1 define(MULTIARCH_HEADERS,ifdef(`DO_MULTIARCH', 2 Multi-Arch: same 3 Pre-Depends: ${misc:Pre-Depends},REMOVE_ME))dnl 4 define(UTIL_LINUX_NG_DEFINES, 5 ifdef(`UTIL_LINUX_NG', ``libblkid-dev (>= 2.16), uuid-dev (>= 2.16),''))dnl 6 define(DIETLIBC_DEFINES, 7 ifdef(`DIETLIBC', ``dietlibc-dev (>> 0.30) [alpha amd64 arm hppa i386 ia64 powerpc ppc64 s390 sparc],''))dnl 8 Source: e2fsprogs 9 Section: admin 10 Priority: required 11 Maintainer: Theodore Y. Ts'o <tytso (a] mit.edu> 12 Build-Depends: gettext, texinfo, pkg-config, DIETLIBC_DEFINES gcc-multilib [mips mipsel], debhelper (>= 7.0), UTIL_LINUX_NG_DEFINES m4 13 Standards-Version: 3.9.5 14 Homepage: http://e2fsprogs.sourceforge.net 15 16 ifdef(`E2FSCK_STATIC',`` 17 Package: e2fsck-static 18 Priority: optional 19 Depends: ${shlibs:Depends}, ${misc:Depends} 20 Recommends: sash | bash-static | zsh-static | busybox-static | zsh30-static 21 Architecture: any 22 Description: statically-linked version of the ext2/ext3/ext4 filesystem checker 23 This may be of some help to you if your filesystem gets corrupted enough 24 to break the shared libraries used by the dynamically linked checker. 25 . 26 This binary takes much more space than its dynamic counterpart located 27 in e2fsprogs, though. 28 . 29 You may want to install a statically-linked shell as well, to be able 30 to run this program if something like your C library gets corrupted. 31 '')dnl 32 33 Package: libcomerr2 34 Section: libs 35 Provides: libcomerr-kth-compat 36 Depends: ${shlibs:Depends}, ${misc:Depends} 37 Replaces: e2fsprogs (<< 1.34-1) 38 Architecture: any 39 MULTIARCH_HEADERS 40 Description: common error description library 41 libcomerr is an attempt to present a common error-handling mechanism to 42 manipulate the most common form of error code in a fashion that does not 43 have the problems identified with mechanisms commonly in use. 44 45 Package: comerr-dev 46 Section: libdevel 47 Priority: extra 48 Depends: libc6-dev | libc-dev, libcomerr2 (= ${mainBinary}), ${misc:Depends} 49 Suggests: doc-base 50 Replaces: e2fslibs-dev (<< 1.33-2), libkrb5-dev (<< 1.3) 51 Architecture: any 52 Description: common error description library - headers and static libraries 53 libcom_err is an attempt to present a common error-handling mechanism to 54 manipulate the most common form of error code in a fashion that does not 55 have the problems identified with mechanisms commonly in use. 56 . 57 This package contains the development environment for the com_err library. 58 59 Package: libss2 60 Section: libs 61 Depends: libcomerr2, ${shlibs:Depends}, ${misc:Depends} 62 Replaces: e2fsprogs (<< 1.34-1) 63 Architecture: any 64 MULTIARCH_HEADERS 65 Description: command-line interface parsing library 66 libss provides a simple command-line interface parser which will 67 accept input from the user, parse the command into an argv argument 68 vector, and then dispatch it to a handler function. 69 . 70 It was originally inspired by the Multics SubSystem library. 71 72 Package: ss-dev 73 Section: libdevel 74 Priority: extra 75 Depends: libc6-dev | libc-dev, libss2 (= ${mainBinary}), comerr-dev, ${misc:Depends} 76 Architecture: any 77 Description: command-line interface parsing library - headers and static libraries 78 This package includes a tool that parses a command table to generate 79 a simple command-line interface parser, the include files needed to 80 compile and use it, and the static libs. 81 . 82 It was originally inspired by the Multics SubSystem library. 83 . 84 This package contains the development environment for the ss library. 85 ifdef(`UTIL_LINUX_NG',,`` 86 Package: libuuid1 87 Section: libs 88 Depends: passwd, ${shlibs:Depends}, ${misc:Depends} 89 Recommends: uuid-runtime 90 Replaces: e2fsprogs (<< 1.34-1) 91 Architecture: any 92 MULTIARCH_HEADERS 93 Description: Universally Unique ID library 94 The libuuid library generates and parses 128-bit universally unique 95 ids (UUIDs). A UUID is an identifier that is unique across both 96 space and time, with respect to the space of all UUIDs. A UUID can 97 be used for multiple purposes, from tagging objects with an extremely 98 short lifetime, to reliably identifying very persistent objects 99 across a network. 100 . 101 See RFC 4122 for more information. 