Home | History | Annotate | Download | only in mtd
      1 /*
      2  * $Id: mtd-abi.h,v 1.13 2005/11/07 11:14:56 gleixner Exp $
      3  *
      4  * Portions of MTD ABI definition which are shared by kernel and user space
      5  */
      6 
      7 #ifndef __MTD_ABI_H__
      8 #define __MTD_ABI_H__
      9 
     10 struct erase_info_user {
     11 	uint32_t start;
     12 	uint32_t length;
     13 };
     14 
     15 struct mtd_oob_buf {
     16 	uint32_t start;
     17 	uint32_t length;
     18 	unsigned char __user *ptr;
     19 };
     20 
     21 #define MTD_ABSENT		0
     22 #define MTD_RAM			1
     23 #define MTD_ROM			2
     24 #define MTD_NORFLASH		3
     25 #define MTD_NANDFLASH		4
     26 #define MTD_DATAFLASH		6
     27 
     28 #define MTD_WRITEABLE		0x400	/* Device is writeable */
     29 #define MTD_BIT_WRITEABLE	0x800	/* Single bits can be flipped */
     30 #define MTD_NO_ERASE		0x1000	/* No erase necessary */
     31 #define MTD_STUPID_LOCK		0x2000	/* Always locked after reset */
     32 
     33 // Some common devices / combinations of capabilities
     34 #define MTD_CAP_ROM		0
     35 #define MTD_CAP_RAM		(MTD_WRITEABLE | MTD_BIT_WRITEABLE | MTD_NO_ERASE)
     36 #define MTD_CAP_NORFLASH	(MTD_WRITEABLE | MTD_BIT_WRITEABLE)
     37 #define MTD_CAP_NANDFLASH	(MTD_WRITEABLE)
     38 
     39 /* ECC byte placement */
     40 #define MTD_NANDECC_OFF		0	// Switch off ECC (Not recommended)
     41 #define MTD_NANDECC_PLACE	1	// Use the given placement in the structure (YAFFS1 legacy mode)
     42 #define MTD_NANDECC_AUTOPLACE	2	// Use the default placement scheme
     43 #define MTD_NANDECC_PLACEONLY	3	// Use the given placement in the structure (Do not store ecc result on read)
     44 #define MTD_NANDECC_AUTOPL_USR 	4	// Use the given autoplacement scheme rather than using the default
     45 
     46 /* OTP mode selection */
     47 #define MTD_OTP_OFF		0
     48 #define MTD_OTP_FACTORY		1
     49 #define MTD_OTP_USER		2
     50 
     51 struct mtd_info_user {
     52 	uint8_t type;
     53 	uint32_t flags;
     54 	uint32_t size;	 // Total size of the MTD
     55 	uint32_t erasesize;
     56 	uint32_t writesize;
     57 	uint32_t oobsize;   // Amount of OOB data per block (e.g. 16)
     58 	/* The below two fields are obsolete and broken, do not use them
     59 	 * (TODO: remove at some point) */
     60 	uint32_t ecctype;
     61 	uint32_t eccsize;
     62 };
     63 
     64 struct region_info_user {
     65 	uint32_t offset;		/* At which this region starts,
     66 					 * from the beginning of the MTD */
     67 	uint32_t erasesize;		/* For this region */
     68 	uint32_t numblocks;		/* Number of blocks in this region */
     69 	uint32_t regionindex;
     70 };
     71 
     72 struct otp_info {
     73 	uint32_t start;
     74 	uint32_t length;
     75 	uint32_t locked;
     76 };
     77 
     78 #define MEMGETINFO		_IOR('M', 1, struct mtd_info_user)
     79 #define MEMERASE		_IOW('M', 2, struct erase_info_user)
     80 #define MEMWRITEOOB		_IOWR('M', 3, struct mtd_oob_buf)
     81 #define MEMREADOOB		_IOWR('M', 4, struct mtd_oob_buf)
     82 #define MEMLOCK			_IOW('M', 5, struct erase_info_user)
     83 #define MEMUNLOCK		_IOW('M', 6, struct erase_info_user)
     84 #define MEMGETREGIONCOUNT	_IOR('M', 7, int)
     85 #define MEMGETREGIONINFO	_IOWR('M', 8, struct region_info_user)
     86 #define MEMSETOOBSEL		_IOW('M', 9, struct nand_oobinfo)
     87 #define MEMGETOOBSEL		_IOR('M', 10, struct nand_oobinfo)
     88 #define MEMGETBADBLOCK		_IOW('M', 11, loff_t)
     89 #define MEMSETBADBLOCK		_IOW('M', 12, loff_t)
     90 #define OTPSELECT		_IOR('M', 13, int)
     91 #define OTPGETREGIONCOUNT	_IOW('M', 14, int)
     92 #define OTPGETREGIONINFO	_IOW('M', 15, struct otp_info)
     93 #define OTPLOCK			_IOR('M', 16, struct otp_info)
     94 #define ECCGETLAYOUT		_IOR('M', 17, struct nand_ecclayout)
     95 #define ECCGETSTATS		_IOR('M', 18, struct mtd_ecc_stats)
     96 #define MTDFILEMODE		_IO('M', 19)
     97 
     98 /*
     99  * Obsolete legacy interface. Keep it in order not to break userspace
    100  * interfaces
    101  */
    102 struct nand_oobinfo {
    103 	uint32_t useecc;
    104 	uint32_t eccbytes;
    105 	uint32_t oobfree[8][2];
    106 	uint32_t eccpos[32];
    107 };
    108 
    109 struct nand_oobfree {
    110 	uint32_t offset;
    111 	uint32_t length;
    112 };
    113 
    114 #define MTD_MAX_OOBFREE_ENTRIES	8
    115 /*
    116  * ECC layout control structure. Exported to userspace for
    117  * diagnosis and to allow creation of raw images
    118  */
    119 struct nand_ecclayout {
    120 	uint32_t eccbytes;
    121 	uint32_t eccpos[64];
    122 	uint32_t oobavail;
    123 	struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES];
    124 };
    125 
    126 /**
    127  * struct mtd_ecc_stats - error correction stats
    128  *
    129  * @corrected:	number of corrected bits
    130  * @failed:	number of uncorrectable errors
    131  * @badblocks:	number of bad blocks in this partition
    132  * @bbtblocks:	number of blocks reserved for bad block tables
    133  */
    134 struct mtd_ecc_stats {
    135 	uint32_t corrected;
    136 	uint32_t failed;
    137 	uint32_t badblocks;
    138 	uint32_t bbtblocks;
    139 };
    140 
    141 /*
    142  * Read/write file modes for access to MTD
    143  */
    144 enum mtd_file_modes {
    145 	MTD_MODE_NORMAL = MTD_OTP_OFF,
    146 	MTD_MODE_OTP_FACTORY = MTD_OTP_FACTORY,
    147 	MTD_MODE_OTP_USER = MTD_OTP_USER,
    148 	MTD_MODE_RAW,
    149 };
    150 
    151 #endif /* __MTD_ABI_H__ */
    152