1 Known Limitations {#knownlimitations} 2 =============== 3 4 Some sensors do not work seamlessly with a specific board. This means that they 5 are either incompatible or work only under specific settings. This is a list of 6 such sensors and known workarounds if they exist. 7 8 #### Grove Sensors 9 10 * **Grove I2C Touch Sensor** (MPR121) v1.3 is incompatible with the Intel 11 Edison using the Arduino board, but will work with the Mini-breakout if 12 supplied with at least 4V. Revision v1.2 works well on all Intel boards. 13 * **Grove Nunchuck** only works with the Intel Galileo boards and is unusable 14 on the Intel Edison boards. 15 * **Grove 3-Axis Digital Gyroscope** (ITG-3200) is not compatible with the 16 Intel Edison Arduino board but will work with the Mini-breakout. 17 * **Grove 3-Axis Digital Accelerometer** (ADXL345) only works with the Intel 18 Edison Arduino board when powered from the 3.3V line. 19 * **Grove 3-Axis Digital Compass** (HMC5883L) reports inaccurate values at 5V 20 on the Intel Edison Arduino board and newer revisions might not work at all. 21 Use 3.3V or the Mini-breakout. 22 * **Grove 96x96 OLED Display** will not work on the Intel Edison with Arduino 23 breakout. 24 * **Grove 128x64 OLED Display** will not work on the Intel Edison with Arduino 25 breakout. 26 * **Grove Barometer** (BMP085) has an unstable connection on the Intel Edison 27 using the Arduino breakout and may drop read data. The Xadow version of this 28 sensor (BMP180) is also dropping data packets occasionally. 29 * **Grove Digital Light Sensor** (TSL2561) occasionally drops I2C reads on the 30 Intel Edison with the Arduino breakout. This might cause the sensor not to 31 initialize properly. Works as expected with the Mini-breakout. 32 * **Grove 6-Axis Accelerometer & Compass** (LSM303) fails to write to the 33 configuration register properly and returns invalid data. 34 * **Grove I2C ADC Converter** does not show up on the I2C bus on the Intel 35 Edison with the Arduino board. 36 * **Grove I2C Motor Driver** is not compatible with the Intel Galileo due to 37 the inability to change the I2C bus speed to 100 KHz. 38 * **Grove CO2 Sensor** will return zeroed data and is unusable on the Intel 39 Galileo. 40 * **Grove BLE** (HM-11) does not return data on the Intel Galileo board due to 41 known UART limitation. 42 43 #### Adafruit Sensors 44 45 * **Adafruit Motor Shield** (1438) is not detected on the I2C bus when 46 connected to the Intel Edison with an Arduino breakout. 47 48 #### Other Sensors 49 50 * **NRF24L01** corrupted data packets are sent to the device due to the Intel 51 Edison SPI bus limitation. Sensor works as expected with the Intel Galileo 52 boards. 53 * **NRF8001** based devices do not initialize properly with provided examples 54 on Intel Edison boards also due to SPI bus limitation and data corruption. 55 Works on Intel Galileo. 56 57 #### General 58 59 Some *I2C* sensors add too much capacitance to the SDA line of the Intel Edison 60 Arduino breakout board, thus the signal sticks to a logic 1. When this happens, 61 other sensors connected to the I2C bus are unusable. While there is no generic 62 solution for this limitation, in most cases the sensor works on the Intel 63 Edison Mini-breakout. When this board is not an option, the sensor can be 64 sometimes replaced with the same model from a different vendor. 65 66 The Intel Edison *SPI* bus can corrupt data being sent across when certain 67 sensors are connected to it. Based on the sensor, this can affect functionality 68 slightly or make the sensor entirely unusable. Unlike the I2C bus limitation, 69 different boards are not likely to resolve this. A kernel update on the other 70 hand might help alleviate this. 71 72 On the Intel Galileo boards, the *UART* bus might drop data if several bytes 73 are read at once. 74
