1 ASHIELD Board, v2.2 2 3/25/2011 3 4 Route board out on 0-mil perimeter in top silk. 5 6 Standard .062" FR4, 1oz Cu, RoHS, HASL 7 8 Board is 2 layers, plus unusual silk screen (see notes below) 9 10 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 11 NOTE: VENDOR MARK AND TEST STAMP SHOULD BE PLACED WITHIN JOY1 RECTANGLE. 12 MARK AND STAMP MUST NOT BE VISIBLE ONCE BOARD IS ASSEMBLED. 13 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 14 15 Other Notes: 16 17 Board is WHITE SMOBC 18 19 ashield_blk.plc BLACK primary (first applied) silk, component side 20 This is a base silk. Colored silks go on top of this one. 21 22 ashield_blk.pls BLACK silk for bottom (solder) side of board 23 24 ashield.drl Drill rack 25 ashield.drd Excellon drill file 26 27 ashield.cmp Component side copper 28 ashield.stc Component side stop mask 29 30 ashield.sol Solder side copper 31 ashield.sts Solder side stop mask 32 33 All components on TOP side of board, EXCEPT for 6 single-row in-line headers 34 on left and right edges. There is 1 6-pin header and 5 8-pin headers. These 35 mount from the bottom, and are soldered from the top. 36 37 Through-hole leads should be trimmed flush. 38 39
