1 /****************************************************************************** 2 * 3 * Copyright (C) 2003-2012 Broadcom Corporation 4 * 5 * Licensed under the Apache License, Version 2.0 (the "License"); 6 * you may not use this file except in compliance with the License. 7 * You may obtain a copy of the License at: 8 * 9 * http://www.apache.org/licenses/LICENSE-2.0 10 * 11 * Unless required by applicable law or agreed to in writing, software 12 * distributed under the License is distributed on an "AS IS" BASIS, 13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 14 * See the License for the specific language governing permissions and 15 * limitations under the License. 16 * 17 ******************************************************************************/ 18 #ifndef OBX_API_H 19 #define OBX_API_H 20 #include "bt_target.h" 21 #include "bt_types.h" 22 #include "l2c_api.h" 23 24 /* 18 is 7/OBX_CONN_HDRS_OFFSET + 5/conn id, 2/ssn, 2/srm 2/srm_param */ 25 #define OBX_HDR_OFFSET (18 + L2CAP_MIN_OFFSET) 26 #define OBX_MAX_TRIPLET 3 27 28 #define OBX_MIN_MTU 255 /* per IrOBEX spec */ 29 #define OBX_MAX_MTU (OBX_LRG_DATA_POOL_SIZE - BT_HDR_SIZE - OBX_HDR_OFFSET) 30 31 #define OBX_CONN_ID_SIZE 4 32 #define OBX_PKT_LEN_SIZE 2 33 34 #define OBX_CONN_HDRS_OFFSET 7 35 #define OBX_SESS_HDRS_OFFSET 3 36 #define OBX_DISCON_HDRS_OFFSET 3 37 #define OBX_PUT_HDRS_OFFSET 3 38 #define OBX_GET_HDRS_OFFSET 3 39 #define OBX_SETPATH_REQ_HDRS_OFFSET 5 40 #define OBX_ABORT_HDRS_OFFSET 3 41 #define OBX_ACTION_HDRS_OFFSET 3 42 #define OBX_RESPONSE_HDRS_OFFSET 3 43 44 /* this is not needed if OBX_HDR_OFFSET is 18+ */ 45 #define OBX_MAX_CONN_HDR_EXTRA 8 /* 5/conn id, 2/ssn, 2/srm 2/srm_param - (5/setpath + 5/conn_id - 7/conn) */ 46 47 /* offset for header functions to access fields */ 48 #define OBX_CONNECT_MTU_OFFSET 5 49 #define OBX_SETPATH_FLAG_OFFSET 3 50 51 #define OBX_MAX_NUM_AUTH_TRIPLET 3 52 #define OBX_UNICODE_SIZE 2 /* sizeof(UINT16) */ 53 54 #define OBX_INVALID_HDR_LEN 0xFFFF 55 56 #define OBX_MIN_NONCE_SIZE 4 /* fixed size per IrOBEX spec */ 57 #define OBX_NONCE_SIZE 16 /* fixed size per IrOBEX spec */ 58 #define OBX_DIGEST_SIZE 16 /* fixed size per IrOBEX spec */ 59 #define OBX_MAX_AUTH_KEY_SIZE 16 60 #define OBX_MAX_AUTH_USER_SIZE 20 61 #define OBX_SESSION_ID_SIZE 16 /* fixed size per IrOBEX spec */ 62 #define OBX_SESSION_INFO_SIZE 32 /* OBX_SESSION_ID_SIZE + 4(local nonce) + 4 (connection id) + 4 (timeout) + 2(mtu) + 1(state) + 1(srm) */ 63 #define OBX_SESSION_INFO_NONCE_IDX 16 /* The index to the (local nonce) in session info */ 64 #define OBX_SESSION_INFO_ID_IDX 20 /* The index to the (connection id) in session info */ 65 #define OBX_SESSION_INFO_TO_IDX 24 /* The index to the (timeout) in session info */ 66 #define OBX_SESSION_INFO_MTU_IDX 28 /* The index to peer MTU in session info */ 67 #define OBX_SESSION_INFO_ST_IDX 30 /* The index to sr/cl state in session info */ 68 #define OBX_SESSION_INFO_SRM_IDX 31 /* The index to srm in session info */ 69 #define OBX_TIMEOUT_SIZE 4 70 71 /* handle related definitions */ 72 #define OBX_SESS_SHIFT 8 73 #define OBX_ENC_SESS_HANDLE(oh, os) (((os)<<OBX_SESS_SHIFT)|(oh)) 74 #define OBX_HANDLE_MASK 0xFF 75 #define OBX_SESS_MASK 0x7F00 76 #define OBX_DEC_HANDLE(os) ((os) & OBX_HANDLE_MASK) 77 #define OBX_DEC_SESS_IND(os) ((os & OBX_SESS_MASK)>>OBX_SESS_SHIFT) 78 79 /* Return values for API functions */ 80 enum 81 { 82 OBX_SUCCESS, /* Status is successful. */ 83 OBX_BAD_PARAMS, /* Bad parameter(s). */ 84 OBX_NO_RESOURCES, /* No resources (GKI buffers, control block) */ 85 OBX_BAD_HANDLE /* The OBEX handle is not valid. */ 86 }; 87 typedef UINT8 tOBX_STATUS; 88 89 90 typedef UINT16 tOBX_HANDLE; 91 92 #define OBX_HANDLE_NULL 0 93 94 enum 95 { 96 OBX_PT_PUT, /* Regular Put request */ 97 OBX_PT_DELETE, /* Delete request - a Put request with NO Body or End-of-Body header. */ 98 OBX_PT_CREATE /* Create-Empty request - a Put request with an empty End-of-Body header. */ 99 }; 100 typedef UINT8 tOBX_PUT_TYPE; 101 102 /* SetPath Request Flags - the following definitions can be ORed if both flags are wanted */ 103 #define OBX_SPF_BACKUP 0x01 /* Backup a level before applying name(equivalent to ../) */ 104 #define OBX_SPF_NO_CREATE 0x02 /* Don't create directory if it does not exist, return an error instead. */ 105 typedef UINT8 tOBX_SETPATH_FLAG; 106 107 /* Authentication Challenge Options */ 108 #define OBX_AO_NONE 0x00 /* If this is used in OBX_StartServer and the authenticate 109 * flag is TRUE, the optional Challenge Information (tag 0x01) 110 * will not be sent. */ 111 #define OBX_AO_USR_ID 0x01 /* Set this bit to make the client respond with the user ID. */ 112 typedef UINT8 tOBX_AUTH_OPT; 113 114 /* CHARSET definition for Authentication Challenge Realm */ 115 #define OBX_RCS_ASCII 0x00 /* ASCII */ 116 #define OBX_RCS_8859_1 0x01 /* ISO-8859-1 */ 117 #define OBX_RCS_8859_2 0x02 /* ISO-8859-2 */ 118 #define OBX_RCS_8859_3 0x03 /* ISO-8859-3 */ 119 #define OBX_RCS_8859_4 0x04 /* ISO-8859-4 */ 120 #define OBX_RCS_8859_5 0x05 /* ISO-8859-5 */ 121 #define OBX_RCS_8859_6 0x06 /* ISO-8859-6 */ 122 #define OBX_RCS_8859_7 0x07 /* ISO-8859-7 */ 123 #define OBX_RCS_8859_8 0x08 /* ISO-8859-8 */ 124 #define OBX_RCS_8859_9 0x09 /* ISO-8859-9 */ 125 #define OBX_RCS_UNICODE 0xFF /* Unicode */ 126 typedef UINT8 tOBX_CHARSET; 127 128 typedef struct 129 { 130 UINT8 ssn; /* session sequence number */ 131 BOOLEAN final; /* TRUE, if this is the final packet of this PUT transaction. */ 132 tOBX_PUT_TYPE type; /* The type of PUT request. */ 133 } tOBX_PUT_EVT; 134 135 typedef struct 136 { 137 UINT8 ssn; /* session sequence number */ 138 BOOLEAN final; /* TRUE, if this is the final packet of this GET transaction. */ 139 } tOBX_GET_EVT; 140 141 typedef struct 142 { 143 UINT8 ssn; /* session sequence number */ 144 BD_ADDR peer_addr; /* The peer Bluetooth Address. */ 145 UINT16 mtu; /* The peer MTU. This element is associated with OBX_CONNECT_REQ_EVT and OBX_CONNECT_RSP_EVT. */ 146 tOBX_HANDLE handle; /* the OBX handle returned by OBX_StartServer(), OBX_CreateSession() and OBX_ConnectReq() */ 147 BOOLEAN no_rsp; /* TRUE, when the event is generated as a part of RESUME SESSION */ 148 } tOBX_CONN_EVT; 149 150 /* Session Opcode Definitions: */ 151 #define OBX_SESS_OP_CREATE 0x00 /* Create Session */ 152 #define OBX_SESS_OP_CLOSE 0x01 /* Close Session */ 153 #define OBX_SESS_OP_SUSPEND 0x02 /* Suspend Session */ 154 #define OBX_SESS_OP_RESUME 0x03 /* Resume Session */ 155 #define OBX_SESS_OP_SET_TIME 0x04 /* Set Timeout */ 156 #define OBX_SESS_OP_TRANSPORT 0xFF /* transport dropped */ 157 typedef UINT8 tOBX_SESS_OP; 158 159 /* Session States Definitions for external use: */ 160 enum 161 { 162 OBX_SESS_NONE, /* 0x00 session is not engaged/closed */ 163 OBX_SESS_ACTIVE, /* 0x01 session is active. */ 164 OBX_SESS_SUSPENDED, /* 0x02 session is suspended. */ 165 OBX_SESS_EXT_MAX 166 }; 167 typedef UINT8 tOBX_SESS_ST; 168 169 170 typedef struct 171 { 172 UINT8 ssn; /* session sequence number */ 173 tOBX_SESS_OP sess_op; /* the session op code */ 174 tOBX_SESS_ST sess_st; /* the session state */ 175 BD_ADDR peer_addr; /* The peer Bluetooth Address. */ 176 UINT8 *p_sess_info; /* The session ID and the local nonce for a reliable session, a reference to the location in OBEX control block or NULL */ 177 UINT32 timeout; /* The number of seconds remaining in suspend. 0xffff if infinite. */ 178 UINT32 obj_offset; /* The object offset for resume session. */ 179 UINT8 nssn; /* tne next session sequence number the server expects */ 180 } tOBX_SESS_EVT; 181 182 #define OBX_ACT_COPY 0x00 /* Copy object */ 183 #define OBX_ACT_MOVE 0x01 /* Move/rename object */ 184 #define OBX_ACT_PERMISSION 0x02 /* Set object permission */ 185 typedef UINT8 tOBX_ACTION; 186 187 typedef struct 188 { 189 UINT8 ssn; /* session sequence number */ 190 tOBX_ACTION action; /* The action opcode. */ 191 } tOBX_ACT_EVT; 192 193 typedef struct 194 { 195 UINT8 ssn; /* session sequence number */ 196 tOBX_SETPATH_FLAG flag; /* The set path flags. */ 197 } tOBX_SETPATH_EVT; 198 199 /* permission flags */ 200 #define OBX_PERMISSION_READ 0x01 201 #define OBX_PERMISSION_WRITE 0x02 202 #define OBX_PERMISSION_DELETE 0x04 203 #define OBX_PERMISSION_MODIFY 0x80 204 205 typedef union 206 { 207 UINT8 ssn; /* session sequence number */ 208 tOBX_CONN_EVT conn; /* This element is associated with OBX_CONNECT_REQ_EVT and OBX_CONNECT_RSP_EVT. */ 209 tOBX_SESS_EVT sess; /* This element is associated with OBX_SESSION_RSP_EVT and OBX_SESSION_REQ_EVT. */ 210 tOBX_PUT_EVT put; /* This element is associated with OBX_PUT_REQ_EVT. */ 211 tOBX_SETPATH_EVT sp; /* This element is associated with OBX_SETPATH_REQ_EVT. */ 212 tOBX_ACT_EVT action; /* This element is associated with OBX_ACTION_REQ_EVT */ 213 tOBX_GET_EVT get; /* This element is associated with OBX_GET_REQ_EVT. TRUE, if this is the final packet that contains the OBEX headers for this GET request. */ 