1 /* Portions are Copyright (C) 2011 Google Inc */ 2 /* ***** BEGIN LICENSE BLOCK ***** 3 * Version: MPL 1.1/GPL 2.0/LGPL 2.1 4 * 5 * The contents of this file are subject to the Mozilla Public License Version 6 * 1.1 (the "License"); you may not use this file except in compliance with 7 * the License. You may obtain a copy of the License at 8 * http://www.mozilla.org/MPL/ 9 * 10 * Software distributed under the License is distributed on an "AS IS" basis, 11 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License 12 * for the specific language governing rights and limitations under the 13 * License. 14 * 15 * The Original Code is the Netscape Portable Runtime (NSPR). 16 * 17 * The Initial Developer of the Original Code is 18 * Netscape Communications Corporation. 19 * Portions created by the Initial Developer are Copyright (C) 1998-2000 20 * the Initial Developer. All Rights Reserved. 21 * 22 * Contributor(s): 23 * 24 * Alternatively, the contents of this file may be used under the terms of 25 * either the GNU General Public License Version 2 or later (the "GPL"), or 26 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), 27 * in which case the provisions of the GPL or the LGPL are applicable instead 28 * of those above. If you wish to allow use of your version of this file only 29 * under the terms of either the GPL or the LGPL, and not to allow others to 30 * use your version of this file under the terms of the MPL, indicate your 31 * decision by deleting the provisions above and replace them with the notice 32 * and other provisions required by the GPL or the LGPL. If you do not delete 33 * the provisions above, a recipient may use your version of this file under 34 * the terms of any one of the MPL, the GPL or the LGPL. 35 * 36 * ***** END LICENSE BLOCK ***** */ 37 38 /* 39 *--------------------------------------------------------------------------- 40 * 41 * prtime.h -- 42 * 43 * NSPR date and time functions 44 * CVS revision 3.10 45 * This file contains definitions of NSPR's basic types required by 46 * prtime.cc. These types have been copied over from the following NSPR 47 * files prtime.h, prtypes.h(CVS revision 3.35), prlong.h(CVS revision 3.13) 48 * 49 *--------------------------------------------------------------------------- 50 */ 51 52 #ifndef BASE_PRTIME_H__ 53 #define BASE_PRTIME_H__ 54 55 #include "base/base_export.h" 56 #include "base/third_party/nspr/prtypes.h" 57 58 #define PR_ASSERT DCHECK 59 60 #define LL_I2L(l, i) ((l) = (PRInt64)(i)) 61 #define LL_MUL(r, a, b) ((r) = (a) * (b)) 62 63 /**********************************************************************/ 64 /************************* TYPES AND CONSTANTS ************************/ 65 /**********************************************************************/ 66 67 #define PR_MSEC_PER_SEC 1000UL 68 #define PR_USEC_PER_SEC 1000000UL 69 #define PR_NSEC_PER_SEC 1000000000UL 70 #define PR_USEC_PER_MSEC 1000UL 71 #define PR_NSEC_PER_MSEC 1000000UL 72 73 /* 74 * PRTime -- 75 * 76 * NSPR represents basic time as 64-bit signed integers relative 77 * to midnight (00:00:00), January 1, 1970 Greenwich Mean Time (GMT). 78 * (GMT is also known as Coordinated Universal Time, UTC.) 79 * The units of time are in microseconds. Negative times are allowed 80 * to represent times prior to the January 1970 epoch. Such values are 81 * intended to be exported to other systems or converted to human 82 * readable form. 83 * 84 * Notes on porting: PRTime corresponds to time_t in ANSI C. NSPR 1.0 85 * simply uses PRInt64. 86 */ 87 88 typedef PRInt64 PRTime; 89 90 /* 91 * Time zone and daylight saving time corrections applied to GMT to 92 * obtain the local time of some geographic location 93 */ 94 95 typedef struct PRTimeParameters { 96 PRInt32 tp_gmt_offset; /* the offset from GMT in seconds */ 97 PRInt32 tp_dst_offset; /* contribution of DST in seconds */ 98 } PRTimeParameters; 99 100 /* 101 * PRExplodedTime -- 102 * 103 * Time broken down into human-readable components such as year, month, 104 * day, hour, minute, second, and microsecond. Time zone and daylight 105 * saving time corrections may be applied. If they are applied, the 106 * offsets from the GMT must be saved in the 'tm_params' field so that 107 * all the information is available to reconstruct GMT. 108 * 109 * Notes on porting: PRExplodedTime corrresponds to struct tm in 110 * ANSI C, with the following differences: 111 * - an additional field tm_usec; 112 * - replacing tm_isdst by tm_params; 113 * - the month field is spelled tm_month, not tm_mon; 114 * - we use absolute year, AD, not the year since 1900. 