1 /****************************************************************************** 2 * 3 * Copyright (C) 1999-2012 Broadcom Corporation 4 * 5 * Licensed under the Apache License, Version 2.0 (the "License"); 6 * you may not use this file except in compliance with the License. 7 * You may obtain a copy of the License at: 8 * 9 * http://www.apache.org/licenses/LICENSE-2.0 10 * 11 * Unless required by applicable law or agreed to in writing, software 12 * distributed under the License is distributed on an "AS IS" BASIS, 13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 14 * See the License for the specific language governing permissions and 15 * limitations under the License. 16 * 17 ******************************************************************************/ 18 19 /****************************************************************************** 20 * 21 * This file contains the Bluetooth Manager (BTM) API function external 22 * definitions. 23 * 24 ******************************************************************************/ 25 #ifndef BTM_BLE_API_H 26 #define BTM_BLE_API_H 27 28 #include "btm_api.h" 29 30 #define CHNL_MAP_LEN 5 31 typedef UINT8 tBTM_BLE_CHNL_MAP[CHNL_MAP_LEN]; 32 33 #define BTM_BLE_CONNECT_EVT 0x00 34 #define BTM_BLE_CONNECT_DIR_EVT 0x01 35 #define BTM_BLE_DISCOVER_EVT 0x02 36 #define BTM_BLE_NON_CONNECT_EVT 0x03 37 #define BTM_BLE_SCAN_RSP_EVT 0x04 38 #define BTM_BLE_SCAN_REQ_EVT 0x06 39 #define BTM_BLE_UNKNOWN_EVT 0xff 40 41 #define BTM_BLE_UNKNOWN_EVT 0xff 42 43 #define BTM_BLE_SCAN_MODE_PASS 0 44 #define BTM_BLE_SCAN_MODE_ACTI 1 45 #define BTM_BLE_SCAN_MODE_NONE 0xff 46 typedef UINT8 tBTM_BLE_SCAN_MODE; 47 48 /* advertising channel map */ 49 #define BTM_BLE_ADV_CHNL_37 (0x01 << 0) 50 #define BTM_BLE_ADV_CHNL_38 (0x01 << 1) 51 #define BTM_BLE_ADV_CHNL_39 (0x01 << 2) 52 typedef UINT8 tBTM_BLE_ADV_CHNL_MAP; 53 54 /*d efault advertising channel map */ 55 #ifndef BTM_BLE_DEFAULT_ADV_CHNL_MAP 56 #define BTM_BLE_DEFAULT_ADV_CHNL_MAP (BTM_BLE_ADV_CHNL_37| BTM_BLE_ADV_CHNL_38| BTM_BLE_ADV_CHNL_39) 57 #endif 58 59 /* advertising filter policy */ 60 #define AP_SCAN_CONN_ALL 0x00 /* default */ 61 #define AP_SCAN_WL_CONN_ALL 0x01 62 #define AP_SCAN_ALL_CONN_WL 0x02 63 #define AP_SCAN_CONN_WL 0x03 64 #define AP_SCAN_CONN_POLICY_MAX 0x04 65 typedef UINT8 tBTM_BLE_AFP; 66 67 /* default advertising filter policy */ 68 #ifndef BTM_BLE_DEFAULT_AFP 69 #define BTM_BLE_DEFAULT_AFP AP_SCAN_CONN_ALL 70 #endif 71 72 /* scanning filter policy */ 73 #define SP_ADV_ALL 0x00 /* accept adv pakt from all, directed adv pkt not directed to me is ignored */ 74 #define SP_ADV_WL 0x01 /* accept adv pakt from device in white list, directed adv pkt not directed to me is ignored */ 75 typedef UINT8 tBTM_BLE_SFP; 76 77 #ifndef BTM_BLE_DEFAULT_SFP 78 #define BTM_BLE_DEFAULT_SFP SP_ADV_ALL 79 #endif 80 81 /* adv parameter boundary values */ 82 #define BTM_BLE_ADV_INT_MIN 0x0020 83 #define BTM_BLE_ADV_INT_MAX 0x4000 84 85 /* connection parameter boundary values */ 86 #define BTM_BLE_SCAN_INT_MIN 0x0004 87 #define BTM_BLE_SCAN_INT_MAX 0x4000 88 #define BTM_BLE_SCAN_WIN_MIN 0x0004 89 #define BTM_BLE_SCAN_WIN_MAX 0x4000 90 #define BTM_BLE_CONN_INT_MIN 0x0006 91 #define BTM_BLE_CONN_INT_MAX 0x0C80 92 #define BTM_BLE_CONN_LATENCY_MAX 500 93 #define BTM_BLE_CONN_SUP_TOUT_MIN 0x000A 94 #define BTM_BLE_CONN_SUP_TOUT_MAX 0x0C80 95 #define BTM_BLE_CONN_PARAM_UNDEF 0xffff /* use this value when a specific value not to be overwritten */ 96 #define BTM_BLE_CONN_SUP_TOUT_DEF 700 97 98 /* default connection parameters if not configured, use GAP recommend value for auto/selective connection */ 99 /* default scan interval */ 100 #ifndef BTM_BLE_SCAN_FAST_INT 101 #define BTM_BLE_SCAN_FAST_INT 96 /* 30 ~ 60 ms (use 60) = 96 *0.625 */ 102 #endif 103 /* default scan window for background connection, applicable for auto connection or selective conenction */ 104 #ifndef BTM_BLE_SCAN_FAST_WIN 105 #define BTM_BLE_SCAN_FAST_WIN 48 /* 30 ms = 48 *0.625 */ 106 #endif 107 108 /* default scan paramter used in reduced power cycle (background scanning) */ 