1 page.title=Regulatory Disclosures for ADT-1 2 fullpage=1 3 nonavpage=true 4 5 @jd:body 6 7 <div class="wrap" style="width:940px;"> 8 9 <h1>Regulatory Disclosures for ADT-1</h1> 10 11 <p>Disclosures for the <a href="index.html">ADT-1</a> device.</p> 12 13 <p> 14 Model: W2<br> 15 FCC ID: A4R-W2<br> 16 IC: 10395A-W2 17 </p> 18 19 <p>U.S. Federal Communications Commission Notices</p> 20 <p>To satisfy FCC and IC exposure requirements, a separation distance of at least 20 cm should 21 be maintained between the antenna of this device and persons during device operation. Operations 22 at closer than this distance are not recommended.</p> 23 <p>The antenna used for this transmitter must not be co-located in conjunction with any other 24 antenna or transmitter.</p> 25 <p>This equipment has been tested and found to comply with the limits for a Class B digital 26 device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 27 protection against harmful interference in a residential installation. This equipment generates, 28 uses and can radiate radio frequency energy and, if not installed and used in accordance with the 29 instructions, may cause harmful interference to radio communications. However, there is no 30 guarantee that interference will not occur in a particular installation. If this equipment does 31 cause harmful interference to radio or television reception, which can be determined by turning 32 the equipment off and on, the user is encouraged to try to correct the interference by one or more 33 of the following measures:</p> 34 <p>Reorient or relocate the receiving antenna.</p> 35 <p>Increase the separation between the equipment and receiver.</p> 36 <p>Connect the equipment into an outlet on a circuit different from that to which the receiver 37 is connected.</p> 38 <p>Consult the dealer or an experienced radio/ TV technician for help.</p> 39 <p>This device complies with part 15 of the FCC Rules. Operation is subject to the following two 40 conditions: (1) This device may not cause harmful interference, and (2) this device must accept 41 any interference received, including interference that may cause undesired operation.</p> 42 <p>Changes or modifications not expressly approved by Google Inc. could void the user's 43 authority to operate the equipment.</p> 44 <p>Industry Canada Notices</p> 45 <p>This device complies with Industry Canada licence-exempt RSS standard(s). Operation is 46 subject to the following two conditions: (1) this device may not cause interference, and (2) this 47 device must accept any interference, including interference that may cause undesired operation of 48 the device.</p> 49 <p>Under Industry Canada regulations, this radio transmitter may only operate using an antenna 50 of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce 51 potential radio interference to other users, the antenna type and its gain should be so chosen 52 that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for 53 successful communication.</p> 54 <p>The radiated output power of the Wireless Device is below the Industry Canada (IC) radio 55 frequency exposure limits. The Wireless Device should be used in such a manner such that the 56 potential for human contact during normal operation is minimized.</p> 57 58 <hr /> 59 60 <p>CAN ICES-3 (B)/NMB-3(B)</p> 61 <p> 62 <u>Avis d<em>Industrie Canada</em></u> 63 </p> 64 <p> 65 Le prsent appareil est conforme aux <em>CNR</em> d'Industrie Canada applicables aux appareils 66 radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) 67 l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage 68 radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. 69 </p> 70 <p> 71 En vertu de la rglementation d<em>Industrie Canada</em>, cet metteur radio peut 72 fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour 73 l'metteur par <em>Industrie Canada</em>. Dans le but de rduire les risques de brouillage 74 radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son 75 gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit 76 ncessaire l'tablissement d'une communication satisfaisante. 77 </p> 78 <p> 79 La puissance rayonne en sortie de l'appareil sans fil est infrieure aux limites fixes par 80 <em>Industrie Canada</em> en matire d'exposition aux radiofrquences. L'appareil sans fil 81 doit tre utilis de sorte que la possibilit d'un contact humain pendant le fonctionnement 82 normal soit limite. 83 </p> 84 85 </div> <!-- end.class.wrap --> 86 87 <div class="layout-content-col col-16" style="padding-top:1px"> 88 <!-- layout div, so auto-gen footer sits correctly; do not remove --> 89 </div> 90