214 } tOBX_EVT_PARAM; 215 216 217 enum 218 { 219 OBX_NULL_EVT, 220 /* server events */ 221 OBX_CONNECT_REQ_EVT, /* param = packet MTU */ 222 OBX_SESSION_REQ_EVT, /* A Crease Session or Resume Session request is received by the server. Call OBX_SessionRsp(). */ 223 OBX_DISCONNECT_REQ_EVT, 224 OBX_PUT_REQ_EVT, /* could have param indicate delete or create? */ 225 OBX_GET_REQ_EVT, 226 OBX_SETPATH_REQ_EVT, /* param = flags */ 227 OBX_ABORT_REQ_EVT, 228 OBX_ACTION_REQ_EVT, /* An Action request is received by the server. Call OBX_ActionRsp(). */ 229 230 /* client events */ 231 OBX_CONNECT_RSP_EVT, /* param = packet MTU */ 232 OBX_SESSION_RSP_EVT, /* A response for Create Session or Resume Session is received by the client. The client needs to remember the session id. The session id is to be used in calling OBX_ResumeSession, if the current session is terminated prematurely. */ 233 OBX_DISCONNECT_RSP_EVT, 234 OBX_PUT_RSP_EVT, 235 OBX_GET_RSP_EVT, 236 OBX_SETPATH_RSP_EVT, 237 OBX_ABORT_RSP_EVT, 238 OBX_ACTION_RSP_EVT, /* An Action response is received by the client. */ 239 240 /* common events */ 241 OBX_SESSION_INFO_EVT, /* the session information event to resume the session. */ 242 OBX_CLOSE_IND_EVT, /* when transport goes down; p_pkt = NULL; no response needed */ 243 OBX_TIMEOUT_EVT, /* param = tOBX_EVENT */ 244 OBX_PASSWORD_EVT 245 }; 246 typedef UINT8 tOBX_EVENT; 247 248 /* this is used by the protocol display function only*/ 249 enum 250 { 251 OBX_NULL_DISP, 252 /* server events */ 253 OBX_CONNECT_REQ_DISP, 254 OBX_SESSION_REQ_DISP, 255 OBX_DISCONNECT_REQ_DISP, 256 OBX_PUT_REQ_DISP, 257 OBX_GET_REQ_DISP, 258 OBX_SETPATH_REQ_DISP, 259 OBX_ABORT_REQ_DISP, 260 OBX_ACTION_REQ_DISP, 261 /* client events */ 262 OBX_CONNECT_RSP_DISP, 263 OBX_SESSION_RSP_DISP, 264 OBX_DISCONNECT_RSP_DISP, 265 OBX_PUT_RSP_DISP, 266 OBX_GET_RSP_DISP, 267 OBX_SETPATH_RSP_DISP, 268 OBX_ABORT_RSP_DISP, 269 OBX_ACTION_RSP_DISP, 270 /* common events */ 271 OBX_CLOSE_IND_DISP, 272 OBX_TIMEOUT_DISP, 273 OBX_PASSWORD_DISP 274 }; 275 #define OBX_DISP_IS_RECV 0x80 276 #define OBX_DISP_TYPE_MASK 0x7F 277 278 #define OBX_MAX_EVT OBX_PASSWORD_EVT 279 #define OBX_MAX_OFFSET_IND OBX_ABORT_RSP_EVT /* This is used to access obx_hdr_start_offset */ 280 281 /* 282 ** Define Miscellaneous Constants 283 */ 284 #define OBX_VERSION 0x10 /* Version 1.0 */ 285 #define OBX_CONN_FLAGS 0 /* Connect flags per IrOBEX spec */ 286 #define OBX_SETPATH_CONST 0 /* SetPath Request constants per IrOBEX spec */ 287 #define OBX_INVALID_CONN_ID 0xFFFFFFFF /* invalid connection ID per IrOBEX spec */ 288 #define OBX_INFINITE_TIMEOUT 0xFFFFFFFF 289 290 /* Header Identifier Data Type Constants */ 291 #define OBX_HI_TYPE_MASK 0xC0 /* This mask get the encoding (data type) of the header ID. */ 292 #define OBX_HI_ID_MASK 0x3F /* This mask gets the meaning of the header ID. */ 293 #define OBX_HI_TYPE_UNIC 0x00 /* Null terminated Unicode text */ 294 #define OBX_HI_TYPE_ARRAY 0x40 /* Unstructured octet array (byte sequence) */ 295 #define OBX_HI_TYPE_BYTE 0x80 /* 8-bit integer */ 296 #define OBX_HI_TYPE_INT 0xC0 /* 32-bit integer */ 297 298 /* 299 ** Define OBEX Header Identifiers 300 */ 301 #define OBX_HI_NULL 0 302 #define OBX_HI_COUNT 0xC0 303 #define OBX_HI_NAME 0x01 304 #define OBX_HI_TYPE 0x42 305 #define OBX_HI_LENGTH 0xC3 306 #define OBX_HI_TIME 0x44 307 #define OBX_HI_DESCRIPTION 0x05 308 #define OBX_HI_TARGET 0x46 309 #define OBX_HI_HTTP 0x47 310 #define OBX_HI_BODY 0x48 311 #define OBX_HI_BODY_END 0x49 312 #define OBX_HI_WHO 0x4A 313 #define OBX_HI_CONN_ID 0xCB 314 #define OBX_HI_APP_PARMS 0x4C 315 #define OBX_HI_CHALLENGE 0x4D 316 #define OBX_HI_AUTH_RSP 0x4E 317 #define OBX_HI_CREATOR_ID 0xCF 318 #define OBX_HI_WAN_UUID 0x50 319 #define OBX_HI_OBJ_CLASS 0x51 320 #define OBX_HI_SESSION_PARAM 0x52 321 #define OBX_HI_SESSION_SN 0x93 322 #define OBX_HI_ACTION_ID 0x94 323 #define OBX_HI_DEST_NAME 0x15 324 #define OBX_HI_PERMISSION 0xD6 325 #define OBX_HI_SRM 0x97 326 #define OBX_HI_SRM_PARAM 0x98 327 #define OBX_HI_LO_USER 0x30 328 #define OBX_HI_HI_USER 0x3F 329 330 /* Obex Header Values for the SRM header */ 331 #define OBX_HV_SRM_DISABLE 0x00 /* SRM header value - disable */ 332 #define OBX_HV_SRM_ENABLE 0x01 /* SRM header value - enable */ 333 #define OBX_HV_SRM_IND 0x02 /* SRM header value - indicate support */ 334 335 /* Obex Header Values for the SRM Parameter header */ 336 #define OBX_HV_SRM_PARAM_MORE 0x00 /* SRM Param header value - request additional packet */ 337 #define OBX_HV_SRM_PARAM_WAIT 0x01 /* SRM Param header value - wait for next req/rsp */ 338 #define OBX_HV_SRM_PARAM_COMBO 0x02 /* SRM Param header value - next and wait */ 339 340 #define OBX_TAG_SESS_PARAM_ADDR 0x00 341 #define OBX_TAG_SESS_PARAM_NONCE 0x01 342 #define OBX_TAG_SESS_PARAM_SESS_ID 0x02 343 #define OBX_TAG_SESS_PARAM_NSEQNUM 0x03 344 #define OBX_TAG_SESS_PARAM_TOUT 0x04 345 #define OBX_TAG_SESS_PARAM_SESS_OP 0x05 346 #define OBX_TAG_SESS_PARAM_OBJ_OFF 0x06 347 #define OBX_MAX_SESS_PARAM_TRIP 7 /* max number of TLV for session operations */ 348 349 #define OBX_LEN_SESS_PARAM_SESS_OP 1 350 #define OBX_LEN_SESS_PARAM_OBJ_OFF 4 /* this value varies, so it needs to be verified on the receiving side */ 351 352 /* 353 ** Define OBEX Request Codes 354 */ 355 #define OBX_REQ_CONNECT 0x00 /* need to set final bit */ 356 #define OBX_REQ_DISCONNECT 0x01 /* need to set final bit */ 357 #define OBX_REQ_PUT 0x02 358 #define OBX_REQ_GET 0x03 359 #define OBX_REQ_SETPATH 0x05 /* need to set final bit */ 360 #define OBX_REQ_ACTION 0x06 361 #define OBX_REQ_SESSION 0x07 /* need to set final bit */ 362 #define OBX_REQ_ABORT 0x7F /* need to set final bit */ 363 #define OBX_FINAL 0x80 364 365 /* OBEX response code as defined in IrOBEX spec. version 1.2 */ 366 #define OBX_RSP_DEFAULT 0x00 367 #define OBX_RSP_FAILED 0x08 /* OBEX failed - not from spec */ 368 #define OBX_RSP_CONTINUE 0x10 /* Continue */ 369 #define OBX_RSP_OK 0x20 /* OK, Success */ 370 #define OBX_RSP_CREATED 0x21 /* Created */ 371 #define OBX_RSP_ACCEPTED 0x22 /* Accepted */ 372 #define OBX_RSP_NON_AUTH_INFO 0x23 /* Non-Authoritative Information */ 373 #define OBX_RSP_NO_CONTENT 0x24 /* No Content */ 374 #define OBX_RSP_RESET_CONTENT 0x25 /* Reset Content */ 375 #define OBX_RSP_PART_CONTENT 0x26 /* Partial Content */ 376 #define OBX_RSP_MULTI_CHOICES 0x30 /* Multiple Choices */ 377 #define OBX_RSP_MVD_PERM 0x31 /* Moved Permanently */ 378 #define OBX_RSP_MVD_TEMP 0x32 /* Moved temporarily */ 379 #define OBX_RSP_SEE_OTHER 0x33 /* See Other */ 380 #define OBX_RSP_NOT_MODIFIED 0x34 /* Not modified */ 381 #define OBX_RSP_USE_PROXY 0x35 /* Use Proxy */ 382 #define OBX_RSP_BAD_REQUEST 0x40 /* Bad Request - server couldn't understand request */ 383 #define OBX_RSP_UNAUTHORIZED 0x41 /* Unauthorized */ 384 #define OBX_RSP_PAYMENT_REQD 0x42 /* Payment required */ 385 #define OBX_RSP_FORBIDDEN 0x43 /* Forbidden - operation is understood but refused */ 386 #define OBX_RSP_NOT_FOUND 0x44 /* Not Found */ 387 #define OBX_RSP_NOT_ALLOWED 0x45 /* Method not allowed */ 388 #define OBX_RSP_NOT_ACCEPTABLE 0x46 /* Not Acceptable */ 389 #define OBX_RSP_PROXY_AUTH_REQD 0x47 /* Proxy Authentication required */ 390 #define OBX_RSP_REQUEST_TIMEOUT 0x48 /* Request Time Out */ 391 #define OBX_RSP_CONFLICT 0x49 /* Conflict */ 392 #define OBX_RSP_GONE 0x4A /* Gone */ 393 #define OBX_RSP_LENGTH_REQD 0x4B /* Length Required */ 394 #define OBX_RSP_PRECONDTN_FAILED 0x4C /* Precondition failed */ 395 #define OBX_RSP_REQ_ENT_2_LARGE 0x4D /* Requested entity too large */ 396 #define OBX_RSP_REQ_URL_2_LARGE 0x4E /* Request URL too large */ 397 #define OBX_RSP_UNSUPTD_TYPE 0x4F /* Unsupported media type */ 398 #define OBX_RSP_INTRNL_SRVR_ERR 0x50 /* Internal Server Error */ 399 #define OBX_RSP_NOT_IMPLEMENTED 0x51 /* Not Implemented */ 400 #define OBX_RSP_BAD_GATEWAY 0x52 /* Bad Gateway */ 401 #define OBX_RSP_SERVICE_UNAVL 0x53 /* Service Unavailable */ 402 #define OBX_RSP_GATEWAY_TIMEOUT 0x54 /* Gateway Timeout */ 403 #define OBX_RSP_HTTP_VER_NOT_SUPTD 0x55 /* HTTP version not supported */ 404 #define OBX_RSP_DATABASE_FULL 0x60 /* Database Full */ 405 #define OBX_RSP_DATABASE_LOCKED 0x61 /* Database Locked */ 406 407 #define OBX_MAX_OK_RSP OBX_RSP_PART_CONTENT 408 409 typedef UINT8 tOBX_RSP_CODE; 410 411 /* tags for authentication triplet */ 412 #define OBX_NONCE_CHLNG_TAG 0 413 #define OBX_OPTIONS_CHLNG_TAG 1 414 #define OBX_REALM_CHLNG_TAG 2 415 416 #define OBX_DIGEST_RSP_TAG 0 417 #define OBX_USERID_RSP_TAG 1 418 #define OBX_NONCE_RSP_TAG 2 419 420 typedef struct 421 { 422 UINT8 tag; 423 UINT8 len; 424 UINT8 *p_array; 425 } tOBX_TRIPLET; 426 427 /* Server Callback type: */ 428 typedef void (tOBX_SR_CBACK) (tOBX_HANDLE shandle, tOBX_EVENT event, tOBX_EVT_PARAM param, BT_HDR *p_pkt); 429 /* Client Callback type: */ 430 typedef void (tOBX_CL_CBACK) (tOBX_HANDLE handle, tOBX_EVENT event, UINT8 rsp_code, tOBX_EVT_PARAM param, BT_HDR *p_pkt); 431 432 433 typedef struct 434 { 435 UINT16 len; /* Length of target header. */ 436 UINT8 target[OBX_MAX_TARGET_LEN]; /* The byte sequence that describes the target header. */ 437 } tOBX_TARGET; 438 439 440 typedef struct 441 { 442 tOBX_TARGET *p_target; 443 tOBX_SR_CBACK *p_cback; 444 UINT16 mtu; 445 UINT8 scn; /* The RFCOMM SCN number that this server listens for incoming requests. 