w0; /* first word (valid,bcnt,cksum) */ 185 u32 err; /* second word various errors */ 186 /* next comes n bytes of padding */ 187 /* then the received ethernet frame itself */ 188 }; 189 190 #define ERXBUF_IPCKSUM_MASK 0x0000ffff 191 #define ERXBUF_BYTECNT_MASK 0x07ff0000 192 #define ERXBUF_BYTECNT_SHIFT 16 193 #define ERXBUF_V 0x80000000 194 195 #define ERXBUF_CRCERR 0x00000001 /* aka RSV15 */ 196 #define ERXBUF_FRAMERR 0x00000002 /* aka RSV14 */ 197 #define ERXBUF_CODERR 0x00000004 /* aka RSV13 */ 198 #define ERXBUF_INVPREAMB 0x00000008 /* aka RSV18 */ 199 #define ERXBUF_LOLEN 0x00007000 /* aka RSV2_0 */ 200 #define ERXBUF_HILEN 0x03ff0000 /* aka RSV12_3 */ 201 #define ERXBUF_MULTICAST 0x04000000 /* aka RSV16 */ 202 #define ERXBUF_BROADCAST 0x08000000 /* aka RSV17 */ 203 #define ERXBUF_LONGEVENT 0x10000000 /* aka RSV19 */ 204 #define ERXBUF_BADPKT 0x20000000 /* aka RSV20 */ 205 #define ERXBUF_GOODPKT 0x40000000 /* aka RSV21 */ 206 #define ERXBUF_CARRIER 0x80000000 /* aka RSV22 */ 207 208 /* 209 * Ethernet TX Descriptor 210 */ 211 #define ETXD_DATALEN 104 212 struct ioc3_etxd { 213 u32 cmd; /* command field */ 214 u32 bufcnt; /* buffer counts field */ 215 u64 p1; /* buffer pointer 1 */ 216 u64 p2; /* buffer pointer 2 */ 217 u8 data[ETXD_DATALEN]; /* opt. tx data */ 218 }; 219 220 #define ETXD_BYTECNT_MASK 0x000007ff /* total byte count */ 221 #define ETXD_INTWHENDONE 0x00001000 /* intr when done */ 222 #define ETXD_D0V 0x00010000 /* data 0 valid */ 223 #define ETXD_B1V 0x00020000 /* buf 1 valid */ 224 #define ETXD_B2V 0x00040000 /* buf 2 valid */ 225 #define ETXD_DOCHECKSUM 0x00080000 /* insert ip cksum */ 226 #define ETXD_CHKOFF_MASK 0x07f00000 /* cksum byte offset */ 227 #define ETXD_CHKOFF_SHIFT 20 228 229 #define ETXD_D0CNT_MASK 0x0000007f 230 #define ETXD_B1CNT_MASK 0x0007ff00 231 #define ETXD_B1CNT_SHIFT 8 232 #define ETXD_B2CNT_MASK 0x7ff00000 233 #define ETXD_B2CNT_SHIFT 20 234 235 /* 236 * Bytebus device space 237 */ 238 #define IOC3_BYTEBUS_DEV0 0x80000L 239 #define IOC3_BYTEBUS_DEV1 0xa0000L 240 #define IOC3_BYTEBUS_DEV2 0xc0000L 241 #define IOC3_BYTEBUS_DEV3 0xe0000L 242 243 /* ------------------------------------------------------------------------- */ 244 245 /* Superio Registers (PIO Access) */ 246 #define IOC3_SIO_BASE 0x20000 247 #define IOC3_SIO_UARTC (IOC3_SIO_BASE+0x141) /* UART Config */ 248 #define IOC3_SIO_KBDCG (IOC3_SIO_BASE+0x142) /* KBD Config */ 249 #define IOC3_SIO_PP_BASE (IOC3_SIO_BASE+PP_BASE) /* Parallel Port */ 250 #define IOC3_SIO_RTC_BASE (IOC3_SIO_BASE+0x168) /* Real Time Clock */ 251 #define IOC3_SIO_UB_BASE (IOC3_SIO_BASE+UARTB_BASE) /* UART B */ 252 #define IOC3_SIO_UA_BASE (IOC3_SIO_BASE+UARTA_BASE) /* UART A */ 253 254 /* SSRAM Diagnostic Access */ 255 #define IOC3_SSRAM IOC3_RAM_OFF /* base of SSRAM diagnostic access */ 256 #define IOC3_SSRAM_LEN 0x40000 /* 256kb (address space size, may not be fully populated) */ 257 #define IOC3_SSRAM_DM 0x0000ffff /* data mask */ 258 #define IOC3_SSRAM_PM 0x00010000 /* parity mask */ 259 260 /* bitmasks for PCI_SCR */ 261 #define PCI_SCR_PAR_RESP_EN 0x00000040 /* enb PCI parity checking */ 262 #define PCI_SCR_SERR_EN 0x00000100 /* enable the SERR# driver */ 263 #define PCI_SCR_DROP_MODE_EN 0x00008000 /* drop pios on parity err */ 264 #define PCI_SCR_RX_SERR (0x1 << 16) 265 #define PCI_SCR_DROP_MODE (0x1 << 17) 266 #define PCI_SCR_SIG_PAR_ERR (0x1 << 24) 267 #define PCI_SCR_SIG_TAR_ABRT (0x1 << 27) 268 #define PCI_SCR_RX_TAR_ABRT (0x1 << 28) 269 #define PCI_SCR_SIG_MST_ABRT (0x1 << 29) 270 #define PCI_SCR_SIG_SERR (0x1 << 30) 271 #define PCI_SCR_PAR_ERR (0x1 << 31) 272 273 /* bitmasks for IOC3_KM_CSR */ 274 #define KM_CSR_K_WRT_PEND 0x00000001 /* kbd port xmitting or resetting */ 275 #define KM_CSR_M_WRT_PEND 0x00000002 /* mouse port xmitting or resetting */ 276 #define KM_CSR_K_LCB 0x00000004 /* Line Cntrl Bit for last KBD write */ 277 #define KM_CSR_M_LCB 0x00000008 /* same for mouse */ 278 #define KM_CSR_K_DATA 0x00000010 /* state of kbd data line */ 279 #define KM_CSR_K_CLK 0x00000020 /* state of kbd clock line */ 280 #define KM_CSR_K_PULL_DATA 0x00000040 /* pull kbd data line low */ 281 #define KM_CSR_K_PULL_CLK 0x00000080 /* pull kbd clock line low */ 282 #define KM_CSR_M_DATA 0x00000100 /* state of ms data line */ 283 #define KM_CSR_M_CLK 0x00000200 /* state of ms clock line */ 284 #define KM_CSR_M_PULL_DATA 0x00000400 /* pull ms data line low */ 285 #define KM_CSR_M_PULL_CLK 0x00000800 /* pull ms clock line low */ 286 #define KM_CSR_EMM_MODE 0x00001000 /* emulation mode */ 287 #define KM_CSR_SIM_MODE 0x00002000 /* clock X8 */ 288 #define KM_CSR_K_SM_IDLE 0x00004000 /* Keyboard is idle */ 289 #define KM_CSR_M_SM_IDLE 0x00008000 /* Mouse is idle */ 290 #define KM_CSR_K_TO 0x00010000 /* Keyboard trying to send/receive */ 291 #define KM_CSR_M_TO 0x00020000 /* Mouse trying to send/receive */ 292 #define KM_CSR_K_TO_EN 0x00040000 /* KM_CSR_K_TO + KM_CSR_K_TO_EN = cause 293 SIO_IR to assert */ 294 #define KM_CSR_M_TO_EN 0x00080000 /* KM_CSR_M_TO + KM_CSR_M_TO_EN = cause 295 SIO_IR to assert */ 296 #define KM_CSR_K_CLAMP_ONE 0x00100000 /* Pull K_CLK low after rec. one char */ 297 #define KM_CSR_M_CLAMP_ONE 0x00200000 /* Pull M_CLK low after rec. one char */ 298 #define KM_CSR_K_CLAMP_THREE 0x00400000 /* Pull K_CLK low after rec. three chars */ 299 #define