1 /* Copyright (c) 2007-2008 CSIRO 2 Copyright (c) 2007-2009 Xiph.Org Foundation 3 Copyright (c) 2008-2012 Gregory Maxwell 4 Written by Jean-Marc Valin and Gregory Maxwell */ 5 /* 6 Redistribution and use in source and binary forms, with or without 7 modification, are permitted provided that the following conditions 8 are met: 9 10 - Redistributions of source code must retain the above copyright 11 notice, this list of conditions and the following disclaimer. 12 13 - Redistributions in binary form must reproduce the above copyright 14 notice, this list of conditions and the following disclaimer in the 15 documentation and/or other materials provided with the distribution. 16 17 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 18 ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 19 LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 20 A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER 21 OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 22 EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 23 PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 24 PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 25 LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 26 NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 27 SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 28 */ 29 30 /** 31 @file opus_custom.h 32 @brief Opus-Custom reference implementation API 33 */ 34 35 #ifndef OPUS_CUSTOM_H 36 #define OPUS_CUSTOM_H 37 38 #include "opus_defines.h" 39 40 #ifdef __cplusplus 41 extern "C" { 42 #endif 43 44 #ifdef CUSTOM_MODES 45 #define OPUS_CUSTOM_EXPORT OPUS_EXPORT 46 #define OPUS_CUSTOM_EXPORT_STATIC OPUS_EXPORT 47 #else 48 #define OPUS_CUSTOM_EXPORT 49 #ifdef CELT_C 50 #define OPUS_CUSTOM_EXPORT_STATIC static inline 51 #else 52 #define OPUS_CUSTOM_EXPORT_STATIC 53 #endif 54 #endif 55 56 /** @defgroup opus_custom Opus Custom 57 * @{ 58 * Opus Custom is an optional part of the Opus specification and 59 * reference implementation which uses a distinct API from the regular 60 * API and supports frame sizes that are not normally supported.\ Use 61 * of Opus Custom is discouraged for all but very special applications 62 * for which a frame size different from 2.5, 5, 10, or 20 ms is needed 63 * (for either complexity or latency reasons) and where interoperability 64 * is less important. 65 * 66 * In addition to the interoperability limitations the use of Opus custom 67 * disables a substantial chunk of the codec and generally lowers the 68 * quality available at a given bitrate. Normally when an application needs 69 * a different frame size from the codec it should buffer to match the 70 * sizes but this adds a small amount of delay which may be important 71 * in some very low latency applications. Some transports (especially 72 * constant rate RF transports) may also work best with frames of 73 * particular durations. 74 * 75 * Libopus only supports custom modes if they are enabled at compile time. 76 * 77 * The Opus Custom API is similar to the regular API but the 78 * @ref opus_encoder_create and @ref opus_decoder_create calls take 79 * an additional mode parameter which is a structure produced by 80 * a call to @ref opus_custom_mode_create. Both the encoder and decoder 81 * must create a mode using the same sample rate (fs) and frame size 82 * (frame size) so these parameters must either be signaled out of band 83 * or fixed in a particular implementation. 84 * 85 * Similar to regular Opus the custom modes support on the fly frame size 86 * switching, but the sizes available depend on the particular frame size in 87 * use. For some initial frame sizes on a single on the fly size is available. 88 */ 89 90 /** Contains the state of an encoder. One encoder state is needed 91 for each stream. It is initialized once at the beginning of the 92 stream. Do *not* re-initialize the state for every frame. 93 @brief Encoder state 94 */ 95 typedef struct OpusCustomEncoder OpusCustomEncoder; 96 97 /** State of the decoder. One decoder state is needed for each stream. 98 It is initialized once at the beginning of the stream. Do *not* 99 re-initialize the state for every frame. 100 @brief Decoder state 101 */ 102 typedef struct OpusCustomDecoder OpusCustomDecoder; 103 104 /** The mode contains all the information necessary to create an 105 encoder. Both the encoder and decoder need to be initialized 106 with exactly the same mode, otherwise the output will be 107 corrupted. 108 @brief Mode configuration 109 */ 110 typedef struct OpusCustomMode OpusCustomMode; 111 112 /** Creates a new mode struct. This will be passed to an encoder or 113 * decoder. The mode MUST NOT BE DESTROYED until the encoders and 114 * decoders that use it are destroyed as well. 115 * @param [in] Fs <tt>int</tt>: Sampling rate (8000 to 96000 Hz) 116 * @param [in] frame_size <tt>int</tt>: Number of samples (per channel) to encode in each 117 * packet (64 - 1024, prime factorization must contain zero or more 2s, 3s, or 5s and no other primes) 118 * @param [out] error <tt>int*</tt>: Returned error code (if NULL, no error will be returned) 119 * @return A newly created mode 120 */ 121 OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT OpusCustomMode *opus_custom_mode_create(opus_int32 Fs, int frame_size, int *error); 122 123 /** Destroys a mode struct. Only call this after all encoders and 124 * decoders using this mode are destroyed as well. 125 * @param [in] mode <tt>OpusCustomMode*</tt>: Mode to be freed. 