1 /****************************************************************************** 2 * 3 * Copyright (C) 1999-2012 Broadcom Corporation 4 * 5 * Licensed under the Apache License, Version 2.0 (the "License"); 6 * you may not use this file except in compliance with the License. 7 * You may obtain a copy of the License at: 8 * 9 * http://www.apache.org/licenses/LICENSE-2.0 10 * 11 * Unless required by applicable law or agreed to in writing, software 12 * distributed under the License is distributed on an "AS IS" BASIS, 13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 14 * See the License for the specific language governing permissions and 15 * limitations under the License. 16 * 17 ******************************************************************************/ 18 19 /****************************************************************************** 20 * 21 * this file contains the L2CAP API definitions 22 * 23 ******************************************************************************/ 24 #ifndef L2C_API_H 25 #define L2C_API_H 26 27 #include <stdbool.h> 28 29 #include "bt_target.h" 30 #include "l2cdefs.h" 31 #include "hcidefs.h" 32 33 /***************************************************************************** 34 ** Constants 35 *****************************************************************************/ 36 37 /* Define the minimum offset that L2CAP needs in a buffer. This is made up of 38 ** HCI type(1), len(2), handle(2), L2CAP len(2) and CID(2) => 9 39 */ 40 #define L2CAP_MIN_OFFSET 13 /* plus control(2), SDU length(2) */ 41 42 /* Minimum offset for broadcast needs another two bytes for the PSM */ 43 #define L2CAP_BCST_MIN_OFFSET 11 44 45 /* ping result codes */ 46 #define L2CAP_PING_RESULT_OK 0 /* Ping reply received OK */ 47 #define L2CAP_PING_RESULT_NO_LINK 1 /* Link could not be setup */ 48 #define L2CAP_PING_RESULT_NO_RESP 2 /* Remote L2CAP did not reply */ 49 50 /* result code for L2CA_DataWrite() */ 51 #define L2CAP_DW_FAILED FALSE 52 #define L2CAP_DW_SUCCESS TRUE 53 #define L2CAP_DW_CONGESTED 2 54 55 /* Values for priority parameter to L2CA_SetAclPriority */ 56 #define L2CAP_PRIORITY_NORMAL 0 57 #define L2CAP_PRIORITY_HIGH 1 58 59 /* Values for priority parameter to L2CA_SetTxPriority */ 60 #define L2CAP_CHNL_PRIORITY_HIGH 0 61 #define L2CAP_CHNL_PRIORITY_MEDIUM 1 62 #define L2CAP_CHNL_PRIORITY_LOW 2 63 64 typedef UINT8 tL2CAP_CHNL_PRIORITY; 65 66 /* Values for Tx/Rx data rate parameter to L2CA_SetChnlDataRate */ 67 #define L2CAP_CHNL_DATA_RATE_HIGH 3 68 #define L2CAP_CHNL_DATA_RATE_MEDIUM 2 69 #define L2CAP_CHNL_DATA_RATE_LOW 1 70 #define L2CAP_CHNL_DATA_RATE_NO_TRAFFIC 0 71 72 typedef UINT8 tL2CAP_CHNL_DATA_RATE; 73 74 /* Data Packet Flags (bits 2-15 are reserved) */ 75 /* layer specific 14-15 bits are used for FCR SAR */ 76 #define L2CAP_FLUSHABLE_MASK 0x0003 77 #define L2CAP_FLUSHABLE_CH_BASED 0x0000 78 #define L2CAP_FLUSHABLE_PKT 0x0001 79 #define L2CAP_NON_FLUSHABLE_PKT 0x0002 80 81 82 /* L2CA_FlushChannel num_to_flush definitions */ 83 #define L2CAP_FLUSH_CHANS_ALL 0xffff 84 #define L2CAP_FLUSH_CHANS_GET 0x0000 85 86 87 /* special CID for Multi-AV for reporting congestion */ 88 #define L2CAP_MULTI_AV_CID 0 89 90 /* length of the HCI header block */ 91 /* HCI header(4) + SNK count(1) + FCR bits(1) + AV data length(2) */ 92 #define L2CAP_MULTI_AV_HCI_HDR_LEN 8 93 94 /* length of padding for 4 bytes align */ 95 #define L2CAP_MULTI_AV_PADDING_LEN 2 96 97 /* length of the HCI header block with padding for FCR */ 98 /* HCI header(4) + SNK count(1) + FCR bits(1) + AV data length(2) + padding(2) */ 99 #define L2CAP_MULTI_AV_HCI_HDR_LEN_WITH_PADDING 10 100 101 /* length of the L2CAP header block */ 102 /* HCI header(4) + L2CAP header(4) + padding(4) or control word(2) + FCS(2) */ 103 #define L2CAP_MULTI_AV_L2C_HDR_LEN 12 104 105 /* definition used for L2CA_SetDesireRole */ 106 #define L2CAP_ROLE_SLAVE HCI_ROLE_SLAVE 107 #define L2CAP_ROLE_MASTER HCI_ROLE_MASTER 108 #define L2CAP_ROLE_ALLOW_SWITCH 0x80 /* set this bit to allow switch at create conn */ 109 #define L2CAP_ROLE_DISALLOW_SWITCH 0x40 /* set this bit to disallow switch at create conn */ 110 #define L2CAP_ROLE_CHECK_SWITCH 0xC0 111 112 113 /* Values for 'allowed_modes' field passed in structure tL2CAP_ERTM_INFO 114 */ 115 #define L2CAP_FCR_CHAN_OPT_BASIC (1 << L2CAP_FCR_BASIC_MODE) 116 #define L2CAP_FCR_CHAN_OPT_ERTM (1 << L2CAP_FCR_ERTM_MODE) 117 #define L2CAP_FCR_CHAN_OPT_STREAM (1 << L2CAP_FCR_STREAM_MODE) 118 119 #define L2CAP_FCR_CHAN_OPT_ALL_MASK (L2CAP_FCR_CHAN_OPT_BASIC | L2CAP_FCR_CHAN_OPT_ERTM | L2CAP_FCR_CHAN_OPT_STREAM) 120 121 /* Validity check for PSM. PSM values must be odd. Also, all PSM values must 122 ** be assigned such that the least significant bit of the most sigificant 123 ** octet equals zero. 124 */ 125 #define L2C_INVALID_PSM(psm) (((psm) & 0x0101) != 0x0001) 126 #define L2C_IS_VALID_PSM(psm) (((psm) & 0x0101) == 0x0001) 127 128 /***************************************************************************** 129 ** Type Definitions 130 *****************************************************************************/ 131 132 typedef struct 133 { 134 #define L2CAP_FCR_BASIC_MODE 0x00 135 #define L2CAP_FCR_ERTM_MODE 0x03 136 #define L2CAP_FCR_STREAM_MODE 0x04 137 138 UINT8 mode; 139 140 UINT8 tx_win_sz; 141 UINT8 max_transmit; 142 UINT16 rtrans_tout; 143 UINT16 mon_tout; 144 UINT16 mps; 145 } tL2CAP_FCR_OPTS; 146 147 /* Define a structure to hold the configuration parameters. Since the 148 ** parameters are optional, for each parameter there is a boolean to 149 ** use to signify its presence or absence. 