Home | History | Annotate | Download | only in common 
      1 @@include@@variables.include
      2 
      3 # Install the repository signing key (see also:
      4 # http://www.google.com/linuxrepositories/aboutkey.html)
      5 install_rpm_key() {
      6   # Check to see if key already exists.
      7   rpm -q gpg-pubkey-7fac5991-4615767f > /dev/null 2>&1
      8   if [ "$?" -eq "0" ]; then
      9     # Key already exists
     10     return 0
     11   fi
     12   # This is to work around a bug in RPM 4.7.0. (see http://crbug.com/22312)
     13   rpm -q gpg-pubkey-7fac5991-45f06f46 > /dev/null 2>&1
     14   if [ "$?" -eq "0" ]; then
     15     # Key already exists
     16     return 0
     17   fi
     18 
     19   # RPM on Mandriva 2009 is dumb and does not understand "rpm --import -"
     20   TMPKEY=$(mktemp /tmp/google.sig.XXXXXX)
     21   if [ -n "$TMPKEY" ]; then
     22     cat > "$TMPKEY" <<KEYDATA
     23 -----BEGIN PGP PUBLIC KEY BLOCK-----
     24 Version: GnuPG v1.4.2.2 (GNU/Linux)
     25 
     26 mQGiBEXwb0YRBADQva2NLpYXxgjNkbuP0LnPoEXruGmvi3XMIxjEUFuGNCP4Rj/a
     27 kv2E5VixBP1vcQFDRJ+p1puh8NU0XERlhpyZrVMzzS/RdWdyXf7E5S8oqNXsoD1z
     28 fvmI+i9b2EhHAA19Kgw7ifV8vMa4tkwslEmcTiwiw8lyUl28Wh4Et8SxzwCggDcA
     29 feGqtn3PP5YAdD0km4S4XeMEAJjlrqPoPv2Gf//tfznY2UyS9PUqFCPLHgFLe80u
     30 QhI2U5jt6jUKN4fHauvR6z3seSAsh1YyzyZCKxJFEKXCCqnrFSoh4WSJsbFNc4PN
     31 b0V0SqiTCkWADZyLT5wll8sWuQ5ylTf3z1ENoHf+G3um3/wk/+xmEHvj9HCTBEXP
     32 78X0A/0Tqlhc2RBnEf+AqxWvM8sk8LzJI/XGjwBvKfXe+l3rnSR2kEAvGzj5Sg0X
     33 4XmfTg4Jl8BNjWyvm2Wmjfet41LPmYJKsux3g0b8yzQxeOA4pQKKAU3Z4+rgzGmf
     34 HdwCG5MNT2A5XxD/eDd+L4fRx0HbFkIQoAi1J3YWQSiTk15fw7RMR29vZ2xlLCBJ
     35 bmMuIExpbnV4IFBhY2thZ2UgU2lnbmluZyBLZXkgPGxpbnV4LXBhY2thZ2VzLWtl
     36 eW1hc3RlckBnb29nbGUuY29tPohjBBMRAgAjAhsDBgsJCAcDAgQVAggDBBYCAwEC
     37 HgECF4AFAkYVdn8CGQEACgkQoECDD3+sWZHKSgCfdq3HtNYJLv+XZleb6HN4zOcF
     38 AJEAniSFbuv8V5FSHxeRimHx25671az+uQINBEXwb0sQCACuA8HT2nr+FM5y/kzI
     39 A51ZcC46KFtIDgjQJ31Q3OrkYP8LbxOpKMRIzvOZrsjOlFmDVqitiVc7qj3lYp6U
     40 rgNVaFv6Qu4bo2/ctjNHDDBdv6nufmusJUWq/9TwieepM/cwnXd+HMxu1XBKRVk9
     41 XyAZ9SvfcW4EtxVgysI+XlptKFa5JCqFM3qJllVohMmr7lMwO8+sxTWTXqxsptJo
     42 pZeKz+UBEEqPyw7CUIVYGC9ENEtIMFvAvPqnhj1GS96REMpry+5s9WKuLEaclWpd
     43 K3krttbDlY1NaeQUCRvBYZ8iAG9YSLHUHMTuI2oea07Rh4dtIAqPwAX8xn36JAYG
     44 2vgLAAMFB/wKqaycjWAZwIe98Yt0qHsdkpmIbarD9fGiA6kfkK/UxjL/k7tmS4Vm
     45 CljrrDZkPSQ/19mpdRcGXtb0NI9+nyM5trweTvtPw+HPkDiJlTaiCcx+izg79Fj9
     46 KcofuNb3lPdXZb9tzf5oDnmm/B+4vkeTuEZJ//IFty8cmvCpzvY+DAz1Vo9rA+Zn
     47 cpWY1n6z6oSS9AsyT/IFlWWBZZ17SpMHu+h4Bxy62+AbPHKGSujEGQhWq8ZRoJAT