109 #ifndef BTM_BLE_SCAN_SLOW_INT_1 110 #define BTM_BLE_SCAN_SLOW_INT_1 2048 /* 1.28 s = 2048 *0.625 */ 111 #endif 112 #ifndef BTM_BLE_SCAN_SLOW_WIN_1 113 #define BTM_BLE_SCAN_SLOW_WIN_1 18 /* 11.25 ms = 18 *0.625 */ 114 #endif 115 116 /* default scan paramter used in reduced power cycle (background scanning) */ 117 #ifndef BTM_BLE_SCAN_SLOW_INT_2 118 #define BTM_BLE_SCAN_SLOW_INT_2 4096 /* 2.56 s = 4096 *0.625 */ 119 #endif 120 #ifndef BTM_BLE_SCAN_SLOW_WIN_2 121 #define BTM_BLE_SCAN_SLOW_WIN_2 36 /* 22.5 ms = 36 *0.625 */ 122 #endif 123 124 /* default connection interval min */ 125 #ifndef BTM_BLE_CONN_INT_MIN_DEF 126 #define BTM_BLE_CONN_INT_MIN_DEF 24 /* recommended min: 30ms = 24 * 1.25 */ 127 #endif 128 /* default connectino interval max */ 129 #ifndef BTM_BLE_CONN_INT_MAX_DEF 130 #define BTM_BLE_CONN_INT_MAX_DEF 40 /* recommended max: 50 ms = 56 * 1.25 */ 131 #endif 132 /* default slave latency */ 133 #ifndef BTM_BLE_CONN_SLAVE_LATENCY_DEF 134 #define BTM_BLE_CONN_SLAVE_LATENCY_DEF 0 /* 0 */ 135 #endif 136 /* default supervision timeout */ 137 #ifndef BTM_BLE_CONN_TIMEOUT_DEF 138 #define BTM_BLE_CONN_TIMEOUT_DEF 2000 139 #endif 140 141 #define BTM_BLE_DIR_CONN_FALLBACK_UNDIR 1 142 #define BTM_BLE_DIR_CONN_FALLBACK_NO_ADV 2 143 144 #ifndef BTM_BLE_DIR_CONN_FALLBACK 145 #define BTM_BLE_DIR_CONN_FALLBACK BTM_BLE_DIR_CONN_FALLBACK_UNDIR 146 #endif 147 148 #define BTM_CMAC_TLEN_SIZE 8 /* 64 bits */ 149 #define BTM_BLE_AUTH_SIGN_LEN 12 /* BLE data signature length 8 Bytes + 4 bytes counter*/ 150 typedef UINT8 BLE_SIGNATURE[BTM_BLE_AUTH_SIGN_LEN]; /* Device address */ 151 152 #ifndef BTM_BLE_HOST_SUPPORT 153 #define BTM_BLE_HOST_SUPPORT 0x01 154 #endif 155 156 #ifndef BTM_BLE_SIMULTANEOUS_HOST 157 #define BTM_BLE_SIMULTANEOUS_HOST 0x01 158 #endif 159 160 /* Structure returned with Rand/Encrypt complete callback */ 161 typedef struct 162 { 163 UINT8 status; 164 UINT8 param_len; 165 UINT16 opcode; 166 UINT8 param_buf[BT_OCTET16_LEN]; 167 } tBTM_RAND_ENC; 168 169 /* General callback function for notifying an application that a synchronous 170 ** BTM function is complete. The pointer contains the address of any returned data. 171 */ 172 typedef void (tBTM_RAND_ENC_CB) (tBTM_RAND_ENC *p1); 173 174 #define BTM_BLE_FILTER_TARGET_SCANNER 0x01 175 #define BTM_BLE_FILTER_TARGET_ADVR 0x00 176 177 #define BTM_BLE_POLICY_BLACK_ALL 0x00 /* relevant to both */ 178 #define BTM_BLE_POLICY_ALLOW_SCAN 0x01 /* relevant to advertiser */ 179 #define BTM_BLE_POLICY_ALLOW_CONN 0x02 /* relevant to advertiser */ 180 #define BTM_BLE_POLICY_WHITE_ALL 0x03 /* relevant to both */ 181 182 typedef struct 183 { 184 UINT8 adv_int_min; 185 UINT8 adv_int_max; 186 tBTM_BLE_CHNL_MAP chnl_map; 187 188 }tBTM_BLE_ADV_PARAMS; 189 190 /* ADV data flag bit definition used for BTM_BLE_AD_TYPE_FLAG */ 191 #define BTM_BLE_LIMIT_DISC_FLAG (0x01 << 0) 192 #define BTM_BLE_GEN_DISC_FLAG (0x01 << 1) 193 #define BTM_BLE_BREDR_NOT_SPT (0x01 << 2) 194 #define BTM_BLE_NON_LIMIT_DISC_FLAG (0x00 ) /* lowest bit unset */ 195 #define BTM_BLE_ADV_FLAG_MASK (BTM_BLE_LIMIT_DISC_FLAG | BTM_BLE_BREDR_NOT_SPT | BTM_BLE_GEN_DISC_FLAG) 196 #define BTM_BLE_LIMIT_DISC_MASK (BTM_BLE_LIMIT_DISC_FLAG ) 197 198 #define BTM_BLE_AD_BIT_DEV_NAME (0x0001 << 0) 199 #define BTM_BLE_AD_BIT_FLAGS (0x0001 << 1) 200 #define BTM_BLE_AD_BIT_MANU (0x0001 << 2) 201 #define BTM_BLE_AD_BIT_TX_PWR (0x0001 << 3) 202 #define BTM_BLE_AD_BIT_INT_RANGE (0x0001 << 5) 203 #define BTM_BLE_AD_BIT_SERVICE (0x0001 << 6) 204 #define BTM_BLE_AD_BIT_SERVICE_SOL (0x0001 << 7) 205 #define BTM_BLE_AD_BIT_SERVICE_DATA (0x0001 << 8) 206 #define BTM_BLE_AD_BIT_SIGN_DATA (0x0001 << 9) 207 #define BTM_BLE_AD_BIT_SERVICE_128SOL (0x0001 << 10) 208 #define BTM_BLE_AD_BIT_APPEARANCE (0x0001 << 11) 209 #define BTM_BLE_AD_BIT_PUBLIC_ADDR (0x0001 << 12) 210 #define BTM_BLE_AD_BIT_RANDOM_ADDR (0x0001 << 13) 211 212 #define BTM_BLE_AD_BIT_PROPRIETARY (0x0001 << 15) 213 214 typedef UINT16 tBTM_BLE_AD_MASK; 215 216 #define BTM_BLE_AD_TYPE_FLAG HCI_EIR_FLAGS_TYPE /* 0x01 */ 217 #define BTM_BLE_AD_TYPE_16SRV_PART HCI_EIR_MORE_16BITS_UUID_TYPE /* 0x02 */ 218 #define BTM_BLE_AD_TYPE_16SRV_CMPL HCI_EIR_COMPLETE_16BITS_UUID_TYPE /* 0x03 */ 219 #define BTM_BLE_AD_TYPE_32SRV_PART HCI_EIR_MORE_32BITS_UUID_TYPE /* 0x04 */ 220 #define BTM_BLE_AD_TYPE_32SRV_CMPL HCI_EIR_COMPLETE_32BITS_UUID_TYPE /* 0x05 */ 221 #define BTM_BLE_AD_TYPE_128SRV_PART HCI_EIR_MORE_128BITS_UUID_TYPE /* 0x06 */ 222 #define BTM_BLE_AD_TYPE_128SRV_CMPL HCI_EIR_COMPLETE_128BITS_UUID_TYPE /* 0x07 */ 223 #define BTM_BLE_AD_TYPE_NAME_SHORT HCI_EIR_SHORTENED_LOCAL_NAME_TYPE /* 0x08 */ 224 #define BTM_BLE_AD_TYPE_NAME_CMPL HCI_EIR_COMPLETE_LOCAL_NAME_TYPE /* 0x09 */ 225 #define BTM_BLE_AD_TYPE_TX_PWR HCI_EIR_TX_POWER_LEVEL_TYPE /* 0x0A */ 226 #define BTM_BLE_AD_TYPE_DEV_CLASS 0x0D 227 #define BTM_BLE_AD_TYPE_SM_TK 0x10 228 #define BTM_BLE_AD_TYPE_SM_OOB_FLAG 0x11 229 #define BTM_BLE_AD_TYPE_INT_RANGE 0x12 230 #define BTM_BLE_AD_TYPE_SOL_SRV_UUID 0x14 231 #define BTM_BLE_AD_TYPE_128SOL_SRV_UUID 0x15 232 #define BTM_BLE_AD_TYPE_SERVICE_DATA 0x16 233 #define BTM_BLE_AD_TYPE_PUBLIC_TARGET 0x17 234 #define BTM_BLE_AD_TYPE_RANDOM_TARGET 0x18 235 #define BTM_BLE_AD_TYPE_APPEARANCE 0x19 236 #define BTM_BLE_AD_TYPE_MANU HCI_EIR_MANUFACTURER_SPECIFIC_TYPE /* 0xff */ 237 typedef UINT8 tBTM_BLE_AD_TYPE; 238 239 /* slave preferred connection interval range */ 240 typedef struct 241 { 242 UINT16 low; 243 UINT16 hi; 244 245 }tBTM_BLE_INT_RANGE; 246 247 /* Service tag supported in the device */ 248 typedef struct 249 { 250 UINT8 num_service; 251 BOOLEAN list_cmpl; 252 UINT16 *p_uuid; 253 }tBTM_BLE_SERVICE; 254 255 typedef struct 256 { 257 UINT8 len; 258 UINT8 *p_val; 259 }tBTM_BLE_MANU; 260 261 typedef struct 262 { 263 UINT8 adv_type; 264 UINT8 len; 265 UINT8 *p_val; /* number of len byte */ 266 }tBTM_BLE_PROP_ELEM; 267 268 typedef struct 269 { 270 UINT8 num_elem; 271 tBTM_BLE_PROP_ELEM *p_elem; 272 }tBTM_BLE_PROPRIETARY; 273 274 typedef struct 275 { 276 tBTM_BLE_MANU manu; /* manufactuer data */ 277 tBTM_BLE_INT_RANGE int_range; /* slave prefered conn interval range */ 278 tBTM_BLE_SERVICE services; /* services */ 279 UINT8 flag; 280 UINT16 appearance; 281 tBTM_BLE_PROPRIETARY *p_proprietary; 282 }tBTM_BLE_ADV_DATA; 283 284 /* These are the fields returned in each device adv packet. It 285 ** is returned in the results callback if registered. 286 */ 287 typedef struct 288 { 289 UINT8 conn_mode; 290 tBTM_BLE_AD_MASK ad_mask; /* mask of the valid adv data field */ 291 UINT8 flag; 292 UINT8 tx_power_level; 293 UINT8 remote_name_len; 294 UINT8 *p_remote_name; 295 tBTM_BLE_SERVICE service; 296 } tBTM_BLE_INQ_DATA; 297 298 enum 299 { 300 BTM_BLE_CONN_NONE, 301 BTM_BLE_CONN_AUTO, 302 BTM_BLE_CONN_SELECTIVE 303 }; 304 typedef UINT8 tBTM_BLE_CONN_TYPE; 305 306 typedef BOOLEAN (tBTM_BLE_SEL_CBACK)(BD_ADDR random_bda, UINT8 *p_remote_name); 307 308 /* callback function for SMP signing algorithm, signed data in little endian order with tlen bits long */ 309 typedef void (tBTM_BLE_SIGN_CBACK)(void *p_ref_data, UINT8 *p_signing_data); 310 typedef void (tBTM_BLE_VERIFY_CBACK)(void *p_ref_data, BOOLEAN match); 311 /* random address set complete callback */ 312 typedef void (tBTM_BLE_RANDOM_SET_CBACK) (BD_ADDR random_bda); 313 314 typedef void (tBTM_BLE_SCAN_REQ_CBACK)(BD_ADDR remote_bda, tBLE_ADDR_TYPE addr_type, UINT8 adv_evt); 315 316 /***************************************************************************** 317 ** EXTERNAL FUNCTION DECLARATIONS 318 *****************************************************************************/ 319 #ifdef __cplusplus 320 extern "C" { 321 #endif 322 /******************************************************************************* 323 ** 324 ** Function BTM_SecAddBleDevice 325 ** 326 ** Description Add/modify device. This function will be normally called 327 ** during host startup to restore all required information 328 ** for a LE device stored in the NVRAM. 329 ** 330 ** Parameters: bd_addr - BD address of the peer 331 ** bd_name - Name of the peer device. NULL if unknown. 