1 /****************************************************************************** 2 * 3 * Copyright (C) 1999-2012 Broadcom Corporation 4 * 5 * Licensed under the Apache License, Version 2.0 (the "License"); 6 * you may not use this file except in compliance with the License. 7 * You may obtain a copy of the License at: 8 * 9 * http://www.apache.org/licenses/LICENSE-2.0 10 * 11 * Unless required by applicable law or agreed to in writing, software 12 * distributed under the License is distributed on an "AS IS" BASIS, 13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 14 * See the License for the specific language governing permissions and 15 * limitations under the License. 16 * 17 ******************************************************************************/ 18 19 #ifndef BT_TYPES_H 20 #define BT_TYPES_H 21 22 #include "data_types.h" 23 24 #ifdef _WIN32 25 #ifdef BLUESTACK_TESTER 26 #include "bte_stack_entry.h" 27 #endif 28 #endif 29 30 /* READ WELL !! 31 ** 32 ** This section defines global events. These are events that cross layers. 33 ** Any event that passes between layers MUST be one of these events. Tasks 34 ** can use their own events internally, but a FUNDAMENTAL design issue is 35 ** that global events MUST be one of these events defined below. 36 ** 37 ** The convention used is the the event name contains the layer that the 38 ** event is going to. 39 */ 40 #define BT_EVT_MASK 0xFF00 41 #define BT_SUB_EVT_MASK 0x00FF 42 /* To Bluetooth Upper Layers */ 43 /************************************/ 44 #define BT_EVT_TO_BTU_L2C_EVT 0x0900 /* L2CAP event */ 45 #define BT_EVT_TO_BTU_HCI_EVT 0x1000 /* HCI Event */ 46 #define BT_EVT_TO_BTU_HCI_BR_EDR_EVT (0x0000 | BT_EVT_TO_BTU_HCI_EVT) /* event from BR/EDR controller */ 47 #define BT_EVT_TO_BTU_HCI_AMP1_EVT (0x0001 | BT_EVT_TO_BTU_HCI_EVT) /* event from local AMP 1 controller */ 48 #define BT_EVT_TO_BTU_HCI_AMP2_EVT (0x0002 | BT_EVT_TO_BTU_HCI_EVT) /* event from local AMP 2 controller */ 49 #define BT_EVT_TO_BTU_HCI_AMP3_EVT (0x0003 | BT_EVT_TO_BTU_HCI_EVT) /* event from local AMP 3 controller */ 50 51 #define BT_EVT_TO_BTU_HCI_ACL 0x1100 /* ACL Data from HCI */ 52 #define BT_EVT_TO_BTU_HCI_SCO 0x1200 /* SCO Data from HCI */ 53 #define BT_EVT_TO_BTU_HCIT_ERR 0x1300 /* HCI Transport Error */ 54 55 #define BT_EVT_TO_BTU_SP_EVT 0x1400 /* Serial Port Event */ 56 #define BT_EVT_TO_BTU_SP_DATA 0x1500 /* Serial Port Data */ 57 58 #define BT_EVT_TO_BTU_HCI_CMD 0x1600 /* HCI command from upper layer */ 59 60 61 #define BT_EVT_TO_BTU_L2C_SEG_XMIT 0x1900 /* L2CAP segment(s) transmitted */ 62 63 #define BT_EVT_PROXY_INCOMING_MSG 0x1A00 /* BlueStackTester event: incoming message from target */ 64 65 #define BT_EVT_BTSIM 0x1B00 /* Insight BTSIM event */ 66 #define BT_EVT_BTISE 0x1C00 /* Insight Script Engine event */ 67 68 /* To LM */ 69 /************************************/ 70 #define BT_EVT_TO_LM_HCI_CMD 0x2000 /* HCI Command */ 71 #define BT_EVT_TO_LM_HCI_ACL 0x2100 /* HCI ACL Data */ 72 #define BT_EVT_TO_LM_HCI_SCO 0x2200 /* HCI SCO Data */ 73 #define BT_EVT_TO_LM_HCIT_ERR 0x2300 /* HCI Transport Error */ 74 #define BT_EVT_TO_LM_LC_EVT 0x2400 /* LC event */ 75 #define BT_EVT_TO_LM_LC_LMP 0x2500 /* LC Received LMP command frame */ 76 #define BT_EVT_TO_LM_LC_ACL 0x2600 /* LC Received ACL data */ 77 #define BT_EVT_TO_LM_LC_SCO 0x2700 /* LC Received SCO data (not used) */ 78 #define BT_EVT_TO_LM_LC_ACL_TX 0x2800 /* LMP data transmit complete */ 79 #define BT_EVT_TO_LM_LC_LMPC_TX 0x2900 /* LMP Command transmit complete */ 80 #define BT_EVT_TO_LM_LOCAL_ACL_LB 0x2a00 /* Data to be locally loopbacked */ 81 #define BT_EVT_TO_LM_HCI_ACL_ACK 0x2b00 /* HCI ACL Data ack (not used) */ 82 #define BT_EVT_TO_LM_DIAG 0x2c00 /* LM Diagnostics commands */ 83 84 85 #define