     48 G0KSObnmZ7FwFWu1e9XFoUCt0bSjiJWTIyaObMrWu/LvJ3e9I87HseSJStfw6fki
     49 5og9qFEkMrIrBCp3QGuQWBq/rTdMuwNFiEkEGBECAAkFAkXwb0sCGwwACgkQoECD
     50 D3+sWZF/WACfeNAu1/1hwZtUo1bR+MWiCjpvHtwAnA1R3IHqFLQ2X3xJ40XPuAyY
     51 /FJG
     52 =Quqp
     53 -----END PGP PUBLIC KEY BLOCK-----
     54 KEYDATA
     55     rpm --import "$TMPKEY"
     56     rc=$?
     57     rm -f "$TMPKEY"
     58     if [ "$rc" -eq "0" ]; then
     59       return 0
     60     fi
     61   fi
     62   return 1
     63 }
     64 
     65 determine_rpm_package_manager() {
     66   local RELEASE
     67   LSB_RELEASE="$(which lsb_release 2> /dev/null)"
     68   if [ -x "$LSB_RELEASE" ]; then
     69     RELEASE=$(lsb_release -i 2> /dev/null | sed 's/:\t/:/' | cut -d ':' -f 2-)
     70     case $RELEASE in
     71     "Fedora")
     72       PACKAGEMANAGER=yum
     73       ;;
     74     "Mageia"|"MandrivaLinux")
     75       PACKAGEMANAGER=urpmi
     76       ;;
     77     "SUSE LINUX")
     78       PACKAGEMANAGER=yast
     79       ;;
     80     esac
     81   fi
     82 
     83   if [ "$PACKAGEMANAGER" ]; then
     84     return
     85   fi
     86 
     87   # Fallback methods that are probably unnecessary on modern systems.
     88   if [ -f "/etc/lsb-release" ]; then
     89     # file missing on Fedora, does not contain DISTRIB_ID on OpenSUSE.
     90     eval $(sed -e '/DISTRIB_ID/!d' /etc/lsb-release)
     91     case $DISTRIB_ID in
     92     MandrivaLinux)
     93       PACKAGEMANAGER=urpmi
     94       ;;
     95     esac
     96   fi
     97 
     98   if [ "$PACKAGEMANAGER" ]; then
     99     return
    100   fi
    101 
    102   if [ -f "/etc/fedora-release" ] || [ -f "/etc/redhat-release" ]; then
    103     PACKAGEMANAGER=yum
    104   elif [ -f "/etc/SuSE-release" ]; then
    105     PACKAGEMANAGER=yast
    106   elif [ -f "/etc/mandriva-release" ]; then
    107     PACKAGEMANAGER=urpmi
    108   fi
    109 }
    110 
    111 DEFAULT_ARCH="@@ARCHITECTURE@@"
    112 YUM_REPO_FILE="/etc/yum.repos.d/@@PACKAGE@@.repo"
    113 ZYPPER_REPO_FILE="/etc/zypp/repos.d/@@PACKAGE@@.repo"
    114 URPMI_REPO_FILE="/etc/urpmi/urpmi.cfg"
    115 
    116 install_yum() {
    117   install_rpm_key
    118 
    119   if [ ! "$REPOCONFIG" ]; then
    120     return 0
    121   fi
    122 
    123   if [ -d "/etc/yum.repos.d" ]; then
    124 cat > "$YUM_REPO_FILE" << REPOCONTENT
    125 [@@PACKAGE@@]
    126 name=@@PACKAGE@@
    127 baseurl=$REPOCONFIG/$DEFAULT_ARCH
    128 enabled=1
    129 gpgcheck=1
    130 REPOCONTENT
    131   fi
    132 }
    133 
    134 # This is called by the cron job, rather than in the RPM postinstall.