150 */ 151 typedef struct 152 { 153 UINT16 result; /* Only used in confirm messages */ 154 BOOLEAN mtu_present; 155 UINT16 mtu; 156 BOOLEAN qos_present; 157 FLOW_SPEC qos; 158 BOOLEAN flush_to_present; 159 UINT16 flush_to; 160 BOOLEAN fcr_present; 161 tL2CAP_FCR_OPTS fcr; 162 BOOLEAN fcs_present; /* Optionally bypasses FCS checks */ 163 UINT8 fcs; /* '0' if desire is to bypass FCS, otherwise '1' */ 164 BOOLEAN ext_flow_spec_present; 165 tHCI_EXT_FLOW_SPEC ext_flow_spec; 166 UINT16 flags; /* bit 0: 0-no continuation, 1-continuation */ 167 } tL2CAP_CFG_INFO; 168 169 /* L2CAP channel configured field bitmap */ 170 #define L2CAP_CH_CFG_MASK_MTU 0x0001 171 #define L2CAP_CH_CFG_MASK_QOS 0x0002 172 #define L2CAP_CH_CFG_MASK_FLUSH_TO 0x0004 173 #define L2CAP_CH_CFG_MASK_FCR 0x0008 174 #define L2CAP_CH_CFG_MASK_FCS 0x0010 175 #define L2CAP_CH_CFG_MASK_EXT_FLOW_SPEC 0x0020 176 177 typedef UINT16 tL2CAP_CH_CFG_BITS; 178 179 /********************************* 180 ** Callback Functions Prototypes 181 **********************************/ 182 183 /* Connection indication callback prototype. Parameters are 184 ** BD Address of remote 185 ** Local CID assigned to the connection 186 ** PSM that the remote wants to connect to 187 ** Identifier that the remote sent 188 */ 189 typedef void (tL2CA_CONNECT_IND_CB) (BD_ADDR, UINT16, UINT16, UINT8); 190 191 192 /* Connection confirmation callback prototype. Parameters are 193 ** Local CID 194 ** Result - 0 = connected, non-zero means failure reason 195 */ 196 typedef void (tL2CA_CONNECT_CFM_CB) (UINT16, UINT16); 197 198 199 /* Connection pending callback prototype. Parameters are 200 ** Local CID 201 */ 202 typedef void (tL2CA_CONNECT_PND_CB) (UINT16); 203 204 205 /* Configuration indication callback prototype. Parameters are 206 ** Local CID assigned to the connection 207 ** Pointer to configuration info 208 */ 209 typedef void (tL2CA_CONFIG_IND_CB) (UINT16, tL2CAP_CFG_INFO *); 210 211 212 /* Configuration confirm callback prototype. Parameters are 213 ** Local CID assigned to the connection 214 ** Pointer to configuration info 215 */ 216 typedef void (tL2CA_CONFIG_CFM_CB) (UINT16, tL2CAP_CFG_INFO *); 217 218 219 /* Disconnect indication callback prototype. Parameters are 220 ** Local CID 221 ** Boolean whether upper layer should ack this 222 */ 223 typedef void (tL2CA_DISCONNECT_IND_CB) (UINT16, BOOLEAN); 224 225 226 /* Disconnect confirm callback prototype. Parameters are 227 ** Local CID 228 ** Result 229 */ 230 typedef void (tL2CA_DISCONNECT_CFM_CB) (UINT16, UINT16); 231 232 233 /* QOS Violation indication callback prototype. Parameters are 234 ** BD Address of violating device 235 */ 236 typedef void (tL2CA_QOS_VIOLATION_IND_CB) (BD_ADDR); 237 238 239 /* Data received indication callback prototype. Parameters are 240 ** Local CID 241 ** Address of buffer 242 */ 243 typedef void (tL2CA_DATA_IND_CB) (UINT16, BT_HDR *); 244 245 246 /* Echo response callback prototype. Note that this is not included in the 247 ** registration information, but is passed to L2CAP as part of the API to 248 ** actually send an echo request. Parameters are 249 ** Result 250 */ 251 typedef void (tL2CA_ECHO_RSP_CB) (UINT16); 252 253 254 /* Callback function prototype to pass broadcom specific echo response */ 255 /* to the upper layer */ 256 typedef void (tL2CA_ECHO_DATA_CB) (BD_ADDR, UINT16, UINT8 *); 257 258 259 /* Congestion status callback protype. This callback is optional. If 260 ** an application tries to send data when the transmit queue is full, 261 ** the data will anyways be dropped. The parameter is: 262 ** Local CID 263 ** TRUE if congested, FALSE if uncongested 264 */ 265 typedef void (tL2CA_CONGESTION_STATUS_CB) (UINT16, BOOLEAN); 266 267 /* Callback prototype for number of packets completed events. 268 ** This callback notifies the application when Number of Completed Packets 269 ** event has been received. 270 ** This callback is originally designed for 3DG devices. 271 ** The parameter is: 272 ** peer BD_ADDR 273 */ 274 typedef void (tL2CA_NOCP_CB) (BD_ADDR); 275 276 /* Transmit complete callback protype. This callback is optional. If 277 ** set, L2CAP will call it when packets are sent or flushed. If the 278 ** count is 0xFFFF, it means all packets are sent for that CID (eRTM 279 ** mode only). The parameters are: 280 ** Local CID 281 ** Number of SDUs sent or dropped 282 */ 283 typedef void (tL2CA_TX_COMPLETE_CB) (UINT16, UINT16); 284 285 /* Define the structure that applications use to register with 286 ** L2CAP. This structure includes callback functions. All functions 287 ** MUST be provided, with the exception of the "connect pending" 288 ** callback and "congestion status" callback. 