1 /****************************************************************************** 2 * 3 * Copyright (C) 2006-2012 Broadcom Corporation 4 * 5 * Licensed under the Apache License, Version 2.0 (the "License"); 6 * you may not use this file except in compliance with the License. 7 * You may obtain a copy of the License at: 8 * 9 * http://www.apache.org/licenses/LICENSE-2.0 10 * 11 * Unless required by applicable law or agreed to in writing, software 12 * distributed under the License is distributed on an "AS IS" BASIS, 13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 14 * See the License for the specific language governing permissions and 15 * limitations under the License. 16 * 17 ******************************************************************************/ 18 19 /****************************************************************************** 20 * 21 * nterface to AVRCP Application Programming Interface 22 * 23 ******************************************************************************/ 24 #ifndef AVRC_API_H 25 #define AVRC_API_H 26 #include "bt_target.h" 27 #include "avct_api.h" 28 #include "sdp_api.h" 29 #include "avrc_defs.h" 30 31 /***************************************************************************** 32 ** constants 33 *****************************************************************************/ 34 35 /* API function return value result codes. */ 36 #define AVRC_SUCCESS AVCT_SUCCESS /* 0 Function successful */ 37 #define AVRC_NO_RESOURCES AVCT_NO_RESOURCES /* 1 Not enough resources */ 38 #define AVRC_BAD_HANDLE AVCT_BAD_HANDLE /* 2 Bad handle */ 39 #define AVRC_PID_IN_USE AVCT_PID_IN_USE /* 3 PID already in use */ 40 #define AVRC_NOT_OPEN AVCT_NOT_OPEN /* 4 Connection not open */ 41 #define AVRC_MSG_TOO_BIG 5 /* 5 the message length exceed the MTU of the browsing channel */ 42 #define AVRC_FAIL 0x10 /* 0x10 generic failure */ 43 #define AVRC_BAD_PARAM 0x11 /* 0x11 bad parameter */ 44 45 /* Control role - same as AVCT_TARGET/AVCT_CONTROL */ 46 #define AVRC_CT_TARGET 1 /* target */ 47 #define AVRC_CT_CONTROL 2 /* controller */ 48 #define AVRC_CT_PASSIVE 4 /* If conflict, allow the other side to succeed */ 49 50 /* Connection role */ 51 #define AVRC_CONN_INT AVCT_INT /* initiator */ 52 #define AVRC_CONN_ACP AVCT_ACP /* Acceptor */ 53 54 55 /* AVRC CTRL events */ 56 /* AVRC_OPEN_IND_EVT event is sent when the connection is successfully opened. 57 * This eventis sent in response to an AVRC_Open(). */ 58 #define AVRC_OPEN_IND_EVT 0 59 60 /* AVRC_CLOSE_IND_EVT event is sent when a connection is closed. 61 * This event can result from a call to AVRC_Close() or when the peer closes 62 * the connection. It is also sent when a connection attempted through 63 * AVRC_Open() fails. */ 64 #define AVRC_CLOSE_IND_EVT 1 65 66 /* AVRC_CONG_IND_EVT event indicates that AVCTP is congested and cannot send 67 * any more messages. */ 68 #define AVRC_CONG_IND_EVT 2 69 70 /* AVRC_UNCONG_IND_EVT event indicates that AVCTP is uncongested and ready to 71 * send messages. */ 72 #define AVRC_UNCONG_IND_EVT 3 73 74 /* AVRC_BROWSE_OPEN_IND_EVT event is sent when the browse channel is successfully opened. 75 * This eventis sent in response to an AVRC_Open() or AVRC_OpenBrowse() . */ 76 #define AVRC_BROWSE_OPEN_IND_EVT 4 77 78 /* AVRC_BROWSE_CLOSE_IND_EVT event is sent when a browse channel is closed. 