0, if do not wish to listen to connection from RFCOMM. */ 446 BOOLEAN authenticate; 447 UINT8 auth_option; 448 UINT8 realm_charset; 449 UINT8 *p_realm; 450 UINT8 realm_len; 451 UINT8 max_sessions; 452 BOOLEAN get_nonf; /* report GET non-final request event. If FALSE, GET response is sent automatically */ 453 UINT16 psm; /* The L2CAP PSM number that this server listens for incoming requests. 0, if do not wish to listen to connection from L2CAP. */ 454 UINT32 nonce; /* This is converted to UINT8[16] internally before adding to the OBEX header. This value is copied to the server control block and is increased after each use. 0, if only legacy OBEX (unreliable) session is desired. */ 455 BOOLEAN srm; /* TRUE, to support single response mode. */ 456 UINT8 max_suspend; /* Max number of suspended session. must be less than OBX_MAX_SUSPEND_SESSIONS. ignored, if nonce is 0 */ 457 } tOBX_StartParams; 458 459 460 461 462 463 /***************************************************************************** 464 ** External Function Declarations 465 *****************************************************************************/ 466 #ifdef __cplusplus 467 extern "C" 468 { 469 #endif 470 471 /******************************************************************************* 472 ** 473 ** Function OBX_Init 474 ** 475 ** Description This function is called to initialize the control block for this 476 ** layer. It must be called before accessing any other of its API 477 ** functions. It is typically called once during the start up of 478 ** the stack. 479 ** 480 ** Returns void. 481 ** 482 *******************************************************************************/ 483 OBX_API extern void OBX_Init(void); 484 485 /******************************************************************************* 486 ** 487 ** Function OBX_SetTraceLevel 488 ** 489 ** Description This function sets the debug trace level for OBX. 490 ** If 0xff is passed, the current trace level is returned. 491 ** 492 ** Input Parameters: 493 ** level: The level to set the OBX tracing to: 494 ** 0xff-returns the current setting. 495 ** 0-turns off tracing. 496 ** >= 1-Errors. 497 ** >= 2-Warnings. 498 ** >= 3-APIs. 499 ** >= 4-Events. 500 ** >= 5-Debug. 501 ** 502 ** Returns The new trace level or current trace level if 503 ** the input parameter is 0xff. 504 ** 505 *******************************************************************************/ 506 OBX_API extern UINT8 OBX_SetTraceLevel (UINT8 level); 507 508 /******************************************************************************* 509 ** Function OBX_HandleToMtu 510 ** 511 ** Description Given an OBEX handle, return the associated peer MTU. 512 ** 513 ** Returns MTU. 514 ** 515 *******************************************************************************/ 516 OBX_API extern UINT16 OBX_HandleToMtu(tOBX_HANDLE handle); 517 518 /* Server API's: */ 519 /******************************************************************************* 520 ** 521 ** Function OBX_StartServer 522 ** 523 ** Description This function is to register a server entity to OBEX. 524 ** 525 ** Returns OBX_SUCCESS, if successful. 526 ** OBX_NO_RESOURCES, if OBX does not have resources. 527 ** 528 *******************************************************************************/ 529 OBX_API extern tOBX_STATUS OBX_StartServer(tOBX_StartParams *p_params, tOBX_HANDLE *p_handle); 530 531 /******************************************************************************* 532 ** 533 ** Function OBX_StopServer 534 ** 535 ** Description This function is to stop this OBEX server from receiving any 536 ** more incoming requests. 537 ** 538 ** Returns OBX_SUCCESS, if successful. 539 ** OBX_BAD_HANDLE, if the handle is not valid. 540 ** 541 *******************************************************************************/ 542 OBX_API extern tOBX_STATUS OBX_StopServer(tOBX_HANDLE handle); 543 544 /******************************************************************************* 545 ** 546 ** Function OBX_AddSuspendedSession 547 ** 548 ** Description This function is to add the session information for a previously 549 ** suspended reliable session to the server control block 550 ** 551 ** Returns OBX_SUCCESS, if successful. 552 ** OBX_BAD_HANDLE, if the handle is not valid. 553 ** 554 *******************************************************************************/ 555 OBX_API extern tOBX_STATUS OBX_AddSuspendedSession(tOBX_HANDLE shandle, BD_ADDR peer_addr, UINT8 *p_sess_info, 556 UINT32 timeout, UINT8 ssn, UINT32 offset); 557 558 /******************************************************************************* 559 ** 560 ** Function OBX_ConnectRsp 561 ** 562 ** Description This function is called to send the response to a Connect 563 ** Request from an OBEX client. 564 ** 565 ** Returns OBX_SUCCESS, if successful. 566 ** OBX_BAD_HANDLE, if the handle is not valid. 567 ** 568 *******************************************************************************/ 569 OBX_API extern tOBX_STATUS OBX_ConnectRsp(tOBX_HANDLE shandle, UINT8 rsp_code, BT_HDR *p_pkt); 570 571 /******************************************************************************* 572 ** 573 ** Function OBX_SessionRsp 574 ** 575 ** Description This function is called to respond to a request to create a reliable session. 576 ** 577 ** 578 ** Returns OBX_SUCCESS, if successful. 579 ** OBX_BAD_HANDLE, if the handle is not valid. 580 ** 581 *******************************************************************************/ 582 OBX_API extern tOBX_STATUS OBX_SessionRsp(tOBX_HANDLE shandle, UINT8 rsp_code, 583 UINT8 ssn, UINT32 offset, BT_HDR *p_pkt); 584 585 /******************************************************************************* 586 ** 587 ** Function OBX_SetPathRsp 588 ** 589 ** Description This function is called to send the response to a Set Path 590 ** Request from an OBEX client. 591 ** 592 ** Returns OBX_SUCCESS, if successful. 593 ** OBX_BAD_HANDLE, if the handle is not valid. 594 ** 595 *******************************************************************************/ 596 OBX_API extern tOBX_STATUS OBX_SetPathRsp(tOBX_HANDLE shandle, UINT8 rsp_code, BT_HDR *p_pkt); 597 598 /******************************************************************************* 599 ** 600 ** Function OBX_PutRsp 601 ** 602 ** Description This function is called to send the response to a Put 603 ** Request from an OBEX client. 604 ** 605 ** Returns OBX_SUCCESS, if successful. 606 ** OBX_BAD_HANDLE, if the handle is not valid. 607 ** 608 *******************************************************************************/ 609 OBX_API extern tOBX_STATUS OBX_PutRsp(tOBX_HANDLE shandle, UINT8 rsp_code, BT_HDR *p_pkt); 610 611 /******************************************************************************* 612 ** 613 ** Function OBX_GetRsp 614 ** 615 ** Description This function is called to send the response to a Get 616 ** Request from an OBEX client. 617 ** 618 ** Returns OBX_SUCCESS, if successful. 619 ** OBX_BAD_HANDLE, if the handle is not valid. 620 ** 621 *******************************************************************************/ 622 OBX_API extern tOBX_STATUS OBX_GetRsp(tOBX_HANDLE shandle, UINT8 rsp_code, BT_HDR *p_pkt); 623 624 /******************************************************************************* 625 ** 626 ** Function OBX_AbortRsp 627 ** 628 ** Description This function is called to send the response to an Abort 629 ** Request from an OBEX client. 630 ** 631 ** Returns OBX_SUCCESS, if successful. 632 ** OBX_BAD_HANDLE, if the handle is not valid. 633 ** 634 *******************************************************************************/ 635 OBX_API extern tOBX_STATUS OBX_AbortRsp(tOBX_HANDLE shandle, UINT8 rsp_code, BT_HDR *p_pkt); 636 637 /******************************************************************************* 638 ** 639 ** Function OBX_ActionRsp 640 ** 641 ** Description This function is called to respond to an Action command Request 642 ** from an OBEX client. 643 ** 644 ** Returns OBX_SUCCESS, if successful. 645 ** OBX_BAD_HANDLE, if the handle is not valid. 646 ** 647 *******************************************************************************/ 648 OBX_API extern tOBX_STATUS OBX_ActionRsp(tOBX_HANDLE shandle, UINT8 rsp_code, BT_HDR *p_pkt); 649 650 /******************************************************************************* 651 ** 652 ** Function OBX_DisconnectRsp 653 ** 654 ** Description This function is called to send the response to a Disconnect 655 ** Request from an OBEX client. 