BT_EVT_TO_BTM_CMDS 0x2f00 86 #define BT_EVT_TO_BTM_PM_MDCHG_EVT (0x0001 | BT_EVT_TO_BTM_CMDS) 87 88 #define BT_EVT_TO_TCS_CMDS 0x3000 89 90 #define BT_EVT_TO_OBX_CL_MSG 0x3100 91 #define BT_EVT_TO_OBX_SR_MSG 0x3200 92 93 #define BT_EVT_TO_CTP_CMDS 0x3300 94 95 /* Obex Over L2CAP */ 96 #define BT_EVT_TO_OBX_CL_L2C_MSG 0x3400 97 #define BT_EVT_TO_OBX_SR_L2C_MSG 0x3500 98 99 /* ftp events */ 100 #define BT_EVT_TO_FTP_SRVR_CMDS 0x3600 101 #define BT_EVT_TO_FTP_CLNT_CMDS 0x3700 102 103 #define BT_EVT_TO_BTU_SAP 0x3800 /* SIM Access Profile events */ 104 105 /* opp events */ 106 #define BT_EVT_TO_OPP_SRVR_CMDS 0x3900 107 #define BT_EVT_TO_OPP_CLNT_CMDS 0x3a00 108 109 /* gap events */ 110 #define BT_EVT_TO_GAP_MSG 0x3b00 111 112 /* start timer */ 113 #define BT_EVT_TO_START_TIMER 0x3c00 114 115 /* stop timer */ 116 #define BT_EVT_TO_STOP_TIMER 0x3d00 117 118 /* start quick timer */ 119 #define BT_EVT_TO_START_QUICK_TIMER 0x3e00 120 121 122 /* for NFC */ 123 /************************************/ 124 #define BT_EVT_TO_NFC_NCI 0x4000 /* NCI Command, Notification or Data*/ 125 #define BT_EVT_TO_NFC_NCI_VS 0x4200 /* Vendor specific message */ 126 #define BT_EVT_TO_NFC_MSGS 0x4300 /* messages between NFC and NCI task */ 127 128 #define BT_EVT_TO_NFCCSIM_NCI 0x4a00 /* events to NFCC simulation (NCI packets) */ 129 130 /* HCISU Events */ 131 132 #define BT_EVT_HCISU 0x5000 133 134 #define BT_EVT_TO_HCISU_LP_APP_SLEEPING_EVT (0x0005 | BT_EVT_HCISU) 135 #define BT_EVT_TO_HCISU_LP_ALLOW_BT_SLEEP_EVT (0x0006 | BT_EVT_HCISU) 136 #define BT_EVT_TO_HCISU_LP_WAKEUP_HOST_EVT (0x0007 | BT_EVT_HCISU) 137 #define BT_EVT_TO_HCISU_LP_RCV_H4IBSS_EVT (0x0008 | BT_EVT_HCISU) 138 #define BT_EVT_TO_HCISU_H5_RESET_EVT (0x0009 | BT_EVT_HCISU) 139 #define BT_EVT_HCISU_START_QUICK_TIMER (0x000a | BT_EVT_HCISU) 140 141 #define BT_EVT_DATA_TO_AMP_1 0x5100 142 #define BT_EVT_DATA_TO_AMP_15 0x5f00 143 144 /* HSP Events */ 145 146 #define BT_EVT_BTU_HSP2 0x6000 147 148 #define BT_EVT_TO_BTU_HSP2_EVT (0x0001 | BT_EVT_BTU_HSP2) 149 150 /* BPP Events */ 151 #define BT_EVT_TO_BPP_PR_CMDS 0x6100 /* Printer Events */ 152 #define BT_EVT_TO_BPP_SND_CMDS 0x6200 /* BPP Sender Events */ 153 154 /* BIP Events */ 155 #define BT_EVT_TO_BIP_CMDS 0x6300 156 157 /* HCRP Events */ 158 159 #define BT_EVT_BTU_HCRP 0x7000 160 161 #define BT_EVT_TO_BTU_HCRP_EVT (0x0001 | BT_EVT_BTU_HCRP) 162 #define BT_EVT_TO_BTU_HCRPM_EVT (0x0002 | BT_EVT_BTU_HCRP) 163 164 165 #define BT_EVT_BTU_HFP 0x8000 166 #define BT_EVT_TO_BTU_HFP_EVT (0x0001 | BT_EVT_BTU_HFP) 167 168 #define BT_EVT_BTU_IPC_EVT 0x9000 169 #define BT_EVT_BTU_IPC_LOGMSG_EVT (0x0000 | BT_EVT_BTU_IPC_EVT) 170 #define BT_EVT_BTU_IPC_ACL_EVT (0x0001 | BT_EVT_BTU_IPC_EVT) 171 #define BT_EVT_BTU_IPC_BTU_EVT (0x0002 | BT_EVT_BTU_IPC_EVT) 172 #define BT_EVT_BTU_IPC_L2C_EVT (0x0003 | BT_EVT_BTU_IPC_EVT) 173 #define BT_EVT_BTU_IPC_L2C_MSG_EVT (0x0004 | BT_EVT_BTU_IPC_EVT) 174 #define BT_EVT_BTU_IPC_BTM_EVT (0x0005 | BT_EVT_BTU_IPC_EVT) 175 #define BT_EVT_BTU_IPC_AVDT_EVT (0x0006 | BT_EVT_BTU_IPC_EVT) 176 #define BT_EVT_BTU_IPC_SLIP_EVT (0x0007 | BT_EVT_BTU_IPC_EVT) 177 #define BT_EVT_BTU_IPC_MGMT_EVT (0x0008 | BT_EVT_BTU_IPC_EVT) 178 #define BT_EVT_BTU_IPC_BTTRC_EVT (0x0009 | BT_EVT_BTU_IPC_EVT) 179 #define BT_EVT_BTU_IPC_BURST_EVT (0x000A | BT_EVT_BTU_IPC_EVT) 180 181 /* Define the header of each buffer used in the Bluetooth stack. 