1 /* @(#) $Header: /tcpdump/master/tcpdump/telnet.h,v 1.5 2007-08-29 02:31:44 mcr Exp $ (LBL) */ 2 3 /* NetBSD: telnet.h,v 1.9 2001/06/11 01:50:50 wiz Exp */ 4 5 /* 6 * Copyright (c) 1983, 1993 7 * The Regents of the University of California. All rights reserved. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. All advertising materials mentioning features or use of this software 18 * must display the following acknowledgement: 19 * This product includes software developed by the University of 20 * California, Berkeley and its contributors. 21 * 4. Neither the name of the University nor the names of its contributors 22 * may be used to endorse or promote products derived from this software 23 * without specific prior written permission. 24 * 25 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 26 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 27 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 28 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 29 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 30 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 31 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 32 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 33 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 34 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 35 * SUCH DAMAGE. 36 * 37 * @(#)telnet.h 8.2 (Berkeley) 12/15/93 38 */ 39 40 #ifndef _ARPA_TELNET_H_ 41 #define _ARPA_TELNET_H_ 42 43 /* 44 * Definitions for the TELNET protocol. 45 */ 46 #define IAC 255 /* interpret as command: */ 47 #define DONT 254 /* you are not to use option */ 48 #define DO 253 /* please, you use option */ 49 #define WONT 252 /* I won't use option */ 50 #define WILL 251 /* I will use option */ 51 #define SB 250 /* interpret as subnegotiation */ 52 #define GA 249 /* you may reverse the line */ 53 #define EL 248 /* erase the current line */ 54 #define EC 247 /* erase the current character */ 55 #define AYT 246 /* are you there */ 56 #define AO 245 /* abort output--but let prog finish */ 57 #define IP 244 /* interrupt process--permanently */ 58 #define BREAK 243 /* break */ 59 #define DM 242 /* data mark--for connect. cleaning */ 60 #define NOP 241 /* nop */ 61 #define SE 240 /* end sub negotiation */ 62 #define EOR 239 /* end of record (transparent mode) */ 63 #define ABORT 238 /* Abort process */ 64 #define SUSP 237 /* Suspend process */ 65 #define xEOF 236 /* End of file: EOF is already used... */ 66 67 #define SYNCH 242 /* for telfunc calls */ 68 69 #ifdef TELCMDS 70 const char *telcmds[] = { 71 "EOF", "SUSP", "ABORT", "EOR", 72 "SE", "NOP", "DMARK", "BRK", "IP", "AO", "AYT", "EC", 73 "EL", "GA", "SB", "WILL", "WONT", "DO", "DONT", "IAC", 0, 74 }; 75 #else 76 extern char *telcmds[]; 77 #endif 78 79 #define TELCMD_FIRST xEOF 80 #define TELCMD_LAST IAC 81 #define TELCMD_OK(x) ((unsigned int)(x) <= TELCMD_LAST && \ 82 (unsigned int)(x) >= TELCMD_FIRST) 83 #define TELCMD(x) telcmds[(x)-TELCMD_FIRST] 84 85 /* telnet options */ 86 #define TELOPT_BINARY 0 /* 8-bit data path */ 87 #define TELOPT_ECHO 1 /* echo */ 88 #define TELOPT_RCP 2 /* prepare to reconnect */ 89 #define TELOPT_SGA 3 /* suppress go ahead */ 90 #define TELOPT_NAMS 4 /* approximate message size */ 91 #define TELOPT_STATUS 5 /* give status */ 92 #define TELOPT_TM 6 /* timing mark */ 93 #define TELOPT_RCTE 7 /* remote controlled transmission and echo */ 94 #define TELOPT_NAOL 8 /* negotiate about output line width */ 95 #define TELOPT_NAOP 9 /* negotiate about output page size */ 96 #define TELOPT_NAOCRD 10 /* negotiate about CR disposition */ 97 #define TELOPT_NAOHTS 11 /* negotiate about horizontal tabstops */ 98 #define TELOPT_NAOHTD 12 /* negotiate about horizontal tab disposition */ 99 #define TELOPT_NAOFFD 13 /* negotiate about formfeed disposition */ 100 #define TELOPT_NAOVTS 14 /* negotiate about vertical tab stops */ 101 #define TELOPT_NAOVTD 15 /* negotiate about vertical tab disposition */ 102 #define TELOPT_NAOLFD 16 /* negotiate about output LF disposition */ 103 #define TELOPT_XASCII 17 /* extended ascic character set */ 104 #define TELOPT_LOGOUT 18 /* force logout */ 105 #define TELOPT_BM 19 /* byte macro */ 106 #define TELOPT_DET 20 /* data entry terminal */ 107 #define TELOPT_SUPDUP 21 /* supdup protocol */ 108 #define TELOPT_SUPDUPOUTPUT 22 /* supdup output */ 109 #define TELOPT_SNDLOC 23 /* send location */ 110 #define TELOPT_TTYPE 24 /* terminal type */ 111 #define TELOPT_EOR 25 /* end or record */ 112 #define TELOPT_TUID 26 /* TACACS user identification */ 113 #define TELOPT_OUTMRK 27 /* output marking */ 114 #define TELOPT_TTYLOC 28 /* terminal location number */ 115 #define TELOPT_3270REGIME 29 /* 3270 regime */ 116 #define TELOPT_X3PAD 30 /* X.3 PAD */ 117 #define TELOPT_NAWS 31 /* window size */ 118 #define TELOPT_TSPEED 32 /* terminal speed */ 119 #define TELOPT_LFLOW 33 /* remote flow control */ 120 #define TELOPT_LINEMODE 34 /* Linemode option */ 121 #define TELOPT_XDISPLOC 35 /* X Display Location */ 122 #define TELOPT_OLD_ENVIRON 36 /* Old - Environment variables */ 123 #define TELOPT_AUTHENTICATION 37/* Authenticate */ 124 #define TELOPT_ENCRYPT 38 /* Encryption option */ 125 #define TELOPT_NEW_ENVIRON 39 /* New - Environment variables */ 126 #define TELOPT_EXOPL 255 /* extended-options-list */ 127 128 129 #define NTELOPTS (1+TELOPT_NEW_ENVIRON) 130 #ifdef TELOPTS 131 const char *telopts[NTELOPTS+1] = { 132 "BINARY", "ECHO", "RCP", "SUPPRESS GO AHEAD", "NAME", 133 "STATUS", "TIMING MARK", "RCTE", "NAOL", "NAOP", 134 "NAOCRD", "NAOHTS", "NAOHTD", "NAOFFD", "NAOVTS", 135 "NAOVTD", "NAOLFD", "EXTEND ASCII", "LOGOUT", "BYTE MACRO", 136 "DATA ENTRY TERMINAL", "SUPDUP", "SUPDUP OUTPUT", 137 "SEND LOCATION", "TERMINAL TYPE", "END OF RECORD", 138 "TACACS UID", "OUTPUT