1 #Uncommenting these urls would only enable 2 #the power up auto injection and force injection(test case). 3 #XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra3grc.bin 4 #XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra3grc.bin 5 #XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra3grc.bin 6 7 #Version check for XTRA 8 #DISABLE = 0 9 #AUTO = 1 10 #XTRA2 = 2 11 #XTRA3 = 3 12 XTRA_VERSION_CHECK=0 13 14 # Error Estimate 15 # _SET = 1 16 # _CLEAR = 0 17 ERR_ESTIMATE=0 18 19 #Test 20 #NTP_SERVER=time.izatcloud.net 21 #Asia 22 # NTP_SERVER=asia.pool.ntp.org 23 #Europe 24 # NTP_SERVER=europe.pool.ntp.org 25 #North America 26 # NTP_SERVER=north-america.pool.ntp.org 27 28 # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info 29 # 4 - Debug, 5 - Verbose 30 # If DEBUG_LEVEL is commented, Android's logging levels will be used 31 DEBUG_LEVEL = 3 32 33 # Intermediate position report, 1=enable, 0=disable 34 INTERMEDIATE_POS=0 35 36 # Below bit mask configures how GPS functionalities 37 # should be locked when user turns off GPS on Settings 38 # Set bit 0x1 if MO GPS functionalities are to be locked 39 # Set bit 0x2 if NI GPS functionalities are to be locked 40 # default - non is locked for backward compatibility 41 #GPS_LOCK = 3 42 43 # supl version 2.0 44 #SUPL_VER=0x20000 45 46 # Emergency SUPL, 1=enable, 0=disable 47 #SUPL_ES=1 48 49 #Choose PDN for Emergency SUPL 50 #1 - Use emergency PDN 51 #0 - Use regular SUPL PDN for Emergency SUPL 52 USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1 53 54 #SUPL_MODE is a bit mask set in config.xml per carrier by default. 55 #If it is uncommented here, this value will over write the value from 56 #config.xml. 57 #MSA=0X2 58 #MSB=0X1 59 #SUPL_MODE=3 60 61 # GPS Capabilities bit mask 62 # SCHEDULING = 0x01 63 # MSB = 0x02 64 # MSA = 0x04 65 # ON_DEMAND_TIME = 0x10 66 # GEOFENCE = 0x20 67 # default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE 68 CAPABILITIES=0x37 69 70 # Accuracy threshold for intermediate positions 71 # less accurate positions are ignored, 0 for passing all positions 72 # ACCURACY_THRES=5000 73 74 ################################ 75 ##### AGPS server settings ##### 76 ################################ 77 78 # FOR SUPL SUPPORT, set the following 79 # SUPL_HOST=supl.host.com or IP 80 # SUPL_PORT=1234 81 82 # FOR C2K PDE SUPPORT, set the following 83 # C2K_HOST=c2k.pde.com or IP 84 # C2K_PORT=1234 85 86 # Bitmask of slots that are available 87 # for write/install to, where 1s indicate writable, 88 # and the default value is 0 where no slots 89 # are writable. For example, AGPS_CERT_WRITABLE_MASK 90 # of b1000001010 makes 3 slots available 91 # and the remaining 7 slots unwritable. 92 #AGPS_CERT_WRITABLE_MASK=0 93 94 #################################### 95 # LTE Positioning Profile Settings 96 #################################### 97 # 0: Enable RRLP on LTE(Default) 98 # 1: Enable LPP_User_Plane on LTE 99 # 2: Enable LPP_Control_Plane 100 # 3: Enable both LPP_User_Plane and LPP_Control_Plane 101 # LPP_PROFILE = 0 102 103 ################################ 104 # EXTRA SETTINGS 105 ################################ 106 # NMEA provider (1=Modem Processor, 0=Application Processor) 107 NMEA_PROVIDER=0 108 # Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE) 109 SGLTE_TARGET=0 110 111 ################################################## 112 # Select Positioning Protocol on A-GLONASS system 113 ################################################## 114 # 0x1: RRC CPlane 115 # 0x2: RRLP UPlane 116 # 0x4: LLP Uplane 117 # A_GLONASS_POS_PROTOCOL_SELECT = 0 118