182 */ 183 typedef struct 184 { 185 UINT16 event; 186 UINT16 len; 187 UINT16 offset; 188 UINT16 layer_specific; 189 } BT_HDR; 190 191 #define BT_HDR_SIZE (sizeof (BT_HDR)) 192 193 #define BT_PSM_SDP 0x0001 194 #define BT_PSM_RFCOMM 0x0003 195 #define BT_PSM_TCS 0x0005 196 #define BT_PSM_CTP 0x0007 197 #define BT_PSM_BNEP 0x000F 198 #define BT_PSM_HIDC 0x0011 199 #define BT_PSM_HIDI 0x0013 200 #define BT_PSM_UPNP 0x0015 201 #define BT_PSM_AVCTP 0x0017 202 #define BT_PSM_AVDTP 0x0019 203 #define BT_PSM_AVCTP_13 0x001B /* Advanced Control - Browsing */ 204 #define BT_PSM_UDI_CP 0x001D /* Unrestricted Digital Information Profile C-Plane */ 205 #define BT_PSM_ATT 0x001F /* Attribute Protocol */ 206 #define BT_PSM_3DS 0x0021 /* 3D sync */ 207 208 209 /* These macros extract the HCI opcodes from a buffer 210 */ 211 #define HCI_GET_CMD_HDR_OPCODE(p) (UINT16)((*((UINT8 *)((p) + 1) + p->offset) + \ 212 (*((UINT8 *)((p) + 1) + p->offset + 1) << 8))) 213 #define HCI_GET_CMD_HDR_PARAM_LEN(p) (UINT8) (*((UINT8 *)((p) + 1) + p->offset + 2)) 214 215 #define HCI_GET_EVT_HDR_OPCODE(p) (UINT8)(*((UINT8 *)((p) + 1) + p->offset)) 216 #define HCI_GET_EVT_HDR_PARAM_LEN(p) (UINT8) (*((UINT8 *)((p) + 1) + p->offset + 1)) 217 218 219 /******************************************************************************** 220 ** Macros to get and put bytes to and from a stream (Little Endian format). 221 */ 222 #define UINT32_TO_STREAM(p, u32) {*(p)++ = (UINT8)(u32); *(p)++ = (UINT8)((u32) >> 8); *(p)++ = (UINT8)((u32) >> 16); *(p)++ = (UINT8)((u32) >> 24);} 223 #define UINT24_TO_STREAM(p, u24) {*(p)++ = (UINT8)(u24); *(p)++ = (UINT8)((u24) >> 8); *(p)++ = (UINT8)((u24) >> 16);} 224 #define UINT16_TO_STREAM(p, u16) {*(p)++ = (UINT8)(u16); *(p)++ = (UINT8)((u16) >> 8);} 225 #define UINT8_TO_STREAM(p, u8) {*(p)++ = (UINT8)(u8);} 226 #define INT8_TO_STREAM(p, u8) {*(p)++ = (INT8)(u8);} 227 #define ARRAY32_TO_STREAM(p, a) {register int ijk; for (ijk = 0; ijk < 32; ijk++) *(p)++ = (UINT8) a[31 - ijk];} 228 #define ARRAY16_TO_STREAM(p, a) {register int ijk; for (ijk = 0; ijk < 16; ijk++) *(p)++ = (UINT8) a[15 - ijk];} 229 #define ARRAY8_TO_STREAM(p, a) {register int ijk; for (ijk = 0; ijk < 8; ijk++) *(p)++ = (UINT8) a[7 - ijk];} 230 #define BDADDR_TO_STREAM(p, a) {register int ijk; for (ijk = 0; ijk < BD_ADDR_LEN; ijk++) *(p)++ = (UINT8) a[BD_ADDR_LEN - 1 - ijk];} 231 #define LAP_TO_STREAM(p, a) {register int ijk; for (ijk = 0; ijk < LAP_LEN; ijk++) *(p)++ = (UINT8) a[LAP_LEN - 1 - ijk];} 232 #define DEVCLASS_TO_STREAM(p, a) {register int ijk; for (ijk = 0; ijk < DEV_CLASS_LEN;ijk++) *(p)++ = (UINT8) a[DEV_CLASS_LEN - 1 - ijk];} 233 #define ARRAY_TO_STREAM(p, a, len) {register int ijk; for (ijk = 0; ijk < len; ijk++) *(p)++ = (UINT8) a[ijk];} 234 #define REVERSE_ARRAY_TO_STREAM(p, a, len) {register int ijk; for (ijk = 0; ijk < len; ijk++) *(p)++ = (UINT8) a[len - 1 - ijk];} 235 236 #define STREAM_TO_UINT8(u8, p) {u8 = (UINT8)(*(p)); (p) += 1;} 237 #define STREAM_TO_UINT16(u16, p) {u16 = ((UINT16)(*(p)) + (((UINT16)(*((p) + 1))) << 8)); (p) += 2;} 238 #define STREAM_TO_UINT24(u32, p) {u32 = (((UINT32)(*(p))) + ((((UINT32)(*((p) + 1)))) << 8) + ((((UINT32)(*((p) + 2)))) << 16) ); (p) += 3;} 239 #define STREAM_TO_UINT32(u32, p) {u32 = (((UINT32)(*(p))) + ((((UINT32)(*((p) + 1)))) << 8) + ((((UINT32)(*((p) + 2)))) << 16) + ((((UINT32)(*((p) + 3)))) << 24)); (p) += 4;} 240 #define STREAM_TO_BDADDR(a, p) {register int ijk; register UINT8 *pbda = (UINT8 *)a + BD_ADDR_LEN - 1; for (ijk = 0; ijk < BD_ADDR_LEN; ijk++) *pbda-- = *p++;} 241 #define STREAM_TO_ARRAY32(a, p) {register int ijk; register UINT8 *_pa = (UINT8 *)a + 31; for (ijk = 0; ijk < 32; ijk++) *_pa-- = *p++;} 242 #define STREAM_TO_ARRAY16(a, p) {register int ijk; register UINT8 *_pa = (UINT8 *)a + 15; for (ijk = 0; ijk < 16; ijk++) *_pa-- = *p++;} 243 #define STREAM_TO_ARRAY8(a, p) {register int ijk; register UINT8 *_pa = (UINT8 *)a + 7; for (ijk = 0; ijk < 8; ijk++) *_pa-- = *p++;} 244 #define STREAM_TO_DEVCLASS(a, p) {register int ijk; register UINT8 *_pa = (UINT8 *)a + DEV_CLASS_LEN - 1; for (ijk = 0; ijk < DEV_CLASS_LEN; ijk++) *_pa-- = *p++;} 245 #define STREAM_TO_LAP(a, p) {register int ijk; register UINT8 *plap = (UINT8 *)a + LAP_LEN - 1; for (ijk = 0; ijk < LAP_LEN; ijk++) *plap-- = *p++;} 246 #define STREAM_TO_ARRAY(a, p, len) {register int ijk; for (ijk = 0; ijk < len; ijk++) ((UINT8 *) a)[ijk] = *p++;} 247 #define REVERSE_STREAM_TO_ARRAY(a, p, len) {register int ijk; register UINT8 *_pa = (UINT8 *)a + len - 1; for (ijk = 0; ijk < len; ijk++) *_pa-- = *p++;} 248 249 /******************************************************************************** 250 ** Macros to get and put bytes to and from a field (Little Endian format). 