656 ** This function can also be used to force close the transport 657 ** to a connected client. 658 ** 659 ** Returns OBX_SUCCESS, if successful. 660 ** OBX_BAD_HANDLE, if the handle is not valid. 661 ** 662 *******************************************************************************/ 663 OBX_API extern tOBX_STATUS OBX_DisconnectRsp(tOBX_HANDLE shandle, UINT8 rsp_code, BT_HDR *p_pkt); 664 665 /******************************************************************************* 666 ** 667 ** Function OBX_Password 668 ** 669 ** Description This function is called to respond to an OBX_PASSWORD_EVT event. 670 ** 671 ** Returns OBX_SUCCESS, if successful. 672 ** OBX_NO_RESOURCES, if OBX does not resources 673 ** 674 *******************************************************************************/ 675 OBX_API extern tOBX_STATUS OBX_Password(tOBX_HANDLE shandle, UINT8 *p_password, UINT8 password_len, 676 UINT8 *p_userid, UINT8 userid_len); 677 678 /******************************************************************************* 679 ** 680 ** Function OBX_GetPeerAddr 681 ** 682 ** Description This function is called to learn the Bluetooth address of the 683 ** connected device. 684 ** 685 ** Returns L2CAP channel ID. 686 ** 687 *******************************************************************************/ 688 OBX_API extern UINT16 OBX_GetPeerAddr(tOBX_HANDLE shandle, BD_ADDR bd_addr); 689 690 /******************************************************************************* 691 ** 692 ** Function OBX_GetPortHandle 693 ** 694 ** Description This function is called to get the RFCOMM port handle for the obex connection. 695 ** 696 ** 697 ** Returns OBX_SUCCESS, if successful. 698 ** OBX_NO_RESOURCES, if no existing connection. 699 ** OBX_BAD_HANDLE, if the handle is not valid. 700 ** 701 *******************************************************************************/ 702 OBX_API extern tOBX_STATUS OBX_GetPortHandle(tOBX_HANDLE handle, UINT16 *port_handle); 703 704 /* Client API's: */ 705 /******************************************************************************* 706 ** 707 ** Function OBX_ConnectReq 708 ** 709 ** Description This function registers a client entity to OBEX and sends a 710 ** CONNECT request to the server specified by the API parameters. 711 ** 712 ** Returns OBX_SUCCESS, if successful. 713 ** OBX_NO_RESOURCES, if OBX does not resources 714 ** 715 *******************************************************************************/ 716 OBX_API extern tOBX_STATUS OBX_ConnectReq(BD_ADDR bd_addr, UINT8 scn, UINT16 mtu, 717 tOBX_CL_CBACK *p_cback, tOBX_HANDLE *p_handle, BT_HDR *p_pkt); 718 719 /******************************************************************************* 720 ** 721 ** Function OBX_AllocSession 722 ** 723 ** Description This function registers a client entity to OBEX. 724 ** If p_session_id is not NULL, it tries to find an suspended session 725 ** with matching session_id. 726 ** If scn is not 0, it allocates a control block for this new session. 727 ** Otherwise, it allocates a control block for the given PSM. 728 ** The associated virtual PSM assigned by L2CAP is returned in p_psm 729 ** The allocated OBEX handle is returned in p_handle. 730 ** 731 ** Returns OBX_SUCCESS, if successful. 732 ** OBX_NO_RESOURCES, if OBX does not resources 733 ** 734 *******************************************************************************/ 735 OBX_API extern tOBX_STATUS OBX_AllocSession (UINT8 *p_session_info, UINT8 scn, UINT16 *p_psm, 736 tOBX_CL_CBACK *p_cback, tOBX_HANDLE *p_handle); 737 738 /******************************************************************************* 739 ** 740 ** Function OBX_CreateSession 741 ** 742 ** Description This function registers a client entity to OBEX. 743 ** It may send a CreateSession request and wait for CreateSession response. 744 ** It sends a CONNECT request to the server specified by the API parameters. 745 ** 746 ** Returns OBX_SUCCESS, if successful. 747 ** OBX_NO_RESOURCES, if OBX does not resources 748 ** 749 *******************************************************************************/ 750 OBX_API extern tOBX_STATUS OBX_CreateSession (BD_ADDR bd_addr, UINT16 mtu, BOOLEAN srm, UINT32 nonce, 751 tOBX_HANDLE handle, BT_HDR *p_pkt); 752 753 /******************************************************************************* 754 ** 755 ** Function OBX_ResumeSession 756 ** 757 ** Description This function registers a client entity to OBEX and resumes 758 ** a previously interrupted reliable session. 759 ** 760 ** Returns OBX_SUCCESS, if successful. 761 ** OBX_NO_RESOURCES, if OBX does not resources 762 ** 763 *******************************************************************************/ 764 OBX_API extern tOBX_STATUS OBX_ResumeSession (BD_ADDR bd_addr, UINT8 ssn, UINT32 offset, tOBX_HANDLE handle); 765 766 /******************************************************************************* 767 ** 768 ** Function OBX_SessionReq 769 ** 770 ** Description This function is used to Suspend, Resume, or Close a session. 771 ** For Resume: this function registers a client entity to OBEX and resumes 772 ** a previously interrupted reliable session. 773 ** 774 ** Returns OBX_SUCCESS, if successful. 775 ** OBX_NO_RESOURCES, if OBX does not resources 776 ** 777 *******************************************************************************/ 778 OBX_API extern tOBX_STATUS OBX_SessionReq (tOBX_HANDLE handle, tOBX_SESS_OP opcode, UINT32 timeout); 779 780 /******************************************************************************* 781 ** 782 ** Function OBX_SetPathReq 783 ** 784 ** Description This function sends a Set Path request to the connected server. 785 ** 786 ** Returns OBX_SUCCESS, if successful. 787 ** OBX_BAD_HANDLE, if the handle is not valid. 788 ** 789 *******************************************************************************/ 790 OBX_API extern tOBX_STATUS OBX_SetPathReq(tOBX_HANDLE handle, UINT8 flags, BT_HDR *p_pkt); 791 792 /******************************************************************************* 793 ** 794 ** Function OBX_PutReq 795 ** 796 ** Description This function sends a Put request to the connected server. 797 ** 798 ** Returns OBX_SUCCESS, if successful. 799 ** OBX_BAD_HANDLE, if the handle is not valid. 800 ** 801 *******************************************************************************/ 802 OBX_API extern tOBX_STATUS OBX_PutReq(tOBX_HANDLE handle, BOOLEAN final, BT_HDR *p_pkt); 803 804 /******************************************************************************* 805 ** 806 ** Function OBX_GetReq 807 ** 808 ** Description This function sends a Get request to the connected server. 809 ** 810 ** Returns OBX_SUCCESS, if successful. 811 ** OBX_BAD_HANDLE, if the handle is not valid. 812 ** 813 *******************************************************************************/ 814 OBX_API extern tOBX_STATUS OBX_GetReq(tOBX_HANDLE handle, BOOLEAN final, BT_HDR *p_pkt); 815 816 /******************************************************************************* 817 ** 818 ** Function OBX_AbortReq 819 ** 820 ** Description This function sends an Abort request to the connected server. 821 ** 822 ** Returns OBX_SUCCESS, if successful. 823 ** OBX_BAD_HANDLE, if the handle is not valid. 824 ** 825 *******************************************************************************/ 826 OBX_API extern tOBX_STATUS OBX_AbortReq(tOBX_HANDLE handle, BT_HDR *p_pkt); 827 828 /******************************************************************************* 829 ** 830 ** Function OBX_DisconnectReq 831 ** 832 ** Description This function sends a Disconnect request to the connected server. 833 ** 834 ** Returns OBX_SUCCESS, if successful. 835 ** OBX_BAD_HANDLE, if the handle is not valid. 836 ** 837 *******************************************************************************/ 838 OBX_API extern tOBX_STATUS OBX_DisconnectReq(tOBX_HANDLE handle, BT_HDR *p_pkt); 839 840 /******************************************************************************* 841 ** 842 ** Function OBX_ActionReq 843 ** 844 ** Description This function sends a Action request to the connected server. 845 ** The Name Header and DestName Header must be in p_pkt for 846 ** the Copy and Move Object action. 847 ** The Name header and Permission Header must be in p_pkt for 848 ** the Set Object Permission action. 849 ** 850 ** Returns OBX_SUCCESS, if successful. 851 ** OBX_BAD_HANDLE, if the handle is not valid. 852 ** 853 *******************************************************************************/ 854 OBX_API extern tOBX_STATUS OBX_ActionReq(tOBX_HANDLE handle, tOBX_ACTION action_id, BT_HDR *p_pkt); 855 856 /******************************************************************************* 857 ** 858 ** Function OBX_AuthResponse 859 ** 860 ** Description This function is called to respond to an OBX_PASSWORD_EVT event. 861 ** 862 ** Returns OBX_SUCCESS, if successful. 