102 103 Package: uuid-runtime 104 Section: libs 105 Priority: optional 106 Depends: passwd, libuuid1 (>> 1.40.3-1), ${shlibs:Depends}, ${misc:Depends} 107 Replaces: e2fsprogs (<= 1.40.3-1ubuntu1) 108 Architecture: any 109 Description: runtime components for the Universally Unique ID library 110 The libuuid library generates and parses 128-bit universally unique 111 ids (UUIDs). A UUID is an identifier that is unique across both 112 space and time, with respect to the space of all UUIDs. A UUID can 113 be used for multiple purposes, from tagging objects with an extremely 114 short lifetime, to reliably identifying very persistent objects 115 across a network. 116 . 117 See RFC 4122 for more information. 118 . 119 This package contains the uuidgen program and the uuidd daemon. 120 . 121 The uuidd daemon is used to generate UUIDs, especially time-based 122 UUIDs, in a secure and guaranteed-unique fashion, even in the face 123 of large numbers of threads trying to grab UUIDs running on 124 different CPUs. It is used by libuuid as well as the uuidgen 125 program. 126 127 Package: libuuid1-udeb 128 XC-Package-Type: udeb 129 Section: debian-installer 130 Priority: optional 131 Depends: ${shlibs:Depends} 132 Architecture: any 133 Description: stripped down universally unique id library, for debian-installer 134 libuuid generates and parses 128-bit universally unique ids (UUIDs). 135 See RFC 4122 for more information. 136 . 137 This is a minimal package for debian-installer. 138 139 Package: uuid-dev 140 Section: libdevel 141 Priority: extra 142 Depends: libc6-dev | libc-dev, libuuid1 (= ${mainBinary}), ${misc:Depends} 143 Replaces: e2fslibs-dev (<< 1.15) 144 Architecture: any 145 Description: universally unique id library - headers and static libraries 146 libuuid generates and parses 128-bit universally unique ids (UUIDs). 147 See RFC 4122 for more information. 148 . 149 This package contains the development environment for the uuid library. 150 151 Package: libblkid1 152 Section: libs 153 Depends: ${shlibs:Depends}, ${misc:Depends} 154 Architecture: any 155 Description: block device id library 156 The blkid library which allows system programs like fsck and 157 mount to quickly and easily find block devices by filesystem UUID and 158 LABEL. This allows system administrators to avoid specifying 159 filesystems by hard-coded device names, but via a logical naming 160 system instead. 161 162 Package: libblkid1-udeb 163 XC-Package-Type: udeb 164 Section: debian-installer 165 Priority: optional 166 Depends: ${shlibs:Depends}, ${misc:Depends} 167 Architecture: any 168 Description: stripped down block device id library, for debian-installer 169 The blkid library which allows system programs like fsck and 170 mount to quickly and easily find block devices by filesystem UUID and 171 LABEL. This allows system administrators to avoid specifiying 172 filesystems by hard-coded device names, but via a logical naming 173 system instead. 174 . 175 This is a minimal package for debian-installer. 176 177 Package: libblkid-dev 178 Section: libdevel 179 Priority: extra 180 Depends: libc6-dev | libc-dev, libblkid1 (= ${binary:Version}), ${misc:Depends} 181 Architecture: any 182 Description: block device id library - headers and static libraries 183 The blkid library which allows system programs like fsck and 184 mount to quickly and easily find block devices by filesystem UUID and 185 LABEL. This allows system administrators to avoid specifiying 186 filesystems by hard-coded device names, but via a logical naming 187 system instead. 188 . 189 This package contains the development environment for the blkid library. 190 '')dnl 191 192 Package: e2fsprogs-udeb 193 XC-Package-Type: udeb 194 Section: debian-installer 195 Priority: optional 196 Depends: ${shlibs:Depends}, ${misc:Depends} 197 Architecture: any 198 Description: stripped-down versions of e2fsprogs, for debian-installer 199 This package is an e2fsprogs package built for a reduced size, so that 200 it can help to save space in debian-installer. 201 . 202 Don't attempt to install this package, it has no support for a couple of 203 features you surely want. Anyway it should refuse to install. 204 205 Package: e2fslibs 206 Section: libs 207 Depends: ${shlibs:Depends}, ${misc:Depends} 208 Replaces: e2fsprogs (<< 1.34-1) 209 Provides: libext2fs2, libe2p2 210 Architecture: any 211 MULTIARCH_HEADERS 212 Description: ext2/ext3/ext4 file system libraries 213 The ext2, ext3 and ext4 file systems are successors of the original ext 214 ("extended") file system. They are the main file system types used for 215 hard disks on Debian and other Linux systems. 216 . 217 This package provides the ext2fs and e2p libraries, for userspace software 218 that directly accesses extended file systems. Programs that use libext2fs 219 include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include 220 dumpe2fs, chattr, and lsattr. 