332 ** dev_type - Remote device's device type. 333 ** addr_type - LE device address type. 334 ** 335 ** Returns TRUE if added OK, else FALSE 336 ** 337 *******************************************************************************/ 338 BTM_API extern BOOLEAN BTM_SecAddBleDevice (BD_ADDR bd_addr, BD_NAME bd_name, 339 tBT_DEVICE_TYPE dev_type, tBLE_ADDR_TYPE addr_type); 340 341 /******************************************************************************* 342 ** 343 ** Function BTM_SecAddBleKey 344 ** 345 ** Description Add/modify LE device information. This function will be 346 ** normally called during host startup to restore all required 347 ** information stored in the NVRAM. 348 ** 349 ** Parameters: bd_addr - BD address of the peer 350 ** p_le_key - LE key values. 351 ** key_type - LE SMP key type. 352 * 353 ** Returns TRUE if added OK, else FALSE 354 ** 355 *******************************************************************************/ 356 BTM_API extern BOOLEAN BTM_SecAddBleKey (BD_ADDR bd_addr, tBTM_LE_KEY_VALUE *p_le_key, 357 tBTM_LE_KEY_TYPE key_type); 358 359 /******************************************************************************* 360 ** 361 ** Function BTM_BleSetAdvParams 362 ** 363 ** Description This function is called to set advertising parameters. 364 ** 365 ** Parameters: None. 366 ** 367 ** Returns void 368 ** 369 *******************************************************************************/ 370 BTM_API extern tBTM_STATUS BTM_BleSetAdvParams(UINT16 adv_int_min, UINT16 adv_int_max, 371 tBLE_BD_ADDR *p_dir_bda, tBTM_BLE_ADV_CHNL_MAP chnl_map); 372 373 /******************************************************************************* 374 ** 375 ** Function BTM_BleWriteAdvData 376 ** 377 ** Description This function is called to write advertising data. 378 ** 379 ** Parameters: None. 380 ** 381 ** Returns void 382 ** 383 *******************************************************************************/ 384 BTM_API extern tBTM_STATUS BTM_BleWriteAdvData(tBTM_BLE_AD_MASK data_mask, 385 tBTM_BLE_ADV_DATA *p_data); 386 387 /******************************************************************************* 388 ** 389 ** Function BTM_BleSetAdvParams 390 ** 391 ** Description This function is called to set advertising parameters. 392 ** 393 ** Parameters adv_int_min: minimum advertising interval 394 ** adv_int_max: maximum advertising interval 395 ** p_dir_bda: connectable direct initiator's LE device address 396 ** chnl_map: advertising channel map. 397 ** 398 ** Returns void 399 ** 400 *******************************************************************************/ 401 BTM_API extern void BTM_BleReadAdvParams (UINT16 *adv_int_min, UINT16 *adv_int_max, 402 tBLE_BD_ADDR *p_dir_bda, tBTM_BLE_ADV_CHNL_MAP *p_chnl_map); 403 404 405 /******************************************************************************* 406 ** 407 ** Function BTM_BleSetScanParams 408 ** 409 ** Description This function is called to set Scan parameters. 410 ** 411 ** Parameters adv_int_min: minimum advertising interval 412 ** adv_int_max: maximum advertising interval 413 ** scan_type: scan mode. 414 ** 415 ** Returns void 416 ** 417 *******************************************************************************/ 418 BTM_API extern void BTM_BleSetScanParams(UINT16 scan_interval, UINT16 scan_window, 419 tBTM_BLE_SCAN_MODE scan_type); 420 421 /******************************************************************************* 422 ** 423 ** Function BTM_BleWriteScanRsp 424 ** 425 ** Description This function is called to write LE scan response. 426 ** 427 ** Parameters: p_scan_rsp: scan response. 428 ** 429 ** Returns status 430 ** 431 *******************************************************************************/ 432 BTM_API extern tBTM_STATUS BTM_BleWriteScanRsp(tBTM_BLE_AD_MASK data_mask, 433 tBTM_BLE_ADV_DATA *p_data); 434 435 /******************************************************************************* 436 ** 437 ** Function BTM_BleReset 438 ** 439 ** Description This function is called to reset ULP controller. 