1 /****************************************************************************** 2 * 3 * Copyright (C) 2001-2012 Broadcom Corporation 4 * 5 * Licensed under the Apache License, Version 2.0 (the "License"); 6 * you may not use this file except in compliance with the License. 7 * You may obtain a copy of the License at: 8 * 9 * http://www.apache.org/licenses/LICENSE-2.0 10 * 11 * Unless required by applicable law or agreed to in writing, software 12 * distributed under the License is distributed on an "AS IS" BASIS, 13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 14 * See the License for the specific language governing permissions and 15 * limitations under the License. 16 * 17 ******************************************************************************/ 18 19 /****************************************************************************** 20 * 21 * This file contains codec definitions from Widcomm's Universal Embedded 22 * Drivers API. 23 * 24 ******************************************************************************/ 25 26 #ifndef UCODEC_H 27 #define UCODEC_H 28 29 #include "bt_target.h" 30 #ifdef __cplusplus 31 extern "C" { 32 #endif 33 34 35 /******************************************************************************* 36 ** Codec APIs 37 *******************************************************************************/ 38 39 /**** Codec IDs ****/ 40 #define UCODEC_ID_1 0 41 #define UCODEC_ID_2 1 42 #define UCODEC_ID_3 2 43 #define UCODEC_ID_4 3 44 #define UCODEC_NUMBER 4 45 46 typedef UINT8 tUCODEC_ID; 47 48 /**** Status ****/ 49 #define UCODEC_SUCCESS 0x00 50 #define UCODEC_TX_DONE 0x01 51 #define UCODEC_RX_READY 0x02 52 #define UCODEC_FLOW_CTRL_ON 0x03 53 #define UCODEC_FLOW_CTRL_OFF 0x04 54 #define UCODEC_OVERFLOW 0x05 55 #define UCODEC_UNSUPORTED_CNF 0x06 56 #define UCODEC_WRONG_PARAM 0x07 57 #define UCODEC_NOT_CONFIGURED 0x08 58 #define UCODEC_OUT_OF_MEMORY 0x09 59 #define UCODEC_GENERIC_ERROR 0x0a 60 #define UCODEC_RECOVERABLE_ERROR 0x0b 61 #define UCODEC_UNRECOVERABLE_ERROR 0x0c 62 #define UCODEC_LOW_LEVEL_DRIVER_ERROR (0x0d) 63 64 typedef UINT8 tUCODEC_STATUS; 65 66 /**** Media type ****/ 67 #define UCODEC_MEDIA_TYPE_AUDIO 0 68 #define UCODEC_MEDIA_TYPE_VIDEO 1 69 #define UCODEC_MEDIA_TYPE_MULTI 2 70 71 typedef UINT8 tUCODEC_MEDIA_TYPE; 72 73 /**** Audio Codec type ****/ 74 #define UCODEC_AUDIO_SBC 0 75 #define UCODEC_AUDIO_M12_LAYER1 1 /* layer1 (mp1) */ 76 #define UCODEC_AUDIO_M12_LAYER2 2 /* layer2 (mp2) */ 77 #define UCODEC_AUDIO_M12_LAYER3 3 /* layer3 (mp3) */ 78 #define UCODEC_AUDIO_M24_2LC 4 /* MPEG-2 AAC LC */ 79 #define UCODEC_AUDIO_M24_4LC 5 /* MPEG-4 AAC LC */ 80 #define UCODEC_AUDIO_M24_4LTP 6 /* MPEG-4 AAC LTP */ 81 #define UCODEC_AUDIO_M24_4S 7 /* MPEG-4 AAC scalable */ 82 #define UCODEC_AUDIO_VOLUME 8 /* Volume settings */ 83 #define UCODEC_AUDIO_BALANCE 9 /* Balance settings */ 84 85 typedef UINT8 tUCODEC_AUDIO_FEAT_TYPE; 86 87 /**** Video Codec type -> TODO ****/ 88 /*TBD*/ 89 90 typedef UINT8 tUCODEC_VIDEO_FEAT_TYPE; 91 92 /**** SBC sample frequency ****/ 93 #define UCODEC_SBC_SMP_FREQ_16 0 /* 16 */ 94 #define UCODEC_SBC_SMP_FREQ_32 1 /* 23 */ 95 #define UCODEC_SBC_SMP_FREQ_44 2 /* 44.1 */ 96 #define UCODEC_SBC_SMP_FREQ_48 3 /* 48 */ 97 98 typedef UINT8 tUCODEC_SBC_SMP_FREQ; 99 100 /**** SBC sample frequency ****/ 101 #define UCODEC_SBC_SUBBAND_4 4 102 #define UCODEC_SBC_SUBBAND_8 