251 ** These are the same as to stream, except the pointer is not incremented. 252 */ 253 #define UINT32_TO_FIELD(p, u32) {*(UINT8 *)(p) = (UINT8)(u32); *((UINT8 *)(p)+1) = (UINT8)((u32) >> 8); *((UINT8 *)(p)+2) = (UINT8)((u32) >> 16); *((UINT8 *)(p)+3) = (UINT8)((u32) >> 24);} 254 #define UINT24_TO_FIELD(p, u24) {*(UINT8 *)(p) = (UINT8)(u24); *((UINT8 *)(p)+1) = (UINT8)((u24) >> 8); *((UINT8 *)(p)+2) = (UINT8)((u24) >> 16);} 255 #define UINT16_TO_FIELD(p, u16) {*(UINT8 *)(p) = (UINT8)(u16); *((UINT8 *)(p)+1) = (UINT8)((u16) >> 8);} 256 #define UINT8_TO_FIELD(p, u8) {*(UINT8 *)(p) = (UINT8)(u8);} 257 258 259 /******************************************************************************** 260 ** Macros to get and put bytes to and from a stream (Big Endian format) 261 */ 262 #define UINT32_TO_BE_STREAM(p, u32) {*(p)++ = (UINT8)((u32) >> 24); *(p)++ = (UINT8)((u32) >> 16); *(p)++ = (UINT8)((u32) >> 8); *(p)++ = (UINT8)(u32); } 263 #define UINT24_TO_BE_STREAM(p, u24) {*(p)++ = (UINT8)((u24) >> 16); *(p)++ = (UINT8)((u24) >> 8); *(p)++ = (UINT8)(u24);} 264 #define UINT16_TO_BE_STREAM(p, u16) {*(p)++ = (UINT8)((u16) >> 8); *(p)++ = (UINT8)(u16);} 265 #define UINT8_TO_BE_STREAM(p, u8) {*(p)++ = (UINT8)(u8);} 266 #define ARRAY_TO_BE_STREAM(p, a, len) {register int ijk; for (ijk = 0; ijk < len; ijk++) *(p)++ = (UINT8) a[ijk];} 267 268 #define BE_STREAM_TO_UINT8(u8, p) {u8 = (UINT8)(*(p)); (p) += 1;} 269 #define BE_STREAM_TO_UINT16(u16, p) {u16 = (UINT16)(((UINT16)(*(p)) << 8) + (UINT16)(*((p) + 1))); (p) += 2;} 270 #define BE_STREAM_TO_UINT24(u32, p) {u32 = (((UINT32)(*((p) + 2))) + ((UINT32)(*((p) + 1)) << 8) + ((UINT32)(*(p)) << 16)); (p) += 3;} 271 #define BE_STREAM_TO_UINT32(u32, p) {u32 = ((UINT32)(*((p) + 3)) + ((UINT32)(*((p) + 2)) << 8) + ((UINT32)(*((p) + 1)) << 16) + ((UINT32)(*(p)) << 24)); (p) += 4;} 272 #define BE_STREAM_TO_ARRAY(p, a, len) {register int ijk; for (ijk = 0; ijk < len; ijk++) ((UINT8 *) a)[ijk] = *p++;} 273 274 275 /******************************************************************************** 276 ** Macros to get and put bytes to and from a field (Big Endian format). 277 ** These are the same as to stream, except the pointer is not incremented. 278 */ 279 #define UINT32_TO_BE_FIELD(p, u32) {*(UINT8 *)(p) = (UINT8)((u32) >> 24); *((UINT8 *)(p)+1) = (UINT8)((u32) >> 16); *((UINT8 *)(p)+2) = (UINT8)((u32) >> 8); *((UINT8 *)(p)+3) = (UINT8)(u32); } 280 #define UINT24_TO_BE_FIELD(p, u24) {*(UINT8 *)(p) = (UINT8)((u24) >> 16); *((UINT8 *)(p)+1) = (UINT8)((u24) >> 8); *((UINT8 *)(p)+2) = (UINT8)(u24);} 281 #define UINT16_TO_BE_FIELD(p, u16) {*(UINT8 *)(p) = (UINT8)((u16) >> 8); *((UINT8 *)(p)+1) = (UINT8)(u16);} 282 #define UINT8_TO_BE_FIELD(p, u8) {*(UINT8 *)(p) = (UINT8)(u8);} 283 284 285 /* Common Bluetooth field definitions */ 286 #define BD_ADDR_LEN 6 /* Device address length */ 287 typedef UINT8 BD_ADDR[BD_ADDR_LEN]; /* Device address */ 288 typedef UINT8 *BD_ADDR_PTR; /* Pointer to Device Address */ 289 290 #define AMP_KEY_TYPE_GAMP 0 291 #define AMP_KEY_TYPE_WIFI 1 292 #define AMP_KEY_TYPE_UWB 2 293 typedef UINT8 tAMP_KEY_TYPE; 294 295 #define BT_OCTET8_LEN 8 296 typedef UINT8 BT_OCTET8[BT_OCTET8_LEN]; /* octet array: size 16 */ 297 