863 ** OBX_NO_RESOURCES, if OBX does not resources 864 ** 865 *******************************************************************************/ 866 OBX_API extern tOBX_STATUS OBX_AuthResponse(tOBX_HANDLE handle, 867 UINT8 *p_password, UINT8 password_len, 868 UINT8 *p_userid, UINT8 userid_len, 869 BOOLEAN authenticate); 870 871 872 /******************************************************************************* 873 ** 874 ** Function OBX_HdrInit 875 ** 876 ** Description This function is called to initialize an OBEX packet. This 877 ** function takes a GKI buffer and sets the offset in BT_HDR as 878 ** OBEX_HDR_OFFSET, the len as 0. The layer_specific is set to the 879 ** length still available. This function compares the given 880 ** (pkt_size - sizeof(BT_HDR)) with the peer MTU to get the lesser 881 ** of the two and set the layer_specific to 882 ** (lesser_size - OBEX_HDR_OFFSET). 883 ** If composing a header for the CONNECT request (there is no 884 ** client handle yet), use OBX_HANDLE_NULL as the handle. 885 ** 886 ** Returns BT_HDR *. 887 ** 888 *******************************************************************************/ 889 OBX_API extern BT_HDR * OBX_HdrInit(tOBX_HANDLE handle, UINT16 pkt_size); 890 891 /******************************************************************************* 892 ** 893 ** Function OBX_AddNameHdr 894 ** 895 ** Description This function is called to add an OBEX Name header 896 ** to an OBEX packet. 897 ** 898 ** Returns TRUE, if the header is added successfully. 899 ** FALSE, if the operation failed. p_pkt is not altered. 900 ** 901 *******************************************************************************/ 902 OBX_API extern BOOLEAN OBX_AddNameHdr(BT_HDR *p_pkt, UINT16 *p_name, UINT16 len); 903 904 /******************************************************************************* 905 ** 906 ** Function OBX_CharToWchar 907 ** 908 ** Description This function is called to convert ASCII to Unicode (UINT16). 909 ** 910 ** Returns the length. 911 ** 912 *******************************************************************************/ 913 OBX_API extern UINT16 OBX_CharToWchar (UINT16 *w_str, char* a_str, UINT16 w_size); 914 915 /******************************************************************************* 916 ** 917 ** Function OBX_AddAsciiNameHdr 918 ** 919 ** Description This function is called to add an OBEX Name header 920 ** to an OBEX packet. 921 ** 922 ** Returns TRUE, if the header is added successfully. 923 ** FALSE, if the operation failed. p_pkt is not altered. 924 ** 925 *******************************************************************************/ 926 OBX_API extern BOOLEAN OBX_AddAsciiNameHdr(BT_HDR *p_pkt, char *p_name); 927 928 /******************************************************************************* 929 ** 930 ** Function OBX_AddTypeHdr 931 ** 932 ** Description This function is called to add an OBEX Type header 933 ** to an OBEX packet. 934 ** 935 ** Returns TRUE, if the header is added successfully. 936 ** FALSE, if the operation failed. p_pkt is not altered. 937 ** 938 *******************************************************************************/ 939 OBX_API extern BOOLEAN OBX_AddTypeHdr(BT_HDR *p_pkt, char *p_type); 940 941 /******************************************************************************* 942 ** 943 ** Function OBX_AddLengthHdr 944 ** 945 ** Description This function is called to add an OBEX Length header to an OBEX 946 ** packet. The Length header describes the total length in bytes of 947 ** the object. 948 ** 949 ** Returns TRUE, if the header is added successfully. 950 ** FALSE, if the operation failed. p_pkt is not altered. 951 ** 952 *******************************************************************************/ 953 OBX_API extern BOOLEAN OBX_AddLengthHdr(BT_HDR *p_pkt, UINT32 len); 954 955 /******************************************************************************* 956 ** 957 ** Function OBX_AddTimeHdr 958 ** 959 ** Description This function is called to add an OBEX Time header 960 ** to an OBEX packet. 961 ** 962 ** Returns TRUE, if the header is added successfully. 963 ** FALSE, if the operation failed. p_pkt is not altered. 964 ** 965 *******************************************************************************/ 966 OBX_API extern BOOLEAN OBX_AddTimeHdr(BT_HDR *p_pkt, char *p_time); 967 968 /******************************************************************************* 969 ** 970 ** Function OBX_AddDescrHdr 971 ** 972 ** Description This function is called to add an OBEX Description header 973 ** to an OBEX packet. 974 ** 975 ** Returns TRUE, if the header is added successfully. 976 ** FALSE, if the operation failed. p_pkt is not altered. 977 ** 978 *******************************************************************************/ 979 OBX_API extern BOOLEAN OBX_AddDescrHdr(BT_HDR *p_pkt, UINT16 *p_descr, UINT16 len); 980 981 /******************************************************************************* 982 ** 983 ** Function OBX_AddAsciiDescrHdr 984 ** 985 ** Description This function is called to add an OBEX Description header 986 ** to an OBEX packet. 987 ** 988 ** Returns TRUE, if the header is added successfully. 989 ** FALSE, if the operation failed. p_pkt is not altered. 990 ** 991 *******************************************************************************/ 992 OBX_API extern BOOLEAN OBX_AddAsciiDescrHdr(BT_HDR *p_pkt, char *p_descr); 993 994 /******************************************************************************* 995 ** 996 ** Function OBX_AddTargetHdr 997 ** 998 ** Description This function is called to add an OBEX Target header to an OBEX 999 ** packet. This header is most commonly used in Connect packets. 1000 ** 1001 ** NOTE: The target header must be the first header in an OBEX message. 1002 ** 1003 ** Returns TRUE, if the header is added successfully. 1004 ** FALSE, if the operation failed. p_pkt is not altered. 1005 ** 1006 *******************************************************************************/ 1007 OBX_API extern BOOLEAN OBX_AddTargetHdr(BT_HDR *p_pkt, UINT8 *p_target, UINT16 len); 1008 1009 /******************************************************************************* 1010 ** 1011 ** Function OBX_AddHttpHdr 1012 ** 1013 ** Description This function is called to add an OBEX HTTP header 1014 ** to an OBEX packet. 1015 ** 1016 ** Returns TRUE, if the header is added successfully. 1017 ** FALSE, if the operation failed. p_pkt is not altered. 1018 ** 1019 *******************************************************************************/ 1020 OBX_API extern BOOLEAN OBX_AddHttpHdr(BT_HDR *p_pkt, UINT8 *p_http, UINT16 len); 1021 1022 /******************************************************************************* 1023 ** 1024 ** Function OBX_AddBodyHdr 1025 ** 1026 ** Description This function is called to add an OBEX body header 1027 ** to an OBEX packet. 1028 ** 1029 ** NOTE: The body header must be the last header in an OBEX message. 1030 ** 1031 ** Returns TRUE, if the header is added successfully. 1032 ** FALSE, if the operation failed. p_pkt is not altered. 1033 ** 1034 *******************************************************************************/ 1035 OBX_API extern BOOLEAN OBX_AddBodyHdr(BT_HDR *p_pkt, UINT8 *p_body, UINT16 len, BOOLEAN end); 1036 1037 /* Alternate Body header functions: for non-blocking scenario */ 1038 /******************************************************************************* 1039 ** 1040 ** Function OBX_AddBodyStart 1041 ** 1042 ** Description This function is called to get the address to the beginning of 1043 ** the byte sequence for an OBEX body header in an OBEX packet. 1044 ** 1045 ** Returns The address to add body content. 1046 ** 1047 *******************************************************************************/ 1048 OBX_API extern UINT8 *OBX_AddBodyStart(BT_HDR *p_pkt, UINT16 *p_len); 1049 1050 /******************************************************************************* 1051 ** 1052 ** Function OBX_AddBodyEnd 1053 ** 1054 ** Description This function is called to add the HI and the length of HV of an 1055 ** OBEX body header to an OBEX packet. If end is TRUE, HI is 1056 ** OBX_HI_BODY_END. If FALSE, HI is OBX_HI_BODY. It is assumed that 1057 ** the actual value of the body has been copied into the OBEX packet. 1058 ** 1059 ** Returns void 1060 ** 1061 *******************************************************************************/ 1062 OBX_API extern void OBX_AddBodyEnd(BT_HDR *p_pkt, UINT8 *p, UINT16 len, BOOLEAN end); 1063 1064 /******************************************************************************* 1065 ** 1066 ** Function OBX_AddWhoHdr 1067 ** 1068 ** Description This function is called to add an OBEX Who header to an OBEX 1069 ** packet. 