KM_CSR_M_CLAMP_THREE 0x00800000 /* Pull M_CLK low after rec. three char */ 300 301 /* bitmasks for IOC3_K_RD and IOC3_M_RD */ 302 #define KM_RD_DATA_2 0x000000ff /* 3rd char recvd since last read */ 303 #define KM_RD_DATA_2_SHIFT 0 304 #define KM_RD_DATA_1 0x0000ff00 /* 2nd char recvd since last read */ 305 #define KM_RD_DATA_1_SHIFT 8 306 #define KM_RD_DATA_0 0x00ff0000 /* 1st char recvd since last read */ 307 #define KM_RD_DATA_0_SHIFT 16 308 #define KM_RD_FRAME_ERR_2 0x01000000 /* framing or parity error in byte 2 */ 309 #define KM_RD_FRAME_ERR_1 0x02000000 /* same for byte 1 */ 310 #define KM_RD_FRAME_ERR_0 0x04000000 /* same for byte 0 */ 311 312 #define KM_RD_KBD_MSE 0x08000000 /* 0 if from kbd, 1 if from mouse */ 313 #define KM_RD_OFLO 0x10000000 /* 4th char recvd before this read */ 314 #define KM_RD_VALID_2 0x20000000 /* DATA_2 valid */ 315 #define KM_RD_VALID_1 0x40000000 /* DATA_1 valid */ 316 #define KM_RD_VALID_0 0x80000000 /* DATA_0 valid */ 317 #define KM_RD_VALID_ALL (KM_RD_VALID_0|KM_RD_VALID_1|KM_RD_VALID_2) 318 319 /* bitmasks for IOC3_K_WD & IOC3_M_WD */ 320 #define KM_WD_WRT_DATA 0x000000ff /* write to keyboard/mouse port */ 321 #define KM_WD_WRT_DATA_SHIFT 0 322 323 /* bitmasks for serial RX status byte */ 324 #define RXSB_OVERRUN 0x01 /* char(s) lost */ 325 #define RXSB_PAR_ERR 0x02 /* parity error */ 326 #define RXSB_FRAME_ERR 0x04 /* framing error */ 327 #define RXSB_BREAK 0x08 /* break character */ 328 #define RXSB_CTS 0x10 /* state of CTS */ 329 #define RXSB_DCD 0x20 /* state of DCD */ 330 #define RXSB_MODEM_VALID 0x40 /* DCD, CTS and OVERRUN are valid */ 331 #define RXSB_DATA_VALID 0x80 /* data byte, FRAME_ERR PAR_ERR & BREAK valid */ 332 333 /* bitmasks for serial TX control byte */ 334 #define TXCB_INT_WHEN_DONE 0x20 /* interrupt after this byte is sent */ 335 #define TXCB_INVALID 0x00 /* byte is invalid */ 336 #define TXCB_VALID 0x40 /* byte is valid */ 337 #define TXCB_MCR 0x80 /* data<7:0> to modem control register */ 338 #define TXCB_DELAY 0xc0 /* delay data<7:0> mSec */ 339 340 /* bitmasks for IOC3_SBBR_L */ 341 #define SBBR_L_SIZE 0x00000001 /* 0 == 1KB rings, 1 == 4KB rings */ 342 #define SBBR_L_BASE 0xfffff000 /* lower serial ring base addr */ 343 344 /* bitmasks for IOC3_SSCR_<A:B> */ 345 #define SSCR_RX_THRESHOLD 0x000001ff /* hiwater mark */ 346 #define SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */ 347 #define SSCR_HFC_EN 0x00020000 /* hardware flow control enabled */ 348 #define SSCR_RX_RING_DCD 0x00040000 /* post RX record on delta-DCD */ 349 #define SSCR_RX_RING_CTS 0x00080000 /* post RX record on delta-CTS */ 350 #define SSCR_HIGH_SPD 0x00100000 /* 4X speed */ 351 #define SSCR_DIAG 0x00200000 /* bypass clock divider for sim */ 352 #define SSCR_RX_DRAIN 0x08000000 /* drain RX buffer to memory */ 353 #define SSCR_DMA_EN 0x10000000 /* enable ring buffer DMA */ 354 #define SSCR_DMA_PAUSE 0x20000000 /* pause DMA */ 355 #define SSCR_PAUSE_STATE 0x40000000 /* sets when PAUSE takes effect */ 356 #define SSCR_RESET 0x80000000 /* reset DMA channels */ 357 358 /* all producer/comsumer pointers are the same bitfield */ 359 #define PROD_CONS_PTR_4K 0x00000ff8 /* for 4K buffers */ 360 #define PROD_CONS_PTR_1K 0x000003f8 /* for 1K buffers */ 361 #define PROD_CONS_PTR_OFF 3 362 363 /* bitmasks for IOC3_SRCIR_<A:B> */ 364 #define SRCIR_ARM 0x80000000 /* arm RX timer */ 365 366 /* bitmasks for IOC3_SRPIR_<A:B> */ 367 #define SRPIR_BYTE_CNT 0x07000000 /* bytes in packer */ 368 #define SRPIR_BYTE_CNT_SHIFT 24 369 370 /* bitmasks for IOC3_STCIR_<A:B> */ 371 #define STCIR_BYTE_CNT 0x0f000000 /* bytes in unpacker */ 372 #define STCIR_BYTE_CNT_SHIFT 24 373 374 /* bitmasks for IOC3_SHADOW_<A:B> */ 375 #define SHADOW_DR 0x00000001 /* data ready */ 376 #define SHADOW_OE 0x00000002 /* overrun error */ 377 #define SHADOW_PE 0x00000004 /* parity error */ 378 #define SHADOW_FE 0x00000008 /* framing error */ 379 #define SHADOW_BI 0x00000010 /* break interrupt */ 380 #define SHADOW_THRE 0x00000020 /* transmit holding register empty */ 381 #define SHADOW_TEMT 0x00000040 /* transmit shift register empty */ 382 #define SHADOW_RFCE 0x00000080 /* char in RX fifo has an error */ 383 #define SHADOW_DCTS 0x00010000 /* delta clear to send */ 384 #define SHADOW_DDCD 0x00080000 /* delta data carrier detect */ 385 #define SHADOW_CTS 0x00100000 /* clear to send */ 386 #define SHADOW_DCD 0x00800000 /* data carrier detect */ 387 #define SHADOW_DTR 0x01000000 /* data terminal ready */ 388 #define SHADOW_RTS 0x02000000 /* request to send */ 389 #define SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */ 390 #define SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */ 391 #define SHADOW_LOOP 0x10000000 /* loopback enabled */ 392 393 /* bitmasks for IOC3_SRTR_<A:B> */ 394 #define SRTR_CNT 0x00000fff /* reload value for RX timer */ 395 #define SRTR_CNT_VAL 0x0fff0000 /* current value of RX timer */ 396 #define SRTR_CNT_VAL_SHIFT 16 397 #define SRTR_HZ 16000 /* SRTR clock frequency */ 398 399 /* bitmasks for IOC3_SIO_IR, IOC3_SIO_IEC and IOC3_SIO_IES */ 400 #define SIO_IR_SA_TX_MT 0x00000001 /* Serial port A TX empty */ 401 #define SIO_IR_SA_RX_FULL 0x00000002 /* port A RX buf full */ 402 #define SIO_IR_SA_RX_HIGH 0x00000004 /* port A RX hiwat */ 403 #define SIO_IR_SA_RX_TIMER 0x00000008 /* port A RX timeout */ 404 #define