298 #define LINK_KEY_LEN 16 299 typedef UINT8 LINK_KEY[LINK_KEY_LEN]; /* Link Key */ 300 301 #define AMP_LINK_KEY_LEN 32 302 typedef UINT8 AMP_LINK_KEY[AMP_LINK_KEY_LEN]; /* Dedicated AMP and GAMP Link Keys */ 303 304 #define BT_OCTET16_LEN 16 305 typedef UINT8 BT_OCTET16[BT_OCTET16_LEN]; /* octet array: size 16 */ 306 307 #define PIN_CODE_LEN 16 308 typedef UINT8 PIN_CODE[PIN_CODE_LEN]; /* Pin Code (upto 128 bits) MSB is 0 */ 309 typedef UINT8 *PIN_CODE_PTR; /* Pointer to Pin Code */ 310 311 #define DEV_CLASS_LEN 3 312 typedef UINT8 DEV_CLASS[DEV_CLASS_LEN]; /* Device class */ 313 typedef UINT8 *DEV_CLASS_PTR; /* Pointer to Device class */ 314 315 #define EXT_INQ_RESP_LEN 3 316 typedef UINT8 EXT_INQ_RESP[EXT_INQ_RESP_LEN];/* Extended Inquiry Response */ 317 typedef UINT8 *EXT_INQ_RESP_PTR; /* Pointer to Extended Inquiry Response */ 318 319 #define BD_NAME_LEN 248 320 typedef UINT8 BD_NAME[BD_NAME_LEN + 1]; /* Device name */ 321 typedef UINT8 *BD_NAME_PTR; /* Pointer to Device name */ 322 323 #define BD_FEATURES_LEN 8 324 typedef UINT8 BD_FEATURES[BD_FEATURES_LEN]; /* LMP features supported by device */ 325 326 #define BT_EVENT_MASK_LEN 8 327 typedef UINT8 BT_EVENT_MASK[BT_EVENT_MASK_LEN]; /* Event Mask */ 328 329 #define LAP_LEN 3 330 typedef UINT8 LAP[LAP_LEN]; /* IAC as passed to Inquiry (LAP) */ 331 typedef UINT8 INQ_LAP[LAP_LEN]; /* IAC as passed to Inquiry (LAP) */ 332 333 #define RAND_NUM_LEN 16 334 typedef UINT8 RAND_NUM[RAND_NUM_LEN]; 335 336 #define ACO_LEN 12 337 typedef UINT8 ACO[ACO_LEN]; /* Authenticated ciphering offset */ 338 339 #define COF_LEN 12 340 typedef UINT8 COF[COF_LEN]; /* ciphering offset number */ 341 342 typedef struct { 343 UINT8 qos_flags; /* TBD */ 344 UINT8 service_type; /* see below */ 345 UINT32 token_rate; /* bytes/second */ 346 UINT32 token_bucket_size; /* bytes */ 347 UINT32 peak_bandwidth; /* bytes/second */ 348 UINT32 latency; /* microseconds */ 349 UINT32 delay_variation; /* microseconds */ 350 } FLOW_SPEC; 351 352 /* Values for service_type */ 353 #define NO_TRAFFIC 0 354 #define BEST_EFFORT 1 355 #define GUARANTEED 2 356 357 /* Service class of the CoD */ 358 #define SERV_CLASS_NETWORKING (1 << 1) 359 #define SERV_CLASS_RENDERING (1 << 2) 360 #define SERV_CLASS_CAPTURING (1 << 3) 361 #define SERV_CLASS_OBJECT_TRANSFER (1 << 4) 362 #define SERV_CLASS_OBJECT_AUDIO (1 << 5) 363 #define SERV_CLASS_OBJECT_TELEPHONY (1 << 6) 364 #define SERV_CLASS_OBJECT_INFORMATION (1 << 7) 365 366 /* Second byte */ 367 #define SERV_CLASS_LIMITED_DISC_MODE (0x20) 368 369 /* Field size definitions. Note that byte lengths are rounded up. */ 370 #define ACCESS_CODE_BIT_LEN 72 371 #define ACCESS_CODE_BYTE_LEN 9 372 #define SHORTENED_ACCESS_CODE_BIT_LEN 68 373 374 typedef UINT8 ACCESS_CODE[ACCESS_CODE_BYTE_LEN]; 375 376 #define SYNTH_TX 1 /* want synth code to TRANSMIT at this freq */ 377 #define SYNTH_RX 2 /* want synth code to RECEIVE at this freq */ 378 379 #define SYNC_REPS 1 /* repeats of sync word transmitted to start of burst */ 380 381 /* Bluetooth CLK27 */ 382 #define BT_CLK27 (2 << 26) 383 384 /* Bluetooth CLK12 is 1.28 sec */ 385 #define BT_CLK12_TO_MS(x) ((x) * 1280) 386 #define BT_MS_TO_CLK12(x) ((x) / 1280) 387 #define BT_CLK12_TO_SLOTS(x) ((x) << 11) 388 389 /* Bluetooth CLK is 0.625 msec */ 390 #define BT_CLK_TO_MS(x) (((x) * 5 + 3) / 8) 391 #define BT_MS_TO_CLK(x) (((x) * 8 + 2) / 5) 392 393 #define BT_CLK_TO_MICROSECS(x) (((x) * 5000 + 3) / 8) 394 #define BT_MICROSECS_TO_CLK(x) (((x) * 8 + 2499) / 5000) 395 396 /* Maximum UUID size - 16 bytes, and structure to hold any type of UUID. */ 397 #define MAX_UUID_SIZE 16 398 typedef struct 399 { 400 #define LEN_UUID_16 2 401 #define LEN_UUID_32 4 402 #define LEN_UUID_128 16 403 404 UINT16 len; 405 406 union 407 { 408 UINT16 uuid16; 