79 * This event can result from a call to AVRC_Close(), AVRC_CloseBrowse() or when the peer closes 80 * the connection. It is also sent when a connection attempted through 81 * AVRC_OpenBrowse() fails. */ 82 #define AVRC_BROWSE_CLOSE_IND_EVT 5 83 84 /* AVRC_BROWSE_CONG_IND_EVT event indicates that AVCTP browse channel is congested and cannot send 85 * any more messages. */ 86 #define AVRC_BROWSE_CONG_IND_EVT 6 87 88 /* AVRC_BROWSE_UNCONG_IND_EVT event indicates that AVCTP browse channel is uncongested and ready to 89 * send messages. */ 90 #define AVRC_BROWSE_UNCONG_IND_EVT 7 91 92 /* AVRC_CMD_TIMEOUT_EVT event indicates timeout waiting for AVRC command response from the peer */ 93 #define AVRC_CMD_TIMEOUT_EVT 8 94 95 /* Supported categories */ 96 #define AVRC_SUPF_CT_CAT1 0x0001 /* Category 1 */ 97 #define AVRC_SUPF_CT_CAT2 0x0002 /* Category 2 */ 98 #define AVRC_SUPF_CT_CAT3 0x0004 /* Category 3 */ 99 #define AVRC_SUPF_CT_CAT4 0x0008 /* Category 4 */ 100 #define AVRC_SUPF_CT_APP_SETTINGS 0x0010 /* Player Application Settings */ 101 #define AVRC_SUPF_CT_GROUP_NAVI 0x0020 /* Group Navigation */ 102 #define AVRC_SUPF_CT_BROWSE 0x0040 /* Browsing */ 103 #define AVRC_SUPF_CT_COVER_ART_GET_IMAGE_PROP 0x0080 /* Cover Art, get image property */ 104 #define AVRC_SUPF_CT_COVER_ART_GET_IMAGE 0x0100 /* Cover Art, get image */ 105 #define AVRC_SUPF_CT_COVER_ART_GET_THUMBNAIL 0x0200 /* Cover Art, get Linked Thumbnail */ 106 107 #define AVRC_SUPF_TG_CAT1 0x0001 /* Category 1 */ 108 #define AVRC_SUPF_TG_CAT2 0x0002 /* Category 2 */ 109 #define AVRC_SUPF_TG_CAT3 0x0004 /* Category 3 */ 110 #define AVRC_SUPF_TG_CAT4 0x0008 /* Category 4 */ 111 #define AVRC_SUPF_TG_APP_SETTINGS 0x0010 /* Player Application Settings */ 112 #define AVRC_SUPF_TG_GROUP_NAVI 0x0020 /* Group Navigation */ 113 #define AVRC_SUPF_TG_BROWSE 0x0040 /* Browsing */ 114 #define AVRC_SUPF_TG_MULTI_PLAYER 0x0080 /* Muliple Media Player */ 115 #define AVRC_SUPF_TG_PLAYER_COVER_ART 0x0100 /* Cover Art */ 116 117 #define AVRC_META_SUCCESS AVRC_SUCCESS 118 #define AVRC_META_FAIL AVRC_FAIL 119 #define AVRC_METADATA_CMD 0x0000 120 #define AVRC_METADATA_RESP 0x0001 121 122 123 124 /***************************************************************************** 125 ** data type definitions 126 *****************************************************************************/ 127 128 /* This data type is used in AVRC_FindService() to initialize the SDP database 129 * to hold the result service search. */ 130 typedef struct 131 { 132 UINT32 db_len; /* Length, in bytes, of the discovery database */ 133 tSDP_DISCOVERY_DB *p_db; /* Pointer to the discovery database */ 134 UINT16 num_attr;/* The number of attributes in p_attrs */ 135 UINT16 *p_attrs; /* The attributes filter. If NULL, AVRCP API sets the attribute filter 136 * to be ATTR_ID_SERVICE_CLASS_ID_LIST, ATTR_ID_BT_PROFILE_DESC_LIST, 137 * ATTR_ID_SUPPORTED_FEATURES, ATTR_ID_SERVICE_NAME and ATTR_ID_PROVIDER_NAME. 138 * If not NULL, the input is taken as the filter. */ 139 } tAVRC_SDP_DB_PARAMS; 140 141 /* This callback function returns service discovery information to the 142 * application after the AVRC_FindService() API function is called. The 143 * implementation of this callback function must copy the p_service_name 144 * and p_provider_name parameters passed to it as they are not guaranteed 145 * to remain after the callback function exits. */ 146 typedef void (tAVRC_FIND_CBACK) (UINT16 status); 147 148 149 /* This is the control callback function. This function passes events 150 * listed in Table 20 to the application. */ 151 typedef void (tAVRC_CTRL_CBACK) (UINT8 handle, UINT8 event, UINT16 result, 152 BD_ADDR peer_addr); 153 154 155 /* This is the message callback function. It is executed when AVCTP has 156 * a message packet ready for the application. The implementation of this 157 * callback function must copy the tAVRC_MSG structure passed to it as it 158 * is not guaranteed to remain after the callback function exits. */ 159 typedef void (tAVRC_MSG_CBACK) (UINT8 handle, UINT8 label, UINT8 opcode, 160 tAVRC_MSG *p_msg); 161 162 typedef struct 163 { 164 tAVRC_CTRL_CBACK *p_ctrl_cback; /* pointer to application control callback */ 165 tAVRC_MSG_CBACK *p_msg_cback; /* pointer to application message callback */ 166 UINT32 company_id; /* the company ID */ 167 UINT8 