8 103 104 typedef UINT8 tUCODEC_SBC_SUBBAND; 105 /**** Allocation method ****/ 106 #define UCODEC_SBC_ALLOC_MD_S 0 /* SNR */ 107 #define UCODEC_SBC_ALLOC_MD_L 1 /* loundess */ 108 109 typedef UINT8 tUCODEC_SBC_ALLOC_MD; 110 111 /**** MPEG sample frequency ****/ 112 #define UCODEC_M12_SMP_FREQ_16 0 /* 16 */ 113 #define UCODEC_M12_SMP_FREQ_22 1 /* 22 */ 114 #define UCODEC_M12_SMP_FREQ_24 2 /* 24 */ 115 #define UCODEC_M12_SMP_FREQ_32 3 /* 32 */ 116 #define UCODEC_M12_SMP_FREQ_44 4 /* 44 */ 117 #define UCODEC_M12_SMP_FREQ_48 5 /* 48 */ 118 119 typedef UINT8 tUCODEC_M12_SMP_FREQ; 120 121 /**** Channel mode ****/ 122 #define UCODEC_CHN_MONO 0 123 #define UCODEC_CHN_DUAL 1 124 #define UCODEC_CHN_STEREO 2 125 #define UCODEC_CHN_JOINT_STEREO 3 126 127 typedef UINT8 tUCODEC_CH_MODE; 128 /**** Audio Codec type ****/ 129 #define UCODEC_M24_SMP_FREQ_8 0 /* 8 */ 130 #define UCODEC_M24_SMP_FREQ_11 1 /* 11 */ 131 #define UCODEC_M24_SMP_FREQ_12 2 /* 12 */ 132 #define UCODEC_M24_SMP_FREQ_16 3 /* 16 */ 133 #define UCODEC_M24_SMP_FREQ_22 4 /* 22.05 */ 134 #define UCODEC_M24_SMP_FREQ_24 5 /* 24 */ 135 #define UCODEC_M24_SMP_FREQ_32 6 /* 32 */ 136 #define UCODEC_M24_SMP_FREQ_44 7 /* 44.1 */ 137 #define UCODEC_M24_SMP_FREQ_48 8 /* 48 */ 138 #define UCODEC_M24_SMP_FREQ_64 9 /* 64 */ 139 #define UCODEC_M24_SMP_FREQ_88 10 /* 88 */ 140 #define UCODEC_M24_SMP_FREQ_96 11 /* 96 */ 141 142 typedef UINT8 tUCODEC_M24_SMP_FREQ; 143 144 /**** Codec configuration structure ****/ 145 typedef struct tUCODEC_CNF_SBC_TAG 146 { 147 tUCODEC_SBC_SMP_FREQ SampleFreq; 148 tUCODEC_CH_MODE ChannelMode; 149 UINT16 Offset; /* GKI buffer based offset for UCODEC_ReadBuf */ 150 UINT16 MtuSize; /* Max buffer len for UCODEC_ReadBuf*/ 151 UINT8 PoolId; /* GKI pool ID for UCODEC_ReadBuf */ 152 UINT8 NumBlock; /* Number of block in block unit : 4 blocks 8 blocks 12 blocks 16 blocks are the possible value */ 153 UINT8 Subband; 154 tUCODEC_SBC_ALLOC_MD AllocMthd; 155 UINT8 MinBitPool; 156 UINT8 MaxBitPool; 157 } tUCODEC_CNF_SBC; 158 159 typedef struct tUCODEC_CNF_M12_TAG 160 { 161 tUCODEC_CH_MODE ChannelMode; /* Mono, Dual, stereo, joint stereo */ 162 tUCODEC_M12_SMP_FREQ SampleFreq; /* Sample freq: 16, 22, 24, 32, 44, 48 */ 163 UINT16 BitRate; /* Bit rate in bit per sec */ 164 UINT16 Offset; /* GKI buffer based offset for UCODEC_ReadBuf */ 165 UINT16 MtuSize; /* Max buffer len for UCODEC_ReadBuf*/ 166 UINT8 PoolId; /* GKI pool ID for UCODEC_ReadBuf */ 167 BOOLEAN VBR; /* Variable Bit Rate */ 168 BOOLEAN CRC_On; /* CRC error detection */ 169 BOOLEAN MPF; /* Media payload format */ 170 } tUCODEC_CNF_M12; 171 172 typedef struct tUCODEC_CNF_M24_TAG 173 { 174 tUCODEC_M24_SMP_FREQ SampleFreq; /* Sample freq: 8, 11, 12, 16, 22.05, 24, 32, 44.1, 48, 64, 88, 96 */ 175 UINT32 BitRate; /* Bit rate */ 176 UINT16 Offset; /* GKI buffer based offset for UCODEC_ReadBuf */ 177 UINT16 MtuSize; /* Max buffer len for UCODEC_ReadBuf*/ 178 UINT8 PoolId; /* GKI pool ID for UCODEC_ReadBuf */ 179 UINT8 Chanels; /* 1 or 2 chanels */ 180 } tUCODEC_CNF_M24; 181 182 183 typedef union tUCODEC_CODEC_TYPE_TAG 184 { 185 tUCODEC_AUDIO_FEAT_TYPE AudioType; 186 tUCODEC_VIDEO_FEAT_TYPE VideoType; 187 } tUCODEC_CODEC_TYPE; 188 189 typedef union tUCODEC_FEATURE_TAG 190 { 191 /* Add here the audio feature structure */ 192 tUCODEC_CNF_SBC SBCConfig; 193 tUCODEC_CNF_M12 M12Config; 194 tUCODEC_CNF_M24 M24Config; 