    135 # We cannot do this during the install when urpmi is running due to
    136 # database locking. We also need to enable the repository, and we can
    137 # only do that while we are online.
    138 # see: https://qa.mandriva.com/show_bug.cgi?id=31893
    139 configure_urpmi() {
    140   if [ ! "$REPOCONFIG" ]; then
    141     return 0
    142   fi
    143 
    144   urpmq --list-media | grep -q -s "^@@PACKAGE@@$"
    145   if [ "$?" -eq "0" ]; then
    146     # Repository already configured
    147     return 0
    148   fi
    149   urpmi.addmedia --update \
    150     "@@PACKAGE@@" "$REPOCONFIG/$DEFAULT_ARCH"
    151 }
    152 
    153 install_urpmi() {
    154   # urpmi not smart enough to pull media_info/pubkey from the repository?
    155   install_rpm_key
    156 
    157   # Defer urpmi.addmedia to configure_urpmi() in the cron job.
    158   # See comment there.
    159   #
    160   # urpmi.addmedia --update \
    161   #   "@@PACKAGE@@" "$REPOCONFIG/$DEFAULT_ARCH"
    162 }
    163 
    164 install_yast() {
    165   if [ ! "$REPOCONFIG" ]; then
    166     return 0
    167   fi
    168 
    169   # We defer adding the key to later. See comment in the cron job.
    170 
    171   # Ideally, we would run: zypper addrepo -t YUM -f \
    172   # "$REPOCONFIG/$DEFAULT_ARCH" "@@PACKAGE@@"
    173   # but that does not work when zypper is running.
    174   if [ -d "/etc/zypp/repos.d" ]; then
    175 cat > "$ZYPPER_REPO_FILE" << REPOCONTENT
    176 [@@PACKAGE@@]
    177 name=@@PACKAGE@@
    178 enabled=1
    179 autorefresh=1
    180 baseurl=$REPOCONFIG/$DEFAULT_ARCH
    181 type=rpm-md
    182 keeppackages=0
    183 REPOCONTENT
    184   fi
    185 }
    186 
    187 # Check if the automatic repository configuration is done, so we know when to
    188 # stop trying.
    189 verify_install() {
    190   # It's probably enough to see that the repo configs have been created. If they
    191   # aren't configured properly, update_bad_repo should catch that when it's run.
    192   case $1 in
    193   "yum")
    194     [ -f "$YUM_REPO_FILE" ]
    195     ;;
    196   "yast")
    197     [ -f "$ZYPPER_REPO_FILE" ]
    198     ;;
    199   "urpmi")
    200     urpmq --list-url | grep -q -s "\b@@PACKAGE@@\b"
    201     ;;
    202   esac
    203 }
    204 
    205 # Update the Google repository if it's not set correctly.
    206 update_bad_repo() {
    207   if [ ! "$REPOCONFIG" ]; then
    208     return 0
    209   fi
    210 
    211   determine_rpm_package_manager
    212 
    213   case $PACKAGEMANAGER in
    214   "yum")
    215     update_repo_file "$YUM_REPO_FILE"
    216     ;;
    217   "yast")
    218     update_repo_file "$ZYPPER_REPO_FILE"
    219     ;;
    220   "urpmi")
    221     update_urpmi_cfg
    222     ;;
    223   esac
    224 }
    225 
    226 update_repo_file() {
    227   REPO_FILE="$1"
    228 
    229   # Don't do anything if the file isn't there, since that probably means the
    230   # user disabled it.
    231   if [ ! -r "$REPO_FILE" ]; then
    232     return 0
    233   fi
    234 
    235   # Check if the correct repository configuration is in there.