289 */ 290 typedef struct 291 { 292 tL2CA_CONNECT_IND_CB *pL2CA_ConnectInd_Cb; 293 tL2CA_CONNECT_CFM_CB *pL2CA_ConnectCfm_Cb; 294 tL2CA_CONNECT_PND_CB *pL2CA_ConnectPnd_Cb; 295 tL2CA_CONFIG_IND_CB *pL2CA_ConfigInd_Cb; 296 tL2CA_CONFIG_CFM_CB *pL2CA_ConfigCfm_Cb; 297 tL2CA_DISCONNECT_IND_CB *pL2CA_DisconnectInd_Cb; 298 tL2CA_DISCONNECT_CFM_CB *pL2CA_DisconnectCfm_Cb; 299 tL2CA_QOS_VIOLATION_IND_CB *pL2CA_QoSViolationInd_Cb; 300 tL2CA_DATA_IND_CB *pL2CA_DataInd_Cb; 301 tL2CA_CONGESTION_STATUS_CB *pL2CA_CongestionStatus_Cb; 302 tL2CA_TX_COMPLETE_CB *pL2CA_TxComplete_Cb; 303 304 } tL2CAP_APPL_INFO; 305 306 /* Define the structure that applications use to create or accept 307 ** connections with enhanced retransmission mode. 308 */ 309 typedef struct 310 { 311 UINT8 preferred_mode; 312 UINT8 allowed_modes; 313 UINT8 user_rx_pool_id; 314 UINT8 user_tx_pool_id; 315 UINT8 fcr_rx_pool_id; 316 UINT8 fcr_tx_pool_id; 317 318 } tL2CAP_ERTM_INFO; 319 320 #define L2CA_REGISTER(a,b,c) L2CA_Register(a,(tL2CAP_APPL_INFO *)b) 321 #define L2CA_DEREGISTER(a) L2CA_Deregister(a) 322 #define L2CA_CONNECT_REQ(a,b,c,d) L2CA_ErtmConnectReq(a,b,c) 323 #define L2CA_CONNECT_RSP(a,b,c,d,e,f,g) L2CA_ErtmConnectRsp(a,b,c,d,e,f) 324 #define L2CA_CONFIG_REQ(a,b) L2CA_ConfigReq(a,b) 325 #define L2CA_CONFIG_RSP(a,b) L2CA_ConfigRsp(a,b) 326 #define L2CA_DISCONNECT_REQ(a) L2CA_DisconnectReq(a) 327 #define L2CA_DISCONNECT_RSP(a) L2CA_DisconnectRsp(a) 328 #define L2CA_DATA_WRITE(a, b) L2CA_DataWrite(a, b) 329 330 /***************************************************************************** 331 ** External Function Declarations 332 *****************************************************************************/ 333 #ifdef __cplusplus 334 extern "C" 335 { 336 #endif 337 338 /******************************************************************************* 339 ** 340 ** Function L2CA_Register 341 ** 342 ** Description Other layers call this function to register for L2CAP 343 ** services. 344 ** 345 ** Returns PSM to use or zero if error. Typically, the PSM returned 346 ** is the same as was passed in, but for an outgoing-only 347 ** connection to a dynamic PSM, a "virtual" PSM is returned 348 ** and should be used in the calls to L2CA_ConnectReq() and 349 ** BTM_SetSecurityLevel(). 350 ** 351 *******************************************************************************/ 352 extern UINT16 L2CA_Register (UINT16 psm, tL2CAP_APPL_INFO *p_cb_info); 353 354 /******************************************************************************* 355 ** 356 ** Function L2CA_Deregister 357 ** 358 ** Description Other layers call this function to deregister for L2CAP 359 ** services. 360 ** 361 ** Returns void 362 ** 363 *******************************************************************************/ 364 extern void L2CA_Deregister (UINT16 psm); 365 366 /******************************************************************************* 367 ** 368 ** Function L2CA_AllocatePSM 369 ** 370 ** Description Other layers call this function to find an unused PSM for L2CAP 371 ** services. 372 ** 373 ** Returns PSM to use. 374 ** 375 *******************************************************************************/ 376 extern UINT16 L2CA_AllocatePSM(void); 377 378 /******************************************************************************* 379 ** 380 ** Function L2CA_ConnectReq 381 ** 382 ** Description Higher layers call this function to create an L2CAP connection. 383 ** Note that the connection is not established at this time, but 384 ** connection establishment gets started. The callback function 385 ** will be invoked when connection establishes or fails. 386 ** 387 ** Returns the CID of the connection, or 0 if it failed to start 388 ** 389 *******************************************************************************/ 390 extern UINT16 L2CA_ConnectReq (UINT16 psm, BD_ADDR p_bd_addr); 391 392 /******************************************************************************* 393 ** 394 ** Function L2CA_ConnectRsp 395 ** 396 ** Description Higher layers call this function to accept an incoming 397 ** L2CAP connection, for which they had gotten an connect 398 ** indication callback. 399 ** 400 ** Returns TRUE for success, FALSE for failure 401 ** 402 *******************************************************************************/ 403 extern BOOLEAN L2CA_ConnectRsp (BD_ADDR p_bd_addr, UINT8 id, UINT16 lcid, 404 UINT16 result, UINT16 status); 405 406 /******************************************************************************* 407 ** 408 ** Function L2CA_ErtmConnectReq 409 ** 410 ** Description Higher layers call this function to create an L2CAP connection 411 ** that needs to use Enhanced Retransmission Mode. 412 ** Note that the connection is not established at this time, but 413 ** connection establishment gets started. The callback function 414 ** will be invoked when connection establishes or fails. 415 ** 416 ** Returns the CID of the connection, or 0 if it failed to start 417 ** 418 *******************************************************************************/ 419 extern UINT16 L2CA_ErtmConnectReq (UINT16 psm, BD_ADDR p_bd_addr, 420 tL2CAP_ERTM_INFO *p_ertm_info); 421 422 // This function sets the callback routines for the L2CAP connection referred to by 423 // |local_cid|. The callback routines can only be modified for outgoing connections 424 // established by |L2CA_ConnectReq| or accepted incoming connections. |callbacks| 425 // must not be NULL. This function returns true if the callbacks could be updated, 426 // false if not (e.g. |local_cid| was not found). 427 bool L2CA_SetConnectionCallbacks(uint16_t local_cid, const tL2CAP_APPL_INFO *callbacks); 428 429 /******************************************************************************* 430 ** 431 ** Function L2CA_ErtmConnectRsp 432 ** 433 ** Description Higher layers call this function to accept an incoming 434 ** L2CAP connection, for which they had gotten an connect 435 ** indication callback, and for which the higher layer wants 436 ** to use Enhanced Retransmission Mode. 437 ** 438 ** Returns TRUE for success, FALSE for failure 439 ** 440 *******************************************************************************/ 441 extern BOOLEAN L2CA_ErtmConnectRsp (BD_ADDR p_bd_addr, UINT8 id, UINT16 lcid, 442 UINT16 result, UINT16 status, 443 tL2CAP_ERTM_INFO *p_ertm_info); 444 445 /******************************************************************************* 446 ** 447 ** Function L2CA_ConfigReq 448 ** 449 ** Description Higher layers call this function to send configuration. 