MARKING", "TTYLOC", 139 "3270 REGIME", "X.3 PAD", "NAWS", "TSPEED", "LFLOW", 140 "LINEMODE", "XDISPLOC", "OLD-ENVIRON", "AUTHENTICATION", 141 "ENCRYPT", "NEW-ENVIRON", 142 0, 143 }; 144 #define TELOPT_FIRST TELOPT_BINARY 145 #define TELOPT_LAST TELOPT_NEW_ENVIRON 146 #define TELOPT_OK(x) ((unsigned int)(x) <= TELOPT_LAST) 147 #define TELOPT(x) telopts[(x)-TELOPT_FIRST] 148 #endif 149 150 /* sub-option qualifiers */ 151 #define TELQUAL_IS 0 /* option is... */ 152 #define TELQUAL_SEND 1 /* send option */ 153 #define TELQUAL_INFO 2 /* ENVIRON: informational version of IS */ 154 #define TELQUAL_REPLY 2 /* AUTHENTICATION: client version of IS */ 155 #define TELQUAL_NAME 3 /* AUTHENTICATION: client version of IS */ 156 157 #define LFLOW_OFF 0 /* Disable remote flow control */ 158 #define LFLOW_ON 1 /* Enable remote flow control */ 159 #define LFLOW_RESTART_ANY 2 /* Restart output on any char */ 160 #define LFLOW_RESTART_XON 3 /* Restart output only on XON */ 161 162 /* 163 * LINEMODE suboptions 164 */ 165 166 #define LM_MODE 1 167 #define LM_FORWARDMASK 2 168 #define LM_SLC 3 169 170 #define MODE_EDIT 0x01 171 #define MODE_TRAPSIG 0x02 172 #define MODE_ACK 0x04 173 #define MODE_SOFT_TAB 0x08 174 #define MODE_LIT_ECHO 0x10 175 176 #define MODE_MASK 0x1f 177 178 /* Not part of protocol, but needed to simplify things... */ 179 #define MODE_FLOW 0x0100 180 #define MODE_ECHO 0x0200 181 #define MODE_INBIN 0x0400 182 #define MODE_OUTBIN 0x0800 183 #define MODE_FORCE 0x1000 184 185 #define SLC_SYNCH 1 186 #define SLC_BRK 2 187 #define SLC_IP 3 188 #define SLC_AO 4 189 #define SLC_AYT 5 190 #define SLC_EOR 6 191 #define SLC_ABORT 7 192 #define SLC_EOF 8 193 #define SLC_SUSP 9 194 #define SLC_EC 10 195 #define SLC_EL 11 196 #define SLC_EW 12 197 #define SLC_RP 13 198 #define SLC_LNEXT 14 199 #define SLC_XON 15 200 #define SLC_XOFF 16 201 #define SLC_FORW1 17 202 #define SLC_FORW2 18 203 #define SLC_MCL 19 204 #define SLC_MCR 20 205 #define SLC_MCWL 21 206 #define SLC_MCWR 22 207 #define SLC_MCBOL 23 208 #define SLC_MCEOL 24 209 #define SLC_INSRT 25 210 #define SLC_OVER 26 211 #define SLC_ECR 27 212 #define SLC_EWR 28 213 #define SLC_EBOL 29 214 #define SLC_EEOL 30 215 216 #define NSLC 30 217 218 /* 219 * For backwards compatibility, we define SLC_NAMES to be the 220 * list of names if SLC_NAMES is not defined. 221 */ 222 #define SLC_NAMELIST "0", "SYNCH", "BRK", "IP", "AO", "AYT", "EOR", \ 223 "ABORT", "EOF", "SUSP", "EC", "EL", "EW", "RP", \ 224 "LNEXT", "XON", "XOFF", "FORW1", "FORW2", \ 225 "MCL", "MCR", "MCWL", "MCWR", "MCBOL", \ 226 "MCEOL", "INSRT", "OVER", "ECR", "EWR", \ 227 "EBOL", "EEOL", \ 228 0, 229 230 #ifdef SLC_NAMES 231 const char *slc_names[] = { 232 SLC_NAMELIST 233 }; 234 #else 235 extern char *slc_names[]; 236 #define SLC_NAMES SLC_NAMELIST 237 #endif 238 239 #define SLC_NAME_OK(x) ((unsigned int)(x) <= NSLC) 240 #define SLC_NAME(x) slc_names[x] 