conn; /* Connection role (Initiator/acceptor) */ 168 UINT8 control; /* Control role (Control/Target) */ 169 } tAVRC_CONN_CB; 170 171 172 173 /***************************************************************************** 174 ** external function declarations 175 *****************************************************************************/ 176 #ifdef __cplusplus 177 extern "C" 178 { 179 #endif 180 181 /****************************************************************************** 182 ** 183 ** Function AVRC_AddRecord 184 ** 185 ** Description This function is called to build an AVRCP SDP record. 186 ** Prior to calling this function the application must 187 ** call SDP_CreateRecord() to create an SDP record. 188 ** 189 ** Input Parameters: 190 ** service_uuid: Indicates TG(UUID_SERVCLASS_AV_REM_CTRL_TARGET) 191 ** or CT(UUID_SERVCLASS_AV_REMOTE_CONTROL) 192 ** 193 ** p_service_name: Pointer to a null-terminated character 194 ** string containing the service name. 195 ** If service name is not used set this to NULL. 196 ** 197 ** p_provider_name: Pointer to a null-terminated character 198 ** string containing the provider name. 199 ** If provider name is not used set this to NULL. 200 ** 201 ** categories: Supported categories. 202 ** 203 ** sdp_handle: SDP handle returned by SDP_CreateRecord(). 204 ** 205 ** Output Parameters: 206 ** None. 207 ** 208 ** Returns AVRC_SUCCESS if successful. 209 ** AVRC_NO_RESOURCES if not enough resources to build the SDP record. 210 ** 211 ******************************************************************************/ 212 extern UINT16 AVRC_AddRecord(UINT16 service_uuid, char *p_service_name, 213 char *p_provider_name, UINT16 categories, UINT32 sdp_handle, 214 BOOLEAN browse_supported, UINT16 profile_version); 215 216 /****************************************************************************** 217 ** 218 ** Function AVRC_FindService 219 ** 220 ** Description This function is called by the application to perform service 221 ** discovery and retrieve AVRCP SDP record information from a 222 ** peer device. Information is returned for the first service 223 ** record found on the server that matches the service UUID. 224 ** The callback function will be executed when service discovery 225 ** is complete. There can only be one outstanding call to 226 ** AVRC_FindService() at a time; the application must wait for 227 ** the callback before it makes another call to the function. 228 ** The application is responsible for allocating memory for the 229 ** discovery database. It is recommended that the size of the 230 ** discovery database be at least 300 bytes. The application 231 ** can deallocate the memory after the callback function has 232 ** executed. 233 ** 234 ** Input Parameters: 235 ** service_uuid: Indicates TG(UUID_SERVCLASS_AV_REM_CTRL_TARGET) 236 ** or CT(UUID_SERVCLASS_AV_REMOTE_CONTROL) 237 ** 238 ** bd_addr: BD address of the peer device. 239 ** 240 ** p_db: SDP discovery database parameters. 241 ** 242 ** p_cback: Pointer to the callback function. 243 ** 244 ** Output Parameters: 245 ** None. 246 ** 247 ** Returns AVRC_SUCCESS if successful. 248 ** AVRC_BAD_PARAMS if discovery database parameters are invalid. 249 ** AVRC_NO_RESOURCES if there are not enough resources to 250 ** perform the service search. 251 ** 252 ******************************************************************************/ 253 extern UINT16 AVRC_FindService(UINT16 service_uuid, BD_ADDR bd_addr, 254 tAVRC_SDP_DB_PARAMS *p_db, tAVRC_FIND_CBACK *p_cback); 255 256 /****************************************************************************** 257 ** 258 ** Function AVRC_Open 259 ** 260 ** Description This function is called to open a connection to AVCTP. 261 ** The connection can be either an initiator or acceptor, as 262 ** determined by the p_ccb->stream parameter. 