450 ** 451 ** Returns TRUE if configuration sent, else FALSE 452 ** 453 *******************************************************************************/ 454 extern BOOLEAN L2CA_ConfigReq (UINT16 cid, tL2CAP_CFG_INFO *p_cfg); 455 456 /******************************************************************************* 457 ** 458 ** Function L2CA_ConfigRsp 459 ** 460 ** Description Higher layers call this function to send a configuration 461 ** response. 462 ** 463 ** Returns TRUE if configuration response sent, else FALSE 464 ** 465 *******************************************************************************/ 466 extern BOOLEAN L2CA_ConfigRsp (UINT16 cid, tL2CAP_CFG_INFO *p_cfg); 467 468 /******************************************************************************* 469 ** 470 ** Function L2CA_DisconnectReq 471 ** 472 ** Description Higher layers call this function to disconnect a channel. 473 ** 474 ** Returns TRUE if disconnect sent, else FALSE 475 ** 476 *******************************************************************************/ 477 extern BOOLEAN L2CA_DisconnectReq (UINT16 cid); 478 479 /******************************************************************************* 480 ** 481 ** Function L2CA_DisconnectRsp 482 ** 483 ** Description Higher layers call this function to acknowledge the 484 ** disconnection of a channel. 485 ** 486 ** Returns void 487 ** 488 *******************************************************************************/ 489 extern BOOLEAN L2CA_DisconnectRsp (UINT16 cid); 490 491 /******************************************************************************* 492 ** 493 ** Function L2CA_DataWrite 494 ** 495 ** Description Higher layers call this function to write data. 496 ** 497 ** Returns L2CAP_DW_SUCCESS, if data accepted, else FALSE 498 ** L2CAP_DW_CONGESTED, if data accepted and the channel is congested 499 ** L2CAP_DW_FAILED, if error 500 ** 501 *******************************************************************************/ 502 extern UINT8 L2CA_DataWrite (UINT16 cid, BT_HDR *p_data); 503 504 /******************************************************************************* 505 ** 506 ** Function L2CA_Ping 507 ** 508 ** Description Higher layers call this function to send an echo request. 509 ** 510 ** Returns TRUE if echo request sent, else FALSE. 511 ** 512 *******************************************************************************/ 513 extern BOOLEAN L2CA_Ping (BD_ADDR p_bd_addr, tL2CA_ECHO_RSP_CB *p_cb); 514 515 /******************************************************************************* 516 ** 517 ** Function L2CA_Echo 518 ** 519 ** Description Higher layers call this function to send an echo request 520 ** with application-specific data. 521 ** 522 ** Returns TRUE if echo request sent, else FALSE. 523 ** 524 *******************************************************************************/ 525 extern BOOLEAN L2CA_Echo (BD_ADDR p_bd_addr, BT_HDR *p_data, tL2CA_ECHO_DATA_CB *p_callback); 526 527 // Given a local channel identifier, |lcid|, this function returns the bound remote 528 // channel identifier, |rcid|, and the ACL link handle, |handle|. If |lcid| is not 529 // known or is invalid, this function returns false and does not modify the values 530 // pointed at by |rcid| and |handle|. |rcid| and |handle| may be NULL. 531 bool L2CA_GetIdentifiers(uint16_t lcid, uint16_t *rcid, uint16_t *handle); 532 533 /******************************************************************************* 534 ** 535 ** Function L2CA_SetIdleTimeout 536 ** 537 ** Description Higher layers call this function to set the idle timeout for 538 ** a connection, or for all future connections. The "idle timeout" 539 ** is the amount of time that a connection can remain up with 540 ** no L2CAP channels on it. A timeout of zero means that the 541 ** connection will be torn down immediately when the last channel 542 ** is removed. A timeout of 0xFFFF means no timeout. Values are 543 ** in seconds. 544 ** 545 ** Returns TRUE if command succeeded, FALSE if failed 546 ** 547 *******************************************************************************/ 548 extern BOOLEAN L2CA_SetIdleTimeout (UINT16 cid, UINT16 timeout, 549 BOOLEAN is_global); 550 551 /******************************************************************************* 552 ** 553 ** Function L2CA_SetIdleTimeoutByBdAddr 554 ** 555 ** Description Higher layers call this function to set the idle timeout for 556 ** a connection. The "idle timeout" is the amount of time that 557 ** a connection can remain up with no L2CAP channels on it. 558 ** A timeout of zero means that the connection will be torn 559 ** down immediately when the last channel is removed. 560 ** A timeout of 0xFFFF means no timeout. Values are in seconds. 561 ** A bd_addr is the remote BD address. If bd_addr = BT_BD_ANY, 562 ** then the idle timeouts for all active l2cap links will be 563 ** changed. 