    236   REPOMATCH=$(grep "^baseurl=$REPOCONFIG/$DEFAULT_ARCH" "$REPO_FILE" \
    237     2>/dev/null)
    238   # If it's there, nothing to do
    239   if [ "$REPOMATCH" ]; then
    240     return 0
    241   fi
    242 
    243   # Check if it's there but disabled by commenting out (as opposed to using the
    244   # 'enabled' setting).
    245   MATCH_DISABLED=$(grep "^[[:space:]]*#.*baseurl=$REPOCONFIG/$DEFAULT_ARCH" \
    246     "$REPO_FILE" 2>/dev/null)
    247   if [ "$MATCH_DISABLED" ]; then
    248     # It's OK for it to be disabled, as long as nothing bogus is enabled in its
    249     # place.
    250     ACTIVECONFIGS=$(grep "^baseurl=.*" "$REPO_FILE" 2>/dev/null)
    251     if [ ! "$ACTIVECONFIGS" ]; then
    252       return 0
    253     fi
    254   fi
    255 
    256   # If we get here, the correct repository wasn't found, or something else is
    257   # active, so fix it. This assumes there is a 'baseurl' setting, but if not,
    258   # then that's just another way of disabling, so we won't try to add it.
    259   sed -i -e "s,^baseurl=.*,baseurl=$REPOCONFIG/$DEFAULT_ARCH," "$REPO_FILE"
    260 }
    261 
    262 update_urpmi_cfg() {
    263   REPOCFG=$(urpmq --list-url | grep "\b@@PACKAGE@@\b")
    264   if [ ! "$REPOCFG" ]; then
    265     # Don't do anything if the repo isn't there, since that probably means the
    266     # user deleted it.
    267     return 0
    268   fi
    269 
    270   # See if it's the right repo URL
    271   REPOMATCH=$(echo "$REPOCFG" | grep "\b$REPOCONFIG/$DEFAULT_ARCH\b")
    272   # If so, nothing to do
    273   if [ "$REPOMATCH" ]; then
    274     return 0
    275   fi
    276 
    277   # Looks like it's the wrong URL, so recreate it.
    278   urpmi.removemedia "@@PACKAGE@@" && \
    279     urpmi.addmedia --update "@@PACKAGE@@" "$REPOCONFIG/$DEFAULT_ARCH"
    280 }
    281 
    282 # We only remove the repository configuration during a purge. Since RPM has
    283 # no equivalent to dpkg --purge, the code below is actually never used. We
    284 # keep it only for reference purposes, should we ever need it.
    285 #
    286 #remove_yum() {
    287 #  rm -f "$YUM_REPO_FILE"
    288 #}
    289 #
    290 #remove_urpmi() {
    291 #  # Ideally, we would run: urpmi.removemedia "@@PACKAGE@@"
    292 #  # but that does not work when urpmi is running.
    293 #  # Sentinel comment text does not work either because urpmi.update removes
    294 #  # all comments. So we just delete the entry that matches what we originally
    295 #  # inserted. If such an entry was added manually, that's tough luck.
    296 #  if [ -f "$URPMI_REPO_FILE" ]; then
    297 #    sed -i '\_^@@PACKAGE@@ $REPOCONFIG/$DEFAULT_ARCH {$_,/^}$/d' "$URPMI_REPO_FILE"
    298 #  fi
    299 #}
    300 #
    301 #remove_yast() {
    302 #  # Ideally, we would run: zypper removerepo "@@PACKAGE@@"
    303 #  # but that does not work when zypper is running.
    304 #  rm -f /etc/zypp/repos.d/@@PACKAGE@@.repo
    305 #}
    306 
    307 DEFAULT_ARCH="@@ARCHITECTURE@@"
    308 
    309 get_lib_dir() {
    310   if [ "$DEFAULT_ARCH" = "i386" ]; then
    311     LIBDIR=lib
    312   elif [ "$DEFAULT_ARCH" = "x86_64" ]; then
    313     LIBDIR=lib64
    314   else
    315     echo Unknown CPU Architecture: "$DEFAULT_ARCH"
    316     exit 1
    317   fi
    318 }
    319