115 * The corresponding type in NSPR 1.0 is called PRTime. Below is 116 * a table of date/time type correspondence in the three APIs: 117 * API time since epoch time in components 118 * ANSI C time_t struct tm 119 * NSPR 1.0 PRInt64 PRTime 120 * NSPR 2.0 PRTime PRExplodedTime 121 */ 122 123 typedef struct PRExplodedTime { 124 PRInt32 tm_usec; /* microseconds past tm_sec (0-99999) */ 125 PRInt32 tm_sec; /* seconds past tm_min (0-61, accomodating 126 up to two leap seconds) */ 127 PRInt32 tm_min; /* minutes past tm_hour (0-59) */ 128 PRInt32 tm_hour; /* hours past tm_day (0-23) */ 129 PRInt32 tm_mday; /* days past tm_mon (1-31, note that it 130 starts from 1) */ 131 PRInt32 tm_month; /* months past tm_year (0-11, Jan = 0) */ 132 PRInt16 tm_year; /* absolute year, AD (note that we do not 133 count from 1900) */ 134 135 PRInt8 tm_wday; /* calculated day of the week 136 (0-6, Sun = 0) */ 137 PRInt16 tm_yday; /* calculated day of the year 138 (0-365, Jan 1 = 0) */ 139 140 PRTimeParameters tm_params; /* time parameters used by conversion */ 141 } PRExplodedTime; 142 143 /* 144 * PRTimeParamFn -- 145 * 146 * A function of PRTimeParamFn type returns the time zone and 147 * daylight saving time corrections for some geographic location, 148 * given the current time in GMT. The input argument gmt should 149 * point to a PRExplodedTime that is in GMT, i.e., whose 150 * tm_params contains all 0's. 151 * 152 * For any time zone other than GMT, the computation is intended to 153 * consist of two steps: 154 * - Figure out the time zone correction, tp_gmt_offset. This number 155 * usually depends on the geographic location only. But it may 156 * also depend on the current time. For example, all of China 157 * is one time zone right now. But this situation may change 158 * in the future. 159 * - Figure out the daylight saving time correction, tp_dst_offset. 160 * This number depends on both the geographic location and the 161 * current time. Most of the DST rules are expressed in local 162 * current time. If so, one should apply the time zone correction 163 * to GMT before applying the DST rules. 164 */ 165 166 typedef PRTimeParameters (PR_CALLBACK *PRTimeParamFn)(const PRExplodedTime *gmt); 167 168 /**********************************************************************/ 169 /****************************** FUNCTIONS *****************************/ 170 /**********************************************************************/ 171 172 NSPR_API(PRTime) 173 PR_ImplodeTime(const PRExplodedTime *exploded); 174 175 /* 176 * Adjust exploded time to normalize field overflows after manipulation. 177 * Note that the following fields of PRExplodedTime should not be 178 * manipulated: 179 * - tm_month and tm_year: because the number of days in a month and 180 * number of days in a year are not constant, it is ambiguous to 181 * manipulate the month and year fields, although one may be tempted 182 * to. For example, what does "a month from January 31st" mean? 183 * - tm_wday and tm_yday: these fields are calculated by NSPR. Users 184 * should treat them as "read-only". 185 */ 186 187 NSPR_API(void) PR_NormalizeTime( 188 PRExplodedTime *exploded, PRTimeParamFn params); 189 190 /**********************************************************************/ 191 /*********************** TIME PARAMETER FUNCTIONS *********************/ 192 /**********************************************************************/ 193 194 /* Time parameters that represent Greenwich Mean Time */ 195 NSPR_API(PRTimeParameters) PR_GMTParameters(const PRExplodedTime *gmt); 196 197 /* 198 * This parses a time/date string into a PRTime 199 * (microseconds after "1-Jan-1970 00:00:00 GMT"). 200 * It returns PR_SUCCESS on success, and PR_FAILURE 201 * if the time/date string can't be parsed. 202 * 203 * Many formats are handled, including: 204 * 205 * 14 Apr 89 03:20:12 206 * 14 Apr 89 03:20 GMT 207 * Fri, 17 Mar 89 4:01:33 208 * Fri, 17 Mar 89 4:01 GMT 209 * Mon Jan 16 16:12 PDT 1989 210 * Mon Jan 16 16:12 +0130 1989 211 * 6 May 1992 16:41-JST (Wednesday) 212 * 22-AUG-1993 10:59:12.82 213 * 22-AUG-1993 10:59pm 214 * 22-AUG-1993 12:59am 215 * 22-AUG-1993 12:59 PM 216 * Friday, August 04, 1995 3:54 PM 217 * 06/21/95 04:24:34 PM 218 * 20/06/95 21:07 219 * 95-06-08 19:32:48 EDT 220 * 221 * If the input string doesn't contain a description of the timezone, 222 * we consult the `default_to_gmt' to decide whether the string should 223 * be interpreted relative to the local time zone (PR_FALSE) or GMT (PR_TRUE). 224 * The correct value for this argument depends on what standard specified 225 * the time string which you are parsing. 226 */ 227 228 /* 229 * This is the only funtion that should be called from outside base, and only 230 * from the unit test. 231 */ 232 233 BASE_EXPORT PRStatus PR_ParseTimeString ( 234 const char *string, 235 PRBool default_to_gmt, 236 PRTime *result); 237 238 #endif // BASE_PRTIME_H__ 239