263 ** The connection can be a target, a controller or for both role, 264 ** as determined by the p_ccb->control parameter. 265 ** By definition, a target connection is an acceptor connection 266 ** that waits for an incoming AVCTP connection from the peer. 267 ** The connection remains available to the application until 268 ** the application closes it by calling AVRC_Close(). The 269 ** application does not need to reopen the connection after an 270 ** AVRC_CLOSE_IND_EVT is received. 271 ** 272 ** Input Parameters: 273 ** p_ccb->company_id: Company Identifier. 274 ** 275 ** p_ccb->p_ctrl_cback: Pointer to control callback function. 276 ** 277 ** p_ccb->p_msg_cback: Pointer to message callback function. 278 ** 279 ** p_ccb->conn: AVCTP connection role. This is set to 280 ** AVCTP_INT for initiator connections and AVCTP_ACP 281 ** for acceptor connections. 282 ** 283 ** p_ccb->control: Control role. This is set to 284 ** AVRC_CT_TARGET for target connections, AVRC_CT_CONTROL 285 ** for control connections or (AVRC_CT_TARGET|AVRC_CT_CONTROL) 286 ** for connections that support both roles. 287 ** 288 ** peer_addr: BD address of peer device. This value is 289 ** only used for initiator connections; for acceptor 290 ** connections it can be set to NULL. 291 ** 292 ** Output Parameters: 293 ** p_handle: Pointer to handle. This parameter is only 294 ** valid if AVRC_SUCCESS is returned. 295 ** 296 ** Returns AVRC_SUCCESS if successful. 297 ** AVRC_NO_RESOURCES if there are not enough resources to open 298 ** the connection. 299 ** 300 ******************************************************************************/ 301 extern UINT16 AVRC_Open(UINT8 *p_handle, tAVRC_CONN_CB *p_ccb, 302 BD_ADDR_PTR peer_addr); 303 304 /****************************************************************************** 305 ** 306 ** Function AVRC_Close 307 ** 308 ** Description Close a connection opened with AVRC_Open(). 309 ** This function is called when the 310 ** application is no longer using a connection. 311 ** 312 ** Input Parameters: 313 ** handle: Handle of this connection. 314 ** 315 ** Output Parameters: 316 ** None. 317 ** 318 ** Returns AVRC_SUCCESS if successful. 319 ** AVRC_BAD_HANDLE if handle is invalid. 320 ** 321 ******************************************************************************/ 322 extern UINT16 AVRC_Close(UINT8 handle); 323 324 /****************************************************************************** 325 ** 326 ** Function AVRC_OpenBrowse 327 ** 328 ** Description This function is called to open a browsing connection to AVCTP. 329 ** The connection can be either an initiator or acceptor, as 330 ** determined by the conn_role. 331 ** The handle is returned by a previous call to AVRC_Open. 332 ** 333 ** Returns AVRC_SUCCESS if successful. 334 ** AVRC_NO_RESOURCES if there are not enough resources to open 335 ** the connection. 336 ** 337 ******************************************************************************/ 338 extern UINT16 AVRC_OpenBrowse(UINT8 handle, UINT8 conn_role); 339 340 /****************************************************************************** 341 ** 342 ** Function AVRC_CloseBrowse 343 ** 344 ** Description Close a connection opened with AVRC_OpenBrowse(). 345 ** This function is called when the 346 ** application is no longer using a connection. 347 ** 348 ** Returns AVRC_SUCCESS if successful. 349 ** AVRC_BAD_HANDLE if handle is invalid. 350 ** 351 ******************************************************************************/ 352 extern UINT16 AVRC_CloseBrowse(UINT8 handle); 353 354 /****************************************************************************** 355 ** 356 ** Function AVRC_MsgReq 357 ** 358 ** Description This function is used to send the AVRCP byte stream in p_pkt 359 ** down to AVCTP. 