SIO_IR_SA_DELTA_DCD 0x00000010 /* port A delta DCD */ 405 #define SIO_IR_SA_DELTA_CTS 0x00000020 /* port A delta CTS */ 406 #define SIO_IR_SA_INT 0x00000040 /* port A pass-thru intr */ 407 #define SIO_IR_SA_TX_EXPLICIT 0x00000080 /* port A explicit TX thru */ 408 #define SIO_IR_SA_MEMERR 0x00000100 /* port A PCI error */ 409 #define SIO_IR_SB_TX_MT 0x00000200 /* */ 410 #define SIO_IR_SB_RX_FULL 0x00000400 /* */ 411 #define SIO_IR_SB_RX_HIGH 0x00000800 /* */ 412 #define SIO_IR_SB_RX_TIMER 0x00001000 /* */ 413 #define SIO_IR_SB_DELTA_DCD 0x00002000 /* */ 414 #define SIO_IR_SB_DELTA_CTS 0x00004000 /* */ 415 #define SIO_IR_SB_INT 0x00008000 /* */ 416 #define SIO_IR_SB_TX_EXPLICIT 0x00010000 /* */ 417 #define SIO_IR_SB_MEMERR 0x00020000 /* */ 418 #define SIO_IR_PP_INT 0x00040000 /* P port pass-thru intr */ 419 #define SIO_IR_PP_INTA 0x00080000 /* PP context A thru */ 420 #define SIO_IR_PP_INTB 0x00100000 /* PP context B thru */ 421 #define SIO_IR_PP_MEMERR 0x00200000 /* PP PCI error */ 422 #define SIO_IR_KBD_INT 0x00400000 /* kbd/mouse intr */ 423 #define SIO_IR_RT_INT 0x08000000 /* RT output pulse */ 424 #define SIO_IR_GEN_INT1 0x10000000 /* RT input pulse */ 425 #define SIO_IR_GEN_INT_SHIFT 28 426 427 /* per device interrupt masks */ 428 #define SIO_IR_SA (SIO_IR_SA_TX_MT | SIO_IR_SA_RX_FULL | \ 429 SIO_IR_SA_RX_HIGH | SIO_IR_SA_RX_TIMER | \ 430 SIO_IR_SA_DELTA_DCD | SIO_IR_SA_DELTA_CTS | \ 431 SIO_IR_SA_INT | SIO_IR_SA_TX_EXPLICIT | \ 432 SIO_IR_SA_MEMERR) 433 #define SIO_IR_SB (SIO_IR_SB_TX_MT | SIO_IR_SB_RX_FULL | \ 434 SIO_IR_SB_RX_HIGH | SIO_IR_SB_RX_TIMER | \ 435 SIO_IR_SB_DELTA_DCD | SIO_IR_SB_DELTA_CTS | \ 436 SIO_IR_SB_INT | SIO_IR_SB_TX_EXPLICIT | \ 437 SIO_IR_SB_MEMERR) 438 #define SIO_IR_PP (SIO_IR_PP_INT | SIO_IR_PP_INTA | \ 439 SIO_IR_PP_INTB | SIO_IR_PP_MEMERR) 440 #define SIO_IR_RT (SIO_IR_RT_INT | SIO_IR_GEN_INT1) 441 442 /* macro to load pending interrupts */ 443 #define IOC3_PENDING_INTRS(mem) (PCI_INW(&((mem)->sio_ir)) & \ 444 PCI_INW(&((mem)->sio_ies_ro))) 445 446 /* bitmasks for SIO_CR */ 447 #define SIO_CR_SIO_RESET 0x00000001 /* reset the SIO */ 448 #define SIO_CR_SER_A_BASE 0x000000fe /* DMA poll addr port A */ 449 #define SIO_CR_SER_A_BASE_SHIFT 1 450 #define SIO_CR_SER_B_BASE 0x00007f00 /* DMA poll addr port B */ 451 #define SIO_CR_SER_B_BASE_SHIFT 8 452 #define SIO_SR_CMD_PULSE 0x00078000 /* byte bus strobe length */ 453 #define SIO_CR_CMD_PULSE_SHIFT 15 454 #define SIO_CR_ARB_DIAG 0x00380000 /* cur !enet PCI requet (ro) */ 455 #define SIO_CR_ARB_DIAG_TXA 0x00000000 456 #define SIO_CR_ARB_DIAG_RXA 0x00080000 457 #define SIO_CR_ARB_DIAG_TXB 0x00100000 458 #define SIO_CR_ARB_DIAG_RXB 0x00180000 459 #define