440 ** 441 ** Parameters None. 442 ** 443 ** Returns void 444 ** 445 *******************************************************************************/ 446 BTM_API extern void BTM_BleReset(void); 447 448 /******************************************************************************* 449 ** 450 ** Function BTM_BleObserve 451 ** 452 ** Description This procedure keep the device listening for advertising 453 ** events from a broadcast device. 454 ** 455 ** Parameters start: start or stop observe. 456 ** 457 ** Returns void 458 ** 459 *******************************************************************************/ 460 BTM_API extern tBTM_STATUS BTM_BleObserve(BOOLEAN start, UINT8 duration, 461 tBTM_INQ_RESULTS_CB *p_results_cb, tBTM_CMPL_CB *p_cmpl_cb); 462 463 464 /******************************************************************************* 465 ** 466 ** Function BTM_GetDeviceIDRoot 467 ** 468 ** Description This function is called to read the local device identity 469 ** root. 470 ** 471 ** Returns void 472 ** the local device ER is copied into er 473 ** 474 *******************************************************************************/ 475 BTM_API extern void BTM_GetDeviceIDRoot (BT_OCTET16 ir); 476 477 /******************************************************************************* 478 ** 479 ** Function BTM_GetDeviceEncRoot 480 ** 481 ** Description This function is called to read the local device encryption 482 ** root. 483 ** 484 ** Returns void 485 ** the local device ER is copied into er 486 ** 487 *******************************************************************************/ 488 BTM_API extern void BTM_GetDeviceEncRoot (BT_OCTET16 er); 489 490 /******************************************************************************* 491 ** 492 ** Function BTM_GetDeviceDHK 493 ** 494 ** Description This function is called to read the local device DHK. 495 ** 496 ** Returns void 497 ** the local device DHK is copied into dhk 498 ** 499 *******************************************************************************/ 500 BTM_API extern void BTM_GetDeviceDHK (BT_OCTET16 dhk); 501 502 /******************************************************************************* 503 ** 504 ** Function BTM_SecurityGrant 505 ** 506 ** Description This function is called to grant security process. 507 ** 508 ** Parameters bd_addr - peer device bd address. 509 ** res - result of the operation BTM_SUCCESS if success. 510 ** Otherwise, BTM_REPEATED_ATTEMPTS is too many attempts. 511 ** 512 ** Returns None 513 ** 514 *******************************************************************************/ 515 BTM_API extern void BTM_SecurityGrant(BD_ADDR bd_addr, UINT8 res); 516 517 /******************************************************************************* 518 ** 519 ** Function BTM_BlePasskeyReply 520 ** 521 ** Description This function is called after Security Manager submitted 522 ** passkey request to the application. 523 ** 524 ** Parameters: bd_addr - Address of the device for which passkey was requested 525 ** res - result of the operation SMP_SUCCESS if success 526 ** passkey - numeric value in the range of 527 ** BTM_MIN_PASSKEY_VAL(0) - BTM_MAX_PASSKEY_VAL(999999(0xF423F)). 528 ** 529 *******************************************************************************/ 530 BTM_API extern void BTM_BlePasskeyReply (BD_ADDR bd_addr, UINT8 res, UINT32 passkey); 531 532 /******************************************************************************* 533 ** 534 ** Function BTM_LeOobDataReply 535 ** 536 ** Description This function is called to provide the OOB data for 537 ** SMP in response to BTM_LE_OOB_REQ_EVT 538 ** 539 ** Parameters: bd_addr - Address of the peer device 540 ** res - result of the operation SMP_SUCCESS if success 541 ** p_data - simple pairing Randomizer C. 542 ** 543 *******************************************************************************/ 544 BTM_API extern void BTM_BleOobDataReply(BD_ADDR bd_addr, UINT8 res, UINT8 len, UINT8 *p_data); 545 546 547 /******************************************************************************* 548 ** 549 ** Function BTM_BleDataSignature 550 ** 551 ** Description This function is called to sign the data using AES128 CMAC 552 ** algorith. 