409 UINT32 uuid32; 410 UINT8 uuid128[MAX_UUID_SIZE]; 411 } uu; 412 413 } tBT_UUID; 414 415 #define BT_EIR_FLAGS_TYPE 0x01 416 #define BT_EIR_MORE_16BITS_UUID_TYPE 0x02 417 #define BT_EIR_COMPLETE_16BITS_UUID_TYPE 0x03 418 #define BT_EIR_MORE_32BITS_UUID_TYPE 0x04 419 #define BT_EIR_COMPLETE_32BITS_UUID_TYPE 0x05 420 #define BT_EIR_MORE_128BITS_UUID_TYPE 0x06 421 #define BT_EIR_COMPLETE_128BITS_UUID_TYPE 0x07 422 #define BT_EIR_SHORTENED_LOCAL_NAME_TYPE 0x08 423 #define BT_EIR_COMPLETE_LOCAL_NAME_TYPE 0x09 424 #define BT_EIR_TX_POWER_LEVEL_TYPE 0x0A 425 #define BT_EIR_OOB_BD_ADDR_TYPE 0x0C 426 #define BT_EIR_OOB_COD_TYPE 0x0D 427 #define BT_EIR_OOB_SSP_HASH_C_TYPE 0x0E 428 #define BT_EIR_OOB_SSP_RAND_R_TYPE 0x0F 429 #define BT_EIR_3D_SYNC_TYPE 0x3D 430 #define BT_EIR_MANUFACTURER_SPECIFIC_TYPE 0xFF 431 432 #define BT_OOB_COD_SIZE 3 433 #define BT_OOB_HASH_C_SIZE 16 434 #define BT_OOB_RAND_R_SIZE 16 435 436 /* Broadcom proprietary UUIDs and reserved PSMs 437 ** 438 ** The lowest 4 bytes byte of the UUID or GUID depends on the feature. Typically, 439 ** the value of those bytes will be the PSM or SCN, but it is up to the features. 440 */ 441 #define BRCM_PROPRIETARY_UUID_BASE 0xDA, 0x23, 0x41, 0x02, 0xA3, 0xBB, 0xC1, 0x71, 0xBA, 0x09, 0x6f, 0x21 442 #define BRCM_PROPRIETARY_GUID_BASE 0xda23, 0x4102, 0xa3, 0xbb, 0xc1, 0x71, 0xba, 0x09, 0x6f, 0x21 443 444 /* We will not allocate a PSM in the reserved range to 3rd party apps 445 */ 446 #define BRCM_RESERVED_PSM_START 0x5AE1 447 #define BRCM_RESERVED_PSM_END 0x5AFF 448 449 #define BRCM_UTILITY_SERVICE_PSM 0x5AE1 450 #define BRCM_MATCHER_PSM 0x5AE3 451 452 /* Connection statistics 453 */ 454 455 /* Structure to hold connection stats */ 456 #ifndef BT_CONN_STATS_DEFINED 457 #define BT_CONN_STATS_DEFINED 458 459 /* These bits are used in the bIsConnected field */ 460 #define BT_CONNECTED_USING_BREDR 1 461 #define BT_CONNECTED_USING_AMP 2 462 463 typedef struct 464 { 465 UINT32 is_connected; 466 INT32 rssi; 467 UINT32 bytes_sent; 468 UINT32 bytes_rcvd; 469 UINT32 duration; 470 } tBT_CONN_STATS; 471 472 #endif 473 474 /* AMP transport selection criteria definitions. 475 ** NOTE: if underlying L2CAP connection uses basic mode than it can use only BR/EDR. 476 ** For such L2CAP connections AMP connection the criteria provided by application 477 ** is reset by AMP manager to AMP_USE_AMP_NEVER. 478 */ 479 #define AMP_USE_AMP_NEVER 0 /* Connection only via BR/EDR controller, no AMP allowed */ 480 #define AMP_USE_AMP_IF_PEER_TRIES_IT 1 /* Allow AMP to be used if the peer tries to use it */ 481 #define AMP_USE_AMP_IF_PHY_CONN_EXISTS 2 /* Use AMP if there is already a physical connection (default) */ 482 #define AMP_USE_AMP_IF_LC_POWER_ON 3 /* Only try to use AMP if the Local Controller is powered on */ 483 #define AMP_USE_AMP_IF_LC_AND_PEER_POWER_ON 4 /* Only try to use AMP if both LC and peer are powered on */ 484 #define AMP_USE_AMP_IF_POSSIBLE 5 /* Try to use AMP if at all possible */ 485 #define AMP_USE_AMP_ONLY 6 /* Only use AMP, never use BR/EDR */ 486 #define AMP_USE_AMP_MAX_DEF AMP_USE_AMP_ONLY /* Maximum enum defined for AMP Criteria */ 487 488 #define AMP_AUTOSWITCH_ALLOWED 0x80000000 /* flag to indicate that this connection is auto-switch ready */ 489 #define AMP_USE_CURRENT_CRITERIA 0xFFFFFFFF /* Flag if previous criteria was to be still used */ 490 491 typedef UINT32 tAMP_CRITERIA; 492 493 494 /***************************************************************************** 495 ** Low Energy definitions 496 ** 497 ** Address types 498 */ 499 #define BLE_ADDR_PUBLIC 0x00 500 #define BLE_ADDR_RANDOM 0x01 501 #define BLE_ADDR_TYPE_MASK (BLE_ADDR_RANDOM | BLE_ADDR_PUBLIC) 502 typedef UINT8 tBLE_ADDR_TYPE; 503 504 #define BLE_ADDR_IS_STATIC(x) ((x[0] & 0xC0) == 0xC0) 