564 ** 565 ** Returns TRUE if command succeeded, FALSE if failed 566 ** 567 ** NOTE This timeout applies to all logical channels active on the 568 ** ACL link. 569 *******************************************************************************/ 570 extern BOOLEAN L2CA_SetIdleTimeoutByBdAddr(BD_ADDR bd_addr, UINT16 timeout, 571 tBT_TRANSPORT transport); 572 573 /******************************************************************************* 574 ** 575 ** Function L2CA_SetTraceLevel 576 ** 577 ** Description This function sets the trace level for L2CAP. If called with 578 ** a value of 0xFF, it simply reads the current trace level. 579 ** 580 ** Returns the new (current) trace level 581 ** 582 *******************************************************************************/ 583 extern UINT8 L2CA_SetTraceLevel (UINT8 trace_level); 584 585 /******************************************************************************* 586 ** 587 ** Function L2CA_SetDesireRole 588 ** 589 ** Description This function sets the desire role for L2CAP. 590 ** If the new role is L2CAP_ROLE_ALLOW_SWITCH, allow switch on 591 ** HciCreateConnection. 592 ** If the new role is L2CAP_ROLE_DISALLOW_SWITCH, do not allow switch on 593 ** HciCreateConnection. 594 ** 595 ** If the new role is a valid role (HCI_ROLE_MASTER or HCI_ROLE_SLAVE), 596 ** the desire role is set to the new value. Otherwise, it is not changed. 597 ** 598 ** Returns the new (current) role 599 ** 600 *******************************************************************************/ 601 extern UINT8 L2CA_SetDesireRole (UINT8 new_role); 602 603 /******************************************************************************* 604 ** 605 ** Function L2CA_LocalLoopbackReq 606 ** 607 ** Description This function sets up a CID for local loopback 608 ** 609 ** Returns CID of 0 if none. 610 ** 611 *******************************************************************************/ 612 extern UINT16 L2CA_LocalLoopbackReq (UINT16 psm, UINT16 handle, BD_ADDR p_bd_addr); 613 614 /******************************************************************************* 615 ** 616 ** Function L2CA_FlushChannel 617 ** 618 ** Description This function flushes none, some or all buffers queued up 619 ** for xmission for a particular CID. If called with 620 ** L2CAP_FLUSH_CHANS_GET (0), it simply returns the number 621 ** of buffers queued for that CID L2CAP_FLUSH_CHANS_ALL (0xffff) 622 ** flushes all buffers. All other values specifies the maximum 623 ** buffers to flush. 624 ** 625 ** Returns Number of buffers left queued for that CID 626 ** 627 *******************************************************************************/ 628 extern UINT16 L2CA_FlushChannel (UINT16 lcid, UINT16 num_to_flush); 629 630 631 /******************************************************************************* 632 ** 633 ** Function L2CA_SetAclPriority 634 ** 635 ** Description Sets the transmission priority for an ACL channel. 636 ** (For initial implementation only two values are valid. 637 ** L2CAP_PRIORITY_NORMAL and L2CAP_PRIORITY_HIGH). 638 ** 639 ** Returns TRUE if a valid channel, else FALSE 640 ** 641 *******************************************************************************/ 642 extern BOOLEAN L2CA_SetAclPriority (BD_ADDR bd_addr, UINT8 priority); 643 644 /******************************************************************************* 645 ** 646 ** Function L2CA_FlowControl 647 ** 648 ** Description Higher layers call this function to flow control a channel. 649 ** 650 ** data_enabled - TRUE data flows, FALSE data is stopped 651 ** 652 ** Returns TRUE if valid channel, else FALSE 653 ** 654 *******************************************************************************/ 655 extern BOOLEAN L2CA_FlowControl (UINT16 cid, BOOLEAN data_enabled); 656 657 /******************************************************************************* 658 ** 659 ** Function L2CA_SendTestSFrame 660 ** 661 ** Description Higher layers call this function to send a test S-frame. 662 ** 663 ** Returns TRUE if valid Channel, else FALSE 664 ** 665 *******************************************************************************/ 666 extern BOOLEAN L2CA_SendTestSFrame (UINT16 cid, UINT8 sup_type, 667 UINT8 back_track); 668 669 /******************************************************************************* 670 ** 671 ** Function L2CA_SetTxPriority 672 ** 673 ** Description Sets the transmission priority for a channel. (FCR Mode) 674 ** 675 ** Returns TRUE if a valid channel, else FALSE 676 ** 677 *******************************************************************************/ 678 extern BOOLEAN L2CA_SetTxPriority (UINT16 cid, tL2CAP_CHNL_PRIORITY priority); 679 680 /******************************************************************************* 681 ** 682 ** Function L2CA_RegForNoCPEvt 683 ** 684 ** Description Register callback for Number of Completed Packets event. 685 ** 686 ** Input Param p_cb - callback for Number of completed packets event 687 ** p_bda - BT address of remote device 688 ** 689 ** Returns 690 ** 691 *******************************************************************************/ 692 extern BOOLEAN L2CA_RegForNoCPEvt(tL2CA_NOCP_CB *p_cb, BD_ADDR p_bda); 693 694 /******************************************************************************* 695 ** 696 ** Function L2CA_SetChnlDataRate 697 ** 698 ** Description Sets the tx/rx data rate for a channel. 