553 ** 554 ** Parameter bd_addr: target device the data to be signed for. 555 ** p_text: singing data 556 ** len: length of the signing data 557 ** signature: output parameter where data signature is going to 558 ** be stored. 559 ** 560 ** Returns TRUE if signing sucessul, otherwise FALSE. 561 ** 562 *******************************************************************************/ 563 BTM_API extern BOOLEAN BTM_BleDataSignature (BD_ADDR bd_addr, UINT8 *p_text, UINT16 len, 564 BLE_SIGNATURE signature); 565 566 /******************************************************************************* 567 ** 568 ** Function BTM_BleVerifySignature 569 ** 570 ** Description This function is called to verify the data signature 571 ** 572 ** Parameter bd_addr: target device the data to be signed for. 573 ** p_orig: original data before signature. 574 ** len: length of the signing data 575 ** counter: counter used when doing data signing 576 ** p_comp: signature to be compared against. 577 578 ** Returns TRUE if signature verified correctly; otherwise FALSE. 579 ** 580 *******************************************************************************/ 581 BTM_API extern BOOLEAN BTM_BleVerifySignature (BD_ADDR bd_addr, UINT8 *p_orig, 582 UINT16 len, UINT32 counter, 583 UINT8 *p_comp); 584 585 /******************************************************************************* 586 ** 587 ** Function BTM_ReadConnectionAddr 588 ** 589 ** Description This function is called to set the local device random address 590 ** . 591 ** 592 ** Returns void 593 ** 594 *******************************************************************************/ 595 BTM_API extern void BTM_ReadConnectionAddr (BD_ADDR remote_bda, BD_ADDR local_conn_addr, 596 tBLE_ADDR_TYPE *p_addr_type); 597 598 599 600 /******************************************************************************* 601 ** 602 ** Function BTM_ReadRemoteConnectionAddr 603 ** 604 ** Description This function is read the remote device address currently used 605 ** . 606 ** 607 ** Returns void 608 ** 609 *******************************************************************************/ 610 BTM_API extern BOOLEAN BTM_ReadRemoteConnectionAddr(BD_ADDR pseudo_addr, 611 BD_ADDR conn_addr, 612 tBLE_ADDR_TYPE *p_addr_type); 613 614 /******************************************************************************* 615 ** 616 ** Function BTM_BleLoadLocalKeys 617 ** 618 ** Description Local local identity key, encryption root or sign counter. 619 ** 620 ** Parameters: key_type: type of key, can be BTM_BLE_KEY_TYPE_ID, BTM_BLE_KEY_TYPE_ER 621 ** or BTM_BLE_KEY_TYPE_COUNTER. 622 ** p_key: pointer to the key. 623 * 624 ** Returns non2. 625 ** 626 *******************************************************************************/ 627 BTM_API extern void BTM_BleLoadLocalKeys(UINT8 key_type, tBTM_BLE_LOCAL_KEYS *p_key); 628 629 630 /******************************************************************************* 631 ** 632 ** Function BTM_BleSetBgConnType 633 ** 634 ** Description This function is called to set BLE background connection 635 ** procedure type. It can be auto connection, or selective connection. 636 ** 637 ** Parameters conn_type: it can be auto connection, or selective connection. 638 ** p_select_cback: callback function when selective connection procedure 639 ** is being used. 640 ** 641 ** Returns void 642 ** 643 *******************************************************************************/ 644 BTM_API extern BOOLEAN BTM_BleSetBgConnType(tBTM_BLE_CONN_TYPE conn_type, 645 tBTM_BLE_SEL_CBACK *p_select_cback); 646 647 /******************************************************************************* 648 ** 649 ** Function BTM_BleUpdateBgConnDev 650 ** 651 ** Description This function is called to add or remove a device into/from 652 ** background connection procedure. The background connection 653 * procedure is decided by the background connection type, it can be 654 * auto connection, or selective connection. 655 ** 656 ** Parameters add_remove: TRUE to add; FALSE to remove. 