505 506 typedef struct 507 { 508 tBLE_ADDR_TYPE type; 509 BD_ADDR bda; 510 } tBLE_BD_ADDR; 511 512 /* Device Types 513 */ 514 #define BT_DEVICE_TYPE_BREDR 0x01 515 #define BT_DEVICE_TYPE_BLE 0x02 516 #define BT_DEVICE_TYPE_DUMO 0x03 517 typedef UINT8 tBT_DEVICE_TYPE; 518 /*****************************************************************************/ 519 520 521 /* Define trace levels */ 522 #define BT_TRACE_LEVEL_NONE 0 /* No trace messages to be generated */ 523 #define BT_TRACE_LEVEL_ERROR 1 /* Error condition trace messages */ 524 #define BT_TRACE_LEVEL_WARNING 2 /* Warning condition trace messages */ 525 #define BT_TRACE_LEVEL_API 3 /* API traces */ 526 #define BT_TRACE_LEVEL_EVENT 4 /* Debug messages for events */ 527 #define BT_TRACE_LEVEL_DEBUG 5 /* Full debug messages */ 528 529 #define MAX_TRACE_LEVEL 5 530 531 532 /* Define New Trace Type Definition */ 533 /* TRACE_CTRL_TYPE 0x^^000000*/ 534 #define TRACE_CTRL_MASK 0xff000000 535 #define TRACE_GET_CTRL(x) ((((UINT32)(x)) & TRACE_CTRL_MASK) >> 24) 536 537 #define TRACE_CTRL_GENERAL 0x00000000 538 #define TRACE_CTRL_STR_RESOURCE 0x01000000 539 #define TRACE_CTRL_SEQ_FLOW 0x02000000 540 #define TRACE_CTRL_MAX_NUM 3 541 542 /* LAYER SPECIFIC 0x00^^0000*/ 543 #define TRACE_LAYER_MASK 0x00ff0000 544 #define TRACE_GET_LAYER(x) ((((UINT32)(x)) & TRACE_LAYER_MASK) >> 16) 545 546 #define TRACE_LAYER_NONE 0x00000000 547 #define TRACE_LAYER_USB 0x00010000 548 #define TRACE_LAYER_SERIAL 0x00020000 549 #define TRACE_LAYER_SOCKET 0x00030000 550 #define TRACE_LAYER_RS232 0x00040000 551 #define TRACE_LAYER_TRANS_MAX_NUM 5 552 #define TRACE_LAYER_TRANS_ALL 0x007f0000 553 #define TRACE_LAYER_LC 0x00050000 554 #define TRACE_LAYER_LM 0x00060000 555 #define TRACE_LAYER_HCI 0x00070000 556 #define TRACE_LAYER_L2CAP 0x00080000 557 #define TRACE_LAYER_RFCOMM 0x00090000 558 #define TRACE_LAYER_SDP 0x000a0000 559 #define TRACE_LAYER_TCS 0x000b0000 560 #define TRACE_LAYER_OBEX 0x000c0000 561 #define TRACE_LAYER_BTM 0x000d0000 562 #define TRACE_LAYER_GAP 0x000e0000 563 #define TRACE_LAYER_DUN 0x000f0000 564 #define TRACE_LAYER_GOEP 0x00100000 565 #define TRACE_LAYER_ICP 0x00110000 566 #define TRACE_LAYER_HSP2 0x00120000 567 #define TRACE_LAYER_SPP 0x00130000 568 #define TRACE_LAYER_CTP 0x00140000 569 #define TRACE_LAYER_BPP 0x00150000 570 #define TRACE_LAYER_HCRP 0x00160000 571 #define TRACE_LAYER_FTP 0x00170000 572 #define TRACE_LAYER_OPP 0x00180000 573 #define TRACE_LAYER_BTU 0x00190000 574 #define TRACE_LAYER_GKI 0x001a0000 575 #define TRACE_LAYER_BNEP 0x001b0000 576 #define TRACE_LAYER_PAN 0x001c0000 577 #define TRACE_LAYER_HFP 0x001d0000 578 #define TRACE_LAYER_HID 0x001e0000 579 #define TRACE_LAYER_BIP 0x001f0000 580 #define TRACE_LAYER_AVP 0x00200000 581 #define TRACE_LAYER_A2D 0x00210000 582 #define TRACE_LAYER_SAP 0x00220000 583 #define TRACE_LAYER_AMP 0x00230000 584 #define TRACE_LAYER_MCA 0x00240000 585 #define TRACE_LAYER_ATT 0x00250000 586 #define TRACE_LAYER_SMP 0x00260000 587 #define TRACE_LAYER_NFC 0x00270000 588 #define TRACE_LAYER_NCI 0x00280000 /*it's overwritten in nfc_types.h*/ 589 #define TRACE_LAYER_LLCP 0x00290000 590 #define TRACE_LAYER_NDEF 0x002a0000 591 #define TRACE_LAYER_RW 0x002b0000 592 #define TRACE_LAYER_CE 0x002c0000 593 #define TRACE_LAYER_P2P 0x002d0000 594 #define TRACE_LAYER_SNEP 0x002e0000 595 #define TRACE_LAYER_CHO 0x002f0000 596 #define TRACE_LAYER_NFA 0x00300000 597 #define TRACE_LAYER_HAL 0x00310000 /*it's overwritten in nfc_types.h*/ 598 #define TRACE_LAYER_MAX_NUM 0x0032 599 600 601 /* TRACE_ORIGINATOR 0x0000^^00*/ 602 #define TRACE_ORG_MASK 0x0000ff00 603 #define TRACE_GET_ORG(x) ((((UINT32)(x)) & TRACE_ORG_MASK) >> 8) 604 605 #define TRACE_ORG_STACK 0x00000000 606 #define TRACE_ORG_HCI_TRANS 0x00000100 607 #define TRACE_ORG_PROTO_DISP 