1070 ** 1071 ** Note: Who header is typically used in an OBEX CONNECT response packet 1072 ** to indicate the UUID of the service that has accepted the 1073 ** directed connection. If the server calls OBX_StartServer() with 1074 ** specified target header, this OBEX implementation automatically 1075 ** adds this WHO header to the CONNECT response packet. If 1076 ** OBX_StartServer() is called with target header length as 0, the 1077 ** OBEX API user is responsible to add the WHO header. 1078 ** 1079 ** Returns TRUE, if the header is added successfully. 1080 ** FALSE, if the operation failed. p_pkt is not altered. 1081 ** 1082 *******************************************************************************/ 1083 OBX_API extern BOOLEAN OBX_AddWhoHdr(BT_HDR *p_pkt, UINT8 *p_who, UINT16 len); 1084 1085 /******************************************************************************* 1086 ** 1087 ** Function OBX_AddAppParamHdr 1088 ** 1089 ** Description This function is called to add an OBEX Application Parameter 1090 ** header to an OBEX packet. This header is used by the application 1091 ** layer above OBEX to convey application specific information. 1092 ** 1093 ** Returns TRUE, if the header is added successfully. 1094 ** FALSE, if the operation failed. p_pkt is not altered. 1095 ** 1096 *******************************************************************************/ 1097 OBX_API extern BOOLEAN OBX_AddAppParamHdr(BT_HDR *p_pkt, tOBX_TRIPLET *p_triplet, UINT8 num); 1098 1099 /******************************************************************************* 1100 ** 1101 ** Function OBX_AddDestNameHdr 1102 ** 1103 ** Description This function is called to add an OBEX DestName header 1104 ** to an OBEX packet. 1105 ** 1106 ** Returns TRUE, if the header is added successfully. 1107 ** FALSE, if the operation failed. p_pkt is not altered. 1108 ** 1109 *******************************************************************************/ 1110 OBX_API extern BOOLEAN OBX_AddDestNameHdr(BT_HDR *p_pkt, UINT16 *p_dest, UINT16 len); 1111 1112 /******************************************************************************* 1113 ** 1114 ** Function OBX_AddAsciiDestNameHdr 1115 ** 1116 ** Description This function is called to add an OBEX DestName header 1117 ** to an OBEX packet. 1118 ** 1119 ** Returns TRUE, if the header is added successfully. 1120 ** FALSE, if the operation failed. p_pkt is not altered. 1121 ** 1122 *******************************************************************************/ 1123 OBX_API extern BOOLEAN OBX_AddAsciiDestNameHdr(BT_HDR *p_pkt, char *p_descr); 1124 1125 /******************************************************************************* 1126 ** 1127 ** Function OBX_AddPermissionHdr 1128 ** 1129 ** Description This function is called to add an OBEX Permission header to an OBEX 1130 ** packet. 1131 ** bit 0 is set for read permission 1132 ** bit 1 is set for write permission 1133 ** bit 2 is set for delete permission 1134 ** bit 7 is set for modify permission 1135 ** 1136 ** Returns TRUE, if the header is added successfully. 1137 ** FALSE, if the operation failed. p_pkt is not altered. 1138 ** 1139 *******************************************************************************/ 1140 OBX_API extern BOOLEAN OBX_AddPermissionHdr(BT_HDR *p_pkt, UINT8 user, UINT8 group, UINT8 other); 1141 1142 /******************************************************************************* 1143 ** 1144 ** Function OBX_Add1ByteHdr 1145 ** 1146 ** Description This function is called to add a header with type as UINT8 1147 ** to an OBEX packet. 1148 ** 1149 ** Returns TRUE, if the header is added successfully. 1150 ** FALSE, if the operation failed. p_pkt is not altered. 1151 ** 1152 *******************************************************************************/ 1153 OBX_API extern BOOLEAN OBX_Add1ByteHdr(BT_HDR *p_pkt, UINT8 id, UINT8 data); 1154 1155 /******************************************************************************* 1156 ** 1157 ** Function OBX_Add4ByteHdr 1158 ** 1159 ** Description This function is called to add a header with type as UINT32 1160 ** to an OBEX packet. 1161 ** 1162 ** Returns TRUE, if the header is added successfully. 1163 ** FALSE, if the operation failed. p_pkt is not altered. 1164 ** 1165 *******************************************************************************/ 1166 OBX_API extern BOOLEAN OBX_Add4ByteHdr(BT_HDR *p_pkt, UINT8 id, UINT32 data); 1167 1168 /******************************************************************************* 1169 ** 1170 ** Function OBX_AddByteStrStart 1171 ** 1172 ** Description This function is called to get the address to the beginning of 1173 ** the byte sequence for an OBEX header in an OBEX packet. 1174 ** 1175 ** Returns The address to add the byte sequence. 1176 ** 1177 *******************************************************************************/ 1178 OBX_API extern UINT8 *OBX_AddByteStrStart(BT_HDR *p_pkt, UINT16 *p_len); 1179 1180 /******************************************************************************* 1181 ** 1182 ** Function OBX_AddByteStrHdr 1183 ** 1184 ** Description This function is called to add a header with type as byte sequence 1185 ** to an OBEX packet. 1186 ** 1187 ** Returns TRUE, if the header is added successfully. 1188 ** FALSE, if the operation failed. p_pkt is not altered. 1189 ** 1190 *******************************************************************************/ 1191 OBX_API extern BOOLEAN OBX_AddByteStrHdr(BT_HDR *p_pkt, UINT8 id, UINT8 *p_data, UINT16 len); 1192 1193 /******************************************************************************* 1194 ** 1195 ** Function OBX_AddUnicodeHdr 1196 ** 1197 ** Description This function is called to add a header with type as Unicode string 1198 ** to an OBEX packet. 1199 ** 1200 ** Returns TRUE, if the header is added successfully. 1201 ** FALSE, if the operation failed. p_pkt is not altered. 1202 ** 1203 *******************************************************************************/ 1204 OBX_API extern BOOLEAN OBX_AddUnicodeHdr(BT_HDR *p_pkt, UINT8 id, UINT16 *p_data, UINT16 len); 1205 1206 /******************************************************************************* 1207 ** 1208 ** Function OBX_AddTriplet 1209 ** 1210 ** Description This function is called to add a header with type as byte sequence 1211 ** to an OBEX packet. 1212 ** 1213 ** Note: The byte sequence uses a Tag-Length-Value encoding scheme 1214 ** These headers include: Application Parameters header 1215 ** Authenticate Challenge header 1216 ** Authenticate Response header 1217 ** 1218 ** Returns TRUE, if the header is added successfully. 1219 ** FALSE, if the operation failed. p_pkt is not altered. 1220 ** 1221 *******************************************************************************/ 1222 OBX_API extern BOOLEAN OBX_AddTriplet(BT_HDR *p_pkt, UINT8 id, tOBX_TRIPLET *p_triplet, UINT8 num); 1223 1224 /******************************************************************************* 1225 ** 1226 ** Function OBX_CheckHdr 1227 ** 1228 ** Description This function is called to check if the given OBEX packet 1229 ** contains the specified header. 1230 ** 1231 ** Returns NULL, if the header is not in the OBEX packet. 1232 ** The pointer to the specified header beginning from HI. 1233 ** 1234 *******************************************************************************/ 1235 OBX_API extern UINT8 * OBX_CheckHdr(BT_HDR *p_pkt, UINT8 id); 1236 1237 /******************************************************************************* 1238 ** 1239 ** Function OBX_ReadNumHdrs 1240 ** 1241 ** Description This function is called to check the number of headers in the 1242 ** given OBEX packet 1243 ** 1244 ** Returns number of headers. 1245 ** 1246 *******************************************************************************/ 1247 OBX_API extern UINT8 OBX_ReadNumHdrs(BT_HDR *p_pkt, UINT8 *p_num_body); 1248 1249 /******************************************************************************* 1250 ** 1251 ** Function OBX_ReadHdrLen 1252 ** 1253 ** Description This function is called to check the length of the specified 1254 ** header in the given OBEX packet. 1255 ** 1256 ** Returns OBX_INVALID_HDR_LEN, if the header is not in the OBEX packet. 1257 ** Otherwise the actual length of the header. 1258 ** 1259 *******************************************************************************/ 1260 OBX_API extern UINT16 OBX_ReadHdrLen(BT_HDR *p_pkt, UINT8 id); 1261 1262 /******************************************************************************* 1263 ** 1264 ** Function OBX_ReadNameHdr 1265 ** 1266 ** Description This function is called to get the Name Header in the given 1267 ** OBEX packet. 1268 ** 1269 ** Returns TRUE, if the header is in the OBEX packet. 1270 ** FALSE, otherwise. 1271 ** 1272 *******************************************************************************/ 1273 OBX_API extern BOOLEAN OBX_ReadNameHdr(BT_HDR *p_pkt, UINT16 *p_name, UINT16 *p_len); 1274 1275 /******************************************************************************* 1276 ** 1277 ** Function OBX_WcharToChar 1278 ** 1279 ** Description This function is called to convert Unicode (UINT16) to ASCII. 