699 ** 700 ** Returns TRUE if a valid channel, else FALSE 701 ** 702 *******************************************************************************/ 703 extern BOOLEAN L2CA_SetChnlDataRate (UINT16 cid, tL2CAP_CHNL_DATA_RATE tx, tL2CAP_CHNL_DATA_RATE rx); 704 705 typedef void (tL2CA_RESERVE_CMPL_CBACK) (void); 706 707 /******************************************************************************* 708 ** 709 ** Function L2CA_SetFlushTimeout 710 ** 711 ** Description This function set the automatic flush time out in Baseband 712 ** for ACL-U packets. 713 ** BdAddr : the remote BD address of ACL link. If it is BT_DB_ANY 714 ** then the flush time out will be applied to all ACL link. 715 ** FlushTimeout: flush time out in ms 716 ** 0x0000 : No automatic flush 717 ** L2CAP_NO_RETRANSMISSION : No retransmission 718 ** 0x0002 - 0xFFFE : flush time out, if (flush_tout*8)+3/5) 719 ** <= HCI_MAX_AUTO_FLUSH_TOUT (in 625us slot). 720 ** Otherwise, return FALSE. 721 ** L2CAP_NO_AUTOMATIC_FLUSH : No automatic flush 722 ** 723 ** Returns TRUE if command succeeded, FALSE if failed 724 ** 725 ** NOTE This flush timeout applies to all logical channels active on the 726 ** ACL link. 727 *******************************************************************************/ 728 extern BOOLEAN L2CA_SetFlushTimeout (BD_ADDR bd_addr, UINT16 flush_tout); 729 730 /******************************************************************************* 731 ** 732 ** Function L2CA_DataWriteEx 733 ** 734 ** Description Higher layers call this function to write data with extended 735 ** flags. 736 ** flags : L2CAP_FLUSHABLE_CH_BASED 737 ** L2CAP_FLUSHABLE_PKT 738 ** L2CAP_NON_FLUSHABLE_PKT 739 ** 740 ** Returns L2CAP_DW_SUCCESS, if data accepted, else FALSE 741 ** L2CAP_DW_CONGESTED, if data accepted and the channel is congested 742 ** L2CAP_DW_FAILED, if error 743 ** 744 *******************************************************************************/ 745 extern UINT8 L2CA_DataWriteEx (UINT16 cid, BT_HDR *p_data, UINT16 flags); 746 747 /******************************************************************************* 748 ** 749 ** Function L2CA_SetChnlFlushability 750 ** 751 ** Description Higher layers call this function to set a channels 752 ** flushability flags 753 ** 754 ** Returns TRUE if CID found, else FALSE 755 ** 756 *******************************************************************************/ 757 extern BOOLEAN L2CA_SetChnlFlushability (UINT16 cid, BOOLEAN is_flushable); 758 759 /******************************************************************************* 760 ** 761 ** Function L2CA_GetPeerFeatures 762 ** 763 ** Description Get a peers features and fixed channel map 764 ** 765 ** Parameters: BD address of the peer 766 ** Pointers to features and channel mask storage area 767 ** 768 ** Return value: TRUE if peer is connected 769 ** 770 *******************************************************************************/ 771 extern BOOLEAN L2CA_GetPeerFeatures (BD_ADDR bd_addr, UINT32 *p_ext_feat, UINT8 *p_chnl_mask); 772 773 /******************************************************************************* 774 ** 775 ** Function L2CA_GetBDAddrbyHandle 776 ** 777 ** Description Get BD address for the given HCI handle 778 ** 779 ** Parameters: HCI handle 780 ** BD address of the peer 781 ** 782 ** Return value: TRUE if found lcb for the given handle, FALSE otherwise 783 ** 784 *******************************************************************************/ 785 extern BOOLEAN L2CA_GetBDAddrbyHandle (UINT16 handle, BD_ADDR bd_addr); 786 787 /******************************************************************************* 788 ** 789 ** Function L2CA_GetChnlFcrMode 790 ** 791 ** Description Get the channel FCR mode 792 ** 793 ** Parameters: Local CID 794 ** 795 ** Return value: Channel mode 796 ** 797 *******************************************************************************/ 798 extern UINT8 L2CA_GetChnlFcrMode (UINT16 lcid); 799 800 801 /******************************************************************************* 802 ** 803 ** UCD callback prototypes 804 ** 805 *******************************************************************************/ 806 807 /* UCD discovery. Parameters are 808 ** BD Address of remote 809 ** Data Type 810 ** Data 811 */ 812 #define L2CAP_UCD_INFO_TYPE_RECEPTION 0x01 813 #define L2CAP_UCD_INFO_TYPE_MTU 0x02 814 815 typedef void (tL2CA_UCD_DISCOVER_CB) (BD_ADDR, UINT8, UINT32); 816 817 /* UCD data received. Parameters are 818 ** BD Address of remote 819 ** Pointer to buffer with data 820 */ 821 typedef void (tL2CA_UCD_DATA_CB) (BD_ADDR, BT_HDR *); 822 823 /* Congestion status callback protype. This callback is optional. If 824 ** an application tries to send data when the transmit queue is full, 825 ** the data will anyways be dropped. The parameter is: 826 ** remote BD_ADDR 827 ** TRUE if congested, FALSE if uncongested 828 */ 829 typedef void (tL2CA_UCD_CONGESTION_STATUS_CB) (BD_ADDR, BOOLEAN); 830 831 /* UCD registration info (the callback addresses and PSM) 832 */ 833 typedef struct 834 { 835 tL2CA_UCD_DISCOVER_CB *pL2CA_UCD_Discover_Cb; 836 tL2CA_UCD_DATA_CB *pL2CA_UCD_Data_Cb; 837 tL2CA_UCD_CONGESTION_STATUS_CB *pL2CA_UCD_Congestion_Status_Cb; 838 } tL2CAP_UCD_CB_INFO; 839 840 /******************************************************************************* 841 ** 842 ** Function L2CA_UcdRegister 843 ** 844 ** Description Register PSM on UCD. 845 ** 846 ** Parameters: tL2CAP_UCD_CB_INFO 847 ** 848 ** Return value: TRUE if successs 849 ** 850 *******************************************************************************/ 851 extern BOOLEAN L2CA_UcdRegister ( UINT16 psm, tL2CAP_UCD_CB_INFO *p_cb_info ); 852 853 /******************************************************************************* 854 ** 855 ** Function L2CA_UcdDeregister 856 ** 857 ** Description Deregister PSM on UCD. 858 ** 859 ** Parameters: PSM 860 ** 861 ** Return value: TRUE if successs 862 ** 863 *******************************************************************************/ 864 extern BOOLEAN L2CA_UcdDeregister ( UINT16 psm ); 865 866 /******************************************************************************* 867 ** 868 ** Function L2CA_UcdDiscover 869 ** 870 ** Description Discover UCD of remote device. 