241 242 #define SLC_NOSUPPORT 0 243 #define SLC_CANTCHANGE 1 244 #define SLC_VARIABLE 2 245 #define SLC_DEFAULT 3 246 #define SLC_LEVELBITS 0x03 247 248 #define SLC_FUNC 0 249 #define SLC_FLAGS 1 250 #define SLC_VALUE 2 251 252 #define SLC_ACK 0x80 253 #define SLC_FLUSHIN 0x40 254 #define SLC_FLUSHOUT 0x20 255 256 #define OLD_ENV_VAR 1 257 #define OLD_ENV_VALUE 0 258 #define NEW_ENV_VAR 0 259 #define NEW_ENV_VALUE 1 260 #define ENV_ESC 2 261 #define ENV_USERVAR 3 262 263 /* 264 * AUTHENTICATION suboptions 265 */ 266 267 /* 268 * Who is authenticating who ... 269 */ 270 #define AUTH_WHO_CLIENT 0 /* Client authenticating server */ 271 #define AUTH_WHO_SERVER 1 /* Server authenticating client */ 272 #define AUTH_WHO_MASK 1 273 274 /* 275 * amount of authentication done 276 */ 277 #define AUTH_HOW_ONE_WAY 0 278 #define AUTH_HOW_MUTUAL 2 279 #define AUTH_HOW_MASK 2 280 281 /* 282 * should we be encrypting? (not yet formally standardized) 283 */ 284 #define AUTH_ENCRYPT_OFF 0 285 #define AUTH_ENCRYPT_ON 4 286 #define AUTH_ENCRYPT_MASK 4 287 288 #define AUTHTYPE_NULL 0 289 #define AUTHTYPE_KERBEROS_V4 1 290 #define AUTHTYPE_KERBEROS_V5 2 291 #define AUTHTYPE_SPX 3 292 #define AUTHTYPE_MINK 4 293 #define AUTHTYPE_CNT 5 294 295 #define AUTHTYPE_TEST 99 296 297 #ifdef AUTH_NAMES 298 const char *authtype_names[] = { 299 "NULL", "KERBEROS_V4", "KERBEROS_V5", "SPX", "MINK", 0, 300 }; 301 #else 302 extern char *authtype_names[]; 303 #endif 304 305 #define AUTHTYPE_NAME_OK(x) ((unsigned int)(x) < AUTHTYPE_CNT) 306 #define AUTHTYPE_NAME(x) authtype_names[x] 307 308 /* 309 * ENCRYPTion suboptions 310 */ 311 #define ENCRYPT_IS 0 /* I pick encryption type ... */ 312 #define ENCRYPT_SUPPORT 1 /* I support encryption types ... */ 313 #define ENCRYPT_REPLY 2 /* Initial setup response */ 314 #define ENCRYPT_START 3 /* Am starting to send encrypted */ 315 #define ENCRYPT_END 4 /* Am ending encrypted */ 316 #define ENCRYPT_REQSTART 5 /* Request you start encrypting */ 317 #define ENCRYPT_REQEND 6 /* Request you send encrypting */ 318 #define ENCRYPT_ENC_KEYID 7 319 #define ENCRYPT_DEC_KEYID 8 320 #define ENCRYPT_CNT 9 321 322 #define ENCTYPE_ANY 0 323 #define ENCTYPE_DES_CFB64 1 324 #define ENCTYPE_DES_OFB64 2 325 #define ENCTYPE_CNT 3 326 327 #ifdef ENCRYPT_NAMES 328 const char *encrypt_names[] = { 329 "IS", "SUPPORT", "REPLY", "START", "END", 330 "REQUEST-START", "REQUEST-END", "ENC-KEYID", "DEC-KEYID", 331 0, 332 }; 333 const char *enctype_names[] = { 334 "ANY", "DES_CFB64", "DES_OFB64", 0, 335 }; 336 #else 337 extern char *encrypt_names[]; 338 extern char *enctype_names[]; 339 #endif 340 341 342 #define ENCRYPT_NAME_OK(x) ((unsigned int)(x) < ENCRYPT_CNT) 343 #define ENCRYPT_NAME(x) encrypt_names[x] 344 345 #define ENCTYPE_NAME_OK(x) ((unsigned int)(x) < ENCTYPE_CNT) 346 #define ENCTYPE_NAME(x) enctype_names[x] 347 348 #endif /* _ARPA_TELNET_H_ */ 349