126 */ 127 OPUS_CUSTOM_EXPORT void opus_custom_mode_destroy(OpusCustomMode *mode); 128 129 /* Encoder */ 130 /** Gets the size of an OpusCustomEncoder structure. 131 * @param [in] mode <tt>OpusCustomMode *</tt>: Mode configuration 132 * @param [in] channels <tt>int</tt>: Number of channels 133 * @returns size 134 */ 135 OPUS_CUSTOM_EXPORT_STATIC OPUS_WARN_UNUSED_RESULT int opus_custom_encoder_get_size( 136 const OpusCustomMode *mode, 137 int channels 138 ) OPUS_ARG_NONNULL(1); 139 140 /** Creates a new encoder state. Each stream needs its own encoder 141 * state (can't be shared across simultaneous streams). 142 * @param [in] mode <tt>OpusCustomMode*</tt>: Contains all the information about the characteristics of 143 * the stream (must be the same characteristics as used for the 144 * decoder) 145 * @param [in] channels <tt>int</tt>: Number of channels 146 * @param [out] error <tt>int*</tt>: Returns an error code 147 * @return Newly created encoder state. 148 */ 149 OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT OpusCustomEncoder *opus_custom_encoder_create( 150 const OpusCustomMode *mode, 151 int channels, 152 int *error 153 ) OPUS_ARG_NONNULL(1); 154 155 /** Initializes a previously allocated encoder state 156 * The memory pointed to by st must be the size returned by opus_custom_encoder_get_size. 157 * This is intended for applications which use their own allocator instead of malloc. 158 * @see opus_custom_encoder_create(),opus_custom_encoder_get_size() 159 * To reset a previously initialized state use the OPUS_RESET_STATE CTL. 160 * @param [in] st <tt>OpusCustomEncoder*</tt>: Encoder state 161 * @param [in] mode <tt>OpusCustomMode *</tt>: Contains all the information about the characteristics of 162 * the stream (must be the same characteristics as used for the 163 * decoder) 164 * @param [in] channels <tt>int</tt>: Number of channels 165 * @return OPUS_OK Success or @ref opus_errorcodes 166 */ 167 OPUS_CUSTOM_EXPORT_STATIC int opus_custom_encoder_init( 168 OpusCustomEncoder *st, 169 const OpusCustomMode *mode, 170 int channels 171 ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2); 172 173 /** Destroys a an encoder state. 174 * @param[in] st <tt>OpusCustomEncoder*</tt>: State to be freed. 175 */ 176 OPUS_CUSTOM_EXPORT void opus_custom_encoder_destroy(OpusCustomEncoder *st); 177 178 /** Encodes a frame of audio. 179 * @param [in] st <tt>OpusCustomEncoder*</tt>: Encoder state 180 * @param [in] pcm <tt>float*</tt>: PCM audio in float format, with a normal range of +/-1.0. 181 * Samples with a range beyond +/-1.0 are supported but will 182 * be clipped by decoders using the integer API and should 183 * only be used if it is known that the far end supports 184 * extended dynamic range. There must be exactly 185 * frame_size samples per channel. 186 * @param [in] frame_size <tt>int</tt>: Number of samples per frame of input signal 187 * @param [out] compressed <tt>char *</tt>: The compressed data is written here. This may not alias pcm and must be at least maxCompressedBytes long. 188 * @param [in] maxCompressedBytes <tt>int</tt>: Maximum number of bytes to use for compressing the frame 189 * (can change from one frame to another) 190 * @return Number of bytes written to "compressed". 191 * If negative, an error has occurred (see error codes). It is IMPORTANT that 192 * the length returned be somehow transmitted to the decoder. Otherwise, no 193 * decoding is possible. 194 */ 195 OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_encode_float( 196 OpusCustomEncoder *st, 197 const float *pcm, 198 int frame_size, 199 unsigned char *compressed, 200 int maxCompressedBytes 201 ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4); 202 203 /** Encodes a frame of audio. 204 * @param [in] st <tt>OpusCustomEncoder*</tt>: Encoder state 205 * @param [in] pcm <tt>opus_int16*</tt>: PCM audio in signed 16-bit format (native endian). 206 * There must be exactly frame_size samples per channel. 207 * @param [in] frame_size <tt>int</tt>: Number of samples per frame of input signal 208 * @param [out] compressed <tt>char *</tt>: The compressed data is written here. This may not alias pcm and must be at least maxCompressedBytes long. 209 * @param [in] maxCompressedBytes <tt>int</tt>: Maximum number of bytes to use for compressing the frame 210 * (can change from one frame to another) 211 * @return Number of bytes written to "compressed". 