871 ** 872 ** Parameters: PSM 873 ** BD_ADDR of remote device 874 ** info_type : L2CAP_UCD_INFO_TYPE_RECEPTION 875 ** L2CAP_UCD_INFO_TYPE_MTU 876 ** 877 ** 878 ** Return value: TRUE if successs 879 ** 880 *******************************************************************************/ 881 extern BOOLEAN L2CA_UcdDiscover ( UINT16 psm, BD_ADDR rem_bda, UINT8 info_type ); 882 883 /******************************************************************************* 884 ** 885 ** Function L2CA_UcdDataWrite 886 ** 887 ** Description Send UCD to remote device 888 ** 889 ** Parameters: PSM 890 ** BD Address of remote 891 ** Pointer to buffer of type BT_HDR 892 ** flags : L2CAP_FLUSHABLE_CH_BASED 893 ** L2CAP_FLUSHABLE_PKT 894 ** L2CAP_NON_FLUSHABLE_PKT 895 ** 896 ** Return value L2CAP_DW_SUCCESS, if data accepted 897 ** L2CAP_DW_FAILED, if error 898 ** 899 *******************************************************************************/ 900 extern UINT16 L2CA_UcdDataWrite (UINT16 psm, BD_ADDR rem_bda, BT_HDR *p_buf, UINT16 flags); 901 902 /******************************************************************************* 903 ** 904 ** Function L2CA_UcdSetIdleTimeout 905 ** 906 ** Description Set UCD Idle timeout. 907 ** 908 ** Parameters: BD Addr 909 ** Timeout in second 910 ** 911 ** Return value: TRUE if successs 912 ** 913 *******************************************************************************/ 914 extern BOOLEAN L2CA_UcdSetIdleTimeout ( BD_ADDR rem_bda, UINT16 timeout ); 915 916 /******************************************************************************* 917 ** 918 ** Function L2CA_UCDSetTxPriority 919 ** 920 ** Description Sets the transmission priority for a connectionless channel. 921 ** 922 ** Returns TRUE if a valid channel, else FALSE 923 ** 924 *******************************************************************************/ 925 extern BOOLEAN L2CA_UCDSetTxPriority ( BD_ADDR rem_bda, tL2CAP_CHNL_PRIORITY priority ); 926 927 928 /******************************************************************************* 929 ** 930 ** Fixed Channel callback prototypes 931 ** 932 *******************************************************************************/ 933 934 /* Fixed channel connected and disconnected. Parameters are 935 ** channel 936 ** BD Address of remote 937 ** TRUE if channel is connected, FALSE if disconnected 938 ** Reason for connection failure 939 ** transport : physical transport, BR/EDR or LE 940 */ 941 typedef void (tL2CA_FIXED_CHNL_CB) (UINT16, BD_ADDR, BOOLEAN, UINT16, tBT_TRANSPORT); 942 943 /* Signalling data received. Parameters are 944 ** channel 945 ** BD Address of remote 946 ** Pointer to buffer with data 947 */ 948 typedef void (tL2CA_FIXED_DATA_CB) (UINT16, BD_ADDR, BT_HDR *); 949 950 /* Congestion status callback protype. This callback is optional. If 951 ** an application tries to send data when the transmit queue is full, 952 ** the data will anyways be dropped. The parameter is: 953 ** remote BD_ADDR 954 ** TRUE if congested, FALSE if uncongested 955 */ 956 typedef void (tL2CA_FIXED_CONGESTION_STATUS_CB) (BD_ADDR, BOOLEAN); 957 958 /* Fixed channel registration info (the callback addresses and channel config) 959 */ 960 typedef struct 961 { 962 tL2CA_FIXED_CHNL_CB *pL2CA_FixedConn_Cb; 963 tL2CA_FIXED_DATA_CB *pL2CA_FixedData_Cb; 964 tL2CA_FIXED_CONGESTION_STATUS_CB *pL2CA_FixedCong_Cb; 965 tL2CAP_FCR_OPTS fixed_chnl_opts; 966 967 UINT16 default_idle_tout; 968 tL2CA_TX_COMPLETE_CB *pL2CA_FixedTxComplete_Cb; /* fixed channel tx complete callback */ 969 } tL2CAP_FIXED_CHNL_REG; 970 971 972 #if (L2CAP_NUM_FIXED_CHNLS > 0) 973 /******************************************************************************* 974 ** 975 ** Function L2CA_RegisterFixedChannel 976 ** 977 ** Description Register a fixed channel. 978 ** 979 ** Parameters: Fixed Channel # 980 ** Channel Callbacks and config 981 ** 982 ** Return value: TRUE if registered OK 983 ** 984 *******************************************************************************/ 985 extern BOOLEAN L2CA_RegisterFixedChannel (UINT16 fixed_cid, tL2CAP_FIXED_CHNL_REG *p_freg); 986 987 /******************************************************************************* 988 ** 989 ** Function L2CA_ConnectFixedChnl 990 ** 991 ** Description Connect an fixed signalling channel to a remote device. 992 ** 993 ** Parameters: Fixed CID 994 ** BD Address of remote 995 ** 996 ** Return value: TRUE if connection started 997 ** 998 *******************************************************************************/ 999 extern BOOLEAN L2CA_ConnectFixedChnl (UINT16 fixed_cid, BD_ADDR bd_addr); 1000 1001 /******************************************************************************* 1002 ** 1003 ** Function L2CA_SendFixedChnlData 1004 ** 1005 ** Description Write data on a fixed signalling channel. 