195 UINT8 Volume; /* 0 to mute. 0xFF for the max volume */ 196 UINT8 Balance; /* 0->100% right, 255->100% left */ 197 /* Add here the video feature structure */ 198 /* TBD */ 199 } tUCODEC_FEATURE; 200 201 typedef struct tUCODEC_CNF_TAG 202 { 203 tUCODEC_MEDIA_TYPE MediaType; 204 tUCODEC_CODEC_TYPE Type; 205 tUCODEC_FEATURE Feature; 206 } tUCODEC_CNF; 207 208 typedef struct tUCODEC_BUF_INFO_TAG 209 { 210 UINT8 NumOfFrames; 211 UINT32 TimesStamp; 212 } tUCODEC_BUF_INFO; 213 214 215 /****************************************************************************** 216 ** 217 ** Function tUCODEC_CBACK_PTR 218 ** 219 ** Description This call back report CODEC indication. 220 ** It report codec error as well as flow onfrol indication. 221 ** 222 ** Input : CodecId: Id of the codec that calls this call back. 223 ** Status: ->UCODEC_FLOW_CTRL_OFF if the Tx Q just 224 ** went below the low watermark 225 ** ->UCODEC_RX_READY if data are ready to be 226 ** read. This olny hapens when the Rx Q was 227 ** empty before receiving data. 228 ** ->UCODEC_INTERNAL_ERROR if something went 229 ** wrong with the driver 230 ** 231 ** Output Parameters : None 232 ** 233 ** Returns None. 234 ** 235 ******************************************************************************/ 236 typedef void (* tUCODEC_CBACK_PTR)(tUCODEC_ID, tUCODEC_STATUS); 237 238 /******************************************************************************* 239 ** Function Prototypes 240 *******************************************************************************/ 241 242 /****************************************************************************** 243 ** 244 ** Function UCODEC_Init 245 ** 246 ** Description Startup initialisation function. This function is called 247 ** before any orther function of UCODEC it initialize UCODEC 248 ** internal structure an the external codec. 249 ** 250 ** Input : CodecId: Id of the codec to perform the operation on. 251 ** 252 ** Output Parameters : None 253 ** 254 ** Returns UCODEC_SUCCESS if The action was performed with sucess. 255 ** Error code else. 256 ** 257 ******************************************************************************/ 258 BT_API extern tUCODEC_STATUS UCODEC_Init (void *); 259 260 /****************************************************************************** 261 ** 262 ** Function UCODEC_Configure 263 ** 264 ** Description Initialise the CODEC for a particular stream. 265 ** 266 ** 267 ** Input : CodecId: Id of the codec to perform the operation on. 268 ** CbackPrt: Call back pointer for codec feedback. 269 ** pConfig: Pointer on a codec configuration structure. 270 ** 271 ** Output Parameters : None 272 ** 273 ** Returns UCODEC_SUCCESS if The action was performed with sucess. 274 ** 275 ******************************************************************************/ 276 BT_API extern tUCODEC_STATUS UCODEC_Configure (tUCODEC_ID, tUCODEC_CBACK_PTR, tUCODEC_CNF *); 277 278 /****************************************************************************** 279 ** 280 ** Function UCODEC_FlushTx 281 ** 282 ** Description Fluch Tx buffer Q. 283 ** 284 ** Input : CodecId: Id of the codec to perform the operation on. 285 ** 286 ** Output Parameters : None 287 ** 288 ** Returns UCODEC_SUCCESS if The action was performed with sucess. 