212 * If negative, an error has occurred (see error codes). It is IMPORTANT that 213 * the length returned be somehow transmitted to the decoder. Otherwise, no 214 * decoding is possible. 215 */ 216 OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_encode( 217 OpusCustomEncoder *st, 218 const opus_int16 *pcm, 219 int frame_size, 220 unsigned char *compressed, 221 int maxCompressedBytes 222 ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4); 223 224 /** Perform a CTL function on an Opus custom encoder. 225 * 226 * Generally the request and subsequent arguments are generated 227 * by a convenience macro. 228 * @see opus_encoderctls 229 */ 230 OPUS_CUSTOM_EXPORT int opus_custom_encoder_ctl(OpusCustomEncoder * OPUS_RESTRICT st, int request, ...) OPUS_ARG_NONNULL(1); 231 232 /* Decoder */ 233 234 /** Gets the size of an OpusCustomDecoder structure. 235 * @param [in] mode <tt>OpusCustomMode *</tt>: Mode configuration 236 * @param [in] channels <tt>int</tt>: Number of channels 237 * @returns size 238 */ 239 OPUS_CUSTOM_EXPORT_STATIC OPUS_WARN_UNUSED_RESULT int opus_custom_decoder_get_size( 240 const OpusCustomMode *mode, 241 int channels 242 ) OPUS_ARG_NONNULL(1); 243 244 /** Creates a new decoder state. Each stream needs its own decoder state (can't 245 * be shared across simultaneous streams). 246 * @param [in] mode <tt>OpusCustomMode</tt>: Contains all the information about the characteristics of the 247 * stream (must be the same characteristics as used for the encoder) 248 * @param [in] channels <tt>int</tt>: Number of channels 249 * @param [out] error <tt>int*</tt>: Returns an error code 250 * @return Newly created decoder state. 251 */ 252 OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT OpusCustomDecoder *opus_custom_decoder_create( 253 const OpusCustomMode *mode, 254 int channels, 255 int *error 256 ) OPUS_ARG_NONNULL(1); 257 258 /** Initializes a previously allocated decoder state 259 * The memory pointed to by st must be the size returned by opus_custom_decoder_get_size. 260 * This is intended for applications which use their own allocator instead of malloc. 261 * @see opus_custom_decoder_create(),opus_custom_decoder_get_size() 262 * To reset a previously initialized state use the OPUS_RESET_STATE CTL. 263 * @param [in] st <tt>OpusCustomDecoder*</tt>: Decoder state 264 * @param [in] mode <tt>OpusCustomMode *</tt>: Contains all the information about the characteristics of 265 * the stream (must be the same characteristics as used for the 266 * encoder) 267 * @param [in] channels <tt>int</tt>: Number of channels 268 * @return OPUS_OK Success or @ref opus_errorcodes 269 */ 270 OPUS_CUSTOM_EXPORT_STATIC int opus_custom_decoder_init( 271 OpusCustomDecoder *st, 272 const OpusCustomMode *mode, 273 int channels 274 ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2); 275 276 /** Destroys a an decoder state. 277 * @param[in] st <tt>OpusCustomDecoder*</tt>: State to be freed. 278 */ 279 OPUS_CUSTOM_EXPORT void opus_custom_decoder_destroy(OpusCustomDecoder *st); 280 281 /** Decode an opus custom frame with floating point output 282 * @param [in] st <tt>OpusCustomDecoder*</tt>: Decoder state 283 * @param [in] data <tt>char*</tt>: Input payload. Use a NULL pointer to indicate packet loss 284 * @param [in] len <tt>int</tt>: Number of bytes in payload 285 * @param [out] pcm <tt>float*</tt>: Output signal (interleaved if 2 channels). length 286 * is frame_size*channels*sizeof(float) 287 * @param [in] frame_size Number of samples per channel of available space in *pcm. 288 * @returns Number of decoded samples or @ref opus_errorcodes 289 */ 290 OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_decode_float( 291 OpusCustomDecoder *st, 292 const unsigned char *data, 293 int len, 294 float *pcm, 295 int frame_size 296 ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4); 297 298 /** Decode an opus custom frame 299 * @param [in] st <tt>OpusCustomDecoder*</tt>: Decoder state 300 * @param [in] data <tt>char*</tt>: Input payload. Use a NULL pointer to indicate packet loss 301 * @param [in] len <tt>int</tt>: Number of bytes in payload 302 * @param [out] pcm <tt>opus_int16*</tt>: Output signal (interleaved if 2 channels). length 303 * is frame_size*channels*sizeof(opus_int16) 304 * @param [in] frame_size Number of samples per channel of available space in *pcm. 305 * @returns Number of decoded samples or @ref opus_errorcodes 306 */ 307 OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_decode( 308 OpusCustomDecoder *st, 309 const unsigned char *data, 310 int len, 311 opus_int16 *pcm, 312 int frame_size 313 ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4); 314 315 /** Perform a CTL function on an Opus custom decoder. 316 * 317 * Generally the request and subsequent arguments are generated 318 * by a convenience macro. 319 * @see opus_genericctls 320 */ 321 OPUS_CUSTOM_EXPORT int opus_custom_decoder_ctl(OpusCustomDecoder * OPUS_RESTRICT st, int request, ...) OPUS_ARG_NONNULL(1); 322 323 /**@}*/ 324 325 #ifdef __cplusplus 326 } 327 #endif 328 329 #endif /* OPUS_CUSTOM_H */ 330