657 ** remote_bda: device address to add/remove. 658 ** 659 ** Returns void 660 ** 661 *******************************************************************************/ 662 BTM_API extern BOOLEAN BTM_BleUpdateBgConnDev(BOOLEAN add_remove, BD_ADDR remote_bda); 663 664 665 /******************************************************** 666 ** 667 ** Function BTM_BleSetPrefConnParams 668 ** 669 ** Description Set a peripheral's preferred connection parameters. When 670 ** any of the value does not want to be updated while others 671 ** do, use BTM_BLE_CONN_PARAM_UNDEF for the ones want to 672 ** leave untouched. 673 ** 674 ** Parameters: bd_addr - BD address of the peripheral 675 ** min_conn_int - minimum preferred connection interval 676 ** max_conn_int - maximum preferred connection interval 677 ** slave_latency - preferred slave latency 678 ** supervision_tout - preferred supervision timeout 679 ** 680 ** Returns void 681 ** 682 *******************************************************************************/ 683 BTM_API extern void BTM_BleSetPrefConnParams (BD_ADDR bd_addr, 684 UINT16 min_conn_int, UINT16 max_conn_int, 685 UINT16 slave_latency, UINT16 supervision_tout); 686 687 /****************************************************************************** 688 ** 689 ** Function BTM_BleSetConnScanParams 690 ** 691 ** Description Set scan parameters used in BLE connection request 692 ** 693 ** Parameters: scan_interval - scan interval 694 ** scan_window - scan window 695 ** 696 ** Returns void 697 ** 698 *******************************************************************************/ 699 BTM_API extern void BTM_BleSetConnScanParams (UINT16 scan_interval, UINT16 scan_window); 700 701 /******************************************************************************* 702 ** 703 ** Function BTM_CheckAdvData 704 ** 705 ** Description This function is called to get ADV data for a specific type. 706 ** 707 ** Parameters p_adv - pointer of ADV data 708 ** type - finding ADV data type 709 ** p_length - return the length of ADV data not including type 710 ** 711 ** Returns pointer of ADV data 712 ** 713 *******************************************************************************/ 714 BTM_API extern UINT8 *BTM_CheckAdvData( UINT8 *p_adv, UINT8 type, UINT8 *p_length); 715 716 /******************************************************************************* 717 ** 718 ** Function BTM_ReadDevInfo 719 ** 720 ** Description This function is called to read the device/address type 721 ** of BD address. 722 ** 723 ** Parameter remote_bda: remote device address 724 ** p_dev_type: output parameter to read the device type. 725 ** p_addr_type: output parameter to read the address type. 726 ** 727 *******************************************************************************/ 728 BTM_API extern void BTM_ReadDevInfo (BD_ADDR remote_bda, tBT_DEVICE_TYPE *p_dev_type, 729 tBLE_ADDR_TYPE *p_addr_type); 730 731 /******************************************************************************* 732 ** 733 ** Function BTM_BleBroadcast 734 ** 735 ** Description This function is to start or stop broadcasting. 736 ** 737 ** Parameters start: start or stop broadcasting. 738 ** 739 ** Returns status. 740 ** 741 *******************************************************************************/ 742 BTM_API extern tBTM_STATUS BTM_BleBroadcast(BOOLEAN start); 743 744 /******************************************************************************* 745 ** 746 ** Function BTM_RegisterScanReqEvt 747 ** 748 ** Description This function is called to register a scan request callback 749 ** on the advertiser. 750 ** 751 ** Parameters p_scan_req_cback: scan request callback. If NULL, remove the 752 ** registration. 753 ** 754 ** Returns void 755 ** 756 *******************************************************************************/ 757 BTM_API extern void BTM_RegisterScanReqEvt(tBTM_BLE_SCAN_REQ_CBACK *p_scan_req_cback); 758 759 /******************************************************************************* 760 ** 761 ** Function BTM_BleConfigPrivacy 762 ** 763 ** Description This function is called to enable or disable the privacy in 764 ** the local device. 