289 ** Error code else. 290 ** 291 ******************************************************************************/ 292 BT_API extern tUCODEC_STATUS UCODEC_FlushTx (tUCODEC_ID); 293 294 /****************************************************************************** 295 ** 296 ** Function UCODEC_FlushRx 297 ** 298 ** Description Fluch Rx buffer Q. 299 ** 300 ** Input : CodecId: Id of the codec to perform the operation on. 301 ** 302 ** Output Parameters : None 303 ** 304 ** Returns UCODEC_SUCCESS if The action was performed with sucess. 305 ** Error code else. 306 ** 307 ******************************************************************************/ 308 BT_API extern tUCODEC_STATUS UCODEC_FlushRx (tUCODEC_ID); 309 310 /****************************************************************************** 311 ** 312 ** Function UCODEC_WriteBuf 313 ** 314 ** Description Send a buffer to the codec. 315 ** 316 ** Input : CodecId: Id of the codec to perform the operation on. 317 ** pBuf: Pointer onto the GKI buffer to be send to the CODEC. 318 ** 319 ** Output Parameters : None 320 ** 321 ** Returns UCODEC_SUCCESS if The action was performed with sucess. 322 ** UCODEC_FLOW_CTRL_ON if The codec buffer Q had reach a UCODEC_HIGH_WM 323 ** watermark. The buffer is queued 324 ** UCODEC_OVERFLOW if The codec buffer Q had reach a critical 325 ** watermark. The buffer is dropped. 326 ** 327 ******************************************************************************/ 328 BT_API extern tUCODEC_STATUS UCODEC_WriteBuf (tUCODEC_ID, BT_HDR *); 329 330 /****************************************************************************** 331 ** 332 ** Function UCODEC_ReadBuf 333 ** 334 ** Description Get a buffer from the codec. 335 ** 336 ** Input : CodecId: Id of the codec to perform the operation on. 337 ** 338 ** Output Parameters : None 339 ** 340 ** Returns Pointer on the GKI buffer. NULL if the Rx Q is empty 341 ** 342 ******************************************************************************/ 343 BT_API extern tUCODEC_STATUS UCODEC_ReadBuf (tUCODEC_ID, BT_HDR **, tUCODEC_BUF_INFO *); 344 345 /****************************************************************************** 346 ** 347 ** Function UCODEC_Close 348 ** 349 ** Description This function is called to put the codec in low power mode 350 ** 351 ** 352 ** Input : CodecId: Id of the codec to perform the operation on. 353 ** 354 ** Output Parameters : None 355 ** 356 ** Returns UCODEC_SUCCESS : The action was performed with sucess. 357 ** Error code else. 358 ** 359 ******************************************************************************/ 360 BT_API extern tUCODEC_STATUS UCODEC_Close (tUCODEC_ID); 361 362 /****************************************************************************** 363 ** 364 ** Function UCODEC_Open 365 ** 366 ** Description This function is called to resume the codec from low power 367 ** mode after UCODEC_Close had been called. It will put the 368 ** codec in the state it was before UCODEC_Close being called. 369 ** 370 ** Input : CodecId: Id of the codec to perform the operation on. 371 ** 372 ** Output Parameters : None 373 ** 374 ** Returns UCODEC_SUCCESS : The action was performed with sucess. 375 ** Error code else. 376 ** 377 ******************************************************************************/ 378 BT_API extern tUCODEC_STATUS UCODEC_Open (tUCODEC_ID); 379 380 #ifdef __cplusplus 381 }; 382 #endif 383 384 385 #endif /* UCODEC_H */ 386