1280 ** 1281 ** Returns void. 1282 ** 1283 *******************************************************************************/ 1284 OBX_API extern void OBX_WcharToChar (char *a_str, UINT16* w_str, UINT16 a_size) ; 1285 1286 /******************************************************************************* 1287 ** 1288 ** Function OBX_ReadAsciiNameHdr 1289 ** 1290 ** Description This function is called to get the Name Header in the given 1291 ** OBEX packet. If Name header exists in the given OBEX packet, 1292 ** it is converted to ASCII format and copied into p_name. 1293 ** 1294 ** Returns TRUE, if the header is in the OBEX packet. 1295 ** FALSE, otherwise. 1296 ** 1297 *******************************************************************************/ 1298 OBX_API extern BOOLEAN OBX_ReadAsciiNameHdr(BT_HDR *p_pkt, char *p_name, UINT16 max_len); 1299 1300 /******************************************************************************* 1301 ** 1302 ** Function OBX_ReadTypeHdr 1303 ** 1304 ** Description This function is called to get the Type Header in the given 1305 ** OBEX packet. 1306 ** 1307 ** Returns TRUE, if the header is in the OBEX packet. 1308 ** FALSE, otherwise. 1309 ** 1310 *******************************************************************************/ 1311 OBX_API extern BOOLEAN OBX_ReadTypeHdr(BT_HDR *p_pkt, UINT8 **p_type, UINT16 *p_len); 1312 1313 /******************************************************************************* 1314 ** 1315 ** Function OBX_ReadLengthHdr 1316 ** 1317 ** Description This function is called to get the Length Header in the given 1318 ** OBEX packet. 1319 ** 1320 ** Returns TRUE, if the header is in the OBEX packet. 1321 ** FALSE, otherwise. 1322 ** 1323 *******************************************************************************/ 1324 OBX_API extern BOOLEAN OBX_ReadLengthHdr(BT_HDR *p_pkt, UINT32 *p_len); 1325 1326 /******************************************************************************* 1327 ** 1328 ** Function OBX_ReadTimeHdr 1329 ** 1330 ** Description This function is called to get the Time Header in the given 1331 ** OBEX packet. 1332 ** 1333 ** Returns TRUE, if the header is in the OBEX packet. 1334 ** FALSE, otherwise. 1335 ** 1336 *******************************************************************************/ 1337 OBX_API extern BOOLEAN OBX_ReadTimeHdr(BT_HDR *p_pkt, UINT8 **p_time, UINT16 *p_len); 1338 1339 /******************************************************************************* 1340 ** 1341 ** Function OBX_ReadDescrHdr 1342 ** 1343 ** Description This function is called to get the Description Header in the 1344 ** given OBEX packet. 1345 ** 1346 ** Returns TRUE, if the header is in the OBEX packet. 1347 ** FALSE, otherwise. 1348 ** 1349 *******************************************************************************/ 1350 OBX_API extern BOOLEAN OBX_ReadDescrHdr(BT_HDR *p_pkt, UINT16 *p_descr, UINT16 *p_len); 1351 1352 /******************************************************************************* 1353 ** 1354 ** Function OBX_ReadDestNameHdr 1355 ** 1356 ** Description This function is called to get the DestName Header in the 1357 ** given OBEX packet. 1358 ** 1359 ** Returns TRUE, if the header is in the OBEX packet. 1360 ** FALSE, otherwise. 1361 ** 1362 *******************************************************************************/ 1363 OBX_API extern BOOLEAN OBX_ReadDestNameHdr(BT_HDR *p_pkt, UINT16 *p_dest, UINT16 *p_len); 1364 1365 /******************************************************************************* 1366 ** 1367 ** Function OBX_ReadAsciiDescrHdr 1368 ** 1369 ** Description This function is called to get the Description Header in the 1370 ** given OBEX packet. If Description header exists in the given 1371 ** OBEX packet, it is converted to ASCII format and copied into 1372 ** p_descr. 1373 ** 1374 ** Returns TRUE, if the header is in the OBEX packet. 1375 ** FALSE, otherwise. 1376 ** 1377 *******************************************************************************/ 1378 OBX_API extern BOOLEAN OBX_ReadAsciiDescrHdr(BT_HDR *p_pkt, char *p_descr, UINT16 max_len); 1379 1380 /******************************************************************************* 1381 ** 1382 ** Function OBX_ReadAsciiDestNameHdr 1383 ** 1384 ** Description This function is called to get the DestName Header in the 1385 ** given OBEX packet. If DestName header exists in the given 1386 ** OBEX packet, it is converted to ASCII format and copied into 1387 ** p_descr. 1388 ** 1389 ** Returns TRUE, if the header is in the OBEX packet. 1390 ** FALSE, otherwise. 1391 ** 1392 *******************************************************************************/ 1393 OBX_API extern BOOLEAN OBX_ReadAsciiDestNameHdr(BT_HDR *p_pkt, char *p_dest, UINT16 max_len); 1394 1395 /******************************************************************************* 1396 ** 1397 ** Function OBX_ReadTargetHdr 1398 ** 1399 ** Description This function is called to get the Target Header in the 1400 ** given OBEX packet. 1401 ** 1402 ** Returns TRUE, if the header is in the OBEX packet. 1403 ** FALSE, otherwise. 1404 ** 1405 *******************************************************************************/ 1406 OBX_API extern BOOLEAN OBX_ReadTargetHdr(BT_HDR *p_pkt, UINT8 **p_target, UINT16 *p_len, UINT8 next); 1407 1408 /******************************************************************************* 1409 ** 1410 ** Function OBX_ReadHttpHdr 1411 ** 1412 ** Description This function is called to get the HTTP Header in the 1413 ** given OBEX packet. 1414 ** 1415 ** Returns TRUE, if the header is in the OBEX packet. 1416 ** FALSE, otherwise. 1417 ** 1418 *******************************************************************************/ 1419 OBX_API extern BOOLEAN OBX_ReadHttpHdr(BT_HDR *p_pkt, UINT8 **p_http, UINT16 *p_len, UINT8 next); 1420 1421 /******************************************************************************* 1422 ** 1423 ** Function OBX_ReadBodyHdr 1424 ** 1425 ** Description This function is called to get the Body Header in the 1426 ** given OBEX packet. 1427 ** 1428 ** Returns 1, if a single header is in the OBEX packet. 1429 ** 2, if a end of body header is in the OBEX packet. 1430 ** 0, (FALSE) otherwise. 1431 ** 1432 *******************************************************************************/ 1433 OBX_API extern UINT8 OBX_ReadBodyHdr(BT_HDR *p_pkt, UINT8 **p_body, UINT16 *p_len, BOOLEAN *p_end); 1434 1435 /******************************************************************************* 1436 ** 1437 ** Function OBX_ReadWhoHdr 1438 ** 1439 ** Description This function is called to get the Who Header in the 1440 ** given OBEX packet. 1441 ** 1442 ** Returns TRUE, if the header is in the OBEX packet. 1443 ** FALSE, otherwise. 1444 ** 1445 *******************************************************************************/ 1446 OBX_API extern BOOLEAN OBX_ReadWhoHdr(BT_HDR *p_pkt, UINT8 **p_who, UINT16 *p_len); 1447 1448 /******************************************************************************* 1449 ** 1450 ** Function OBX_ReadAppParamHdr 1451 ** 1452 ** Description This function is called to get the Application Parameter Header 1453 ** in the given OBEX packet. 1454 ** 1455 ** Returns TRUE, if the header is in the OBEX packet. 1456 ** FALSE, otherwise. 1457 ** 1458 *******************************************************************************/ 1459 OBX_API extern BOOLEAN OBX_ReadAppParamHdr(BT_HDR *p_pkt, UINT8 *p_tag, UINT8 **p_app_param, UINT8 *p_len, UINT8 next); 1460 1461 /******************************************************************************* 1462 ** 1463 ** Function OBX_ReadPermissionHdr 1464 ** 1465 ** Description This function is called to get the Application Parameter Header 1466 ** in the given OBEX packet. 1467 ** 1468 ** Returns TRUE, if the header is in the OBEX packet. 1469 ** FALSE, otherwise. 1470 ** 1471 *******************************************************************************/ 1472 OBX_API extern BOOLEAN OBX_ReadPermissionHdr(BT_HDR *p_pkt, UINT8 *p_user, UINT8 *p_group, UINT8 *p_other); 1473 1474 /******************************************************************************* 1475 ** 1476 ** Function OBX_Read1ByteHdr 1477 ** 1478 ** Description This function is called to get the UINT8 HV of the given HI 1479 ** in the given OBEX packet. 1480 ** 1481 ** Returns TRUE, if the header is in the OBEX packet. 1482 ** FALSE, otherwise. 1483 ** 1484 *******************************************************************************/ 1485 OBX_API extern BOOLEAN OBX_Read1ByteHdr(BT_HDR *p_pkt, UINT8 id, UINT8 *p_data); 1486 1487 /******************************************************************************* 1488 ** 1489 ** Function OBX_Read4ByteHdr 1490 ** 1491 ** Description This function is called to get the UINT32 HV of the given HI 1492 ** in the given OBEX packet. 