SIO_CR_ARB_DIAG_PP 0x00200000 460 #define SIO_CR_ARB_DIAG_IDLE 0x00400000 /* 0 -> active request (ro) */ 461 462 /* bitmasks for INT_OUT */ 463 #define INT_OUT_COUNT 0x0000ffff /* pulse interval timer */ 464 #define INT_OUT_MODE 0x00070000 /* mode mask */ 465 #define INT_OUT_MODE_0 0x00000000 /* set output to 0 */ 466 #define INT_OUT_MODE_1 0x00040000 /* set output to 1 */ 467 #define INT_OUT_MODE_1PULSE 0x00050000 /* send 1 pulse */ 468 #define INT_OUT_MODE_PULSES 0x00060000 /* send 1 pulse every interval */ 469 #define INT_OUT_MODE_SQW 0x00070000 /* toggle output every interval */ 470 #define INT_OUT_DIAG 0x40000000 /* diag mode */ 471 #define INT_OUT_INT_OUT 0x80000000 /* current state of INT_OUT */ 472 473 /* time constants for INT_OUT */ 474 #define INT_OUT_NS_PER_TICK (30 * 260) /* 30 ns PCI clock, divisor=260 */ 475 #define INT_OUT_TICKS_PER_PULSE 3 /* outgoing pulse lasts 3 ticks */ 476 #define INT_OUT_US_TO_COUNT(x) /* convert uS to a count value */ \ 477 (((x) * 10 + INT_OUT_NS_PER_TICK / 200) * \ 478 100 / INT_OUT_NS_PER_TICK - 1) 479 #define INT_OUT_COUNT_TO_US(x) /* convert count value to uS */ \ 480 (((x) + 1) * INT_OUT_NS_PER_TICK / 1000) 481 #define INT_OUT_MIN_TICKS 3 /* min period is width of pulse in "ticks" */ 482 #define INT_OUT_MAX_TICKS INT_OUT_COUNT /* largest possible count */ 483 484 /* bitmasks for GPCR */ 485 #define GPCR_DIR 0x000000ff /* tristate pin input or output */ 486 #define GPCR_DIR_PIN(x) (1<<(x)) /* access one of the DIR bits */ 487 #define GPCR_EDGE 0x000f0000 /* extint edge or level sensitive */ 488 #define GPCR_EDGE_PIN(x) (1<<((x)+15)) /* access one of the EDGE bits */ 489 490 /* values for GPCR */ 491 #define GPCR_INT_OUT_EN 0x00100000 /* enable INT_OUT to pin 0 */ 492 #define GPCR_MLAN_EN 0x00200000 /* enable MCR to pin 8 */ 493 #define GPCR_DIR_SERA_XCVR 0x00000080 /* Port A Transceiver select enable */ 494 #define GPCR_DIR_SERB_XCVR 0x00000040 /* Port B Transceiver select enable */ 495 #define GPCR_DIR_PHY_RST 0x00000020 /* ethernet PHY reset enable */ 496 497 /* defs for some of the generic I/O pins */ 498 #define GPCR_PHY_RESET 0x20 /* pin is output to PHY reset */ 499 #define GPCR_UARTB_MODESEL 0x40 /* pin is output to port B mode sel */ 500 #define GPCR_UARTA_MODESEL 0x80 /* pin is output to port A mode sel */ 501 502 #define GPPR_PHY_RESET_PIN 5 /* GIO pin controlling phy reset */ 503 #define GPPR_UARTB_MODESEL_PIN 6 /* GIO pin controlling uart b mode select */ 504 #define GPPR_UARTA_MODESEL_PIN 7 /* GIO pin controlling uart a mode select */ 505 506 #define EMCR_DUPLEX 0x00000001 507 #define EMCR_PROMISC 0x00000002 508 #define EMCR_PADEN 0x00000004 509 #define