360 ** 361 ** It is expected that p_pkt->offset is at least AVCT_MSG_OFFSET 362 ** p_pkt->layer_specific is AVCT_DATA_CTRL or AVCT_DATA_BROWSE 363 ** p_pkt->event is AVRC_OP_VENDOR, AVRC_OP_PASS_THRU or AVRC_OP_BROWSING 364 ** The above BT_HDR settings are set by the AVRC_Bld* functions. 365 ** 366 ** Returns AVRC_SUCCESS if successful. 367 ** AVRC_BAD_HANDLE if handle is invalid. 368 ** 369 ******************************************************************************/ 370 extern UINT16 AVRC_MsgReq (UINT8 handle, UINT8 label, UINT8 ctype, BT_HDR *p_pkt); 371 372 /****************************************************************************** 373 ** 374 ** Function AVRC_UnitCmd 375 ** 376 ** Description Send a UNIT INFO command to the peer device. This 377 ** function can only be called for controller role connections. 378 ** Any response message from the peer is passed back through 379 ** the tAVRC_MSG_CBACK callback function. 380 ** 381 ** Input Parameters: 382 ** handle: Handle of this connection. 383 ** 384 ** label: Transaction label. 385 ** 386 ** Output Parameters: 387 ** None. 388 ** 389 ** Returns AVRC_SUCCESS if successful. 390 ** AVRC_BAD_HANDLE if handle is invalid. 391 ** 392 ******************************************************************************/ 393 extern UINT16 AVRC_UnitCmd(UINT8 handle, UINT8 label); 394 395 /****************************************************************************** 396 ** 397 ** Function AVRC_SubCmd 398 ** 399 ** Description Send a SUBUNIT INFO command to the peer device. This 400 ** function can only be called for controller role connections. 401 ** Any response message from the peer is passed back through 402 ** the tAVRC_MSG_CBACK callback function. 403 ** 404 ** Input Parameters: 405 ** handle: Handle of this connection. 406 ** 407 ** label: Transaction label. 408 ** 409 ** page: Specifies which part of the subunit type table 410 ** is requested. For AVRCP it is typically zero. 411 ** Value range is 0-7. 412 ** 413 ** Output Parameters: 414 ** None. 415 ** 416 ** Returns AVRC_SUCCESS if successful. 417 ** AVRC_BAD_HANDLE if handle is invalid. 418 ** 419 ******************************************************************************/ 420 extern UINT16 AVRC_SubCmd(UINT8 handle, UINT8 label, UINT8 page); 421 422 423 /****************************************************************************** 424 ** 425 ** Function AVRC_PassCmd 426 ** 427 ** Description Send a PASS THROUGH command to the peer device. This 428 ** function can only be called for controller role connections. 429 ** Any response message from the peer is passed back through 430 ** the tAVRC_MSG_CBACK callback function. 431 ** 432 ** Input Parameters: 433 ** handle: Handle of this connection. 434 ** 435 ** label: Transaction label. 436 ** 437 ** p_msg: Pointer to PASS THROUGH message structure. 438 ** 439 ** Output Parameters: 440 ** None. 441 ** 442 ** Returns AVRC_SUCCESS if successful. 443 ** AVRC_BAD_HANDLE if handle is invalid. 444 ** 445 ******************************************************************************/ 446 extern UINT16 AVRC_PassCmd(UINT8 handle, UINT8 label, tAVRC_MSG_PASS *p_msg); 447 448 /****************************************************************************** 449 ** 450 ** Function AVRC_PassRsp 451 ** 452 ** Description Send a PASS THROUGH response to the peer device. This 453 ** function can only be called for target role connections. 454 ** This function must be called when a PASS THROUGH command 455 ** message is received from the peer through the 456 ** tAVRC_MSG_CBACK callback function. 457 ** 458 ** Input Parameters: 459 ** handle: Handle of this connection. 460 ** 461 ** label: Transaction label. Must be the same value as 462 ** passed with the command message in the callback function. 463 ** 464 ** p_msg: Pointer to PASS THROUGH message structure. 