1493 ** 1494 ** Returns TRUE, if the header is in the OBEX packet. 1495 ** FALSE, otherwise. 1496 ** 1497 *******************************************************************************/ 1498 OBX_API extern BOOLEAN OBX_Read4ByteHdr(BT_HDR *p_pkt, UINT8 id, UINT32 *p_data); 1499 1500 /******************************************************************************* 1501 ** 1502 ** Function OBX_ReadByteStrHdr 1503 ** 1504 ** Description This function is called to get the byte sequence HV of the given 1505 ** HI in the given OBEX packet. 1506 ** 1507 ** Returns TRUE, if the header is in the OBEX packet. 1508 ** FALSE, otherwise. 1509 ** 1510 *******************************************************************************/ 1511 OBX_API extern BOOLEAN OBX_ReadByteStrHdr(BT_HDR *p_pkt, UINT8 id, UINT8 **p_data, UINT16 *p_len, UINT8 next); 1512 1513 /******************************************************************************* 1514 ** 1515 ** Function OBX_ReadUnicodeHdr 1516 ** 1517 ** Description This function is called to get the Unicode HV of the given 1518 ** HI in the given OBEX packet. 1519 ** 1520 ** Returns TRUE, if the header is in the OBEX packet. 1521 ** FALSE, otherwise. 1522 ** 1523 *******************************************************************************/ 1524 OBX_API extern BOOLEAN OBX_ReadUnicodeHdr(BT_HDR *p_pkt, UINT8 id, UINT16 *p_data, UINT16 *p_len); 1525 1526 /******************************************************************************* 1527 ** 1528 ** Function OBX_ReadTriplet 1529 ** 1530 ** Description This function is called to get the Triplet HV of the given 1531 ** HI in the given OBEX packet. 1532 ** 1533 ** Returns TRUE, if the header is in the OBEX packet. 1534 ** FALSE, otherwise. 1535 ** 1536 *******************************************************************************/ 1537 OBX_API extern BOOLEAN OBX_ReadTriplet(BT_HDR *p_pkt, UINT8 id, tOBX_TRIPLET *p_triplet, UINT8 *p_num); 1538 1539 /******************************************************************************* 1540 ** 1541 ** Function OBX_ReadActionIdHdr 1542 ** 1543 ** Description This function is called to get the HV of the Action ID header 1544 ** in the given OBEX packet. 1545 ** 1546 ** Returns TRUE, if the header is in the OBEX packet. 1547 ** FALSE, otherwise. 1548 ** 1549 *******************************************************************************/ 1550 OBX_API extern BOOLEAN OBX_ReadActionIdHdr(BT_HDR *p_pkt, UINT8 *p_data); 1551 1552 /******************************************************************************* 1553 ** 1554 ** Function OBX_ReadChallenge 1555 ** 1556 ** Description This function is called to read the Realm and options of the 1557 ** Authentication Challenge Header in the given OBEX packet. 1558 ** 1559 ** Returns TRUE, if the header is in the OBEX packet. 1560 ** FALSE, otherwise. 1561 ** 1562 *******************************************************************************/ 1563 OBX_API extern BOOLEAN OBX_ReadChallenge(BT_HDR *p_pkt, tOBX_CHARSET *p_charset, 1564 UINT8 **p_realm, UINT8 *p_len, 1565 tOBX_AUTH_OPT *p_option); 1566 1567 /******************************************************************************* 1568 ** 1569 ** Function OBX_ReadAuthParams 1570 ** 1571 ** Description This function is called to read the User ID of the 1572 ** Authentication Response Header in the given OBEX packet. 1573 ** 1574 ** Returns TRUE, if the header is in the OBEX packet. 1575 ** FALSE, otherwise. 1576 ** 1577 *******************************************************************************/ 1578 OBX_API extern BOOLEAN OBX_ReadAuthParams(BT_HDR *p_pkt, UINT8 **p_userid, UINT8 *p_len, 1579 BOOLEAN *is_challenged, tOBX_AUTH_OPT *p_option); 1580 1581 1582 /******************************************************************************* 1583 ** 1584 ** Function utfc_16_to_8 1585 ** 1586 ** Description Convert a UTF-16 array to a null-terminated UTF-8 string. 1587 ** Illegal characters are skipped. 1588 ** 1589 ** Returns Length of UTF-8 string in bytes. 1590 ** 1591 *******************************************************************************/ 1592 OBX_API extern UINT16 utfc_16_to_8(UINT8 *p_utf8, UINT16 utf8_len, UINT16 *p_utf16, UINT16 utf16_len); 1593 1594 /******************************************************************************* 1595 ** 1596 ** Function utfc_8_to_16 1597 ** 1598 ** Description Convert a null-terminated UTF-8 string to a UTF-16 array. 1599 ** Illegal characters are skipped. 1600 ** 1601 ** Returns Length of UTF-16 array. 1602 ** 1603 *******************************************************************************/ 1604 OBX_API extern UINT16 utfc_8_to_16(UINT16 *p_utf16, UINT16 utf16_len, UINT8 *p_utf8); 1605 1606 /******************************************************************************* 1607 ** 1608 ** Function OBX_AddUtf8NameHdr 1609 ** 1610 ** Description This function is called to add an OBEX Name header 1611 ** to an OBEX packet. 1612 ** 1613 ** Returns TRUE, if the header is added successfully. 1614 ** FALSE, if the operation failed. p_pkt is not altered. 1615 ** 1616 *******************************************************************************/ 1617 OBX_API extern BOOLEAN OBX_AddUtf8NameHdr(BT_HDR *p_pkt, UINT8 *p_name); 1618 1619 /******************************************************************************* 1620 ** 1621 ** Function OBX_AddUtf8DescrHdr 1622 ** 1623 ** Description This function is called to add an OBEX Description header 1624 ** to an OBEX packet. 1625 ** 1626 ** Returns TRUE, if the header is added successfully. 1627 ** FALSE, if the operation failed. p_pkt is not altered. 1628 ** 1629 *******************************************************************************/ 1630 OBX_API extern BOOLEAN OBX_AddUtf8DescrHdr(BT_HDR *p_pkt, UINT8 *p_descr); 1631 1632 /******************************************************************************* 1633 ** 1634 ** Function OBX_AddUtf8DestNameHdr 1635 ** 1636 ** Description This function is called to add an OBEX DestName header 1637 ** to an OBEX packet. 1638 ** 1639 ** Returns TRUE, if the header is added successfully. 1640 ** FALSE, if the operation failed. p_pkt is not altered. 1641 ** 1642 *******************************************************************************/ 1643 OBX_API extern BOOLEAN OBX_AddUtf8DestNameHdr(BT_HDR *p_pkt, UINT8 *p_dest); 1644 1645 /******************************************************************************* 1646 ** 1647 ** Function OBX_ReadUtf8NameHdr 1648 ** 1649 ** Description This function is called to get the Name Header in the given 1650 ** OBEX packet. If Name header exists in the given OBEX packet, 1651 ** it is converted to UTF8 format and copied into p_name. 1652 ** 1653 ** Returns TRUE, if the header is in the OBEX packet. 1654 ** FALSE, otherwise. 1655 ** 1656 *******************************************************************************/ 1657 OBX_API extern BOOLEAN OBX_ReadUtf8NameHdr(BT_HDR *p_pkt, UINT8 *p_name, UINT16 max_len); 1658 1659 /******************************************************************************* 1660 ** 1661 ** Function OBX_ReadUtf8DescrHdr 1662 ** 1663 ** Description This function is called to get the Description Header in the 1664 ** given OBEX packet. If Description header exists in the given 1665 ** OBEX packet, it is converted to UTF8 format and copied into 1666 ** p_descr. 1667 ** 1668 ** Returns TRUE, if the header is in the OBEX packet. 1669 ** FALSE, otherwise. 1670 ** 1671 *******************************************************************************/ 1672 OBX_API extern BOOLEAN OBX_ReadUtf8DescrHdr(BT_HDR *p_pkt, UINT8 *p_descr, UINT16 max_len); 1673 1674 /******************************************************************************* 1675 ** 1676 ** Function OBX_ReadUtf8DestNameHdr 1677 ** 1678 ** Description This function is called to get the DestName Header in the 1679 ** given OBEX packet. 1680 ** 1681 ** Returns TRUE, if the header is in the OBEX packet. 1682 ** FALSE, otherwise. 1683 ** 1684 *******************************************************************************/ 1685 OBX_API extern BOOLEAN OBX_ReadUtf8DestNameHdr(BT_HDR *p_pkt, UINT8 *p_dest, UINT16 max_len); 1686 1687 /******************************************************************************* 1688 ** 1689 ** Function OBX_VerifyResponse 1690 ** 1691 ** Description This function is called by the client to verify the challenge 1692 ** response. 1693 ** 1694 ** Returns TRUE, if successful. 1695 ** FALSE, if authentication failed 1696 ** 1697 *******************************************************************************/ 1698 OBX_API extern BOOLEAN OBX_VerifyResponse(UINT32 nonce_u32, UINT8 *p_password, UINT8 password_len, UINT8 *p_response); 1699 1700 #ifdef __cplusplus 1701 } 1702 #endif 1703 1704 #endif /* OBX_API_H */ 1705