EMCR_RXOFF_MASK 0x000001f8 510 #define EMCR_RXOFF_SHIFT 3 511 #define EMCR_RAMPAR 0x00000200 512 #define EMCR_BADPAR 0x00000800 513 #define EMCR_BUFSIZ 0x00001000 514 #define EMCR_TXDMAEN 0x00002000 515 #define EMCR_TXEN 0x00004000 516 #define EMCR_RXDMAEN 0x00008000 517 #define EMCR_RXEN 0x00010000 518 #define EMCR_LOOPBACK 0x00020000 519 #define EMCR_ARB_DIAG 0x001c0000 520 #define EMCR_ARB_DIAG_IDLE 0x00200000 521 #define EMCR_RST 0x80000000 522 523 #define EISR_RXTIMERINT 0x00000001 524 #define EISR_RXTHRESHINT 0x00000002 525 #define EISR_RXOFLO 0x00000004 526 #define EISR_RXBUFOFLO 0x00000008 527 #define EISR_RXMEMERR 0x00000010 528 #define EISR_RXPARERR 0x00000020 529 #define EISR_TXEMPTY 0x00010000 530 #define EISR_TXRTRY 0x00020000 531 #define EISR_TXEXDEF 0x00040000 532 #define EISR_TXLCOL 0x00080000 533 #define EISR_TXGIANT 0x00100000 534 #define EISR_TXBUFUFLO 0x00200000 535 #define EISR_TXEXPLICIT 0x00400000 536 #define EISR_TXCOLLWRAP 0x00800000 537 #define EISR_TXDEFERWRAP 0x01000000 538 #define EISR_TXMEMERR 0x02000000 539 #define EISR_TXPARERR 0x04000000 540 541 #define ERCSR_THRESH_MASK 0x000001ff /* enet RX threshold */ 542 #define ERCSR_RX_TMR 0x40000000 /* simulation only */ 543 #define ERCSR_DIAG_OFLO 0x80000000 /* simulation only */ 544 545 #define ERBR_ALIGNMENT 4096 546 #define ERBR_L_RXRINGBASE_MASK 0xfffff000 547 548 #define ERBAR_BARRIER_BIT 0x0100 549 #define ERBAR_RXBARR_MASK 0xffff0000 550 #define ERBAR_RXBARR_SHIFT 16 551 552 #define ERCIR_RXCONSUME_MASK 0x00000fff 553 554 #define ERPIR_RXPRODUCE_MASK 0x00000fff 555 #define ERPIR_ARM 0x80000000 556 557 #define ERTR_CNT_MASK 0x000007ff 558 559 #define ETCSR_IPGT_MASK 0x0000007f 560 #define ETCSR_IPGR1_MASK 0x00007f00 561 #define ETCSR_IPGR1_SHIFT 8 562 #define ETCSR_IPGR2_MASK 0x007f0000 563 #define ETCSR_IPGR2_SHIFT 16 564 #define ETCSR_NOTXCLK 0x80000000 565 566 #define ETCDC_COLLCNT_MASK 0x0000ffff 567 #define ETCDC_DEFERCNT_MASK 0xffff0000 568 #define ETCDC_DEFERCNT_SHIFT 16 569 570 #define ETBR_ALIGNMENT (64*1024) 571 #define ETBR_L_RINGSZ_MASK 0x00000001 572 #define ETBR_L_RINGSZ128 0 573 #define ETBR_L_RINGSZ512 1 574 #define ETBR_L_TXRINGBASE_MASK 0xffffc000 575 576 #define ETCIR_TXCONSUME_MASK 0x0000ffff 577 #define ETCIR_IDLE 0x80000000 578 579 #define ETPIR_TXPRODUCE_MASK 0x0000ffff 580 581 #define EBIR_TXBUFPROD_MASK 0x0000001f 582 #define EBIR_TXBUFCONS_MASK 0x00001f00 583 #define EBIR_TXBUFCONS_SHIFT 8 584 #define EBIR_RXBUFPROD_MASK 0x007fc000 585 #define EBIR_RXBUFPROD_SHIFT 14 586 #define EBIR_RXBUFCONS_MASK 0xff800000 587 #define EBIR_RXBUFCONS_SHIFT 23 588 589 #define MICR_REGADDR_MASK 0x0000001f 590 #define MICR_PHYADDR_MASK 