1006 ** 1007 ** Parameters: Fixed CID 1008 ** BD Address of remote 1009 ** Pointer to buffer of type BT_HDR 1010 ** 1011 ** Return value L2CAP_DW_SUCCESS, if data accepted 1012 ** L2CAP_DW_FAILED, if error 1013 ** 1014 *******************************************************************************/ 1015 extern UINT16 L2CA_SendFixedChnlData (UINT16 fixed_cid, BD_ADDR rem_bda, BT_HDR *p_buf); 1016 1017 /******************************************************************************* 1018 ** 1019 ** Function L2CA_RemoveFixedChnl 1020 ** 1021 ** Description Remove a fixed channel to a remote device. 1022 ** 1023 ** Parameters: Fixed CID 1024 ** BD Address of remote 1025 ** Idle timeout to use (or 0xFFFF if don't care) 1026 ** 1027 ** Return value: TRUE if channel removed 1028 ** 1029 *******************************************************************************/ 1030 extern BOOLEAN L2CA_RemoveFixedChnl (UINT16 fixed_cid, BD_ADDR rem_bda); 1031 1032 /******************************************************************************* 1033 ** 1034 ** Function L2CA_SetFixedChannelTout 1035 ** 1036 ** Description Higher layers call this function to set the idle timeout for 1037 ** a fixed channel. The "idle timeout" is the amount of time that 1038 ** a connection can remain up with no L2CAP channels on it. 1039 ** A timeout of zero means that the connection will be torn 1040 ** down immediately when the last channel is removed. 1041 ** A timeout of 0xFFFF means no timeout. Values are in seconds. 1042 ** A bd_addr is the remote BD address. If bd_addr = BT_BD_ANY, 1043 ** then the idle timeouts for all active l2cap links will be 1044 ** changed. 1045 ** 1046 ** Returns TRUE if command succeeded, FALSE if failed 1047 ** 1048 *******************************************************************************/ 1049 extern BOOLEAN L2CA_SetFixedChannelTout (BD_ADDR rem_bda, UINT16 fixed_cid, UINT16 idle_tout); 1050 1051 #endif /* (L2CAP_NUM_FIXED_CHNLS > 0) */ 1052 1053 /******************************************************************************* 1054 ** 1055 ** Function L2CA_GetCurrentConfig 1056 ** 1057 ** Description This function returns configurations of L2CAP channel 1058 ** pp_our_cfg : pointer of our saved configuration options 1059 ** p_our_cfg_bits : valid config in bitmap 1060 ** pp_peer_cfg: pointer of peer's saved configuration options 1061 ** p_peer_cfg_bits : valid config in bitmap 1062 ** 1063 ** Returns TRUE if successful 1064 ** 1065 *******************************************************************************/ 1066 extern BOOLEAN L2CA_GetCurrentConfig (UINT16 lcid, 1067 tL2CAP_CFG_INFO **pp_our_cfg, tL2CAP_CH_CFG_BITS *p_our_cfg_bits, 1068 tL2CAP_CFG_INFO **pp_peer_cfg, tL2CAP_CH_CFG_BITS *p_peer_cfg_bits); 1069 1070 #if (BLE_INCLUDED == TRUE) 1071 /******************************************************************************* 1072 ** 1073 ** Function L2CA_CancelBleConnectReq 1074 ** 1075 ** Description Cancel a pending connection attempt to a BLE device. 1076 ** 1077 ** Parameters: BD Address of remote 1078 ** 1079 ** Return value: TRUE if connection was cancelled 1080 ** 1081 *******************************************************************************/ 1082 extern BOOLEAN L2CA_CancelBleConnectReq (BD_ADDR rem_bda); 1083 1084 /******************************************************************************* 1085 ** 1086 ** Function L2CA_UpdateBleConnParams 1087 ** 1088 ** Description Update BLE connection parameters. 1089 ** 1090 ** Parameters: BD Address of remote 1091 ** 1092 ** Return value: TRUE if update started 1093 ** 1094 *******************************************************************************/ 1095 extern BOOLEAN L2CA_UpdateBleConnParams (BD_ADDR rem_bdRa, UINT16 min_int, 1096 UINT16 max_int, UINT16 latency, UINT16 timeout); 1097 1098 /******************************************************************************* 1099 ** 1100 ** Function L2CA_EnableUpdateBleConnParams 1101 ** 1102 ** Description Update BLE connection parameters. 1103 ** 1104 ** Parameters: BD Address of remote 1105 ** enable flag 1106 ** 1107 ** Return value: TRUE if update started 1108 ** 1109 *******************************************************************************/ 1110 extern BOOLEAN L2CA_EnableUpdateBleConnParams (BD_ADDR rem_bda, BOOLEAN enable); 1111 1112 /******************************************************************************* 1113 ** 1114 ** Function L2CA_GetBleConnRole 1115 ** 1116 ** Description This function returns the connection role. 1117 ** 1118 ** Returns link role. 1119 ** 1120 *******************************************************************************/ 1121 extern UINT8 L2CA_GetBleConnRole (BD_ADDR bd_addr); 1122 1123 /******************************************************************************* 1124 ** 1125 ** Function L2CA_GetDisconnectReason 1126 ** 1127 ** Description This function returns the disconnect reason code. 1128 ** 1129 ** Parameters: BD Address of remote 1130 ** Physical transport for the L2CAP connection (BR/EDR or LE) 1131 ** 1132 ** Returns disconnect reason 1133 ** 1134 *******************************************************************************/ 1135 extern UINT16 L2CA_GetDisconnectReason (BD_ADDR remote_bda, tBT_TRANSPORT transport); 1136 1137 #endif /* (BLE_INCLUDED == TRUE) */ 1138 1139 #ifdef __cplusplus 1140 } 1141 #endif 1142 1143 #endif /* L2C_API_H */ 1144