765 ** 766 ** Parameters enable: TRUE to enable it; FALSE to disable it. 767 ** 768 ** Returns void 769 ** 770 *******************************************************************************/ 771 BTM_API extern void BTM_BleConfigPrivacy(BOOLEAN enable); 772 773 /******************************************************************************* 774 ** 775 ** Function BTM_BleSetConnMode 776 ** 777 ** Description This function is called to set BLE connectable mode for a 778 ** peripheral device. 779 ** 780 ** Parameters directed: is directed connectable mode, or non-directed. 781 ** p_dir_bda: connectable direct initiator's LE device address 782 ** 783 ** Returns void 784 ** 785 *******************************************************************************/ 786 BTM_API extern tBTM_STATUS BTM_BleSetConnMode(BOOLEAN directed); 787 788 /******************************************************************************* 789 ** 790 ** Function BTM_BleTurnOnPrivacyOnRemote 791 ** 792 ** Description This function is called to enable or disable the privacy on the 793 ** remote device. 794 ** 795 ** Parameters bd_addr: remote device address. 796 ** privacy_on: TRUE to enable it; FALSE to disable it. 797 ** 798 ** Returns void 799 ** 800 *******************************************************************************/ 801 BTM_API extern void BTM_BleTurnOnPrivacyOnRemote(BD_ADDR bd_addr, 802 BOOLEAN privacy_on); 803 804 805 /******************************************************************************* 806 ** 807 ** Function BTM_BleUpdateAdvWhitelist 808 ** 809 ** Description Add or remove device from advertising white list 810 ** 811 ** Returns void 812 ** 813 *******************************************************************************/ 814 BTM_API extern BOOLEAN BTM_BleUpdateAdvWhitelist(BOOLEAN add_remove, BD_ADDR emote_bda); 815 816 /******************************************************************************* 817 ** 818 ** Function BTM_BleUpdateAdvFilterPolicy 819 ** 820 ** Description This function update the filter policy of advertiser. 821 ** 822 ** Parameter adv_policy: advertising filter policy 823 ** 824 ** Return void 825 *******************************************************************************/ 826 BTM_API extern void BTM_BleUpdateAdvFilterPolicy(tBTM_BLE_AFP adv_policy); 827 828 /******************************************************************************* 829 ** 830 ** Function BTM_BleReceiverTest 831 ** 832 ** Description This function is called to start the LE Receiver test 833 ** 834 ** Parameter rx_freq - Frequency Range 835 ** p_cmd_cmpl_cback - Command Complete callback 836 ** 837 *******************************************************************************/ 838 void BTM_BleReceiverTest(UINT8 rx_freq, tBTM_CMPL_CB *p_cmd_cmpl_cback); 839 840 841 /******************************************************************************* 842 ** 843 ** Function BTM_BleTransmitterTest 844 ** 845 ** Description This function is called to start the LE Transmitter test 846 ** 847 ** Parameter tx_freq - Frequency Range 848 ** test_data_len - Length in bytes of payload data in each packet 849 ** packet_payload - Pattern to use in the payload 850 ** p_cmd_cmpl_cback - Command Complete callback 851 ** 852 *******************************************************************************/ 853 void BTM_BleTransmitterTest(UINT8 tx_freq, UINT8 test_data_len, 854 UINT8 packet_payload, tBTM_CMPL_CB *p_cmd_cmpl_cback); 855 856 /******************************************************************************* 857 ** 858 ** Function BTM_BleTestEnd 859 ** 860 ** Description This function is called to stop the in-progress TX or RX test 861 ** 862 ** Parameter p_cmd_cmpl_cback - Command complete callback 863 ** 864 *******************************************************************************/ 865 void BTM_BleTestEnd(tBTM_CMPL_CB *p_cmd_cmpl_cback); 866 #ifdef __cplusplus 867 } 868 #endif 869 870 #endif 871