221 222 Package: e2fslibs-dev 223 Section: libdevel 224 Priority: extra 225 Depends: libc6-dev | libc-dev, comerr-dev, e2fslibs (= ${binary:Version}), ${misc:Depends} 226 Suggests: doc-base 227 Provides: ext2fs-dev, e2p-dev 228 Replaces: libkrb5-dev (<< 1.3) 229 Architecture: any 230 Description: ext2/ext3/ext4 file system libraries - headers and static libraries 231 The ext2, ext3 and ext4 file systems are successors of the original ext 232 ("extended") file system. They are the main file system types used for 233 hard disks on Debian and other Linux systems. 234 . 235 This package contains the development environment for the ext2fs and e2p 236 libraries. 237 238 Package: e2fsprogs 239 Essential: yes 240 ifdef(`UTIL_LINUX_NG', 241 ``Pre-Depends: ${shlibs:Depends}, ${misc:Depends}, util-linux (>= 2.15~rc1-1) 242 '', 243 ``Pre-Depends: ${shlibs:Depends}, ${misc:Depends} 244 '')dnl 245 Multi-Arch: foreign 246 Suggests: gpart, parted, e2fsck-static 247 Conflicts: dump (<< 0.4b4-4), quota (<< 1.55-8.1), initscripts (<< 2.85-4), sysvinit (<< 2.85-4) 248 Replaces: hurd (<= 20040301-1), libblkid1 (<< 1.38+1.39-WIP-2005.12.10-2), libuuid1 (<< 1.38+1.39-WIP-2005.12.10-2) 249 Architecture: any 250 Description: ext2/ext3/ext4 file system utilities 251 The ext2, ext3 and ext4 file systems are successors of the original ext 252 ("extended") file system. They are the main file system types used for 253 hard disks on Debian and other Linux systems. 254 . 255 This package contains programs for creating, checking, and maintaining 256 ext2/3/4-based file systems. 257 258 Package: e2fsprogs-dbg 259 Section: debug 260 Priority: extra 261 Depends: e2fsprogs (= ${binary:Version}), ${misc:Depends} 262 Architecture: any 263 Description: debugging information for e2fsprogs 264 This package includes the debug information useful for debugging e2fsprogs 265 and its libraries, contained in the e2fsprogs and e2fsck-static packages. 266 The debug information is used for execution tracing and core 267 dump analysis. 268 ifdef(`UTIL_LINUX_NG',,`` 269 Package: uuid-runtime-dbg 270 Section: debug 271 Priority: extra 272 Depends: uuid-runtime (= ${binary:Version}), ${misc:Depends} 273 Architecture: any 274 Description: debugging information for uuid-runtime 275 This package includes the debug information useful for debugging the 276 uuid runtime programs, contained in the uuid-runtime package. 277 The debugging information is used for execution tracing and core 278 dump analysis. 279 '')dnl 280 281 Package: e2fslibs-dbg 282 Section: debug 283 Priority: extra 284 Depends: e2fslibs (= ${binary:Version}), ${misc:Depends} 285 Architecture: any 286 Description: debugging information for e2fslibs 287 This package includes the debug information useful for debugging the 288 ext2fs and e2p libraries, contained in the e2fslibs package. The debug 289 information is used for execution tracing and core dump analysis. 290 291 Package: libcomerr2-dbg 292 Section: debug 293 Priority: extra 294 Depends: libcomerr2 (= ${binary:Version}), ${misc:Depends} 295 Architecture: any 296 Description: debugging information for libcomerr2 297 This package includes the debug information useful for debugging the 298 com_err library, contained in the libcomerr2 package. The debugging 299 information is used for execution tracing and core dump analysis. 300 301 Package: libss2-dbg 302 Section: debug 303 Priority: extra 304 Depends: libss2 (= ${binary:Version}), ${misc:Depends} 305 Architecture: any 306 Description: debugging information for libss2 307 This package includes the debug information useful for debugging the 308 ss library, contained in the libss2 package. The debug information 309 is used for execution tracing and core dump analysis. 310 ifdef(`UTIL_LINUX_NG',,`` 311 Package: libblkid1-dbg 312 Section: debug 313 Priority: extra 314 Depends: libblkid1 (= ${binary:Version}), ${misc:Depends} 315 Architecture: any 316 Description: debugging information for libblkid1 317 This package includes the debug information useful for debugging the 318 blkid library, contained in the libblkid1 package. The debug 319 information is used for execution tracing and core dump analysis. 320 321 Package: libuuid1-dbg 322 Section: debug 323 Priority: extra 324 Depends: libuuid1 (= ${binary:Version}), ${misc:Depends} 325 Architecture: any 326 Description: debugging information for libuuid1 327 This package includes the debug information useful for debugging the 328 UUID library, contained in the libuuid1 package. The debug 329 information is used for execution tracing and core dump analysis. 330 '')dnl 331