465 ** 466 ** Output Parameters: 467 ** None. 468 ** 469 ** Returns AVRC_SUCCESS if successful. 470 ** AVRC_BAD_HANDLE if handle is invalid. 471 ** 472 ******************************************************************************/ 473 extern UINT16 AVRC_PassRsp(UINT8 handle, UINT8 label, tAVRC_MSG_PASS *p_msg); 474 475 476 /****************************************************************************** 477 ** 478 ** Function AVRC_VendorCmd 479 ** 480 ** Description Send a VENDOR DEPENDENT command to the peer device. This 481 ** function can only be called for controller role connections. 482 ** Any response message from the peer is passed back through 483 ** the tAVRC_MSG_CBACK callback function. 484 ** 485 ** Input Parameters: 486 ** handle: Handle of this connection. 487 ** 488 ** label: Transaction label. 489 ** 490 ** p_msg: Pointer to VENDOR DEPENDENT message structure. 491 ** 492 ** Output Parameters: 493 ** None. 494 ** 495 ** Returns AVRC_SUCCESS if successful. 496 ** AVRC_BAD_HANDLE if handle is invalid. 497 ** 498 ******************************************************************************/ 499 extern UINT16 AVRC_VendorCmd(UINT8 handle, UINT8 label, tAVRC_MSG_VENDOR *p_msg); 500 501 502 /****************************************************************************** 503 ** 504 ** Function AVRC_VendorRsp 505 ** 506 ** Description Send a VENDOR DEPENDENT response to the peer device. This 507 ** function can only be called for target role connections. 508 ** This function must be called when a VENDOR DEPENDENT 509 ** command message is received from the peer through the 510 ** tAVRC_MSG_CBACK callback function. 511 ** 512 ** Input Parameters: 513 ** handle: Handle of this connection. 514 ** 515 ** label: Transaction label. Must be the same value as 516 ** passed with the command message in the callback function. 517 ** 518 ** p_msg: Pointer to VENDOR DEPENDENT message structure. 519 ** 520 ** Output Parameters: 521 ** None. 522 ** 523 ** Returns AVRC_SUCCESS if successful. 524 ** AVRC_BAD_HANDLE if handle is invalid. 525 ** 526 ******************************************************************************/ 527 extern UINT16 AVRC_VendorRsp(UINT8 handle, UINT8 label, tAVRC_MSG_VENDOR *p_msg); 528 529 530 /****************************************************************************** 531 ** 532 ** Function AVRC_SetTraceLevel 533 ** 534 ** Description Sets the trace level for AVRC. If 0xff is passed, the 535 ** current trace level is returned. 536 ** 537 ** Input Parameters: 538 ** new_level: The level to set the AVRC tracing to: 539 ** 0xff-returns the current setting. 540 ** 0-turns off tracing. 541 ** >= 1-Errors. 542 ** >= 2-Warnings. 543 ** >= 3-APIs. 544 ** >= 4-Events. 545 ** >= 5-Debug. 546 ** 547 ** Returns The new trace level or current trace level if 548 ** the input parameter is 0xff. 549 ** 550 ******************************************************************************/ 551 extern UINT8 AVRC_SetTraceLevel (UINT8 new_level); 552 553 /******************************************************************************* 554 ** 555 ** Function AVRC_Init 556 ** 557 ** Description This function is called at stack startup to allocate the 558 ** control block (if using dynamic memory), and initializes the 559 ** control block and tracing level. 560 ** 561 ** Returns void 562 ** 563 *******************************************************************************/ 564 extern void AVRC_Init(void); 565 566 /******************************************************************************* 567 ** 568 ** Function AVRC_Ctrl_ParsCommand 569 ** 570 ** Description This function is used to parse cmds received for CTRL 571 ** Currently it is for SetAbsVolume and Volume Change Notification.. 572 ** 573 ** Returns AVRC_STS_NO_ERROR, if the message in p_data is parsed successfully. 