0x00000200 608 #define TRACE_ORG_RPC 0x00000300 609 #define TRACE_ORG_GKI 0x00000400 610 #define TRACE_ORG_APPL 0x00000500 611 #define TRACE_ORG_SCR_WRAPPER 0x00000600 612 #define TRACE_ORG_SCR_ENGINE 0x00000700 613 #define TRACE_ORG_USER_SCR 0x00000800 614 #define TRACE_ORG_TESTER 0x00000900 615 #define TRACE_ORG_MAX_NUM 10 /* 32-bit mask; must be < 32 */ 616 #define TRACE_LITE_ORG_MAX_NUM 6 617 #define TRACE_ORG_ALL 0x03ff 618 #define TRACE_ORG_RPC_TRANS 0x04 619 620 #define TRACE_ORG_REG 0x00000909 621 #define TRACE_ORG_REG_SUCCESS 0x0000090a 622 623 /* TRACE_TYPE 0x000000^^*/ 624 #define TRACE_TYPE_MASK 0x000000ff 625 #define TRACE_GET_TYPE(x) (((UINT32)(x)) & TRACE_TYPE_MASK) 626 627 #define TRACE_TYPE_ERROR 0x00000000 628 #define TRACE_TYPE_WARNING 0x00000001 629 #define TRACE_TYPE_API 0x00000002 630 #define TRACE_TYPE_EVENT 0x00000003 631 #define TRACE_TYPE_DEBUG 0x00000004 632 #define TRACE_TYPE_STACK_ONLY_MAX TRACE_TYPE_DEBUG 633 #define TRACE_TYPE_TX 0x00000005 634 #define TRACE_TYPE_RX 0x00000006 635 #define TRACE_TYPE_DEBUG_ASSERT 0x00000007 636 #define TRACE_TYPE_GENERIC 0x00000008 637 #define TRACE_TYPE_REG 0x00000009 638 #define TRACE_TYPE_REG_SUCCESS 0x0000000a 639 #define TRACE_TYPE_CMD_TX 0x0000000b 640 #define TRACE_TYPE_EVT_TX 0x0000000c 641 #define TRACE_TYPE_ACL_TX 0x0000000d 642 #define TRACE_TYPE_CMD_RX 0x0000000e 643 #define TRACE_TYPE_EVT_RX 0x0000000f 644 #define TRACE_TYPE_ACL_RX 0x00000010 645 #define TRACE_TYPE_TARGET_TRACE 0x00000011 646 #define TRACE_TYPE_SCO_TX 0x00000012 647 #define TRACE_TYPE_SCO_RX 0x00000013 648 649 650 #define TRACE_TYPE_MAX_NUM 20 651 #define TRACE_TYPE_ALL 0xffff 652 653 /* Define color for script type */ 654 #define SCR_COLOR_DEFAULT 0 655 #define SCR_COLOR_TYPE_COMMENT 1 656 #define SCR_COLOR_TYPE_COMMAND 2 657 #define SCR_COLOR_TYPE_EVENT 3 658 #define SCR_COLOR_TYPE_SELECT 4 659 660 /* Define protocol trace flag values */ 661 #define SCR_PROTO_TRACE_HCI_SUMMARY 0x00000001 662 #define SCR_PROTO_TRACE_HCI_DATA 0x00000002 663 #define SCR_PROTO_TRACE_L2CAP 0x00000004 664 #define SCR_PROTO_TRACE_RFCOMM 0x00000008 665 #define SCR_PROTO_TRACE_SDP 0x00000010 666 #define SCR_PROTO_TRACE_TCS 0x00000020 667 #define SCR_PROTO_TRACE_OBEX 0x00000040 668 #define SCR_PROTO_TRACE_OAPP 0x00000080 /* OBEX Application Profile */ 669 #define SCR_PROTO_TRACE_AMP 0x00000100 670 #define SCR_PROTO_TRACE_BNEP 0x00000200 671 #define SCR_PROTO_TRACE_AVP 0x00000400 672 #define SCR_PROTO_TRACE_MCA 0x00000800 673 #define SCR_PROTO_TRACE_ATT 0x00001000 674 #define SCR_PROTO_TRACE_SMP 0x00002000 675 #define SCR_PROTO_TRACE_NCI 0x00004000 676 #define SCR_PROTO_TRACE_LLCP 0x00008000 677 #define SCR_PROTO_TRACE_NDEF 0x00010000 678 #define SCR_PROTO_TRACE_RW 0x00020000 679 #define SCR_PROTO_TRACE_CE 0x00040000 680 #define SCR_PROTO_TRACE_SNEP 0x00080000 681 #define SCR_PROTO_TRACE_CHO 0x00100000 682 #define SCR_PROTO_TRACE_ALL 0x001fffff 683 #define SCR_PROTO_TRACE_HCI_LOGGING_VSE 0x0800 /* Brcm vs event for logmsg and protocol traces */ 684 685 #define MAX_SCRIPT_TYPE 5 686 687 #define TCS_PSM_INTERCOM 5 688 #define TCS_PSM_CORDLESS 7 689 #define BT_PSM_BNEP 0x000F 690 /* Define PSMs HID uses */ 691 #define HID_PSM_CONTROL 0x0011 692 #define HID_PSM_INTERRUPT 0x0013 693 694 #if defined(UCD_HID_INCLUDED) && (UCD_HID_INCLUDED == TRUE) 695 #define UCD_PSM_MIN 0x8001 696 #define UCD_PSM_MAX 0x8003 697 #define UCD_PSM_HID_CTRL 0x8001 698 #define UCD_PSM_HID_INTR 0x8003 699 #endif 700 701 #if defined(HIDH_UCD_INCLUDED) && (HIDH_UCD_INCLUDED == TRUE) 702 #define HID_UCD_PSM_CONTROL 0x8001 703 #define HID_UCD_PSM_INTERRUPT 0x8003 704 #endif 705 706 /* Define a function for logging */ 707 typedef void (BT_LOG_FUNC) (int trace_type, const char *fmt_str, ...); 708 709 #endif 710 711