0x000003e0 591 #define MICR_PHYADDR_SHIFT 5 592 #define MICR_READTRIG 0x00000400 593 #define MICR_BUSY 0x00000800 594 595 #define MIDR_DATA_MASK 0x0000ffff 596 597 #define ERXBUF_IPCKSUM_MASK 0x0000ffff 598 #define ERXBUF_BYTECNT_MASK 0x07ff0000 599 #define ERXBUF_BYTECNT_SHIFT 16 600 #define ERXBUF_V 0x80000000 601 602 #define ERXBUF_CRCERR 0x00000001 /* aka RSV15 */ 603 #define ERXBUF_FRAMERR 0x00000002 /* aka RSV14 */ 604 #define ERXBUF_CODERR 0x00000004 /* aka RSV13 */ 605 #define ERXBUF_INVPREAMB 0x00000008 /* aka RSV18 */ 606 #define ERXBUF_LOLEN 0x00007000 /* aka RSV2_0 */ 607 #define ERXBUF_HILEN 0x03ff0000 /* aka RSV12_3 */ 608 #define ERXBUF_MULTICAST 0x04000000 /* aka RSV16 */ 609 #define ERXBUF_BROADCAST 0x08000000 /* aka RSV17 */ 610 #define ERXBUF_LONGEVENT 0x10000000 /* aka RSV19 */ 611 #define ERXBUF_BADPKT 0x20000000 /* aka RSV20 */ 612 #define ERXBUF_GOODPKT 0x40000000 /* aka RSV21 */ 613 #define ERXBUF_CARRIER 0x80000000 /* aka RSV22 */ 614 615 #define ETXD_BYTECNT_MASK 0x000007ff /* total byte count */ 616 #define ETXD_INTWHENDONE 0x00001000 /* intr when done */ 617 #define ETXD_D0V 0x00010000 /* data 0 valid */ 618 #define ETXD_B1V 0x00020000 /* buf 1 valid */ 619 #define ETXD_B2V 0x00040000 /* buf 2 valid */ 620 #define ETXD_DOCHECKSUM 0x00080000 /* insert ip cksum */ 621 #define ETXD_CHKOFF_MASK 0x07f00000 /* cksum byte offset */ 622 #define ETXD_CHKOFF_SHIFT 20 623 624 #define ETXD_D0CNT_MASK 0x0000007f 625 #define ETXD_B1CNT_MASK 0x0007ff00 626 #define ETXD_B1CNT_SHIFT 8 627 #define ETXD_B2CNT_MASK 0x7ff00000 628 #define ETXD_B2CNT_SHIFT 20 629 630 typedef enum ioc3_subdevs_e { 631 ioc3_subdev_ether, 632 ioc3_subdev_generic, 633 ioc3_subdev_nic, 634 ioc3_subdev_kbms, 635 ioc3_subdev_ttya, 636 ioc3_subdev_ttyb, 637 ioc3_subdev_ecpp, 638 ioc3_subdev_rt, 639 ioc3_nsubdevs 640 } ioc3_subdev_t; 641 642 /* subdevice disable bits, 643 * from the standard INFO_LBL_SUBDEVS 644 */ 645 #define IOC3_SDB_ETHER (1<<ioc3_subdev_ether) 646 #define IOC3_SDB_GENERIC (1<<ioc3_subdev_generic) 647 #define IOC3_SDB_NIC (1<<ioc3_subdev_nic) 648 #define IOC3_SDB_KBMS (1<<ioc3_subdev_kbms) 649 #define IOC3_SDB_TTYA (1<<ioc3_subdev_ttya) 650 #define IOC3_SDB_TTYB (1<<ioc3_subdev_ttyb) 651 #define IOC3_SDB_ECPP (1<<ioc3_subdev_ecpp) 652 #define IOC3_SDB_RT (1<<ioc3_subdev_rt) 653 654 #define IOC3_ALL_SUBDEVS ((1<<ioc3_nsubdevs)-1) 655 656 #define IOC3_SDB_SERIAL (IOC3_SDB_TTYA|IOC3_SDB_TTYB) 657 658 #define IOC3_STD_SUBDEVS IOC3_ALL_SUBDEVS 659 660 #define IOC3_INTA_SUBDEVS IOC3_SDB_ETHER 661 #define IOC3_INTB_SUBDEVS (IOC3_SDB_GENERIC|IOC3_SDB_KBMS|IOC3_SDB_SERIAL|IOC3_SDB_ECPP|IOC3_SDB_RT) 662 663 #endif /* _IOC3_H */ 664