574 ** Otherwise, the error code defined by AVRCP 1.4 575 ** 576 *******************************************************************************/ 577 extern tAVRC_STS AVRC_Ctrl_ParsCommand (tAVRC_MSG *p_msg, tAVRC_COMMAND *p_result); 578 579 /******************************************************************************* 580 ** 581 ** Function AVRC_ParsCommand 582 ** 583 ** Description This function is used to parse the received command. 584 ** 585 ** Returns AVRC_STS_NO_ERROR, if the message in p_data is parsed successfully. 586 ** Otherwise, the error code defined by AVRCP 1.4 587 ** 588 *******************************************************************************/ 589 extern tAVRC_STS AVRC_ParsCommand (tAVRC_MSG *p_msg, tAVRC_COMMAND *p_result, 590 UINT8 *p_buf, UINT16 buf_len); 591 592 /******************************************************************************* 593 ** 594 ** Function AVRC_ParsResponse 595 ** 596 ** Description This function is used to parse the received response. 597 ** 598 ** Returns AVRC_STS_NO_ERROR, if the message in p_data is parsed successfully. 599 ** Otherwise, the error code defined by AVRCP 1.4 600 ** 601 *******************************************************************************/ 602 extern tAVRC_STS AVRC_ParsResponse (tAVRC_MSG *p_msg, tAVRC_RESPONSE *p_result, 603 UINT8 *p_buf, UINT16 buf_len); 604 605 /******************************************************************************* 606 ** 607 ** Function AVRC_Ctrl_ParsResponse 608 ** 609 ** Description This function is a parse response for AVRCP Controller. 610 ** 611 ** Returns AVRC_STS_NO_ERROR, if the message in p_data is parsed successfully. 612 ** Otherwise, the error code defined by AVRCP 1.4 613 ** 614 *******************************************************************************/ 615 extern tAVRC_STS AVRC_Ctrl_ParsResponse (tAVRC_MSG *p_msg, tAVRC_RESPONSE *p_result, 616 UINT8 *p_buf, UINT16* buf_len); 617 618 /******************************************************************************* 619 ** 620 ** Function AVRC_BldCommand 621 ** 622 ** Description This function builds the given AVRCP command to the given 623 ** GKI buffer 624 ** 625 ** Returns AVRC_STS_NO_ERROR, if the command is built successfully 626 ** Otherwise, the error code. 627 ** 628 *******************************************************************************/ 629 extern tAVRC_STS AVRC_BldCommand( tAVRC_COMMAND *p_cmd, BT_HDR **pp_pkt); 630 631 /******************************************************************************* 632 ** 633 ** Function AVRC_BldResponse 634 ** 635 ** Description This function builds the given AVRCP response to the given 636 ** GKI buffer 637 ** 638 ** Returns AVRC_STS_NO_ERROR, if the response is built successfully 639 ** Otherwise, the error code. 640 ** 641 *******************************************************************************/ 642 extern tAVRC_STS AVRC_BldResponse( UINT8 handle, tAVRC_RESPONSE *p_rsp, BT_HDR **pp_pkt); 643 644 /************************************************************************** 645 ** 646 ** Function AVRC_IsValidAvcType 647 ** 648 ** Description Check if correct AVC type is specified 649 ** 650 ** Returns returns TRUE if it is valid 651 ** 652 ** 653 *******************************************************************************/ 654 extern BOOLEAN AVRC_IsValidAvcType(UINT8 pdu_id, UINT8 avc_type); 655 656 /******************************************************************************* 657 ** 658 ** Function AVRC_IsValidPlayerAttr 659 ** 660 ** Description Check if the given attrib value is a valid one 661 ** 662 ** 663 ** Returns returns TRUE if it is valid 664 ** 665 *******************************************************************************/ 666 extern BOOLEAN AVRC_IsValidPlayerAttr(UINT8 attr); 667 668 #ifdef __cplusplus 669 } 670 #endif 671 672 #endif /* AVRC_API_H */ 673
